diff options
Diffstat (limited to 'target/linux/brcm63xx/base-files')
12 files changed, 0 insertions, 538 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh deleted file mode 100755 index bbf5c0b..0000000 --- a/target/linux/brcm63xx/base-files/etc/diag.sh +++ /dev/null @@ -1,23 +0,0 @@ -#!/bin/sh -# Copyright (C) 2007-2013 OpenWrt.org - -. /lib/functions/leds.sh -. /lib/brcm63xx.sh - -set_state() { - case "$1" in - preinit) - status_led_set_timer 200 200 - ;; - failsafe) - status_led_set_timer 50 50 - ;; - done) - if [ "${status_led/power}" != "$status_led" ]; then - status_led_on - else - status_led_off - fi - ;; - esac -} diff --git a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom deleted file mode 100644 index 2d8f1f5..0000000 --- a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/sh -# Based on gabors ralink wisoc implementation. - -rt2x00_eeprom_die() { - echo "rt2x00 eeprom: " "$*" - exit 1 -} - -rt2x00_eeprom_extract() { - local part=$1 - local offset=$2 - local count=$3 - local mtd - - . /lib/functions.sh - - mtd=$(find_mtd_part $part) - [ -n "$mtd" ] || \ - rt2x00_eeprom_die "no mtd device found for partition $part" - - dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count || \ - rt2x00_eeprom_die "failed to extract from $mtd" -} - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/brcm63xx.sh - -board=$board_name - -case "$FIRMWARE" in -"rt2x00.eeprom" ) - case $board in - HW556_C) - rt2x00_eeprom_extract "cal_data" 130560 512 - ;; - *) - rt2x00_eeprom_die "board $board is not supported yet" - ;; - esac - ;; -esac diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds deleted file mode 100644 index 854b3b2..0000000 --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds +++ /dev/null @@ -1,33 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2013-2014 OpenWrt.org -# - -. /lib/functions/uci-defaults.sh -. /lib/brcm63xx.sh - -case "$board_name" in -963281T_TEF) - ucidef_set_led_netdev "lan" "LAN" "A4001N1:green:eth" "eth0" - ucidef_set_led_usbdev "usb" "USB" "A4001N1:green:3g" "1-1" - ;; -96328dg2x2) - ucidef_set_led_usbdev "usb" "USB" "A4001N:green:usb" "1-1" - ;; -'F@ST2704V2') - ucidef_set_led_usbdev "usb" "USB" "F@ST2704V2:green:usb" "1-1" - ;; -HW553) - ucidef_set_led_netdev "lan" "LAN" "HW553:blue:lan" "eth0" - ucidef_set_led_usbdev "usb1" "USB1" "HW553:red:hspa" "1-1" - ucidef_set_led_usbdev "usb2" "USB2" "HW553:blue:hspa" "1-2" - ;; -HW556*) - ucidef_set_led_netdev "lan" "LAN" "HW556:red:dsl" "eth0" - ucidef_set_led_usbdev "usb" "USB" "HW556:red:hspa" "1-2" - ;; -esac - -ucidef_commit_leds - -exit 0 diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network deleted file mode 100755 index 3884e07..0000000 --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network +++ /dev/null @@ -1,139 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2012 OpenWrt.org -# - -[ -e /etc/config/network ] && exit 0 - -touch /etc/config/network - -. /lib/functions/uci-defaults.sh -. /lib/brcm63xx.sh - -ucidef_set_interface_loopback - -case "$board_name" in - -96348W3 |\ -96358-502V |\ -CVG834G_E15R3921 |\ -RTA770BW |\ -RTA770W |\ -SPW500V) - ucidef_set_interface_lan "eth0" - ;; - -96338GW |\ -96338W |\ -96338W2_E7T |\ -96348A-122 |\ -96348W3 |\ -AR1004G |\ -CPVA642 |\ -CT536_CT5621 |\ -CT6373-1 |\ -D-4P-W |\ -"F@ST2604" |\ -RTA1320_16M |\ -V2110) - ucidef_set_interface_lan "eth0" - ucidef_add_switch "eth0" "1" "1" - ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5" - ;; - -96348GW |\ -96348GW-10 |\ -96348GW-11 |\ -96348GW-A |\ -96358VW |\ -96358VW2 |\ -AGPF-S0 |\ -"CPVA502+" |\ -DV201AMR |\ -DWV-S0 |\ -"F@ST2404" |\ -MAGIC |\ -RTA1025W_16 |\ -V2500V_BB) - ucidef_set_interfaces_lan_wan "eth1" "eth0" - ucidef_add_switch "eth1" "1" "1" - ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 4 5" - ;; - -AW4139 |\ -AW4339U |\ -HW553 |\ -HW556*) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "eth0" "1" "1" - ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5t" - ;; - -NB4-* |\ -DVG3810BN |\ -HW6358GW_B) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "eth1" "1" "1" - ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 4 5t" - ;; - -96328avng |\ -96328A-1241N |\ -96328A-1441N1 |\ -963281TAN |\ -963281T_TEF |\ -96328dg2x2 |\ -96368M-1341N |\ -96368M-1541N |\ -96368MVNgr |\ -AW5200B |\ -"F@ST2504n" |\ -"F@ST2704V2" |\ -P870HW-51a_v2) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "eth0" "1" "1" - ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 8t" - ;; - -96368MVWG) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "eth0" "1" "1" - ucidef_add_switch_vlan "eth0" "1" "1 2 4 5 8t" - ;; - -96369R-1231N) - ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "eth0" "1" "1" - ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 5t" - ucidef_add_switch_vlan "eth0" "2" "4 5t" - ;; - -NB6) - ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 9t" - ucidef_add_switch_vlan "switch0" "2" "0 9t" - ;; - -VW6339GU) - ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t" - ucidef_add_switch_vlan "switch0" "2" "4 8t" - ;; - -963268BU_P300) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 3 4 5 6 7 8t" - ;; - -*) - ucidef_set_interfaces_lan_wan "eth1" "eth0" - ;; - -esac - -uci commit network - -exit 0 diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc deleted file mode 100755 index 2840eb1..0000000 --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc +++ /dev/null @@ -1,39 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2007 OpenWrt.org -# -# - -. /lib/brcm63xx.sh - -do_fixcrc() { - mtd fixtrx linux -} - -brcm63xx_detect - -case "$board_name" in - 96328avng |\ - 96328A-1241N |\ - 96328A-1441N1 |\ - 963281TAN |\ - 963281T_TEF |\ - 96328dg2x2 |\ - 96358-502V |\ - 96368M-1341N |\ - 96368M-1541N |\ - 96369R-1231N |\ - AW4339U |\ - "CPVA502+" |\ - CPVA642 |\ - CT6373-1 |\ - MAGIC |\ - P870HW-51a_v2 |\ - RTA770BW |\ - RTA770W |\ - V2110 |\ - V2500V_BB) - do_fixcrc - ;; -esac - diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh deleted file mode 100755 index 58ce71e..0000000 --- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh +++ /dev/null @@ -1,183 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2007 OpenWrt.org -# -# - -board_name="" -status_led="" -status_led2="" -sys_mtd_part="" -brcm63xx_has_reset_button="" -ifname="" - -brcm63xx_detect() { - board_name=$(awk 'BEGIN{FS="[ \t:/]+"} /system type/ {print $4}' /proc/cpuinfo) - - if [ "$board_name" = "96358VW" ] && [ -n "$(swconfig dev eth1 help 2>/dev/null)" ]; then - board_name="DVAG3810BN" - fi - - case "$board_name" in - 963281TAN) - status_led="963281TAN::power" - ifname=eth0 - ;; - 963281T_TEF) - brcm63xx_has_reset_button="true" - status_led="A4001N1:green:power" - ifname=eth0 - ;; - 96328avng) - status_led="96328avng::power" - ifname=eth0 - ;; - 96328dg2x2) - brcm63xx_has_reset_button="true" - status_led="A4001N:green:power" - ifname="eth0" - ;; - 96328A-1241N) - brcm63xx_has_reset_button="true" - status_led="AR-5381u:green:power" - ifname=eth0 - ;; - 96328A-1441N1) - brcm63xx_has_reset_button="true" - status_led="AR-5387un:green:power" - ifname=eth0 - ;; - 96348GW) - status_led="96348GW:green:power" - brcm63xx_has_reset_button="true" - ifname=eth1 - ;; - 96348GW-11) - status_led="96348GW-11:green:power" - brcm63xx_has_reset_button="true" - ifname=eth1 - ;; - 96358-502V) - status_led="spw303v:green:power+adsl" - brcm63xx_has_reset_button="true" - ifname=eth0 - ;; - 96368M-1341N) - brcm63xx_has_reset_button="true" - status_led="VR-3025un:green:power" - ifname="eth0" - ;; - 96368M-1541N) - brcm63xx_has_reset_button="true" - status_led="VR-3025u:green:power" - ifname="eth0" - ;; - 96369R-1231N) - brcm63xx_has_reset_button="true" - status_led="WAP-5813n:green:power" - ifname="eth0" - ;; - AR1004G) - status_led="AR1004G:green:power" - brcm63xx_has_reset_button="true" - ;; - AW4139 |\ - AW4339U) - status_led="dsl-274xb:green:power" - brcm63xx_has_reset_button="true" - ifname=eth0 - ;; - AW5200B) - status_led="dsl-275xb:green:power" - brcm63xx_has_reset_button="true" - ifname=eth0 - ;; - CPVA642) - status_led="CPVA642:green:power:" - brcm63xx_has_reset_button="true" - ifname=eth0 - ;; - CT536_CT5621) - status_led="CT536_CT5621:green:power" - brcm63xx_has_reset_button="true" - ifname=eth0 - ;; - CVG834G_E15R3921) - status_led="CVG834G:green:power" - ifname=eth0 - ;; - D-4P-W) - status_led="D-4P-W:green:power" - brcm63xx_has_reset_button="true" - ifname=eth0 - ;; - "F@ST2504n") - status_led="fast2504n:green:ok" - brcm63xx_has_reset_button="true" - ifname=eth0 - ;; - 'F@ST2704V2') - status_led="F@ST2704V2:green:power" - brcm63xx_has_reset_button="true" - ifname=eth0 - ;; - GW6000) - brcm63xx_has_reset_button="true" - ifname=eth1 - ;; - GW6200) - status_led="GW6200:green:line1" - status_led2="GW6200:green:tel" - brcm63xx_has_reset_button="true" - ifname=eth1 - ;; - HW553) - status_led="HW553:blue:power" - brcm63xx_has_reset_button="true" - ifname=eth0 - ;; - HW556*) - status_led="HW556:red:power" - brcm63xx_has_reset_button="true" - ifname=eth0 - ;; - HW6358GW_B) - status_led="HW520:green:net" - brcm63xx_has_reset_button="true" - ifname="eth0" - ;; - NB6) - brcm63xx_has_reset_button="true" - ifname=eth0 - ;; - P870HW-51a_v2) - brcm63xx_has_reset_button="true" - status_led="P870HW-51a:green:power" - ifname="eth0" - ;; - RTA770BW) - brcm63xx_has_reset_button="true" - status_led="RTA770BW:green:diag" - ifname=eth0 - ;; - RTA770W) - brcm63xx_has_reset_button="true" - status_led="RTA770W:green:diag" - ifname=eth0 - ;; - SPW500V) - status_led="SPW500V:green:power" - brcm63xx_has_reset_button="true" - ifname=eth0 - ;; - V2110) - status_led="V2110:power:green" - brcm63xx_has_reset_button="true" - ifname=eth0 - ;; - *) - ;; - esac -} - -brcm63xx_detect diff --git a/target/linux/brcm63xx/base-files/lib/preinit/03_do_brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/preinit/03_do_brcm63xx.sh deleted file mode 100644 index dd60c49..0000000 --- a/target/linux/brcm63xx/base-files/lib/preinit/03_do_brcm63xx.sh +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/sh - -do_brcm63xx() { - . /lib/brcm63xx.sh -} - -boot_hook_add preinit_main do_brcm63xx diff --git a/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx b/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx deleted file mode 100644 index e1653e3..0000000 --- a/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -failsafe_ip() { - [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { - ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up - } -} - -boot_hook_add failsafe failsafe_ip - diff --git a/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx b/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx deleted file mode 100644 index 1de59b7..0000000 --- a/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/sh - -set_preinit_iface() { - ifconfig $ifname 0.0.0.0 up -} - -boot_hook_add preinit_main set_preinit_iface diff --git a/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx b/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx deleted file mode 100644 index 7655fb7..0000000 --- a/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx +++ /dev/null @@ -1,27 +0,0 @@ -#!/bin/sh - -port_net_echo() { - [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { - if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then - netmsg $pi_broadcast "$1" - fi - } -} - -preinit_ip_deconfig() { - if [ -z "$pi_ifname" ]; then - ifconfig $ifname 0.0.0.0 down - else - grep -q "$pi_ifname" /proc/net/dev && { - ifconfig $pi_ifname 0.0.0.0 down - } - fi -} - -preinit_net_echo() { - preinit_ip - - port_net_echo $1 -} - - diff --git a/target/linux/brcm63xx/base-files/lib/preinit/20_failsafe_net_echo_brcm63xx b/target/linux/brcm63xx/base-files/lib/preinit/20_failsafe_net_echo_brcm63xx deleted file mode 100644 index f030cb2..0000000 --- a/target/linux/brcm63xx/base-files/lib/preinit/20_failsafe_net_echo_brcm63xx +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/sh - -indicate_failsafe() { - preinit_net_echo() { - port_net_echo $1 - } - echo "- failsafe -" - preinit_net_echo "Entering Failsafe!\n" - indicate_failsafe_led -} - - diff --git a/target/linux/brcm63xx/base-files/lib/upgrade/platform.sh b/target/linux/brcm63xx/base-files/lib/upgrade/platform.sh deleted file mode 100644 index 5c9e2c2..0000000 --- a/target/linux/brcm63xx/base-files/lib/upgrade/platform.sh +++ /dev/null @@ -1,16 +0,0 @@ -PART_NAME=linux -platform_check_image() { - [ "$#" -gt 1 ] && return 1 - case "$(get_magic_word "$1")" in - 3600|3700|3800) - # 6348GW-11 boards use openwrt-96348GW-11-squashfs-cfe.bin files - return 0 - ;; - *) - echo "Invalid image type. Please use only .bin files" - return 1 - ;; - esac -} - -# use default for platform_do_upgrade() |