summaryrefslogtreecommitdiff
path: root/target/linux/mediatek/patches/0047-xhci-mediatek-support-MTK-xHCI-host-controller.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mediatek/patches/0047-xhci-mediatek-support-MTK-xHCI-host-controller.patch')
-rw-r--r--target/linux/mediatek/patches/0047-xhci-mediatek-support-MTK-xHCI-host-controller.patch832
1 files changed, 832 insertions, 0 deletions
diff --git a/target/linux/mediatek/patches/0047-xhci-mediatek-support-MTK-xHCI-host-controller.patch b/target/linux/mediatek/patches/0047-xhci-mediatek-support-MTK-xHCI-host-controller.patch
new file mode 100644
index 0000000..ea3289e
--- /dev/null
+++ b/target/linux/mediatek/patches/0047-xhci-mediatek-support-MTK-xHCI-host-controller.patch
@@ -0,0 +1,832 @@
+From e604b6c864f2e3b6fe0706c4bef886533d92f67a Mon Sep 17 00:00:00 2001
+From: Chunfeng Yun <chunfeng.yun@mediatek.com>
+Date: Wed, 27 May 2015 19:48:02 +0800
+Subject: [PATCH 47/76] xhci: mediatek: support MTK xHCI host controller
+
+MTK xhci host controller defines some extra SW scheduling
+parameters for HW to minimize the scheduling effort for
+synchronous and interrupt endpoints. The parameters are
+put into reseved DWs of slot context and endpoint context.
+
+Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
+---
+ drivers/usb/host/Kconfig | 9 +
+ drivers/usb/host/Makefile | 3 +
+ drivers/usb/host/xhci-mtk.c | 470 ++++++++++++++++++++++++++++++++++++++++++
+ drivers/usb/host/xhci-mtk.h | 119 +++++++++++
+ drivers/usb/host/xhci-plat.c | 22 +-
+ drivers/usb/host/xhci-ring.c | 35 +++-
+ drivers/usb/host/xhci.c | 16 +-
+ drivers/usb/host/xhci.h | 1 +
+ 8 files changed, 667 insertions(+), 8 deletions(-)
+ create mode 100644 drivers/usb/host/xhci-mtk.c
+ create mode 100644 drivers/usb/host/xhci-mtk.h
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -41,6 +41,15 @@
+
+ If unsure, say N.
+
++config USB_XHCI_MTK
++ tristate "xHCI support for Mediatek MT65xx"
++ select USB_XHCI_PLATFORM
++ depends on ARCH_MEDIATEK || COMPILE_TEST
++ ---help---
++ Say 'Y' to enable the support for the xHCI host controller
++ found in Mediatek MT65xx SoCs.
++ If unsure, say N.
++
+ config USB_XHCI_MVEBU
+ tristate "xHCI support for Marvell Armada 375/38x"
+ select USB_XHCI_PLATFORM
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -15,6 +15,9 @@
+ xhci-hcd-y += xhci-trace.o
+
+ xhci-plat-hcd-y := xhci-plat.o
++ifneq ($(CONFIG_USB_XHCI_MTK), )
++ xhci-plat-hcd-y += xhci-mtk.o
++endif
+ ifneq ($(CONFIG_USB_XHCI_MVEBU), )
+ xhci-plat-hcd-y += xhci-mvebu.o
+ endif
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk.c
+@@ -0,0 +1,470 @@
++/*
++ * Copyright (c) 2015 MediaTek Inc.
++ * Author:
++ * Zhigang.Wei <zhigang.wei@mediatek.com>
++ * Chunfeng.Yun <chunfeng.yun@mediatek.com>
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include "xhci-mtk.h"
++
++
++#define SS_BW_BOUNDARY 51000
++/* table 5-5. High-speed Isoc Transaction Limits in usb_20 spec */
++#define HS_BW_BOUNDARY 6144
++/* usb2 spec section11.18.1: at most 188 FS bytes per microframe */
++#define FS_PAYLOAD_MAX 188
++
++/* mtk scheduler bitmasks */
++#define EP_BPKTS(p) ((p) & 0x3f)
++#define EP_BCSCOUNT(p) (((p) & 0x7) << 8)
++#define EP_BBM(p) ((p) << 11)
++#define EP_BOFFSET(p) ((p) & 0x3fff)
++#define EP_BREPEAT(p) (((p) & 0x7fff) << 16)
++
++static int is_fs_or_ls(enum usb_device_speed speed)
++{
++ return speed == USB_SPEED_FULL || speed == USB_SPEED_LOW;
++}
++
++static int get_bw_index(struct xhci_hcd *xhci, struct usb_device *udev,
++ struct usb_host_endpoint *ep)
++{
++ int bw_index;
++ int port_id;
++ struct xhci_virt_device *virt_dev;
++
++ virt_dev = xhci->devs[udev->slot_id];
++ port_id = virt_dev->real_port;
++
++ if (udev->speed == USB_SPEED_SUPER) {
++ if (usb_endpoint_dir_out(&ep->desc))
++ bw_index = (port_id - 1) * 2;
++ else
++ bw_index = (port_id - 1) * 2 + 1;
++ } else {
++ bw_index = port_id + xhci->num_usb3_ports - 1;
++ }
++
++ return bw_index;
++}
++
++
++static void setup_sch_info(struct usb_device *udev,
++ struct xhci_ep_ctx *ep_ctx, struct mu3h_sch_ep_info *sch_ep)
++{
++ u32 ep_type;
++ u32 ep_interval;
++ u32 max_packet_size;
++ u32 max_burst;
++ u32 mult;
++ u32 esit_pkts;
++
++ ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2));
++ ep_interval = CTX_TO_EP_INTERVAL(le32_to_cpu(ep_ctx->ep_info));
++ max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
++ max_burst = CTX_TO_MAX_BURST(le32_to_cpu(ep_ctx->ep_info2));
++ mult = CTX_TO_EP_MULT(le32_to_cpu(ep_ctx->ep_info));
++ pr_debug("%s: max_burst = %d, mult = %d\n", __func__, max_burst, mult);
++
++ sch_ep->ep_type = ep_type;
++ sch_ep->max_packet_size = max_packet_size;
++ sch_ep->esit = 1 << ep_interval;
++ sch_ep->offset = 0;
++ sch_ep->burst_mode = 0;
++
++ if (udev->speed == USB_SPEED_HIGH) {
++ sch_ep->cs_count = 0;
++ /*
++ * usb_20 spec section5.9
++ * a single microframe is enough for HS synchromous endpoints
++ * in a interval
++ */
++ sch_ep->num_budget_microframes = 1;
++ sch_ep->repeat = 0;
++ /*
++ * xHCI spec section6.2.3.4
++ * @max_busrt is the number of additional transactions opportunities
++ * per microframe
++ */
++ sch_ep->pkts = max_burst + 1;
++ sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts;
++ } else if (udev->speed == USB_SPEED_SUPER) {
++ /* usb3_r1 spec section4.4.7 & 4.4.8 */
++ sch_ep->cs_count = 0;
++ esit_pkts = (mult + 1) * (max_burst + 1);
++ if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) {
++ sch_ep->pkts = esit_pkts;
++ sch_ep->num_budget_microframes = 1;
++ sch_ep->repeat = 0;
++ }
++
++ if (ep_type == ISOC_IN_EP || ep_type == ISOC_OUT_EP) {
++ if (esit_pkts <= sch_ep->esit)
++ sch_ep->pkts = 1;
++ else
++ sch_ep->pkts = roundup_pow_of_two(esit_pkts)
++ / sch_ep->esit;
++
++ sch_ep->num_budget_microframes =
++ DIV_ROUND_UP(esit_pkts, sch_ep->pkts);
++
++ if (sch_ep->num_budget_microframes > 1)
++ sch_ep->repeat = 1;
++ else
++ sch_ep->repeat = 0;
++ }
++ sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts;
++ } else if (is_fs_or_ls(udev->speed)) {
++ /*
++ * usb_20 spec section11.18.4
++ * assume worst cases
++ */
++ sch_ep->repeat = 0;
++ sch_ep->pkts = 1; /* at most one packet for each microframe */
++ if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) {
++ sch_ep->cs_count = 3; /* at most need 3 CS*/
++ /* one for SS and one for budgeted transaction */
++ sch_ep->num_budget_microframes = sch_ep->cs_count + 2;
++ sch_ep->bw_cost_per_microframe = max_packet_size;
++ }
++ if (ep_type == ISOC_OUT_EP) {
++ /* must never schedule a cs ISOC OUT ep */
++ sch_ep->cs_count = 0;
++ /*
++ * the best case FS budget assumes that 188 FS bytes
++ * occur in each microframe
++ */
++ sch_ep->num_budget_microframes = DIV_ROUND_UP(
++ sch_ep->max_packet_size, FS_PAYLOAD_MAX);
++ sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX;
++ }
++ if (ep_type == ISOC_IN_EP) {
++ /* at most need additional two CS. */
++ sch_ep->cs_count = DIV_ROUND_UP(
++ sch_ep->max_packet_size, FS_PAYLOAD_MAX) + 2;
++ sch_ep->num_budget_microframes = sch_ep->cs_count + 2;
++ sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX;
++ }
++ }
++}
++
++/* Get maximum bandwidth when we schedule at offset slot. */
++static u32 get_max_bw(struct mu3h_sch_bw_info *sch_bw,
++ struct mu3h_sch_ep_info *sch_ep, u32 offset)
++{
++ u32 num_esit;
++ u32 max_bw = 0;
++ int i;
++ int j;
++
++ num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit;
++ for (i = 0; i < num_esit; i++) {
++ u32 base = offset + i * sch_ep->esit;
++
++ for (j = 0; j < sch_ep->num_budget_microframes; j++) {
++ if (sch_bw->bus_bw[base + j] > max_bw)
++ max_bw = sch_bw->bus_bw[base + j];
++ }
++ }
++ return max_bw;
++}
++
++static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw,
++ struct mu3h_sch_ep_info *sch_ep, int bw_cost)
++{
++ u32 num_esit;
++ u32 base;
++ int i;
++ int j;
++
++ num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit;
++ for (i = 0; i < num_esit; i++) {
++ base = sch_ep->offset + i * sch_ep->esit;
++ for (j = 0; j < sch_ep->num_budget_microframes; j++)
++ sch_bw->bus_bw[base + j] += bw_cost;
++ }
++
++}
++
++static void debug_sch_ep(struct mu3h_sch_ep_info *sch_ep)
++{
++ pr_debug("sch_ep->ep_type = %d\n", sch_ep->ep_type);
++ pr_debug("sch_ep->max_packet_size = %d\n", sch_ep->max_packet_size);
++ pr_debug("sch_ep->esit = %d\n", sch_ep->esit);
++ pr_debug("sch_ep->num_budget_microframes = %d\n",
++ sch_ep->num_budget_microframes);
++ pr_debug("sch_ep->bw_cost_per_microframe = %d\n",
++ sch_ep->bw_cost_per_microframe);
++ pr_debug("sch_ep->ep = %p\n", sch_ep->ep);
++ pr_debug("sch_ep->offset = %d\n", sch_ep->offset);
++ pr_debug("sch_ep->repeat = %d\n", sch_ep->repeat);
++ pr_debug("sch_ep->pkts = %d\n", sch_ep->pkts);
++ pr_debug("sch_ep->cs_count = %d\n", sch_ep->cs_count);
++}
++
++static int check_sch_bw(struct usb_device *udev,
++ struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep)
++{
++ u32 offset;
++ u32 esit;
++ u32 num_budget_microframes;
++ u32 min_bw;
++ u32 min_index;
++ u32 worst_bw;
++ u32 bw_boundary;
++
++ if (sch_ep->esit > XHCI_MTK_MAX_ESIT)
++ sch_ep->esit = XHCI_MTK_MAX_ESIT;
++
++ esit = sch_ep->esit;
++ num_budget_microframes = sch_ep->num_budget_microframes;
++
++ /*
++ * Search through all possible schedule microframes.
++ * and find a microframe where its worst bandwidth is minimum.
++ */
++ min_bw = ~0;
++ min_index = 0;
++ for (offset = 0; offset < esit; offset++) {
++ if ((offset + num_budget_microframes) > sch_ep->esit)
++ break;
++ /*
++ * usb_20 spec section11.18:
++ * must never schedule Start-Split in Y6
++ */
++ if (is_fs_or_ls(udev->speed) && (offset % 8 == 6))
++ continue;
++
++ worst_bw = get_max_bw(sch_bw, sch_ep, offset);
++ if (min_bw > worst_bw) {
++ min_bw = worst_bw;
++ min_index = offset;
++ }
++ if (min_bw == 0)
++ break;
++ }
++ sch_ep->offset = min_index;
++
++ debug_sch_ep(sch_ep);
++
++ bw_boundary = (udev->speed == USB_SPEED_SUPER)
++ ? SS_BW_BOUNDARY : HS_BW_BOUNDARY;
++
++ /* check bandwidth */
++ if (min_bw + sch_ep->bw_cost_per_microframe > bw_boundary)
++ return -1;
++
++ /* update bus bandwidth info */
++ update_bus_bw(sch_bw, sch_ep, sch_ep->bw_cost_per_microframe);
++
++ return 0;
++}
++
++static void debug_sch_bw(struct mu3h_sch_bw_info *sch_bw)
++{
++ int i;
++
++ pr_debug("xhci_mtk_scheduler :bus_bw_info\n");
++ for (i = 0; i < XHCI_MTK_MAX_ESIT; i++)
++ pr_debug("%d ", sch_bw->bus_bw[i]);
++
++ pr_debug("\n");
++}
++
++
++static int need_bw_sch(struct usb_host_endpoint *ep,
++ enum usb_device_speed speed, int has_tt)
++{
++ /* only for synchronous endpoints */
++ if (usb_endpoint_xfer_control(&ep->desc)
++ || usb_endpoint_xfer_bulk(&ep->desc))
++ return 0;
++ /*
++ * for LS & FS synchronous endpoints which its device don't attach
++ * to TT are also ignored, root-hub will schedule them directly
++ */
++ if (is_fs_or_ls(speed) && !has_tt)
++ return 0;
++
++ return 1;
++}
++
++int xhci_mtk_init_quirk(struct xhci_hcd *xhci)
++{
++ struct usb_hcd *hcd = xhci_to_hcd(xhci);
++ struct device *dev = hcd->self.controller;
++ struct mu3h_sch_bw_info *sch_array;
++ size_t array_size;
++ int num_usb_bus;
++ int i;
++
++ /* ss IN and OUT are separated */
++ num_usb_bus = xhci->num_usb3_ports * 2 + xhci->num_usb2_ports;
++ array_size = sizeof(*sch_array) * num_usb_bus;
++
++ sch_array = kzalloc(array_size, GFP_KERNEL);
++ if (sch_array == NULL)
++ return -ENOMEM;
++
++ for (i = 0; i < num_usb_bus; i++)
++ INIT_LIST_HEAD(&sch_array[i].bw_ep_list);
++
++ dev->platform_data = sch_array;
++ xhci->quirks |= XHCI_MTK_HOST;
++ /*
++ * MTK host controller gives a spurious successful event after a
++ * short transfer. Ignore it.
++ */
++ xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
++
++ return 0;
++}
++
++
++void xhci_mtk_exit_quirk(struct xhci_hcd *xhci)
++{
++ struct usb_hcd *hcd = xhci_to_hcd(xhci);
++ struct mu3h_sch_bw_info *sch_array;
++
++ sch_array = dev_get_platdata(hcd->self.controller);
++ kfree(sch_array);
++}
++
++
++int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
++ struct usb_host_endpoint *ep)
++{
++ int ret = 0;
++ int port_id;
++ int bw_index;
++ struct xhci_hcd *xhci;
++ unsigned int ep_index;
++ struct xhci_ep_ctx *ep_ctx;
++ struct xhci_slot_ctx *slot_ctx;
++ struct xhci_virt_device *virt_dev;
++ struct mu3h_sch_bw_info *sch_bw;
++ struct mu3h_sch_ep_info *sch_ep;
++ struct mu3h_sch_bw_info *sch_array;
++
++ xhci = hcd_to_xhci(hcd);
++ virt_dev = xhci->devs[udev->slot_id];
++ ep_index = xhci_get_endpoint_index(&ep->desc);
++ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
++ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
++ sch_array = dev_get_platdata(hcd->self.controller);
++
++ port_id = virt_dev->real_port;
++ xhci_dbg(xhci, "%s() xfer_type: %d, speed:%d, ep:%p\n", __func__,
++ usb_endpoint_type(&ep->desc), udev->speed, ep);
++
++ if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT))
++ return 0;
++
++ bw_index = get_bw_index(xhci, udev, ep);
++ sch_bw = &sch_array[bw_index];
++
++ sch_ep = kzalloc(sizeof(struct mu3h_sch_ep_info), GFP_KERNEL);
++ if (!sch_ep)
++ return -ENOMEM;
++
++ setup_sch_info(udev, ep_ctx, sch_ep);
++
++ ret = check_sch_bw(udev, sch_bw, sch_ep);
++ if (ret) {
++ xhci_err(xhci, "Not enough bandwidth!\n");
++ kfree(sch_ep);
++ return -ENOSPC;
++ }
++
++ list_add_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list);
++ sch_ep->ep = ep;
++
++ ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(sch_ep->pkts)
++ | EP_BCSCOUNT(sch_ep->cs_count) | EP_BBM(sch_ep->burst_mode));
++ ep_ctx->reserved[1] |= cpu_to_le32(EP_BOFFSET(sch_ep->offset)
++ | EP_BREPEAT(sch_ep->repeat));
++
++ debug_sch_bw(sch_bw);
++ return 0;
++}
++
++void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
++ struct usb_host_endpoint *ep)
++{
++ int bw_index;
++ struct xhci_hcd *xhci;
++ struct xhci_slot_ctx *slot_ctx;
++ struct xhci_virt_device *virt_dev;
++ struct mu3h_sch_bw_info *sch_array;
++ struct mu3h_sch_bw_info *sch_bw;
++ struct mu3h_sch_ep_info *sch_ep;
++
++ xhci = hcd_to_xhci(hcd);
++ virt_dev = xhci->devs[udev->slot_id];
++ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
++ sch_array = dev_get_platdata(hcd->self.controller);
++
++ xhci_dbg(xhci, "%s() xfer_type: %d, speed:%d, ep:%p\n", __func__,
++ usb_endpoint_type(&ep->desc), udev->speed, ep);
++
++ if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT))
++ return;
++
++ bw_index = get_bw_index(xhci, udev, ep);
++ sch_bw = &sch_array[bw_index];
++
++ list_for_each_entry(sch_ep, &sch_bw->bw_ep_list, endpoint) {
++ if (sch_ep->ep == ep) {
++ update_bus_bw(sch_bw, sch_ep,
++ -sch_ep->bw_cost_per_microframe);
++ list_del(&sch_ep->endpoint);
++ kfree(sch_ep);
++ break;
++ }
++ }
++ debug_sch_bw(sch_bw);
++}
++
++
++/*
++ * The TD size is the number of bytes remaining in the TD (including this TRB),
++ * right shifted by 10.
++ * It must fit in bits 21:17, so it can't be bigger than 31.
++ */
++u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total,
++ unsigned trb_buffer_length, struct urb *urb)
++{
++ u32 max = 31;
++ int remainder, td_packet_count, packet_transferred;
++ unsigned int td_transfer_size = urb->transfer_buffer_length;
++ unsigned int maxp;
++
++ maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
++
++ /* 0 for the last TRB */
++ if (td_running_total + trb_buffer_length == td_transfer_size)
++ return 0;
++
++ packet_transferred = td_running_total / maxp;
++ td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp);
++ remainder = td_packet_count - packet_transferred;
++
++ if (remainder > max)
++ return max << 17;
++ else
++ return remainder << 17;
++}
++
++
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk.h
+@@ -0,0 +1,119 @@
++/*
++ * Copyright (c) 2015 MediaTek Inc.
++ * Author:
++ * Zhigang.Wun <zhigang.wei@mediatek.com>
++ * Chunfeng.Yun <chunfeng.yun@mediatek.com>
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#ifndef _XHCI_MTK_H_
++#define _XHCI_MTK_H_
++
++#include "xhci.h"
++
++/**
++ * To simplify scheduler algorithm, set a upper limit for ESIT,
++ * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT,
++ * round down to the limit value, that means allocating more
++ * bandwidth to it.
++ */
++#define XHCI_MTK_MAX_ESIT 64
++
++/**
++ * struct mu3h_sch_bw_info
++ * @bus_bw: array to keep track of bandwidth already used at each uframes
++ * @bw_ep_list: eps in the bandwidth domain
++ *
++ * treat a HS root port as a bandwidth domain, but treat a SS root port as
++ * two bandwidth domains, one for IN eps and another for OUT eps.
++ */
++struct mu3h_sch_bw_info {
++ u32 bus_bw[XHCI_MTK_MAX_ESIT];
++ struct list_head bw_ep_list;
++};
++
++/**
++ * struct mu3h_sch_ep_info
++ * @esit: unit is 125us, equal to 2 << Interval field in ep-context
++ * @num_budget_microframes: number of continuous uframes
++ * (@repeat==1) scheduled within the interval
++ * @ep: address of usb_host_endpoint
++ * @offset: which uframe of the interval that transfer should be
++ * scheduled first time within the interval
++ * @repeat: the time gap between two uframes that transfers are
++ * scheduled within a interval. in the simple algorithm, only
++ * assign 0 or 1 to it; 0 means using only one uframe in a
++ * interval, and1 means using @num_budget_microframes
++ * continuous uframes
++ * @pkts: number of packets to be transferred in the scheduled uframes
++ * @cs_count: number of CS that host will trigger
++ */
++struct mu3h_sch_ep_info {
++ u32 ep_type;
++ u32 max_packet_size;
++ u32 esit;
++ u32 num_budget_microframes;
++ u32 bw_cost_per_microframe;
++ void *ep;
++ struct list_head endpoint;
++
++ /* mtk xhci scheduling info */
++ u32 offset;
++ u32 repeat;
++ u32 pkts;
++ u32 cs_count;
++ u32 burst_mode;
++};
++
++
++#if IS_ENABLED(CONFIG_USB_XHCI_MTK)
++
++int xhci_mtk_init_quirk(struct xhci_hcd *xhci);
++void xhci_mtk_exit_quirk(struct xhci_hcd *xhci);
++int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
++ struct usb_host_endpoint *ep);
++void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
++ struct usb_host_endpoint *ep);
++u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total,
++ unsigned trb_buffer_length, struct urb *urb);
++
++#else
++static inline int xhci_mtk_init_quirk(struct xhci_hcd *xhci)
++{
++ return 0;
++}
++
++static inline void xhci_mtk_exit_quirk(struct xhci_hcd *xhci)
++{
++}
++
++static inline int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd,
++ struct usb_device *udev, struct usb_host_endpoint *ep)
++{
++ return 0;
++}
++
++static inline void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd,
++ struct usb_device *udev, struct usb_host_endpoint *ep)
++{
++ return 0;
++}
++
++static inline u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total,
++ unsigned trb_buffer_length, struct urb *urb)
++{
++ return 0;
++}
++
++#endif
++
++#endif /* _XHCI_MTK_H_ */
+--- a/drivers/usb/host/xhci-plat.c
++++ b/drivers/usb/host/xhci-plat.c
+@@ -23,6 +23,7 @@
+ #include "xhci.h"
+ #include "xhci-mvebu.h"
+ #include "xhci-rcar.h"
++#include "xhci-mtk.h"
+
+ static struct hc_driver __read_mostly xhci_plat_hc_driver;
+
+@@ -49,7 +50,23 @@
+ return ret;
+ }
+
+- return xhci_gen_setup(hcd, xhci_plat_quirks);
++ ret = xhci_gen_setup(hcd, xhci_plat_quirks);
++ if (ret)
++ return ret;
++
++ if (of_device_is_compatible(of_node, "mediatek,mt8173-xhci")) {
++ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
++
++ if (!usb_hcd_is_primary_hcd(hcd))
++ return 0;
++ ret = xhci_mtk_init_quirk(xhci);
++ if (ret) {
++ kfree(xhci);
++ return ret;
++ }
++ }
++
++ return ret;
+ }
+
+ static int xhci_plat_start(struct usb_hcd *hcd)
+@@ -207,6 +224,8 @@
+ if (!IS_ERR(clk))
+ clk_disable_unprepare(clk);
+ usb_put_hcd(hcd);
++ if (xhci->quirks & XHCI_MTK_HOST)
++ xhci_mtk_exit_quirk(xhci);
+ kfree(xhci);
+
+ return 0;
+@@ -253,6 +272,7 @@
+ { .compatible = "marvell,armada-380-xhci"},
+ { .compatible = "renesas,xhci-r8a7790"},
+ { .compatible = "renesas,xhci-r8a7791"},
++ { .compatible = "mediatek,mt8173-xhci"},
+ { },
+ };
+ MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
+--- a/drivers/usb/host/xhci-ring.c
++++ b/drivers/usb/host/xhci-ring.c
+@@ -68,6 +68,7 @@
+ #include <linux/slab.h>
+ #include "xhci.h"
+ #include "xhci-trace.h"
++#include "xhci-mtk.h"
+
+ /*
+ * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
+@@ -3163,9 +3164,14 @@
+
+ /* Set the TRB length, TD size, and interrupter fields. */
+ if (xhci->hci_version < 0x100) {
+- remainder = xhci_td_remainder(
++ if (xhci->quirks & XHCI_MTK_HOST) {
++ remainder = xhci_mtk_td_remainder_quirk(
++ running_total, trb_buff_len, urb);
++ } else {
++ remainder = xhci_td_remainder(
+ urb->transfer_buffer_length -
+ running_total);
++ }
+ } else {
+ remainder = xhci_v1_0_td_remainder(running_total,
+ trb_buff_len, total_packet_count, urb,
+@@ -3336,9 +3342,14 @@
+
+ /* Set the TRB length, TD size, and interrupter fields. */
+ if (xhci->hci_version < 0x100) {
+- remainder = xhci_td_remainder(
++ if (xhci->quirks & XHCI_MTK_HOST) {
++ remainder = xhci_mtk_td_remainder_quirk(
++ running_total, trb_buff_len, urb);
++ } else {
++ remainder = xhci_td_remainder(
+ urb->transfer_buffer_length -
+ running_total);
++ }
+ } else {
+ remainder = xhci_v1_0_td_remainder(running_total,
+ trb_buff_len, total_packet_count, urb,
+@@ -3457,8 +3468,14 @@
+ field = TRB_TYPE(TRB_DATA);
+
+ length_field = TRB_LEN(urb->transfer_buffer_length) |
+- xhci_td_remainder(urb->transfer_buffer_length) |
+ TRB_INTR_TARGET(0);
++
++ if (xhci->quirks & XHCI_MTK_HOST)
++ length_field |= xhci_mtk_td_remainder_quirk(0,
++ urb->transfer_buffer_length, urb);
++ else
++ length_field |= xhci_td_remainder(urb->transfer_buffer_length);
++
+ if (urb->transfer_buffer_length > 0) {
+ if (setup->bRequestType & USB_DIR_IN)
+ field |= TRB_DIR_IN;
+@@ -3682,8 +3699,14 @@
+
+ /* Set the TRB length, TD size, & interrupter fields. */
+ if (xhci->hci_version < 0x100) {
+- remainder = xhci_td_remainder(
+- td_len - running_total);
++ if (xhci->quirks & XHCI_MTK_HOST) {
++ remainder = xhci_mtk_td_remainder_quirk(
++ running_total, trb_buff_len,
++ urb);
++ } else {
++ remainder = xhci_td_remainder(
++ td_len - running_total);
++ }
+ } else {
+ remainder = xhci_v1_0_td_remainder(
+ running_total, trb_buff_len,
+--- a/drivers/usb/host/xhci.c
++++ b/drivers/usb/host/xhci.c
+@@ -31,6 +31,7 @@
+
+ #include "xhci.h"
+ #include "xhci-trace.h"
++#include "xhci-mtk.h"
+
+ #define DRIVER_AUTHOR "Sarah Sharp"
+ #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
+@@ -624,7 +625,11 @@
+ "// Set the interrupt modulation register");
+ temp = readl(&xhci->ir_set->irq_control);
+ temp &= ~ER_IRQ_INTERVAL_MASK;
+- temp |= (u32) 160;
++ /*
++ * the increment interval is 8 times as much as that defined
++ * in xHCI spec on MTK's controller
++ */
++ temp |= (u32) ((xhci->quirks & XHCI_MTK_HOST) ? 20 : 160);
+ writel(temp, &xhci->ir_set->irq_control);
+
+ /* Set the HCD state before we enable the irqs */
+@@ -1698,6 +1703,9 @@
+
+ xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+
++ if (xhci->quirks & XHCI_MTK_HOST)
++ xhci_mtk_drop_ep_quirk(hcd, udev, ep);
++
+ xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
+ (unsigned int) ep->desc.bEndpointAddress,
+ udev->slot_id,
+@@ -1793,6 +1801,12 @@
+ return -ENOMEM;
+ }
+
++ if (xhci->quirks & XHCI_MTK_HOST) {
++ ret = xhci_mtk_add_ep_quirk(hcd, udev, ep);
++ if (ret < 0)
++ return ret;
++ }
++
+ ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
+ new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
+
+--- a/drivers/usb/host/xhci.h
++++ b/drivers/usb/host/xhci.h
+@@ -1568,6 +1568,7 @@
+ /* For controllers with a broken beyond repair streams implementation */
+ #define XHCI_BROKEN_STREAMS (1 << 19)
+ #define XHCI_PME_STUCK_QUIRK (1 << 20)
++#define XHCI_MTK_HOST (1 << 21)
+ unsigned int num_active_eps;
+ unsigned int limit_active_eps;
+ /* There are two roothubs to keep track of bus suspend info for */