diff options
Diffstat (limited to 'target/linux/ramips/files-3.7/arch/mips')
117 files changed, 11122 insertions, 0 deletions
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/common.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/common.h new file mode 100644 index 0000000..bb6e12b --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/common.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_RALINK_COMMON_H +#define __ASM_MACH_RALINK_COMMON_H + +#define RAMIPS_SYS_TYPE_LEN 64 +extern unsigned char ramips_sys_type[RAMIPS_SYS_TYPE_LEN]; +extern unsigned long ramips_mem_base; +extern unsigned long ramips_mem_size_min; +extern unsigned long ramips_mem_size_max; +extern unsigned long (*ramips_get_mem_size)(void); + +void ramips_intc_irq_init(unsigned intc_base, unsigned irq, unsigned irq_base); +u32 ramips_intc_get_status(void); + +void ramips_soc_prom_init(void); +void ramips_soc_setup(void); +void ramips_early_serial_setup(int line, unsigned base, unsigned freq, + unsigned irq); + +#endif /* __ASM_MACH_RALINK_COMMON_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-buttons.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-buttons.h new file mode 100644 index 0000000..8eb5e16 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-buttons.h @@ -0,0 +1,29 @@ +/* + * Ralink SoC GPIO button support + * + * Copyright (C) 2010-2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_RALINK_DEV_GPIO_BUTTONS_H +#define __ASM_MACH_RALINK_DEV_GPIO_BUTTONS_H + +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#ifdef CONFIG_RALINK_DEV_GPIO_BUTTONS +void +ramips_register_gpio_buttons(int id, unsigned poll_interval, unsigned nbuttons, + struct gpio_keys_button *buttons); +#else +static inline void +ramips_register_gpio_buttons(int id, unsigned poll_interval, unsigned nbuttons, + struct gpio_keys_button *buttons) +{ +} +#endif + +#endif /* __ASM_MACH_RALINK_DEV_GPIO_BUTTONS_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-leds.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-leds.h new file mode 100644 index 0000000..24233ab --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-leds.h @@ -0,0 +1,26 @@ +/* + * Ralink SoC GPIO LED device support + * + * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_RALINK_DEV_GPIO_LEDS_H +#define __ASM_MACH_RALINK_DEV_GPIO_LEDS_H + +#include <linux/leds.h> + +#ifdef CONFIG_RALINK_DEV_GPIO_LEDS +void ramips_register_gpio_leds(int id, unsigned num_leds, + struct gpio_led *leds); +#else +static inline void ramips_register_gpio_leds(int id, unsigned num_leds, + struct gpio_led *leds) +{ +} +#endif + +#endif /* __ASM_MACH_RALINK_DEV_GPIO_LEDS_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/gpio.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/gpio.h new file mode 100644 index 0000000..f68ee16 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/gpio.h @@ -0,0 +1,24 @@ +/* + * Ralink SoC GPIO API support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef __ASM_MACH_RALINK_GPIO_H +#define __ASM_MACH_RALINK_GPIO_H + +#define ARCH_NR_GPIOS 128 +#include <asm-generic/gpio.h> + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +#endif /* __ASM_MACH_RALINK_GPIO_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/machine.h new file mode 100644 index 0000000..200f737 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/machine.h @@ -0,0 +1,88 @@ +/* + * Ralink machine types + * + * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com> + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mips_machine.h> + +enum ramips_mach_type { + RAMIPS_MACH_GENERIC, + /* RT2880 based machines */ + RAMIPS_MACH_F5D8235_V1, /* Belkin F5D8235 v1 */ + RAMIPS_MACH_BR6524N, /* Edimax BR6524N */ + RAMIPS_MACH_RT_N15, /* Asus RT-N15 */ + RAMIPS_MACH_V11ST_FE, /* Ralink V11ST-FE */ + RAMIPS_MACH_WLI_TX4_AG300N, /* Buffalo WLI-TX4-AG300N */ + RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */ + + /* RT3050 based machines */ + RAMIPS_MACH_3G_6200N, /* Edimax 3G-6200N */ + RAMIPS_MACH_ALL0256N, /* Allnet ALL0256N */ + RAMIPS_MACH_CARAMBOLA, /* 8devices Carambola */ + RAMIPS_MACH_DIR_300_B1, /* D-Link DIR-300 B1 */ + RAMIPS_MACH_DIR_600_B1, /* D-Link DIR-600 B1 */ + RAMIPS_MACH_DIR_600_B2, /* D-Link DIR-600 B2 */ + RAMIPS_MACH_DIR_615_D, /* D-Link DIR-615 D */ + RAMIPS_MACH_DIR_620_A1, /* D-Link DIR-620 A1 */ + RAMIPS_MACH_RT_G32_B1, /* Asus RT-G32 B1 */ + RAMIPS_MACH_RT_N10_PLUS, /* Asus RT-N10+ */ + RAMIPS_MACH_NW718, /* Netcore NW718 */ + RAMIPS_MACH_WL_330N, /* Asus WL-330N */ + RAMIPS_MACH_WL_330N3G, /* Asus WL-330N3G */ + + /* RT3052 based machines */ + RAMIPS_MACH_3G300M, /* Tenda 3G300M */ + RAMIPS_MACH_ALL0239_3G, /* ALL0239-3G */ + RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */ + RAMIPS_MACH_BC2, /* NexAira BC2 */ + RAMIPS_MACH_BR6425, /* Edimax BR-6425 */ + RAMIPS_MACH_BROADWAY, /* Hauppauge Broadway */ + RAMIPS_MACH_DAP_1350, /* D-Link DAP-1350 */ + RAMIPS_MACH_ESR_9753, /* Senao / EnGenius ESR-9753*/ + RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */ + RAMIPS_MACH_FONERA20N, /* La Fonera 2.0N */ + RAMIPS_MACH_RT_N13U, /* ASUS RT-N13U */ + RAMIPS_MACH_FREESTATION5, /* ARC Freestation5 */ + RAMIPS_MACH_HW550_3G, /* Aztech HW550-3G */ + RAMIPS_MACH_MOFI3500_3GN, /* MoFi Network MOFI3500-3GN */ + RAMIPS_MACH_NBG_419N, /* ZyXEL NBG-419N */ + RAMIPS_MACH_OMNI_EMB, /* Omnima MiniEMBWiFi */ + RAMIPS_MACH_PSR_680W, /* Petatel PSR-680W Wireless 3G Router*/ + RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */ + RAMIPS_MACH_SL_R7205, /* Skylink SL-R7205 Wireless 3G Router*/ + RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */ + RAMIPS_MACH_W306R_V20, /* Tenda W306R_V20 */ + RAMIPS_MACH_W502U, /* ALFA Networks W502U */ + RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */ + RAMIPS_MACH_WHR_G300N, /* Buffalo WHR-G300N */ + RAMIPS_MACH_WL341V3, /* Sitecom WL-341 v3 */ + RAMIPS_MACH_WL351, /* Sitecom WL-351 v1 002 */ + RAMIPS_MACH_WR512_3GN, /* SH-WR512NU/WS-WR512N1-like 3GN*/ + RAMIPS_MACH_WR6202, /* Accton WR6202 */ + RAMIPS_MACH_MZKW300NH2, /* Planex MZK-W300NH2 Router */ + RAMIPS_MACH_XDXRN502J, /* unknown XDX-RN502J */ + RAMIPS_MACH_UR_326N4G, /* UPVEL ROUTER */ + RAMIPS_MACH_UR_336UN, /* UPVEL ROUTER */ + + /* RT3352 based machines */ + RAMIPS_MACH_ALL5002, /* Allnet ALL5002 */ + RAMIPS_MACH_DIR_615_H1, + + /* RT3662 based machines */ + RAMIPS_MACH_DIR_645, /* D-Link DIR-645 */ + RAMIPS_MACH_OMNI_EMB_HPM, /* Omnima EMB HPM */ + RAMIPS_MACH_RT_N56U, /* Asus RT-N56U */ + + /* RT3883 based machines */ + RAMIPS_MACH_TEW_691GR, /* TRENDnet TEW-691GR */ + RAMIPS_MACH_TEW_692GR, /* TRENDnet TEW-692GR */ + + /* RT5350 based machines */ + RAMIPS_MACH_AIR3GII, /* AirLive Air3GII */ +}; diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_eth_platform.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_eth_platform.h new file mode 100644 index 0000000..57c0556 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_eth_platform.h @@ -0,0 +1,41 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * based on Ralink SDK3.3 + * Copyright (C) 2009 John Crispin <blogic@openwrt.org> + */ + +#ifndef _RAMIPS_ETH_PLATFORM_H +#define _RAMIPS_ETH_PLATFORM_H + +#include <linux/phy.h> + +struct ramips_eth_platform_data +{ + unsigned char mac[6]; + void (*reset_fe)(void); + int min_pkt_len; + unsigned long sys_freq; + + int speed; + int duplex; + int tx_fc; + int rx_fc; + + u32 phy_mask; + phy_interface_t phy_if_mode; +}; + +#endif /* _RAMIPS_ETH_PLATFORM_H */ + diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_gpio.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_gpio.h new file mode 100644 index 0000000..32fc7a7 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_gpio.h @@ -0,0 +1,48 @@ +/* + * Ralink SoC specific GPIO support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RAMIPS_GPIO_H +#define _RAMIPS_GPIO_H + +#include <linux/gpio.h> +#include <linux/spinlock.h> + +enum ramips_gpio_reg { + RAMIPS_GPIO_REG_INT = 0, /* Interrupt status */ + RAMIPS_GPIO_REG_EDGE, + RAMIPS_GPIO_REG_RENA, + RAMIPS_GPIO_REG_FENA, + RAMIPS_GPIO_REG_DATA, + RAMIPS_GPIO_REG_DIR, /* Direction, 0:in, 1: out */ + RAMIPS_GPIO_REG_POL, /* Polarity, 0: normal, 1: invert */ + RAMIPS_GPIO_REG_SET, + RAMIPS_GPIO_REG_RESET, + RAMIPS_GPIO_REG_TOGGLE, + RAMIPS_GPIO_REG_MAX +}; + +struct ramips_gpio_chip { + struct gpio_chip chip; + unsigned long map_base; + unsigned long map_size; + u8 regs[RAMIPS_GPIO_REG_MAX]; + + spinlock_t lock; + void __iomem *regs_base; +}; + +struct ramips_gpio_data { + unsigned int num_chips; + struct ramips_gpio_chip *chips; +}; + +int ramips_gpio_init(struct ramips_gpio_data *data); + +#endif /* _RAMIPS_GPIO_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h new file mode 100644 index 0000000..54203db --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h @@ -0,0 +1,23 @@ +/* + * Platform data definition for the built-in NAND controller of the + * Ralink RT305X/RT3662/RT3883 SoCs + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RAMIPS_NAND_PLATFORM_H +#define _RAMIPS_NAND_PLATFORM_H + +#define RAMIPS_NAND_DRIVER_NAME "ramips-nand" + +struct ramips_nand_platform_data { + const char *name; + struct mtd_partition *parts; + int nr_parts; +}; + +#endif /* _RAMIPS_NAND_PLATFORM_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x.h new file mode 100644 index 0000000..10d7263 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x.h @@ -0,0 +1,76 @@ +/* + * Ralink RT288x SoC specific definitions + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT288X_H_ +#define _RT288X_H_ + +#include <linux/init.h> +#include <linux/io.h> + +#define RT288X_MEM_SIZE_MIN (2 * 1024 * 1024) +#define RT288X_MEM_SIZE_MAX (128 * 1024 * 1024) + +#define RT288X_CPU_IRQ_BASE 0 +#define RT288X_INTC_IRQ_BASE 8 +#define RT288X_INTC_IRQ_COUNT 32 +#define RT288X_GPIO_IRQ_BASE 40 + +#define RT288X_CPU_IRQ_INTC (RT288X_CPU_IRQ_BASE + 2) +#define RT288X_CPU_IRQ_PCI (RT288X_CPU_IRQ_BASE + 4) +#define RT288X_CPU_IRQ_FE (RT288X_CPU_IRQ_BASE + 5) +#define RT288X_CPU_IRQ_WNIC (RT288X_CPU_IRQ_BASE + 6) +#define RT288X_CPU_IRQ_COUNTER (RT288X_CPU_IRQ_BASE + 7) + +#define RT2880_INTC_IRQ_TIMER0 (RT288X_INTC_IRQ_BASE + 0) +#define RT2880_INTC_IRQ_TIMER1 (RT288X_INTC_IRQ_BASE + 1) +#define RT2880_INTC_IRQ_UART0 (RT288X_INTC_IRQ_BASE + 2) +#define RT2880_INTC_IRQ_PIO (RT288X_INTC_IRQ_BASE + 3) +#define RT2880_INTC_IRQ_PCM (RT288X_INTC_IRQ_BASE + 4) +#define RT2880_INTC_IRQ_UART1 (RT288X_INTC_IRQ_BASE + 8) +#define RT2880_INTC_IRQ_IA (RT288X_INTC_IRQ_BASE + 23) + +#define RT288X_GPIO_IRQ(x) (RT288X_GPIO_IRQ_BASE + (x)) +#define RT288X_GPIO_COUNT 32 + +extern void __iomem *rt288x_sysc_base; +extern void __iomem *rt288x_memc_base; + +static inline void rt288x_sysc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, rt288x_sysc_base + reg); +} + +static inline u32 rt288x_sysc_rr(unsigned reg) +{ + return __raw_readl(rt288x_sysc_base + reg); +} + +static inline void rt288x_memc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, rt288x_memc_base + reg); +} + +static inline u32 rt288x_memc_rr(unsigned reg) +{ + return __raw_readl(rt288x_memc_base + reg); +} + +void rt288x_gpio_init(u32 mode); + +#ifdef CONFIG_PCI +int rt288x_register_pci(void); +#else +static inline int rt288x_register_pci(void) { return 0; } +#endif /* CONFIG_PCI */ + +#endif /* _RT228X_H_ */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h new file mode 100644 index 0000000..5e27363 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h @@ -0,0 +1,56 @@ +/* + * Ralink RT288x specific CPU feature overrides + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 + +#define cpu_has_prefetch 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 1 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 1 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 + +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#define cpu_dcache_line_size() 16 +#define cpu_icache_line_size() 16 + +#endif /* __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/irq.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/irq.h new file mode 100644 index 0000000..61264f3 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/irq.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#ifndef __ASM_MACH_RALINK_RT288X_IRQ_H +#define __ASM_MACH_RALINK_RT288X_IRQ_H + +#define MIPS_CPU_IRQ_BASE 0 +#define NR_IRQS 48 + +#include_next <irq.h> + +#endif /* __ASM_MACH_RALINK_RT288X_IRQ_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x_regs.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x_regs.h new file mode 100644 index 0000000..b5f4812 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x_regs.h @@ -0,0 +1,127 @@ +/* + * Ralink RT288x SoC register definitions + * + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT288X_REGS_H_ +#define _RT288X_REGS_H_ + +#include <linux/bitops.h> + +#define RT2880_SYSC_BASE 0x00300000 +#define RT2880_TIMER_BASE 0x00300100 +#define RT2880_INTC_BASE 0x00300200 +#define RT2880_MEMC_BASE 0x00300300 +#define RT2880_UART0_BASE 0x00300500 +#define RT2880_PIO_BASE 0x00300600 +#define RT2880_I2C_BASE 0x00300900 +#define RT2880_SPI_BASE 0x00300b00 +#define RT2880_UART1_BASE 0x00300c00 +#define RT2880_FE_BASE 0x00400000 +#define RT2880_ROM_BASE 0x00410000 +#define RT2880_PCM_BASE 0x00420000 +#define RT2880_PCI_BASE 0x00440000 +#define RT2880_WMAC_BASE 0x00480000 +#define RT2880_FLASH1_BASE 0x01000000 +#define RT2880_FLASH0_BASE 0x1dc00000 +#define RT2880_SDRAM_BASE 0x08000000 + +#define RT2880_SYSC_SIZE 0x100 +#define RT2880_TIMER_SIZE 0x100 +#define RT2880_INTC_SIZE 0x100 +#define RT2880_MEMC_SIZE 0x100 +#define RT2880_UART0_SIZE 0x100 +#define RT2880_PIO_SIZE 0x100 +#define RT2880_UART1_SIZE 0x100 +#define RT2880_FLASH1_SIZE (16 * 1024 * 1024) +#define RT2880_FLASH0_SIZE (32 * 1024 * 1024) + +/* SYSC registers */ +#define SYSC_REG_CHIP_NAME0 0x000 /* Chip Name 0 */ +#define SYSC_REG_CHIP_NAME1 0x004 /* Chip Name 1 */ +#define SYSC_REG_CHIP_ID 0x00c /* Chip Identification */ +#define SYSC_REG_SYSTEM_CONFIG 0x010 /* System Configuration */ +#define SYSC_REG_CLKCFG 0x030 +#define SYSC_REG_RESET_CTRL 0x034 /* Reset Control*/ +#define SYSC_REG_RESET_STATUS 0x038 /* Reset Status*/ +#define SYSC_REG_GPIO_MODE 0x060 /* GPIO Purpose Select */ +#define SYSC_REG_IA_ADDRESS 0x310 /* Illegal Access Address */ +#define SYSC_REG_IA_TYPE 0x314 /* Illegal Access Type */ + +#define CHIP_ID_ID_MASK 0xff +#define CHIP_ID_ID_SHIFT 8 +#define CHIP_ID_REV_MASK 0xff + +#define SYSTEM_CONFIG_CPUCLK_SHIFT 20 +#define SYSTEM_CONFIG_CPUCLK_MASK 0x3 +#define SYSTEM_CONFIG_CPUCLK_250 0x0 +#define SYSTEM_CONFIG_CPUCLK_266 0x1 +#define SYSTEM_CONFIG_CPUCLK_280 0x2 +#define SYSTEM_CONFIG_CPUCLK_300 0x3 + +#define CLKCFG_SRAM_CS_N_WDT BIT(9) + +#define RT2880_RESET_SYSTEM BIT(0) +#define RT2880_RESET_TIMER BIT(1) +#define RT2880_RESET_INTC BIT(2) +#define RT2880_RESET_MEMC BIT(3) +#define RT2880_RESET_CPU BIT(4) +#define RT2880_RESET_UART0 BIT(5) +#define RT2880_RESET_PIO BIT(6) +#define RT2880_RESET_I2C BIT(9) +#define RT2880_RESET_SPI BIT(11) +#define RT2880_RESET_UART1 BIT(12) +#define RT2880_RESET_PCI BIT(16) +#define RT2880_RESET_WMAC BIT(17) +#define RT2880_RESET_FE BIT(18) +#define RT2880_RESET_PCM BIT(19) + +#define RT2880_GPIO_MODE_I2C BIT(0) +#define RT2880_GPIO_MODE_UART0 BIT(1) +#define RT2880_GPIO_MODE_SPI BIT(2) +#define RT2880_GPIO_MODE_UART1 BIT(3) +#define RT2880_GPIO_MODE_JTAG BIT(4) +#define RT2880_GPIO_MODE_MDIO BIT(5) +#define RT2880_GPIO_MODE_SDRAM BIT(6) +#define RT2880_GPIO_MODE_PCI BIT(7) + +#define RT2880_INTC_INT_TIMER0 BIT(0) +#define RT2880_INTC_INT_TIMER1 BIT(1) +#define RT2880_INTC_INT_UART0 BIT(2) +#define RT2880_INTC_INT_PIO BIT(3) +#define RT2880_INTC_INT_PCM BIT(4) +#define RT2880_INTC_INT_UART1 BIT(8) +#define RT2880_INTC_INT_IA BIT(23) +#define RT2880_INTC_INT_GLOBAL BIT(31) + +/* MEMC registers */ +#define MEMC_REG_SDRAM_CFG0 0x00 +#define MEMC_REG_SDRAM_CFG1 0x04 +#define MEMC_REG_FLASH_CFG0 0x08 +#define MEMC_REG_FLASH_CFG1 0x0c +#define MEMC_REG_IA_ADDR 0x10 +#define MEMC_REG_IA_TYPE 0x14 + +#define FLASH_CFG_WIDTH_SHIFT 26 +#define FLASH_CFG_WIDTH_MASK 0x3 +#define FLASH_CFG_WIDTH_8BIT 0x0 +#define FLASH_CFG_WIDTH_16BIT 0x1 +#define FLASH_CFG_WIDTH_32BIT 0x2 + +/* UART registers */ +#define UART_REG_RX 0 +#define UART_REG_TX 1 +#define UART_REG_IER 2 +#define UART_REG_IIR 3 +#define UART_REG_FCR 4 +#define UART_REG_LCR 5 +#define UART_REG_MCR 6 +#define UART_REG_LSR 7 + +#endif /* _RT288X_REGS_H_ */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x.h new file mode 100644 index 0000000..c59135c --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x.h @@ -0,0 +1,169 @@ +/* + * Ralink RT305x SoC specific definitions + * + * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT305X_H_ +#define _RT305X_H_ + +#include <linux/init.h> +#include <linux/io.h> + +enum rt305x_soc_type { + RT305X_SOC_UNKNOWN = 0, + RT305X_SOC_RT3050, + RT305X_SOC_RT3052, + RT305X_SOC_RT3350, + RT305X_SOC_RT3352, + RT305X_SOC_RT5350, +}; + +extern enum rt305x_soc_type rt305x_soc; + +static inline int soc_is_rt3050(void) +{ + return rt305x_soc == RT305X_SOC_RT3050; +} + +static inline int soc_is_rt3052(void) +{ + return rt305x_soc == RT305X_SOC_RT3052; +} + +static inline int soc_is_rt305x(void) +{ + return soc_is_rt3050() || soc_is_rt3052(); +} + +static inline int soc_is_rt3350(void) +{ + return rt305x_soc == RT305X_SOC_RT3350; +} + +static inline int soc_is_rt3352(void) +{ + return rt305x_soc == RT305X_SOC_RT3352; +} + +static inline int soc_is_rt5350(void) +{ + return rt305x_soc == RT305X_SOC_RT5350; +} + +#define RT305X_MEM_SIZE_MIN (2 * 1024 * 1024) +#define RT305X_MEM_SIZE_MAX (64 * 1024 * 1024) + +#define RT3352_MEM_SIZE_MIN (2 * 1024 * 1024) +#define RT3352_MEM_SIZE_MAX (256 * 1024 * 1024) + +#define RT305X_CPU_IRQ_BASE 0 +#define RT305X_INTC_IRQ_BASE 8 +#define RT305X_INTC_IRQ_COUNT 32 +#define RT305X_GPIO_IRQ_BASE 40 + +#define RT305X_CPU_IRQ_INTC (RT305X_CPU_IRQ_BASE + 2) +#define RT305X_CPU_IRQ_FE (RT305X_CPU_IRQ_BASE + 5) +#define RT305X_CPU_IRQ_WNIC (RT305X_CPU_IRQ_BASE + 6) +#define RT305X_CPU_IRQ_COUNTER (RT305X_CPU_IRQ_BASE + 7) + +#define RT305X_INTC_IRQ_SYSCTL (RT305X_INTC_IRQ_BASE + 0) +#define RT305X_INTC_IRQ_TIMER0 (RT305X_INTC_IRQ_BASE + 1) +#define RT305X_INTC_IRQ_TIMER1 (RT305X_INTC_IRQ_BASE + 2) +#define RT305X_INTC_IRQ_IA (RT305X_INTC_IRQ_BASE + 3) +#define RT305X_INTC_IRQ_PCM (RT305X_INTC_IRQ_BASE + 4) +#define RT305X_INTC_IRQ_UART0 (RT305X_INTC_IRQ_BASE + 5) +#define RT305X_INTC_IRQ_PIO (RT305X_INTC_IRQ_BASE + 6) +#define RT305X_INTC_IRQ_DMA (RT305X_INTC_IRQ_BASE + 7) +#define RT305X_INTC_IRQ_NAND (RT305X_INTC_IRQ_BASE + 8) +#define RT305X_INTC_IRQ_PERFC (RT305X_INTC_IRQ_BASE + 9) +#define RT305X_INTC_IRQ_I2S (RT305X_INTC_IRQ_BASE + 10) +#define RT305X_INTC_IRQ_UART1 (RT305X_INTC_IRQ_BASE + 12) +#define RT305X_INTC_IRQ_ESW (RT305X_INTC_IRQ_BASE + 17) +#define RT305X_INTC_IRQ_OTG (RT305X_INTC_IRQ_BASE + 18) + +extern void __iomem *rt305x_sysc_base; +extern void __iomem *rt305x_memc_base; + +static inline void rt305x_sysc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, rt305x_sysc_base + reg); +} + +static inline u32 rt305x_sysc_rr(unsigned reg) +{ + return __raw_readl(rt305x_sysc_base + reg); +} + +static inline void rt305x_memc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, rt305x_memc_base + reg); +} + +static inline u32 rt305x_memc_rr(unsigned reg) +{ + return __raw_readl(rt305x_memc_base + reg); +} + +#define RT305X_GPIO_I2C_SD 1 +#define RT305X_GPIO_I2C_SCLK 2 +#define RT305X_GPIO_SPI_EN 3 +#define RT305X_GPIO_SPI_CLK 4 +#define RT305X_GPIO_SPI_DOUT 5 +#define RT305X_GPIO_SPI_DIN 6 +/* GPIO 7-14 is shared between UART0, PCM and I2S interfaces */ +#define RT305X_GPIO_7 7 +#define RT305X_GPIO_8 8 +#define RT305X_GPIO_9 9 +#define RT305X_GPIO_10 10 +#define RT305X_GPIO_11 11 +#define RT305X_GPIO_12 12 +#define RT305X_GPIO_13 13 +#define RT305X_GPIO_14 14 +#define RT305X_GPIO_UART1_TXD 15 +#define RT305X_GPIO_UART1_RXD 16 +#define RT305X_GPIO_JTAG_TDO 17 +#define RT305X_GPIO_JTAG_TDI 18 +#define RT305X_GPIO_JTAG_TMS 19 +#define RT305X_GPIO_JTAG_TCLK 20 +#define RT305X_GPIO_JTAG_TRST_N 21 +#define RT305X_GPIO_MDIO_MDC 22 +#define RT305X_GPIO_MDIO_MDIO 23 +#define RT305X_GPIO_SDRAM_MD16 24 +#define RT305X_GPIO_SDRAM_MD17 25 +#define RT305X_GPIO_SDRAM_MD18 26 +#define RT305X_GPIO_SDRAM_MD19 27 +#define RT305X_GPIO_SDRAM_MD20 28 +#define RT305X_GPIO_SDRAM_MD21 29 +#define RT305X_GPIO_SDRAM_MD22 30 +#define RT305X_GPIO_SDRAM_MD23 31 +#define RT305X_GPIO_SDRAM_MD24 32 +#define RT305X_GPIO_SDRAM_MD25 33 +#define RT305X_GPIO_SDRAM_MD26 34 +#define RT305X_GPIO_SDRAM_MD27 35 +#define RT305X_GPIO_SDRAM_MD28 36 +#define RT305X_GPIO_SDRAM_MD29 37 +#define RT305X_GPIO_SDRAM_MD30 38 +#define RT305X_GPIO_SDRAM_MD31 39 +#define RT305X_GPIO_GE0_TXD0 40 +#define RT305X_GPIO_GE0_TXD1 41 +#define RT305X_GPIO_GE0_TXD2 42 +#define RT305X_GPIO_GE0_TXD3 43 +#define RT305X_GPIO_GE0_TXEN 44 +#define RT305X_GPIO_GE0_TXCLK 45 +#define RT305X_GPIO_GE0_RXD0 46 +#define RT305X_GPIO_GE0_RXD1 47 +#define RT305X_GPIO_GE0_RXD2 48 +#define RT305X_GPIO_GE0_RXD3 49 +#define RT305X_GPIO_GE0_RXDV 50 +#define RT305X_GPIO_GE0_RXCLK 51 + +void rt305x_gpio_init(u32 mode); + +#endif /* _RT305X_H_ */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h new file mode 100644 index 0000000..8c12611 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h @@ -0,0 +1,56 @@ +/* + * Ralink RT305x specific CPU feature overrides + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 + +#define cpu_has_prefetch 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 1 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 1 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 1 +#define cpu_has_mipsmt 0 + +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 + +#endif /* __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/irq.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/irq.h new file mode 100644 index 0000000..a72d677 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/irq.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#ifndef __ASM_MACH_RALINK_RT305X_IRQ_H +#define __ASM_MACH_RALINK_RT305X_IRQ_H + +#define MIPS_CPU_IRQ_BASE 0 +#define NR_IRQS 48 + +#include_next <irq.h> + +#endif /* __ASM_MACH_RALINK_RT305X_IRQ_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h new file mode 100644 index 0000000..2098c5c --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h @@ -0,0 +1,27 @@ +/* + * Ralink RT305x SoC platform device registration + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT305X_ESW_PLATFORM_H +#define _RT305X_ESW_PLATFORM_H + +enum { + RT305X_ESW_VLAN_CONFIG_NONE = 0, + RT305X_ESW_VLAN_CONFIG_LLLLW, + RT305X_ESW_VLAN_CONFIG_WLLLL, +}; + +struct rt305x_esw_platform_data +{ + u8 vlan_config; + u32 reg_initval_fct2; + u32 reg_initval_fpa2; +}; + +#endif /* _RT305X_ESW_PLATFORM_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_regs.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_regs.h new file mode 100644 index 0000000..943facb --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_regs.h @@ -0,0 +1,216 @@ +/* + * Ralink RT305 SoC register definitions + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT305X_REGS_H_ +#define _RT305X_REGS_H_ + +#include <linux/bitops.h> + +#define RT305X_SDRAM_BASE 0x00000000 +#define RT305X_SYSC_BASE 0x10000000 +#define RT305X_TIMER_BASE 0x10000100 +#define RT305X_INTC_BASE 0x10000200 +#define RT305X_MEMC_BASE 0x10000300 +#define RT305X_PCM_BASE 0x10000400 +#define RT305X_UART0_BASE 0x10000500 +#define RT305X_PIO_BASE 0x10000600 +#define RT305X_GDMA_BASE 0x10000700 +#define RT305X_NANDC_BASE 0x10000800 +#define RT305X_I2C_BASE 0x10000900 +#define RT305X_I2S_BASE 0x10000a00 +#define RT305X_SPI_BASE 0x10000b00 +#define RT305X_UART1_BASE 0x10000c00 +#define RT305X_FE_BASE 0x10100000 +#define RT305X_SWITCH_BASE 0x10110000 +#define RT305X_WMAC_BASE 0x10180000 +#define RT305X_OTG_BASE 0x101c0000 +#define RT305X_ROM_BASE 0x00400000 +#define RT305X_FLASH1_BASE 0x1b000000 +#define RT305X_FLASH0_BASE 0x1f000000 + +#define RT305X_SYSC_SIZE 0x100 +#define RT305X_TIMER_SIZE 0x100 +#define RT305X_INTC_SIZE 0x100 +#define RT305X_MEMC_SIZE 0x100 +#define RT305X_UART0_SIZE 0x100 +#define RT305X_PIO_SIZE 0x100 +#define RT305X_UART1_SIZE 0x100 +#define RT305X_SPI_SIZE 0x100 +#define RT305X_FLASH1_SIZE (16 * 1024 * 1024) +#define RT305X_FLASH0_SIZE (8 * 1024 * 1024) + +#define RT3352_EHCI_BASE 0x101c0000 +#define RT3352_EHCI_SIZE 0x1000 +#define RT3352_OHCI_BASE 0x101c1000 +#define RT3352_OHCI_SIZE 0x1000 + +/* SYSC registers */ +#define SYSC_REG_CHIP_NAME0 0x000 /* Chip Name 0 */ +#define SYSC_REG_CHIP_NAME1 0x004 /* Chip Name 1 */ +#define SYSC_REG_CHIP_ID 0x00c /* Chip Identification */ +#define SYSC_REG_SYSTEM_CONFIG 0x010 /* System Configuration */ +#define SYSC_REG_RESET_CTRL 0x034 /* Reset Control*/ +#define SYSC_REG_RESET_STATUS 0x038 /* Reset Status*/ +#define SYSC_REG_GPIO_MODE 0x060 /* GPIO Purpose Select */ +#define SYSC_REG_IA_ADDRESS 0x310 /* Illegal Access Address */ +#define SYSC_REG_IA_TYPE 0x314 /* Illegal Access Type */ + +#define RT3352_SYSC_REG_SYSCFG1 0x014 +#define RT3352_SYSC_REG_CLKCFG1 0x030 +#define RT3352_SYSC_REG_RSTCTRL 0x034 +#define RT3352_SYSC_REG_USB_PS 0x05c + +#define RT3052_CHIP_NAME0 0x30335452 +#define RT3052_CHIP_NAME1 0x20203235 + +#define RT3350_CHIP_NAME0 0x33335452 +#define RT3350_CHIP_NAME1 0x20203035 + +#define RT3352_CHIP_NAME0 0x33335452 +#define RT3352_CHIP_NAME1 0x20203235 + +#define RT5350_CHIP_NAME0 0x33355452 +#define RT5350_CHIP_NAME1 0x20203035 + +#define CHIP_ID_ID_MASK 0xff +#define CHIP_ID_ID_SHIFT 8 +#define CHIP_ID_REV_MASK 0xff + +#define RT305X_SYSCFG_CPUCLK_SHIFT 18 +#define RT305X_SYSCFG_CPUCLK_MASK 0x1 +#define RT305X_SYSCFG_CPUCLK_LOW 0x0 +#define RT305X_SYSCFG_CPUCLK_HIGH 0x1 +#define RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT 2 +#define RT305X_SYSCFG_SRAM_CS0_MODE_MASK 0x3 +#define RT305X_SYSCFG_SRAM_CS0_MODE_NORMAL 0 +#define RT305X_SYSCFG_SRAM_CS0_MODE_WDT 1 +#define RT305X_SYSCFG_SRAM_CS0_MODE_BTCOEX 2 + +#define RT3352_SYSCFG0_CPUCLK_SHIFT 8 +#define RT3352_SYSCFG0_CPUCLK_MASK 0x1 +#define RT3352_SYSCFG0_CPUCLK_LOW 0x0 +#define RT3352_SYSCFG0_CPUCLK_HIGH 0x1 + +#define RT5350_SYSCFG0_CPUCLK_SHIFT 8 +#define RT5350_SYSCFG0_CPUCLK_MASK 0x3 +#define RT5350_SYSCFG0_CPUCLK_360 0x0 +#define RT5350_SYSCFG0_CPUCLK_320 0x2 +#define RT5350_SYSCFG0_CPUCLK_300 0x3 +#define RT5350_SYSCFG0_DRAM_SIZE_SHIFT 12 +#define RT5350_SYSCFG0_DRAM_SIZE_MASK 7 +#define RT5350_SYSCFG0_DRAM_SIZE_2M 0 +#define RT5350_SYSCFG0_DRAM_SIZE_8M 1 +#define RT5350_SYSCFG0_DRAM_SIZE_16M 2 +#define RT5350_SYSCFG0_DRAM_SIZE_32M 3 +#define RT5350_SYSCFG0_DRAM_SIZE_64M 4 + +#define RT3352_SYSCFG0_XTAL_SEL BIT(20) + +#define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10) + +#define RT3352_CLKCFG1_UPHY0_CLK_EN BIT(18) +#define RT3352_CLKCFG1_UPHY1_CLK_EN BIT(20) + +#define RT305X_GPIO_MODE_I2C BIT(0) +#define RT305X_GPIO_MODE_SPI BIT(1) +#define RT305X_GPIO_MODE_UART0_SHIFT 2 +#define RT305X_GPIO_MODE_UART0_MASK 0x7 +#define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT) +#define RT305X_GPIO_MODE_UARTF 0x0 +#define RT305X_GPIO_MODE_PCM_UARTF 0x1 +#define RT305X_GPIO_MODE_PCM_I2S 0x2 +#define RT305X_GPIO_MODE_I2S_UARTF 0x3 +#define RT305X_GPIO_MODE_PCM_GPIO 0x4 +#define RT305X_GPIO_MODE_GPIO_UARTF 0x5 +#define RT305X_GPIO_MODE_GPIO_I2S 0x6 +#define RT305X_GPIO_MODE_GPIO 0x7 +#define RT305X_GPIO_MODE_UART1 BIT(5) +#define RT305X_GPIO_MODE_JTAG BIT(6) +#define RT305X_GPIO_MODE_MDIO BIT(7) +#define RT305X_GPIO_MODE_SDRAM BIT(8) +#define RT305X_GPIO_MODE_RGMII BIT(9) + +#define RT305X_RESET_SYSTEM BIT(0) +#define RT305X_RESET_TIMER BIT(8) +#define RT305X_RESET_INTC BIT(9) +#define RT305X_RESET_MEMC BIT(10) +#define RT305X_RESET_PCM BIT(11) +#define RT305X_RESET_UART0 BIT(12) +#define RT305X_RESET_PIO BIT(13) +#define RT305X_RESET_DMA BIT(14) +#define RT305X_RESET_I2C BIT(16) +#define RT305X_RESET_I2S BIT(17) +#define RT305X_RESET_SPI BIT(18) +#define RT305X_RESET_UART1 BIT(19) +#define RT305X_RESET_WNIC BIT(20) +#define RT305X_RESET_FE BIT(21) +#define RT305X_RESET_OTG BIT(22) +#define RT305X_RESET_ESW BIT(23) + +#define RT3352_RSTCTRL_SYS BIT(0) +#define RT3352_RSTCTRL_TIMER BIT(8) +#define RT3352_RSTCTRL_INTC BIT(9) +#define RT3352_RSTCTRL_MEMC BIT(10) +#define RT3352_RSTCTRL_PCM BIT(11) +#define RT3352_RSTCTRL_UART0 BIT(12) +#define RT3352_RSTCTRL_PIO BIT(13) +#define RT3352_RSTCTRL_DMA BIT(14) +#define RT3352_RSTCTRL_I2C BIT(16) +#define RT3352_RSTCTRL_I2S BIT(17) +#define RT3352_RSTCTRL_SPI BIT(18) +#define RT3352_RSTCTRL_UART1 BIT(19) +#define RT3352_RSTCTRL_WNIC BIT(20) +#define RT3352_RSTCTRL_FE BIT(21) +#define RT3352_RSTCTRL_UHST BIT(22) +#define RT3352_RSTCTRL_ESW BIT(23) +#define RT3352_RSTCTRL_EPHY BIT(24) +#define RT3352_RSTCTRL_UDEV BIT(25) + +#define RT305X_INTC_INT_SYSCTL BIT(0) +#define RT305X_INTC_INT_TIMER0 BIT(1) +#define RT305X_INTC_INT_TIMER1 BIT(2) +#define RT305X_INTC_INT_IA BIT(3) +#define RT305X_INTC_INT_PCM BIT(4) +#define RT305X_INTC_INT_UART0 BIT(5) +#define RT305X_INTC_INT_PIO BIT(6) +#define RT305X_INTC_INT_DMA BIT(7) +#define RT305X_INTC_INT_NAND BIT(8) +#define RT305X_INTC_INT_PERFC BIT(9) +#define RT305X_INTC_INT_I2S BIT(10) +#define RT305X_INTC_INT_UART1 BIT(12) +#define RT305X_INTC_INT_ESW BIT(17) +#define RT305X_INTC_INT_OTG BIT(18) +#define RT305X_INTC_INT_GLOBAL BIT(31) + +/* MEMC registers */ +#define MEMC_REG_SDRAM_CFG0 0x00 +#define MEMC_REG_SDRAM_CFG1 0x04 +#define MEMC_REG_FLASH_CFG0 0x08 +#define MEMC_REG_FLASH_CFG1 0x0c +#define MEMC_REG_IA_ADDR 0x10 +#define MEMC_REG_IA_TYPE 0x14 + +#define FLASH_CFG_WIDTH_SHIFT 26 +#define FLASH_CFG_WIDTH_MASK 0x3 +#define FLASH_CFG_WIDTH_8BIT 0x0 +#define FLASH_CFG_WIDTH_16BIT 0x1 +#define FLASH_CFG_WIDTH_32BIT 0x2 + +/* UART registers */ +#define UART_REG_RX 0 +#define UART_REG_TX 1 +#define UART_REG_IER 2 +#define UART_REG_IIR 3 +#define UART_REG_FCR 4 +#define UART_REG_LCR 5 +#define UART_REG_MCR 6 +#define UART_REG_LSR 7 + +#endif /* _RT305X_REGS_H_ */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883.h new file mode 100644 index 0000000..cf8fb6f --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883.h @@ -0,0 +1,152 @@ +/* + * Ralink RT3662/RT3883 SoC specific definitions + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_H_ +#define _RT3883_H_ + +#include <linux/init.h> +#include <linux/io.h> + +#define RT3883_MEM_SIZE_MIN (2 * 1024 * 1024) +#define RT3883_MEM_SIZE_MAX (256 * 1024 * 1024) + +#define RT3883_CPU_IRQ_BASE 0 +#define RT3883_CPU_IRQ_COUNT 8 +#define RT3883_INTC_IRQ_BASE (RT3883_CPU_IRQ_BASE + RT3883_CPU_IRQ_COUNT) +#define RT3883_INTC_IRQ_COUNT 32 +#define RT3883_GPIO_IRQ_BASE (RT3883_INTC_IRQ_BASE + RT3883_INTC_IRQ_COUNT) +#define RT3883_GPIO_IRQ_COUNT 96 +#define RT3883_PCI_IRQ_BASE (RT3883_GPIO_IRQ_BASE + RT3883_GPIO_IRQ_COUNT) +#define RT3883_PCI_IRQ_COUNT 3 + +#define RT3883_CPU_IRQ_INTC (RT3883_CPU_IRQ_BASE + 2) +#define RT3883_CPU_IRQ_PCI (RT3883_CPU_IRQ_BASE + 4) +#define RT3883_CPU_IRQ_FE (RT3883_CPU_IRQ_BASE + 5) +#define RT3883_CPU_IRQ_WLAN (RT3883_CPU_IRQ_BASE + 6) +#define RT3883_CPU_IRQ_COUNTER (RT3883_CPU_IRQ_BASE + 7) + +#define RT3883_INTC_IRQ_SYSCTL (RT3883_INTC_IRQ_BASE + 0) +#define RT3883_INTC_IRQ_TIMER0 (RT3883_INTC_IRQ_BASE + 1) +#define RT3883_INTC_IRQ_TIMER1 (RT3883_INTC_IRQ_BASE + 2) +#define RT3883_INTC_IRQ_IA (RT3883_INTC_IRQ_BASE + 3) +#define RT3883_INTC_IRQ_PCM (RT3883_INTC_IRQ_BASE + 4) +#define RT3883_INTC_IRQ_UART0 (RT3883_INTC_IRQ_BASE + 5) +#define RT3883_INTC_IRQ_PIO (RT3883_INTC_IRQ_BASE + 6) +#define RT3883_INTC_IRQ_DMA (RT3883_INTC_IRQ_BASE + 7) +#define RT3883_INTC_IRQ_NAND (RT3883_INTC_IRQ_BASE + 8) +#define RT3883_INTC_IRQ_PERFC (RT3883_INTC_IRQ_BASE + 9) +#define RT3883_INTC_IRQ_I2S (RT3883_INTC_IRQ_BASE + 10) +#define RT3883_INTC_IRQ_UART1 (RT3883_INTC_IRQ_BASE + 12) +#define RT3883_INTC_IRQ_UHST (RT3883_INTC_IRQ_BASE + 18) +#define RT3883_INTC_IRQ_UDEV (RT3883_INTC_IRQ_BASE + 19) + +#define RT3883_PCI_IRQ_PCI0 (RT3883_PCI_IRQ_BASE + 0) +#define RT3883_PCI_IRQ_PCI1 (RT3883_PCI_IRQ_BASE + 1) +#define RT3883_PCI_IRQ_PCIE (RT3883_PCI_IRQ_BASE + 2) + +extern void __iomem *rt3883_sysc_base; +extern void __iomem *rt3883_memc_base; + +static inline void rt3883_sysc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, rt3883_sysc_base + reg); +} + +static inline u32 rt3883_sysc_rr(unsigned reg) +{ + return __raw_readl(rt3883_sysc_base + reg); +} + +static inline void rt3883_memc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, rt3883_memc_base + reg); +} + +static inline u32 rt3883_memc_rr(unsigned reg) +{ + return __raw_readl(rt3883_memc_base + reg); +} + +#define RT3883_GPIO_I2C_SD 1 +#define RT3883_GPIO_I2C_SCLK 2 +#define RT3883_GPIO_SPI_CS0 3 +#define RT3883_GPIO_SPI_CLK 4 +#define RT3883_GPIO_SPI_MOSI 5 +#define RT3883_GPIO_SPI_MISO 6 +/* GPIO 7-14 is shared between UART0, PCM and I2S interfaces */ +#define RT3883_GPIO_7 7 +#define RT3883_GPIO_8 8 +#define RT3883_GPIO_9 9 +#define RT3883_GPIO_10 10 +#define RT3883_GPIO_11 11 +#define RT3883_GPIO_12 12 +#define RT3883_GPIO_13 13 +#define RT3883_GPIO_14 14 +#define RT3883_GPIO_UART1_TXD 15 +#define RT3883_GPIO_UART1_RXD 16 +#define RT3883_GPIO_JTAG_TDO 17 +#define RT3883_GPIO_JTAG_TDI 18 +#define RT3883_GPIO_JTAG_TMS 19 +#define RT3883_GPIO_JTAG_TCLK 20 +#define RT3883_GPIO_JTAG_TRST_N 21 +#define RT3883_GPIO_MDIO_MDC 22 +#define RT3883_GPIO_MDIO_MDIO 23 +#define RT3883_GPIO_LNA_PE_A0 32 +#define RT3883_GPIO_LNA_PE_A1 33 +#define RT3883_GPIO_LNA_PE_A2 34 +#define RT3883_GPIO_LNA_PE_G0 35 +#define RT3883_GPIO_LNA_PE_G1 36 +#define RT3883_GPIO_LNA_PE_G2 37 +#define RT3883_GPIO_PCI_AD0 40 +#define RT3883_GPIO_PCI_AD31 71 +#define RT3883_GPIO_GE2_TXD0 72 +#define RT3883_GPIO_GE2_TXD1 73 +#define RT3883_GPIO_GE2_TXD2 74 +#define RT3883_GPIO_GE2_TXD3 75 +#define RT3883_GPIO_GE2_TXEN 76 +#define RT3883_GPIO_GE2_TXCLK 77 +#define RT3883_GPIO_GE2_RXD0 78 +#define RT3883_GPIO_GE2_RXD1 79 +#define RT3883_GPIO_GE2_RXD2 80 +#define RT3883_GPIO_GE2_RXD3 81 +#define RT3883_GPIO_GE2_RXDV 82 +#define RT3883_GPIO_GE2_RXCLK 83 +#define RT3883_GPIO_GE1_TXD0 84 +#define RT3883_GPIO_GE1_TXD1 85 +#define RT3883_GPIO_GE1_TXD2 86 +#define RT3883_GPIO_GE1_TXD3 87 +#define RT3883_GPIO_GE1_TXEN 88 +#define RT3883_GPIO_GE1_TXCLK 89 +#define RT3883_GPIO_GE1_RXD0 90 +#define RT3883_GPIO_GE1_RXD1 91 +#define RT3883_GPIO_GE1_RXD2 92 +#define RT3883_GPIO_GE1_RXD3 93 +#define RT3883_GPIO_GE1_RXDV 94 +#define RT3883_GPIO_GE1_RXCLK 95 + +void rt3883_gpio_init(u32 mode); + +#define RT3883_PCI_MODE_PCI 0x01 +#define RT3883_PCI_MODE_PCIE 0x02 +#define RT3883_PCI_MODE_BOTH (RT3883_PCI_MODE_PCI | RT3883_PCI_MODE_PCIE) + +struct pci_dev; + +#ifdef CONFIG_PCI +void rt3883_pci_init(unsigned mode); +void rt3883_pci_set_plat_dev_init(int (*f)(struct pci_dev *)); +#else +static inline void rt3883_pci_init(unsigned mode) {} +static inline void rt3883_pci_set_plat_dev_init(int (*f)(struct pci_dev *)) {} +#endif /* CONFIG_PCI */ + +#endif /* _RT3883_H_ */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h new file mode 100644 index 0000000..ac435dd --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h @@ -0,0 +1,55 @@ +/* + * Ralink RT3662/RT3883 specific CPU feature overrides + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 + +#define cpu_has_prefetch 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 1 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 1 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 1 +#define cpu_has_mipsmt 0 + +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 + +#endif /* __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/irq.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/irq.h new file mode 100644 index 0000000..635d68c --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/irq.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#ifndef __ASM_MACH_RALINK_RT3883_IRQ_H +#define __ASM_MACH_RALINK_RT3883_IRQ_H + +#define MIPS_CPU_IRQ_BASE 0 +#define NR_IRQS 140 + +#include_next <irq.h> + +#endif /* __ASM_MACH_RALINK_RT3883_IRQ_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883_regs.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883_regs.h new file mode 100644 index 0000000..b36cabe --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883_regs.h @@ -0,0 +1,207 @@ +/* + * Ralink RT3662/RT3883 SoC register definitions + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_REGS_H_ +#define _RT3883_REGS_H_ + +#include <linux/bitops.h> + +#define RT3883_SDRAM_BASE 0x00000000 +#define RT3883_SYSC_BASE 0x10000000 +#define RT3883_TIMER_BASE 0x10000100 +#define RT3883_INTC_BASE 0x10000200 +#define RT3883_MEMC_BASE 0x10000300 +#define RT3883_UART0_BASE 0x10000500 +#define RT3883_PIO_BASE 0x10000600 +#define RT3883_FSCC_BASE 0x10000700 +#define RT3883_NANDC_BASE 0x10000810 +#define RT3883_I2C_BASE 0x10000900 +#define RT3883_I2S_BASE 0x10000a00 +#define RT3883_SPI_BASE 0x10000b00 +#define RT3883_UART1_BASE 0x10000c00 +#define RT3883_PCM_BASE 0x10002000 +#define RT3883_GDMA_BASE 0x10002800 +#define RT3883_CODEC1_BASE 0x10003000 +#define RT3883_CODEC2_BASE 0x10003800 +#define RT3883_FE_BASE 0x10100000 +#define RT3883_ROM_BASE 0x10118000 +#define RT3883_USBDEV_BASE 0x10112000 +#define RT3883_PCI_BASE 0x10140000 +#define RT3883_WLAN_BASE 0x10180000 +#define RT3883_USBHOST_BASE 0x101c0000 +#define RT3883_BOOT_BASE 0x1c000000 +#define RT3883_SRAM_BASE 0x1e000000 +#define RT3883_PCIMEM_BASE 0x20000000 + +#define RT3883_EHCI_BASE (RT3883_USBHOST_BASE) +#define RT3883_OHCI_BASE (RT3883_USBHOST_BASE + 0x1000) + +#define RT3883_SYSC_SIZE 0x100 +#define RT3883_TIMER_SIZE 0x100 +#define RT3883_INTC_SIZE 0x100 +#define RT3883_MEMC_SIZE 0x100 +#define RT3883_UART0_SIZE 0x100 +#define RT3883_UART1_SIZE 0x100 +#define RT3883_PIO_SIZE 0x100 +#define RT3883_FSCC_SIZE 0x100 +#define RT3883_NANDC_SIZE 0x0f0 +#define RT3883_I2C_SIZE 0x100 +#define RT3883_I2S_SIZE 0x100 +#define RT3883_SPI_SIZE 0x100 +#define RT3883_PCM_SIZE 0x800 +#define RT3883_GDMA_SIZE 0x800 +#define RT3883_CODEC1_SIZE 0x800 +#define RT3883_CODEC2_SIZE 0x800 +#define RT3883_FE_SIZE 0x10000 +#define RT3883_ROM_SIZE 0x4000 +#define RT3883_USBDEV_SIZE 0x4000 +#define RT3883_PCI_SIZE 0x40000 +#define RT3883_WLAN_SIZE 0x40000 +#define RT3883_USBHOST_SIZE 0x40000 +#define RT3883_BOOT_SIZE (32 * 1024 * 1024) +#define RT3883_SRAM_SIZE (32 * 1024 * 1024) + +/* SYSC registers */ +#define RT3883_SYSC_REG_CHIPID0_3 0x00 /* Chip ID 0 */ +#define RT3883_SYSC_REG_CHIPID4_7 0x04 /* Chip ID 1 */ +#define RT3883_SYSC_REG_REVID 0x0c /* Chip Revision Identification */ +#define RT3883_SYSC_REG_SYSCFG0 0x10 /* System Configuration 0 */ +#define RT3883_SYSC_REG_SYSCFG1 0x14 /* System Configuration 1 */ +#define RT3883_SYSC_REG_CLKCFG0 0x2c /* Clock Configuration 0 */ +#define RT3883_SYSC_REG_CLKCFG1 0x30 /* Clock Configuration 1 */ +#define RT3883_SYSC_REG_RSTCTRL 0x34 /* Reset Control*/ +#define RT3883_SYSC_REG_RSTSTAT 0x38 /* Reset Status*/ +#define RT3883_SYSC_REG_USB_PS 0x5c /* USB Power saving control */ +#define RT3883_SYSC_REG_GPIO_MODE 0x60 /* GPIO Purpose Select */ +#define RT3883_SYSC_REG_PCIE_CLK_GEN0 0x7c +#define RT3883_SYSC_REG_PCIE_CLK_GEN1 0x80 +#define RT3883_SYSC_REG_PCIE_CLK_GEN2 0x84 +#define RT3883_SYSC_REG_PMU 0x88 +#define RT3883_SYSC_REG_PMU1 0x8c + +#define RT3883_REVID_VER_ID_MASK 0x0f +#define RT3883_REVID_VER_ID_SHIFT 8 +#define RT3883_REVID_ECO_ID_MASK 0x0f + +#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17) +#define RT3883_SYSCFG0_CPUCLK_SHIFT 8 +#define RT3883_SYSCFG0_CPUCLK_MASK 0x3 +#define RT3883_SYSCFG0_CPUCLK_250 0x0 +#define RT3883_SYSCFG0_CPUCLK_384 0x1 +#define RT3883_SYSCFG0_CPUCLK_480 0x2 +#define RT3883_SYSCFG0_CPUCLK_500 0x3 + +#define RT3883_SYSCFG1_USB0_HOST_MODE BIT(10) +#define RT3883_SYSCFG1_PCIE_RC_MODE BIT(8) +#define RT3883_SYSCFG1_PCI_HOST_MODE BIT(7) +#define RT3883_SYSCFG1_PCI_66M_MODE BIT(6) +#define RT3883_SYSCFG1_GPIO2_AS_WDT_OUT BIT(2) + +#define RT3883_CLKCFG1_PCIE_CLK_EN BIT(21) +#define RT3883_CLKCFG1_UPHY1_CLK_EN BIT(20) +#define RT3883_CLKCFG1_PCI_CLK_EN BIT(19) +#define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18) + +#define RT3883_GPIO_MODE_I2C BIT(0) +#define RT3883_GPIO_MODE_SPI BIT(1) +#define RT3883_GPIO_MODE_UART0_SHIFT 2 +#define RT3883_GPIO_MODE_UART0_MASK 0x7 +#define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT) +#define RT3883_GPIO_MODE_UARTF 0x0 +#define RT3883_GPIO_MODE_PCM_UARTF 0x1 +#define RT3883_GPIO_MODE_PCM_I2S 0x2 +#define RT3883_GPIO_MODE_I2S_UARTF 0x3 +#define RT3883_GPIO_MODE_PCM_GPIO 0x4 +#define RT3883_GPIO_MODE_GPIO_UARTF 0x5 +#define RT3883_GPIO_MODE_GPIO_I2S 0x6 +#define RT3883_GPIO_MODE_GPIO 0x7 +#define RT3883_GPIO_MODE_UART1 BIT(5) +#define RT3883_GPIO_MODE_JTAG BIT(6) +#define RT3883_GPIO_MODE_MDIO BIT(7) +#define RT3883_GPIO_MODE_GE1 BIT(9) +#define RT3883_GPIO_MODE_GE2 BIT(10) +#define RT3883_GPIO_MODE_PCI_SHIFT 11 +#define RT3883_GPIO_MODE_PCI_MASK 0x7 +#define RT3883_GPIO_MODE_PCI(_x) ((_x) << RT3883_GPIO_MODE_PCI_SHIFT) +#define RT3883_GPIO_MODE_PCI_DEV 0 +#define RT3883_GPIO_MODE_PCI_HOST2 1 +#define RT3883_GPIO_MODE_PCI_HOST1 2 +#define RT3883_GPIO_MODE_PCI_FNC 3 +#define RT3883_GPIO_MODE_PCI_GPIO 7 +#define RT3883_GPIO_MODE_LNA_A_SHIFT 16 +#define RT3883_GPIO_MODE_LNA_A_MASK 0x3 +#define RT3883_GPIO_MODE_LNA_A(_x) ((_x) << RT3883_GPIO_MODE_LNA_A_SHIFT) +#define RT3883_GPIO_MODE_LNA_A_GPIO 0x3 +#define RT3883_GPIO_MODE_LNA_G_SHIFT 18 +#define RT3883_GPIO_MODE_LNA_G_MASK 0x3 +#define RT3883_GPIO_MODE_LNA_G(_x) ((_x) << RT3883_GPIO_MODE_LNA_G_SHIFT) +#define RT3883_GPIO_MODE_LNA_G_GPIO 0x3 + +#define RT3883_RSTCTRL_PCIE_PCI_PDM BIT(27) +#define RT3883_RSTCTRL_FLASH BIT(26) +#define RT3883_RSTCTRL_UDEV BIT(25) +#define RT3883_RSTCTRL_PCI BIT(24) +#define RT3883_RSTCTRL_PCIE BIT(23) +#define RT3883_RSTCTRL_UHST BIT(22) +#define RT3883_RSTCTRL_FE BIT(21) +#define RT3883_RSTCTRL_WLAN BIT(20) +#define RT3883_RSTCTRL_UART1 BIT(29) +#define RT3883_RSTCTRL_SPI BIT(18) +#define RT3883_RSTCTRL_I2S BIT(17) +#define RT3883_RSTCTRL_I2C BIT(16) +#define RT3883_RSTCTRL_NAND BIT(15) +#define RT3883_RSTCTRL_DMA BIT(14) +#define RT3883_RSTCTRL_PIO BIT(13) +#define RT3883_RSTCTRL_UART BIT(12) +#define RT3883_RSTCTRL_PCM BIT(11) +#define RT3883_RSTCTRL_MC BIT(10) +#define RT3883_RSTCTRL_INTC BIT(9) +#define RT3883_RSTCTRL_TIMER BIT(8) +#define RT3883_RSTCTRL_SYS BIT(0) + +#define RT3883_INTC_INT_SYSCTL BIT(0) +#define RT3883_INTC_INT_TIMER0 BIT(1) +#define RT3883_INTC_INT_TIMER1 BIT(2) +#define RT3883_INTC_INT_IA BIT(3) +#define RT3883_INTC_INT_PCM BIT(4) +#define RT3883_INTC_INT_UART0 BIT(5) +#define RT3883_INTC_INT_PIO BIT(6) +#define RT3883_INTC_INT_DMA BIT(7) +#define RT3883_INTC_INT_NAND BIT(8) +#define RT3883_INTC_INT_PERFC BIT(9) +#define RT3883_INTC_INT_I2S BIT(10) +#define RT3883_INTC_INT_UART1 BIT(12) +#define RT3883_INTC_INT_UHST BIT(18) +#define RT3883_INTC_INT_UDEV BIT(19) + +/* FLASH/SRAM/Codec Controller registers */ +#define RT3883_FSCC_REG_FLASH_CFG0 0x00 +#define RT3883_FSCC_REG_FLASH_CFG1 0x04 +#define RT3883_FSCC_REG_CODEC_CFG0 0x40 +#define RT3883_FSCC_REG_CODEC_CFG1 0x44 + +#define RT3883_FLASH_CFG_WIDTH_SHIFT 26 +#define RT3883_FLASH_CFG_WIDTH_MASK 0x3 +#define RT3883_FLASH_CFG_WIDTH_8BIT 0x0 +#define RT3883_FLASH_CFG_WIDTH_16BIT 0x1 +#define RT3883_FLASH_CFG_WIDTH_32BIT 0x2 + + +/* UART registers */ +#define RT3883_UART_REG_RX 0 +#define RT3883_UART_REG_TX 1 +#define RT3883_UART_REG_IER 2 +#define RT3883_UART_REG_IIR 3 +#define RT3883_UART_REG_FCR 4 +#define RT3883_UART_REG_LCR 5 +#define RT3883_UART_REG_MCR 6 +#define RT3883_UART_REG_LSR 7 + +#endif /* _RT3883_REGS_H_ */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/war.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/war.h new file mode 100644 index 0000000..a7b712c --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MACH_RALINK_WAR_H +#define __ASM_MACH_RALINK_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MACH_RALINK_WAR_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt288x.c b/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt288x.c new file mode 100644 index 0000000..f679022 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt288x.c @@ -0,0 +1,250 @@ +/* + * Ralink RT288x SoC PCI register definitions + * + * Copyright (C) 2009 John Crispin <blogic@openwrt.org> + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/init.h> + +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> + +#define RT2880_PCI_MEM_BASE 0x20000000 +#define RT2880_PCI_MEM_SIZE 0x10000000 +#define RT2880_PCI_IO_BASE 0x00460000 +#define RT2880_PCI_IO_SIZE 0x00010000 + +#define RT2880_PCI_REG_PCICFG_ADDR 0x00 +#define RT2880_PCI_REG_PCIMSK_ADDR 0x0c +#define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10 +#define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18 +#define RT2880_PCI_REG_CONFIG_ADDR 0x20 +#define RT2880_PCI_REG_CONFIG_DATA 0x24 +#define RT2880_PCI_REG_MEMBASE 0x28 +#define RT2880_PCI_REG_IOBASE 0x2c +#define RT2880_PCI_REG_ID 0x30 +#define RT2880_PCI_REG_CLASS 0x34 +#define RT2880_PCI_REG_SUBID 0x38 +#define RT2880_PCI_REG_ARBCTL 0x80 + +static void __iomem *rt2880_pci_base; +static DEFINE_SPINLOCK(rt2880_pci_lock); + +static u32 rt2880_pci_reg_read(u32 reg) +{ + return readl(rt2880_pci_base + reg); +} + +static void rt2880_pci_reg_write(u32 val, u32 reg) +{ + writel(val, rt2880_pci_base + reg); +} + +static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot, + unsigned int func, unsigned int where) +{ + return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | + 0x80000000); +} + +static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + unsigned long flags; + u32 address; + u32 data; + + address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where); + + spin_lock_irqsave(&rt2880_pci_lock, flags); + rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); + data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt2880_pci_lock, flags); + + switch (size) { + case 1: + *val = (data >> ((where & 3) << 3)) & 0xff; + break; + case 2: + *val = (data >> ((where & 3) << 3)) & 0xffff; + break; + case 4: + *val = data; + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + unsigned long flags; + u32 address; + u32 data; + + address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where); + + spin_lock_irqsave(&rt2880_pci_lock, flags); + rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); + data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); + + switch (size) { + case 1: + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 2: + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 4: + data = val; + break; + } + + rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt2880_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops rt2880_pci_ops = { + .read = rt2880_pci_config_read, + .write = rt2880_pci_config_write, +}; + +static struct resource rt2880_pci_mem_resource = { + .name = "PCI MEM space", + .start = RT2880_PCI_MEM_BASE, + .end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct resource rt2880_pci_io_resource = { + .name = "PCI IO space", + .start = RT2880_PCI_IO_BASE, + .end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO, +}; + +static struct pci_controller rt2880_pci_controller = { + .pci_ops = &rt2880_pci_ops, + .mem_resource = &rt2880_pci_mem_resource, + .io_resource = &rt2880_pci_io_resource, +}; + +static inline u32 rt2880_pci_read_u32(unsigned long reg) +{ + unsigned long flags; + u32 address; + u32 ret; + + address = rt2880_pci_get_cfgaddr(0, 0, 0, reg); + + spin_lock_irqsave(&rt2880_pci_lock, flags); + rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); + ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt2880_pci_lock, flags); + + return ret; +} + +static inline void rt2880_pci_write_u32(unsigned long reg, u32 val) +{ + unsigned long flags; + u32 address; + + address = rt2880_pci_get_cfgaddr(0, 0, 0, reg); + + spin_lock_irqsave(&rt2880_pci_lock, flags); + rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); + rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt2880_pci_lock, flags); +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + u16 cmd; + int irq = -1; + + if (dev->bus->number != 0) + return irq; + + switch (PCI_SLOT(dev->devfn)) { + case 0x00: + rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000); + (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0); + break; + case 0x11: + irq = RT288X_CPU_IRQ_PCI; + break; + default: + printk("%s:%s[%d] trying to alloc unknown pci irq\n", + __FILE__, __func__, __LINE__); + BUG(); + break; + } + + pci_write_config_byte((struct pci_dev*)dev, PCI_CACHE_LINE_SIZE, 0x14); + pci_write_config_byte((struct pci_dev*)dev, PCI_LATENCY_TIMER, 0xFF); + pci_read_config_word((struct pci_dev*)dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK | + PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY; + pci_write_config_word((struct pci_dev*)dev, PCI_COMMAND, cmd); + pci_write_config_byte((struct pci_dev*)dev, PCI_INTERRUPT_LINE, + dev->irq); + return irq; +} + +int __init rt288x_register_pci(void) +{ + void __iomem *io_map_base; + int i; + + rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE); + + io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE); + rt2880_pci_controller.io_map_base = (unsigned long) io_map_base; + set_io_port_base((unsigned long) io_map_base); + + ioport_resource.start = RT2880_PCI_IO_BASE; + ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1; + + rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR); + for(i = 0; i < 0xfffff; i++) {} + + rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL); + rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR); + rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE); + rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE); + rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR); + rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID); + rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS); + rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID); + rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR); + + rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000); + (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0); + + register_pci_controller(&rt2880_pci_controller); + return 0; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} diff --git a/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt3883.c b/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt3883.c new file mode 100644 index 0000000..8a4c8ce --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt3883.c @@ -0,0 +1,487 @@ +/* + * Ralink RT3883 SoC PCI support + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> + +#define RT3883_MEMORY_BASE 0x00000000 +#define RT3883_MEMORY_SIZE 0x02000000 + +#define RT3883_PCI_MEM_BASE 0x20000000 +#define RT3883_PCI_MEM_SIZE 0x10000000 +#define RT3883_PCI_IO_BASE 0x10160000 +#define RT3883_PCI_IO_SIZE 0x00010000 + +#define RT3883_PCI_REG_PCICFG_ADDR 0x00 +#define RT3883_PCI_REG_PCIRAW_ADDR 0x04 +#define RT3883_PCI_REG_PCIINT_ADDR 0x08 +#define RT3883_PCI_REG_PCIMSK_ADDR 0x0c +#define RT3833_PCI_PCIINT_PCIE BIT(20) +#define RT3833_PCI_PCIINT_PCI1 BIT(19) +#define RT3833_PCI_PCIINT_PCI0 BIT(18) + +#define RT3883_PCI_REG_CONFIG_ADDR 0x20 +#define RT3883_PCI_REG_CONFIG_DATA 0x24 +#define RT3883_PCI_REG_MEMBASE 0x28 +#define RT3883_PCI_REG_IOBASE 0x2c +#define RT3883_PCI_REG_ARBCTL 0x80 + +#define RT3883_PCI_REG_BASE(_x) (0x1000 + (_x) * 0x1000) +#define RT3883_PCI_REG_BAR0SETUP_ADDR(_x) (RT3883_PCI_REG_BASE((_x)) + 0x10) +#define RT3883_PCI_REG_IMBASEBAR0_ADDR(_x) (RT3883_PCI_REG_BASE((_x)) + 0x18) +#define RT3883_PCI_REG_ID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x30) +#define RT3883_PCI_REG_CLASS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x34) +#define RT3883_PCI_REG_SUBID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x38) +#define RT3883_PCI_REG_STATUS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x50) + +static int (*rt3883_pci_plat_dev_init)(struct pci_dev *dev); +static void __iomem *rt3883_pci_base; +static DEFINE_SPINLOCK(rt3883_pci_lock); + +static inline u32 rt3883_pci_rr(unsigned reg) +{ + return readl(rt3883_pci_base + reg); +} + +static inline void rt3883_pci_wr(u32 val, unsigned reg) +{ + writel(val, rt3883_pci_base + reg); +} + +static inline u32 rt3883_pci_get_cfgaddr(unsigned int bus, unsigned int slot, + unsigned int func, unsigned int where) +{ + return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | + 0x80000000); +} + +static u32 rt3883_pci_read_u32(unsigned bus, unsigned slot, + unsigned func, unsigned reg) +{ + unsigned long flags; + u32 address; + u32 ret; + + address = rt3883_pci_get_cfgaddr(bus, slot, func, reg); + + spin_lock_irqsave(&rt3883_pci_lock, flags); + rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); + ret = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt3883_pci_lock, flags); + + return ret; +} + +static void rt3883_pci_write_u32(unsigned bus, unsigned slot, + unsigned func, unsigned reg, u32 val) +{ + unsigned long flags; + u32 address; + + address = rt3883_pci_get_cfgaddr(bus, slot, func, reg); + + spin_lock_irqsave(&rt3883_pci_lock, flags); + rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); + rt3883_pci_wr(val, RT3883_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt3883_pci_lock, flags); +} + +static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + u32 pending; + + pending = rt3883_pci_rr(RT3883_PCI_REG_PCIINT_ADDR) & + rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); + + if (!pending) { + spurious_interrupt(); + return; + } + + if (pending & RT3833_PCI_PCIINT_PCI0) + generic_handle_irq(RT3883_PCI_IRQ_PCI0); + + if (pending & RT3833_PCI_PCIINT_PCI1) + generic_handle_irq(RT3883_PCI_IRQ_PCI1); + + if (pending & RT3833_PCI_PCIINT_PCIE) + generic_handle_irq(RT3883_PCI_IRQ_PCIE); +} + +static void rt3883_pci_irq_unmask(struct irq_data *d) +{ + int irq = d->irq; + u32 mask; + u32 t; + + switch (irq) { + case RT3883_PCI_IRQ_PCI0: + mask = RT3833_PCI_PCIINT_PCI0; + break; + case RT3883_PCI_IRQ_PCI1: + mask = RT3833_PCI_PCIINT_PCI1; + break; + case RT3883_PCI_IRQ_PCIE: + mask = RT3833_PCI_PCIINT_PCIE; + break; + default: + BUG(); + } + + t = rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); + rt3883_pci_wr(t | mask, RT3883_PCI_REG_PCIMSK_ADDR); + /* flush write */ + rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); +} + +static void rt3883_pci_irq_mask(struct irq_data *d) +{ + int irq = d->irq; + u32 mask; + u32 t; + + switch (irq) { + case RT3883_PCI_IRQ_PCI0: + mask = RT3833_PCI_PCIINT_PCI0; + break; + case RT3883_PCI_IRQ_PCI1: + mask = RT3833_PCI_PCIINT_PCI1; + break; + case RT3883_PCI_IRQ_PCIE: + mask = RT3833_PCI_PCIINT_PCIE; + break; + default: + BUG(); + } + + t = rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); + rt3883_pci_wr(t & ~mask, RT3883_PCI_REG_PCIMSK_ADDR); + /* flush write */ + rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); +} + +static struct irq_chip rt3883_pci_irq_chip = { + .name = "RT3883 PCI", + .irq_mask = rt3883_pci_irq_mask, + .irq_unmask = rt3883_pci_irq_unmask, + .irq_mask_ack = rt3883_pci_irq_mask, +}; + +static void __init rt3883_pci_irq_init(void) +{ + int i; + + /* disable all interrupts */ + rt3883_pci_wr(0, RT3883_PCI_REG_PCIMSK_ADDR); + + for (i = RT3883_PCI_IRQ_BASE; + i < RT3883_PCI_IRQ_BASE + RT3883_PCI_IRQ_COUNT; i++) { + irq_set_chip_and_handler(i, &rt3883_pci_irq_chip, + handle_level_irq); + } + + irq_set_chained_handler(RT3883_CPU_IRQ_PCI, rt3883_pci_irq_handler); +} + +static int rt3883_pci_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + unsigned long flags; + u32 address; + u32 data; + + address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where); + + spin_lock_irqsave(&rt3883_pci_lock, flags); + rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); + data = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt3883_pci_lock, flags); + + switch (size) { + case 1: + *val = (data >> ((where & 3) << 3)) & 0xff; + break; + case 2: + *val = (data >> ((where & 3) << 3)) & 0xffff; + break; + case 4: + *val = data; + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + unsigned long flags; + u32 address; + u32 data; + + address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where); + + spin_lock_irqsave(&rt3883_pci_lock, flags); + rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); + data = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); + + switch (size) { + case 1: + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 2: + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 4: + data = val; + break; + } + + rt3883_pci_wr(data, RT3883_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt3883_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops rt3883_pci_ops = { + .read = rt3883_pci_config_read, + .write = rt3883_pci_config_write, +}; + +static struct resource rt3883_pci_mem_resource = { + .name = "PCI MEM space", + .start = RT3883_PCI_MEM_BASE, + .end = RT3883_PCI_MEM_BASE + RT3883_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct resource rt3883_pci_io_resource = { + .name = "PCI IO space", + .start = RT3883_PCI_IO_BASE, + .end = RT3883_PCI_IO_BASE + RT3883_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO, +}; + +static struct pci_controller rt3883_pci_controller = { + .pci_ops = &rt3883_pci_ops, + .mem_resource = &rt3883_pci_mem_resource, + .io_resource = &rt3883_pci_io_resource, +}; + +static void rt3883_pci_preinit(unsigned mode) +{ + u32 syscfg1; + u32 rstctrl; + u32 clkcfg1; + + if (mode & RT3883_PCI_MODE_PCIE) { + u32 val; + + val = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); + val &= ~(0x30); + val |= (2 << 4); + rt3883_sysc_wr(val, RT3883_SYSC_REG_SYSCFG1); + + val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN0); + val &= ~BIT(31); + rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN0); + + val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN1); + val &= 0x80ffffff; + rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN1); + + val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN1); + val |= 0xa << 24; + rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN1); + + val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN0); + val |= BIT(31); + rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN0); + + msleep(50); + } + + syscfg1 = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); + syscfg1 &= ~(RT3883_SYSCFG1_PCIE_RC_MODE | + RT3883_SYSCFG1_PCI_HOST_MODE); + + rstctrl = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); + rstctrl |= (RT3883_RSTCTRL_PCI | RT3883_RSTCTRL_PCIE); + + clkcfg1 = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1); + clkcfg1 &= ~(RT3883_CLKCFG1_PCI_CLK_EN | + RT3883_CLKCFG1_PCIE_CLK_EN); + + if (mode & RT3883_PCI_MODE_PCI) { + syscfg1 |= RT3883_SYSCFG1_PCI_HOST_MODE; + clkcfg1 |= RT3883_CLKCFG1_PCI_CLK_EN; + rstctrl &= ~RT3883_RSTCTRL_PCI; + } + if (mode & RT3883_PCI_MODE_PCIE) { + syscfg1 |= RT3883_SYSCFG1_PCI_HOST_MODE | + RT3883_SYSCFG1_PCIE_RC_MODE; + clkcfg1 |= RT3883_CLKCFG1_PCIE_CLK_EN; + rstctrl &= ~RT3883_RSTCTRL_PCIE; + } + + rt3883_sysc_wr(syscfg1, RT3883_SYSC_REG_SYSCFG1); + rt3883_sysc_wr(rstctrl, RT3883_SYSC_REG_RSTCTRL); + rt3883_sysc_wr(clkcfg1, RT3883_SYSC_REG_CLKCFG1); + + msleep(500); +} + +static int rt3883_pcie_ready(void) +{ + u32 status; + + msleep(500); + + status = rt3883_pci_rr(RT3883_PCI_REG_STATUS(1)); + if (status & BIT(0)) + return 0; + + /* TODO: reset PCIe and turn off PCIe clock */ + + return -ENODEV; +} + +void __init rt3883_pci_init(unsigned mode) +{ + u32 val; + int err; + + rt3883_pci_preinit(mode); + + rt3883_pci_base = ioremap(RT3883_PCI_BASE, PAGE_SIZE); + if (rt3883_pci_base == NULL) { + pr_err("failed to ioremap PCI registers\n"); + return; + } + + rt3883_pci_wr(0, RT3883_PCI_REG_PCICFG_ADDR); + if (mode & RT3883_PCI_MODE_PCI) + rt3883_pci_wr(BIT(16), RT3883_PCI_REG_PCICFG_ADDR); + + msleep(500); + + if (mode & RT3883_PCI_MODE_PCIE) { + err = rt3883_pcie_ready(); + if (err) + return; + } + + if (mode & RT3883_PCI_MODE_PCI) + rt3883_pci_wr(0x79, RT3883_PCI_REG_ARBCTL); + + rt3883_pci_wr(RT3883_PCI_MEM_BASE, RT3883_PCI_REG_MEMBASE); + rt3883_pci_wr(RT3883_PCI_IO_BASE, RT3883_PCI_REG_IOBASE); + + /* PCI */ + rt3883_pci_wr(0x03ff0000, RT3883_PCI_REG_BAR0SETUP_ADDR(0)); + rt3883_pci_wr(RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0_ADDR(0)); + rt3883_pci_wr(0x08021814, RT3883_PCI_REG_ID(0)); + rt3883_pci_wr(0x00800001, RT3883_PCI_REG_CLASS(0)); + rt3883_pci_wr(0x28801814, RT3883_PCI_REG_SUBID(0)); + + /* PCIe */ + rt3883_pci_wr(0x01ff0000, RT3883_PCI_REG_BAR0SETUP_ADDR(1)); + rt3883_pci_wr(RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0_ADDR(1)); + rt3883_pci_wr(0x08021814, RT3883_PCI_REG_ID(1)); + rt3883_pci_wr(0x06040001, RT3883_PCI_REG_CLASS(1)); + rt3883_pci_wr(0x28801814, RT3883_PCI_REG_SUBID(1)); + + rt3883_pci_irq_init(); + + /* PCIe */ + val = rt3883_pci_read_u32(0, 0x01, 0, PCI_COMMAND); + val |= 0x7; + rt3883_pci_write_u32(0, 0x01, 0, PCI_COMMAND, val); + + /* PCI */ + val = rt3883_pci_read_u32(0, 0x00, 0, PCI_COMMAND); + val |= 0x7; + rt3883_pci_write_u32(0, 0x00, 0, PCI_COMMAND, val); + + ioport_resource.start = rt3883_pci_io_resource.start; + ioport_resource.end = rt3883_pci_io_resource.end; + + register_pci_controller(&rt3883_pci_controller); +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq = -1; + + switch (dev->bus->number) { + case 0: + switch (PCI_SLOT(dev->devfn)) { + case 0x00: + rt3883_pci_wr(0x03ff0001, + RT3883_PCI_REG_BAR0SETUP_ADDR(0)); + rt3883_pci_wr(0x03ff0001, + RT3883_PCI_REG_BAR0SETUP_ADDR(1)); + + rt3883_pci_write_u32(0, 0x00, 0, PCI_BASE_ADDRESS_0, + RT3883_MEMORY_BASE); + rt3883_pci_read_u32(0, 0x00, 0, PCI_BASE_ADDRESS_0); + + irq = RT3883_CPU_IRQ_PCI; + break; + case 0x01: + rt3883_pci_write_u32(0, 0x01, 0, PCI_IO_BASE, + 0x00000101); + break; + case 0x11: + irq = RT3883_PCI_IRQ_PCI0; + break; + case 0x12: + irq = RT3883_PCI_IRQ_PCI1; + break; + } + break; + + case 1: + irq = RT3883_PCI_IRQ_PCIE; + break; + + default: + dev_err(&dev->dev, "no IRQ specified\n"); + return irq; + } + + return irq; +} + +void __init rt3883_pci_set_plat_dev_init(int (*f)(struct pci_dev *dev)) +{ + rt3883_pci_plat_dev_init = f; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + if (rt3883_pci_plat_dev_init) + return rt3883_pci_plat_dev_init(dev); + + return 0; +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/Kconfig b/target/linux/ramips/files-3.7/arch/mips/ralink/Kconfig new file mode 100644 index 0000000..74bca6d --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/Kconfig @@ -0,0 +1,83 @@ +if MIPS_RALINK + +choice + prompt "Ralink SoC selection" + default SOC_RT288X + help + Select Ralink MIPS SoC type. + + config RALINK_RT288X + bool "RT288x" + select SOC_RT288X + + config RALINK_RT305X + bool "RT305x" + select SOC_RT305X + + config RALINK_RT3883 + bool "RT3883" + select SOC_RT3883 + +endchoice + +source "arch/mips/ralink/rt288x/Kconfig" +source "arch/mips/ralink/rt305x/Kconfig" +source "arch/mips/ralink/rt3883/Kconfig" + +config SOC_RT288X + bool + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select ARCH_REQUIRE_GPIOLIB + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK + select MIPS_MACHINE + select HAVE_CLK + +config SOC_RT305X + bool + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select ARCH_REQUIRE_GPIOLIB + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK + select MIPS_MACHINE + select USB_ARCH_HAS_HCD + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI + select HAVE_CLK + +config SOC_RT3883 + bool + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select ARCH_REQUIRE_GPIOLIB + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK + select MIPS_MACHINE + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI + select HAVE_CLK + +config RALINK_DEV_GPIO_BUTTONS + def_bool n + +config RALINK_DEV_GPIO_LEDS + def_bool n + +endif diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/Platform b/target/linux/ramips/files-3.7/arch/mips/ralink/Platform new file mode 100644 index 0000000..1b54049 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/Platform @@ -0,0 +1,26 @@ +# +# Ralink SoC common stuff +# +core-$(CONFIG_MIPS_RALINK) += arch/mips/ralink/common/ +cflags-$(CONFIG_MIPS_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink + +# +# Ralink RT288x +# +core-$(CONFIG_RALINK_RT288X) += arch/mips/ralink/rt288x/ +cflags-$(CONFIG_RALINK_RT288X) += -I$(srctree)//arch/mips/include/asm/mach-ralink/rt288x +load-$(CONFIG_RALINK_RT288X) += 0xffffffff88000000 + +# +# Ralink RT305x +# +core-$(CONFIG_RALINK_RT305X) += arch/mips/ralink/rt305x/ +cflags-$(CONFIG_RALINK_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x +load-$(CONFIG_RALINK_RT305X) += 0xffffffff80000000 + +# +# Ralink RT3883 +# +core-$(CONFIG_RALINK_RT3883) += arch/mips/ralink/rt3883/ +cflags-$(CONFIG_RALINK_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883 +load-$(CONFIG_RALINK_RT3883) += 0xffffffff80000000 diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/Makefile b/target/linux/ramips/files-3.7/arch/mips/ralink/common/Makefile new file mode 100644 index 0000000..adab85f --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/common/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for the Ralink common stuff +# +# Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation. + +obj-y := prom.o setup.o intc.o gpio.o + +obj-$(CONFIG_RALINK_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o +obj-$(CONFIG_RALINK_DEV_GPIO_LEDS) += dev-gpio-leds.o diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-buttons.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-buttons.c new file mode 100644 index 0000000..75a2a17 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-buttons.c @@ -0,0 +1,57 @@ +/* + * Ralink SoC GPIO button support + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "linux/init.h" +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <asm/mach-ralink/dev-gpio-buttons.h> + +void __init ramips_register_gpio_buttons(int id, + unsigned poll_interval, + unsigned nbuttons, + struct gpio_keys_button *buttons) +{ + struct platform_device *pdev; + struct gpio_keys_platform_data pdata; + struct gpio_keys_button *p; + int err; + + p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL); + if (!p) + return; + + memcpy(p, buttons, nbuttons * sizeof(*p)); + + pdev = platform_device_alloc("gpio-keys-polled", id); + if (!pdev) + goto err_free_buttons; + + memset(&pdata, 0, sizeof(pdata)); + pdata.poll_interval = poll_interval; + pdata.nbuttons = nbuttons; + pdata.buttons = p; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto err_put_pdev; + + err = platform_device_add(pdev); + if (err) + goto err_put_pdev; + + return; + +err_put_pdev: + platform_device_put(pdev); + +err_free_buttons: + kfree(p); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-leds.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-leds.c new file mode 100644 index 0000000..a45a7cb --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-leds.c @@ -0,0 +1,54 @@ +/* + * Ralink SoC GPIO LED device support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <asm/mach-ralink/dev-gpio-leds.h> + +void __init ramips_register_gpio_leds(int id, unsigned num_leds, + struct gpio_led *leds) +{ + struct platform_device *pdev; + struct gpio_led_platform_data pdata; + struct gpio_led *p; + int err; + + p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL); + if (!p) + return; + + memcpy(p, leds, num_leds * sizeof(*p)); + + pdev = platform_device_alloc("leds-gpio", id); + if (!pdev) + goto err_free_leds; + + memset(&pdata, 0, sizeof(pdata)); + pdata.num_leds = num_leds; + pdata.leds = p; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto err_put_pdev; + + err = platform_device_add(pdev); + if (err) + goto err_put_pdev; + + return; + +err_put_pdev: + platform_device_put(pdev); + +err_free_leds: + kfree(p); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/gpio.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/gpio.c new file mode 100644 index 0000000..f03d145 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/common/gpio.c @@ -0,0 +1,113 @@ +/* + * Ralink SoC specific GPIO support + * + * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/mach-ralink/ramips_gpio.h> + +static inline struct ramips_gpio_chip *to_ramips_gpio(struct gpio_chip *chip) +{ + struct ramips_gpio_chip *rg; + + rg = container_of(chip, struct ramips_gpio_chip, chip); + return rg; +} + +static inline void ramips_gpio_wr(struct ramips_gpio_chip *rg, u8 reg, u32 val) +{ + __raw_writel(val, rg->regs_base + rg->regs[reg]); +} + +static inline u32 ramips_gpio_rr(struct ramips_gpio_chip *rg, u8 reg) +{ + return __raw_readl(rg->regs_base + rg->regs[reg]); +} + +static int ramips_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct ramips_gpio_chip *rg = to_ramips_gpio(chip); + unsigned long flags; + u32 t; + + spin_lock_irqsave(&rg->lock, flags); + t = ramips_gpio_rr(rg, RAMIPS_GPIO_REG_DIR); + t &= ~(1 << offset); + ramips_gpio_wr(rg, RAMIPS_GPIO_REG_DIR, t); + spin_unlock_irqrestore(&rg->lock, flags); + + return 0; +} + +static int ramips_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct ramips_gpio_chip *rg = to_ramips_gpio(chip); + unsigned long flags; + u32 reg; + u32 t; + + reg = (value) ? RAMIPS_GPIO_REG_SET : RAMIPS_GPIO_REG_RESET; + + spin_lock_irqsave(&rg->lock, flags); + ramips_gpio_wr(rg, reg, 1 << offset); + + t = ramips_gpio_rr(rg, RAMIPS_GPIO_REG_DIR); + t |= 1 << offset; + ramips_gpio_wr(rg, RAMIPS_GPIO_REG_DIR, t); + spin_unlock_irqrestore(&rg->lock, flags); + + return 0; +} + +static void ramips_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct ramips_gpio_chip *rg = to_ramips_gpio(chip); + u32 reg; + + reg = (value) ? RAMIPS_GPIO_REG_SET : RAMIPS_GPIO_REG_RESET; + ramips_gpio_wr(rg, reg, 1 << offset); +} + +static int ramips_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct ramips_gpio_chip *rg = to_ramips_gpio(chip); + u32 t; + + t = ramips_gpio_rr(rg, RAMIPS_GPIO_REG_DATA); + return !!(t & (1 << offset)); +} + +static __init void ramips_gpio_chip_add(struct ramips_gpio_chip *rg) +{ + spin_lock_init(&rg->lock); + + rg->regs_base = ioremap(rg->map_base, rg->map_size); + + rg->chip.direction_input = ramips_gpio_direction_input; + rg->chip.direction_output = ramips_gpio_direction_output; + rg->chip.get = ramips_gpio_get; + rg->chip.set = ramips_gpio_set; + + /* set polarity to low for all lines */ + ramips_gpio_wr(rg, RAMIPS_GPIO_REG_POL, 0); + + gpiochip_add(&rg->chip); +} + +__init int ramips_gpio_init(struct ramips_gpio_data *data) +{ + int i; + + for (i = 0; i < data->num_chips; i++) + ramips_gpio_chip_add(&data->chips[i]); + + return 0; +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/intc.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/intc.c new file mode 100644 index 0000000..65e42b4 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/common/intc.c @@ -0,0 +1,99 @@ +/* + * Ralink SoC Interrupt controller routines + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/bitops.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> + +#include <asm/mach-ralink/common.h> + +/* INTC register offsets */ +#define INTC_REG_STATUS0 0x00 +#define INTC_REG_STATUS1 0x04 +#define INTC_REG_TYPE 0x20 +#define INTC_REG_RAW_STATUS 0x30 +#define INTC_REG_ENABLE 0x34 +#define INTC_REG_DISABLE 0x38 + +#define INTC_INT_GLOBAL BIT(31) +#define INTC_IRQ_COUNT 32 + +static unsigned int ramips_intc_irq_base; +static void __iomem *ramips_intc_base; + +static inline void ramips_intc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, ramips_intc_base + reg); +} + +static inline u32 ramips_intc_rr(unsigned reg) +{ + return __raw_readl(ramips_intc_base + reg); +} + +static void ramips_intc_irq_unmask(struct irq_data *d) +{ + unsigned int irq = d->irq - ramips_intc_irq_base; + + ramips_intc_wr((1 << irq), INTC_REG_ENABLE); +} + +static void ramips_intc_irq_mask(struct irq_data *d) +{ + unsigned int irq = d->irq - ramips_intc_irq_base; + + ramips_intc_wr((1 << irq), INTC_REG_DISABLE); +} + +static struct irq_chip ramips_intc_irq_chip = { + .name = "INTC", + .irq_unmask = ramips_intc_irq_unmask, + .irq_mask = ramips_intc_irq_mask, + .irq_mask_ack = ramips_intc_irq_mask, +}; + +static struct irqaction ramips_intc_irqaction = { + .handler = no_action, + .name = "cascade [INTC]", +}; + +void __init ramips_intc_irq_init(unsigned intc_base, unsigned irq, + unsigned irq_base) +{ + int i; + + ramips_intc_base = ioremap_nocache(intc_base, PAGE_SIZE); + ramips_intc_irq_base = irq_base; + + /* disable all interrupts */ + ramips_intc_wr(~0, INTC_REG_DISABLE); + + /* route all INTC interrupts to MIPS HW0 interrupt */ + ramips_intc_wr(0, INTC_REG_TYPE); + + for (i = ramips_intc_irq_base; + i < ramips_intc_irq_base + INTC_IRQ_COUNT; i++) + irq_set_chip_and_handler(i, &ramips_intc_irq_chip, + handle_level_irq); + + setup_irq(irq, &ramips_intc_irqaction); + ramips_intc_wr(INTC_INT_GLOBAL, INTC_REG_ENABLE); +} + +u32 ramips_intc_get_status(void) +{ + return ramips_intc_rr(INTC_REG_STATUS0); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/prom.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/prom.c new file mode 100644 index 0000000..26169d3 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/common/prom.c @@ -0,0 +1,168 @@ +/* + * Ralink SoC specific prom routines + * + * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com> + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/string.h> + +#include <asm/bootinfo.h> +#include <asm/addrspace.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/machine.h> + +unsigned long ramips_mem_base; +unsigned long ramips_mem_size_min; +unsigned long ramips_mem_size_max; + +static inline void *to_ram_addr(void *addr) +{ + u32 base; + + base = KSEG0ADDR(ramips_mem_base); + if (((u32) addr > base) && + ((u32) addr < (base + ramips_mem_size_max))) + return addr; + + base = KSEG1ADDR(ramips_mem_base); + if (((u32) addr > base) && + ((u32) addr < (base + ramips_mem_size_max))) + return addr; + + /* some U-Boot variants uses physical addresses */ + base = ramips_mem_base; + if (((u32) addr > base) && + ((u32) addr < (base + ramips_mem_size_max))) + return (void *)KSEG0ADDR(addr); + + return NULL; +} + +static char ramips_cmdline_buf[COMMAND_LINE_SIZE] __initdata; +static void __init prom_append_cmdline(const char *name, + const char *value) +{ + snprintf(ramips_cmdline_buf, sizeof(ramips_cmdline_buf), + " %s=%s", name, value); + strlcat(arcs_cmdline, ramips_cmdline_buf, sizeof(arcs_cmdline)); +} + +#ifdef CONFIG_IMAGE_CMDLINE_HACK +extern char __image_cmdline[]; + +static int __init use_image_cmdline(void) +{ + char *p = __image_cmdline; + int replace = 0; + + if (*p == '-') { + replace = 1; + p++; + } + + if (*p == '\0') + return 0; + + if (replace) { + strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline)); + } else { + strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); + strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); + } + + return 1; +} +#else +static int inline use_image_cmdline(void) { return 0; } +#endif + +static __init void prom_init_cmdline(int argc, char **argv) +{ + int i; + + if (use_image_cmdline()) + return; + + if (!argv) { + printk(KERN_DEBUG "argv=%p is invalid, skipping\n", + argv); + return; + } + + for (i = 0; i < argc; i++) { + char *p = to_ram_addr(argv[i]); + + if (!p) { + printk(KERN_DEBUG + "argv[%d]=%p is invalid, skipping\n", + i, argv[i]); + continue; + } + + printk(KERN_DEBUG "argv[%d]: %s\n", i, p); + strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); + strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); + } +} + +static __init char *prom_append_env(char **env, const char *envname) +{ +#define PROM_MAX_ENVS 256 + int len = strlen(envname); + int i; + + if (!env) { + printk(KERN_DEBUG "env=%p is not in RAM, skipping\n", + env); + return NULL; + } + + for (i = 0; i < PROM_MAX_ENVS; i++) { + char *p = to_ram_addr(env[i]); + + if (!p) + break; + + printk(KERN_DEBUG "env[%d]: %s\n", i, p); + if (strncmp(envname, p, len) == 0 && p[len] == '=') + prom_append_cmdline(envname, p + len + 1); + } + + return NULL; +#undef PROM_MAX_ENVS +} + +void __init prom_init(void) +{ + int argc; + char **envp; + char **argv; + + ramips_soc_prom_init(); + + printk(KERN_DEBUG + "prom: fw_arg0=%08x, fw_arg1=%08x, fw_arg2=%08x, fw_arg3=%08x\n", + (unsigned int)fw_arg0, (unsigned int)fw_arg1, + (unsigned int)fw_arg2, (unsigned int)fw_arg3); + + argc = fw_arg0; + argv = to_ram_addr((void *)fw_arg1); + prom_init_cmdline(argc, argv); + + envp = to_ram_addr((void *)fw_arg2); + prom_append_env(envp, "board"); + prom_append_env(envp, "ethaddr"); +} + +void __init prom_free_prom_memory(void) +{ + /* We do not have to prom memory to free */ +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/setup.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/setup.c new file mode 100644 index 0000000..1af855e --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/common/setup.c @@ -0,0 +1,98 @@ +/* + * Ralink SoC common setup + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/serial_8250.h> + +#include <asm/bootinfo.h> +#include <asm/addrspace.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/machine.h> + +unsigned char ramips_sys_type[RAMIPS_SYS_TYPE_LEN]; +unsigned long (*ramips_get_mem_size)(void); + +const char *get_system_type(void) +{ + return ramips_sys_type; +} + +static void __init detect_mem_size(void) +{ + unsigned long size; + + if (ramips_get_mem_size) { + size = ramips_get_mem_size(); + } else { + void *base; + + base = (void *) KSEG1ADDR(detect_mem_size); + for (size = ramips_mem_size_min; size < ramips_mem_size_max; + size <<= 1 ) { + if (!memcmp(base, base + size, 1024)) + break; + } + } + + add_memory_region(ramips_mem_base, size, BOOT_MEM_RAM); +} + +void __init ramips_early_serial_setup(int line, unsigned base, unsigned freq, + unsigned irq) +{ + struct uart_port p; + int err; + + memset(&p, 0, sizeof(p)); + p.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; + p.iotype = UPIO_AU; + p.uartclk = freq; + p.regshift = 2; + p.type = PORT_16550A; + + p.mapbase = base; + p.membase = ioremap_nocache(p.mapbase, PAGE_SIZE); + p.line = line; + p.irq = irq; + + err = early_serial_setup(&p); + if (err) + printk(KERN_ERR "early serial%d registration failed %d\n", + line, err); +} + +void __init plat_mem_setup(void) +{ + set_io_port_base(KSEG1); + + detect_mem_size(); + ramips_soc_setup(); +} + +__setup("board=", mips_machtype_setup); + +static int __init ramips_machine_setup(void) +{ + mips_machine_setup(); + return 0; +} + +arch_initcall(ramips_machine_setup); + +static void __init ramips_generic_init(void) +{ +} + +MIPS_MACHINE(RAMIPS_MACH_GENERIC, "Generic", "Generic Ralink board", + ramips_generic_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Kconfig new file mode 100644 index 0000000..739561c --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Kconfig @@ -0,0 +1,36 @@ +if RALINK_RT288X + +menu "Ralink RT288x machine selection" + +config RT288X_MACH_F5D8235_V1 + bool "Belkin F5D8235 V1 board support" + select RALINK_DEV_GPIO_LEDS + +config RT288X_MACH_BR6524N + bool "Edimax BR6524N support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT288X_MACH_RT_N15 + bool "Asus RT-N15 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT288X_MACH_V11ST_FE + bool "Ralink V11ST-FE board support" + select HW_HAS_PCI + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT288X_MACH_WLI_TX4_AG300N + bool "Buffalo WLI-TX4-AG300N board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT288X_MACH_WZR_AGL300NH + bool "Buffalo WZR-AGL300NH board support" + select RALINK_DEV_GPIO_LEDS + +endmenu + +endif diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Makefile new file mode 100644 index 0000000..eb60c5d --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Makefile @@ -0,0 +1,21 @@ +# +# Makefile for the Ralink RT288x SoC specific parts of the kernel +# +# Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com> +# Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> +# Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation. + +obj-y := irq.o setup.o rt288x.o devices.o clock.o + +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-$(CONFIG_RT288X_MACH_F5D8235_V1) += mach-f5d8235-v1.o +obj-$(CONFIG_RT288X_MACH_BR6524N) += mach-br6524n.o +obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o +obj-$(CONFIG_RT288X_MACH_V11ST_FE) += mach-v11st-fe.o +obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o +obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/clock.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/clock.c new file mode 100644 index 0000000..36d754d --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/clock.c @@ -0,0 +1,99 @@ +/* + * Ralink RT288X clock API + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include "common.h" + +struct clk { + unsigned long rate; +}; + +static struct clk rt288x_cpu_clk; +static struct clk rt288x_sys_clk; +static struct clk rt288x_wdt_clk; +static struct clk rt288x_uart_clk; + +void __init rt288x_clocks_init(void) +{ + u32 t; + + t = rt288x_sysc_rr(SYSC_REG_SYSTEM_CONFIG); + t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK); + + switch (t) { + case SYSTEM_CONFIG_CPUCLK_250: + rt288x_cpu_clk.rate = 250000000; + break; + case SYSTEM_CONFIG_CPUCLK_266: + rt288x_cpu_clk.rate = 266666667; + break; + case SYSTEM_CONFIG_CPUCLK_280: + rt288x_cpu_clk.rate = 280000000; + break; + case SYSTEM_CONFIG_CPUCLK_300: + rt288x_cpu_clk.rate = 300000000; + break; + } + + rt288x_sys_clk.rate = rt288x_cpu_clk.rate / 2; + rt288x_uart_clk.rate = rt288x_sys_clk.rate; + rt288x_wdt_clk.rate = rt288x_sys_clk.rate; +} + +/* + * Linux clock API + */ +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "sys")) + return &rt288x_sys_clk; + + if (!strcmp(id, "cpu")) + return &rt288x_cpu_clk; + + if (!strcmp(id, "wdt")) + return &rt288x_wdt_clk; + + if (!strcmp(id, "uart")) + return &rt288x_uart_clk; + + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/common.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/common.h new file mode 100644 index 0000000..f2415c5 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/common.h @@ -0,0 +1,16 @@ +/* + * Ralink RT288X SoC common defines + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT288X_COMMON_H +#define _RT288X_COMMON_H + +void rt288x_clocks_init(void); + +#endif /* _RT288X_COMMON_H */
\ No newline at end of file diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.c new file mode 100644 index 0000000..196810a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.c @@ -0,0 +1,211 @@ +/* + * Ralink RT288x SoC platform device registration + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/physmap.h> +#include <linux/etherdevice.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/rt2x00_platform.h> + +#include <asm/addrspace.h> + +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +static struct resource rt288x_flash0_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = KSEG1ADDR(RT2880_FLASH0_BASE), + .end = KSEG1ADDR(RT2880_FLASH0_BASE) + + RT2880_FLASH0_SIZE - 1, + }, +}; + +struct physmap_flash_data rt288x_flash0_data; +static struct platform_device rt288x_flash0_device = { + .name = "physmap-flash", + .resource = rt288x_flash0_resources, + .num_resources = ARRAY_SIZE(rt288x_flash0_resources), + .dev = { + .platform_data = &rt288x_flash0_data, + }, +}; + +static struct resource rt288x_flash1_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = KSEG1ADDR(RT2880_FLASH1_BASE), + .end = KSEG1ADDR(RT2880_FLASH1_BASE) + + RT2880_FLASH1_SIZE - 1, + }, +}; + +struct physmap_flash_data rt288x_flash1_data; +static struct platform_device rt288x_flash1_device = { + .name = "physmap-flash", + .resource = rt288x_flash1_resources, + .num_resources = ARRAY_SIZE(rt288x_flash1_resources), + .dev = { + .platform_data = &rt288x_flash1_data, + }, +}; + +static int rt288x_flash_instance __initdata; +void __init rt288x_register_flash(unsigned int id) +{ + struct platform_device *pdev; + struct physmap_flash_data *pdata; + u32 t; + int reg; + + switch (id) { + case 0: + pdev = &rt288x_flash0_device; + reg = MEMC_REG_FLASH_CFG0; + break; + case 1: + pdev = &rt288x_flash1_device; + reg = MEMC_REG_FLASH_CFG1; + break; + default: + return; + } + + t = rt288x_memc_rr(reg); + t = (t >> FLASH_CFG_WIDTH_SHIFT) & FLASH_CFG_WIDTH_MASK; + + pdata = pdev->dev.platform_data; + switch (t) { + case FLASH_CFG_WIDTH_8BIT: + pdata->width = 1; + break; + case FLASH_CFG_WIDTH_16BIT: + pdata->width = 2; + break; + case FLASH_CFG_WIDTH_32BIT: + pdata->width = 4; + break; + default: + printk(KERN_ERR "RT288x: flash bank%u witdh is invalid\n", id); + return; + } + + pdev->id = rt288x_flash_instance; + + platform_device_register(pdev); + rt288x_flash_instance++; +} + +static struct resource rt288x_wifi_resources[] = { + { + .start = RT2880_WMAC_BASE, + .end = RT2880_WMAC_BASE + 0x3FFFF, + .flags = IORESOURCE_MEM, + }, { + .start = RT288X_CPU_IRQ_WNIC, + .end = RT288X_CPU_IRQ_WNIC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct rt2x00_platform_data rt288x_wifi_data; +static struct platform_device rt288x_wifi_device = { + .name = "rt2800_wmac", + .resource = rt288x_wifi_resources, + .num_resources = ARRAY_SIZE(rt288x_wifi_resources), + .dev = { + .platform_data = &rt288x_wifi_data, + } +}; + +void __init rt288x_register_wifi(void) +{ + rt288x_wifi_data.eeprom_file_name = "soc_wmac.eeprom"; + platform_device_register(&rt288x_wifi_device); +} + +static void rt288x_fe_reset(void) +{ + rt288x_sysc_wr(RT2880_RESET_FE, SYSC_REG_RESET_CTRL); +} + +static struct resource rt288x_eth_resources[] = { + { + .start = RT2880_FE_BASE, + .end = RT2880_FE_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT288X_CPU_IRQ_FE, + .end = RT288X_CPU_IRQ_FE, + .flags = IORESOURCE_IRQ, + }, +}; + +struct ramips_eth_platform_data rt288x_eth_data; +static struct platform_device rt288x_eth_device = { + .name = "ramips_eth", + .resource = rt288x_eth_resources, + .num_resources = ARRAY_SIZE(rt288x_eth_resources), + .dev = { + .platform_data = &rt288x_eth_data, + } +}; + +void __init rt288x_register_ethernet(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "sys"); + if (IS_ERR(clk)) + panic("unable to get SYS clock, err=%ld", PTR_ERR(clk)); + + rt288x_eth_data.sys_freq = clk_get_rate(clk); + rt288x_eth_data.reset_fe = rt288x_fe_reset; + rt288x_eth_data.min_pkt_len = 64; + + if (!is_valid_ether_addr(rt288x_eth_data.mac)) + random_ether_addr(rt288x_eth_data.mac); + + platform_device_register(&rt288x_eth_device); +} + +static struct resource rt288x_wdt_resources[] = { + { + .start = RT2880_TIMER_BASE, + .end = RT2880_TIMER_BASE + RT2880_TIMER_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rt288x_wdt_device = { + .name = "ramips-wdt", + .id = -1, + .resource = rt288x_wdt_resources, + .num_resources = ARRAY_SIZE(rt288x_wdt_resources), +}; + +void __init rt288x_register_wdt(void) +{ + u32 t; + + /* enable WDT reset output on pin SRAM_CS_N */ + t = rt288x_sysc_rr(SYSC_REG_CLKCFG); + t |= CLKCFG_SRAM_CS_N_WDT; + rt288x_sysc_wr(t, SYSC_REG_CLKCFG); + + platform_device_register(&rt288x_wdt_device); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.h new file mode 100644 index 0000000..d097e5d --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.h @@ -0,0 +1,28 @@ +/* + * Ralink RT288x SoC specific platform definitions + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_RT288X_PLATFORM_H +#define __ASM_MACH_RT288X_PLATFORM_H + +struct physmap_flash_data; + +extern struct physmap_flash_data rt288x_flash0_data; +extern struct physmap_flash_data rt288x_flash1_data; +void rt288x_register_flash(unsigned int id); + +void rt288x_register_wifi(void); + +extern struct ramips_eth_platform_data rt288x_eth_data; +void rt288x_register_ethernet(void); + +void rt288x_register_wdt(void); + +#endif /* __ASM_MACH_RT288X_PLATFORM_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/early_printk.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/early_printk.c new file mode 100644 index 0000000..9fd7adb --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/early_printk.c @@ -0,0 +1,30 @@ +/* + * Ralink RT288x SoC early printk support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/serial_reg.h> + +#include <asm/addrspace.h> + +#include <asm/mach-ralink/rt288x_regs.h> + +#define UART_READ(r) \ + __raw_readl((void __iomem *)(KSEG1ADDR(RT2880_UART1_BASE) + 4 * (r))) + +#define UART_WRITE(r, v) \ + __raw_writel((v), (void __iomem *)(KSEG1ADDR(RT2880_UART1_BASE) + 4 * (r))) + +void prom_putchar(unsigned char ch) +{ + while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0); + UART_WRITE(UART_REG_TX, ch); + while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/irq.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/irq.c new file mode 100644 index 0000000..5465a45 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/irq.c @@ -0,0 +1,81 @@ +/* + * Ralink RT288x SoC specific interrupt handling + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> + +static void rt288x_intc_irq_dispatch(void) +{ + u32 pending; + + pending = ramips_intc_get_status(); + + if (pending & RT2880_INTC_INT_TIMER0) + do_IRQ(RT2880_INTC_IRQ_TIMER0); + + else if (pending & RT2880_INTC_INT_TIMER1) + do_IRQ(RT2880_INTC_IRQ_TIMER1); + + else if (pending & RT2880_INTC_INT_UART0) + do_IRQ(RT2880_INTC_IRQ_UART0); + + else if (pending & RT2880_INTC_INT_PCM) + do_IRQ(RT2880_INTC_IRQ_PCM); + + else if (pending & RT2880_INTC_INT_UART1) + do_IRQ(RT2880_INTC_IRQ_UART1); + + /* TODO: handle PIO interrupts as well */ + + else + spurious_interrupt(); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long pending; + + pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) + do_IRQ(RT288X_CPU_IRQ_COUNTER); + + else if (pending & STATUSF_IP4) + do_IRQ(RT288X_CPU_IRQ_PCI); + + else if (pending & STATUSF_IP5) + do_IRQ(RT288X_CPU_IRQ_FE); + + else if (pending & STATUSF_IP6) + do_IRQ(RT288X_CPU_IRQ_WNIC); + + else if (pending & STATUSF_IP2) + rt288x_intc_irq_dispatch(); + + else + spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(); + ramips_intc_irq_init(RT2880_INTC_BASE, RT288X_CPU_IRQ_INTC, + RT288X_INTC_IRQ_BASE); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-br6524n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-br6524n.c new file mode 100644 index 0000000..ff4746c --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-br6524n.c @@ -0,0 +1,74 @@ +/* + * Edimax BR6524N board support + * + * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define BR6524N_GPIO_STATUS_LED 12 +#define BR6524N_GPIO_BUTTON_WPS 0 + +#define BR6524N_KEYS_POLL_INTERVAL 20 +#define BR6524N_KEYS_DEBOUNCE_INTERVAL (3 * BR6524N_KEYS_POLL_INTERVAL) + +static struct gpio_led br6524n_leds_gpio[] __initdata = { + { + .name = "br6524n:green:status", + .gpio = BR6524N_GPIO_STATUS_LED, + .active_low = 1, + } +}; + +static struct gpio_keys_button br6524n_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = BR6524N_KEYS_DEBOUNCE_INTERVAL, + .gpio = BR6524N_GPIO_BUTTON_WPS, + } +}; + +static void __init br6524n_fe_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + + rt288x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(br6524n_leds_gpio), + br6524n_leds_gpio); + + ramips_register_gpio_buttons(-1, BR6524N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(br6524n_gpio_buttons), + br6524n_gpio_buttons); + + rt288x_register_wifi(); + + /* Board is connected to an IC+ IP175C Fast Ethernet switch */ + rt288x_eth_data.speed = SPEED_100; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_eth_data.phy_mask = BIT(0); + rt288x_register_ethernet(); + + rt288x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_BR6524N, "BR6524N", "Edimax BR6524N", br6524n_fe_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-f5d8235-v1.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-f5d8235-v1.c new file mode 100644 index 0000000..7679572 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-f5d8235-v1.c @@ -0,0 +1,106 @@ +/* + * Belkin F5D825 V1 board support + * + * Copyright (C) 2011 Cezary Jackiewicz <cezary.jackiewicz@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> + +#include "devices.h" + +#include <linux/rtl8366.h> +#include <linux/ethtool.h> + +#include <asm/mach-ralink/ramips_eth_platform.h> + +#define F5D8235_GPIO_RTL8366_SCK 2 +#define F5D8235_GPIO_RTL8366_SDA 1 + +#define F5D8235_GPIO_LED_USB_BLUE 7 +#define F5D8235_GPIO_LED_USB_ORANGE 8 +#define F5D8235_GPIO_BUTTON_WPS 0 +#define F5D8235_GPIO_BUTTON_RESET 9 + +#define F5D8235_KEYS_POLL_INTERVAL 20 +#define F5D8235_KEYS_DEBOUNCE_INTERVAL (3 * F5D8235_KEYS_POLL_INTERVAL) + +static struct rtl8366_platform_data f5d8235_rtl8366s_data = { + .gpio_sda = F5D8235_GPIO_RTL8366_SDA, + .gpio_sck = F5D8235_GPIO_RTL8366_SCK, +}; + +static struct platform_device f5d8235_rtl8366s_device = { + .name = RTL8366S_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &f5d8235_rtl8366s_data, + } +}; + +static struct gpio_led f5d8235_leds_gpio[] __initdata = { + { + .name = "f5d8235-v1:blue:storage", + .gpio = F5D8235_GPIO_LED_USB_BLUE, + .active_low = 1, + },{ + .name = "f5d8235-v1:orange:storage", + .gpio = F5D8235_GPIO_LED_USB_ORANGE, + .active_low = 1, + } +}; + +static struct gpio_keys_button f5d8235_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = F5D8235_KEYS_DEBOUNCE_INTERVAL, + .gpio = F5D8235_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = F5D8235_KEYS_DEBOUNCE_INTERVAL, + .gpio = F5D8235_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init f5d8235_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C); + + rt288x_register_flash(0); + rt288x_register_wifi(); + rt288x_register_wdt(); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235_leds_gpio), + f5d8235_leds_gpio); + + ramips_register_gpio_buttons(-1, F5D8235_KEYS_POLL_INTERVAL, + ARRAY_SIZE(f5d8235_gpio_buttons), + f5d8235_gpio_buttons); + + platform_device_register(&f5d8235_rtl8366s_device); + + rt288x_eth_data.speed = SPEED_1000; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_register_ethernet(); +} + +MIPS_MACHINE(RAMIPS_MACH_F5D8235_V1, "F5D8235_V1", + "Belkin F5D8235 v1", f5d8235_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-rt-n15.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-rt-n15.c new file mode 100644 index 0000000..1085b82 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-rt-n15.c @@ -0,0 +1,99 @@ +/* + * Asus RT-N15 board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/rtl8366.h> +#include <linux/ethtool.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define RT_N15_GPIO_LED_POWER 11 +#define RT_N15_GPIO_BUTTON_WPS 0 +#define RT_N15_GPIO_BUTTON_RESET 12 + +#define RT_N15_GPIO_RTL8366_SCK 2 +#define RT_N15_GPIO_RTL8366_SDA 1 + +#define RT_N15_KEYS_POLL_INTERVAL 20 +#define RT_N15_KEYS_DEBOUNCE_INTERVAL (3 * RT_N15_KEYS_POLL_INTERVAL) + +static struct gpio_led rt_n15_leds_gpio[] __initdata = { + { + .name = "rt-n15:blue:power", + .gpio = RT_N15_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static struct gpio_keys_button rt_n15_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RT_N15_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_N15_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = RT_N15_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_N15_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct rtl8366_platform_data rt_n15_rtl8366s_data = { + .gpio_sda = RT_N15_GPIO_RTL8366_SDA, + .gpio_sck = RT_N15_GPIO_RTL8366_SCK, +}; + +static struct platform_device rt_n15_rtl8366s_device = { + .name = RTL8366S_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &rt_n15_rtl8366s_data, + } +}; + +static void __init rt_n15_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C); + + rt288x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n15_leds_gpio), + rt_n15_leds_gpio); + + ramips_register_gpio_buttons(-1, RT_N15_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rt_n15_gpio_buttons), + rt_n15_gpio_buttons); + + platform_device_register(&rt_n15_rtl8366s_device); + + rt288x_register_wifi(); + + rt288x_eth_data.speed = SPEED_1000; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_register_ethernet(); + rt288x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_RT_N15, "RT-N15", "Asus RT-N15", rt_n15_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-v11st-fe.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-v11st-fe.c new file mode 100644 index 0000000..667fe92 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-v11st-fe.c @@ -0,0 +1,75 @@ +/* + * Ralink V11ST-FE board support + * + * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define V11ST_FE_GPIO_STATUS_LED 12 +#define V11ST_FE_GPIO_BUTTON_WPS 0 + +#define V11ST_FE_KEYS_POLL_INTERVAL 20 +#define V11ST_FE_KEYS_DEBOUNCE_INTERVAL (3 * V11ST_FE_KEYS_POLL_INTERVAL) + +static struct gpio_led v11st_fe_leds_gpio[] __initdata = { + { + .name = "v11st-fe:green:status", + .gpio = V11ST_FE_GPIO_STATUS_LED, + .active_low = 1, + } +}; + +static struct gpio_keys_button v11st_fe_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = V11ST_FE_KEYS_DEBOUNCE_INTERVAL, + .gpio = V11ST_FE_GPIO_BUTTON_WPS, + } +}; + +static void __init rt_v11st_fe_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + + rt288x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(v11st_fe_leds_gpio), + v11st_fe_leds_gpio); + + ramips_register_gpio_buttons(-1, V11ST_FE_KEYS_POLL_INTERVAL, + ARRAY_SIZE(v11st_fe_gpio_buttons), + v11st_fe_gpio_buttons); + + rt288x_register_wifi(); + + /* Board is connected to an IC+ IP175C Fast Ethernet switch */ + rt288x_eth_data.speed = SPEED_100; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_eth_data.phy_mask = BIT(0); + rt288x_register_ethernet(); + + rt288x_register_wdt(); + rt288x_register_pci(); +} + +MIPS_MACHINE(RAMIPS_MACH_V11ST_FE, "V11ST-FE", "Ralink V11ST-FE", rt_v11st_fe_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c new file mode 100644 index 0000000..02fac0b --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c @@ -0,0 +1,102 @@ +/* + * Buffalo WLI-TX4-AG300N board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/ethtool.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define WLI_TX4_AG300N_GPIO_LED_DIAG 10 +#define WLI_TX4_AG300N_GPIO_LED_POWER 12 +#define WLI_TX4_AG300N_GPIO_LED_SECURITY 13 + +#define WLI_TX4_AG300N_GPIO_BUTTON_AOSS 0 +#define WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH 8 +#define WLI_TX4_AG300N_GPIO_BUTTON_RESET 9 + +#define WLI_TX4_AG300N_KEYS_POLL_INTERVAL 20 +#define WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLI_TX4_AG300N_KEYS_POLL_INTERVAL) + +static struct gpio_led wli_tx4_ag300n_leds_gpio[] __initdata = { + { + .name = "buffalo:blue:power", + .gpio = WLI_TX4_AG300N_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "buffalo:red:diag", + .gpio = WLI_TX4_AG300N_GPIO_LED_DIAG, + .active_low = 1, + }, + { + .name = "buffalo:blue:security", + .gpio = WLI_TX4_AG300N_GPIO_LED_SECURITY, + .active_low = 0, + }, +}; + +static struct gpio_keys_button wli_tx4_ag300n_gpio_buttons[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WLI_TX4_AG300N_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "AOSS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WLI_TX4_AG300N_GPIO_BUTTON_AOSS, + .active_low = 1, + }, + { + .desc = "Bandwidth switch", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH, + .active_low = 0, + }, +}; + +static void __init wli_tx4_ag300n_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(wli_tx4_ag300n_leds_gpio), + wli_tx4_ag300n_leds_gpio); + ramips_register_gpio_buttons(-1, WLI_TX4_AG300N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wli_tx4_ag300n_gpio_buttons), + wli_tx4_ag300n_gpio_buttons); + + rt288x_register_flash(0); + rt288x_register_wifi(); + rt288x_register_wdt(); + + rt288x_eth_data.speed = SPEED_100; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_register_ethernet(); +} + +MIPS_MACHINE(RAMIPS_MACH_WLI_TX4_AG300N, "WLI-TX4-AG300N", + "Buffalo WLI-TX4-AG300N", wli_tx4_ag300n_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wzr-agl300nh.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wzr-agl300nh.c new file mode 100644 index 0000000..6bd7a45 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wzr-agl300nh.c @@ -0,0 +1,77 @@ +/* + * Buffalo WZR-AGL300NH board support + * + * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> + +#include "devices.h" + +/* + * MTD layout from stock firmware: + * mtd0: 00030000 00010000 "uboot" + * mtd1: 00010000 00010000 "uboot_environ" + * mtd2: 00010000 00010000 "factory_default" + * mtd3: 000b0000 00010000 "linux" + * mtd4: 002f0000 00010000 "rootfs" + * mtd5: 00010000 00010000 "user_property" + */ + +static struct mtd_partition wzr_agl300nh_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "uboot_environ", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory_default", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "linux", + .offset = 0x050000, + .size = 0x0b0000, + }, { + .name = "rootfs", + .offset = 0x100000, + .size = 0x2f0000, + }, { + .name = "user_property", + .offset = 0x3f0000, + .size = 0x010000, + } +}; + +static void __init wzr_agl300nh_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + + rt288x_flash0_data.nr_parts = ARRAY_SIZE(wzr_agl300nh_partitions); + rt288x_flash0_data.parts = wzr_agl300nh_partitions; + rt288x_register_flash(0); + + rt288x_register_wifi(); + rt288x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_WZR_AGL300NH, "WZR-AGL300NH", + "Buffalo WZR-AGL300NH", wzr_agl300nh_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/rt288x.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/rt288x.c new file mode 100644 index 0000000..c51ad98 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/rt288x.c @@ -0,0 +1,153 @@ +/* + * Ralink RT288x SoC specific setup + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/ramips_gpio.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> + +void __iomem * rt288x_sysc_base; +void __iomem * rt288x_memc_base; + +void __init ramips_soc_prom_init(void) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE); + u32 n0; + u32 n1; + u32 id; + + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); + n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); + id = __raw_readl(sysc + SYSC_REG_CHIP_ID); + + snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN, + "Ralink %c%c%c%c%c%c%c%c id:%u rev:%u", + (char) (n0 & 0xff), (char) ((n0 >> 8) & 0xff), + (char) ((n0 >> 16) & 0xff), (char) ((n0 >> 24) & 0xff), + (char) (n1 & 0xff), (char) ((n1 >> 8) & 0xff), + (char) ((n1 >> 16) & 0xff), (char) ((n1 >> 24) & 0xff), + (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, + (id & CHIP_ID_REV_MASK)); + + ramips_mem_base = RT2880_SDRAM_BASE; + ramips_mem_size_min = RT288X_MEM_SIZE_MIN; + ramips_mem_size_max = RT288X_MEM_SIZE_MAX; +} + +static struct ramips_gpio_chip rt288x_gpio_chips[] = { + { + .chip = { + .label = "RT288X-GPIO0", + .base = 0, + .ngpio = 24, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x00, + [RAMIPS_GPIO_REG_EDGE] = 0x04, + [RAMIPS_GPIO_REG_RENA] = 0x08, + [RAMIPS_GPIO_REG_FENA] = 0x0c, + [RAMIPS_GPIO_REG_DATA] = 0x20, + [RAMIPS_GPIO_REG_DIR] = 0x24, + [RAMIPS_GPIO_REG_POL] = 0x28, + [RAMIPS_GPIO_REG_SET] = 0x2c, + [RAMIPS_GPIO_REG_RESET] = 0x30, + [RAMIPS_GPIO_REG_TOGGLE] = 0x34, + }, + .map_base = RT2880_PIO_BASE, + .map_size = RT2880_PIO_SIZE, + }, + { + .chip = { + .label = "RT288X-GPIO1", + .base = 24, + .ngpio = 16, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x38, + [RAMIPS_GPIO_REG_EDGE] = 0x3c, + [RAMIPS_GPIO_REG_RENA] = 0x40, + [RAMIPS_GPIO_REG_FENA] = 0x44, + [RAMIPS_GPIO_REG_DATA] = 0x48, + [RAMIPS_GPIO_REG_DIR] = 0x4c, + [RAMIPS_GPIO_REG_POL] = 0x50, + [RAMIPS_GPIO_REG_SET] = 0x54, + [RAMIPS_GPIO_REG_RESET] = 0x58, + [RAMIPS_GPIO_REG_TOGGLE] = 0x5c, + }, + .map_base = RT2880_PIO_BASE, + .map_size = RT2880_PIO_SIZE, + }, + { + .chip = { + .label = "RT288X-GPIO2", + .base = 40, + .ngpio = 32, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x60, + [RAMIPS_GPIO_REG_EDGE] = 0x64, + [RAMIPS_GPIO_REG_RENA] = 0x68, + [RAMIPS_GPIO_REG_FENA] = 0x6c, + [RAMIPS_GPIO_REG_DATA] = 0x70, + [RAMIPS_GPIO_REG_DIR] = 0x74, + [RAMIPS_GPIO_REG_POL] = 0x78, + [RAMIPS_GPIO_REG_SET] = 0x7c, + [RAMIPS_GPIO_REG_RESET] = 0x80, + [RAMIPS_GPIO_REG_TOGGLE] = 0x84, + }, + .map_base = RT2880_PIO_BASE, + .map_size = RT2880_PIO_SIZE, + }, +}; + +static struct ramips_gpio_data rt288x_gpio_data = { + .chips = rt288x_gpio_chips, + .num_chips = ARRAY_SIZE(rt288x_gpio_chips), +}; + +static void rt288x_gpio_reserve(int first, int last) +{ + for (; first <= last; first++) + gpio_request(first, "reserved"); +} + +void __init rt288x_gpio_init(u32 mode) +{ + rt288x_sysc_wr(mode, SYSC_REG_GPIO_MODE); + + ramips_gpio_init(&rt288x_gpio_data); + if ((mode & RT2880_GPIO_MODE_I2C) == 0) + rt288x_gpio_reserve(1, 2); + + if ((mode & RT2880_GPIO_MODE_SPI) == 0) + rt288x_gpio_reserve(3, 6); + + if ((mode & RT2880_GPIO_MODE_UART0) == 0) + rt288x_gpio_reserve(7, 14); + + if ((mode & RT2880_GPIO_MODE_JTAG) == 0) + rt288x_gpio_reserve(17, 21); + + if ((mode & RT2880_GPIO_MODE_MDIO) == 0) + rt288x_gpio_reserve(22, 23); + + if ((mode & RT2880_GPIO_MODE_SDRAM) == 0) + rt288x_gpio_reserve(24, 39); + + if ((mode & RT2880_GPIO_MODE_PCI) == 0) + rt288x_gpio_reserve(40, 71); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c new file mode 100644 index 0000000..be474b5 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c @@ -0,0 +1,88 @@ +/* + * Ralink RT288x SoC specific setup + * + * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mips_machine.h> +#include <asm/reboot.h> +#include <asm/time.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include "common.h" + +static void rt288x_restart(char *command) +{ + rt288x_sysc_wr(RT2880_RESET_SYSTEM, SYSC_REG_RESET_CTRL); + while (1) + if (cpu_wait) + cpu_wait(); +} + +static void rt288x_halt(void) +{ + while (1) + cpu_wait(); +} + +unsigned int __cpuinit get_c0_compare_irq(void) +{ + return CP0_LEGACY_COMPARE_IRQ; +} + +void __init ramips_soc_setup(void) +{ + struct clk *clk; + + rt288x_sysc_base = ioremap_nocache(RT2880_SYSC_BASE, RT2880_SYSC_SIZE); + rt288x_memc_base = ioremap_nocache(RT2880_MEMC_BASE, RT2880_MEMC_SIZE); + + rt288x_clocks_init(); + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type, + clk_get_rate(clk) / 1000000, + (clk_get_rate(clk) % 1000000) * 100 / 1000000); + + _machine_restart = rt288x_restart; + _machine_halt = rt288x_halt; + pm_power_off = rt288x_halt; + + clk = clk_get(NULL, "uart"); + if (IS_ERR(clk)) + panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); + + ramips_early_serial_setup(0, RT2880_UART0_BASE, clk_get_rate(clk), + RT2880_INTC_IRQ_UART0); + ramips_early_serial_setup(1, RT2880_UART1_BASE, clk_get_rate(clk), + RT2880_INTC_IRQ_UART1); +} + +void __init plat_time_init(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + mips_hpt_frequency = clk_get_rate(clk) / 2; +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Kconfig new file mode 100644 index 0000000..700a983 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Kconfig @@ -0,0 +1,219 @@ +if RALINK_RT305X + +menu "Ralink RT350x machine selection" + +config RT305X_MACH_CARAMBOLA + bool "8devices Carambola dev board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_3G_6200N + bool "Edimax 3G-6200N board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_3G300M + bool "Tenda 3G300M board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_BR6425 + bool "Edimax BR-6425 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WR6202 + bool "Accton WR6202" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_AIR3GII + bool "AirLive Air3GII board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_ALL0256N + bool "Allnet ALL0256N support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_ALL5002 + bool "Allnet ALL5002 support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_W502U + bool "ALFA Networks W502U board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_ARGUS_ATP52B + bool "Argus ATP-52B support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_RT_G32_REVB + bool "Asus RT-G32 revB board support" + select RALINK_DEV_GPIO_BUTTONS + +config RT305X_MACH_RT_N10_PLUS + bool "Asus RT-N10+ board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WL_330N + bool "Asus WL-330N board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WL_330N3G + bool "Asus WL-330N3G board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_HW550_3G + bool "Aztech HW550-3G support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_F5D8235_V2 + bool "Belkin F5D8235 v2 support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WHR_G300N + bool "Buffalo WHR-G300N support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_DIR_300_REVB + bool "D-Link DIR-300 revB board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_DIR_615_H1 + bool "D-Link DIR-615 H1 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_DAP_1350 + bool "D-Link DAP-1350 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_ESR_9753 + bool "EnGenius ESR-9753 support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_BROADWAY + bool "Hauppauge Broadway support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_FONERA20N + bool "La Fonera20N board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_RT_N13U + bool "ASUS RT-N13U board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_FREESTATION5 + bool "ARC FreeStation5" + +config RT305X_MACH_MOFI3500_3GN + bool "MoFi Network MOFI3500-3GN support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WR512_3GN + bool "SH-WR512NU/WS-WR512N1-like 3GN router" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_UR_326N4G + bool "UR-326N4G Wireless N router" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_UR_336UN + bool "UR-336UN Wireless N router" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_NW718 + bool "Netcore NW718" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_BC2 + bool "NexAira BC2" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_OMNI_EMB + bool "Omnima MiniEMBWiFi" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_PSR_680W + bool "Petatel PSR-680W Wireless 3G Router support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_PWH2004 + bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_V22RW_2X2 + bool "Ralink AP-RT3052-V22RW-2X2 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_W306R_V20 + bool "Tenda W306R V2.0 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WL341V3 + bool "Sitecom WL-341 v3 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WL351 + bool "Sitecom WL-351 support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_SL_R7205 + bool "Skyline SL-R7205 Wireless 3G Router support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WCR150GN + bool "Sparklan WCR-150GN support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_NBG_419N + bool "ZyXEL NBG-419N support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_MZKW300NH2 + bool "Planex MZK-W300NH2 Router support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_XDX_RN502J + bool "Unknown board XDX-RN502J" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +endmenu + +endif diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Makefile new file mode 100644 index 0000000..47e9ce5 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Makefile @@ -0,0 +1,56 @@ +# +# Makefile for the Ralink RT305x SoC specific parts of the kernel +# +# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation. + +obj-y := irq.o setup.o devices.o rt305x.o clock.o + +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-$(CONFIG_RT305X_MACH_3G_6200N) += mach-3g-6200n.o +obj-$(CONFIG_RT305X_MACH_3G300M) += mach-3g300m.o +obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o +obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o +obj-$(CONFIG_RT305X_MACH_AIR3GII) += mach-air3gii.o +obj-$(CONFIG_RT305X_MACH_ALL0256N) += mach-all0256n.o +obj-$(CONFIG_RT305X_MACH_ALL5002) += mach-all5002.o +obj-$(CONFIG_RT305X_MACH_BR6425) += mach-br6425.o +obj-$(CONFIG_RT305X_MACH_BROADWAY) += mach-broadway.o +obj-$(CONFIG_RT305X_MACH_CARAMBOLA) += mach-carambola.o +obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o +obj-$(CONFIG_RT305X_MACH_DIR_615_H1) += mach-dir-615-h1.o +obj-$(CONFIG_RT305X_MACH_DAP_1350) += mach-dap-1350.o +obj-$(CONFIG_RT305X_MACH_ESR_9753) += mach-esr-9753.o +obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o +obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o +obj-$(CONFIG_RT305X_MACH_RT_N13U) += mach-rt-n13u.o +obj-$(CONFIG_RT305X_MACH_FREESTATION5) += mach-freestation5.o +obj-$(CONFIG_RT305X_MACH_HW550_3G) += mach-hw550-3g.o +obj-$(CONFIG_RT305X_MACH_MOFI3500_3GN) += mach-mofi3500-3gn.o +obj-$(CONFIG_RT305X_MACH_NBG_419N) += mach-nbg-419n.o +obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o +obj-$(CONFIG_RT305X_MACH_OMNI_EMB) += mach-omni-emb.o +obj-$(CONFIG_RT305X_MACH_PSR_680W) += mach-psr-680w.o +obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o +obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o +obj-$(CONFIG_RT305X_MACH_RT_N10_PLUS) += mach-rt-n10-plus.o +obj-$(CONFIG_RT305X_MACH_SL_R7205) += mach-sl-r7205.o +obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o +obj-$(CONFIG_RT305X_MACH_W306R_V20) += mach-w306r-v20.o +obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o +obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o +obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o +obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o +obj-$(CONFIG_RT305X_MACH_UR_326N4G) += mach-ur-326n4g.o +obj-$(CONFIG_RT305X_MACH_UR_336UN) += mach-ur-336un.o +obj-$(CONFIG_RT305X_MACH_WL_330N) += mach-wl-330n.o +obj-$(CONFIG_RT305X_MACH_WL_330N3G) += mach-wl-330n3g.o +obj-$(CONFIG_RT305X_MACH_WL341V3) += mach-wl341v3.o +obj-$(CONFIG_RT305X_MACH_WL351) += mach-wl351.o +obj-$(CONFIG_RT305X_MACH_WR6202) += mach-wr6202.o +obj-$(CONFIG_RT305X_MACH_MZKW300NH2) += mach-mzk-w300nh2.o +obj-$(CONFIG_RT305X_MACH_XDX_RN502J) += mach-xdx-rn502j.o diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/clock.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/clock.c new file mode 100644 index 0000000..c46a174 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/clock.c @@ -0,0 +1,133 @@ +/* + * Ralink RT305X clock API + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> +#include "common.h" + +struct clk { + unsigned long rate; +}; + +static struct clk rt305x_cpu_clk; +static struct clk rt305x_sys_clk; +static struct clk rt305x_wdt_clk; +static struct clk rt305x_uart_clk; + +void __init rt305x_clocks_init(void) +{ + u32 t; + + t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG); + + if (soc_is_rt305x() || soc_is_rt3350()) { + t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) & + RT305X_SYSCFG_CPUCLK_MASK; + switch (t) { + case RT305X_SYSCFG_CPUCLK_LOW: + rt305x_cpu_clk.rate = 320000000; + break; + case RT305X_SYSCFG_CPUCLK_HIGH: + rt305x_cpu_clk.rate = 384000000; + break; + } + rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3; + rt305x_uart_clk.rate = rt305x_sys_clk.rate; + rt305x_wdt_clk.rate = rt305x_sys_clk.rate; + } else if (soc_is_rt3352()) { + t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) & + RT3352_SYSCFG0_CPUCLK_MASK; + switch (t) { + case RT3352_SYSCFG0_CPUCLK_LOW: + rt305x_cpu_clk.rate = 384000000; + break; + case RT3352_SYSCFG0_CPUCLK_HIGH: + rt305x_cpu_clk.rate = 400000000; + break; + } + rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3; + rt305x_uart_clk.rate = 40000000; + rt305x_wdt_clk.rate = rt305x_sys_clk.rate; + } else if (soc_is_rt5350()) { + t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) & + RT5350_SYSCFG0_CPUCLK_MASK; + switch (t) { + case RT5350_SYSCFG0_CPUCLK_360: + rt305x_cpu_clk.rate = 360000000; + rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3; + break; + case RT5350_SYSCFG0_CPUCLK_320: + rt305x_cpu_clk.rate = 320000000; + rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 4; + break; + case RT5350_SYSCFG0_CPUCLK_300: + rt305x_cpu_clk.rate = 300000000; + rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3; + break; + default: + BUG(); + } + rt305x_uart_clk.rate = 40000000; + rt305x_wdt_clk.rate = rt305x_sys_clk.rate; + } else { + BUG(); + } + +} + +/* + * Linux clock API + */ +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "sys")) + return &rt305x_sys_clk; + + if (!strcmp(id, "cpu")) + return &rt305x_cpu_clk; + + if (!strcmp(id, "wdt")) + return &rt305x_wdt_clk; + + if (!strcmp(id, "uart")) + return &rt305x_uart_clk; + + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/common.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/common.h new file mode 100644 index 0000000..48ac43e --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/common.h @@ -0,0 +1,16 @@ +/* + * Ralink RT305x SoC common defines + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT305X_COMMON_H +#define _RT305X_COMMON_H + +void rt305x_clocks_init(void); + +#endif /* _RT305X_COMMON_H */
\ No newline at end of file diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.c new file mode 100644 index 0000000..f16ba6d --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.c @@ -0,0 +1,428 @@ +/* + * Ralink RT305x SoC platform device registration + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/rt2x00_platform.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> + +#include <asm/addrspace.h> + +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> +#include "devices.h" + +#include <ramips_eth_platform.h> +#include <rt305x_esw_platform.h> + +static struct resource rt305x_flash0_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = KSEG1ADDR(RT305X_FLASH0_BASE), + .end = KSEG1ADDR(RT305X_FLASH0_BASE) + + RT305X_FLASH0_SIZE - 1, + }, +}; + +struct physmap_flash_data rt305x_flash0_data; +static struct platform_device rt305x_flash0_device = { + .name = "physmap-flash", + .resource = rt305x_flash0_resources, + .num_resources = ARRAY_SIZE(rt305x_flash0_resources), + .dev = { + .platform_data = &rt305x_flash0_data, + }, +}; + +static struct resource rt305x_flash1_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = KSEG1ADDR(RT305X_FLASH1_BASE), + .end = KSEG1ADDR(RT305X_FLASH1_BASE) + + RT305X_FLASH1_SIZE - 1, + }, +}; + +struct physmap_flash_data rt305x_flash1_data; +static struct platform_device rt305x_flash1_device = { + .name = "physmap-flash", + .resource = rt305x_flash1_resources, + .num_resources = ARRAY_SIZE(rt305x_flash1_resources), + .dev = { + .platform_data = &rt305x_flash1_data, + }, +}; + +static int rt305x_flash_instance __initdata; +void __init rt305x_register_flash(unsigned int id) +{ + struct platform_device *pdev; + struct physmap_flash_data *pdata; + u32 t; + int reg; + + switch (id) { + case 0: + pdev = &rt305x_flash0_device; + reg = MEMC_REG_FLASH_CFG0; + break; + case 1: + pdev = &rt305x_flash1_device; + reg = MEMC_REG_FLASH_CFG1; + break; + default: + return; + } + + t = rt305x_memc_rr(reg); + t = (t >> FLASH_CFG_WIDTH_SHIFT) & FLASH_CFG_WIDTH_MASK; + + pdata = pdev->dev.platform_data; + switch (t) { + case FLASH_CFG_WIDTH_8BIT: + pdata->width = 1; + break; + case FLASH_CFG_WIDTH_16BIT: + pdata->width = 2; + break; + case FLASH_CFG_WIDTH_32BIT: + pdata->width = 4; + break; + default: + printk(KERN_ERR "RT305x: flash bank%u witdh is invalid\n", id); + return; + } + + pdev->id = rt305x_flash_instance; + + platform_device_register(pdev); + rt305x_flash_instance++; +} + +static void rt305x_fe_reset(void) +{ + u32 reset_bits = RT305X_RESET_FE; + + if (soc_is_rt5350()) + reset_bits |= RT305X_RESET_ESW; + rt305x_sysc_wr(reset_bits, SYSC_REG_RESET_CTRL); + rt305x_sysc_wr(0, SYSC_REG_RESET_CTRL); +} + +static struct resource rt305x_eth_resources[] = { + { + .start = RT305X_FE_BASE, + .end = RT305X_FE_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT305X_CPU_IRQ_FE, + .end = RT305X_CPU_IRQ_FE, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct ramips_eth_platform_data ramips_eth_data = { + .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 }, + .reset_fe = rt305x_fe_reset, + .min_pkt_len = 64, +}; + +static struct platform_device rt305x_eth_device = { + .name = "ramips_eth", + .resource = rt305x_eth_resources, + .num_resources = ARRAY_SIZE(rt305x_eth_resources), + .dev = { + .platform_data = &ramips_eth_data, + } +}; + +static struct resource rt305x_esw_resources[] = { + { + .start = RT305X_SWITCH_BASE, + .end = RT305X_SWITCH_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct rt305x_esw_platform_data rt305x_esw_data = { + /* All ports are LAN ports. */ + .vlan_config = RT305X_ESW_VLAN_CONFIG_NONE, + .reg_initval_fct2 = 0x00d6500c, + /* + * ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1, + * turbo mii off, rgmi 3.3v off + * port5: disabled + * port6: enabled, gige, full-duplex, rx/tx-flow-control + */ + .reg_initval_fpa2 = 0x3f502b28, +}; + +static struct platform_device rt305x_esw_device = { + .name = "rt305x-esw", + .resource = rt305x_esw_resources, + .num_resources = ARRAY_SIZE(rt305x_esw_resources), + .dev = { + .platform_data = &rt305x_esw_data, + } +}; + +void __init rt305x_register_ethernet(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "sys"); + if (IS_ERR(clk)) + panic("unable to get SYS clock, err=%ld", PTR_ERR(clk)); + + ramips_eth_data.sys_freq = clk_get_rate(clk); + + platform_device_register(&rt305x_esw_device); + platform_device_register(&rt305x_eth_device); +} + +static struct resource rt305x_wifi_resources[] = { + { + .start = RT305X_WMAC_BASE, + .end = RT305X_WMAC_BASE + 0x3FFFF, + .flags = IORESOURCE_MEM, + }, { + .start = RT305X_CPU_IRQ_WNIC, + .end = RT305X_CPU_IRQ_WNIC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct rt2x00_platform_data rt305x_wifi_data; +static struct platform_device rt305x_wifi_device = { + .name = "rt2800_wmac", + .resource = rt305x_wifi_resources, + .num_resources = ARRAY_SIZE(rt305x_wifi_resources), + .dev = { + .platform_data = &rt305x_wifi_data, + } +}; + +void __init rt305x_register_wifi(void) +{ + u32 t; + + rt305x_wifi_data.eeprom_file_name = "soc_wmac.eeprom"; + + if (soc_is_rt3352() || soc_is_rt5350()) { + t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG); + t &= RT3352_SYSCFG0_XTAL_SEL; + if (!t) + rt305x_wifi_data.clk_is_20mhz = 1; + } + platform_device_register(&rt305x_wifi_device); +} + +static struct resource rt305x_wdt_resources[] = { + { + .start = RT305X_TIMER_BASE, + .end = RT305X_TIMER_BASE + RT305X_TIMER_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rt305x_wdt_device = { + .name = "ramips-wdt", + .id = -1, + .resource = rt305x_wdt_resources, + .num_resources = ARRAY_SIZE(rt305x_wdt_resources), +}; + +void __init rt305x_register_wdt(void) +{ + u32 t; + + /* enable WDT reset output on pin SRAM_CS_N */ + t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG); + t |= RT305X_SYSCFG_SRAM_CS0_MODE_WDT << + RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT; + rt305x_sysc_wr(t, SYSC_REG_SYSTEM_CONFIG); + + platform_device_register(&rt305x_wdt_device); +} + +static struct resource rt305x_spi_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = RT305X_SPI_BASE, + .end = RT305X_SPI_BASE + RT305X_SPI_SIZE - 1, + }, +}; + +static struct platform_device rt305x_spi_device = { + .name = "ramips-spi", + .id = 0, + .resource = rt305x_spi_resources, + .num_resources = ARRAY_SIZE(rt305x_spi_resources), +}; + +void __init rt305x_register_spi(struct spi_board_info *info, int n) +{ + spi_register_board_info(info, n); + platform_device_register(&rt305x_spi_device); +} + +static struct resource rt305x_dwc_otg_resources[] = { + { + .start = RT305X_OTG_BASE, + .end = RT305X_OTG_BASE + 0x3FFFF, + .flags = IORESOURCE_MEM, + }, { + .start = RT305X_INTC_IRQ_OTG, + .end = RT305X_INTC_IRQ_OTG, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rt305x_dwc_otg_device = { + .name = "dwc_otg", + .resource = rt305x_dwc_otg_resources, + .num_resources = ARRAY_SIZE(rt305x_dwc_otg_resources), + .dev = { + .platform_data = NULL, + } +}; + +static atomic_t rt3352_usb_pwr_ref = ATOMIC_INIT(0); + +static int rt3352_usb_power_on(struct platform_device *pdev) +{ + + if (atomic_inc_return(&rt3352_usb_pwr_ref) == 1) { + u32 t; + + t = rt305x_sysc_rr(RT3352_SYSC_REG_USB_PS); + + /* enable clock for port0's and port1's phys */ + t = rt305x_sysc_rr(RT3352_SYSC_REG_CLKCFG1); + t |= RT3352_CLKCFG1_UPHY0_CLK_EN | RT3352_CLKCFG1_UPHY1_CLK_EN; + rt305x_sysc_wr(t, RT3352_SYSC_REG_CLKCFG1); + mdelay(500); + + /* pull USBHOST and USBDEV out from reset */ + t = rt305x_sysc_rr(RT3352_SYSC_REG_RSTCTRL); + t &= ~(RT3352_RSTCTRL_UHST | RT3352_RSTCTRL_UDEV); + rt305x_sysc_wr(t, RT3352_SYSC_REG_RSTCTRL); + mdelay(500); + + /* enable host mode */ + t = rt305x_sysc_rr(RT3352_SYSC_REG_SYSCFG1); + t |= RT3352_SYSCFG1_USB0_HOST_MODE; + rt305x_sysc_wr(t, RT3352_SYSC_REG_SYSCFG1); + + t = rt305x_sysc_rr(RT3352_SYSC_REG_USB_PS); + } + + return 0; +} + +static void rt3352_usb_power_off(struct platform_device *pdev) +{ + + if (atomic_dec_return(&rt3352_usb_pwr_ref) == 0) { + u32 t; + + /* put USBHOST and USBDEV into reset */ + t = rt305x_sysc_rr(RT3352_SYSC_REG_RSTCTRL); + t |= RT3352_RSTCTRL_UHST | RT3352_RSTCTRL_UDEV; + rt305x_sysc_wr(t, RT3352_SYSC_REG_RSTCTRL); + udelay(10000); + + /* disable clock for port0's and port1's phys*/ + t = rt305x_sysc_rr(RT3352_SYSC_REG_CLKCFG1); + t &= ~(RT3352_CLKCFG1_UPHY0_CLK_EN | RT3352_CLKCFG1_UPHY1_CLK_EN); + rt305x_sysc_wr(t, RT3352_SYSC_REG_CLKCFG1); + udelay(10000); + } +} + +static struct usb_ehci_pdata rt3352_ehci_data = { + .power_on = rt3352_usb_power_on, + .power_off = rt3352_usb_power_off, +}; + +static struct resource rt3352_ehci_resources[] = { + { + .start = RT3352_EHCI_BASE, + .end = RT3352_EHCI_BASE + RT3352_EHCI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT305X_INTC_IRQ_OTG, + .end = RT305X_INTC_IRQ_OTG, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 rt3352_ehci_dmamask = DMA_BIT_MASK(32); +static struct platform_device rt3352_ehci_device = { + .name = "ehci-platform", + .id = -1, + .resource = rt3352_ehci_resources, + .num_resources = ARRAY_SIZE(rt3352_ehci_resources), + .dev = { + .dma_mask = &rt3352_ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &rt3352_ehci_data, + }, +}; + +static struct resource rt3352_ohci_resources[] = { + { + .start = RT3352_OHCI_BASE, + .end = RT3352_OHCI_BASE + RT3352_OHCI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT305X_INTC_IRQ_OTG, + .end = RT305X_INTC_IRQ_OTG, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct usb_ohci_pdata rt3352_ohci_data = { + .power_on = rt3352_usb_power_on, + .power_off = rt3352_usb_power_off, +}; + +static u64 rt3352_ohci_dmamask = DMA_BIT_MASK(32); +static struct platform_device rt3352_ohci_device = { + .name = "ohci-platform", + .id = -1, + .resource = rt3352_ohci_resources, + .num_resources = ARRAY_SIZE(rt3352_ohci_resources), + .dev = { + .dma_mask = &rt3352_ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &rt3352_ohci_data, + }, +}; + +void __init rt305x_register_usb(void) +{ + if (soc_is_rt305x() || soc_is_rt3350()) { + platform_device_register(&rt305x_dwc_otg_device); + } else if (soc_is_rt3352() || soc_is_rt5350()) { + platform_device_register(&rt3352_ehci_device); + platform_device_register(&rt3352_ohci_device); + } else { + BUG(); + } +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.h new file mode 100644 index 0000000..22c9ce4 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.h @@ -0,0 +1,32 @@ +/* + * Ralink RT305x SoC specific platform device definitions + * + * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __RT305X_DEVICES_H +#define __RT305X_DEVICES_H + +#include <asm/mach-ralink/rt305x_esw_platform.h> + +struct physmap_flash_data; +struct spi_board_info; + +extern struct physmap_flash_data rt305x_flash0_data; +extern struct physmap_flash_data rt305x_flash1_data; + +extern struct rt305x_esw_platform_data rt305x_esw_data; + +void rt305x_register_flash(unsigned int id); +void rt305x_register_ethernet(void); +void rt305x_register_wifi(void); +void rt305x_register_wdt(void); +void rt305x_register_spi(struct spi_board_info *info, int n); +void rt305x_register_usb(void); + +#endif /* __RT305X_DEVICES_H */ + diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/early_printk.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/early_printk.c new file mode 100644 index 0000000..602df86 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/early_printk.c @@ -0,0 +1,29 @@ +/* + * Ralink RT305x SoC early printk support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/serial_reg.h> + +#include <asm/addrspace.h> + +#include <asm/mach-ralink/rt305x_regs.h> + +#define UART_READ(r) \ + __raw_readl((void __iomem *)(KSEG1ADDR(RT305X_UART1_BASE) + 4 * (r))) + +#define UART_WRITE(r, v) \ + __raw_writel((v), (void __iomem *)(KSEG1ADDR(RT305X_UART1_BASE) + 4 * (r))) + +void prom_putchar(unsigned char ch) +{ + while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0); + UART_WRITE(UART_REG_TX, ch); + while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/irq.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/irq.c new file mode 100644 index 0000000..fcac2dd --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/irq.c @@ -0,0 +1,82 @@ +/* + * Ralink RT305x SoC specific interrupt handling + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +static void rt305x_intc_irq_dispatch(void) +{ + u32 pending; + + pending = ramips_intc_get_status(); + + if (pending & RT305X_INTC_INT_TIMER0) + do_IRQ(RT305X_INTC_IRQ_TIMER0); + + else if (pending & RT305X_INTC_INT_TIMER1) + do_IRQ(RT305X_INTC_IRQ_TIMER1); + + else if (pending & RT305X_INTC_INT_UART0) + do_IRQ(RT305X_INTC_IRQ_UART0); + + else if (pending & RT305X_INTC_INT_UART1) + do_IRQ(RT305X_INTC_IRQ_UART1); + + else if (pending & RT305X_INTC_INT_PERFC) + do_IRQ(RT305X_INTC_IRQ_PERFC); + + else if (pending & RT305X_INTC_INT_OTG) + do_IRQ(RT305X_INTC_IRQ_OTG); + + /* TODO: handle PIO interrupts as well */ + + else + spurious_interrupt(); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long pending; + + pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) + do_IRQ(RT305X_CPU_IRQ_COUNTER); + + else if (pending & STATUSF_IP5) + do_IRQ(RT305X_CPU_IRQ_FE); + + else if (pending & STATUSF_IP6) + do_IRQ(RT305X_CPU_IRQ_WNIC); + + else if (pending & STATUSF_IP2) + rt305x_intc_irq_dispatch(); + + else + spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(); + ramips_intc_irq_init(RT305X_INTC_BASE, RT305X_CPU_IRQ_INTC, + RT305X_INTC_IRQ_BASE); + + cp0_perfcount_irq = RT305X_INTC_IRQ_PERFC; +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g-6200n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g-6200n.c new file mode 100644 index 0000000..ade4fe9 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g-6200n.c @@ -0,0 +1,86 @@ +/* + * Edimax 3g-6200n board support + * + * Copyright (C) 2011 Andrzej Hajda <andrzej.hajda@wp.pl> + * Copyright (C) 2012 Lukasz Golebiowski <lgolebio@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define EDIMAX_GPIO_BUTTON_WPS 12 +#define EDIMAX_GPIO_BTN_0 13 /* Wifi on/off switch button */ + +#define EDIMAX_GPIO_LED_POWER 9 +#define EDIMAX_GPIO_LED_WLAN 14 +#define EDIMAX_GPIO_LED_3G 7 + +#define EDIMAX_KEYS_POLL_INTERVAL 20 +#define EDIMAX_KEYS_DEBOUNCE_INTERVAL (3 * EDIMAX_KEYS_POLL_INTERVAL) + +static struct gpio_led edimax_leds_gpio[] __initdata = { + { + .name = "edimax:green:power", + .gpio = EDIMAX_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "edimax:amber:wlan", + .gpio = EDIMAX_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "edimax:blue:3g", + .gpio = EDIMAX_GPIO_LED_3G, + .active_low = 1, + } +}; + +static struct gpio_keys_button edimax_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = EDIMAX_KEYS_DEBOUNCE_INTERVAL, + .gpio = EDIMAX_GPIO_BUTTON_WPS, + .active_low = 1, + }, { + .desc = "wlanswitch", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = EDIMAX_KEYS_DEBOUNCE_INTERVAL, + .gpio = EDIMAX_GPIO_BTN_0, + .active_low = 1, + } +}; + +static void __init edimax_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(edimax_leds_gpio), + edimax_leds_gpio); + ramips_register_gpio_buttons(-1, EDIMAX_KEYS_POLL_INTERVAL, + ARRAY_SIZE(edimax_gpio_buttons), + edimax_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_3G_6200N, "3G-6200N", "Edimax 3g-6200n", + edimax_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g300m.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g300m.c new file mode 100644 index 0000000..e4993b3 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g300m.c @@ -0,0 +1,126 @@ +/* + * Tenda 3G300M board support + * + * Copyright (C) 2013 Cezary Jackiewicz <cezary.jackiewicz@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/gpio.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define TENDA_3G300M_GPIO_BUTTON_RESET 0 +#define TENDA_3G300M_GPIO_BUTTON_MODE 10 + +#define TENDA_3G300M_GPIO_LED_3GROUTER 11 +#define TENDA_3G300M_GPIO_LED_AP 12 +#define TENDA_3G300M_GPIO_LED_WISPROUTER 9 +#define TENDA_3G300M_GPIO_LED_WIRELESSROUTER 13 +#define TENDA_3G300M_GPIO_LED_3G 7 +#define TENDA_3G300M_GPIO_LED_WPSRESET 14 + +#define TENDA_3G300M_KEYS_POLL_INTERVAL 20 +#define TENDA_3G300M_KEYS_DEBOUNCE_INTERVAL (3 * TENDA_3G300M_KEYS_POLL_INTERVAL) + +const struct flash_platform_data tenda_3g300m_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info tenda_3g300m_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &tenda_3g300m_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + } +}; + +static struct gpio_led tenda_3g300m_leds_gpio[] __initdata = { + { + .name = "tenda:blue:3grouter", + .gpio = TENDA_3G300M_GPIO_LED_3GROUTER, + .active_low = 1, + },{ + .name = "tenda:blue:ap", + .gpio = TENDA_3G300M_GPIO_LED_AP, + .active_low = 1, + },{ + .name = "tenda:blue:wisprouter", + .gpio = TENDA_3G300M_GPIO_LED_WISPROUTER, + .active_low = 1, + },{ + .name = "tenda:blue:wirelessrouter", + .gpio = TENDA_3G300M_GPIO_LED_WIRELESSROUTER, + .active_low = 1, + },{ + .name = "tenda:blue:3g", + .gpio = TENDA_3G300M_GPIO_LED_3G, + .active_low = 1, + },{ + .name = "tenda:blue:wpsreset", + .gpio = TENDA_3G300M_GPIO_LED_WPSRESET, + .active_low = 1, + } +}; + +static struct gpio_keys_button tenda_3g300m_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TENDA_3G300M_KEYS_DEBOUNCE_INTERVAL, + .gpio = TENDA_3G300M_GPIO_BUTTON_RESET, + .active_low = 1, + },{ + .desc = "mode", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = TENDA_3G300M_KEYS_DEBOUNCE_INTERVAL, + .gpio = TENDA_3G300M_GPIO_BUTTON_MODE, + .active_low = 1, + } +}; + +static void __init tenda_3g300m_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT) | + RT305X_GPIO_MODE_JTAG); + + rt305x_register_spi(tenda_3g300m_spi_slave_info, + ARRAY_SIZE(tenda_3g300m_spi_slave_info)); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(tenda_3g300m_leds_gpio), + tenda_3g300m_leds_gpio); + + ramips_register_gpio_buttons(-1, TENDA_3G300M_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tenda_3g300m_gpio_buttons), + tenda_3g300m_gpio_buttons); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + + rt305x_register_wifi(); + + rt305x_register_wdt(); + + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_3G300M, "3G300M", "Tenda 3G300M", + tenda_3g300m_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-air3gii.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-air3gii.c new file mode 100644 index 0000000..aca238a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-air3gii.c @@ -0,0 +1,94 @@ +/* + * AirLive Air3GII board support + * + * Copyright (C) 2012 Cezary Jackiewicz <cezary.jackiewicz@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define AIR3GII_GPIO_BUTTON_WPS 7 + +#define AIR3GII_GPIO_LED_WLAN 8 +#define AIR3GII_GPIO_LED_MOBILE 9 + +#define AIR3GII_KEYS_POLL_INTERVAL 20 +#define AIR3GII_KEYS_DEBOUNCE_INTERVAL (3 * AIR3GII_KEYS_POLL_INTERVAL) + +const struct flash_platform_data air3gii_flash = { + .type = "en25q32b", +}; + +struct spi_board_info air3gii_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &air3gii_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_led air3gii_leds_gpio[] __initdata = { + { + .name = "airlive:green:wlan", + .gpio = AIR3GII_GPIO_LED_WLAN, + .active_low = 0, + }, { + .name = "airlive:green:mobile", + .gpio = AIR3GII_GPIO_LED_MOBILE, + .active_low = 1, + } +}; + +static struct gpio_keys_button air3gii_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = AIR3GII_KEYS_DEBOUNCE_INTERVAL, + .gpio = AIR3GII_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init air3gii_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_spi(air3gii_spi_slave_info, + ARRAY_SIZE(air3gii_spi_slave_info)); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(air3gii_leds_gpio), + air3gii_leds_gpio); + + ramips_register_gpio_buttons(-1, AIR3GII_KEYS_POLL_INTERVAL, + ARRAY_SIZE(air3gii_gpio_buttons), + air3gii_gpio_buttons); + + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_AIR3GII, "AIR3GII", "AirLive Air3GII", + air3gii_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all0256n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all0256n.c new file mode 100644 index 0000000..7f5e00b --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all0256n.c @@ -0,0 +1,90 @@ +/* + * Allnet ALL0256N board support + * + * Copyright (C) 2012 Daniel Golle <dgolle@allnet.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define ALL0256N_GPIO_BUTTON_RESET 0 +#define ALL0256N_GPIO_LED_RSSI_LOW 14 +#define ALL0256N_GPIO_LED_RSSI_MED 12 +#define ALL0256N_GPIO_LED_RSSI_HIGH 13 +#define ALL0256N_KEYS_POLL_INTERVAL 20 +#define ALL0256N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0256N_KEYS_POLL_INTERVAL) + +const struct flash_platform_data all0256n_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info all0256n_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &all0256n_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button all0256n_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ALL0256N_KEYS_DEBOUNCE_INTERVAL, + .gpio = ALL0256N_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static struct gpio_led all0256n_leds_gpio[] __initdata = { + { + .name = "all0256n:green:rssilow", + .gpio = ALL0256N_GPIO_LED_RSSI_LOW, + .active_low = 1, + }, { + .name = "all0256n:green:rssimed", + .gpio = ALL0256N_GPIO_LED_RSSI_MED, + .active_low = 1, + }, { + .name = "all0256n:green:rssihigh", + .gpio = ALL0256N_GPIO_LED_RSSI_HIGH, + .active_low = 1, + } +}; + +static void __init all0256n_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(all0256n_spi_slave_info, + ARRAY_SIZE(all0256n_spi_slave_info)); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(all0256n_leds_gpio), + all0256n_leds_gpio); + ramips_register_gpio_buttons(-1, ALL0256N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(all0256n_gpio_buttons), + all0256n_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_ALL0256N, "ALL0256N", "Allnet ALL0256N", + all0256n_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all5002.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all5002.c new file mode 100644 index 0000000..71938f0 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all5002.c @@ -0,0 +1,61 @@ +/* + * Allnet ALL5002 + * + * Copyright (C) 2012 Daniel Golle <dgolle@allnet.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +// #define ALL5002_GPIO_BUTTON_RESET 0 +// #define ALL5002_GPIO_LED_RSSI_LOW 14 +// #define ALL5002_GPIO_LED_RSSI_MED 12 +// #define ALL5002_GPIO_LED_RSSI_HIGH 13 +// #define ALL5002_BUTTONS_POLL_INTERVAL 20 + +const struct flash_platform_data all5002_flash = { + .type = "mx25l25635e", +}; + +struct spi_board_info all5002_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &all5002_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static void __init all5002_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(all5002_spi_slave_info, + ARRAY_SIZE(all5002_spi_slave_info)); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_ALL5002, "ALL5002", "Allnet ALL5002/ALL5003", + all5002_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-argus-atp52b.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-argus-atp52b.c new file mode 100644 index 0000000..b683485 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-argus-atp52b.c @@ -0,0 +1,81 @@ +/* + * Argus ATP-52B router support + * http://www.argus-co.com/english/productsview.php?id=70&cid=81 + * + * Copyright (C) 2011 Roman Yeryomin <roman@advem.lv> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define ARGUS_ATP52B_GPIO_LED_RUN 9 +#define ARGUS_ATP52B_GPIO_LED_NET 13 +#define ARGUS_ATP52B_GPIO_BUTTON_WPS 0 +#define ARGUS_ATP52B_GPIO_BUTTON_RESET 10 +#define ARGUS_ATP52B_KEYS_POLL_INTERVAL 20 +#define ARGUS_ATP52B_KEYS_DEBOUNCE_INTERVAL (3 * ARGUS_ATP52B_KEYS_POLL_INTERVAL) + +static struct gpio_led argus_atp52b_leds_gpio[] __initdata = { + { + .name = "argus-atp52b:green:run", + .gpio = ARGUS_ATP52B_GPIO_LED_RUN, + .active_low = 1, + }, + { + .name = "argus-atp52b:amber:net", + .gpio = ARGUS_ATP52B_GPIO_LED_NET, + .active_low = 1, + } +}; + +static struct gpio_keys_button argus_atp52b_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = ARGUS_ATP52B_KEYS_DEBOUNCE_INTERVAL, + .gpio = ARGUS_ATP52B_GPIO_BUTTON_WPS, + .active_low = 1, + }, + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ARGUS_ATP52B_KEYS_DEBOUNCE_INTERVAL, + .gpio = ARGUS_ATP52B_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init argus_atp52b_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(argus_atp52b_leds_gpio), + argus_atp52b_leds_gpio); + ramips_register_gpio_buttons(-1, ARGUS_ATP52B_KEYS_POLL_INTERVAL, + ARRAY_SIZE(argus_atp52b_gpio_buttons), + argus_atp52b_gpio_buttons); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_ARGUS_ATP52B, "ARGUS_ATP52B", "Argus ATP-52B", + argus_atp52b_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-bc2.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-bc2.c new file mode 100644 index 0000000..7a21488 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-bc2.c @@ -0,0 +1,70 @@ +/* + * NexAira BC2 board support + * + * Copyright (C) 2011 Adam J. Porter <porter.adam@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define BC2_GPIO_BUTTON_RESET 17 +#define BC2_GPIO_LED_USB 20 + +#define BC2_KEYS_POLL_INTERVAL 20 +#define BC2_KEYS_DEBOUNCE_INTERVAL (3 * BC2_KEYS_POLL_INTERVAL) + +static struct gpio_led bc2_leds_gpio[] __initdata = { + { + .name = "bc2:blue:usb", + .gpio = BC2_GPIO_LED_USB, + .active_low = 1, + } +}; + +static struct gpio_keys_button bc2_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = BC2_KEYS_DEBOUNCE_INTERVAL, + .gpio = BC2_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init bc2_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT) | + RT305X_GPIO_MODE_JTAG); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(bc2_leds_gpio), + bc2_leds_gpio); + + ramips_register_gpio_buttons(-1, BC2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(bc2_gpio_buttons), + bc2_gpio_buttons); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_BC2, "BC2", "NexAira BC2", + bc2_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-br6425.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-br6425.c new file mode 100644 index 0000000..3a24516 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-br6425.c @@ -0,0 +1,78 @@ +/* + * Edimax BR-6425 board support + * + * Copyright (C) 2012 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define BR6425_GPIO_LED_POWER 9 +#define BR6425_GPIO_BUTTON_RESET 12 +#define BR6425_GPIO_SWITCH_RFKILL 13 +#define BR6425_GPIO_LED_WLAN 14 +#define BR6425_KEYS_POLL_INTERVAL 20 +#define BR6425_KEYS_DEBOUNCE_INTERVAL (3 * BR6425_KEYS_POLL_INTERVAL) + +static struct gpio_keys_button br6425_gpio_buttons[] __initdata = { + { + .desc = "reset_wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = BR6425_KEYS_DEBOUNCE_INTERVAL, + .gpio = BR6425_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "RFKILL switch", + .type = EV_SW, + .code = KEY_RFKILL, + .debounce_interval = BR6425_KEYS_DEBOUNCE_INTERVAL, + .gpio = BR6425_GPIO_SWITCH_RFKILL, + .active_low = 1, + }, +}; + +static struct gpio_led br6425_leds_gpio[] __initdata = { + { + .name = "edimax:green:power", + .gpio = BR6425_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "edimax:orange:wlan", + .gpio = BR6425_GPIO_LED_WLAN, + .active_low = 1, + }, +}; + +static void __init br6425_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_flash(0); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(br6425_leds_gpio), + br6425_leds_gpio); + ramips_register_gpio_buttons(-1, BR6425_KEYS_POLL_INTERVAL, + ARRAY_SIZE(br6425_gpio_buttons), + br6425_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_BR6425, "BR-6425", "Edimax BR-6425", + br6425_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-broadway.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-broadway.c new file mode 100644 index 0000000..74dfaa3 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-broadway.c @@ -0,0 +1,87 @@ +/* + * Hauppauge/PCTV Broadway Support + * + * Copyright (C) 2012 Devin Heitmueller <dheitmueller@kernellabs.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define BROADWAY_GPIO_LED_DISKMOUNT 9 +#define BROADWAY_GPIO_LED_WPS 14 + +#define BROADWAY_GPIO_BUTTON_WPS 0 +#define BROADWAY_GPIO_BUTTON_FACTORYRESET 13 + +#define BROADWAY_KEYS_POLL_INTERVAL 20 +#define BROADWAY_KEYS_DEBOUNCE_INTERVAL (3 * BROADWAY_KEYS_POLL_INTERVAL) + +static struct gpio_led broadway_leds_gpio[] __initdata = { + { + .name = "red:diskmounted", + .gpio = BROADWAY_GPIO_LED_DISKMOUNT, + .active_low = 1, + }, + { + .name = "red:wps_active", + .gpio = BROADWAY_GPIO_LED_WPS, + .active_low = 1, + }, +}; + +static struct gpio_keys_button broadway_gpio_buttons[] __initdata = { + { + .desc = "Factory Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = BROADWAY_KEYS_DEBOUNCE_INTERVAL, + .gpio = BROADWAY_GPIO_BUTTON_FACTORYRESET, + .active_low = 1, + }, +#ifdef DJH_WPS_BUTTON_NOT_WIRED_TO_GPIO + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = BROADWAY_KEYS_DEBOUNCE_INTERVAL, + .gpio = BROADWAY_GPIO_BUTTON_WPS, + .active_low = 1, + }, +#endif +}; + +static void __init broadway_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT)); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(broadway_leds_gpio), + broadway_leds_gpio); + ramips_register_gpio_buttons(-1, BROADWAY_KEYS_POLL_INTERVAL, + ARRAY_SIZE(broadway_gpio_buttons), + broadway_gpio_buttons); + + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_BROADWAY, "BROADWAY", "Hauppauge Broadway", + broadway_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-carambola.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-carambola.c new file mode 100644 index 0000000..c24527a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-carambola.c @@ -0,0 +1,42 @@ +/* + * 8devices Carambola dev board support + * + * Copyright (C) 2012 Tobias Diedrich <ranma+openwrt@tdiedrich.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +static void __init carambola_init(void) +{ + /* Ugh, inverted logic... + * This actually puts the pins into GPIO mode rather I2C, SPI, ... */ + rt305x_gpio_init(RT305X_GPIO_MODE_UART0(RT305X_GPIO_MODE_GPIO) | + RT305X_GPIO_MODE_I2C | + RT305X_GPIO_MODE_SPI | + RT305X_GPIO_MODE_JTAG | + RT305X_GPIO_MODE_MDIO); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_CARAMBOLA, "CARAMBOLA", "8devices Carambola", + carambola_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dap-1350.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dap-1350.c new file mode 100644 index 0000000..17a49aa --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dap-1350.c @@ -0,0 +1,95 @@ +/* + * D-Link DAP-1350 board support + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define DAP_1350_GPIO_LED_POWER_BLUE 8 +#define DAP_1350_GPIO_LED_POWER_RED 9 +#define DAP_1350_GPIO_LED_WPS 14 + +#define DAP_1350_GPIO_BUTTON_WPS 0 /* active low */ +#define DAP_1350_GPIO_BUTTON_RESET 10 /* active low */ +#define DAP_1350_GPIO_SWITCH_MODE_AP 7 /* active low */ +#define DAP_1350_GPIO_SWITCH_MODE_RT 11 /* active low */ + +#define DAP_1350_KEYS_POLL_INTERVAL 20 +#define DAP_1350_KEYS_DEBOUNCE_INTERVAL (3 * DAP_1350_KEYS_POLL_INTERVAL) + +static struct gpio_led dap_1350_leds_gpio[] __initdata = { + { + .name = "d-link:blue:power", + .gpio = DAP_1350_GPIO_LED_POWER_BLUE, + .active_low = 1, + }, { + .name = "d-link:red:power", + .gpio = DAP_1350_GPIO_LED_POWER_RED, + .active_low = 1, + }, { + .name = "d-link:blue:wps", + .gpio = DAP_1350_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button dap_1350_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, + .gpio = DAP_1350_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, + .gpio = DAP_1350_GPIO_BUTTON_WPS, + .active_low = 1, + }, { + .desc = "rt", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, + .gpio = DAP_1350_GPIO_SWITCH_MODE_RT, + .active_low = 1, + }, { + .desc = "ap", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, + .gpio = DAP_1350_GPIO_SWITCH_MODE_AP, + .active_low = 1, + } +}; + +static void __init dap_1350_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(dap_1350_leds_gpio), + dap_1350_leds_gpio); + ramips_register_gpio_buttons(-1, DAP_1350_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dap_1350_gpio_buttons), + dap_1350_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_DAP_1350, "DAP-1350", "D-Link DAP-1350", + dap_1350_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-300-revb.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-300-revb.c new file mode 100644 index 0000000..3ae1b78 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-300-revb.c @@ -0,0 +1,155 @@ +/* + * D-Link DIR-300 rev B board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define DIR_300B_GPIO_LED_STATUS_AMBER 8 +#define DIR_300B_GPIO_LED_STATUS_GREEN 9 +#define DIR_300B_GPIO_LED_WPS 13 +/* + * NOTE: The wan led is also connected to the switch, both + * switch and gpio must be active to make it light up + */ +#define DIR_300B_GPIO_LED_WAN_GREEN 12 +#define DIR_300B_GPIO_LED_WAN_AMBER 14 + +/* + * NOTE: the WPS led in DIR-620 consists of two antiparallel leds, + * so they can't be lit simultaneously + */ +#define DIR_620_GPIO_LED_WPS_AMBER 11 + +#define DIR_300B_GPIO_BUTTON_WPS 0 /* active low */ +#define DIR_300B_GPIO_BUTTON_RESET 10 /* active low */ + +#define DIR_300B_KEYS_POLL_INTERVAL 20 +#define DIR_300B_KEYS_DEBOUNCE_INTERVAL (3 * DIR_300B_KEYS_POLL_INTERVAL) + +static struct gpio_led dir_300b_leds_gpio[] __initdata = { + { + .name = "d-link:amber:status", + .gpio = DIR_300B_GPIO_LED_STATUS_AMBER, + .active_low = 1, + }, { + .name = "d-link:green:status", + .gpio = DIR_300B_GPIO_LED_STATUS_GREEN, + .active_low = 1, + }, { + .name = "d-link:amber:wan", + .gpio = DIR_300B_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, { + .name = "d-link:green:wan", + .gpio = DIR_300B_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, { + .name = "d-link:blue:wps", + .gpio = DIR_300B_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir_300b_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_300B_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_300B_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_300B_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_300B_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct gpio_led dir_620_leds_gpio[] __initdata = { + { + .name = "d-link:amber:status", + .gpio = DIR_300B_GPIO_LED_STATUS_AMBER, + .active_low = 1, + }, { + .name = "d-link:green:status", + .gpio = DIR_300B_GPIO_LED_STATUS_GREEN, + .active_low = 1, + }, { + .name = "d-link:amber:wan", + .gpio = DIR_300B_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, { + .name = "d-link:green:wan", + .gpio = DIR_300B_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, { + .name = "d-link:blue:wps", + .gpio = DIR_300B_GPIO_LED_WPS, + }, { + .name = "d-link:amber:wps", + .gpio = DIR_620_GPIO_LED_WPS_AMBER, + } +}; + +static void __init dir_common_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_buttons(-1, DIR_300B_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_300b_gpio_buttons), + dir_300b_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +static void __init dir_300b_init(void) +{ + dir_common_init(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_300b_leds_gpio), + dir_300b_leds_gpio); +} + +static void __init dir_620a1_init(void) +{ + dir_common_init(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_620_leds_gpio), + dir_620_leds_gpio); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_DIR_300_B1, "DIR-300-B1", "D-Link DIR-300 B1", + dir_300b_init); + +MIPS_MACHINE(RAMIPS_MACH_DIR_600_B1, "DIR-600-B1", "D-Link DIR-600 B1", + dir_300b_init); + +MIPS_MACHINE(RAMIPS_MACH_DIR_600_B2, "DIR-600-B2", "D-Link DIR-600 B2", + dir_300b_init); + +MIPS_MACHINE(RAMIPS_MACH_DIR_615_D, "DIR-615-D", "D-Link DIR-615 D", + dir_300b_init); + +MIPS_MACHINE(RAMIPS_MACH_DIR_620_A1, "DIR-620-A1", "D-Link DIR-620 A1", + dir_620a1_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-615-h1.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-615-h1.c new file mode 100644 index 0000000..dbfe4aa --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-615-h1.c @@ -0,0 +1,112 @@ +/* + * D-Link DIR-615 H1 + * + * Copyright (C) 2012 Mikko Hissa <mikko.hissa@uta.fi> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define DIR_615_H1_GPIO_LED_WAN_AMBER 12 /* active low */ +#define DIR_615_H1_GPIO_LED_WAN_GREEN 13 /* active low */ +#define DIR_615_H1_GPIO_LED_WPS_BLUE 14 /* active low */ + +#define DIR_615_H1_GPIO_LED_STATUS_AMBER 7 +#define DIR_615_H1_GPIO_LED_STATUS_GREEN 9 + +#define DIR_615_H1_GPIO_BUTTON_RESET 10 /* active low */ +#define DIR_615_H1_GPIO_BUTTON_WPS 0 /* active low */ + +#define DIR_615_H1_KEYS_POLL_INTERVAL 20 +#define DIR_615_H1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_H1_KEYS_POLL_INTERVAL) + +static struct gpio_led dir_615_h1_leds_gpio[] __initdata = { + { + .name = "d-link:amber:status", + .gpio = DIR_615_H1_GPIO_LED_STATUS_AMBER, + }, { + .name = "d-link:green:status", + .gpio = DIR_615_H1_GPIO_LED_STATUS_GREEN, + }, { + .name = "d-link:amber:wan", + .gpio = DIR_615_H1_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, { + .name = "d-link:green:wan", + .gpio = DIR_615_H1_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, { + .name = "d-link:blue:wps", + .gpio = DIR_615_H1_GPIO_LED_WPS_BLUE, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir_615_h1_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_615_H1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615_H1_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_615_H1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615_H1_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +const struct flash_platform_data dir615h1_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info dir615h1_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &dir615h1_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static void __init dir615h1_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(dir615h1_spi_slave_info, + ARRAY_SIZE(dir615h1_spi_slave_info)); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_615_h1_leds_gpio), + dir_615_h1_leds_gpio); + ramips_register_gpio_buttons(-1, DIR_615_H1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_615_h1_gpio_buttons), + dir_615_h1_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_DIR_615_H1, "DIR-615-H1", "D-Link DIR-615 H1", + dir615h1_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-esr-9753.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-esr-9753.c new file mode 100644 index 0000000..d5f65df --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-esr-9753.c @@ -0,0 +1,81 @@ +/* + * Senao / EnGenius ESR-9753 board support + * + * Copyright (C) 2011 Artur Wronowski <arteqw@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define ESR_9753_GPIO_LED_POWER 8 +#define ESR_9753_GPIO_LED_WPS 14 + +#define ESR_9753_GPIO_BUTTON_WPS 0 /* active low */ +#define ESR_9753_GPIO_BUTTON_RESET 10 /* active low */ + +#define ESR_9753_KEYS_POLL_INTERVAL 20 +#define ESR_9753_KEYS_DEBOUNCE_INTERVAL (3 * ESR_9753_KEYS_POLL_INTERVAL) + +static struct gpio_led esr_9753_leds_gpio[] __initdata = { + { + .name = "esr-9753:orange:power", + .gpio = ESR_9753_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "esr-9753:orange:wps", + .gpio = ESR_9753_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button esr_9753_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ESR_9753_KEYS_DEBOUNCE_INTERVAL, + .gpio = ESR_9753_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = ESR_9753_KEYS_DEBOUNCE_INTERVAL, + .gpio = ESR_9753_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init esr_9753_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(esr_9753_leds_gpio), + esr_9753_leds_gpio); + + ramips_register_gpio_buttons(-1, ESR_9753_KEYS_POLL_INTERVAL, + ARRAY_SIZE(esr_9753_gpio_buttons), + esr_9753_gpio_buttons); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_ESR_9753, "ESR-9753", "Senao / EnGenius ESR-9753", + esr_9753_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-f5d8235-v2.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-f5d8235-v2.c new file mode 100644 index 0000000..073fc75 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-f5d8235-v2.c @@ -0,0 +1,108 @@ +/* + * Belkin F5D8235 v2 board support + * + * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <linux/rtl8366.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define F5D8235_V2_GPIO_LED_INTERNET_BLUE 5 +#define F5D8235_V2_GPIO_LED_INTERNET_AMBER 6 +#define F5D8235_V2_GPIO_LED_MODEM_BLUE 11 +#define F5D8235_V2_GPIO_LED_MODEM_AMBER 8 +#define F5D8235_V2_GPIO_LED_ROUTER 9 +#define F5D8235_V2_GPIO_LED_STORAGE_BLUE 23 +#define F5D8235_V2_GPIO_LED_STORAGE_AMBER 22 +#define F5D8235_V2_GPIO_LED_SECURITY_BLUE 13 +#define F5D8235_V2_GPIO_LED_SECURITY_AMBER 12 + +static struct gpio_led f5d8235v2_leds_gpio[] __initdata = { + { + .name = "f5d8235v2:blue:internet", + .gpio = F5D8235_V2_GPIO_LED_INTERNET_BLUE, + .active_low = 1, + }, { + .name = "f5d8235v2:amber:internet", + .gpio = F5D8235_V2_GPIO_LED_INTERNET_AMBER, + .active_low = 1, + }, { + .name = "f5d8235v2:blue:modem", + .gpio = F5D8235_V2_GPIO_LED_MODEM_BLUE, + .active_low = 1, + }, { + .name = "f5d8235v2:amber:modem", + .gpio = F5D8235_V2_GPIO_LED_MODEM_AMBER, + .active_low = 1, + }, { + .name = "f5d8235v2:blue:router", + .gpio = F5D8235_V2_GPIO_LED_ROUTER, + .active_low = 1, + }, { + .name = "f5d8235v2:blue:storage", + .gpio = F5D8235_V2_GPIO_LED_STORAGE_BLUE, + .active_low = 1, + }, { + .name = "f5d8235v2:amber:storage", + .gpio = F5D8235_V2_GPIO_LED_STORAGE_AMBER, + .active_low = 1, + }, { + .name = "f5d8235v2:blue:security", + .gpio = F5D8235_V2_GPIO_LED_SECURITY_BLUE, + .active_low = 1, + }, { + .name = "f5d8235v2:amber:security", + .gpio = F5D8235_V2_GPIO_LED_SECURITY_AMBER, + .active_low = 1, + } +}; + +static struct rtl8366_platform_data f5d8235v2_switch_data = { + .gpio_sda = RT305X_GPIO_I2C_SD, + .gpio_sck = RT305X_GPIO_I2C_SCLK, +}; + +static struct platform_device f5d8235v2_switch = { + .name = RTL8366RB_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &f5d8235v2_switch_data, + } +}; + +static void __init f5d8235v2_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT) | + RT305X_GPIO_MODE_I2C | + RT305X_GPIO_MODE_SPI | + RT305X_GPIO_MODE_MDIO); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235v2_leds_gpio), + f5d8235v2_leds_gpio); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; + rt305x_register_ethernet(); + platform_device_register(&f5d8235v2_switch); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_F5D8235_V2, "F5D8235_V2", "Belkin F5D8235 v2", + f5d8235v2_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-fonera20n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-fonera20n.c new file mode 100644 index 0000000..a433e40 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-fonera20n.c @@ -0,0 +1,87 @@ +/* + * La Fonera20N board support + * + * Copyright (C) 2009 John Crispin <blogic@openwrt.org> + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define FONERA20N_GPIO_BUTTON_RESET 12 +#define FONERA20N_GPIO_SWITCH 13 +#define FONERA20N_GPIO_LED_WIFI 7 +#define FONERA20N_GPIO_LED_POWER 9 +#define FONERA20N_GPIO_LED_USB 14 + +#define FONERA20N_KEYS_POLL_INTERVAL 20 +#define FONERA20N_KEYS_DEBOUNCE_INTERVAL (3 * FONERA20N_KEYS_POLL_INTERVAL) + +static struct gpio_led fonera20n_leds_gpio[] __initdata = { + { + .name = "fonera20n:orange:wifi", + .gpio = FONERA20N_GPIO_LED_WIFI, + .active_low = 1, + }, { + .name = "fonera20n:green:power", + .gpio = FONERA20N_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "fonera20n:orange:usb", + .gpio = FONERA20N_GPIO_LED_USB, + .active_low = 1, + } +}; + +static struct gpio_keys_button fonera20n_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = FONERA20N_KEYS_DEBOUNCE_INTERVAL, + .gpio = FONERA20N_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "switch", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = FONERA20N_KEYS_DEBOUNCE_INTERVAL, + .gpio = FONERA20N_GPIO_SWITCH, + .active_low = 1, + } +}; + +static void __init fonera20n_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(fonera20n_leds_gpio), + fonera20n_leds_gpio); + + ramips_register_gpio_buttons(-1, FONERA20N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(fonera20n_gpio_buttons), + fonera20n_gpio_buttons); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_FONERA20N, "FONERA20N", "La Fonera 2.0N", + fonera20n_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-freestation5.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-freestation5.c new file mode 100644 index 0000000..b868244 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-freestation5.c @@ -0,0 +1,34 @@ +/* + * ARC FreeStation2/5 board support + * + * Copyright (C) 2009 John Crispin <blogic@openwrt.org> + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2012 Pau Escrich <p4u@dabax.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +static void __init freestation5_init(void) +{ + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_FREESTATION5, "FREESTATION5", "ARC FreeStation5", + freestation5_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-hw550-3g.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-hw550-3g.c new file mode 100644 index 0000000..b274b91 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-hw550-3g.c @@ -0,0 +1,105 @@ +/* + * Aztech HW550-3G board support + * + * Copyright (C) 2011 Layne Edwards <ledwards76@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define HW550_3G_GPIO_LED_USB 8 +#define HW550_3G_GPIO_LED_3G 11 +#define HW550_3G_GPIO_LED_STATUS 12 +#define HW550_3G_GPIO_LED_WPS 14 + +#define HW550_3G_GPIO_BUTTON_RESET 10 +#define HW550_3G_GPIO_BUTTON_CONNECT 7 +#define HW550_3G_GPIO_BUTTON_WPS 0 + +#define HW550_3G_KEYS_POLL_INTERVAL 20 +#define HW550_3G_KEYS_DEBOUNCE_INTERVAL (3 * HW550_3G_KEYS_POLL_INTERVAL) + +static struct gpio_led hw550_3g_leds_gpio[] __initdata = { + { + .name = "hw550-3g:green:usb", + .gpio = HW550_3G_GPIO_LED_USB, + .active_low = 1, + }, { + .name = "hw550-3g:green:3g", + .gpio = HW550_3G_GPIO_LED_3G, + .active_low = 1, + }, { + .name = "hw550-3g:green:status", + .gpio = HW550_3G_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "hw550-3g:green:wps", + .gpio = HW550_3G_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button hw550_3g_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL, + .gpio = HW550_3G_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "connect", + .type = EV_KEY, + .code = KEY_CONNECT, + .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL, + .gpio = HW550_3G_GPIO_BUTTON_CONNECT, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL, + .gpio = HW550_3G_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +#define HW550_3G_GPIO_MODE \ + ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ + RT305X_GPIO_MODE_MDIO) + +static void __init hw550_3g_init(void) +{ + rt305x_gpio_init(HW550_3G_GPIO_MODE); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(hw550_3g_leds_gpio), + hw550_3g_leds_gpio); + ramips_register_gpio_buttons(-1, HW550_3G_KEYS_POLL_INTERVAL, + ARRAY_SIZE(hw550_3g_gpio_buttons), + hw550_3g_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_HW550_3G, "HW550-3G", "Aztech HW550-3G", + hw550_3g_init); + +MIPS_MACHINE(RAMIPS_MACH_ALL0239_3G, "ALL0239-3G", "Allnet ALL0239-3G", + hw550_3g_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mofi3500-3gn.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mofi3500-3gn.c new file mode 100644 index 0000000..38d217a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mofi3500-3gn.c @@ -0,0 +1,102 @@ +/* + * MoFi Network MOFI3500-3GN board support + * + * Copyright (C) 2011 Layne Edwards <ledwards76@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define MOFI3500_3GN_GPIO_LED_USB 8 +#define MOFI3500_3GN_GPIO_LED_3G 11 +#define MOFI3500_3GN_GPIO_LED_STATUS 12 +#define MOFI3500_3GN_GPIO_LED_WPS 14 + +#define MOFI3500_3GN_GPIO_BUTTON_RESET 10 +#define MOFI3500_3GN_GPIO_BUTTON_CONNECT 7 +#define MOFI3500_3GN_GPIO_BUTTON_WPS 0 + +#define MOFI3500_3GN_KEYS_POLL_INTERVAL 20 +#define MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL (3 * MOFI3500_3GN_KEYS_POLL_INTERVAL) + +static struct gpio_led mofi3500_3gn_leds_gpio[] __initdata = { + { + .name = "mofi3500-3gn:green:usb", + .gpio = MOFI3500_3GN_GPIO_LED_USB, + .active_low = 1, + }, { + .name = "mofi3500-3gn:green:3g", + .gpio = MOFI3500_3GN_GPIO_LED_3G, + .active_low = 1, + }, { + .name = "mofi3500-3gn:green:status", + .gpio = MOFI3500_3GN_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "mofi3500-3gn:green:wps", + .gpio = MOFI3500_3GN_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button mofi3500_3gn_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL, + .gpio = MOFI3500_3GN_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "connect", + .type = EV_KEY, + .code = KEY_CONNECT, + .debounce_interval = MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL, + .gpio = MOFI3500_3GN_GPIO_BUTTON_CONNECT, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL, + .gpio = MOFI3500_3GN_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +#define MOFI3500_3GN_GPIO_MODE \ + ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ + RT305X_GPIO_MODE_MDIO) + +static void __init mofi3500_3gn_init(void) +{ + rt305x_gpio_init(MOFI3500_3GN_GPIO_MODE); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(mofi3500_3gn_leds_gpio), + mofi3500_3gn_leds_gpio); + ramips_register_gpio_buttons(-1, MOFI3500_3GN_KEYS_POLL_INTERVAL, + ARRAY_SIZE(mofi3500_3gn_gpio_buttons), + mofi3500_3gn_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_MOFI3500_3GN, "MOFI3500-3GN", "MoFi Network MOFI3500-3GN", + mofi3500_3gn_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mzk-w300nh2.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mzk-w300nh2.c new file mode 100644 index 0000000..01cabbc --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mzk-w300nh2.c @@ -0,0 +1,94 @@ +/* + * Planex MZK-W300NH2 board support + * + * Copyright (C) 2012 Samir Ibradžić <sibradzic@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define MZKW300NH2_GPIO_BUTTON_RESET 0 /* active low */ +#define MZKW300NH2_GPIO_BUTTON_WPS 12 /* active low */ +#define MZKW300NH2_GPIO_SWITCH_MODE_RT 13 /* active low */ + +#define MZKW300NH2_GPIO_LED_POWER 9 +#define MZKW300NH2_GPIO_LED_WLAN 14 +#define MZKW300NH2_GPIO_LED_WPS 11 + +#define MZKW300NH2_KEYS_POLL_INTERVAL 20 +#define MZKW300NH2_KEYS_DEBOUNCE_INTERVAL (3 * MZKW300NH2_KEYS_POLL_INTERVAL) + +static struct gpio_led mzkw300nh2_leds_gpio[] __initdata = { + { + .name = "mzkw300nh2:green:power", + .gpio = MZKW300NH2_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "mzkw300nh2:amber:wlan", + .gpio = MZKW300NH2_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "mzkw300nh2:amber:wps", + .gpio = MZKW300NH2_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button mzkw300nh2_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = MZKW300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZKW300NH2_GPIO_BUTTON_WPS, + .active_low = 1, + }, { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = MZKW300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZKW300NH2_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "rt", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = MZKW300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZKW300NH2_GPIO_SWITCH_MODE_RT, + .active_low = 1, + } +}; + +static void __init mzkw300nh2_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_UART0(RT305X_GPIO_MODE_GPIO) | + RT305X_GPIO_MODE_I2C | + RT305X_GPIO_MODE_SPI | + RT305X_GPIO_MODE_JTAG); + + rt305x_register_flash(0); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(mzkw300nh2_leds_gpio), + mzkw300nh2_leds_gpio); + ramips_register_gpio_buttons(-1, MZKW300NH2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(mzkw300nh2_gpio_buttons), + mzkw300nh2_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_MZKW300NH2, "MZK-W300NH2", "Planex MZK-W300NH2", + mzkw300nh2_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nbg-419n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nbg-419n.c new file mode 100644 index 0000000..8565203 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nbg-419n.c @@ -0,0 +1,78 @@ +/* + * ZyXEL NBG-419N board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define NBG_419N_GPIO_LED_POWER 9 +#define NBG_419N_GPIO_LED_WPS 14 + +#define NBG_419N_GPIO_BUTTON_WPS 0 /* active low */ +#define NBG_419N_GPIO_BUTTON_RESET 10 /* active low */ + +#define NBG_419N_KEYS_POLL_INTERVAL 20 +#define NBG_419N_KEYS_DEBOUNCE_INTERVAL (3 * NBG_419N_KEYS_POLL_INTERVAL) + +static struct gpio_led nbg_419n_leds_gpio[] __initdata = { + { + .name = "nbg-419n:green:power", + .gpio = NBG_419N_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "nbg-419n:green:wps", + .gpio = NBG_419N_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button nbg_419n_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = NBG_419N_KEYS_DEBOUNCE_INTERVAL, + .gpio = NBG_419N_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = NBG_419N_KEYS_DEBOUNCE_INTERVAL, + .gpio = NBG_419N_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init nbg_419n_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(nbg_419n_leds_gpio), + nbg_419n_leds_gpio); + ramips_register_gpio_buttons(-1, NBG_419N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(nbg_419n_gpio_buttons), + nbg_419n_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_NBG_419N, "NBG-419N", "ZyXEL NBG-419N", nbg_419n_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nw718.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nw718.c new file mode 100644 index 0000000..3c9d047 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nw718.c @@ -0,0 +1,95 @@ +/* + * Netcore NW718 board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/spi/spi.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define NW718_GPIO_LED_USB 8 +#define NW718_GPIO_LED_CPU 13 +#define NW718_GPIO_LED_WPS 14 + +#define NW718_GPIO_BUTTON_WPS 0 +#define NW718_GPIO_BUTTON_RESET 10 + +#define NW718_GPIO_SPI_CS0 3 + +#define NW718_KEYS_POLL_INTERVAL 20 +#define NW718_KEYS_DEBOUNCE_INTERVAL (3 * NW718_KEYS_POLL_INTERVAL) + +static struct gpio_led nw718_leds_gpio[] __initdata = { + { + .name = "nw718:amber:cpu", + .gpio = NW718_GPIO_LED_CPU, + .active_low = 1, + }, { + .name = "nw718:amber:usb", + .gpio = NW718_GPIO_LED_USB, + .active_low = 1, + }, { + .name = "nw718:amber:wps", + .gpio = NW718_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button nw718_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = NW718_KEYS_DEBOUNCE_INTERVAL, + .gpio = NW718_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = NW718_KEYS_DEBOUNCE_INTERVAL, + .gpio = NW718_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct spi_board_info nw718_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + } +}; + +static void __init nw718_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_I2C | + RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(nw718_leds_gpio), + nw718_leds_gpio); + ramips_register_gpio_buttons(-1, NW718_KEYS_POLL_INTERVAL, + ARRAY_SIZE(nw718_gpio_buttons), + nw718_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_spi(nw718_spi_info, ARRAY_SIZE(nw718_spi_info)); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_WHR_G300N, "NW718", "Netcore NW718", nw718_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-omni-emb.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-omni-emb.c new file mode 100644 index 0000000..930ac30 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-omni-emb.c @@ -0,0 +1,74 @@ +/* + * Omnima MiniEMBWiFi board support + * + * Copyright (C) 2011 Johnathan Boyce <jon.boyce@globalreach.eu.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define OMNI_EMB_GPIO_BUTTON_RESET 12 /* active low */ + +#define OMNI_EMB_KEYS_POLL_INTERVAL 20 +#define OMNI_EMB_KEYS_DEBOUNCE_INTERVAL (3 * OMNI_EMB_KEYS_POLL_INTERVAL) + +#define OMNI_EMB_GPIO_LED_STATUS 9 +#define OMNI_EMB_GPIO_LED_WLAN 14 + +static struct gpio_led omni_emb_leds_gpio[] __initdata = { + { + .name = "emb:green:status", + .gpio = OMNI_EMB_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "emb:green:wlan", + .gpio = OMNI_EMB_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button omni_emb_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = OMNI_EMB_KEYS_DEBOUNCE_INTERVAL, + .gpio = OMNI_EMB_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init omni_emb_init(void) +{ + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(omni_emb_leds_gpio), + omni_emb_leds_gpio); + ramips_register_gpio_buttons(-1, OMNI_EMB_KEYS_POLL_INTERVAL, + ARRAY_SIZE(omni_emb_gpio_buttons), + omni_emb_gpio_buttons); + + rt305x_register_flash(0); + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_OMNI_EMB, "OMNI-EMB", "Omnima MiniEMBWiFi", + omni_emb_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-psr-680w.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-psr-680w.c new file mode 100644 index 0000000..a6d10f7 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-psr-680w.c @@ -0,0 +1,73 @@ +/* + * Petatel PSR-680W Wireless 3G Router support + * + * Copyright (C) 2012 Dmitry Shmygov <shmygov@rambler.ru> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define PSR_680W_GPIO_BUTTON_RESET 0 /* active low */ + +#define PSR_680W_GPIO_LED_STATUS 19 + +#define PSR_680W_KEYS_POLL_INTERVAL 20 +#define PSR_680W_KEYS_DEBOUNCE_INTERVAL (3 * PSR_680W_KEYS_POLL_INTERVAL) + + +static struct gpio_led psr_680w_leds_gpio[] __initdata = { + { + .name = "psr-680w:red:wan", + .gpio = PSR_680W_GPIO_LED_STATUS, + .active_low = 1, + } +}; + +static struct gpio_keys_button psr_680w_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = PSR_680W_KEYS_DEBOUNCE_INTERVAL, + .gpio = PSR_680W_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init psr_680w_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_I2S_UARTF << RT305X_GPIO_MODE_UART0_SHIFT) | + RT305X_GPIO_MODE_SPI | + RT305X_GPIO_MODE_JTAG | + RT305X_GPIO_MODE_MDIO | + RT305X_GPIO_MODE_RGMII); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(psr_680w_leds_gpio), + psr_680w_leds_gpio); + ramips_register_gpio_buttons(-1, PSR_680W_KEYS_POLL_INTERVAL, + ARRAY_SIZE(psr_680w_gpio_buttons), + psr_680w_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_PSR_680W, "PSR-680W", + "Petatel PSR-680W Wireless 3G Router", + psr_680w_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-pwh2004.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-pwh2004.c new file mode 100644 index 0000000..5baf32a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-pwh2004.c @@ -0,0 +1,69 @@ +/* + * Prolink PWH2004 support (or Abocom WR5205) + * + * Copyright (C) 2010 Esa Hyytia <esa@netlab.tkk.fi> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define PWH2004_GPIO_BUTTON_WPS 12 +#define PWH2004_GPIO_LED_POWER 9 +#define PWH2004_GPIO_LED_WIFI 14 +#define PWH2004_KEYS_POLL_INTERVAL 20 +#define PWH2004_KEYS_DEBOUNCE_INTERVAL (3 * PWH2004_KEYS_POLL_INTERVAL) + +static struct gpio_led pwh2004_leds_gpio[] __initdata = { + { + .name = "pwh2004:red:wifi", + .gpio = PWH2004_GPIO_LED_WIFI, + .active_low = 1, + }, { + .name = "pwh2004:green:power", + .gpio = PWH2004_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static struct gpio_keys_button pwh2004_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = PWH2004_KEYS_DEBOUNCE_INTERVAL, + .gpio = PWH2004_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init pwh2004_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(pwh2004_leds_gpio), + pwh2004_leds_gpio); + ramips_register_gpio_buttons(-1, PWH2004_KEYS_POLL_INTERVAL, + ARRAY_SIZE(pwh2004_gpio_buttons), + pwh2004_gpio_buttons); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_PWH2004, "PWH2004", "Prolink PWH2004", + pwh2004_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-g32-revb.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-g32-revb.c new file mode 100644 index 0000000..2f0f710 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-g32-revb.c @@ -0,0 +1,78 @@ +/* + * Asus RT-G32 rev B board support + * + * Copyright (C) 2011 Sergiy <piratfm@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define RT_G32B_GPIO_BUTTON_WPS 0 /* active low */ +#define RT_G32B_GPIO_BUTTON_RESET 10 /* active low */ + +#define RT_G32B_KEYS_POLL_INTERVAL 20 +#define RT_G32B_KEYS_DEBOUNCE_INTERVAL (3 * RT_G32B_KEYS_POLL_INTERVAL) + +const struct flash_platform_data rt_g32b_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info __initdata rt_g32b_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &rt_g32b_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button rt_g32b_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RT_G32B_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_G32B_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = RT_G32B_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_G32B_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init rt_g32b_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(rt_g32b_spi_slave_info, + ARRAY_SIZE(rt_g32b_spi_slave_info)); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_buttons(-1, RT_G32B_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rt_g32b_gpio_buttons), + rt_g32b_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_RT_G32_B1, "RT-G32-B1", "Asus RT-G32 B1", + rt_g32b_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n10-plus.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n10-plus.c new file mode 100644 index 0000000..5b496d4 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n10-plus.c @@ -0,0 +1,74 @@ +/* + * ASUS RT-N10+ board support + * + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define RT_N10_PLUS_GPIO_LED_WPS 14 + +#define RT_N10_PLUS_GPIO_BUTTON_WPS 0 /* active low */ +#define RT_N10_PLUS_GPIO_BUTTON_RESET 10 /* active low */ + +#define RT_N10_PLUS_KEYS_POLL_INTERVAL 20 +#define RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL (3 * RT_N10_PLUS_KEYS_POLL_INTERVAL) + +static struct gpio_led rt_n10_plus_leds_gpio[] __initdata = { + { + .name = "asus:green:wps", + .gpio = RT_N10_PLUS_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button rt_n10_plus_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_N10_PLUS_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_N10_PLUS_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init rt_n10_plus_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n10_plus_leds_gpio), + rt_n10_plus_leds_gpio); + ramips_register_gpio_buttons(-1, RT_N10_PLUS_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rt_n10_plus_gpio_buttons), + rt_n10_plus_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_RT_N10_PLUS, "RT-N10-PLUS", "Asus RT-N10+", + rt_n10_plus_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n13u.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n13u.c new file mode 100644 index 0000000..cae857a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n13u.c @@ -0,0 +1,83 @@ +/* + * ASUS RT-N13U board support + * + * Copyright (C) 2012 lintel<lintel.huang@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define RT_N13U_GPIO_BUTTON_RESET 10 +#define RT_N13U_GPIO_BUTTON_WPS 0 + +#define RT_N13U_GPIO_LED_POWER 7 +#define RT_N13U_GPIO_LED_WIFI 8 + + +#define RT_N13U_BUTTONS_POLL_INTERVAL 10 +#define RT_N13U_BUTTONS_DEBOUNCE_INTERVAL (3 * RT_N13U_BUTTONS_POLL_INTERVAL) + +static struct gpio_led rt_n13u_leds_gpio[] __initdata = { + { + .name = "rt-n13u:power", + .gpio = RT_N13U_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "rt-n13u:wifi", + .gpio = RT_N13U_GPIO_LED_WIFI, + .active_low = 1, + } +}; + +static struct gpio_keys_button rt_n13u_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RT_N13U_BUTTONS_DEBOUNCE_INTERVAL, + .gpio = RT_N13U_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = RT_N13U_BUTTONS_DEBOUNCE_INTERVAL, + .gpio = RT_N13U_GPIO_BUTTON_WPS, + .active_low = 1, + }, +}; + +static void __init rt_n13u_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n13u_leds_gpio), + rt_n13u_leds_gpio); + + ramips_register_gpio_buttons(-1, RT_N13U_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(rt_n13u_gpio_buttons), + rt_n13u_gpio_buttons); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_RT_N13U, "RT-N13U", "Asus RT-N13U", + rt_n13u_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-sl-r7205.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-sl-r7205.c new file mode 100644 index 0000000..31f002c --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-sl-r7205.c @@ -0,0 +1,76 @@ +/* + * Skyline SL-R7205 Wireless 3G Router support + * + * Copyright (C) 2012 Haipoh Teoh <hpteoh@ceedtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define SL_R7205_GPIO_BUTTON_WPS 0 +#define SL_R7205_GPIO_BUTTON_RESET 10 /* active low */ + +#define SL_R7205_GPIO_LED_WIFI 7 + +#define SL_R7205_KEYS_POLL_INTERVAL 20 +#define SL_R7205_KEYS_DEBOUNCE_INTERVAL (3 * SL_R7205_KEYS_POLL_INTERVAL) + +static struct gpio_led sl_r7205_leds_gpio[] __initdata = { + { + .name = "sl-r7205:green:wifi", + .gpio = SL_R7205_GPIO_LED_WIFI, + .active_low = 1, + } +}; + +static struct gpio_keys_button sl_r7205_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = SL_R7205_KEYS_DEBOUNCE_INTERVAL, + .gpio = SL_R7205_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = SL_R7205_KEYS_DEBOUNCE_INTERVAL, + .gpio = SL_R7205_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init sl_r7205_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(sl_r7205_leds_gpio), + sl_r7205_leds_gpio); + ramips_register_gpio_buttons(-1, SL_R7205_KEYS_POLL_INTERVAL, + ARRAY_SIZE(sl_r7205_gpio_buttons), + sl_r7205_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_SL_R7205, "SL-R7205", + "Skyline SL-R7205 Wireless 3G Router", + sl_r7205_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-326n4g.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-326n4g.c new file mode 100644 index 0000000..a529694 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-326n4g.c @@ -0,0 +1,102 @@ +/* + * UR-326N4G board support + * + * Copyright (C) 2013 Dmitry Lebedev <Lebedev@upvel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + + +#define UR_326N4G_GPIO_LED_3G 9 +#define UR_326N4G_GPIO_LED_GATEWAY 11 +#define UR_326N4G_GPIO_LED_AP 12 +#define UR_326N4G_GPIO_LED_STATION 13 +#define UR_326N4G_GPIO_LED_WPS 14 + +#define UR_326N4G_GPIO_BUTTON_RESET 10 +#define UR_326N4G_GPIO_BUTTON_CONNECT 7 +#define UR_326N4G_GPIO_BUTTON_WPS 0 +#define UR_326N4G_GPIO_BUTTON_WPS2 8 + +#define UR_326N4G_KEYS_POLL_INTERVAL 20 +#define UR_326N4G_KEYS_DEBOUNCE_INTERVAL (3 * UR_326N4G_KEYS_POLL_INTERVAL) + +static struct gpio_led UR_326N4G_leds_gpio[] __initdata = { + { + .name = "ur326:green:3g", + .gpio = UR_326N4G_GPIO_LED_3G, + .active_low = 1, + }, { + .name = "ur326:green:gateway", + .gpio = UR_326N4G_GPIO_LED_GATEWAY, + .active_low = 1, + }, { + .name = "ur326:green:ap", + .gpio = UR_326N4G_GPIO_LED_AP, + .active_low = 1, + }, { + .name = "ur326:green:wps", + .gpio = UR_326N4G_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "ur326:green:station", + .gpio = UR_326N4G_GPIO_LED_STATION, + .active_low = 1, + } +}; + +static struct gpio_keys_button UR_326N4G_gpio_buttons[] __initdata = { + { + .desc = "reset_wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UR_326N4G_KEYS_DEBOUNCE_INTERVAL, + .gpio = UR_326N4G_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "mode", + .type = EV_KEY, + .code = KEY_M, + .debounce_interval = UR_326N4G_KEYS_DEBOUNCE_INTERVAL, + .gpio = UR_326N4G_GPIO_BUTTON_CONNECT, + .active_low = 1, + } +}; + +#define UR_326N4G_GPIO_MODE \ + ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ + RT305X_GPIO_MODE_MDIO) + +static void __init UR_326N4G_init(void) +{ + rt305x_gpio_init(UR_326N4G_GPIO_MODE); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(UR_326N4G_leds_gpio), + UR_326N4G_leds_gpio); + ramips_register_gpio_buttons(-1, UR_326N4G_KEYS_POLL_INTERVAL, + ARRAY_SIZE(UR_326N4G_gpio_buttons), + UR_326N4G_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_UR_326N4G, "UR-326N4G", "UR-326N4G Wireless N router", + UR_326N4G_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-336un.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-336un.c new file mode 100644 index 0000000..0ff2649 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-336un.c @@ -0,0 +1,92 @@ +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + + +#define UR_336UN_GPIO_LED_3G 9 +#define UR_336UN_GPIO_LED_GATEWAY 11 +#define UR_336UN_GPIO_LED_AP 12 +#define UR_336UN_GPIO_LED_STATION 13 +#define UR_336UN_GPIO_LED_WPS 14 + +#define UR_336UN_GPIO_BUTTON_RESET 10 +#define UR_336UN_GPIO_BUTTON_CONNECT 7 +#define UR_336UN_GPIO_BUTTON_WPS 0 +#define UR_336UN_GPIO_BUTTON_WPS2 8 + +#define UR_336UN_KEYS_POLL_INTERVAL 20 +#define UR_336UN_KEYS_DEBOUNCE_INTERVAL (3 * UR_336UN_KEYS_POLL_INTERVAL) + +static struct gpio_led UR_336UN_leds_gpio[] __initdata = { + { + .name = "ur336:green:3g", + .gpio = UR_336UN_GPIO_LED_3G, + .active_low = 1, + }, { + .name = "ur336:green:gateway", + .gpio = UR_336UN_GPIO_LED_GATEWAY, + .active_low = 1, + }, { + .name = "ur336:green:ap", + .gpio = UR_336UN_GPIO_LED_AP, + .active_low = 1, + }, { + .name = "ur336:green:wps", + .gpio = UR_336UN_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "ur336:green:station", + .gpio = UR_336UN_GPIO_LED_STATION, + .active_low = 1, + } +}; + +static struct gpio_keys_button UR_336UN_gpio_buttons[] __initdata = { + { + .desc = "reset_wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UR_336UN_KEYS_DEBOUNCE_INTERVAL, + .gpio = UR_336UN_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "mode", + .type = EV_KEY, + .code = KEY_M, + .debounce_interval = UR_336UN_KEYS_DEBOUNCE_INTERVAL, + .gpio = UR_336UN_GPIO_BUTTON_CONNECT, + .active_low = 1, + } +}; + +#define UR_336UN_GPIO_MODE \ + ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ + RT305X_GPIO_MODE_MDIO) + +static void __init UR_336UN_init(void) +{ + rt305x_gpio_init(UR_336UN_GPIO_MODE); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(UR_336UN_leds_gpio), + UR_336UN_leds_gpio); + ramips_register_gpio_buttons(-1, UR_336UN_KEYS_POLL_INTERVAL, + ARRAY_SIZE(UR_336UN_gpio_buttons), + UR_336UN_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_UR_336UN, "UR-336UN", "UR-336UN Wireless N router", + UR_336UN_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-v22rw-2x2.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-v22rw-2x2.c new file mode 100644 index 0000000..7f43dab --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-v22rw-2x2.c @@ -0,0 +1,79 @@ +/* + * Ralink AP-RT3052-V22RW-2X2 board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define V22RW_2X2_GPIO_BUTTON_WPS 0 +#define V22RW_2X2_GPIO_BUTTON_SWRST 10 +#define V22RW_2X2_GPIO_LED_SECURITY 13 +#define V22RW_2X2_GPIO_LED_WPS 14 + +#define V22RW_2X2_KEYS_POLL_INTERVAL 20 +#define V22RW_2X2_KEYS_DEBOUNCE_INTERVAL (3 * V22RW_2X2_KEYS_POLL_INTERVAL) + +static struct gpio_led v22rw_2x2_leds_gpio[] __initdata = { + { + .name = "v22rw-2x2:green:security", + .gpio = V22RW_2X2_GPIO_LED_SECURITY, + .active_low = 1, + }, { + .name = "v22rw-2x2:red:wps", + .gpio = V22RW_2X2_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button v22rw_2x2_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = V22RW_2X2_KEYS_DEBOUNCE_INTERVAL, + .gpio = V22RW_2X2_GPIO_BUTTON_SWRST, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = V22RW_2X2_KEYS_DEBOUNCE_INTERVAL, + .gpio = V22RW_2X2_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init v22rw_2x2_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(v22rw_2x2_leds_gpio), + v22rw_2x2_leds_gpio); + ramips_register_gpio_buttons(-1, V22RW_2X2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(v22rw_2x2_gpio_buttons), + v22rw_2x2_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_V22RW_2X2, "V22RW-2X2", "Ralink AP-RT3052-V22RW-2X2", + v22rw_2x2_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w306r-v20.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w306r-v20.c new file mode 100644 index 0000000..7c8eb86 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w306r-v20.c @@ -0,0 +1,72 @@ +/* + * Tenda W306R V2.0 board support + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define W306R_V20_GPIO_LED_SYS 9 +#define W306R_V20_GPIO_LED_WPS 13 + +#define W306R_V20_GPIO_BUTTON_RESET 10 + +#define W306R_V20_KEYS_POLL_INTERVAL 20 +#define W306R_V20_KEYS_DEBOUNCE_INTERVAL (3 * W306R_V20_KEYS_POLL_INTERVAL) + +static struct gpio_led w306r_v20_leds_gpio[] __initdata = { + { + .name = "w306r-v20:green:sys", + .gpio = W306R_V20_GPIO_LED_SYS, + .active_low = 1, + }, { + .name = "w306r-v20:green:wps", + .gpio = W306R_V20_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button w306r_v20_gpio_buttons[] __initdata = { + { + .desc = "RESET/WPS", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = W306R_V20_KEYS_DEBOUNCE_INTERVAL, + .gpio = W306R_V20_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init w306r_v20_init(void) +{ + rt305x_register_flash(0); + + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(w306r_v20_leds_gpio), + w306r_v20_leds_gpio); + ramips_register_gpio_buttons(-1, W306R_V20_KEYS_POLL_INTERVAL, + ARRAY_SIZE(w306r_v20_gpio_buttons), + w306r_v20_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_W306R_V20, "W306R_V20", "Tenda W306R V2.0", + w306r_v20_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w502u.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w502u.c new file mode 100644 index 0000000..6633ca0 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w502u.c @@ -0,0 +1,83 @@ +/* + * ALFA Networks W502U board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define W502U_GPIO_LED_USB 13 +#define W502U_GPIO_LED_WPS 14 + +#define W502U_GPIO_BUTTON_WPS 0 +#define W502U_GPIO_BUTTON_RESET 10 + +#define W502U_KEYS_POLL_INTERVAL 20 +#define W502U_KEYS_DEBOUNCE_INTERVAL (3 * W502U_KEYS_POLL_INTERVAL) + +static struct gpio_led w502u_leds_gpio[] __initdata = { + { + .name = "alfa:blue:usb", + .gpio = W502U_GPIO_LED_USB, + .active_low = 1, + }, + { + .name = "alfa:blue:wps", + .gpio = W502U_GPIO_LED_WPS, + .active_low = 1, + }, +}; + +static struct gpio_keys_button w502u_gpio_buttons[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = W502U_KEYS_DEBOUNCE_INTERVAL, + .gpio = W502U_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = W502U_KEYS_DEBOUNCE_INTERVAL, + .gpio = W502U_GPIO_BUTTON_WPS, + .active_low = 1, + }, +}; + +static void __init w502u_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT)); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(w502u_leds_gpio), + w502u_leds_gpio); + ramips_register_gpio_buttons(-1, W502U_KEYS_POLL_INTERVAL, + ARRAY_SIZE(w502u_gpio_buttons), + w502u_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_W502U, "W502U", "ALFA Networks W502U", + w502u_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wcr150gn.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wcr150gn.c new file mode 100644 index 0000000..dec1a7b --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wcr150gn.c @@ -0,0 +1,80 @@ +/* + * Sparklan WCR-150GN board support + * + * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WCR150GN_GPIO_LED_USER 12 +#define WCR150GN_GPIO_LED_POWER 8 +#define WCR150GN_GPIO_BUTTON_WPS 10 +#define WCR150GN_GPIO_BUTTON_RESET 0 +#define WCR150GN_KEYS_POLL_INTERVAL 20 +#define WCR150GN_KEYS_DEBOUNCE_INTERVAL (3 * WCR150GN_KEYS_POLL_INTERVAL) + +static struct gpio_led wcr150gn_leds_gpio[] __initdata = { + { + .name = "wcr150gn:amber:user", + .gpio = WCR150GN_GPIO_LED_USER, + .active_low = 1, + }, + { + .name = "wcr150gn:amber:power", + .gpio = WCR150GN_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static struct gpio_keys_button wcr150gn_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WCR150GN_KEYS_DEBOUNCE_INTERVAL, + .gpio = WCR150GN_GPIO_BUTTON_WPS, + .active_low = 1, + }, + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WCR150GN_KEYS_DEBOUNCE_INTERVAL, + .gpio = WCR150GN_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init wcr150gn_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(wcr150gn_leds_gpio), + wcr150gn_leds_gpio); + ramips_register_gpio_buttons(-1, WCR150GN_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wcr150gn_gpio_buttons), + wcr150gn_gpio_buttons); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_WCR150GN, "WCR150GN", "Sparklan WCR-150GN", + wcr150gn_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-whr-g300n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-whr-g300n.c new file mode 100644 index 0000000..e5adb19 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-whr-g300n.c @@ -0,0 +1,100 @@ +/* + * Buffalo WHR-G300N board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WHR_G300N_GPIO_LED_DIAG 7 +#define WHR_G300N_GPIO_LED_ROUTER 9 +#define WHR_G300N_GPIO_LED_SECURITY 14 + +#define WHR_G300N_GPIO_BUTTON_AOSS 0 /* active low */ +#define WHR_G300N_GPIO_BUTTON_RESET 10 /* active low */ +#define WHR_G300N_GPIO_BUTTON_ROUTER_ON 8 /* active low */ +#define WHR_G300N_GPIO_BUTTON_ROUTER_OFF 11 /* active low */ + +#define WHR_G300N_KEYS_POLL_INTERVAL 20 +#define WHR_G300N_KEYS_DEBOUNCE_INTERVAL (3 * WHR_G300N_KEYS_POLL_INTERVAL) + +static struct gpio_led whr_g300n_leds_gpio[] __initdata = { + { + .name = "whr-g300n:red:diag", + .gpio = WHR_G300N_GPIO_LED_DIAG, + .active_low = 1, + }, { + .name = "whr-g300n:green:router", + .gpio = WHR_G300N_GPIO_LED_ROUTER, + .active_low = 1, + }, { + .name = "whr-g300n:amber:security", + .gpio = WHR_G300N_GPIO_LED_SECURITY, + .active_low = 1, + } +}; + +static struct gpio_keys_button whr_g300n_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WHR_G300N_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "aoss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WHR_G300N_GPIO_BUTTON_AOSS, + .active_low = 1, + }, { + .desc = "router-off", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WHR_G300N_GPIO_BUTTON_ROUTER_OFF, + .active_low = 1, + }, { + .desc = "router-on", + .type = EV_KEY, + .code = BTN_3, + .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WHR_G300N_GPIO_BUTTON_ROUTER_ON, + .active_low = 1, + } +}; + +static void __init whr_g300n_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(whr_g300n_leds_gpio), + whr_g300n_leds_gpio); + ramips_register_gpio_buttons(-1, WHR_G300N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(whr_g300n_gpio_buttons), + whr_g300n_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_WHR_G300N, "WHR-G300N", "Buffalo WHR-G300N", + whr_g300n_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n.c new file mode 100644 index 0000000..b548dfe --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n.c @@ -0,0 +1,94 @@ +/* + * Asus WL_330N board support + * + * Copyright (C) 2012 Frederic Leroy <fredo@starox.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WL_330N_GPIO_BUTTON_RESET 10 +#define WL_330N_GPIO_BUTTON_WPS 0 +#define WL_330N_GPIO_LED_LINK 9 +#define WL_330N_GPIO_LED_POWER 11 +#define WL_330N_KEYS_POLL_INTERVAL 20 +#define WL_330N_KEYS_DEBOUNCE_INTERVAL (3 * WL_330N_KEYS_POLL_INTERVAL) + +const struct flash_platform_data wl_330n_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info wl_330n_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &wl_330n_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button wl_330n_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL_330N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL_330N_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL_330N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL_330N_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct gpio_led wl_330n_leds_gpio[] __initdata = { + { + .name = "asus:blue:link", + .gpio = WL_330N_GPIO_LED_LINK, + .active_low = 1, + }, { + .name = "asus:blue:power", + .gpio = WL_330N_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static void __init wl_330n_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(wl_330n_spi_slave_info, + ARRAY_SIZE(wl_330n_spi_slave_info)); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(wl_330n_leds_gpio), + wl_330n_leds_gpio); + ramips_register_gpio_buttons(-1, WL_330N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wl_330n_gpio_buttons), + wl_330n_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_WL_330N, "WL_330N", "Asus WL-330N", + wl_330n_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n3g.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n3g.c new file mode 100644 index 0000000..599b9a9 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n3g.c @@ -0,0 +1,100 @@ +/* + * Asus WL_330N3G board support + * + * Copyright (C) 2012 Frederic Leroy <fredo@starox.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WL_330N3G_GPIO_BUTTON_RESET 10 +#define WL_330N3G_GPIO_BUTTON_WPS 0 +#define WL_330N3G_GPIO_LED_3G_BLUE 9 +#define WL_330N3G_GPIO_LED_3G_RED 13 +#define WL_330N3G_GPIO_LED_POWER 11 +#define WL_330N3G_KEYS_POLL_INTERVAL 20 +#define WL_330N3G_KEYS_DEBOUNCE_INTERVAL (3 * WL_330N3G_KEYS_POLL_INTERVAL) + +const struct flash_platform_data wl_330n3g_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info wl_330n3g_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &wl_330n3g_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button wl_330n3g_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL_330N3G_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL_330N3G_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL_330N3G_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL_330N3G_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct gpio_led wl_330n3g_leds_gpio[] __initdata = { + { + .name = "asus:blue:3g", + .gpio = WL_330N3G_GPIO_LED_3G_BLUE, + .active_low = 1, + }, { + .name = "asus:red:3g", + .gpio = WL_330N3G_GPIO_LED_3G_RED, + .active_low = 1, + }, { + .name = "asus:blue:power", + .gpio = WL_330N3G_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static void __init wl_330n3g_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(wl_330n3g_spi_slave_info, + ARRAY_SIZE(wl_330n3g_spi_slave_info)); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(wl_330n3g_leds_gpio), + wl_330n3g_leds_gpio); + ramips_register_gpio_buttons(-1, WL_330N3G_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wl_330n3g_gpio_buttons), + wl_330n3g_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_usb(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_WL_330N3G, "WL_330N3G", "Asus WL-330N3G", + wl_330n3g_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl341v3.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl341v3.c new file mode 100644 index 0000000..2cd1d5e --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl341v3.c @@ -0,0 +1,105 @@ +/* + * Sitecom WL341v3 board support + * + * Copyright (C) 2012 Marco Antonio Mauro <marcus90@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WL341V3_GPIO_LED_FIRST_AMBER 9 +#define WL341V3_GPIO_LED_FIRST_BLUE 13 +#define WL341V3_GPIO_LED_THIRD_AMBER 11 +#define WL341V3_GPIO_LED_THIRD_BLUE 14 +#define WL341V3_GPIO_LED_FOURTH_BLUE 10 +#define WL341V3_GPIO_LED_FIFTH_AMBER 12 +#define WL341V3_GPIO_LED_FIFTH_BLUE 8 + +#define WL341V3_GPIO_BUTTON_WPS 5 /* active low */ +#define WL341V3_GPIO_BUTTON_RESET 7 /* active low */ + +#define WL341V3_KEYS_POLL_INTERVAL 20 +#define WL341V3_KEYS_DEBOUNCE_INTERVAL (3 * WL341V3_KEYS_POLL_INTERVAL) + +static struct gpio_led wl341v3_leds_gpio[] __initdata = { + { + .name = "wl341v3:amber:first", + .gpio = WL341V3_GPIO_LED_FIRST_AMBER, + .active_low = 1, + }, { + .name = "wl341v3:blue:first", + .gpio = WL341V3_GPIO_LED_FIRST_BLUE, + .active_low = 1, + }, { + .name = "wl341v3:amber:third", + .gpio = WL341V3_GPIO_LED_THIRD_AMBER, + .active_low = 1, + }, { + .name = "wl341v3:blue:third", + .gpio = WL341V3_GPIO_LED_THIRD_BLUE, + .active_low = 1, + }, { + .name = "wl341v3:blue:fourth", + .gpio = WL341V3_GPIO_LED_FOURTH_BLUE, + .active_low = 1, + }, { + .name = "wl341v3:amber:fifth", + .gpio = WL341V3_GPIO_LED_FIFTH_AMBER, + .active_low = 1, + }, { + .name = "wl341v3:blue:fifth", + .gpio = WL341V3_GPIO_LED_FIFTH_BLUE, + .active_low = 1, + } +}; + +static struct gpio_keys_button wl341v3_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL341V3_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL341V3_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WL341V3_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL341V3_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init wl341v3_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(wl341v3_leds_gpio), + wl341v3_leds_gpio); + ramips_register_gpio_buttons(-1, WL341V3_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wl341v3_gpio_buttons), + wl341v3_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_WL341V3, "WL341V3", "Sitecom WL-341 v3", + wl341v3_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl351.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl351.c new file mode 100644 index 0000000..8c0caad --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl351.c @@ -0,0 +1,118 @@ +/* + * Sitecom WL-351 v1 002 board support + * + * Copyright (C) 2011 Tobias Diedrich <ranma+openwrt@tdiedrich.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <linux/rtl8366.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WL351_GPIO_LED_POWER_AMBER 8 +#define WL351_GPIO_LED_UNPOPULATED_AMBER 12 +#define WL351_GPIO_LED_UNPOPULATED_BLUE 13 + +#define WL351_GPIO_BUTTON_RESET 10 +#define WL351_GPIO_BUTTON_WPS 0 + +#define WL351_KEYS_POLL_INTERVAL 20 +#define WL351_KEYS_DEBOUNCE_INTERVAL (3 * WL351_KEYS_POLL_INTERVAL) + +static struct gpio_led wl351_leds_gpio[] __initdata = { + { + .name = "wl-351:amber:power", + .gpio = WL351_GPIO_LED_POWER_AMBER, + .active_low = 1, + }, { + .name = "wl-351:amber:unpopulated", + .gpio = WL351_GPIO_LED_UNPOPULATED_AMBER, + .active_low = 1, + }, { + .name = "wl-351:blue:unpopulated", + .gpio = WL351_GPIO_LED_UNPOPULATED_BLUE, + .active_low = 1, + } +}; + + +static struct gpio_keys_button wl351_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL351_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL351_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WL351_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL351_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct rtl8366_platform_data wl351_switch_data = { + .gpio_sda = RT305X_GPIO_I2C_SD, + .gpio_sck = RT305X_GPIO_I2C_SCLK, +}; + +static struct platform_device wl351_switch = { + .name = RTL8366RB_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &wl351_switch_data, + } +}; + +static void __init wl351_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT) | + RT305X_GPIO_MODE_I2C | + RT305X_GPIO_MODE_SPI | + RT305X_GPIO_MODE_MDIO); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(wl351_leds_gpio), + wl351_leds_gpio); + ramips_register_gpio_buttons(-1, WL351_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wl351_gpio_buttons), + wl351_gpio_buttons); + /* External RTL8366RB. */ + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; + rt305x_esw_data.reg_initval_fct2 = 0x0002500c; + /* + * ext phy base addr 31, rx/tx clock skew 0, + * turbo mii off, rgmi 3.3v off, port 5 polling off + * port5: enabled, gige, full-duplex, rx/tx-flow-control + * port6: enabled, gige, full-duplex, rx/tx-flow-control + */ + rt305x_esw_data.reg_initval_fpa2 = 0x1f003fff; + rt305x_register_ethernet(); + platform_device_register(&wl351_switch); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_WL351, "WL-351", "Sitecom WL-351 v1 002", + wl351_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr512-3gn.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr512-3gn.c new file mode 100644 index 0000000..eed7523 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr512-3gn.c @@ -0,0 +1,110 @@ +/* + * Unbranded router from DX board support + * Also known as *WR512*-3GN by local vendors + * e.g. WS-WR512N1, Sin Hon SH-WR512NU, and etc + * (http://www.dealextreme.com/p/portable-wireless-n-3g-router-cdma2000-evdo-td-scdma-hspa-wcdma-45639) + * This router is also known to be rebranded and sold by a number of local + * vendors in several countries. + * + * Copyright (C) 2011 Andrew Andrianov <necromant@necromant.ath.cx> + * Based on MOFI3500-3N code by + * Copyright (C) 2011 Layne Edwards <ledwards76@gmail.com> + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + + +#define WR512_3GN_GPIO_LED_3G 9 +#define WR512_3GN_GPIO_LED_GATEWAY 11 +#define WR512_3GN_GPIO_LED_AP 12 +#define WR512_3GN_GPIO_LED_STATION 13 +#define WR512_3GN_GPIO_LED_WPS 14 + +#define WR512_3GN_GPIO_BUTTON_RESET 10 +#define WR512_3GN_GPIO_BUTTON_CONNECT 7 +#define WR512_3GN_GPIO_BUTTON_WPS 0 +#define WR512_3GN_GPIO_BUTTON_WPS2 8 + +#define WR512_3GN_KEYS_POLL_INTERVAL 20 +#define WR512_3GN_KEYS_DEBOUNCE_INTERVAL (3 * WR512_3GN_KEYS_POLL_INTERVAL) + +static struct gpio_led wr512_3gn_leds_gpio[] __initdata = { + { + .name = "wr512:green:3g", + .gpio = WR512_3GN_GPIO_LED_3G, + .active_low = 1, + }, { + .name = "wr512:green:gateway", + .gpio = WR512_3GN_GPIO_LED_GATEWAY, + .active_low = 1, + }, { + .name = "wr512:green:ap", + .gpio = WR512_3GN_GPIO_LED_AP, + .active_low = 1, + }, { + .name = "wr512:green:wps", + .gpio = WR512_3GN_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "wr512:green:station", + .gpio = WR512_3GN_GPIO_LED_STATION, + .active_low = 1, + } +}; + +static struct gpio_keys_button wr512_3gn_gpio_buttons[] __initdata = { + { + .desc = "reset_wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WR512_3GN_KEYS_DEBOUNCE_INTERVAL, + .gpio = WR512_3GN_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "mode", + .type = EV_KEY, + .code = KEY_M, + .debounce_interval = WR512_3GN_KEYS_DEBOUNCE_INTERVAL, + .gpio = WR512_3GN_GPIO_BUTTON_CONNECT, + .active_low = 1, + } +}; + +#define WR512_3GN_GPIO_MODE \ + ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ + RT305X_GPIO_MODE_MDIO) + +static void __init wr512_3gn_init(void) +{ + rt305x_gpio_init(WR512_3GN_GPIO_MODE); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(wr512_3gn_leds_gpio), + wr512_3gn_leds_gpio); + ramips_register_gpio_buttons(-1, WR512_3GN_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wr512_3gn_gpio_buttons), + wr512_3gn_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_WR512_3GN, "WR512-3GN", "WR512-3GN-like router", + wr512_3gn_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr6202.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr6202.c new file mode 100644 index 0000000..591d9ce --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr6202.c @@ -0,0 +1,90 @@ +/* + * AWB WR6202 board support + * + * Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include<linux/init.h> +#include<linux/platform_device.h> +#include<linux/gpio.h> + +#include<asm/mach-ralink/machine.h> +#include<asm/mach-ralink/dev-gpio-buttons.h> +#include<asm/mach-ralink/dev-gpio-leds.h> +#include<asm/mach-ralink/rt305x.h> +#include<asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WR6202_GPIO_BUTTON_RESET 10 /* active low */ +#define WR6202_GPIO_BUTTON_WPS 0 /* active low */ + +#define WR6202_KEYS_POLL_INTERVAL 20 +#define WR6202_KEYS_DEBOUNCE_INTERVAL (3 * WR6202_KEYS_POLL_INTERVAL) + +#define WR6202_GPIO_USB_POWER 11 + +#define WR6202_GPIO_LED_3G 13 +#define WR6202_GPIO_LED_WPS 14 + +static struct gpio_led wr6202_leds_gpio[] __initdata = { + { + .name = "wr6202:blue:wps", + .gpio = WR6202_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "wr6202:blue:3g", + .gpio = WR6202_GPIO_LED_3G, + .active_low = 1, + } +}; + +static struct gpio_keys_button wr6202_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WR6202_KEYS_DEBOUNCE_INTERVAL, + .gpio = WR6202_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WR6202_KEYS_DEBOUNCE_INTERVAL, + .gpio = WR6202_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init wr6202_init(void) +{ + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(wr6202_leds_gpio), + wr6202_leds_gpio); + ramips_register_gpio_buttons(-1, WR6202_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wr6202_gpio_buttons), + wr6202_gpio_buttons); + + /* Power to the USB port is controlled by GPIO line */ + gpio_request(WR6202_GPIO_USB_POWER, "WR6202_GPIO_USB_POWER"); + gpio_direction_output(WR6202_GPIO_USB_POWER, 0); + gpio_free(WR6202_GPIO_USB_POWER); + + rt305x_register_flash(0); + + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_WR6202, "WR6202", "AWB WR6202", + wr6202_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-xdx-rn502j.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-xdx-rn502j.c new file mode 100644 index 0000000..f7ef353 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-xdx-rn502j.c @@ -0,0 +1,79 @@ +/* + * Unknown router name/model, PCB marked with XDX-RN502J + * + * Copyright (C) 2011 Bruno Schwander bruno@tinkerbox.org + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define XDXRN502J_GPIO_BUTTON_RESET 12 +#define XDXRN502J_GPIO_LED_WIFI 7 +#define XDXRN502J_GPIO_LED_POWER 9 + +#define XDXRN502J_BUTTONS_POLL_INTERVAL 20 +#define XDXRN502J_BUTTONS_DEBOUNCE_INTERVAL (3 * XDXRN502J_BUTTONS_POLL_INTERVAL) + + +static struct gpio_led xdxrn502j_leds_gpio[] __initdata = { + { + .name = "xdxrn502j:green:wifi", + .gpio = XDXRN502J_GPIO_LED_WIFI, + .active_low = 1, + }, { + .name = "xdxrn502j:green:power", + .gpio = XDXRN502J_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static struct gpio_keys_button xdxrn502j_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = XDXRN502J_BUTTONS_DEBOUNCE_INTERVAL, + .gpio = XDXRN502J_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +#define XDXRN502J_GPIO_MODE \ + ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ + RT305X_GPIO_MODE_MDIO) + +static void __init xdxrn502j_init(void) +{ + rt305x_gpio_init(XDXRN502J_GPIO_MODE); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(xdxrn502j_leds_gpio), + xdxrn502j_leds_gpio); + + ramips_register_gpio_buttons(-1, XDXRN502J_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(xdxrn502j_gpio_buttons), + xdxrn502j_gpio_buttons); + + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_XDXRN502J, "XDXRN502J", "XDX RN502J", + xdxrn502j_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/rt305x.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/rt305x.c new file mode 100644 index 0000000..8a7a58b --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/rt305x.c @@ -0,0 +1,247 @@ +/* + * Ralink RT305x SoC specific setup + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/mipsregs.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/ramips_gpio.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +void __iomem * rt305x_sysc_base; +void __iomem * rt305x_memc_base; +enum rt305x_soc_type rt305x_soc; + +static unsigned long rt5350_get_mem_size(void) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); + unsigned long ret; + u32 t; + + t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG); + t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) & + RT5350_SYSCFG0_DRAM_SIZE_MASK; + + switch (t) { + case RT5350_SYSCFG0_DRAM_SIZE_2M: + ret = 2 * 1024 * 1024; + break; + case RT5350_SYSCFG0_DRAM_SIZE_8M: + ret = 8 * 1024 * 1024; + break; + case RT5350_SYSCFG0_DRAM_SIZE_16M: + ret = 16 * 1024 * 1024; + break; + case RT5350_SYSCFG0_DRAM_SIZE_32M: + ret = 32 * 1024 * 1024; + break; + case RT5350_SYSCFG0_DRAM_SIZE_64M: + ret = 64 * 1024 * 1024; + break; + default: + panic("rt5350: invalid DRAM size: %u", t); + break; + } + + return ret; +} + +void __init ramips_soc_prom_init(void) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); + const char *name = "unknown"; + u32 n0; + u32 n1; + u32 id; + + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); + n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); + + if (n0 == RT3052_CHIP_NAME0 && n1 == RT3052_CHIP_NAME1) { + unsigned long icache_sets; + + icache_sets = (read_c0_config1() >> 22) & 7; + if (icache_sets == 1) { + rt305x_soc = RT305X_SOC_RT3050; + name = "RT3050"; + } else { + rt305x_soc = RT305X_SOC_RT3052; + name = "RT3052"; + } + } else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) { + rt305x_soc = RT305X_SOC_RT3350; + name = "RT3350"; + } else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) { + rt305x_soc = RT305X_SOC_RT3352; + name = "RT3352"; + } else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) { + rt305x_soc = RT305X_SOC_RT5350; + name = "RT5350"; + } else { + panic("rt305x: unknown SoC, n0:%08x n1:%08x\n", n0, n1); + } + + id = __raw_readl(sysc + SYSC_REG_CHIP_ID); + + snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN, + "Ralink %s id:%u rev:%u", + name, + (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, + (id & CHIP_ID_REV_MASK)); + + ramips_mem_base = RT305X_SDRAM_BASE; + + if (soc_is_rt5350()) { + ramips_get_mem_size = rt5350_get_mem_size; + } else if (soc_is_rt305x() || soc_is_rt3350() ) { + ramips_mem_size_min = RT305X_MEM_SIZE_MIN; + ramips_mem_size_max = RT305X_MEM_SIZE_MAX; + } else if (soc_is_rt3352()) { + ramips_mem_size_min = RT3352_MEM_SIZE_MIN; + ramips_mem_size_max = RT3352_MEM_SIZE_MAX; + } else { + BUG(); + } +} + +static struct ramips_gpio_chip rt305x_gpio_chips[] = { + { + .chip = { + .label = "RT305X-GPIO0", + .base = 0, + .ngpio = 24, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x00, + [RAMIPS_GPIO_REG_EDGE] = 0x04, + [RAMIPS_GPIO_REG_RENA] = 0x08, + [RAMIPS_GPIO_REG_FENA] = 0x0c, + [RAMIPS_GPIO_REG_DATA] = 0x20, + [RAMIPS_GPIO_REG_DIR] = 0x24, + [RAMIPS_GPIO_REG_POL] = 0x28, + [RAMIPS_GPIO_REG_SET] = 0x2c, + [RAMIPS_GPIO_REG_RESET] = 0x30, + [RAMIPS_GPIO_REG_TOGGLE] = 0x34, + }, + .map_base = RT305X_PIO_BASE, + .map_size = RT305X_PIO_SIZE, + }, + { + .chip = { + .label = "RT305X-GPIO1", + .base = 24, + .ngpio = 16, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x38, + [RAMIPS_GPIO_REG_EDGE] = 0x3c, + [RAMIPS_GPIO_REG_RENA] = 0x40, + [RAMIPS_GPIO_REG_FENA] = 0x44, + [RAMIPS_GPIO_REG_DATA] = 0x48, + [RAMIPS_GPIO_REG_DIR] = 0x4c, + [RAMIPS_GPIO_REG_POL] = 0x50, + [RAMIPS_GPIO_REG_SET] = 0x54, + [RAMIPS_GPIO_REG_RESET] = 0x58, + [RAMIPS_GPIO_REG_TOGGLE] = 0x5c, + }, + .map_base = RT305X_PIO_BASE, + .map_size = RT305X_PIO_SIZE, + }, + { + .chip = { + .label = "RT305X-GPIO2", + .base = 40, + .ngpio = 12, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x60, + [RAMIPS_GPIO_REG_EDGE] = 0x64, + [RAMIPS_GPIO_REG_RENA] = 0x68, + [RAMIPS_GPIO_REG_FENA] = 0x6c, + [RAMIPS_GPIO_REG_DATA] = 0x70, + [RAMIPS_GPIO_REG_DIR] = 0x74, + [RAMIPS_GPIO_REG_POL] = 0x78, + [RAMIPS_GPIO_REG_SET] = 0x7c, + [RAMIPS_GPIO_REG_RESET] = 0x80, + [RAMIPS_GPIO_REG_TOGGLE] = 0x84, + }, + .map_base = RT305X_PIO_BASE, + .map_size = RT305X_PIO_SIZE, + }, +}; + +static struct ramips_gpio_data rt305x_gpio_data = { + .chips = rt305x_gpio_chips, + .num_chips = ARRAY_SIZE(rt305x_gpio_chips), +}; + +static void rt305x_gpio_reserve(int first, int last) +{ + for (; first <= last; first++) + gpio_request(first, "reserved"); +} + +void __init rt305x_gpio_init(u32 mode) +{ + u32 t; + + rt305x_sysc_wr(mode, SYSC_REG_GPIO_MODE); + + ramips_gpio_init(&rt305x_gpio_data); + if ((mode & RT305X_GPIO_MODE_I2C) == 0) + rt305x_gpio_reserve(RT305X_GPIO_I2C_SD, RT305X_GPIO_I2C_SCLK); + + if ((mode & RT305X_GPIO_MODE_SPI) == 0) + rt305x_gpio_reserve(RT305X_GPIO_SPI_EN, RT305X_GPIO_SPI_CLK); + + t = mode >> RT305X_GPIO_MODE_UART0_SHIFT; + t &= RT305X_GPIO_MODE_UART0_MASK; + switch (t) { + case RT305X_GPIO_MODE_UARTF: + case RT305X_GPIO_MODE_PCM_UARTF: + case RT305X_GPIO_MODE_PCM_I2S: + case RT305X_GPIO_MODE_I2S_UARTF: + rt305x_gpio_reserve(RT305X_GPIO_7, RT305X_GPIO_14); + break; + case RT305X_GPIO_MODE_PCM_GPIO: + rt305x_gpio_reserve(RT305X_GPIO_10, RT305X_GPIO_14); + break; + case RT305X_GPIO_MODE_GPIO_UARTF: + case RT305X_GPIO_MODE_GPIO_I2S: + rt305x_gpio_reserve(RT305X_GPIO_7, RT305X_GPIO_10); + break; + } + + if ((mode & RT305X_GPIO_MODE_UART1) == 0) + rt305x_gpio_reserve(RT305X_GPIO_UART1_TXD, + RT305X_GPIO_UART1_RXD); + + if ((mode & RT305X_GPIO_MODE_JTAG) == 0) + rt305x_gpio_reserve(RT305X_GPIO_JTAG_TDO, RT305X_GPIO_JTAG_TDI); + + if ((mode & RT305X_GPIO_MODE_MDIO) == 0) + rt305x_gpio_reserve(RT305X_GPIO_MDIO_MDC, + RT305X_GPIO_MDIO_MDIO); + + if ((mode & RT305X_GPIO_MODE_SDRAM) == 0) + rt305x_gpio_reserve(RT305X_GPIO_SDRAM_MD16, + RT305X_GPIO_SDRAM_MD31); + + if ((mode & RT305X_GPIO_MODE_RGMII) == 0) + rt305x_gpio_reserve(RT305X_GPIO_GE0_TXD0, + RT305X_GPIO_GE0_RXCLK); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/setup.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/setup.c new file mode 100644 index 0000000..5a069db --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/setup.c @@ -0,0 +1,88 @@ +/* + * Ralink RT305x SoC specific setup + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mips_machine.h> +#include <asm/reboot.h> +#include <asm/time.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> +#include "common.h" + +static void rt305x_restart(char *command) +{ + rt305x_sysc_wr(RT305X_RESET_SYSTEM, SYSC_REG_RESET_CTRL); + while (1) + if (cpu_wait) + cpu_wait(); +} + +static void rt305x_halt(void) +{ + while (1) + if (cpu_wait) + cpu_wait(); +} + +unsigned int __cpuinit get_c0_compare_irq(void) +{ + return CP0_LEGACY_COMPARE_IRQ; +} + +void __init ramips_soc_setup(void) +{ + struct clk *clk; + + rt305x_sysc_base = ioremap_nocache(RT305X_SYSC_BASE, PAGE_SIZE); + rt305x_memc_base = ioremap_nocache(RT305X_MEMC_BASE, PAGE_SIZE); + + rt305x_clocks_init(); + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type, + clk_get_rate(clk) / 1000000, + (clk_get_rate(clk) % 1000000) * 100 / 1000000); + + _machine_restart = rt305x_restart; + _machine_halt = rt305x_halt; + pm_power_off = rt305x_halt; + + clk = clk_get(NULL, "uart"); + if (IS_ERR(clk)) + panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); + + ramips_early_serial_setup(0, RT305X_UART0_BASE, clk_get_rate(clk), + RT305X_INTC_IRQ_UART0); + ramips_early_serial_setup(1, RT305X_UART1_BASE, clk_get_rate(clk), + RT305X_INTC_IRQ_UART1); +} + +void __init plat_time_init(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + mips_hpt_frequency = clk_get_rate(clk) / 2; +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Kconfig b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Kconfig new file mode 100644 index 0000000..57823f0 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Kconfig @@ -0,0 +1,34 @@ +if RALINK_RT3883 + +menu "Ralink RT3662/RT3883 machine selection" + +config RT3883_MACH_RT_N56U + bool "Asus RT-N56U support" + select HW_HAS_PCI + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT3883_MACH_DIR_645 + bool "D-Link DIR-645 support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT3883_MACH_OMNI_EMB_HPM + bool "Omnima EMB HPM board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT3883_MACH_TEW_691GR + bool "TRENDnet TEW-691GR support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT3883_MACH_TEW_692GR + bool "TRENDnet TEW-692GR support" + select HW_HAS_PCI + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +endmenu + +endif diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Makefile b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Makefile new file mode 100644 index 0000000..e1ab61e --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for the Ralink RT3662/RT3883 SoC specific parts of the kernel +# +# Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation. + +obj-y := irq.o setup.o devices.o rt3883.o clock.o + +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-$(CONFIG_RT3883_MACH_DIR_645) += mach-dir-645.o +obj-$(CONFIG_RT3883_MACH_OMNI_EMB_HPM) += mach-omni-emb-hpm.o +obj-$(CONFIG_RT3883_MACH_RT_N56U) += mach-rt-n56u.o +obj-$(CONFIG_RT3883_MACH_TEW_691GR) += mach-tew-691gr.o +obj-$(CONFIG_RT3883_MACH_TEW_692GR) += mach-tew-692gr.o diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/clock.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/clock.c new file mode 100644 index 0000000..bf70259 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/clock.c @@ -0,0 +1,103 @@ +/* + * Ralink RT3662/RT3883 clock API + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include "common.h" + +struct clk { + unsigned long rate; +}; + +static struct clk rt3883_cpu_clk; +static struct clk rt3883_sys_clk; +static struct clk rt3883_wdt_clk; +static struct clk rt3883_uart_clk; + +void __init rt3883_clocks_init(void) +{ + u32 syscfg0; + u32 clksel; + u32 ddr2; + + syscfg0 = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG0); + clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) & + RT3883_SYSCFG0_CPUCLK_MASK); + ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2; + + switch (clksel) { + case RT3883_SYSCFG0_CPUCLK_250: + rt3883_cpu_clk.rate = 250000000; + rt3883_sys_clk.rate = (ddr2) ? 125000000 : 83000000; + break; + case RT3883_SYSCFG0_CPUCLK_384: + rt3883_cpu_clk.rate = 384000000; + rt3883_sys_clk.rate = (ddr2) ? 128000000 : 96000000; + break; + case RT3883_SYSCFG0_CPUCLK_480: + rt3883_cpu_clk.rate = 480000000; + rt3883_sys_clk.rate = (ddr2) ? 160000000 : 120000000; + break; + case RT3883_SYSCFG0_CPUCLK_500: + rt3883_cpu_clk.rate = 500000000; + rt3883_sys_clk.rate = (ddr2) ? 166000000 : 125000000; + break; + } + + rt3883_wdt_clk.rate = rt3883_sys_clk.rate; + rt3883_uart_clk.rate = 40000000; +} + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "sys")) + return &rt3883_sys_clk; + + if (!strcmp(id, "cpu")) + return &rt3883_cpu_clk; + + if (!strcmp(id, "wdt")) + return &rt3883_wdt_clk; + + if (!strcmp(id, "uart")) + return &rt3883_uart_clk; + + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/common.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/common.h new file mode 100644 index 0000000..a389dcc --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/common.h @@ -0,0 +1,16 @@ +/* + * Ralink RT3662/RT3883 SoC common defines + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_COMMON_H +#define _RT3883_COMMON_H + +void rt3883_clocks_init(void); + +#endif /* _RT3883_COMMON_H */
\ No newline at end of file diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.c new file mode 100644 index 0000000..6077e97 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.c @@ -0,0 +1,398 @@ +/* + * Ralink RT3662/RT3883 SoC platform device registration + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/partitions.h> +#include <linux/dma-mapping.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/rt2x00_platform.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> + +#include <asm/addrspace.h> + +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include <asm/mach-ralink/ramips_nand_platform.h> +#include "devices.h" + +#include <ramips_eth_platform.h> + +static struct resource rt3883_flash0_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = RT3883_BOOT_BASE, + .end = RT3883_BOOT_BASE + RT3883_BOOT_SIZE - 1, + }, +}; + +struct physmap_flash_data rt3883_flash0_data; +static struct platform_device rt3883_flash0_device = { + .name = "physmap-flash", + .resource = rt3883_flash0_resources, + .num_resources = ARRAY_SIZE(rt3883_flash0_resources), + .dev = { + .platform_data = &rt3883_flash0_data, + }, +}; + +static struct resource rt3883_flash1_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = RT3883_SRAM_BASE, + .end = RT3883_SRAM_BASE + RT3883_SRAM_SIZE - 1, + }, +}; + +struct physmap_flash_data rt3883_flash1_data; +static struct platform_device rt3883_flash1_device = { + .name = "physmap-flash", + .resource = rt3883_flash1_resources, + .num_resources = ARRAY_SIZE(rt3883_flash1_resources), + .dev = { + .platform_data = &rt3883_flash1_data, + }, +}; + +static int rt3883_flash_instance __initdata; +void __init rt3883_register_pflash(unsigned int id) +{ + struct platform_device *pdev; + struct physmap_flash_data *pdata; + void __iomem *fscc_base; + u32 t; + int reg; + + switch (id) { + case 0: + pdev = &rt3883_flash0_device; + reg = RT3883_FSCC_REG_FLASH_CFG0; + break; + case 1: + pdev = &rt3883_flash1_device; + reg = RT3883_FSCC_REG_FLASH_CFG1; + break; + default: + return; + } + + pdata = pdev->dev.platform_data; + + fscc_base = ioremap(RT3883_FSCC_BASE, RT3883_FSCC_SIZE); + if (!fscc_base) + panic("RT3883: ioremap failed for FSCC"); + + t = __raw_readl(fscc_base + reg); + iounmap(fscc_base); + + t = (t >> RT3883_FLASH_CFG_WIDTH_SHIFT) & RT3883_FLASH_CFG_WIDTH_MASK; + switch (t) { + case RT3883_FLASH_CFG_WIDTH_8BIT: + pdata->width = 1; + break; + case RT3883_FLASH_CFG_WIDTH_16BIT: + pdata->width = 2; + break; + case RT3883_FLASH_CFG_WIDTH_32BIT: + if (id == 1) { + pdata->width = 4; + break; + } + /* fallthrough */ + default: + pr_warn("RT3883: flash bank%d: invalid width detected\n", id); + return; + } + + pdev->id = rt3883_flash_instance; + + platform_device_register(pdev); + rt3883_flash_instance++; +} + +static atomic_t rt3883_usb_pwr_ref = ATOMIC_INIT(0); + +static int rt3883_usb_power_on(struct platform_device *pdev) +{ + + if (atomic_inc_return(&rt3883_usb_pwr_ref) == 1) { + u32 t; + + t = rt3883_sysc_rr(RT3883_SYSC_REG_USB_PS); + + /* enable clock for port0's and port1's phys */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1); + t |= RT3883_CLKCFG1_UPHY0_CLK_EN | RT3883_CLKCFG1_UPHY1_CLK_EN; + rt3883_sysc_wr(t, RT3883_SYSC_REG_CLKCFG1); + mdelay(500); + + /* pull USBHOST and USBDEV out from reset */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); + t &= ~(RT3883_RSTCTRL_UHST | RT3883_RSTCTRL_UDEV); + rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL); + mdelay(500); + + /* enable host mode */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); + t |= RT3883_SYSCFG1_USB0_HOST_MODE; + rt3883_sysc_wr(t, RT3883_SYSC_REG_SYSCFG1); + + t = rt3883_sysc_rr(RT3883_SYSC_REG_USB_PS); + } + + return 0; +} + +static void rt3883_usb_power_off(struct platform_device *pdev) +{ + if (atomic_dec_return(&rt3883_usb_pwr_ref) == 0) { + u32 t; + + /* put USBHOST and USBDEV into reset */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); + t |= RT3883_RSTCTRL_UHST | RT3883_RSTCTRL_UDEV; + rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL); + udelay(10000); + + /* disable clock for port0's and port1's phys*/ + t = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1); + t &= ~(RT3883_CLKCFG1_UPHY0_CLK_EN | + RT3883_CLKCFG1_UPHY1_CLK_EN); + rt3883_sysc_wr(t, RT3883_SYSC_REG_CLKCFG1); + udelay(10000); + } +} + +static struct usb_ehci_pdata rt3883_ehci_data = { + .power_on = rt3883_usb_power_on, + .power_off = rt3883_usb_power_off, +}; + +static struct resource rt3883_ehci_resources[] = { + { + .start = RT3883_EHCI_BASE, + .end = RT3883_EHCI_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT3883_INTC_IRQ_UHST, + .end = RT3883_INTC_IRQ_UHST, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 rt3883_ehci_dmamask = DMA_BIT_MASK(32); +static struct platform_device rt3883_ehci_device = { + .name = "ehci-platform", + .id = -1, + .resource = rt3883_ehci_resources, + .num_resources = ARRAY_SIZE(rt3883_ehci_resources), + .dev = { + .dma_mask = &rt3883_ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &rt3883_ehci_data, + }, +}; + +static struct resource rt3883_ohci_resources[] = { + { + .start = RT3883_OHCI_BASE, + .end = RT3883_OHCI_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT3883_INTC_IRQ_UHST, + .end = RT3883_INTC_IRQ_UHST, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct usb_ohci_pdata rt3883_ohci_data = { + .power_on = rt3883_usb_power_on, + .power_off = rt3883_usb_power_off, +}; + +static u64 rt3883_ohci_dmamask = DMA_BIT_MASK(32); +static struct platform_device rt3883_ohci_device = { + .name = "ohci-platform", + .id = -1, + .resource = rt3883_ohci_resources, + .num_resources = ARRAY_SIZE(rt3883_ohci_resources), + .dev = { + .dma_mask = &rt3883_ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &rt3883_ohci_data, + }, +}; + +void __init rt3883_register_usbhost(void) +{ + platform_device_register(&rt3883_ehci_device); + platform_device_register(&rt3883_ohci_device); +} + +static void rt3883_fe_reset(void) +{ + u32 t; + + t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); + t |= RT3883_RSTCTRL_FE; + rt3883_sysc_wr(t , RT3883_SYSC_REG_RSTCTRL); + + t &= ~RT3883_RSTCTRL_FE; + rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL); +} + +static struct resource rt3883_eth_resources[] = { + { + .start = RT3883_FE_BASE, + .end = RT3883_FE_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT3883_CPU_IRQ_FE, + .end = RT3883_CPU_IRQ_FE, + .flags = IORESOURCE_IRQ, + }, +}; + +struct ramips_eth_platform_data rt3883_eth_data = { + .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 }, + .reset_fe = rt3883_fe_reset, + .min_pkt_len = 64, +}; + +static struct platform_device rt3883_eth_device = { + .name = "ramips_eth", + .resource = rt3883_eth_resources, + .num_resources = ARRAY_SIZE(rt3883_eth_resources), + .dev = { + .platform_data = &rt3883_eth_data, + } +}; + +void __init rt3883_register_ethernet(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "sys"); + if (IS_ERR(clk)) + panic("unable to get SYS clock, err=%ld", PTR_ERR(clk)); + + rt3883_eth_data.sys_freq = clk_get_rate(clk); + + platform_device_register(&rt3883_eth_device); +} + +static struct resource rt3883_wlan_resources[] = { + { + .start = RT3883_WLAN_BASE, + .end = RT3883_WLAN_BASE + 0x3FFFF, + .flags = IORESOURCE_MEM, + }, { + .start = RT3883_CPU_IRQ_WLAN, + .end = RT3883_CPU_IRQ_WLAN, + .flags = IORESOURCE_IRQ, + }, +}; + +struct rt2x00_platform_data rt3883_wlan_data; +static struct platform_device rt3883_wlan_device = { + .name = "rt2800_wmac", + .resource = rt3883_wlan_resources, + .num_resources = ARRAY_SIZE(rt3883_wlan_resources), + .dev = { + .platform_data = &rt3883_wlan_data, + } +}; + +void __init rt3883_register_wlan(void) +{ + rt3883_wlan_data.eeprom_file_name = "soc_wmac.eeprom", + platform_device_register(&rt3883_wlan_device); +} + +static struct resource rt3883_wdt_resources[] = { + { + .start = RT3883_TIMER_BASE, + .end = RT3883_TIMER_BASE + RT3883_TIMER_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rt3883_wdt_device = { + .name = "ramips-wdt", + .id = -1, + .resource = rt3883_wdt_resources, + .num_resources = ARRAY_SIZE(rt3883_wdt_resources), +}; + +void __init rt3883_register_wdt(bool enable_reset) +{ + if (enable_reset) { + u32 t; + + /* enable WDT reset output on GPIO 2 */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); + t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT; + rt3883_sysc_wr(t, RT3883_SYSC_REG_SYSCFG1); + } + + platform_device_register(&rt3883_wdt_device); +} + +static struct resource rt3883_nand_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = RT3883_NANDC_BASE, + .end = RT3883_NANDC_BASE + RT3883_NANDC_SIZE - 1, + }, +}; + +struct ramips_nand_platform_data rt3883_nand_data; +static struct platform_device rt3883_nand_device = { + .name = RAMIPS_NAND_DRIVER_NAME, + .id = -1, + .resource = rt3883_nand_resources, + .num_resources = ARRAY_SIZE(rt3883_nand_resources), + .dev = { + .platform_data = &rt3883_nand_data, + }, +}; + +void __init rt3883_register_nand(void) +{ + platform_device_register(&rt3883_nand_device); +} + +static struct resource rt3883_spi_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = RT3883_SPI_BASE, + .end = RT3883_SPI_BASE + RT3883_SPI_SIZE - 1, + }, +}; + +static struct platform_device rt3883_spi_device = { + .name = "ramips-spi", + .id = 0, + .resource = rt3883_spi_resources, + .num_resources = ARRAY_SIZE(rt3883_spi_resources), +}; + +void __init rt3883_register_spi(struct spi_board_info *info, int n) +{ + spi_register_board_info(info, n); + platform_device_register(&rt3883_spi_device); +} + diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.h new file mode 100644 index 0000000..808bcb2 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.h @@ -0,0 +1,34 @@ +/* + * Ralink RT3662/3883 SoC specific platform device definitions + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_DEVICES_H +#define _RT3883_DEVICES_H + +struct physmap_flash_data; +struct spi_board_info; + +extern struct physmap_flash_data rt3883_flash0_data; +extern struct physmap_flash_data rt3883_flash1_data; +void rt3883_register_pflash(unsigned int id); + +extern struct ramips_nand_platform_data rt3883_nand_data; +void rt3883_register_nand(void); + +extern struct ramips_eth_platform_data rt3883_eth_data; +void rt3883_register_ethernet(void); +void rt3883_register_usbhost(void); + +extern struct rt2x00_platform_data rt3883_wlan_data; +void rt3883_register_wlan(void); +void rt3883_register_wdt(bool enable_reset); + +void rt3883_register_spi(struct spi_board_info *info, int n); + +#endif /* _RT3883_DEVICES_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/early_printk.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/early_printk.c new file mode 100644 index 0000000..e3bf7ba --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/early_printk.c @@ -0,0 +1,29 @@ +/* + * Ralink RT3662/RT3883 SoC early printk support + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/serial_reg.h> + +#include <asm/addrspace.h> + +#include <asm/mach-ralink/rt3883_regs.h> + +#define UART_READ(r) \ + __raw_readl((void __iomem *)(KSEG1ADDR(RT3883_UART1_BASE) + 4 * (r))) + +#define UART_WRITE(r, v) \ + __raw_writel((v), (void __iomem *)(KSEG1ADDR(RT3883_UART1_BASE) + 4 * (r))) + +void prom_putchar(unsigned char ch) +{ + while (((UART_READ(RT3883_UART_REG_LSR)) & UART_LSR_THRE) == 0); + UART_WRITE(RT3883_UART_REG_TX, ch); + while (((UART_READ(RT3883_UART_REG_LSR)) & UART_LSR_THRE) == 0); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/irq.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/irq.c new file mode 100644 index 0000000..b561fd3 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/irq.c @@ -0,0 +1,84 @@ +/* + * Ralink RT3662/RT3883 SoC specific interrupt handling + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> + +static void rt3883_intc_irq_dispatch(void) +{ + u32 pending; + + pending = ramips_intc_get_status(); + + if (pending & RT3883_INTC_INT_TIMER0) + do_IRQ(RT3883_INTC_IRQ_TIMER0); + + else if (pending & RT3883_INTC_INT_TIMER1) + do_IRQ(RT3883_INTC_IRQ_TIMER1); + + else if (pending & RT3883_INTC_INT_UART0) + do_IRQ(RT3883_INTC_IRQ_UART0); + + else if (pending & RT3883_INTC_INT_UART1) + do_IRQ(RT3883_INTC_IRQ_UART1); + + else if (pending & RT3883_INTC_INT_PERFC) + do_IRQ(RT3883_INTC_IRQ_PERFC); + + else if (pending & RT3883_INTC_INT_UHST) + do_IRQ(RT3883_INTC_IRQ_UHST); + + /* TODO: handle PIO interrupts as well */ + + else + spurious_interrupt(); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long pending; + + pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) + do_IRQ(RT3883_CPU_IRQ_COUNTER); + + else if (pending & STATUSF_IP5) + do_IRQ(RT3883_CPU_IRQ_FE); + + else if (pending & STATUSF_IP6) + do_IRQ(RT3883_CPU_IRQ_WLAN); + + else if (pending & STATUSF_IP4) + do_IRQ(RT3883_CPU_IRQ_PCI); + + else if (pending & STATUSF_IP2) + rt3883_intc_irq_dispatch(); + + else + spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(); + ramips_intc_irq_init(RT3883_INTC_BASE, RT3883_CPU_IRQ_INTC, + RT3883_INTC_IRQ_BASE); + cp0_perfcount_irq = RT3883_INTC_IRQ_PERFC; +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-dir-645.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-dir-645.c new file mode 100644 index 0000000..825da27 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-dir-645.c @@ -0,0 +1,152 @@ +/* + * D-Link DIR-645 board support + * + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/rtl8367.h> +#include <linux/ethtool.h> +#include <linux/rt2x00_platform.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define DIR_645_GPIO_LED_INET 0 +#define DIR_645_GPIO_LED_WPS 26 + +#define DIR_645_GPIO_BUTTON_RESET 9 +#define DIR_645_GPIO_BUTTON_WPS 14 + +#define DIR_645_GPIO_USB_POWER 30 + +#define DIR_645_GPIO_RTL8367_SCK 2 +#define DIR_645_GPIO_RTL8367_SDA 1 + +#define DIR_645_KEYS_POLL_INTERVAL 20 +#define DIR_645_KEYS_DEBOUNCE_INTERVAL (3 * DIR_645_KEYS_POLL_INTERVAL) + +static struct gpio_led dir_645_leds_gpio[] __initdata = { + { + .name = "d-link:green:inet", + .gpio = DIR_645_GPIO_LED_INET, + .active_low = 1, + }, + { + .name = "d-link:green:wps", + .gpio = DIR_645_GPIO_LED_WPS, + .active_low = 1, + }, +}; + +static struct gpio_keys_button dir_645_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_645_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_645_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_645_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_645_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct rtl8367_extif_config dir_645_rtl8367_extif1_cfg = { + .txdelay = 1, + .rxdelay = 0, + .mode = RTL8367_EXTIF_MODE_RGMII, + .ability = { + .force_mode = 1, + .txpause = 1, + .rxpause = 1, + .link = 1, + .duplex = 1, + .speed = RTL8367_PORT_SPEED_1000, + } +}; + +static struct rtl8367_platform_data dir_645_rtl8367_data = { + .gpio_sda = DIR_645_GPIO_RTL8367_SDA, + .gpio_sck = DIR_645_GPIO_RTL8367_SCK, + .extif1_cfg = &dir_645_rtl8367_extif1_cfg, +}; + +static struct platform_device dir_645_rtl8367_device = { + .name = RTL8367B_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &dir_645_rtl8367_data, + } +}; + +static struct spi_board_info dir_645_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + } +}; + +static void __init dir_645_gpio_init(void) +{ + rt3883_gpio_init(RT3883_GPIO_MODE_I2C | + RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | + RT3883_GPIO_MODE_JTAG | + RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC)); + + gpio_request_one(DIR_645_GPIO_USB_POWER, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "USB power"); +} + +static void __init dir_645_init(void) +{ + dir_645_gpio_init(); + + rt3883_register_spi(dir_645_spi_info, + ARRAY_SIZE(dir_645_spi_info)); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_645_leds_gpio), + dir_645_leds_gpio); + + ramips_register_gpio_buttons(-1, DIR_645_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_645_gpio_buttons), + dir_645_gpio_buttons); + + platform_device_register(&dir_645_rtl8367_device); + + rt3883_wlan_data.disable_5ghz = 1; + rt3883_register_wlan(); + + rt3883_eth_data.speed = SPEED_1000; + rt3883_eth_data.duplex = DUPLEX_FULL; + rt3883_eth_data.tx_fc = 1; + rt3883_eth_data.rx_fc = 1; + rt3883_register_ethernet(); + + rt3883_register_wdt(false); + rt3883_register_usbhost(); +} + +MIPS_MACHINE(RAMIPS_MACH_DIR_645, "DIR-645", "D-Link DIR-645", dir_645_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-omni-emb-hpm.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-omni-emb-hpm.c new file mode 100644 index 0000000..77ccff6 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-omni-emb-hpm.c @@ -0,0 +1,157 @@ +/* + * Omnima EMB HPM board support + * + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> +#include <linux/gpio.h> +#include <linux/rt2x00_platform.h> +#include <linux/spi/spi.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define OMNI_EMB_HPM_GPIO_LED_POWER 7 +#define OMNI_EMB_HPM_GPIO_LED_ETH_GREEN 20 +#define OMNI_EMB_HPM_GPIO_LED_ETH_RED 18 +#define OMNI_EMB_HPM_GPIO_LED_STATUS 21 +#define OMNI_EMB_HPM_GPIO_LED_WIFI_GREEN 17 +#define OMNI_EMB_HPM_GPIO_LED_WIFI_RED 19 + +#define OMNI_EMB_HPM_GPIO_BUTTON_RESET 14 + +#define OMNI_EMB_HPM_GPIO_USB0_ENABLE 2 +#define OMNI_EMB_HPM_GPIO_USB1_ENABLE 1 +#define OMNI_EMB_HPM_GPIO_USB0_OC 12 +#define OMNI_EMB_HPM_GPIO_USB1_OC 13 + +#define OMNI_EMB_HPM_KEYS_POLL_INTERVAL 20 +#define OMNI_EMB_HPM_KEYS_DEBOUNCE_INTERVAL (3 * OMNI_EMB_HPM_KEYS_POLL_INTERVAL) + +static struct gpio_led omni_emb_hpm_leds_gpio[] __initdata = { + { + .name = "emb:orange:power", + .gpio = OMNI_EMB_HPM_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "emb:green:status", + .gpio = OMNI_EMB_HPM_GPIO_LED_STATUS, + }, + { + .name = "emb:green:eth", + .gpio = OMNI_EMB_HPM_GPIO_LED_ETH_GREEN, + .active_low = 1, + }, + { + .name = "emb:red:eth", + .gpio = OMNI_EMB_HPM_GPIO_LED_ETH_RED, + .active_low = 1, + }, + { + .name = "emb:green:wifi", + .gpio = OMNI_EMB_HPM_GPIO_LED_WIFI_GREEN, + .active_low = 1, + }, + { + .name = "emb:red:wifi", + .gpio = OMNI_EMB_HPM_GPIO_LED_WIFI_RED, + .active_low = 1, + }, +}; + +static struct gpio_keys_button omni_emb_hpm_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = OMNI_EMB_HPM_KEYS_DEBOUNCE_INTERVAL, + .gpio = OMNI_EMB_HPM_GPIO_BUTTON_RESET, + .active_low = 1, + }, +}; + +static struct spi_board_info omni_emb_hpm_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + } +}; + + +static void __init omni_emb_hpm_gpio_request(unsigned int gpio, + unsigned long flags, + const char *label, + bool free) +{ + int err; + + err = gpio_request_one(gpio, flags, label); + if (err) { + pr_err("EMB_HPM: can't setup GPIO%u (%s), err=%d\n", + gpio, label, err); + return; + } + + if (free) + gpio_free(gpio); +} + +static void __init omni_emb_hpm_gpio_init(void) +{ + rt3883_gpio_init(RT3883_GPIO_MODE_I2C | + RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | + RT3883_GPIO_MODE_JTAG); + + omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB0_ENABLE, + GPIOF_OUT_INIT_HIGH, + "USB0 power", true); + omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB1_ENABLE, + GPIOF_OUT_INIT_HIGH, + "USB1 power", true); + omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB0_OC, + GPIOF_IN, "USB0 OC", false); + omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB1_OC, + GPIOF_IN, "USB1 OC", false); +} + +static void __init omni_emb_hpm_init(void) +{ + omni_emb_hpm_gpio_init(); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(omni_emb_hpm_leds_gpio), + omni_emb_hpm_leds_gpio); + + ramips_register_gpio_buttons(-1, OMNI_EMB_HPM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(omni_emb_hpm_gpio_buttons), + omni_emb_hpm_gpio_buttons); + + rt3883_register_spi(omni_emb_hpm_spi_info, + ARRAY_SIZE(omni_emb_hpm_spi_info)); + + rt3883_register_wlan(); + + rt3883_eth_data.phy_mask = BIT(4); + rt3883_register_ethernet(); + + rt3883_register_wdt(false); + rt3883_register_usbhost(); +} + +MIPS_MACHINE(RAMIPS_MACH_OMNI_EMB_HPM, "OMNI-EMB-HPM", "Omnima EMB HPM", + omni_emb_hpm_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-rt-n56u.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-rt-n56u.c new file mode 100644 index 0000000..99aa03f --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-rt-n56u.c @@ -0,0 +1,155 @@ +/* + * Asus RT-N56U board support + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/rtl8367.h> +#include <linux/ethtool.h> +#include <linux/pci.h> +#include <linux/rt2x00_platform.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define RT_N56U_GPIO_LED_POWER 0 +#define RT_N56U_GPIO_LED_LAN 19 +#define RT_N56U_GPIO_LED_USB 24 +#define RT_N56U_GPIO_LED_WAN 27 +#define RT_N56U_GPIO_BUTTON_RESET 13 +#define RT_N56U_GPIO_BUTTON_WPS 26 + +#define RT_N56U_GPIO_RTL8367_SCK 2 +#define RT_N56U_GPIO_RTL8367_SDA 1 + +#define RT_N56U_KEYS_POLL_INTERVAL 20 +#define RT_N56U_KEYS_DEBOUNCE_INTERVAL (3 * RT_N56U_KEYS_POLL_INTERVAL) + +static struct gpio_led rt_n56u_leds_gpio[] __initdata = { + { + .name = "asus:blue:power", + .gpio = RT_N56U_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "asus:blue:lan", + .gpio = RT_N56U_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "asus:blue:wan", + .gpio = RT_N56U_GPIO_LED_WAN, + .active_low = 1, + }, + { + .name = "asus:blue:usb", + .gpio = RT_N56U_GPIO_LED_USB, + .active_low = 1, + }, +}; + +static struct gpio_keys_button rt_n56u_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RT_N56U_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_N56U_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = RT_N56U_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_N56U_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct rtl8367_extif_config rt_n56u_rtl8367_extif1_cfg = { + .txdelay = 1, + .rxdelay = 0, + .mode = RTL8367_EXTIF_MODE_RGMII, + .ability = { + .force_mode = 1, + .txpause = 1, + .rxpause = 1, + .link = 1, + .duplex = 1, + .speed = RTL8367_PORT_SPEED_1000, + } +}; + +static struct rtl8367_platform_data rt_n56u_rtl8367_data = { + .gpio_sda = RT_N56U_GPIO_RTL8367_SDA, + .gpio_sck = RT_N56U_GPIO_RTL8367_SCK, + .extif1_cfg = &rt_n56u_rtl8367_extif1_cfg, +}; + +static struct platform_device rt_n56u_rtl8367_device = { + .name = RTL8367_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &rt_n56u_rtl8367_data, + } +}; + +static struct rt2x00_platform_data rt_n56u_pci_wlan_data = { + .eeprom_file_name = "rt2x00pci_1_0.eeprom", +}; + +static int rt_n56u_pci_plat_dev_init(struct pci_dev *dev) +{ + if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0) + dev->dev.platform_data = &rt_n56u_pci_wlan_data; + + return 0; +} + +static void __init rt_n56u_init(void) +{ + rt3883_gpio_init(RT3883_GPIO_MODE_I2C | + RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | + RT3883_GPIO_MODE_JTAG | + RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC)); + + rt3883_register_pflash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n56u_leds_gpio), + rt_n56u_leds_gpio); + + ramips_register_gpio_buttons(-1, RT_N56U_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rt_n56u_gpio_buttons), + rt_n56u_gpio_buttons); + + platform_device_register(&rt_n56u_rtl8367_device); + + rt3883_wlan_data.disable_2ghz = 1; + rt3883_register_wlan(); + + rt3883_eth_data.speed = SPEED_1000; + rt3883_eth_data.duplex = DUPLEX_FULL; + rt3883_eth_data.tx_fc = 1; + rt3883_eth_data.rx_fc = 1; + rt3883_register_ethernet(); + + rt3883_register_wdt(false); + rt3883_register_usbhost(); + rt3883_pci_set_plat_dev_init(rt_n56u_pci_plat_dev_init); + rt3883_pci_init(RT3883_PCI_MODE_PCIE); +} + +MIPS_MACHINE(RAMIPS_MACH_RT_N56U, "RT-N56U", "Asus RT-N56U", rt_n56u_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-691gr.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-691gr.c new file mode 100644 index 0000000..7b553ab --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-691gr.c @@ -0,0 +1,103 @@ +/* + * TRENDnet TEW-691GR board support + * + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/rt2x00_platform.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define TEW_691GR_GPIO_LED_WPS_GREEN 9 + +#define TEW_691GR_GPIO_BUTTON_RESET 10 +#define TEW_691GR_GPIO_BUTTON_WPS 26 + +#define TEW_691GR_GPIO_SWITCH_RFKILL 0 + +#define TEW_691GR_KEYS_POLL_INTERVAL 20 +#define TEW_691GR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_691GR_KEYS_POLL_INTERVAL) + +static struct gpio_led tew_691gr_leds_gpio[] __initdata = { + { + .name = "trendnet:green:wps", + .gpio = TEW_691GR_GPIO_LED_WPS_GREEN, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tew_691gr_gpio_buttons[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TEW_691GR_KEYS_DEBOUNCE_INTERVAL, + .gpio = TEW_691GR_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TEW_691GR_KEYS_DEBOUNCE_INTERVAL, + .gpio = TEW_691GR_GPIO_BUTTON_WPS, + .active_low = 1, + }, + { + .desc = "RFKILL switch", + .type = EV_SW, + .code = KEY_RFKILL, + .debounce_interval = TEW_691GR_KEYS_DEBOUNCE_INTERVAL, + .gpio = TEW_691GR_GPIO_SWITCH_RFKILL, + .active_low = 1, + }, +}; + +static void __init tew_691gr_init(void) +{ + rt3883_gpio_init(RT3883_GPIO_MODE_I2C | + RT3883_GPIO_MODE_SPI | + RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | + RT3883_GPIO_MODE_JTAG | + RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC)); + + rt3883_register_pflash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(tew_691gr_leds_gpio), + tew_691gr_leds_gpio); + + ramips_register_gpio_buttons(-1, TEW_691GR_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tew_691gr_gpio_buttons), + tew_691gr_gpio_buttons); + + rt3883_wlan_data.disable_5ghz = 1; + rt3883_register_wlan(); + + rt3883_eth_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + rt3883_eth_data.phy_mask = BIT(0); + rt3883_eth_data.tx_fc = 1; + rt3883_eth_data.rx_fc = 1; + rt3883_register_ethernet(); + + rt3883_register_wdt(false); +} + +MIPS_MACHINE(RAMIPS_MACH_TEW_691GR, "TEW-691GR", "TRENDnet TEW-691GR", + tew_691gr_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-692gr.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-692gr.c new file mode 100644 index 0000000..59b520a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-692gr.c @@ -0,0 +1,147 @@ +/* + * TRENDnet TEW-692GR board support + * + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/rt2x00_platform.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define TEW_692GR_GPIO_LED_WPS_ORANGE 9 +#define TEW_692GR_GPIO_LED_WPS_GREEN 28 + +#define TEW_692GR_GPIO_BUTTON_RESET 10 +#define TEW_692GR_GPIO_BUTTON_WPS 26 + +#define TEW_692GR_KEYS_POLL_INTERVAL 20 +#define TEW_692GR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_692GR_KEYS_POLL_INTERVAL) + +static struct gpio_led tew_692gr_leds_gpio[] __initdata = { + { + .name = "trendnet:orange:wps", + .gpio = TEW_692GR_GPIO_LED_WPS_ORANGE, + .active_low = 1, + }, + { + .name = "trendnet:green:wps", + .gpio = TEW_692GR_GPIO_LED_WPS_GREEN, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tew_692gr_gpio_buttons[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TEW_692GR_KEYS_DEBOUNCE_INTERVAL, + .gpio = TEW_692GR_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TEW_692GR_KEYS_DEBOUNCE_INTERVAL, + .gpio = TEW_692GR_GPIO_BUTTON_WPS, + .active_low = 1, + }, +}; + +static struct ar8327_pad_cfg tew_692gr_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_pad_cfg tew_692gr_ar8327_pad6_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .rxclk_delay_en = true, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, +}; + +static struct ar8327_led_cfg tew_692gr_ar8327_led_cfg = { + .led_ctrl0 = 0xc437c437, + .led_ctrl1 = 0xc337c337, + .led_ctrl2 = 0x00000000, + .led_ctrl3 = 0x03ffff00, + .open_drain = false, +}; + +static struct ar8327_platform_data tew_692gr_ar8327_data = { + .pad0_cfg = &tew_692gr_ar8327_pad0_cfg, + .pad6_cfg = &tew_692gr_ar8327_pad6_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .led_cfg = &tew_692gr_ar8327_led_cfg, +}; + +static struct mdio_board_info tew_692gr_mdio0_info[] = { + { + .bus_id = "ramips_mdio", + .phy_addr = 0, + .platform_data = &tew_692gr_ar8327_data, + }, +}; + +static void __init tew_692gr_init(void) +{ + rt3883_gpio_init(RT3883_GPIO_MODE_I2C | + RT3883_GPIO_MODE_SPI | + RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | + RT3883_GPIO_MODE_JTAG | + RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC)); + + rt3883_register_pflash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(tew_692gr_leds_gpio), + tew_692gr_leds_gpio); + + ramips_register_gpio_buttons(-1, TEW_692GR_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tew_692gr_gpio_buttons), + tew_692gr_gpio_buttons); + + rt3883_wlan_data.disable_5ghz = 1; + rt3883_register_wlan(); + + mdiobus_register_board_info(tew_692gr_mdio0_info, + ARRAY_SIZE(tew_692gr_mdio0_info)); + + rt3883_eth_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + rt3883_eth_data.phy_mask = BIT(0); + rt3883_eth_data.tx_fc = 1; + rt3883_eth_data.rx_fc = 1; + rt3883_register_ethernet(); + + rt3883_register_wdt(false); + + rt3883_pci_init(RT3883_PCI_MODE_PCIE); +} + +MIPS_MACHINE(RAMIPS_MACH_TEW_692GR, "TEW-692GR", "TRENDnet TEW-692GR", + tew_692gr_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/rt3883.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/rt3883.c new file mode 100644 index 0000000..e397b85 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/rt3883.c @@ -0,0 +1,216 @@ +/* + * Ralink RT3662/RT3883 SoC specific setup + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/ramips_gpio.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> + +void __iomem * rt3883_sysc_base; +void __iomem * rt3883_memc_base; + +void __init ramips_soc_prom_init(void) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE); + u32 n0; + u32 n1; + u32 id; + + n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3); + n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7); + id = __raw_readl(sysc + RT3883_SYSC_REG_REVID); + + snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN, + "Ralink %c%c%c%c%c%c%c%c ver:%u eco:%u", + (char) (n0 & 0xff), (char) ((n0 >> 8) & 0xff), + (char) ((n0 >> 16) & 0xff), (char) ((n0 >> 24) & 0xff), + (char) (n1 & 0xff), (char) ((n1 >> 8) & 0xff), + (char) ((n1 >> 16) & 0xff), (char) ((n1 >> 24) & 0xff), + (id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK, + (id & RT3883_REVID_ECO_ID_MASK)); + + ramips_mem_base = RT3883_SDRAM_BASE; + ramips_mem_size_min = RT3883_MEM_SIZE_MIN; + ramips_mem_size_max = RT3883_MEM_SIZE_MAX; +} + +static struct ramips_gpio_chip rt3883_gpio_chips[] = { + { + .chip = { + .label = "RT3883-GPIO0", + .base = 0, + .ngpio = 24, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x00, + [RAMIPS_GPIO_REG_EDGE] = 0x04, + [RAMIPS_GPIO_REG_RENA] = 0x08, + [RAMIPS_GPIO_REG_FENA] = 0x0c, + [RAMIPS_GPIO_REG_DATA] = 0x20, + [RAMIPS_GPIO_REG_DIR] = 0x24, + [RAMIPS_GPIO_REG_POL] = 0x28, + [RAMIPS_GPIO_REG_SET] = 0x2c, + [RAMIPS_GPIO_REG_RESET] = 0x30, + [RAMIPS_GPIO_REG_TOGGLE] = 0x34, + }, + .map_base = RT3883_PIO_BASE, + .map_size = RT3883_PIO_SIZE, + }, + { + .chip = { + .label = "RT3883-GPIO1", + .base = 24, + .ngpio = 16, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x38, + [RAMIPS_GPIO_REG_EDGE] = 0x3c, + [RAMIPS_GPIO_REG_RENA] = 0x40, + [RAMIPS_GPIO_REG_FENA] = 0x44, + [RAMIPS_GPIO_REG_DATA] = 0x48, + [RAMIPS_GPIO_REG_DIR] = 0x4c, + [RAMIPS_GPIO_REG_POL] = 0x50, + [RAMIPS_GPIO_REG_SET] = 0x54, + [RAMIPS_GPIO_REG_RESET] = 0x58, + [RAMIPS_GPIO_REG_TOGGLE] = 0x5c, + }, + .map_base = RT3883_PIO_BASE, + .map_size = RT3883_PIO_SIZE, + }, + { + .chip = { + .label = "RT3883-GPIO2", + .base = 40, + .ngpio = 32, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x60, + [RAMIPS_GPIO_REG_EDGE] = 0x64, + [RAMIPS_GPIO_REG_RENA] = 0x68, + [RAMIPS_GPIO_REG_FENA] = 0x6c, + [RAMIPS_GPIO_REG_DATA] = 0x70, + [RAMIPS_GPIO_REG_DIR] = 0x74, + [RAMIPS_GPIO_REG_POL] = 0x78, + [RAMIPS_GPIO_REG_SET] = 0x7c, + [RAMIPS_GPIO_REG_RESET] = 0x80, + [RAMIPS_GPIO_REG_TOGGLE] = 0x84, + }, + .map_base = RT3883_PIO_BASE, + .map_size = RT3883_PIO_SIZE, + }, + { + .chip = { + .label = "RT3883-GPIO3", + .base = 72, + .ngpio = 24, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x88, + [RAMIPS_GPIO_REG_EDGE] = 0x8c, + [RAMIPS_GPIO_REG_RENA] = 0x90, + [RAMIPS_GPIO_REG_FENA] = 0x94, + [RAMIPS_GPIO_REG_DATA] = 0x98, + [RAMIPS_GPIO_REG_DIR] = 0x9c, + [RAMIPS_GPIO_REG_POL] = 0xa0, + [RAMIPS_GPIO_REG_SET] = 0xa4, + [RAMIPS_GPIO_REG_RESET] = 0xa8, + [RAMIPS_GPIO_REG_TOGGLE] = 0xac, + }, + .map_base = RT3883_PIO_BASE, + .map_size = RT3883_PIO_SIZE, + }, +}; + +static struct ramips_gpio_data rt3883_gpio_data = { + .chips = rt3883_gpio_chips, + .num_chips = ARRAY_SIZE(rt3883_gpio_chips), +}; + +static void rt3883_gpio_reserve(int first, int last) +{ + for (; first <= last; first++) + gpio_request(first, "reserved"); +} + +void __init rt3883_gpio_init(u32 mode) +{ + u32 t; + + rt3883_sysc_wr(mode, RT3883_SYSC_REG_GPIO_MODE); + + ramips_gpio_init(&rt3883_gpio_data); + if ((mode & RT3883_GPIO_MODE_I2C) == 0) + rt3883_gpio_reserve(RT3883_GPIO_I2C_SD, RT3883_GPIO_I2C_SCLK); + + if ((mode & RT3883_GPIO_MODE_SPI) == 0) + rt3883_gpio_reserve(RT3883_GPIO_SPI_CS0, RT3883_GPIO_SPI_MISO); + + t = mode >> RT3883_GPIO_MODE_UART0_SHIFT; + t &= RT3883_GPIO_MODE_UART0_MASK; + switch (t) { + case RT3883_GPIO_MODE_UARTF: + case RT3883_GPIO_MODE_PCM_UARTF: + case RT3883_GPIO_MODE_PCM_I2S: + case RT3883_GPIO_MODE_I2S_UARTF: + rt3883_gpio_reserve(RT3883_GPIO_7, RT3883_GPIO_14); + break; + case RT3883_GPIO_MODE_PCM_GPIO: + rt3883_gpio_reserve(RT3883_GPIO_11, RT3883_GPIO_14); + break; + case RT3883_GPIO_MODE_GPIO_UARTF: + case RT3883_GPIO_MODE_GPIO_I2S: + rt3883_gpio_reserve(RT3883_GPIO_7, RT3883_GPIO_10); + break; + } + + if ((mode & RT3883_GPIO_MODE_UART1) == 0) + rt3883_gpio_reserve(RT3883_GPIO_UART1_TXD, + RT3883_GPIO_UART1_RXD); + + if ((mode & RT3883_GPIO_MODE_JTAG) == 0) + rt3883_gpio_reserve(RT3883_GPIO_JTAG_TDO, + RT3883_GPIO_JTAG_TCLK); + + if ((mode & RT3883_GPIO_MODE_MDIO) == 0) + rt3883_gpio_reserve(RT3883_GPIO_MDIO_MDC, + RT3883_GPIO_MDIO_MDIO); + + if ((mode & RT3883_GPIO_MODE_GE1) == 0) + rt3883_gpio_reserve(RT3883_GPIO_GE1_TXD0, + RT3883_GPIO_GE1_RXCLK); + + if ((mode & RT3883_GPIO_MODE_GE2) == 0) + rt3883_gpio_reserve(RT3883_GPIO_GE2_TXD0, + RT3883_GPIO_GE2_RXCLK); + + t = mode >> RT3883_GPIO_MODE_PCI_SHIFT; + t &= RT3883_GPIO_MODE_PCI_MASK; + if (t != RT3883_GPIO_MODE_PCI_GPIO) + rt3883_gpio_reserve(RT3883_GPIO_PCI_AD0, + RT3883_GPIO_PCI_AD31); + + t = mode >> RT3883_GPIO_MODE_LNA_A_SHIFT; + t &= RT3883_GPIO_MODE_LNA_A_MASK; + if (t != RT3883_GPIO_MODE_LNA_A_GPIO) + rt3883_gpio_reserve(RT3883_GPIO_LNA_PE_A0, + RT3883_GPIO_LNA_PE_A2); + + t = mode >> RT3883_GPIO_MODE_LNA_G_SHIFT; + t &= RT3883_GPIO_MODE_LNA_G_MASK; + if (t != RT3883_GPIO_MODE_LNA_G_GPIO) + rt3883_gpio_reserve(RT3883_GPIO_LNA_PE_G0, + RT3883_GPIO_LNA_PE_G2); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/setup.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/setup.c new file mode 100644 index 0000000..6e037a7 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/setup.c @@ -0,0 +1,88 @@ +/* + * Ralink RT3662/RT3883 SoC specific setup + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mips_machine.h> +#include <asm/reboot.h> +#include <asm/time.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include "common.h" + +static void rt3883_restart(char *command) +{ + rt3883_sysc_wr(RT3883_RSTCTRL_SYS, RT3883_SYSC_REG_RSTCTRL); + while (1) + if (cpu_wait) + cpu_wait(); +} + +static void rt3883_halt(void) +{ + while (1) + if (cpu_wait) + cpu_wait(); +} + +unsigned int __cpuinit get_c0_compare_irq(void) +{ + return CP0_LEGACY_COMPARE_IRQ; +} + +void __init ramips_soc_setup(void) +{ + struct clk *clk; + + rt3883_sysc_base = ioremap_nocache(RT3883_SYSC_BASE, PAGE_SIZE); + rt3883_memc_base = ioremap_nocache(RT3883_MEMC_BASE, PAGE_SIZE); + + rt3883_clocks_init(); + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type, + clk_get_rate(clk) / 1000000, + (clk_get_rate(clk) % 1000000) * 100 / 1000000); + + _machine_restart = rt3883_restart; + _machine_halt = rt3883_halt; + pm_power_off = rt3883_halt; + + clk = clk_get(NULL, "uart"); + if (IS_ERR(clk)) + panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); + + ramips_early_serial_setup(0, RT3883_UART0_BASE, clk_get_rate(clk), + RT3883_INTC_IRQ_UART0); + ramips_early_serial_setup(1, RT3883_UART1_BASE, clk_get_rate(clk), + RT3883_INTC_IRQ_UART1); +} + +void __init plat_time_init(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + mips_hpt_frequency = clk_get_rate(clk) / 2; +} |