diff options
Diffstat (limited to 'target/linux/mpc85xx/base-files/etc')
3 files changed, 0 insertions, 151 deletions
diff --git a/target/linux/mpc85xx/base-files/etc/diag.sh b/target/linux/mpc85xx/base-files/etc/diag.sh deleted file mode 100755 index 123a90d..0000000 --- a/target/linux/mpc85xx/base-files/etc/diag.sh +++ /dev/null @@ -1,31 +0,0 @@ -#!/bin/sh -# Copyright (C) 2013 OpenWrt.org - -. /lib/functions/leds.sh -. /lib/mpc85xx.sh - -get_status_led() { - case $(mpc85xx_board_name) in - tl-wdr4900-v1) - status_led="tp-link:blue:system" - ;; - esac -} - -set_state() { - get_status_led - - case "$1" in - preinit) - status_led_blink_preinit - ;; - - failsafe) - status_led_blink_failsafe - ;; - - done) - status_led_on - ;; - esac -} diff --git a/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom deleted file mode 100644 index 0baec28..0000000 --- a/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ /dev/null @@ -1,71 +0,0 @@ -#!/bin/sh - -FW_FILE="/lib/firmware/$FIRMWARE" - -ath9k_eeprom_die() { - echo "ath9k eeprom: " "$*" >&2 - exit 1 -} - -ath9k_eeprom_extract() { - local part=$1 - local offset=$2 - local count=$3 - local mtd - - . /lib/functions.sh - . /lib/functions/system.sh - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath9k_eeprom_die "no mtd device found for partition $part" - - dd if=$mtd bs=$offset skip=1 count=1 2>/dev/null | dd of=$FW_FILE bs=$count count=1 2>/dev/null || \ - ath9k_eeprom_die "failed to extract from $mtd" -} - -tpl_set_wireless_mac() -{ - local offset=$1 - local mac - - . /lib/functions.sh - . /lib/functions/system.sh - - mac=$(mtd_get_mac_binary u-boot 326656) - mac=$(macaddr_add $mac $offset) - - macaddr_2bin $mac | dd bs=1 count=6 seek=2 conv=notrunc of=$FW_FILE 2>/dev/null -} - -[ -e $FW_FILE ] && exit 0 - -. /lib/mpc85xx.sh - -board=$(mpc85xx_board_name) - -case "$FIRMWARE" in -"pci_wmac0.eeprom") - case $board in - tl-wdr4900-v1) - ath9k_eeprom_extract "caldata" 4096 2048 - tpl_set_wireless_mac 0 - ;; - *) - ath9k_eeprom_die "board $board is not supported yet" - ;; - esac - ;; - -"pci_wmac1.eeprom") - case $board in - tl-wdr4900-v1) - ath9k_eeprom_extract "caldata" 20480 2048 - tpl_set_wireless_mac -1 - ;; - *) - ath9k_eeprom_die "board $board is not supported yet" - ;; - esac - ;; -esac diff --git a/target/linux/mpc85xx/base-files/etc/uci-defaults/02_network b/target/linux/mpc85xx/base-files/etc/uci-defaults/02_network deleted file mode 100755 index 10a2cc8..0000000 --- a/target/linux/mpc85xx/base-files/etc/uci-defaults/02_network +++ /dev/null @@ -1,49 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2013 OpenWrt.org -# - -tplink_set_mac() -{ - local cfg=$1 - local offset=$2 - local mac - - . /lib/functions.sh - - mac=$(mtd_get_mac_binary u-boot 326656) - mac=$(macaddr_add $mac $offset) - - ucidef_set_interface_macaddr $cfg $mac -} - - -[ -e /etc/config/network ] && exit 0 - -touch /etc/config/network - -. /lib/functions/uci-defaults.sh -. /lib/mpc85xx.sh - -ucidef_set_interface_loopback - -board=$(mpc85xx_board_name) - -case "$board" in -tl-wdr4900-v1) - ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5" - ucidef_add_switch_vlan "switch0" "2" "0t 1" - tplink_set_mac lan -2 - tplink_set_mac wan 1 - ;; - -*) - ucidef_set_interfaces_lan_wan "eth0" "eth1" - ;; -esac - -uci commit network - -exit 0 |