summaryrefslogtreecommitdiff
path: root/target/linux/etrax/patches/cris/010-multi-target-build.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/etrax/patches/cris/010-multi-target-build.patch')
-rw-r--r--target/linux/etrax/patches/cris/010-multi-target-build.patch1973
1 files changed, 0 insertions, 1973 deletions
diff --git a/target/linux/etrax/patches/cris/010-multi-target-build.patch b/target/linux/etrax/patches/cris/010-multi-target-build.patch
deleted file mode 100644
index 9d3a28b..0000000
--- a/target/linux/etrax/patches/cris/010-multi-target-build.patch
+++ /dev/null
@@ -1,1973 +0,0 @@
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/Makefile
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/Makefile 2007-05-28 16:28:34.000000000 +0200
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/Makefile 2007-05-28 17:24:26.000000000 +0200
-@@ -5,7 +5,7 @@
- OBJCOPY = /usr/local/cris/objcopy-cris
- OBJCOPYFLAGS = -O binary --remove-section=.bss
-
--subdir- := compressed rescue
-+subdir- := compressed
- targets := Image
-
- $(obj)/Image: vmlinux FORCE
-@@ -14,8 +14,12 @@
-
- $(obj)/compressed/vmlinux: $(obj)/Image FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed $@
-- $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-
- $(obj)/zImage: $(obj)/compressed/vmlinux
- @cp $< $@
-+ @cp $(obj)/compressed/vmlinux $(obj)/zImage_custom
-+ @cp $(obj)/compressed/vmlinux_MCM $(obj)/zImage_MCM
-+ @cp $(obj)/compressed/vmlinux_416 $(obj)/zImage_416
-+ @cp $(obj)/compressed/vmlinux_816 $(obj)/zImage_816
-+ @cp $(obj)/compressed/vmlinux_832 $(obj)/zImage_832
- @echo ' Kernel: $@ is ready'
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/Makefile
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/Makefile 2007-05-28 16:28:34.000000000 +0200
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/Makefile 2007-05-28 17:03:02.000000000 +0200
-@@ -17,18 +17,34 @@
-
- $(obj)/decompress.o: $(OBJECTS) FORCE
- $(call if_changed,ld)
-+ $(LD) $(LDFLAGS) arch/cris/boot/compressed/head_MCM.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_MCM.o
-+ $(LD) $(LDFLAGS) arch/cris/boot/compressed/head_416.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_416.o
-+ $(LD) $(LDFLAGS) arch/cris/boot/compressed/head_816.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_816.o
-+ $(LD) $(LDFLAGS) arch/cris/boot/compressed/head_832.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_832.o
-
- $(obj)/decompress.bin: $(obj)/decompress.o FORCE
- $(call if_changed,objcopy)
-+ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_MCM.o $(obj)/decompress_MCM.bin
-+ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_416.o $(obj)/decompress_416.bin
-+ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_816.o $(obj)/decompress_816.bin
-+ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_832.o $(obj)/decompress_832.bin
-+
-+$(obj)/head.o: $(obj)/head.S .config FORCE
-+ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c $< -o $@
-+ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_MCM.S -o arch/cris/boot/compressed/head_MCM.o
-+ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_416.S -o arch/cris/boot/compressed/head_416.o
-+ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_816.S -o arch/cris/boot/compressed/head_816.o
-+ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_832.S -o arch/cris/boot/compressed/head_832.o
-
--$(obj)/head.o: $(obj)/head.S .config
-- /usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__ASSEMBLY__ -traditional -c $< -o $@
--
--$(obj)/misc.o: $(obj)/misc.c .config
-+$(obj)/misc.o: $(obj)/misc.c .config FORCE
- /usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__KERNEL__ -c $< -o $@
-
- $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
- $(call if_changed,image)
-+ cat $(obj)/decompress_MCM.bin $(obj)/piggy.gz > $(obj)/vmlinux_MCM
-+ cat $(obj)/decompress_416.bin $(obj)/piggy.gz > $(obj)/vmlinux_416
-+ cat $(obj)/decompress_816.bin $(obj)/piggy.gz > $(obj)/vmlinux_816
-+ cat $(obj)/decompress_832.bin $(obj)/piggy.gz > $(obj)/vmlinux_832
-
- $(obj)/piggy.gz: $(obj)/../Image FORCE
- $(call if_changed,gzip)
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init.S 2007-05-28 16:42:15.000000000 +0200
-@@ -0,0 +1,207 @@
-+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
-+ *
-+ * DRAM/SDRAM initialization - alter with care
-+ * This file is intended to be included from other assembler files
-+ *
-+ * Note: This file may not modify r9 because r9 is used to carry
-+ * information from the decompresser to the kernel
-+ *
-+ * Copyright (C) 2000, 2001 Axis Communications AB
-+ *
-+ * Authors: Mikael Starvik (starvik@axis.com)
-+ *
-+ * $Log: dram_init.S,v $
-+ * Revision 1.5 2006/10/13 12:43:11 starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.4 2003/09/22 09:21:59 starvik
-+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
-+ * so we need to mask off 12 bits.
-+ *
-+ * Revision 1.3 2003/03/31 09:38:37 starvik
-+ * Corrected calculation of end of sdram init commands
-+ *
-+ * Revision 1.2 2002/11/19 13:33:29 starvik
-+ * Changes from Linux 2.4
-+ *
-+ * Revision 1.13 2002/10/30 07:42:28 starvik
-+ * Always read SDRAM command sequence from flash
-+ *
-+ * Revision 1.12 2002/08/09 11:37:37 orjanf
-+ * Added double initialization work-around for Samsung SDRAMs.
-+ *
-+ * Revision 1.11 2002/06/04 11:43:21 starvik
-+ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
-+ *
-+ * Revision 1.10 2001/10/04 12:00:21 martinnn
-+ * Added missing underscores.
-+ *
-+ * Revision 1.9 2001/10/01 14:47:35 bjornw
-+ * Added register prefixes and removed underscores
-+ *
-+ * Revision 1.8 2001/05/15 07:12:45 hp
-+ * Copy warning from head.S about r8 and r9
-+ *
-+ * Revision 1.7 2001/04/18 12:05:39 bjornw
-+ * Fixed comments, and explicitely include config.h to be sure its there
-+ *
-+ * Revision 1.6 2001/04/10 06:20:16 starvik
-+ * Delay should be 200us, not 200ns
-+ *
-+ * Revision 1.5 2001/04/09 06:01:13 starvik
-+ * Added support for 100 MHz SDRAMs
-+ *
-+ * Revision 1.4 2001/03/26 14:24:01 bjornw
-+ * Namechange of some config options
-+ *
-+ * Revision 1.3 2001/03/23 08:29:41 starvik
-+ * Corrected calculation of mrs_data
-+ *
-+ * Revision 1.2 2001/02/08 15:20:00 starvik
-+ * Corrected SDRAM initialization
-+ * Should now be included as inline
-+ *
-+ * Revision 1.1 2001/01/29 13:08:02 starvik
-+ * Initial version
-+ * This file should be included from all assembler files that needs to
-+ * initialize DRAM/SDRAM.
-+ *
-+ */
-+
-+/* Just to be certain the config file is included, we include it here
-+ * explicitely instead of depending on it being included in the file that
-+ * uses this code.
-+ */
-+
-+
-+ ;; WARNING! The registers r8 and r9 are used as parameters carrying
-+ ;; information from the decompressor (if the kernel was compressed).
-+ ;; They should not be used in the code below.
-+
-+#ifndef CONFIG_SVINTO_SIM
-+ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
-+ move.d $r0, [R_WAITSTATES]
-+
-+ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
-+ move.d $r0, [R_BUS_CONFIG]
-+
-+#ifndef CONFIG_ETRAX_SDRAM
-+ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
-+ move.d $r0, [R_DRAM_CONFIG]
-+
-+ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
-+ move.d $r0, [R_DRAM_TIMING]
-+#else
-+ ;; Samsung SDRAMs seem to require to be initialized twice to work properly.
-+ moveq 2, $r6
-+_sdram_init:
-+
-+ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
-+
-+ ; Bank configuration
-+ move.d CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r0
-+ move.d $r0, [R_SDRAM_CONFIG]
-+
-+ ; Calculate value of mrs_data
-+ ; CAS latency = 2 && bus_width = 32 => 0x40
-+ ; CAS latency = 3 && bus_width = 32 => 0x60
-+ ; CAS latency = 2 && bus_width = 16 => 0x20
-+ ; CAS latency = 3 && bus_width = 16 => 0x30
-+
-+ ; Check if value is already supplied in kernel config
-+ move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r2
-+ and.d 0x00ff0000, $r2
-+ bne _set_timing
-+ lsrq 16, $r2
-+
-+ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2
-+ move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1
-+ move.d $r1, $r3
-+ and.d 0x03, $r1 ; Get CAS latency
-+ and.d 0x1000, $r3 ; 50 or 100 MHz?
-+ beq _speed_50
-+ nop
-+_speed_100:
-+ cmp.d 0x00, $r1 ; CAS latency = 2?
-+ beq _bw_check
-+ nop
-+ or.d 0x20, $r2 ; CAS latency = 3
-+ ba _bw_check
-+ nop
-+_speed_50:
-+ cmp.d 0x01, $r1 ; CAS latency = 2?
-+ beq _bw_check
-+ nop
-+ or.d 0x20, $r2 ; CAS latency = 3
-+_bw_check:
-+ move.d CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r1
-+ and.d 0x800000, $r1 ; DRAM width is bit 23
-+ bne _set_timing
-+ nop
-+ lsrq 1, $r2 ; 16 bits. Shift down value.
-+
-+ ; Set timing parameters. Starts master clock
-+_set_timing:
-+ move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1
-+ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0
-+ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set
-+ move.d $r1, $r5
-+ or.d 0x0000c000, $r1 ; ref = disable
-+ lslq 16, $r2 ; mrs data starts at bit 16
-+ or.d $r2, $r1
-+ move.d $r1, [R_SDRAM_TIMING]
-+
-+ ; Wait 200us
-+ move.d 10000, $r2
-+1: bne 1b
-+ subq 1, $r2
-+
-+ ; Issue initialization command sequence
-+ move.d _sdram_commands_start, $r2
-+ and.d 0x000fffff, $r2 ; Make sure commands are read from flash
-+ move.d _sdram_commands_end, $r3
-+ and.d 0x000fffff, $r3
-+1: clear.d $r4
-+ move.b [$r2+], $r4
-+ lslq 9, $r4 ; Command starts at bit 9
-+ or.d $r1, $r4
-+ move.d $r4, [R_SDRAM_TIMING]
-+ nop ; Wait five nop cycles between each command
-+ nop
-+ nop
-+ nop
-+ nop
-+ cmp.d $r2, $r3
-+ bne 1b
-+ nop
-+ move.d $r5, [R_SDRAM_TIMING]
-+ subq 1, $r6
-+ bne _sdram_init
-+ nop
-+ ba _sdram_commands_end
-+ nop
-+
-+_sdram_commands_start:
-+ .byte 3 ; Precharge
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 1 ; mrs
-+ .byte 0 ; nop
-+_sdram_commands_end:
-+#endif
-+#endif
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_416.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_416.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_416.S 2007-05-28 20:02:25.000000000 +0200
-@@ -0,0 +1,207 @@
-+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
-+ *
-+ * DRAM/SDRAM initialization - alter with care
-+ * This file is intended to be included from other assembler files
-+ *
-+ * Note: This file may not modify r9 because r9 is used to carry
-+ * information from the decompresser to the kernel
-+ *
-+ * Copyright (C) 2000, 2001 Axis Communications AB
-+ *
-+ * Authors: Mikael Starvik (starvik@axis.com)
-+ *
-+ * $Log: dram_init.S,v $
-+ * Revision 1.5 2006/10/13 12:43:11 starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.4 2003/09/22 09:21:59 starvik
-+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
-+ * so we need to mask off 12 bits.
-+ *
-+ * Revision 1.3 2003/03/31 09:38:37 starvik
-+ * Corrected calculation of end of sdram init commands
-+ *
-+ * Revision 1.2 2002/11/19 13:33:29 starvik
-+ * Changes from Linux 2.4
-+ *
-+ * Revision 1.13 2002/10/30 07:42:28 starvik
-+ * Always read SDRAM command sequence from flash
-+ *
-+ * Revision 1.12 2002/08/09 11:37:37 orjanf
-+ * Added double initialization work-around for Samsung SDRAMs.
-+ *
-+ * Revision 1.11 2002/06/04 11:43:21 starvik
-+ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
-+ *
-+ * Revision 1.10 2001/10/04 12:00:21 martinnn
-+ * Added missing underscores.
-+ *
-+ * Revision 1.9 2001/10/01 14:47:35 bjornw
-+ * Added register prefixes and removed underscores
-+ *
-+ * Revision 1.8 2001/05/15 07:12:45 hp
-+ * Copy warning from head.S about r8 and r9
-+ *
-+ * Revision 1.7 2001/04/18 12:05:39 bjornw
-+ * Fixed comments, and explicitely include config.h to be sure its there
-+ *
-+ * Revision 1.6 2001/04/10 06:20:16 starvik
-+ * Delay should be 200us, not 200ns
-+ *
-+ * Revision 1.5 2001/04/09 06:01:13 starvik
-+ * Added support for 100 MHz SDRAMs
-+ *
-+ * Revision 1.4 2001/03/26 14:24:01 bjornw
-+ * Namechange of some config options
-+ *
-+ * Revision 1.3 2001/03/23 08:29:41 starvik
-+ * Corrected calculation of mrs_data
-+ *
-+ * Revision 1.2 2001/02/08 15:20:00 starvik
-+ * Corrected SDRAM initialization
-+ * Should now be included as inline
-+ *
-+ * Revision 1.1 2001/01/29 13:08:02 starvik
-+ * Initial version
-+ * This file should be included from all assembler files that needs to
-+ * initialize DRAM/SDRAM.
-+ *
-+ */
-+
-+/* Just to be certain the config file is included, we include it here
-+ * explicitely instead of depending on it being included in the file that
-+ * uses this code.
-+ */
-+
-+
-+ ;; WARNING! The registers r8 and r9 are used as parameters carrying
-+ ;; information from the decompressor (if the kernel was compressed).
-+ ;; They should not be used in the code below.
-+
-+#ifndef CONFIG_SVINTO_SIM
-+ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
-+ move.d $r0, [R_WAITSTATES]
-+
-+ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
-+ move.d $r0, [R_BUS_CONFIG]
-+
-+#ifndef CONFIG_ETRAX_SDRAM
-+ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
-+ move.d $r0, [R_DRAM_CONFIG]
-+
-+ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
-+ move.d $r0, [R_DRAM_TIMING]
-+#else
-+ ;; Samsung SDRAMs seem to require to be initialized twice to work properly.
-+ moveq 2, $r6
-+_sdram_init:
-+
-+ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
-+
-+ ; Bank configuration
-+ move.d 0x09603636, $r0
-+ move.d $r0, [R_SDRAM_CONFIG]
-+
-+ ; Calculate value of mrs_data
-+ ; CAS latency = 2 && bus_width = 32 => 0x40
-+ ; CAS latency = 3 && bus_width = 32 => 0x60
-+ ; CAS latency = 2 && bus_width = 16 => 0x20
-+ ; CAS latency = 3 && bus_width = 16 => 0x30
-+
-+ ; Check if value is already supplied in kernel config
-+ move.d 0x80008002, $r2
-+ and.d 0x00ff0000, $r2
-+ bne _set_timing
-+ lsrq 16, $r2
-+
-+ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2
-+ move.d 0x80008002, $r1
-+ move.d $r1, $r3
-+ and.d 0x03, $r1 ; Get CAS latency
-+ and.d 0x1000, $r3 ; 50 or 100 MHz?
-+ beq _speed_50
-+ nop
-+_speed_100:
-+ cmp.d 0x00, $r1 ; CAS latency = 2?
-+ beq _bw_check
-+ nop
-+ or.d 0x20, $r2 ; CAS latency = 3
-+ ba _bw_check
-+ nop
-+_speed_50:
-+ cmp.d 0x01, $r1 ; CAS latency = 2?
-+ beq _bw_check
-+ nop
-+ or.d 0x20, $r2 ; CAS latency = 3
-+_bw_check:
-+ move.d 0x09603636, $r1
-+ and.d 0x800000, $r1 ; DRAM width is bit 23
-+ bne _set_timing
-+ nop
-+ lsrq 1, $r2 ; 16 bits. Shift down value.
-+
-+ ; Set timing parameters. Starts master clock
-+_set_timing:
-+ move.d 0x80008002, $r1
-+ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0
-+ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set
-+ move.d $r1, $r5
-+ or.d 0x0000c000, $r1 ; ref = disable
-+ lslq 16, $r2 ; mrs data starts at bit 16
-+ or.d $r2, $r1
-+ move.d $r1, [R_SDRAM_TIMING]
-+
-+ ; Wait 200us
-+ move.d 10000, $r2
-+1: bne 1b
-+ subq 1, $r2
-+
-+ ; Issue initialization command sequence
-+ move.d _sdram_commands_start, $r2
-+ and.d 0x000fffff, $r2 ; Make sure commands are read from flash
-+ move.d _sdram_commands_end, $r3
-+ and.d 0x000fffff, $r3
-+1: clear.d $r4
-+ move.b [$r2+], $r4
-+ lslq 9, $r4 ; Command starts at bit 9
-+ or.d $r1, $r4
-+ move.d $r4, [R_SDRAM_TIMING]
-+ nop ; Wait five nop cycles between each command
-+ nop
-+ nop
-+ nop
-+ nop
-+ cmp.d $r2, $r3
-+ bne 1b
-+ nop
-+ move.d $r5, [R_SDRAM_TIMING]
-+ subq 1, $r6
-+ bne _sdram_init
-+ nop
-+ ba _sdram_commands_end
-+ nop
-+
-+_sdram_commands_start:
-+ .byte 3 ; Precharge
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 1 ; mrs
-+ .byte 0 ; nop
-+_sdram_commands_end:
-+#endif
-+#endif
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_816.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_816.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_816.S 2007-05-28 20:04:05.000000000 +0200
-@@ -0,0 +1,207 @@
-+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
-+ *
-+ * DRAM/SDRAM initialization - alter with care
-+ * This file is intended to be included from other assembler files
-+ *
-+ * Note: This file may not modify r9 because r9 is used to carry
-+ * information from the decompresser to the kernel
-+ *
-+ * Copyright (C) 2000, 2001 Axis Communications AB
-+ *
-+ * Authors: Mikael Starvik (starvik@axis.com)
-+ *
-+ * $Log: dram_init.S,v $
-+ * Revision 1.5 2006/10/13 12:43:11 starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.4 2003/09/22 09:21:59 starvik
-+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
-+ * so we need to mask off 12 bits.
-+ *
-+ * Revision 1.3 2003/03/31 09:38:37 starvik
-+ * Corrected calculation of end of sdram init commands
-+ *
-+ * Revision 1.2 2002/11/19 13:33:29 starvik
-+ * Changes from Linux 2.4
-+ *
-+ * Revision 1.13 2002/10/30 07:42:28 starvik
-+ * Always read SDRAM command sequence from flash
-+ *
-+ * Revision 1.12 2002/08/09 11:37:37 orjanf
-+ * Added double initialization work-around for Samsung SDRAMs.
-+ *
-+ * Revision 1.11 2002/06/04 11:43:21 starvik
-+ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
-+ *
-+ * Revision 1.10 2001/10/04 12:00:21 martinnn
-+ * Added missing underscores.
-+ *
-+ * Revision 1.9 2001/10/01 14:47:35 bjornw
-+ * Added register prefixes and removed underscores
-+ *
-+ * Revision 1.8 2001/05/15 07:12:45 hp
-+ * Copy warning from head.S about r8 and r9
-+ *
-+ * Revision 1.7 2001/04/18 12:05:39 bjornw
-+ * Fixed comments, and explicitely include config.h to be sure its there
-+ *
-+ * Revision 1.6 2001/04/10 06:20:16 starvik
-+ * Delay should be 200us, not 200ns
-+ *
-+ * Revision 1.5 2001/04/09 06:01:13 starvik
-+ * Added support for 100 MHz SDRAMs
-+ *
-+ * Revision 1.4 2001/03/26 14:24:01 bjornw
-+ * Namechange of some config options
-+ *
-+ * Revision 1.3 2001/03/23 08:29:41 starvik
-+ * Corrected calculation of mrs_data
-+ *
-+ * Revision 1.2 2001/02/08 15:20:00 starvik
-+ * Corrected SDRAM initialization
-+ * Should now be included as inline
-+ *
-+ * Revision 1.1 2001/01/29 13:08:02 starvik
-+ * Initial version
-+ * This file should be included from all assembler files that needs to
-+ * initialize DRAM/SDRAM.
-+ *
-+ */
-+
-+/* Just to be certain the config file is included, we include it here
-+ * explicitely instead of depending on it being included in the file that
-+ * uses this code.
-+ */
-+
-+
-+ ;; WARNING! The registers r8 and r9 are used as parameters carrying
-+ ;; information from the decompressor (if the kernel was compressed).
-+ ;; They should not be used in the code below.
-+
-+#ifndef CONFIG_SVINTO_SIM
-+ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
-+ move.d $r0, [R_WAITSTATES]
-+
-+ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
-+ move.d $r0, [R_BUS_CONFIG]
-+
-+#ifndef CONFIG_ETRAX_SDRAM
-+ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
-+ move.d $r0, [R_DRAM_CONFIG]
-+
-+ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
-+ move.d $r0, [R_DRAM_TIMING]
-+#else
-+ ;; Samsung SDRAMs seem to require to be initialized twice to work properly.
-+ moveq 2, $r6
-+_sdram_init:
-+
-+ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
-+
-+ ; Bank configuration
-+ move.d 0x09603636, $r0
-+ move.d $r0, [R_SDRAM_CONFIG]
-+
-+ ; Calculate value of mrs_data
-+ ; CAS latency = 2 && bus_width = 32 => 0x40
-+ ; CAS latency = 3 && bus_width = 32 => 0x60
-+ ; CAS latency = 2 && bus_width = 16 => 0x20
-+ ; CAS latency = 3 && bus_width = 16 => 0x30
-+
-+ ; Check if value is already supplied in kernel config
-+ move.d 0x80008002, $r2
-+ and.d 0x00ff0000, $r2
-+ bne _set_timing
-+ lsrq 16, $r2
-+
-+ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2
-+ move.d 0x80008002, $r1
-+ move.d $r1, $r3
-+ and.d 0x03, $r1 ; Get CAS latency
-+ and.d 0x1000, $r3 ; 50 or 100 MHz?
-+ beq _speed_50
-+ nop
-+_speed_100:
-+ cmp.d 0x00, $r1 ; CAS latency = 2?
-+ beq _bw_check
-+ nop
-+ or.d 0x20, $r2 ; CAS latency = 3
-+ ba _bw_check
-+ nop
-+_speed_50:
-+ cmp.d 0x01, $r1 ; CAS latency = 2?
-+ beq _bw_check
-+ nop
-+ or.d 0x20, $r2 ; CAS latency = 3
-+_bw_check:
-+ move.d 0x09603636, $r1
-+ and.d 0x800000, $r1 ; DRAM width is bit 23
-+ bne _set_timing
-+ nop
-+ lsrq 1, $r2 ; 16 bits. Shift down value.
-+
-+ ; Set timing parameters. Starts master clock
-+_set_timing:
-+ move.d 0x80008002, $r1
-+ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0
-+ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set
-+ move.d $r1, $r5
-+ or.d 0x0000c000, $r1 ; ref = disable
-+ lslq 16, $r2 ; mrs data starts at bit 16
-+ or.d $r2, $r1
-+ move.d $r1, [R_SDRAM_TIMING]
-+
-+ ; Wait 200us
-+ move.d 10000, $r2
-+1: bne 1b
-+ subq 1, $r2
-+
-+ ; Issue initialization command sequence
-+ move.d _sdram_commands_start, $r2
-+ and.d 0x000fffff, $r2 ; Make sure commands are read from flash
-+ move.d _sdram_commands_end, $r3
-+ and.d 0x000fffff, $r3
-+1: clear.d $r4
-+ move.b [$r2+], $r4
-+ lslq 9, $r4 ; Command starts at bit 9
-+ or.d $r1, $r4
-+ move.d $r4, [R_SDRAM_TIMING]
-+ nop ; Wait five nop cycles between each command
-+ nop
-+ nop
-+ nop
-+ nop
-+ cmp.d $r2, $r3
-+ bne 1b
-+ nop
-+ move.d $r5, [R_SDRAM_TIMING]
-+ subq 1, $r6
-+ bne _sdram_init
-+ nop
-+ ba _sdram_commands_end
-+ nop
-+
-+_sdram_commands_start:
-+ .byte 3 ; Precharge
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 1 ; mrs
-+ .byte 0 ; nop
-+_sdram_commands_end:
-+#endif
-+#endif
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_832.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_832.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_832.S 2007-05-28 20:04:57.000000000 +0200
-@@ -0,0 +1,207 @@
-+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
-+ *
-+ * DRAM/SDRAM initialization - alter with care
-+ * This file is intended to be included from other assembler files
-+ *
-+ * Note: This file may not modify r9 because r9 is used to carry
-+ * information from the decompresser to the kernel
-+ *
-+ * Copyright (C) 2000, 2001 Axis Communications AB
-+ *
-+ * Authors: Mikael Starvik (starvik@axis.com)
-+ *
-+ * $Log: dram_init.S,v $
-+ * Revision 1.5 2006/10/13 12:43:11 starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.4 2003/09/22 09:21:59 starvik
-+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
-+ * so we need to mask off 12 bits.
-+ *
-+ * Revision 1.3 2003/03/31 09:38:37 starvik
-+ * Corrected calculation of end of sdram init commands
-+ *
-+ * Revision 1.2 2002/11/19 13:33:29 starvik
-+ * Changes from Linux 2.4
-+ *
-+ * Revision 1.13 2002/10/30 07:42:28 starvik
-+ * Always read SDRAM command sequence from flash
-+ *
-+ * Revision 1.12 2002/08/09 11:37:37 orjanf
-+ * Added double initialization work-around for Samsung SDRAMs.
-+ *
-+ * Revision 1.11 2002/06/04 11:43:21 starvik
-+ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
-+ *
-+ * Revision 1.10 2001/10/04 12:00:21 martinnn
-+ * Added missing underscores.
-+ *
-+ * Revision 1.9 2001/10/01 14:47:35 bjornw
-+ * Added register prefixes and removed underscores
-+ *
-+ * Revision 1.8 2001/05/15 07:12:45 hp
-+ * Copy warning from head.S about r8 and r9
-+ *
-+ * Revision 1.7 2001/04/18 12:05:39 bjornw
-+ * Fixed comments, and explicitely include config.h to be sure its there
-+ *
-+ * Revision 1.6 2001/04/10 06:20:16 starvik
-+ * Delay should be 200us, not 200ns
-+ *
-+ * Revision 1.5 2001/04/09 06:01:13 starvik
-+ * Added support for 100 MHz SDRAMs
-+ *
-+ * Revision 1.4 2001/03/26 14:24:01 bjornw
-+ * Namechange of some config options
-+ *
-+ * Revision 1.3 2001/03/23 08:29:41 starvik
-+ * Corrected calculation of mrs_data
-+ *
-+ * Revision 1.2 2001/02/08 15:20:00 starvik
-+ * Corrected SDRAM initialization
-+ * Should now be included as inline
-+ *
-+ * Revision 1.1 2001/01/29 13:08:02 starvik
-+ * Initial version
-+ * This file should be included from all assembler files that needs to
-+ * initialize DRAM/SDRAM.
-+ *
-+ */
-+
-+/* Just to be certain the config file is included, we include it here
-+ * explicitely instead of depending on it being included in the file that
-+ * uses this code.
-+ */
-+
-+
-+ ;; WARNING! The registers r8 and r9 are used as parameters carrying
-+ ;; information from the decompressor (if the kernel was compressed).
-+ ;; They should not be used in the code below.
-+
-+#ifndef CONFIG_SVINTO_SIM
-+ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
-+ move.d $r0, [R_WAITSTATES]
-+
-+ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
-+ move.d $r0, [R_BUS_CONFIG]
-+
-+#ifndef CONFIG_ETRAX_SDRAM
-+ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
-+ move.d $r0, [R_DRAM_CONFIG]
-+
-+ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
-+ move.d $r0, [R_DRAM_TIMING]
-+#else
-+ ;; Samsung SDRAMs seem to require to be initialized twice to work properly.
-+ moveq 2, $r6
-+_sdram_init:
-+
-+ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
-+
-+ ; Bank configuration
-+ move.d 0x09603737, $r0
-+ move.d $r0, [R_SDRAM_CONFIG]
-+
-+ ; Calculate value of mrs_data
-+ ; CAS latency = 2 && bus_width = 32 => 0x40
-+ ; CAS latency = 3 && bus_width = 32 => 0x60
-+ ; CAS latency = 2 && bus_width = 16 => 0x20
-+ ; CAS latency = 3 && bus_width = 16 => 0x30
-+
-+ ; Check if value is already supplied in kernel config
-+ move.d 0x80008002, $r2
-+ and.d 0x00ff0000, $r2
-+ bne _set_timing
-+ lsrq 16, $r2
-+
-+ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2
-+ move.d 0x80008002, $r1
-+ move.d $r1, $r3
-+ and.d 0x03, $r1 ; Get CAS latency
-+ and.d 0x1000, $r3 ; 50 or 100 MHz?
-+ beq _speed_50
-+ nop
-+_speed_100:
-+ cmp.d 0x00, $r1 ; CAS latency = 2?
-+ beq _bw_check
-+ nop
-+ or.d 0x20, $r2 ; CAS latency = 3
-+ ba _bw_check
-+ nop
-+_speed_50:
-+ cmp.d 0x01, $r1 ; CAS latency = 2?
-+ beq _bw_check
-+ nop
-+ or.d 0x20, $r2 ; CAS latency = 3
-+_bw_check:
-+ move.d 0x09603737, $r1
-+ and.d 0x800000, $r1 ; DRAM width is bit 23
-+ bne _set_timing
-+ nop
-+ lsrq 1, $r2 ; 16 bits. Shift down value.
-+
-+ ; Set timing parameters. Starts master clock
-+_set_timing:
-+ move.d 0x80008002, $r1
-+ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0
-+ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set
-+ move.d $r1, $r5
-+ or.d 0x0000c000, $r1 ; ref = disable
-+ lslq 16, $r2 ; mrs data starts at bit 16
-+ or.d $r2, $r1
-+ move.d $r1, [R_SDRAM_TIMING]
-+
-+ ; Wait 200us
-+ move.d 10000, $r2
-+1: bne 1b
-+ subq 1, $r2
-+
-+ ; Issue initialization command sequence
-+ move.d _sdram_commands_start, $r2
-+ and.d 0x000fffff, $r2 ; Make sure commands are read from flash
-+ move.d _sdram_commands_end, $r3
-+ and.d 0x000fffff, $r3
-+1: clear.d $r4
-+ move.b [$r2+], $r4
-+ lslq 9, $r4 ; Command starts at bit 9
-+ or.d $r1, $r4
-+ move.d $r4, [R_SDRAM_TIMING]
-+ nop ; Wait five nop cycles between each command
-+ nop
-+ nop
-+ nop
-+ nop
-+ cmp.d $r2, $r3
-+ bne 1b
-+ nop
-+ move.d $r5, [R_SDRAM_TIMING]
-+ subq 1, $r6
-+ bne _sdram_init
-+ nop
-+ ba _sdram_commands_end
-+ nop
-+
-+_sdram_commands_start:
-+ .byte 3 ; Precharge
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 1 ; mrs
-+ .byte 0 ; nop
-+_sdram_commands_end:
-+#endif
-+#endif
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S 2007-05-28 20:03:13.000000000 +0200
-@@ -0,0 +1,207 @@
-+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
-+ *
-+ * DRAM/SDRAM initialization - alter with care
-+ * This file is intended to be included from other assembler files
-+ *
-+ * Note: This file may not modify r9 because r9 is used to carry
-+ * information from the decompresser to the kernel
-+ *
-+ * Copyright (C) 2000, 2001 Axis Communications AB
-+ *
-+ * Authors: Mikael Starvik (starvik@axis.com)
-+ *
-+ * $Log: dram_init.S,v $
-+ * Revision 1.5 2006/10/13 12:43:11 starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.4 2003/09/22 09:21:59 starvik
-+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
-+ * so we need to mask off 12 bits.
-+ *
-+ * Revision 1.3 2003/03/31 09:38:37 starvik
-+ * Corrected calculation of end of sdram init commands
-+ *
-+ * Revision 1.2 2002/11/19 13:33:29 starvik
-+ * Changes from Linux 2.4
-+ *
-+ * Revision 1.13 2002/10/30 07:42:28 starvik
-+ * Always read SDRAM command sequence from flash
-+ *
-+ * Revision 1.12 2002/08/09 11:37:37 orjanf
-+ * Added double initialization work-around for Samsung SDRAMs.
-+ *
-+ * Revision 1.11 2002/06/04 11:43:21 starvik
-+ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
-+ *
-+ * Revision 1.10 2001/10/04 12:00:21 martinnn
-+ * Added missing underscores.
-+ *
-+ * Revision 1.9 2001/10/01 14:47:35 bjornw
-+ * Added register prefixes and removed underscores
-+ *
-+ * Revision 1.8 2001/05/15 07:12:45 hp
-+ * Copy warning from head.S about r8 and r9
-+ *
-+ * Revision 1.7 2001/04/18 12:05:39 bjornw
-+ * Fixed comments, and explicitely include config.h to be sure its there
-+ *
-+ * Revision 1.6 2001/04/10 06:20:16 starvik
-+ * Delay should be 200us, not 200ns
-+ *
-+ * Revision 1.5 2001/04/09 06:01:13 starvik
-+ * Added support for 100 MHz SDRAMs
-+ *
-+ * Revision 1.4 2001/03/26 14:24:01 bjornw
-+ * Namechange of some config options
-+ *
-+ * Revision 1.3 2001/03/23 08:29:41 starvik
-+ * Corrected calculation of mrs_data
-+ *
-+ * Revision 1.2 2001/02/08 15:20:00 starvik
-+ * Corrected SDRAM initialization
-+ * Should now be included as inline
-+ *
-+ * Revision 1.1 2001/01/29 13:08:02 starvik
-+ * Initial version
-+ * This file should be included from all assembler files that needs to
-+ * initialize DRAM/SDRAM.
-+ *
-+ */
-+
-+/* Just to be certain the config file is included, we include it here
-+ * explicitely instead of depending on it being included in the file that
-+ * uses this code.
-+ */
-+
-+
-+ ;; WARNING! The registers r8 and r9 are used as parameters carrying
-+ ;; information from the decompressor (if the kernel was compressed).
-+ ;; They should not be used in the code below.
-+
-+#ifndef CONFIG_SVINTO_SIM
-+ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
-+ move.d $r0, [R_WAITSTATES]
-+
-+ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
-+ move.d $r0, [R_BUS_CONFIG]
-+
-+#ifndef CONFIG_ETRAX_SDRAM
-+ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
-+ move.d $r0, [R_DRAM_CONFIG]
-+
-+ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
-+ move.d $r0, [R_DRAM_TIMING]
-+#else
-+ ;; Samsung SDRAMs seem to require to be initialized twice to work properly.
-+ moveq 2, $r6
-+_sdram_init:
-+
-+ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
-+
-+ ; Bank configuration
-+ move.d 0x09603636, $r0
-+ move.d $r0, [R_SDRAM_CONFIG]
-+
-+ ; Calculate value of mrs_data
-+ ; CAS latency = 2 && bus_width = 32 => 0x40
-+ ; CAS latency = 3 && bus_width = 32 => 0x60
-+ ; CAS latency = 2 && bus_width = 16 => 0x20
-+ ; CAS latency = 3 && bus_width = 16 => 0x30
-+
-+ ; Check if value is already supplied in kernel config
-+ move.d 0x80608002, $r2
-+ and.d 0x00ff0000, $r2
-+ bne _set_timing
-+ lsrq 16, $r2
-+
-+ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2
-+ move.d 0x80608002, $r1
-+ move.d $r1, $r3
-+ and.d 0x03, $r1 ; Get CAS latency
-+ and.d 0x1000, $r3 ; 50 or 100 MHz?
-+ beq _speed_50
-+ nop
-+_speed_100:
-+ cmp.d 0x00, $r1 ; CAS latency = 2?
-+ beq _bw_check
-+ nop
-+ or.d 0x20, $r2 ; CAS latency = 3
-+ ba _bw_check
-+ nop
-+_speed_50:
-+ cmp.d 0x01, $r1 ; CAS latency = 2?
-+ beq _bw_check
-+ nop
-+ or.d 0x20, $r2 ; CAS latency = 3
-+_bw_check:
-+ move.d 0x09603636, $r1
-+ and.d 0x800000, $r1 ; DRAM width is bit 23
-+ bne _set_timing
-+ nop
-+ lsrq 1, $r2 ; 16 bits. Shift down value.
-+
-+ ; Set timing parameters. Starts master clock
-+_set_timing:
-+ move.d 0x80608002, $r1
-+ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0
-+ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set
-+ move.d $r1, $r5
-+ or.d 0x0000c000, $r1 ; ref = disable
-+ lslq 16, $r2 ; mrs data starts at bit 16
-+ or.d $r2, $r1
-+ move.d $r1, [R_SDRAM_TIMING]
-+
-+ ; Wait 200us
-+ move.d 10000, $r2
-+1: bne 1b
-+ subq 1, $r2
-+
-+ ; Issue initialization command sequence
-+ move.d _sdram_commands_start, $r2
-+ and.d 0x000fffff, $r2 ; Make sure commands are read from flash
-+ move.d _sdram_commands_end, $r3
-+ and.d 0x000fffff, $r3
-+1: clear.d $r4
-+ move.b [$r2+], $r4
-+ lslq 9, $r4 ; Command starts at bit 9
-+ or.d $r1, $r4
-+ move.d $r4, [R_SDRAM_TIMING]
-+ nop ; Wait five nop cycles between each command
-+ nop
-+ nop
-+ nop
-+ nop
-+ cmp.d $r2, $r3
-+ bne 1b
-+ nop
-+ move.d $r5, [R_SDRAM_TIMING]
-+ subq 1, $r6
-+ bne _sdram_init
-+ nop
-+ ba _sdram_commands_end
-+ nop
-+
-+_sdram_commands_start:
-+ .byte 3 ; Precharge
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 2 ; refresh
-+ .byte 0 ; nop
-+ .byte 1 ; mrs
-+ .byte 0 ; nop
-+_sdram_commands_end:
-+#endif
-+#endif
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_416.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_416.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_416.S 2007-05-28 17:16:28.000000000 +0200
-@@ -0,0 +1,126 @@
-+/*
-+ * arch/cris/boot/compressed/head.S
-+ *
-+ * Copyright (C) 1999, 2001 Axis Communications AB
-+ *
-+ * Code that sets up the DRAM registers, calls the
-+ * decompressor to unpack the piggybacked kernel, and jumps.
-+ *
-+ */
-+
-+#define ASSEMBLER_MACROS_ONLY
-+#include <asm/arch/sv_addr_ag.h>
-+
-+#define RAM_INIT_MAGIC 0x56902387
-+#define COMMAND_LINE_MAGIC 0x87109563
-+
-+ ;; Exported symbols
-+
-+ .globl _input_data
-+
-+
-+ .text
-+
-+ nop
-+ di
-+
-+;; We need to initialze DRAM registers before we start using the DRAM
-+
-+ cmp.d RAM_INIT_MAGIC, r8 ; Already initialized?
-+ beq dram_init_finished
-+ nop
-+
-+#include "dram_init_416.S"
-+
-+dram_init_finished:
-+
-+ ;; Initiate the PA and PB ports
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
-+ move.b r0, [R_PORT_PA_DATA]
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
-+ move.b r0, [R_PORT_PA_DIR]
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
-+ move.b r0, [R_PORT_PB_DATA]
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
-+ move.b r0, [R_PORT_PB_DIR]
-+
-+ ;; Setup the stack to a suitably high address.
-+ ;; We assume 8 MB is the minimum DRAM in an eLinux
-+ ;; product and put the sp at the top for now.
-+
-+ move.d 0x40800000, sp
-+
-+ ;; Figure out where the compressed piggyback image is
-+ ;; in the flash (since we wont try to copy it to DRAM
-+ ;; before unpacking). It is at _edata, but in flash.
-+ ;; Use (_edata - basse) as offset to the current PC.
-+
-+basse: move.d pc, r5
-+ and.d 0x7fffffff, r5 ; strip any non-cache bit
-+ subq 2, r5 ; compensate for the move.d pc instr
-+ move.d r5, r0 ; save for later - flash address of 'basse'
-+ add.d _edata, r5
-+ sub.d basse, r5 ; r5 = flash address of '_edata'
-+
-+ ;; Copy text+data to DRAM
-+
-+ move.d basse, r1 ; destination
-+ move.d _edata, r2 ; end destination
-+1: move.w [r0+], r3
-+ move.w r3, [r1+]
-+ cmp.d r2, r1
-+ bcs 1b
-+ nop
-+
-+ move.d r5, [_input_data] ; for the decompressor
-+
-+
-+ ;; Clear the decompressors BSS (between _edata and _end)
-+
-+ moveq 0, r0
-+ move.d _edata, r1
-+ move.d _end, r2
-+1: move.w r0, [r1+]
-+ cmp.d r2, r1
-+ bcs 1b
-+ nop
-+
-+ ;; Save command line magic and address.
-+ move.d _cmd_line_magic, $r12
-+ move.d $r10, [$r12]
-+ move.d _cmd_line_addr, $r12
-+ move.d $r11, [$r12]
-+
-+ ;; Do the decompression and save compressed size in _inptr
-+
-+ jsr _decompress_kernel
-+
-+ ;; Put start address of root partition in r9 so the kernel can use it
-+ ;; when mounting from flash
-+
-+ move.d [_input_data], r9 ; flash address of compressed kernel
-+ add.d [_inptr], r9 ; size of compressed kernel
-+
-+ ;; Restore command line magic and address.
-+ move.d _cmd_line_magic, $r10
-+ move.d [$r10], $r10
-+ move.d _cmd_line_addr, $r11
-+ move.d [$r11], $r11
-+
-+ ;; Enter the decompressed kernel
-+ move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized
-+ jump 0x40004000 ; kernel is linked to this address
-+
-+ .data
-+
-+_input_data:
-+ .dword 0 ; used by the decompressor
-+_cmd_line_magic:
-+ .dword 0
-+_cmd_line_addr:
-+ .dword 0
-+#include "hw_settings_416.S"
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_816.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_816.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_816.S 2007-05-28 17:16:58.000000000 +0200
-@@ -0,0 +1,126 @@
-+/*
-+ * arch/cris/boot/compressed/head.S
-+ *
-+ * Copyright (C) 1999, 2001 Axis Communications AB
-+ *
-+ * Code that sets up the DRAM registers, calls the
-+ * decompressor to unpack the piggybacked kernel, and jumps.
-+ *
-+ */
-+
-+#define ASSEMBLER_MACROS_ONLY
-+#include <asm/arch/sv_addr_ag.h>
-+
-+#define RAM_INIT_MAGIC 0x56902387
-+#define COMMAND_LINE_MAGIC 0x87109563
-+
-+ ;; Exported symbols
-+
-+ .globl _input_data
-+
-+
-+ .text
-+
-+ nop
-+ di
-+
-+;; We need to initialze DRAM registers before we start using the DRAM
-+
-+ cmp.d RAM_INIT_MAGIC, r8 ; Already initialized?
-+ beq dram_init_finished
-+ nop
-+
-+#include "dram_init_816.S"
-+
-+dram_init_finished:
-+
-+ ;; Initiate the PA and PB ports
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
-+ move.b r0, [R_PORT_PA_DATA]
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
-+ move.b r0, [R_PORT_PA_DIR]
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
-+ move.b r0, [R_PORT_PB_DATA]
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
-+ move.b r0, [R_PORT_PB_DIR]
-+
-+ ;; Setup the stack to a suitably high address.
-+ ;; We assume 8 MB is the minimum DRAM in an eLinux
-+ ;; product and put the sp at the top for now.
-+
-+ move.d 0x40800000, sp
-+
-+ ;; Figure out where the compressed piggyback image is
-+ ;; in the flash (since we wont try to copy it to DRAM
-+ ;; before unpacking). It is at _edata, but in flash.
-+ ;; Use (_edata - basse) as offset to the current PC.
-+
-+basse: move.d pc, r5
-+ and.d 0x7fffffff, r5 ; strip any non-cache bit
-+ subq 2, r5 ; compensate for the move.d pc instr
-+ move.d r5, r0 ; save for later - flash address of 'basse'
-+ add.d _edata, r5
-+ sub.d basse, r5 ; r5 = flash address of '_edata'
-+
-+ ;; Copy text+data to DRAM
-+
-+ move.d basse, r1 ; destination
-+ move.d _edata, r2 ; end destination
-+1: move.w [r0+], r3
-+ move.w r3, [r1+]
-+ cmp.d r2, r1
-+ bcs 1b
-+ nop
-+
-+ move.d r5, [_input_data] ; for the decompressor
-+
-+
-+ ;; Clear the decompressors BSS (between _edata and _end)
-+
-+ moveq 0, r0
-+ move.d _edata, r1
-+ move.d _end, r2
-+1: move.w r0, [r1+]
-+ cmp.d r2, r1
-+ bcs 1b
-+ nop
-+
-+ ;; Save command line magic and address.
-+ move.d _cmd_line_magic, $r12
-+ move.d $r10, [$r12]
-+ move.d _cmd_line_addr, $r12
-+ move.d $r11, [$r12]
-+
-+ ;; Do the decompression and save compressed size in _inptr
-+
-+ jsr _decompress_kernel
-+
-+ ;; Put start address of root partition in r9 so the kernel can use it
-+ ;; when mounting from flash
-+
-+ move.d [_input_data], r9 ; flash address of compressed kernel
-+ add.d [_inptr], r9 ; size of compressed kernel
-+
-+ ;; Restore command line magic and address.
-+ move.d _cmd_line_magic, $r10
-+ move.d [$r10], $r10
-+ move.d _cmd_line_addr, $r11
-+ move.d [$r11], $r11
-+
-+ ;; Enter the decompressed kernel
-+ move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized
-+ jump 0x40004000 ; kernel is linked to this address
-+
-+ .data
-+
-+_input_data:
-+ .dword 0 ; used by the decompressor
-+_cmd_line_magic:
-+ .dword 0
-+_cmd_line_addr:
-+ .dword 0
-+#include "hw_settings_816.S"
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_832.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_832.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_832.S 2007-05-28 17:17:12.000000000 +0200
-@@ -0,0 +1,126 @@
-+/*
-+ * arch/cris/boot/compressed/head.S
-+ *
-+ * Copyright (C) 1999, 2001 Axis Communications AB
-+ *
-+ * Code that sets up the DRAM registers, calls the
-+ * decompressor to unpack the piggybacked kernel, and jumps.
-+ *
-+ */
-+
-+#define ASSEMBLER_MACROS_ONLY
-+#include <asm/arch/sv_addr_ag.h>
-+
-+#define RAM_INIT_MAGIC 0x56902387
-+#define COMMAND_LINE_MAGIC 0x87109563
-+
-+ ;; Exported symbols
-+
-+ .globl _input_data
-+
-+
-+ .text
-+
-+ nop
-+ di
-+
-+;; We need to initialze DRAM registers before we start using the DRAM
-+
-+ cmp.d RAM_INIT_MAGIC, r8 ; Already initialized?
-+ beq dram_init_finished
-+ nop
-+
-+#include "dram_init_832.S"
-+
-+dram_init_finished:
-+
-+ ;; Initiate the PA and PB ports
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
-+ move.b r0, [R_PORT_PA_DATA]
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
-+ move.b r0, [R_PORT_PA_DIR]
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
-+ move.b r0, [R_PORT_PB_DATA]
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
-+ move.b r0, [R_PORT_PB_DIR]
-+
-+ ;; Setup the stack to a suitably high address.
-+ ;; We assume 8 MB is the minimum DRAM in an eLinux
-+ ;; product and put the sp at the top for now.
-+
-+ move.d 0x40800000, sp
-+
-+ ;; Figure out where the compressed piggyback image is
-+ ;; in the flash (since we wont try to copy it to DRAM
-+ ;; before unpacking). It is at _edata, but in flash.
-+ ;; Use (_edata - basse) as offset to the current PC.
-+
-+basse: move.d pc, r5
-+ and.d 0x7fffffff, r5 ; strip any non-cache bit
-+ subq 2, r5 ; compensate for the move.d pc instr
-+ move.d r5, r0 ; save for later - flash address of 'basse'
-+ add.d _edata, r5
-+ sub.d basse, r5 ; r5 = flash address of '_edata'
-+
-+ ;; Copy text+data to DRAM
-+
-+ move.d basse, r1 ; destination
-+ move.d _edata, r2 ; end destination
-+1: move.w [r0+], r3
-+ move.w r3, [r1+]
-+ cmp.d r2, r1
-+ bcs 1b
-+ nop
-+
-+ move.d r5, [_input_data] ; for the decompressor
-+
-+
-+ ;; Clear the decompressors BSS (between _edata and _end)
-+
-+ moveq 0, r0
-+ move.d _edata, r1
-+ move.d _end, r2
-+1: move.w r0, [r1+]
-+ cmp.d r2, r1
-+ bcs 1b
-+ nop
-+
-+ ;; Save command line magic and address.
-+ move.d _cmd_line_magic, $r12
-+ move.d $r10, [$r12]
-+ move.d _cmd_line_addr, $r12
-+ move.d $r11, [$r12]
-+
-+ ;; Do the decompression and save compressed size in _inptr
-+
-+ jsr _decompress_kernel
-+
-+ ;; Put start address of root partition in r9 so the kernel can use it
-+ ;; when mounting from flash
-+
-+ move.d [_input_data], r9 ; flash address of compressed kernel
-+ add.d [_inptr], r9 ; size of compressed kernel
-+
-+ ;; Restore command line magic and address.
-+ move.d _cmd_line_magic, $r10
-+ move.d [$r10], $r10
-+ move.d _cmd_line_addr, $r11
-+ move.d [$r11], $r11
-+
-+ ;; Enter the decompressed kernel
-+ move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized
-+ jump 0x40004000 ; kernel is linked to this address
-+
-+ .data
-+
-+_input_data:
-+ .dword 0 ; used by the decompressor
-+_cmd_line_magic:
-+ .dword 0
-+_cmd_line_addr:
-+ .dword 0
-+#include "hw_settings_832.S"
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_MCM.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_MCM.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_MCM.S 2007-05-28 17:17:51.000000000 +0200
-@@ -0,0 +1,126 @@
-+/*
-+ * arch/cris/boot/compressed/head.S
-+ *
-+ * Copyright (C) 1999, 2001 Axis Communications AB
-+ *
-+ * Code that sets up the DRAM registers, calls the
-+ * decompressor to unpack the piggybacked kernel, and jumps.
-+ *
-+ */
-+
-+#define ASSEMBLER_MACROS_ONLY
-+#include <asm/arch/sv_addr_ag.h>
-+
-+#define RAM_INIT_MAGIC 0x56902387
-+#define COMMAND_LINE_MAGIC 0x87109563
-+
-+ ;; Exported symbols
-+
-+ .globl _input_data
-+
-+
-+ .text
-+
-+ nop
-+ di
-+
-+;; We need to initialze DRAM registers before we start using the DRAM
-+
-+ cmp.d RAM_INIT_MAGIC, r8 ; Already initialized?
-+ beq dram_init_finished
-+ nop
-+
-+#include "dram_init_MCM.S"
-+
-+dram_init_finished:
-+
-+ ;; Initiate the PA and PB ports
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
-+ move.b r0, [R_PORT_PA_DATA]
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
-+ move.b r0, [R_PORT_PA_DIR]
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
-+ move.b r0, [R_PORT_PB_DATA]
-+
-+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
-+ move.b r0, [R_PORT_PB_DIR]
-+
-+ ;; Setup the stack to a suitably high address.
-+ ;; We assume 8 MB is the minimum DRAM in an eLinux
-+ ;; product and put the sp at the top for now.
-+
-+ move.d 0x40800000, sp
-+
-+ ;; Figure out where the compressed piggyback image is
-+ ;; in the flash (since we wont try to copy it to DRAM
-+ ;; before unpacking). It is at _edata, but in flash.
-+ ;; Use (_edata - basse) as offset to the current PC.
-+
-+basse: move.d pc, r5
-+ and.d 0x7fffffff, r5 ; strip any non-cache bit
-+ subq 2, r5 ; compensate for the move.d pc instr
-+ move.d r5, r0 ; save for later - flash address of 'basse'
-+ add.d _edata, r5
-+ sub.d basse, r5 ; r5 = flash address of '_edata'
-+
-+ ;; Copy text+data to DRAM
-+
-+ move.d basse, r1 ; destination
-+ move.d _edata, r2 ; end destination
-+1: move.w [r0+], r3
-+ move.w r3, [r1+]
-+ cmp.d r2, r1
-+ bcs 1b
-+ nop
-+
-+ move.d r5, [_input_data] ; for the decompressor
-+
-+
-+ ;; Clear the decompressors BSS (between _edata and _end)
-+
-+ moveq 0, r0
-+ move.d _edata, r1
-+ move.d _end, r2
-+1: move.w r0, [r1+]
-+ cmp.d r2, r1
-+ bcs 1b
-+ nop
-+
-+ ;; Save command line magic and address.
-+ move.d _cmd_line_magic, $r12
-+ move.d $r10, [$r12]
-+ move.d _cmd_line_addr, $r12
-+ move.d $r11, [$r12]
-+
-+ ;; Do the decompression and save compressed size in _inptr
-+
-+ jsr _decompress_kernel
-+
-+ ;; Put start address of root partition in r9 so the kernel can use it
-+ ;; when mounting from flash
-+
-+ move.d [_input_data], r9 ; flash address of compressed kernel
-+ add.d [_inptr], r9 ; size of compressed kernel
-+
-+ ;; Restore command line magic and address.
-+ move.d _cmd_line_magic, $r10
-+ move.d [$r10], $r10
-+ move.d _cmd_line_addr, $r11
-+ move.d [$r11], $r11
-+
-+ ;; Enter the decompressed kernel
-+ move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized
-+ jump 0x40004000 ; kernel is linked to this address
-+
-+ .data
-+
-+_input_data:
-+ .dword 0 ; used by the decompressor
-+_cmd_line_magic:
-+ .dword 0
-+_cmd_line_addr:
-+ .dword 0
-+#include "hw_settings_MCM.S"
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S 2007-05-28 17:14:14.000000000 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-+ *
-+ * This table is used by some tools to extract hardware parameters.
-+ * The table should be included in the kernel and the decompressor.
-+ * Don't forget to update the tools if you change this table.
-+ *
-+ * Copyright (C) 2001 Axis Communications AB
-+ *
-+ * Authors: Mikael Starvik (starvik@axis.com)
-+ */
-+
-+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
-+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
-+
-+ .ascii "HW_PARAM_MAGIC" ; Magic number
-+ .dword 0xc0004000 ; Kernel start address
-+
-+ ; Debug port
-+#ifdef CONFIG_ETRAX_DEBUG_PORT0
-+ .dword 0
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
-+ .dword 1
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
-+ .dword 2
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
-+ .dword 3
-+#else
-+ .dword 4 ; No debug
-+#endif
-+
-+ ; SDRAM or EDO DRAM?
-+#ifdef CONFIG_ETRAX_SDRAM
-+ .dword 1
-+#else
-+ .dword 0
-+#endif
-+
-+ ; Register values
-+ .dword R_WAITSTATES
-+ .dword CONFIG_ETRAX_DEF_R_WAITSTATES
-+ .dword R_BUS_CONFIG
-+ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
-+#ifdef CONFIG_ETRAX_SDRAM
-+ .dword R_SDRAM_CONFIG
-+ .dword CONFIG_ETRAX_DEF_R_SDRAM_CONFIG
-+ .dword R_SDRAM_TIMING
-+ .dword CONFIG_ETRAX_DEF_R_SDRAM_TIMING
-+#else
-+ .dword R_DRAM_CONFIG
-+ .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
-+ .dword R_DRAM_TIMING
-+ .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
-+#endif
-+ .dword R_PORT_PA_SET
-+ .dword PA_SET_VALUE
-+ .dword R_PORT_PB_SET
-+ .dword PB_SET_VALUE
-+ .dword 0 ; No more register values
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_416.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S 2007-05-28 20:12:02.000000000 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-+ *
-+ * This table is used by some tools to extract hardware parameters.
-+ * The table should be included in the kernel and the decompressor.
-+ * Don't forget to update the tools if you change this table.
-+ *
-+ * Copyright (C) 2001 Axis Communications AB
-+ *
-+ * Authors: Mikael Starvik (starvik@axis.com)
-+ */
-+
-+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
-+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
-+
-+ .ascii "HW_PARAM_MAGIC" ; Magic number
-+ .dword 0xc0004000 ; Kernel start address
-+
-+ ; Debug port
-+#ifdef CONFIG_ETRAX_DEBUG_PORT0
-+ .dword 0
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
-+ .dword 1
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
-+ .dword 2
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
-+ .dword 3
-+#else
-+ .dword 4 ; No debug
-+#endif
-+
-+ ; SDRAM or EDO DRAM?
-+#ifdef CONFIG_ETRAX_SDRAM
-+ .dword 1
-+#else
-+ .dword 0
-+#endif
-+
-+ ; Register values
-+ .dword R_WAITSTATES
-+ .dword CONFIG_ETRAX_DEF_R_WAITSTATES
-+ .dword R_BUS_CONFIG
-+ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
-+#ifdef CONFIG_ETRAX_SDRAM
-+ .dword R_SDRAM_CONFIG
-+ .dword 0x09603636
-+ .dword R_SDRAM_TIMING
-+ .dword 0x80008002
-+#else
-+ .dword R_DRAM_CONFIG
-+ .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
-+ .dword R_DRAM_TIMING
-+ .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
-+#endif
-+ .dword R_PORT_PA_SET
-+ .dword PA_SET_VALUE
-+ .dword R_PORT_PB_SET
-+ .dword PB_SET_VALUE
-+ .dword 0 ; No more register values
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_816.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S 2007-05-28 20:12:29.000000000 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-+ *
-+ * This table is used by some tools to extract hardware parameters.
-+ * The table should be included in the kernel and the decompressor.
-+ * Don't forget to update the tools if you change this table.
-+ *
-+ * Copyright (C) 2001 Axis Communications AB
-+ *
-+ * Authors: Mikael Starvik (starvik@axis.com)
-+ */
-+
-+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
-+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
-+
-+ .ascii "HW_PARAM_MAGIC" ; Magic number
-+ .dword 0xc0004000 ; Kernel start address
-+
-+ ; Debug port
-+#ifdef CONFIG_ETRAX_DEBUG_PORT0
-+ .dword 0
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
-+ .dword 1
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
-+ .dword 2
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
-+ .dword 3
-+#else
-+ .dword 4 ; No debug
-+#endif
-+
-+ ; SDRAM or EDO DRAM?
-+#ifdef CONFIG_ETRAX_SDRAM
-+ .dword 1
-+#else
-+ .dword 0
-+#endif
-+
-+ ; Register values
-+ .dword R_WAITSTATES
-+ .dword CONFIG_ETRAX_DEF_R_WAITSTATES
-+ .dword R_BUS_CONFIG
-+ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
-+#ifdef CONFIG_ETRAX_SDRAM
-+ .dword R_SDRAM_CONFIG
-+ .dword 0x09603636
-+ .dword R_SDRAM_TIMING
-+ .dword 0x80008002
-+#else
-+ .dword R_DRAM_CONFIG
-+ .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
-+ .dword R_DRAM_TIMING
-+ .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
-+#endif
-+ .dword R_PORT_PA_SET
-+ .dword PA_SET_VALUE
-+ .dword R_PORT_PB_SET
-+ .dword PB_SET_VALUE
-+ .dword 0 ; No more register values
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_832.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S 2007-05-28 20:12:55.000000000 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-+ *
-+ * This table is used by some tools to extract hardware parameters.
-+ * The table should be included in the kernel and the decompressor.
-+ * Don't forget to update the tools if you change this table.
-+ *
-+ * Copyright (C) 2001 Axis Communications AB
-+ *
-+ * Authors: Mikael Starvik (starvik@axis.com)
-+ */
-+
-+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
-+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
-+
-+ .ascii "HW_PARAM_MAGIC" ; Magic number
-+ .dword 0xc0004000 ; Kernel start address
-+
-+ ; Debug port
-+#ifdef CONFIG_ETRAX_DEBUG_PORT0
-+ .dword 0
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
-+ .dword 1
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
-+ .dword 2
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
-+ .dword 3
-+#else
-+ .dword 4 ; No debug
-+#endif
-+
-+ ; SDRAM or EDO DRAM?
-+#ifdef CONFIG_ETRAX_SDRAM
-+ .dword 1
-+#else
-+ .dword 0
-+#endif
-+
-+ ; Register values
-+ .dword R_WAITSTATES
-+ .dword CONFIG_ETRAX_DEF_R_WAITSTATES
-+ .dword R_BUS_CONFIG
-+ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
-+#ifdef CONFIG_ETRAX_SDRAM
-+ .dword R_SDRAM_CONFIG
-+ .dword CONFIG_ETRAX_DEF_R_SDRAM_CONFIG
-+ .dword R_SDRAM_TIMING
-+ .dword CONFIG_ETRAX_DEF_R_SDRAM_TIMING
-+#else
-+ .dword R_DRAM_CONFIG
-+ .dword 0x09603737
-+ .dword R_DRAM_TIMING
-+ .dword 0x80008002
-+#endif
-+ .dword R_PORT_PA_SET
-+ .dword PA_SET_VALUE
-+ .dword R_PORT_PB_SET
-+ .dword PB_SET_VALUE
-+ .dword 0 ; No more register values
-diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S
---- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S 2007-05-28 20:11:31.000000000 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-+ *
-+ * This table is used by some tools to extract hardware parameters.
-+ * The table should be included in the kernel and the decompressor.
-+ * Don't forget to update the tools if you change this table.
-+ *
-+ * Copyright (C) 2001 Axis Communications AB
-+ *
-+ * Authors: Mikael Starvik (starvik@axis.com)
-+ */
-+
-+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
-+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
-+ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
-+
-+ .ascii "HW_PARAM_MAGIC" ; Magic number
-+ .dword 0xc0004000 ; Kernel start address
-+
-+ ; Debug port
-+#ifdef CONFIG_ETRAX_DEBUG_PORT0
-+ .dword 0
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
-+ .dword 1
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
-+ .dword 2
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
-+ .dword 3
-+#else
-+ .dword 4 ; No debug
-+#endif
-+
-+ ; SDRAM or EDO DRAM?
-+#ifdef CONFIG_ETRAX_SDRAM
-+ .dword 1
-+#else
-+ .dword 0
-+#endif
-+
-+ ; Register values
-+ .dword R_WAITSTATES
-+ .dword CONFIG_ETRAX_DEF_R_WAITSTATES
-+ .dword R_BUS_CONFIG
-+ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
-+#ifdef CONFIG_ETRAX_SDRAM
-+ .dword R_SDRAM_CONFIG
-+ .dword 0x09603636
-+ .dword R_SDRAM_TIMING
-+ .dword 0x80608002
-+#else
-+ .dword R_DRAM_CONFIG
-+ .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
-+ .dword R_DRAM_TIMING
-+ .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
-+#endif
-+ .dword R_PORT_PA_SET
-+ .dword PA_SET_VALUE
-+ .dword R_PORT_PB_SET
-+ .dword PB_SET_VALUE
-+ .dword 0 ; No more register values
generated by cgit v1.1 at 2024-07-09 16:20:46 +0000