diff options
Diffstat (limited to 'target/linux/brcm47xx/base-files/etc/init.d')
| -rwxr-xr-x | target/linux/brcm47xx/base-files/etc/init.d/netconfig | 238 | ||||
| -rwxr-xr-x | target/linux/brcm47xx/base-files/etc/init.d/wmacfixup | 33 |
2 files changed, 0 insertions, 271 deletions
diff --git a/target/linux/brcm47xx/base-files/etc/init.d/netconfig b/target/linux/brcm47xx/base-files/etc/init.d/netconfig deleted file mode 100755 index 1890cd0..0000000 --- a/target/linux/brcm47xx/base-files/etc/init.d/netconfig +++ /dev/null @@ -1,238 +0,0 @@ -#!/bin/sh /etc/rc.common -# Copyright (C) 2006 OpenWrt.org - -START=05 - -start() { - [ -e /etc/config/network ] && { - local batch - - config_cb() { - case "$1" in - switch) - option_cb() { - case "$1" in - vlan[0-9]|vlan1[0-5]) - local id="${1#vlan}" - local ports="${2%\*}" - append batch "delete network.eth0.${1}${N}" - append batch "set network.eth0_${id}=switch_vlan${N}" - append batch "set network.eth0_${id}.device=eth0${N}" - append batch "set network.eth0_${id}.vlan=${id}${N}" - append batch "set network.eth0_${id}.ports='${ports}'${N}" - ;; - esac - } - ;; - switch_vlan) - option_cb() { :; } - batch="" - ;; - esac - } - - config_load network - - [ -n "$batch" ] && { - logger -t netconfig "migrating switch config to new format ..." - echo "$batch${N}commit network" | uci batch - } - - exit 0 - } - - mkdir -p /etc/config - - local cpuport=5 - [ -e /sbin/swconfig ] && cpuport=$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p") - local switchname=eth0 - [ -e /sbin/swconfig ] && switchname=$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|switch0: \([^\\\\(]*\).*|\1|p") - local model=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo) - - local network_defs=`( - if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then - # WGT634u - echo boardtype=wgt634u - else - strings "$(find_mtd_part nvram)" - fi - ) | awk -v cpuport="$cpuport" -v model="$model" ' - function macinc(mac, maca, i, result) { - split(mac, maca, ":") - for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i] - if (++maca[6] > 0xff) { - maca[5]++ - maca[6] = 0 - } - for (i = 1; i <= 6; i++) { - if (i != 1) result = result ":" - result = result sprintf("%02x", maca[i]) - } - return result - } - - BEGIN { - FS="=" - c["lan_ifname"]="eth0.1" - c["wan_ifname"]="eth0.2" - c["vlan1ports"]="1 2 3 4 5t" - c["vlan2ports"]="0 5t" - for (i = 0; i < 6; i++) { - if (mac_check != "") mac_check = mac_check ":" - mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]" - } - if (cpuport == "8") { - c["vlan1ports"]="1 2 3 4 8t" - c["vlan2ports"]="0 8t" - } - } - - ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) || \ - ($1 ~ /^vlan[0-9]{1,2}ports$/) { - nvram[$1] = $2 - } - - END { - if (((nvram["vlan0ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8"))) || \ - ((nvram["vlan1ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan2ports"] ~ /^4 8/ && (cpuport == "8"))) || \ - ((nvram["vlan2ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8")))) { - c["vlan1ports"] = "0 1 2 3 8t" - c["vlan2ports"] = "4 8t" - } - if (((nvram["vlan0ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5"))) || \ - ((nvram["vlan1ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan2ports"] ~ /^4 5/ && (cpuport == "5"))) || \ - ((nvram["vlan2ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5")))) { - c["vlan1ports"] = "0 1 2 3 5t" - c["vlan2ports"] = "4 5t" - } - if ((model == "Asus WLHDD") || (model == "Asus WL300G")) { - c["wan_ifname"] = "" - c["lan_ifname"] = "eth1" - } - if (model == "Asus WL330GE") { - c["wan_ifname"] = "" - c["lan_ifname"] = "eth0.1" - c["vlan1ports"] = "4 5t" - c["vlan2ports"] = "" - } - if ((model == "Asus WL500G") || (model == "Microsoft MN-700")) { - c["wan_ifname"] = "eth1" - c["lan_ifname"] = "eth0" - } - if ((model == "Asus WL500GP V2") || (model == "Buffalo WHR-G125")) { - c["vlan1ports"] = "0 1 2 3 5t" - c["vlan2ports"] = "4 5t" - } - if (model == "Dell TrueMobile 2300") { - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - c["vlan1ports"] = "0 1 2 3 4 5" - c["vlan2ports"] = "" - } - if (nvram["boardtype"] == "bcm94710r4") { - # Toshiba WRC-1000 - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - } - if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) { - c["vlan1ports"] = "0 1 2 3 5t" - c["vlan2ports"] = "4 5t" - } - if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) { - if (nvram["boardnum"] == "45") { - # WL-500gP - c["vlan1ports"] = "1 2 3 4 5t" - c["vlan2ports"] = "0 5t" - } else { - # Generic BCM94704 - c["vlan1ports"] = "0 1 2 3 4 5" - c["vlan2ports"] = "" - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - - # MAC addresses on 4704 tend to be screwed up. Add a workaround here - if (nvram["et0macaddr"] ~ mac_check) { - c["lan_macaddr"] = nvram["et0macaddr"] - c["wan_macaddr"] = macinc(c["lan_macaddr"]) - } - } - } - # Buffalo WBR-B11 and Buffalo WBR-G54 - if (nvram["boardtype"] == "bcm94710ap") { - c["vlan1ports"] = "0 1 2 3 4 5" - c["vlan2ports"] = "" - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - } - - # WAP54G - if ((nvram["boardnum"] == "2") || \ - (nvram["boardnum"] == "1024")) { - c["lan_ifname"]="eth0" - c["wan_ifname"]="" - } - - # Sitecom WL-105b - if ((nvram["boardum"] == "2") && \ - (nvram["GemtekPmonVer"] == "1")) { - c["lan_ifname"]="eth0" - c["wan_ifname"]="" - } - - # ASUS WL-700gE - # These are actually same as defaults above. For some reason this script applies - # Generic BCM94704 settings instead so we revert to proper settings here. - # Hopefully someone will fix this properly soon. - if (model == "Asus WL700") { - c["lan_ifname"]="eth0.1" - c["wan_ifname"]="eth0.2" - c["vlan1ports"]="1 2 3 4 5t" - c["vlan2ports"]="0 5t" - } - if ((model == "Motorola WR850G") || (model == "Siemens SE505 V2")) { - c["vlan1ports"]="0 1 2 3 5t" - c["vlan2ports"]="4 5t" - } - if (model == "Asus WL500W") { - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - c["vlan1ports"] = "0 1 2 3 4 5" - c["vlan2ports"] = "" - } - print "local vlan1ports=\"" c["vlan1ports"] "\";" - print "local vlan2ports=\"" c["vlan2ports"] "\";" - print "local lan_ifname=\"" c["lan_ifname"] "\";" - print "local lan_macaddr=\"" c["lan_macaddr"] "\";" - print "local wan_ifname=\"" c["wan_ifname"] "\";" - print "local wan_macaddr=\"" c["wan_macaddr"] "\";" - }'` - - . /lib/functions/uci-defaults.sh - - touch /etc/config/network - - eval "$network_defs" - - [ -n "$vlan1ports" -o -n "$vlan2ports" ] && { - local cfg=`ucidef_add_switch "$switchname" 1 1` - [ -n "$cfg" ] && uci rename network.$cfg=eth0 - [ -n "$vlan1ports" ] && { - cfg=`ucidef_add_switch_vlan "$switchname" 1 "$vlan1ports"` - } - [ -n "$vlan2ports" ] && { - cfg=`ucidef_add_switch_vlan "$switchname" 2 "$vlan2ports"` - } - } - - ucidef_set_interface_loopback - - ucidef_set_interface_lan "$lan_ifname" - [ -n "$lan_macaddr" ] && ucidef_set_interface_macaddr lan "$lan_macaddr" - - [ -n "$wan_ifname" ] && { - ucidef_set_interface_wan "$wan_ifname" - [ -n "$wan_macaddr" ] && ucidef_set_interface_macaddr wan "$wan_macaddr" - } - - uci commit network -} diff --git a/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup b/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup deleted file mode 100755 index ee1b752..0000000 --- a/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup +++ /dev/null @@ -1,33 +0,0 @@ -#!/bin/sh /etc/rc.common -# Copyright (C) 2010 OpenWrt.org - -START=41 - -boot() { - [ -d /sys/class/ieee80211 ] || exit - - commit=0 - - fixup_wmac() { - local cfg="$1" - local cfmac - - config_get cfmac "$cfg" macaddr - - [ "$cfmac" != "00:90:4c:5f:00:2a" ] || { - local nvmac="$(nvram get il0macaddr 2>/dev/null)" - [ -n "$nvmac" ] && [ "$nvmac != "$cfmac ] && { - uci set wireless.$cfg.macaddr="$nvmac" - commit=1 - } - } - } - - config_load wireless - config_foreach fixup_wmac wifi-device - - [ "$commit" = 1 ] && uci commit wireless -} - -start() { :; } -stop() { :; } |