1 files changed, 0 insertions, 96 deletions
diff --git a/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c b/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c
deleted file mode 100644
index 7c8c4cf..0000000
--- a/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * arch/arm/mach-ox820/rps-time.c
- *
- * Copyright (C) 2009 Oxford Semiconductor Ltd
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/sched_clock.h>
-#include <mach/hardware.h>
-
-enum {
-	TIMER_LOAD = 0,
-	TIMER_CURR = 4,
-	TIMER_CTRL = 8,
-	TIMER_CLRINT = 0xC,
-
-	TIMER_BITS = 24,
-
-	TIMER_MAX_VAL = (1 << TIMER_BITS) - 1,
-
-	TIMER_PERIODIC = (1 << 6),
-	TIMER_ENABLE = (1 << 7),
-
-	TIMER_DIV1  = (0 << 2),
-	TIMER_DIV16  = (1 << 2),
-	TIMER_DIV256  = (2 << 2),
-
-	TIMER1_OFFSET = 0,
-	TIMER2_OFFSET = 0x20,
-
-};
-
-static u64 notrace rps_read_sched_clock(void)
-{
-	return ~readl_relaxed(RPSA_TIMER2_VAL);
-}
-
-static void __init rps_clocksource_init(void __iomem *base, ulong ref_rate)
-{
-	int ret;
-	ulong clock_rate;
-	/* use prescale 16 */
-	clock_rate = ref_rate / 16;
-
-	iowrite32(TIMER_MAX_VAL, base + TIMER_LOAD);
-	iowrite32(TIMER_PERIODIC | TIMER_ENABLE | TIMER_DIV16,
-			base + TIMER_CTRL);
-
-	ret = clocksource_mmio_init(base + TIMER_CURR, "rps_clocksource_timer",
-					clock_rate, 250, TIMER_BITS,
-					clocksource_mmio_readl_down);
-	if (ret)
-		panic("can't register clocksource\n");
-
-	sched_clock_register(rps_read_sched_clock, TIMER_BITS, clock_rate);
-}
-
-static void __init rps_timer_init(struct device_node *np)
-{
-	struct clk *refclk;
-	unsigned long ref_rate;
-	void __iomem *base;
-
-	refclk = of_clk_get(np, 0);
-
-	if (IS_ERR(refclk) || clk_prepare_enable(refclk))
-		panic("rps_timer_init: failed to get refclk\n");
-	ref_rate = clk_get_rate(refclk);
-
-	base = of_iomap(np, 0);
-	if (!base)
-		panic("rps_timer_init: failed to map io\n");
-
-	rps_clocksource_init(base + TIMER2_OFFSET, ref_rate);
-}
-
-CLOCKSOURCE_OF_DECLARE(nas782x, "plxtech,nas782x-rps-timer", rps_timer_init);