diff options
Diffstat (limited to 'target/linux/lantiq/base-files/etc/uci-defaults')
3 files changed, 0 insertions, 238 deletions
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds b/target/linux/lantiq/base-files/etc/uci-defaults/01_leds deleted file mode 100644 index 2b3293b..0000000 --- a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds +++ /dev/null @@ -1,39 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2011 OpenWrt.org -# based on ar71xx -# - -. /lib/functions/uci-defaults.sh -. /lib/functions/lantiq.sh - -[ -e "/sys/class/leds/wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "wifi" "phy0tpt" -[ -e "/sys/class/leds/usb" ] && ucidef_set_led_usbdev "usb" "usb" "usb" "1-1" -[ -e "/sys/class/leds/usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "usb2" "2-1" -[ -e "/sys/class/leds/internet" ] && ucidef_set_led_netdev "internet" "internet" "internet" "pppoe-wan" - -for a in `ls /sys/class/leds/`; do - grep -q "\[none\]" /sys/class/leds/$a/trigger - [ $? -eq 0 ] && ucidef_set_led_default $a $a $a `cat /sys/class/leds/$a/brightness` -done - -board=$(lantiq_board_name) - -case "$board" in -VG3503J) - ucidef_set_led_netdev "vdsl" "vdsl" "bt:green:dsl" "ptm0" - ;; -BTHOMEHUBV2B) - ucidef_set_led_default "power" "power" "soc:blue:power" "1" -# ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0radio" - ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt" - ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "nas0" - ucidef_set_led_usbdev "usb" "usb" "soc:blue:phone" "1-1" - ;; -*) - ;; -esac - -ucidef_commit_leds - -exit 0 diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network deleted file mode 100644 index 2dee0c1..0000000 --- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network +++ /dev/null @@ -1,183 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2011-2012 OpenWrt.org -# - -[ -e /etc/config/network ] && exit 0 - -set_atm_wan() { - local vpi=$1 - local vci=$2 - local encaps=$3 - local payload=$4 - uci batch <<EOF -set network.atm='atm-bridge' -set network.atm.vpi='$vpi' -set network.atm.vci='$vci' -set network.atm.encaps='$encaps' -set network.atm.payload='$payload' -set network.wan='interface' -set network.wan.ifname='nas0' -set network.wan.proto='pppoe' -set network.wan.username='foo' -set network.wan.password='bar' -set network.wan.ipv6='1' -set network.wan6='interface' -set network.wan6.ifname='@wan' -set network.wan6.proto='dhcpv6' -EOF -} - -set_adsl_modem() { - local annex=$1 - local firmware=$2 - uci batch <<EOF -set network.dsl='adsl' -set network.dsl.annex='$annex' -set network.dsl.firmware='$firmware' -EOF -} - -set_vdsl_modem() { - local annex=$1 - local firmware=$2 - local tone=$3 - local xfer_mode=$4 - uci batch <<EOF -set network.dsl='vdsl' -set network.dsl.annex='$annex' -set network.dsl.firmware='$firmware' -set network.dsl.tone='$tone' -set network.dsl.xfer_mode='$xfer_mode' -EOF -} - -. /lib/functions/uci-defaults.sh -. /lib/functions/lantiq.sh - -touch /etc/config/network - -ucidef_set_interface_loopback -ucidef_set_interface_lan 'eth0' - -vpi=1 -vci=32 -annex="a" -encaps="llc" -payload="bridged" -lan_mac="" -wan_mac="" - -board=$(lantiq_board_name) - -case "$board" in -# adm6996 -ARV4510PW) - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t" - ;; - -ARV4520PW) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t" - ;; - -ACMP252|GIGASX76X) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "4 3 2 1 5t" - ;; - -# ar8316 -ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5" - ;; - -# rtl8306g -ARV7519PW) - lan_mac=$(mtd_get_mac_binary board_config 22) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4t" - ;; - -WBMR) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5" - ;; - -VG3503J) - ucidef_set_interface_lan 'eth0' - uci set network.lan.type='none' - ;; - -DGN3500*) - lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t" - ;; - -GR7000) - ucidef_set_interface_wan "eth0" - uci set network.lan.ifname='' - ;; - -H201L) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4t" - ;; - -#rtl8306g -P2601HNFX) - ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t" - ;; - -P2812HNUFX) - ucidef_set_interface_lan 'eth0.1' - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 5 6t" - ;; - -TDW8970) - lan_mac=$(mtd_get_mac_binary boardconfig 61696) - wan_mac=$(macaddr_add "$lan_mac" 1) - ;; - -ARV7519RW22) - lan_mac=$(mtd_get_mac_binary boardconfig 22) - wan_mac=$(macaddr_add "$lan_mac" 1) - ;; - -BTHOMEHUBV2B) - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ;; -esac - -[ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload" - -if [ -n "$(grep "system type.*: VR9" /proc/cpuinfo)" ]; then - set_vdsl_modem "$annex" "/lib/firmware/vdsl.bin" "av" "ptm" -else - set_adsl_modem "$annex" "/lib/firmware/adsl.bin" -fi - -[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac -[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac - -uci commit network - -exit 0 diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/03_wireless-wps b/target/linux/lantiq/base-files/etc/uci-defaults/03_wireless-wps deleted file mode 100644 index e75fb84..0000000 --- a/target/linux/lantiq/base-files/etc/uci-defaults/03_wireless-wps +++ /dev/null @@ -1,16 +0,0 @@ -. /lib/functions.sh -. /lib/functions/lantiq.sh - -set_wps() { - uci set wireless.$1.wps_pushbutton=0 - uci set wireless.$1.wps_device_name="OpenWrt - $(lantiq_board_model)" -} - -board=$(lantiq_board_name) -case $board in -WBMR) - config_load wireless - config_foreach set_wps wifi-iface - uci commit wireless - ;; -esac |