summaryrefslogtreecommitdiff
path: root/target/linux/mvebu/patches-3.10/0130-mtd-nand-pxa3xx-Allocate-data-buffer-on-detected-fla.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mvebu/patches-3.10/0130-mtd-nand-pxa3xx-Allocate-data-buffer-on-detected-fla.patch')
-rw-r--r--target/linux/mvebu/patches-3.10/0130-mtd-nand-pxa3xx-Allocate-data-buffer-on-detected-fla.patch143
1 files changed, 143 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-3.10/0130-mtd-nand-pxa3xx-Allocate-data-buffer-on-detected-fla.patch b/target/linux/mvebu/patches-3.10/0130-mtd-nand-pxa3xx-Allocate-data-buffer-on-detected-fla.patch
new file mode 100644
index 0000000..09f022b
--- /dev/null
+++ b/target/linux/mvebu/patches-3.10/0130-mtd-nand-pxa3xx-Allocate-data-buffer-on-detected-fla.patch
@@ -0,0 +1,143 @@
+From 71d6267980d7590e38059a784785ca158e361f87 Mon Sep 17 00:00:00 2001
+From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Date: Fri, 4 Oct 2013 15:30:38 -0300
+Subject: [PATCH 130/203] mtd: nand: pxa3xx: Allocate data buffer on detected
+ flash size
+
+This commit replaces the currently hardcoded buffer size, by a
+dynamic detection scheme. First a small 256 bytes buffer is allocated
+so the device can be detected (using READID and friends commands).
+
+After detection, this buffer is released and a new buffer is allocated
+to acommodate the page size plus out-of-band size.
+
+Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Tested-by: Daniel Mack <zonque@gmail.com>
+Signed-off-by: Brian Norris <computersforpeace@gmail.com>
+---
+ drivers/mtd/nand/pxa3xx_nand.c | 45 ++++++++++++++++++++++++++++--------------
+ 1 file changed, 30 insertions(+), 15 deletions(-)
+
+--- a/drivers/mtd/nand/pxa3xx_nand.c
++++ b/drivers/mtd/nand/pxa3xx_nand.c
+@@ -39,6 +39,13 @@
+ #define NAND_STOP_DELAY (2 * HZ/50)
+ #define PAGE_CHUNK_SIZE (2048)
+
++/*
++ * Define a buffer size for the initial command that detects the flash device:
++ * STATUS, READID and PARAM. The largest of these is the PARAM command,
++ * needing 256 bytes.
++ */
++#define INIT_BUFFER_SIZE 256
++
+ /* registers and bit definitions */
+ #define NDCR (0x00) /* Control register */
+ #define NDTR0CS0 (0x04) /* Timing Parameter 0 for CS0 */
+@@ -164,6 +171,7 @@ struct pxa3xx_nand_info {
+
+ unsigned int buf_start;
+ unsigned int buf_count;
++ unsigned int buf_size;
+
+ /* DMA information */
+ int drcmr_dat;
+@@ -911,26 +919,20 @@ static int pxa3xx_nand_detect_config(str
+ return 0;
+ }
+
+-/* the maximum possible buffer size for large page with OOB data
+- * is: 2048 + 64 = 2112 bytes, allocate a page here for both the
+- * data buffer and the DMA descriptor
+- */
+-#define MAX_BUFF_SIZE PAGE_SIZE
+-
+ #ifdef ARCH_HAS_DMA
+ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
+ {
+ struct platform_device *pdev = info->pdev;
+- int data_desc_offset = MAX_BUFF_SIZE - sizeof(struct pxa_dma_desc);
++ int data_desc_offset = info->buf_size - sizeof(struct pxa_dma_desc);
+
+ if (use_dma == 0) {
+- info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL);
++ info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
+ if (info->data_buff == NULL)
+ return -ENOMEM;
+ return 0;
+ }
+
+- info->data_buff = dma_alloc_coherent(&pdev->dev, MAX_BUFF_SIZE,
++ info->data_buff = dma_alloc_coherent(&pdev->dev, info->buf_size,
+ &info->data_buff_phys, GFP_KERNEL);
+ if (info->data_buff == NULL) {
+ dev_err(&pdev->dev, "failed to allocate dma buffer\n");
+@@ -944,7 +946,7 @@ static int pxa3xx_nand_init_buff(struct
+ pxa3xx_nand_data_dma_irq, info);
+ if (info->data_dma_ch < 0) {
+ dev_err(&pdev->dev, "failed to request data dma\n");
+- dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
++ dma_free_coherent(&pdev->dev, info->buf_size,
+ info->data_buff, info->data_buff_phys);
+ return info->data_dma_ch;
+ }
+@@ -962,7 +964,7 @@ static void pxa3xx_nand_free_buff(struct
+ struct platform_device *pdev = info->pdev;
+ if (use_dma) {
+ pxa_free_dma(info->data_dma_ch);
+- dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
++ dma_free_coherent(&pdev->dev, info->buf_size,
+ info->data_buff, info->data_buff_phys);
+ } else {
+ kfree(info->data_buff);
+@@ -971,7 +973,7 @@ static void pxa3xx_nand_free_buff(struct
+ #else
+ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
+ {
+- info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL);
++ info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
+ if (info->data_buff == NULL)
+ return -ENOMEM;
+ return 0;
+@@ -1085,7 +1087,16 @@ KEEP_CONFIG:
+ else
+ host->col_addr_cycles = 1;
+
++ /* release the initial buffer */
++ kfree(info->data_buff);
++
++ /* allocate the real data + oob buffer */
++ info->buf_size = mtd->writesize + mtd->oobsize;
++ ret = pxa3xx_nand_init_buff(info);
++ if (ret)
++ return ret;
+ info->oob_buff = info->data_buff + mtd->writesize;
++
+ if ((mtd->size >> chip->page_shift) > 65536)
+ host->row_addr_cycles = 3;
+ else
+@@ -1191,9 +1202,13 @@ static int alloc_nand_resource(struct pl
+ }
+ info->mmio_phys = r->start;
+
+- ret = pxa3xx_nand_init_buff(info);
+- if (ret)
++ /* Allocate a buffer to allow flash detection */
++ info->buf_size = INIT_BUFFER_SIZE;
++ info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
++ if (info->data_buff == NULL) {
++ ret = -ENOMEM;
+ goto fail_disable_clk;
++ }
+
+ /* initialize all interrupts to be disabled */
+ disable_int(info, NDSR_MASK);
+@@ -1211,7 +1226,7 @@ static int alloc_nand_resource(struct pl
+
+ fail_free_buf:
+ free_irq(irq, info);
+- pxa3xx_nand_free_buff(info);
++ kfree(info->data_buff);
+ fail_disable_clk:
+ clk_disable_unprepare(info->clk);
+ return ret;