1 files changed, 0 insertions, 89 deletions
diff --git a/target/linux/brcm47xx/patches-3.10/141-MIPS-BCM47XX-add-detection-and-GPIO-config-for-Sieme.patch b/target/linux/brcm47xx/patches-3.10/141-MIPS-BCM47XX-add-detection-and-GPIO-config-for-Sieme.patch
deleted file mode 100644
index 9d19d41..0000000
--- a/target/linux/brcm47xx/patches-3.10/141-MIPS-BCM47XX-add-detection-and-GPIO-config-for-Sieme.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From c546fa49901252cbc1e4046d7188858b2f9e130f Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 10 Jan 2014 23:55:43 +0100
-Subject: [PATCH 2/2] MIPS: BCM47XX: add detection and GPIO config for Siemens
- SE505v2
-
-This adds board detection for the Siemens SE505v2 and the led gpio
-configuration. This board does not have any buttons.
-This is based on OpenWrt broadcom-diag and Manuel Munz's nvram dump.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/board.c                          |   17 +++++++++++++++++
- arch/mips/bcm47xx/leds.c                           |   12 ++++++++++++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h |    2 ++
- 3 files changed, 31 insertions(+)
-
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -181,6 +181,13 @@ struct bcm47xx_board_type_list3 bcm47xx_
- 	{ {0}, NULL},
- };
- 
-+/* boardtype, boardrev */
-+static const
-+struct bcm47xx_board_type_list2 bcm47xx_board_list_board_type_rev[] __initconst = {
-+	{{BCM47XX_BOARD_SIEMENS_SE505V2, "Siemens SE505 V2"}, "0x0101", "0x10"},
-+	{ {0}, NULL},
-+};
-+
- static const
- struct bcm47xx_board_type bcm47xx_board_unknown[] __initconst = {
- 	{BCM47XX_BOARD_UNKNOWN, "Unknown Board"},
-@@ -274,6 +281,16 @@ static __init const struct bcm47xx_board
- 				return &e3->board;
- 		}
- 	}
-+
-+	if (bcm47xx_nvram_getenv("boardtype", buf1, sizeof(buf1)) >= 0 &&
-+	    bcm47xx_nvram_getenv("boardrev", buf2, sizeof(buf2)) >= 0 &&
-+    	    bcm47xx_nvram_getenv("boardnum", buf3, sizeof(buf3)) ==  -ENOENT) {
-+		for (e2 = bcm47xx_board_list_board_type_rev; e2->value1; e2++) {
-+			if (!strcmp(buf1, e2->value1) &&
-+			    !strcmp(buf2, e2->value2))
-+				return &e2->board;
-+		}
-+	}
- 	return bcm47xx_board_unknown;
- }
- 
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -383,6 +383,14 @@ bcm47xx_leds_netgear_wnr834bv2[] __initc
- 	BCM47XX_GPIO_LED(7, "unk", "connected", 0, LEDS_GPIO_DEFSTATE_OFF),
- };
- 
-+/* Siemens */
-+static const struct gpio_led
-+bcm47xx_leds_siemens_se505v2[] __initconst = {
-+	BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(3, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+	BCM47XX_GPIO_LED(5, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+};
-+
- /* SimpleTech */
- 
- static const struct gpio_led
-@@ -562,6 +570,10 @@ void __init bcm47xx_leds_register(void)
- 		bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
- 		break;
- 
-+	case BCM47XX_BOARD_SIEMENS_SE505V2:
-+		bcm47xx_set_pdata(bcm47xx_leds_siemens_se505v2);
-+		break;
-+
- 	case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE:
- 		bcm47xx_set_pdata(bcm47xx_leds_simpletech_simpleshare);
- 		break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -94,6 +94,8 @@ enum bcm47xx_board {
- 
- 	BCM47XX_BOARD_PHICOMM_M1,
- 
-+	BCM47XX_BOARD_SIEMENS_SE505V2,
-+
- 	BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE,
- 
- 	BCM47XX_BOARD_ZTE_H218N,