diff options
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.24/1320--ARM-S3C24xx-Add-preliminary-E-TEN-glofiish-M800-s.patch')
| -rw-r--r-- | target/linux/s3c24xx/patches-2.6.24/1320--ARM-S3C24xx-Add-preliminary-E-TEN-glofiish-M800-s.patch | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.24/1320--ARM-S3C24xx-Add-preliminary-E-TEN-glofiish-M800-s.patch b/target/linux/s3c24xx/patches-2.6.24/1320--ARM-S3C24xx-Add-preliminary-E-TEN-glofiish-M800-s.patch new file mode 100644 index 0000000..44ef8fb --- /dev/null +++ b/target/linux/s3c24xx/patches-2.6.24/1320--ARM-S3C24xx-Add-preliminary-E-TEN-glofiish-M800-s.patch @@ -0,0 +1,165 @@ +From eee43706c5969f5d99096dddefae3be0c41a6ed2 Mon Sep 17 00:00:00 2001 +From: Harald Welte <laforge@gnumonks.org> +Date: Thu, 13 Nov 2008 08:29:11 +0000 +Subject: [PATCH] [ARM] S3C24xx: Add preliminary E-TEN glofiish M800 support + +This patch adds preliminary support for the M800. If booted +through haret, the system has the following working components: +* NAND read support +* framebuffer / LCM (no jbt6k74 power management yet) +* USB device controller (incl. Pullup) +* microSD card (incl. card-detect) +* backlight brightness control (using gta01-bl.c) +* input event device for power, camera and record button +* input event device for keyboard slide event +* bluetooth power control (using gta01-pm-bt) + +Many things are still missing, like +* NAND write support +* GPS power control +* GSM/3G modem interface +* capsense buttons, joystick and querty-keyboard +* camera +* audio + +Signed-off-by: Harald Welte <laforge@gnumonks.org> +--- + arch/arm/mach-s3c2440/Kconfig | 7 +++++++ + arch/arm/mach-s3c2440/Makefile | 1 + + arch/arm/plat-s3c24xx/neo1973_pm_bt.c | 17 +++++++++++++++++ + arch/arm/tools/mach-types | 1 + + drivers/input/keyboard/Kconfig | 11 +++++++++++ + drivers/input/keyboard/Makefile | 1 + + drivers/mtd/nand/nand_bbt.c | 2 ++ + 7 files changed, 40 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig +index 4a211d8..4c3b6b2 100644 +--- a/arch/arm/mach-s3c2440/Kconfig ++++ b/arch/arm/mach-s3c2440/Kconfig +@@ -98,6 +98,13 @@ config NEO1973_GTA02_2440 + Say Y here if you are using an early hardware revision + of the FIC/Openmoko Neo1973 GTA02 GSM Phone. + ++config MACH_M800 ++ bool "E-TEN glofiish M800/X800" ++ select CPU_S3C2442 ++ help ++ Say Y here if you are using the E-TEN glofiish M800/X800. ++ ++ + endmenu + + #source "arch/arm/mach-s3c2440/camera/Kconfig" +diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile +index e3ca9e3..8617820 100644 +--- a/arch/arm/mach-s3c2440/Makefile ++++ b/arch/arm/mach-s3c2440/Makefile +@@ -24,3 +24,4 @@ obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o + obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o + obj-$(CONFIG_MACH_HXD8) += mach-hxd8.o + obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o ++obj-$(CONFIG_MACH_M800) += mach-glofiish.o +diff --git a/arch/arm/plat-s3c24xx/neo1973_pm_bt.c b/arch/arm/plat-s3c24xx/neo1973_pm_bt.c +index dfc9ae8..dcb251b 100644 +--- a/arch/arm/plat-s3c24xx/neo1973_pm_bt.c ++++ b/arch/arm/plat-s3c24xx/neo1973_pm_bt.c +@@ -30,6 +30,9 @@ + #include <linux/pcf50633.h> + #endif + ++#ifdef CONFIG_MACH_M800 ++#include <asm/arch/glofiish.h> ++#endif + + #define DRVMSG "FIC Neo1973 Bluetooth Power Management" + +@@ -56,6 +59,14 @@ static ssize_t bt_read(struct device *dev, struct device_attribute *attr, + break; + #endif /* CONFIG_MACH_NEO1973_GTA02 */ + ++#ifdef CONFIG_MACH_M800 ++ case MACH_TYPE_M800: ++ if (s3c2410_gpio_getpin(M800_GPIO_BT_POWER_1) && ++ s3c2410_gpio_getpin(M800_GPIO_BT_POWER_2)) ++ goto out_1; ++ break; ++#endif /* CONFIG_MACH_M800 */ ++ + } + } else if (!strcmp(attr->attr.name, "reset")) { + switch (machine_arch_type) { +@@ -121,6 +132,12 @@ static ssize_t bt_write(struct device *dev, struct device_attribute *attr, + break; + #endif /* CONFIG_MACH_NEO1973_GTA02 */ + ++#ifdef CONFIG_MACH_M800 ++ case MACH_TYPE_M800: ++ s3c2410_gpio_setpin(M800_GPIO_BT_POWER_1, on); ++ s3c2410_gpio_setpin(M800_GPIO_BT_POWER_2, on); ++ break; ++#endif /* CONFIG_MACH_M800 */ + } + } else if (!strcmp(attr->attr.name, "reset")) { + /* reset is low-active, so we need to invert */ +diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types +index 0a9a5e7..2578091 100644 +--- a/arch/arm/tools/mach-types ++++ b/arch/arm/tools/mach-types +@@ -1367,3 +1367,4 @@ db88f5281 MACH_DB88F5281 DB88F5281 1358 + csb726 MACH_CSB726 CSB726 1359 + tik27 MACH_TIK27 TIK27 1360 + mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361 ++m800 MACH_M800 M800 1772 +diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig +index a61ca45..68a893f 100644 +--- a/drivers/input/keyboard/Kconfig ++++ b/drivers/input/keyboard/Kconfig +@@ -304,6 +304,17 @@ config KEYBOARD_NEO1973 + To compile this driver as a module, choose M here: the + module will be called neo1973kbd. + ++config KEYBOARD_M800 ++ tristate "E-TEN glofiish M800 buttons" ++ depends on MACH_M800 ++ default y ++ help ++ Say Y here to enable the buttons on the E-TEN glofiish ++ M800 GSM phone. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called m800kbd. ++ + config KEYBOARD_QT2410 + tristate "QT2410 buttons" + depends on MACH_QT2410 +diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile +index 34bfc33..005a050 100644 +--- a/drivers/input/keyboard/Makefile ++++ b/drivers/input/keyboard/Makefile +@@ -15,6 +15,7 @@ obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o + obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o + obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o + obj-$(CONFIG_KEYBOARD_NEO1973) += neo1973kbd.o ++obj-$(CONFIG_KEYBOARD_M800) += m800kbd.o + obj-$(CONFIG_KEYBOARD_QT2410) += qt2410kbd.o + obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o + obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o +diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c +index 5e121ce..7e20816 100644 +--- a/drivers/mtd/nand/nand_bbt.c ++++ b/drivers/mtd/nand/nand_bbt.c +@@ -430,8 +430,10 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, + + if (ret) { + this->bbt[i >> 3] |= 0x03 << (i & 0x6); ++#if 0 + printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n", + i >> 1, (unsigned int)from); ++#endif + mtd->ecc_stats.badblocks++; + } + +-- +1.5.6.5 + |