summaryrefslogtreecommitdiff
path: root/target/linux/s3c24xx/patches-2.6.30/001-merge-openmoko.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.30/001-merge-openmoko.patch')
-rw-r--r--target/linux/s3c24xx/patches-2.6.30/001-merge-openmoko.patch2265
1 files changed, 2265 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.30/001-merge-openmoko.patch b/target/linux/s3c24xx/patches-2.6.30/001-merge-openmoko.patch
new file mode 100644
index 0000000..0738a38
--- /dev/null
+++ b/target/linux/s3c24xx/patches-2.6.30/001-merge-openmoko.patch
@@ -0,0 +1,2265 @@
+Merge OpenMoko kernel patches
+git://git.openmoko.org/git/kernel.git#(no
+
+lars@lars-laptop Thu May 14 18:33:23 UTC 2009
+
+---
+
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/mci.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/mci.h 2009-05-18 19:07:48.000000000 +0200
+@@ -0,0 +1,13 @@
++#ifndef _ARCH_MCI_H
++#define _ARCH_MCI_H
++
++struct s3c24xx_mci_pdata {
++ unsigned int gpio_detect;
++ unsigned int gpio_wprotect;
++ unsigned long ocr_avail;
++ unsigned int do_dma;
++ void (*set_power)(unsigned char power_mode,
++ unsigned short vdd);
++};
++
++#endif /* _ARCH_NCI_H */
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2410/include/mach/regs-sdi.h 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2410/include/mach/regs-sdi.h 2009-05-18 19:07:48.000000000 +0200
+@@ -30,6 +30,7 @@
+ #define S3C2410_SDIFSTA (0x38)
+
+ #define S3C2410_SDIDATA (0x3C)
++#define S3C2410_SDIDATA_BYTE (0x3C)
+ #define S3C2410_SDIIMSK (0x40)
+
+ #define S3C2440_SDIDATA (0x40)
+@@ -37,6 +38,8 @@
+
+ #define S3C2440_SDICON_SDRESET (1<<8)
+ #define S3C2440_SDICON_MMCCLOCK (1<<5)
++#define S3C2440_SDIDATA_BYTE (0x48)
++
+ #define S3C2410_SDICON_BYTEORDER (1<<4)
+ #define S3C2410_SDICON_SDIOIRQ (1<<3)
+ #define S3C2410_SDICON_RWAITEN (1<<2)
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2440/s3c2440.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2440/s3c2440.c 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2440/s3c2440.c 2009-05-18 19:07:48.000000000 +0200
+@@ -46,6 +46,9 @@
+ s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
+ s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT;
+
++ /* make sure SD/MMC driver can distinguish 2440 from 2410 */
++ s3c_device_sdi.name = "s3c2440-sdi";
++
+ /* register our system device for everything else */
+
+ return sysdev_register(&s3c2440_sysdev);
+Index: linux-2.6.30-rc6/arch/arm/mach-s3c2442/s3c2442.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/mach-s3c2442/s3c2442.c 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/mach-s3c2442/s3c2442.c 2009-05-18 19:07:48.000000000 +0200
+@@ -21,6 +21,7 @@
+
+ #include <plat/s3c2442.h>
+ #include <plat/cpu.h>
++#include <plat/devs.h>
+
+ static struct sys_device s3c2442_sysdev = {
+ .cls = &s3c2442_sysclass,
+@@ -30,5 +31,8 @@
+ {
+ printk("S3C2442: Initialising architecture\n");
+
++ /* make sure SD/MMC driver can distinguish 2440 from 2410 */
++ s3c_device_sdi.name = "s3c2440-sdi";
++
+ return sysdev_register(&s3c2442_sysdev);
+ }
+Index: linux-2.6.30-rc6/arch/arm/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/Makefile 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/Makefile 2009-05-18 19:07:48.000000000 +0200
+@@ -55,7 +55,8 @@
+ arch-$(CONFIG_CPU_32v6K) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+ endif
+ arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+-arch-$(CONFIG_CPU_32v4T) :=-D__LINUX_ARM_ARCH__=4 -march=armv4t
++# We can't load armv4t modules, but still need to assemble some armv4t code to be linked in.
++arch-$(CONFIG_CPU_32v4T) :=-D__LINUX_ARM_ARCH__=4 -march=armv4 -Wa,-march=armv4t
+ arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4
+ arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3
+
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/mach/cpu.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/mach/cpu.h 2009-05-18 19:07:48.000000000 +0200
+@@ -0,0 +1,165 @@
++/*
++ * arch/arm/plat-s3c/include/mach/cpu.h
++ *
++ * S3C cpu type detection
++ *
++ * Copyright (C) 2008 Samsung Electronics
++ * Kyungmin Park <kyungmin.park@samsung.com>
++ *
++ * Derived from OMAP cpu.h
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef __ASM_ARCH_S3C_CPU_H
++#define __ASM_ARCH_S3C_CPU_H
++
++extern unsigned int system_rev;
++
++#define S3C_SYSTEM_REV_ATAG (system_rev & 0xffff)
++#define S3C_SYSTEM_REV_CPU (system_rev & 0xffff0000)
++
++/*
++ * cpu_is_s3c24xx(): True for s3c2400, s3c2410, s3c2440 and so on
++ * cpu_is_s3c241x(): True fro s3c2410, s3c2412
++ * cpu_is_s3c244x(): True fro s3c2440, s3c2442, s3c2443
++ * cpu_is_s3c64xx(): True for s3c6400, s3c6410
++ */
++#define GET_S3C_CLASS ((system_rev >> 24) & 0xff)
++
++#define IS_S3C_CLASS(class, id) \
++static inline int is_s3c ##class (void) \
++{ \
++ return (GET_S3C_CLASS == (id)) ? 1 : 0; \
++}
++
++#define GET_S3C_SUBCLASS ((system_rev >> 20) & 0xfff)
++
++#define IS_S3C_SUBCLASS(subclass, id) \
++static inline int is_s3c ##subclass (void) \
++{ \
++ return (GET_S3C_SUBCLASS == (id)) ? 1 : 0; \
++}
++
++IS_S3C_CLASS(24xx, 0x24)
++IS_S3C_CLASS(64xx, 0x64)
++
++IS_S3C_SUBCLASS(241x, 0x241)
++IS_S3C_SUBCLASS(244x, 0x244)
++
++#define cpu_is_s3c24xx() 0
++#define cpu_is_s3c241x() 0
++#define cpu_is_s3c244x() 0
++#define cpu_is_s3c64xx() 0
++
++#if defined(CONFIG_ARCH_S3C2410)
++# undef cpu_is_s3c24xx
++# undef cpu_is_s3c241x
++# undef cpu_is_s3c244x
++# define cpu_is_s3c24xx() is_s3c24xx()
++# define cpu_is_s3c241x() is_s3c241x()
++# define cpu_is_s3c244x() is_s3c244x()
++#endif
++
++#if defined(CONFIG_ARCH_S3C64XX)
++# undef cpu_is_s3c64xx
++# define cpu_is_s3c64xx() is_s3c64xx()
++#endif
++
++/*
++ * Macros to detect individual cpu types.
++ * cpu_is_s3c2410(): True for s3c2410
++ * cpu_is_s3c2440(): True for s3c2440
++ * cpu_is_s3c6400(): True for s3c6400
++ * cpu_is_s3c6410(): True for s3c6410
++ *
++ * Exception:
++ * Store Revision A to 1
++ * s3c2410a -> s3c2411
++ * s3c2440a -> s3c2441
++ */
++
++#define GET_S3C_TYPE ((system_rev >> 16) & 0xffff)
++
++#define IS_S3C_TYPE(type, id) \
++static inline int is_s3c ##type (void) \
++{ \
++ return (GET_S3C_TYPE == (id)) ? 1 : 0; \
++}
++
++IS_S3C_TYPE(2400, 0x2400)
++IS_S3C_TYPE(2410, 0x2410)
++IS_S3C_TYPE(2410a, 0x2411)
++IS_S3C_TYPE(2412, 0x2412)
++IS_S3C_TYPE(2440, 0x2440)
++IS_S3C_TYPE(2440a, 0x2441)
++IS_S3C_TYPE(2442, 0x2442)
++IS_S3C_TYPE(2443, 0x2443)
++IS_S3C_TYPE(6400, 0x6400)
++IS_S3C_TYPE(6410, 0x6410)
++
++#define cpu_is_s3c2400() 0
++#define cpu_is_s3c2410() 0
++#define cpu_is_s3c2410a() 0
++#define cpu_is_s3c2412() 0
++#define cpu_is_s3c2440() 0
++#define cpu_is_s3c2440a() 0
++#define cpu_is_s3c2442() 0
++#define cpu_is_s3c2443() 0
++#define cpu_is_s3c6400() 0
++#define cpu_is_s3c6410() 0
++
++#if defined(CONFIG_ARCH_S3C2410)
++# undef cpu_is_s3c2400
++# define cpu_is_s3c2400() is_s3c2400()
++#endif
++
++#if defined(CONFIG_CPU_S3C2410)
++# undef cpu_is_s3c2410
++# undef cpu_is_s3c2410a
++# define cpu_is_s3c2410() is_s3c2410()
++# define cpu_is_s3c2410a() is_s3c2410a()
++#endif
++
++#if defined(CONFIG_CPU_S3C2412)
++# undef cpu_is_s3c2412
++# define cpu_is_s3c2412() is_s3c2412()
++#endif
++
++#if defined(CONFIG_CPU_S3C2440)
++# undef cpu_is_s3c2440
++# undef cpu_is_s3c2440a
++# define cpu_is_s3c2440() is_s3c2440()
++# define cpu_is_s3c2440a() is_s3c2440a()
++#endif
++
++#if defined(CONFIG_CPU_S3C2442)
++# undef cpu_is_s3c2442
++# define cpu_is_s3c2442() is_s3c2442()
++#endif
++
++#if defined(CONFIG_CPU_S3C2443)
++# undef cpu_is_s3c2443
++# define cpu_is_s3c2443() is_s3c2443()
++#endif
++
++#if defined(CONFIG_ARCH_S3C64XX)
++# undef cpu_is_s3c6400
++# undef cpu_is_s3c6410
++# define cpu_is_s3c6400() is_s3c6400()
++# define cpu_is_s3c6410() is_s3c6410()
++#endif
++
++#endif
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/devs.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/include/plat/devs.h 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/devs.h 2009-05-18 19:07:48.000000000 +0200
+@@ -16,6 +16,10 @@
+ unsigned long nr_resources;
+ };
+
++struct s3c_plat_otg_data {
++ int phyclk;
++};
++
+ extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+ extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
+
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/gpio-core.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/include/plat/gpio-core.h 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/gpio-core.h 2009-05-18 19:07:48.000000000 +0200
+@@ -20,6 +20,19 @@
+ * specific code.
+ */
+
++struct s3c_gpio_chip;
++
++/**
++ * struct s3c_gpio_pm - power management (suspend/resume) information
++ * @save: Routine to save the state of the GPIO block
++ * @resume: Routine to resume the GPIO block.
++ */
++struct s3c_gpio_pm {
++ void (*save)(struct s3c_gpio_chip *chip);
++ void (*resume)(struct s3c_gpio_chip *chip);
++};
++
++
+ struct s3c_gpio_cfg;
+
+ /**
+@@ -27,6 +40,7 @@
+ * @chip: The chip structure to be exported via gpiolib.
+ * @base: The base pointer to the gpio configuration registers.
+ * @config: special function and pull-resistor control information.
++ * @pm_save: Save information for suspend/resume support.
+ *
+ * This wrapper provides the necessary information for the Samsung
+ * specific gpios being registered with gpiolib.
+@@ -34,7 +48,11 @@
+ struct s3c_gpio_chip {
+ struct gpio_chip chip;
+ struct s3c_gpio_cfg *config;
++ struct s3c_gpio_pm *pm;
+ void __iomem *base;
++#ifdef CONFIG_PM
++ u32 pm_save[4];
++#endif
+ };
+
+ static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
+@@ -75,3 +93,16 @@
+
+ static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
+ #endif
++
++#ifdef CONFIG_PM
++extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
++extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
++extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
++#define __gpio_pm(x) x
++#else
++#define s3c_gpio_pm_1bit NULL
++#define s3c_gpio_pm_2bit NULL
++#define s3c_gpio_pm_4bit NULL
++#define __gpio_pm(x) NULL
++
++#endif /* CONFIG_PM */
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/map-base.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/include/plat/map-base.h 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/map-base.h 2009-05-18 19:07:48.000000000 +0200
+@@ -36,5 +36,7 @@
+ #define S3C_VA_TIMER S3C_ADDR(0x00300000) /* timer block */
+ #define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */
+ #define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */
++#define S3C_VA_OTG S3C_ADDR(0x03900000) /* OTG */
++#define S3C_VA_OTGSFR S3C_ADDR(0x03a00000) /* OTGSFR */
+
+ #endif /* __ASM_PLAT_MAP_H */
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/nand.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/include/plat/nand.h 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/nand.h 2009-05-18 19:07:48.000000000 +0200
+@@ -21,11 +21,14 @@
+ * partitions = mtd partition list
+ */
+
++#define S3C2410_NAND_BBT 0x0001
++
+ struct s3c2410_nand_set {
+ unsigned int disable_ecc : 1;
+
+ int nr_chips;
+ int nr_partitions;
++ unsigned int flags;
+ char *name;
+ int *nr_map;
+ struct mtd_partition *partitions;
+@@ -44,6 +47,9 @@
+ int nr_sets;
+ struct s3c2410_nand_set *sets;
+
++ /* force software_ecc at runtime */
++ int software_ecc;
++
+ void (*select_chip)(struct s3c2410_nand_set *,
+ int chip);
+ };
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/pm.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/include/plat/pm.h 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/pm.h 2009-05-18 19:07:48.000000000 +0200
+@@ -9,6 +9,8 @@
+ * published by the Free Software Foundation.
+ */
+
++#include <linux/sysdev.h>
++
+ /* s3c_pm_init
+ *
+ * called from board at initialisation time to setup the power
+@@ -44,6 +46,8 @@
+
+ extern unsigned long s3c_pm_flags;
+
++extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */
++
+ /* from sleep.S */
+
+ extern int s3c_cpu_save(unsigned long *saveblk);
+@@ -88,6 +92,7 @@
+ u32 ufcon;
+ u32 umcon;
+ u32 ubrdiv;
++ u32 udivslot;
+ };
+
+ /* helper functions to save/restore lists of registers. */
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/sdhci.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/include/plat/sdhci.h 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/include/plat/sdhci.h 2009-05-18 19:07:48.000000000 +0200
+@@ -29,6 +29,7 @@
+ * is necessary the controllers and/or GPIO blocks require the
+ * changing of driver-strength and other controls dependant on
+ * the card and speed of operation.
++ * sdhci_host: Pointer kept during init, allows presence change notification
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio or
+@@ -45,8 +46,11 @@
+ void __iomem *regbase,
+ struct mmc_ios *ios,
+ struct mmc_card *card);
++ struct sdhci_host * sdhci_host;
+ };
+
++extern void sdhci_s3c_force_presence_change(struct platform_device *pdev);
++
+ /**
+ * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
+ * @pd: Platform data to register to device.
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/init.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/init.c 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/init.c 2009-05-18 19:07:48.000000000 +0200
+@@ -31,6 +31,34 @@
+
+ static struct cpu_table *cpu;
+
++static void __init set_system_rev(unsigned int idcode)
++{
++ /*
++ * system_rev encoding is as follows
++ * system_rev & 0xff000000 -> S3C Class (24xx/64xx)
++ * system_rev & 0xfff00000 -> S3C Sub Class (241x/244x)
++ * system_rev & 0xffff0000 -> S3C Type (2410/2440/6400/6410)
++ *
++ * Remaining[15:0] are preserved from the value set by ATAG
++ *
++ * Exception:
++ * Store Revision A to 1 such as
++ * s3c2410A to s3c2411
++ * s3c2440A to s3c2441
++ */
++
++ system_rev &= 0xffff;
++ system_rev |= (idcode & 0x0ffff000) << 4;
++
++ if (idcode == 0x32410002 || idcode == 0x32440001)
++ system_rev |= (0x1 << 16);
++ if (idcode == 0x32440aaa /* s3c2442 */
++ || idcode == 0x32440aab) /* s3c2442b */
++ system_rev |= (0x2 << 16);
++ if (idcode == 0x0) /* s3c2400 */
++ system_rev |= (0x2400 << 16);
++}
++
+ static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
+ struct cpu_table *tab,
+ unsigned int count)
+@@ -53,6 +81,8 @@
+ panic("Unknown S3C24XX CPU");
+ }
+
++ set_system_rev(idcode);
++
+ printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
+
+ if (cpu->map_io == NULL || cpu->init == NULL) {
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/Makefile 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/Makefile 2009-05-18 19:07:48.000000000 +0200
+@@ -21,6 +21,7 @@
+ # PM support
+
+ obj-$(CONFIG_PM) += pm.o
++obj-$(CONFIG_PM) += pm-gpio.o
+ obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o
+
+ # devices
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/pm.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c/pm.c 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/pm.c 2009-05-18 19:07:48.000000000 +0200
+@@ -21,11 +21,10 @@
+
+ #include <asm/cacheflush.h>
+ #include <mach/hardware.h>
++#include <mach/map.h>
+
+ #include <plat/regs-serial.h>
+ #include <mach/regs-clock.h>
+-#include <mach/regs-gpio.h>
+-#include <mach/regs-mem.h>
+ #include <mach/regs-irq.h>
+ #include <asm/irq.h>
+
+@@ -70,6 +69,8 @@
+
+ /* Save the UART configurations if we are configured for debug. */
+
++unsigned char pm_uart_udivslot;
++
+ #ifdef CONFIG_S3C2410_PM_DEBUG
+
+ struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+@@ -83,6 +84,12 @@
+ save->ufcon = __raw_readl(regs + S3C2410_UFCON);
+ save->umcon = __raw_readl(regs + S3C2410_UMCON);
+ save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
++
++ if (pm_uart_udivslot)
++ save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
++
++ S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
++ uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
+ }
+
+ static void s3c_pm_save_uarts(void)
+@@ -98,11 +105,16 @@
+ {
+ void __iomem *regs = S3C_VA_UARTx(uart);
+
++ s3c_pm_arch_update_uart(regs, save);
++
+ __raw_writel(save->ulcon, regs + S3C2410_ULCON);
+ __raw_writel(save->ucon, regs + S3C2410_UCON);
+ __raw_writel(save->ufcon, regs + S3C2410_UFCON);
+ __raw_writel(save->umcon, regs + S3C2410_UMCON);
+ __raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
++
++ if (pm_uart_udivslot)
++ __raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
+ }
+
+ static void s3c_pm_restore_uarts(void)
+@@ -289,11 +301,14 @@
+
+ s3c_pm_arch_stop_clocks();
+
+- /* s3c_cpu_save will also act as our return point from when
+- * we resume as it saves its own register state and restores it
+- * during the resume. */
+-
+- s3c_cpu_save(regs_save);
++ /* s3c2410_cpu_save will also act as our return point from when
++ * we resume as it saves its own register state, so use the return
++ * code to differentiate return from save and return from sleep */
++
++ if (s3c_cpu_save(regs_save) == 0) {
++ flush_cache_all();
++ pm_cpu_sleep();
++ }
+
+ /* restore the cpu state using the kernel's cpu init code. */
+
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c/pm-gpio.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/arch/arm/plat-s3c/pm-gpio.c 2009-05-18 19:07:48.000000000 +0200
+@@ -0,0 +1,378 @@
++/* linux/arch/arm/plat-s3c/pm-gpio.c
++ *
++ * Copyright 2008 Openmoko, Inc.
++ * Copyright 2008 Simtec Electronics
++ * Ben Dooks <ben@simtec.co.uk>
++ * http://armlinux.simtec.co.uk/
++ *
++ * S3C series GPIO PM code
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++
++#include <mach/gpio-core.h>
++#include <plat/pm.h>
++
++/* PM GPIO helpers */
++
++#define OFFS_CON (0x00)
++#define OFFS_DAT (0X04)
++#define OFFS_UP (0X08)
++
++static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
++{
++ chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
++ chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
++}
++
++static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
++{
++ void __iomem *base = chip->base;
++ u32 old_gpcon = __raw_readl(base + OFFS_CON);
++ u32 old_gpdat = __raw_readl(base + OFFS_DAT);
++ u32 gps_gpcon = chip->pm_save[0];
++ u32 gps_gpdat = chip->pm_save[1];
++ u32 gpcon;
++
++ /* GPACON only has one bit per control / data and no PULLUPs.
++ * GPACON[x] = 0 => Output, 1 => SFN */
++
++ /* first set all SFN bits to SFN */
++
++ gpcon = old_gpcon | gps_gpcon;
++ __raw_writel(gpcon, base + OFFS_CON);
++
++ /* now set all the other bits */
++
++ __raw_writel(gps_gpdat, base + OFFS_DAT);
++ __raw_writel(gps_gpcon, base + OFFS_CON);
++
++ S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
++ chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
++}
++
++struct s3c_gpio_pm s3c_gpio_pm_1bit = {
++ .save = s3c_gpio_pm_1bit_save,
++ .resume = s3c_gpio_pm_1bit_resume,
++};
++
++static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
++{
++ chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
++ chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
++ chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
++}
++
++/* Test whether the given masked+shifted bits of an GPIO configuration
++ * are one of the SFN (special function) modes. */
++
++static inline int is_sfn(unsigned long con)
++{
++ return con >= 2;
++}
++
++/* Test if the given masked+shifted GPIO configuration is an input */
++
++static inline int is_in(unsigned long con)
++{
++ return con == 0;
++}
++
++/* Test if the given masked+shifted GPIO configuration is an output */
++
++static inline int is_out(unsigned long con)
++{
++ return con == 1;
++}
++
++/**
++ * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
++ * @chip: The chip information to resume.
++ *
++ * Restore one of the GPIO banks that was saved during suspend. This is
++ * not as simple as once thought, due to the possibility of glitches
++ * from the order that the CON and DAT registers are set in.
++ *
++ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
++ * combinations of changes to check. Three of these, if the pin stays
++ * in the same configuration can be discounted. This leaves us with
++ * the following:
++ *
++ * { IN => OUT } Change DAT first
++ * { IN => SFN } Change CON first
++ * { OUT => SFN } Change CON first, so new data will not glitch
++ * { OUT => IN } Change CON first, so new data will not glitch
++ * { SFN => IN } Change CON first
++ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
++ *
++ * We do not currently deal with the UP registers as these control
++ * weak resistors, so a small delay in change should not need to bring
++ * these into the calculations.
++ *
++ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
++ * state for when it is next output.
++ */
++static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
++{
++ void __iomem *base = chip->base;
++ u32 old_gpcon = __raw_readl(base + OFFS_CON);
++ u32 old_gpdat = __raw_readl(base + OFFS_DAT);
++ u32 gps_gpcon = chip->pm_save[0];
++ u32 gps_gpdat = chip->pm_save[1];
++ u32 gpcon, old, new, mask;
++ u32 change_mask = 0x0;
++ int nr;
++
++ /* restore GPIO pull-up settings */
++ __raw_writel(chip->pm_save[2], base + OFFS_UP);
++
++ /* Create a change_mask of all the items that need to have
++ * their CON value changed before their DAT value, so that
++ * we minimise the work between the two settings.
++ */
++
++ for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
++ old = (old_gpcon & mask) >> nr;
++ new = (gps_gpcon & mask) >> nr;
++
++ /* If there is no change, then skip */
++
++ if (old == new)
++ continue;
++
++ /* If both are special function, then skip */
++
++ if (is_sfn(old) && is_sfn(new))
++ continue;
++
++ /* Change is IN => OUT, do not change now */
++
++ if (is_in(old) && is_out(new))
++ continue;
++
++ /* Change is SFN => OUT, do not change now */
++
++ if (is_sfn(old) && is_out(new))
++ continue;
++
++ /* We should now be at the case of IN=>SFN,
++ * OUT=>SFN, OUT=>IN, SFN=>IN. */
++
++ change_mask |= mask;
++ }
++
++
++ /* Write the new CON settings */
++
++ gpcon = old_gpcon & ~change_mask;
++ gpcon |= gps_gpcon & change_mask;
++
++ __raw_writel(gpcon, base + OFFS_CON);
++
++ /* Now change any items that require DAT,CON */
++
++ __raw_writel(gps_gpdat, base + OFFS_DAT);
++ __raw_writel(gps_gpcon, base + OFFS_CON);
++
++ S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
++ chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
++}
++
++struct s3c_gpio_pm s3c_gpio_pm_2bit = {
++ .save = s3c_gpio_pm_2bit_save,
++ .resume = s3c_gpio_pm_2bit_resume,
++};
++
++#ifdef CONFIG_ARCH_S3C64XX
++static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
++{
++ chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
++ chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
++ chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
++
++ if (chip->chip.ngpio > 8)
++ chip->pm_save[0] = __raw_readl(chip->base - 4);
++}
++
++static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
++{
++ u32 old, new, mask;
++ u32 change_mask = 0x0;
++ int nr;
++
++ for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
++ old = (old_gpcon & mask) >> nr;
++ new = (gps_gpcon & mask) >> nr;
++
++ /* If there is no change, then skip */
++
++ if (old == new)
++ continue;
++
++ /* If both are special function, then skip */
++
++ if (is_sfn(old) && is_sfn(new))
++ continue;
++
++ /* Change is IN => OUT, do not change now */
++
++ if (is_in(old) && is_out(new))
++ continue;
++
++ /* Change is SFN => OUT, do not change now */
++
++ if (is_sfn(old) && is_out(new))
++ continue;
++
++ /* We should now be at the case of IN=>SFN,
++ * OUT=>SFN, OUT=>IN, SFN=>IN. */
++
++ change_mask |= mask;
++ }
++
++ return change_mask;
++}
++
++static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
++{
++ void __iomem *con = chip->base + (index * 4);
++ u32 old_gpcon = __raw_readl(con);
++ u32 gps_gpcon = chip->pm_save[index + 1];
++ u32 gpcon, mask;
++
++ mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
++
++ gpcon = old_gpcon & ~mask;
++ gpcon |= gps_gpcon & mask;
++
++ __raw_writel(gpcon, con);
++}
++
++static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
++{
++ void __iomem *base = chip->base;
++ u32 old_gpcon[2];
++ u32 old_gpdat = __raw_readl(base + OFFS_DAT);
++ u32 gps_gpdat = chip->pm_save[2];
++
++ /* First, modify the CON settings */
++
++ old_gpcon[0] = 0;
++ old_gpcon[1] = __raw_readl(base + OFFS_CON);
++
++ s3c_gpio_pm_4bit_con(chip, 0);
++ if (chip->chip.ngpio > 8) {
++ old_gpcon[0] = __raw_readl(base - 4);
++ s3c_gpio_pm_4bit_con(chip, -1);
++ }
++
++ /* Now change the configurations that require DAT,CON */
++
++ __raw_writel(chip->pm_save[2], base + OFFS_DAT);
++ __raw_writel(chip->pm_save[1], base + OFFS_CON);
++ if (chip->chip.ngpio > 8)
++ __raw_writel(chip->pm_save[0], base - 4);
++
++ __raw_writel(chip->pm_save[2], base + OFFS_DAT);
++ __raw_writel(chip->pm_save[3], base + OFFS_UP);
++
++ if (chip->chip.ngpio > 8) {
++ S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
++ chip->chip.label, old_gpcon[0], old_gpcon[1],
++ __raw_readl(base - 4),
++ __raw_readl(base + OFFS_CON),
++ old_gpdat, gps_gpdat);
++ } else
++ S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
++ chip->chip.label, old_gpcon[1],
++ __raw_readl(base + OFFS_CON),
++ old_gpdat, gps_gpdat);
++}
++
++struct s3c_gpio_pm s3c_gpio_pm_4bit = {
++ .save = s3c_gpio_pm_4bit_save,
++ .resume = s3c_gpio_pm_4bit_resume,
++};
++#endif /* CONFIG_ARCH_S3C64XX */
++
++/**
++ * s3c_pm_save_gpio() - save gpio chip data for suspend
++ * @ourchip: The chip for suspend.
++ */
++static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
++{
++ struct s3c_gpio_pm *pm = ourchip->pm;
++
++ if (pm == NULL || pm->save == NULL)
++ S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
++ else
++ pm->save(ourchip);
++}
++
++/**
++ * s3c_pm_save_gpios() - Save the state of the GPIO banks.
++ *
++ * For all the GPIO banks, save the state of each one ready for going
++ * into a suspend mode.
++ */
++void s3c_pm_save_gpios(void)
++{
++ struct s3c_gpio_chip *ourchip;
++ unsigned int gpio_nr;
++
++ for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
++ ourchip = s3c_gpiolib_getchip(gpio_nr);
++ if (!ourchip)
++ continue;
++
++ s3c_pm_save_gpio(ourchip);
++
++ S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
++ ourchip->chip.label,
++ ourchip->pm_save[0],
++ ourchip->pm_save[1],
++ ourchip->pm_save[2],
++ ourchip->pm_save[3]);
++
++ gpio_nr += ourchip->chip.ngpio;
++ gpio_nr += CONFIG_S3C_GPIO_SPACE;
++ }
++}
++
++/**
++ * s3c_pm_resume_gpio() - restore gpio chip data after suspend
++ * @ourchip: The suspended chip.
++ */
++static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
++{
++ struct s3c_gpio_pm *pm = ourchip->pm;
++
++ if (pm == NULL || pm->resume == NULL)
++ S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
++ else
++ pm->resume(ourchip);
++}
++
++void s3c_pm_restore_gpios(void)
++{
++ struct s3c_gpio_chip *ourchip;
++ unsigned int gpio_nr;
++
++ for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
++ ourchip = s3c_gpiolib_getchip(gpio_nr);
++ if (!ourchip)
++ continue;
++
++ s3c_pm_resume_gpio(ourchip);
++
++ gpio_nr += ourchip->chip.ngpio;
++ gpio_nr += CONFIG_S3C_GPIO_SPACE;
++ }
++}
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/clock-dclk.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/clock-dclk.c 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/clock-dclk.c 2009-05-18 19:07:48.000000000 +0200
+@@ -18,6 +18,7 @@
+
+ #include <mach/regs-clock.h>
+ #include <mach/regs-gpio.h>
++#include <mach/hardware.h>
+
+ #include <plat/clock.h>
+ #include <plat/cpu.h>
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/cpu.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/cpu.c 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/cpu.c 2009-05-18 19:07:48.000000000 +0200
+@@ -61,6 +61,7 @@
+ static const char name_s3c2412[] = "S3C2412";
+ static const char name_s3c2440[] = "S3C2440";
+ static const char name_s3c2442[] = "S3C2442";
++static const char name_s3c2442b[] = "S3C2442B";
+ static const char name_s3c2443[] = "S3C2443";
+ static const char name_s3c2410a[] = "S3C2410A";
+ static const char name_s3c2440a[] = "S3C2440A";
+@@ -112,6 +113,15 @@
+ .name = name_s3c2442
+ },
+ {
++ .idcode = 0x32440aab,
++ .idmask = 0xffffffff,
++ .map_io = s3c244x_map_io,
++ .init_clocks = s3c244x_init_clocks,
++ .init_uarts = s3c244x_init_uarts,
++ .init = s3c2442_init,
++ .name = name_s3c2442b
++ },
++ {
+ .idcode = 0x32412001,
+ .idmask = 0xffffffff,
+ .map_io = s3c2412_map_io,
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/gpiolib.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/gpiolib.c 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/gpiolib.c 2009-05-18 19:07:48.000000000 +0200
+@@ -19,9 +19,10 @@
+ #include <linux/io.h>
+ #include <linux/gpio.h>
+
+-#include <mach/gpio-core.h>
++#include <plat/gpio-core.h>
+ #include <mach/hardware.h>
+ #include <asm/irq.h>
++#include <plat/pm.h>
+
+ #include <mach/regs-gpio.h>
+
+@@ -78,6 +79,7 @@
+ struct s3c_gpio_chip s3c24xx_gpios[] = {
+ [0] = {
+ .base = S3C24XX_GPIO_BASE(S3C2410_GPA0),
++ .pm = __gpio_pm(&s3c_gpio_pm_1bit),
+ .chip = {
+ .base = S3C2410_GPA0,
+ .owner = THIS_MODULE,
+@@ -89,6 +91,7 @@
+ },
+ [1] = {
+ .base = S3C24XX_GPIO_BASE(S3C2410_GPB0),
++ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .chip = {
+ .base = S3C2410_GPB0,
+ .owner = THIS_MODULE,
+@@ -98,6 +101,7 @@
+ },
+ [2] = {
+ .base = S3C24XX_GPIO_BASE(S3C2410_GPC0),
++ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .chip = {
+ .base = S3C2410_GPC0,
+ .owner = THIS_MODULE,
+@@ -107,6 +111,7 @@
+ },
+ [3] = {
+ .base = S3C24XX_GPIO_BASE(S3C2410_GPD0),
++ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .chip = {
+ .base = S3C2410_GPD0,
+ .owner = THIS_MODULE,
+@@ -116,6 +121,7 @@
+ },
+ [4] = {
+ .base = S3C24XX_GPIO_BASE(S3C2410_GPE0),
++ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .chip = {
+ .base = S3C2410_GPE0,
+ .label = "GPIOE",
+@@ -125,6 +131,7 @@
+ },
+ [5] = {
+ .base = S3C24XX_GPIO_BASE(S3C2410_GPF0),
++ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .chip = {
+ .base = S3C2410_GPF0,
+ .owner = THIS_MODULE,
+@@ -135,12 +142,23 @@
+ },
+ [6] = {
+ .base = S3C24XX_GPIO_BASE(S3C2410_GPG0),
++ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .chip = {
+ .base = S3C2410_GPG0,
+ .owner = THIS_MODULE,
+ .label = "GPIOG",
+- .ngpio = 10,
+ .to_irq = s3c24xx_gpiolib_bankg_toirq,
++ .ngpio = 16,
++ },
++ },
++ [7] = {
++ .base = S3C24XX_GPIO_BASE(S3C2410_GPH0),
++ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
++ .chip = {
++ .base = S3C2410_GPH0,
++ .owner = THIS_MODULE,
++ .label = "GPIOH",
++ .ngpio = 11,
+ },
+ },
+ };
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/pm-core.h
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/include/plat/pm-core.h 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/pm-core.h 2009-05-18 19:07:48.000000000 +0200
+@@ -57,3 +57,8 @@
+ s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
+ s3c_irqwake_eintmask);
+ }
++
++static inline void s3c_pm_arch_update_uart(void __iomem *regs,
++ struct pm_uart_save *save)
++{
++}
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/irq-pm.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/irq-pm.c 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/irq-pm.c 2009-05-18 19:07:48.000000000 +0200
+@@ -15,6 +15,7 @@
+ #include <linux/module.h>
+ #include <linux/interrupt.h>
+ #include <linux/sysdev.h>
++#include <linux/irq.h>
+
+ #include <plat/cpu.h>
+ #include <plat/pm.h>
+@@ -80,7 +81,9 @@
+
+ int s3c24xx_irq_resume(struct sys_device *dev)
+ {
+- unsigned int i;
++ unsigned int i, irq;
++ unsigned long eintpnd;
++ struct irq_desc *desc;
+
+ for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+@@ -91,5 +94,25 @@
+ s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+ __raw_writel(save_eintmask, S3C24XX_EINTMASK);
+
++ /*
++ * ACK those interrupts which are now masked and pending.
++ * Level interrupts if not ACKed here, create an interrupt storm
++ * because they are not handled at all.
++ */
++
++ eintpnd = __raw_readl(S3C24XX_EINTPEND);
++
++ eintpnd &= save_eintmask;
++ eintpnd &= ~0xff; /* ignore lower irqs */
++
++ while (eintpnd) {
++ irq = __ffs(eintpnd);
++ eintpnd &= ~(1 << irq);
++
++ irq += (IRQ_EINT4 - 4);
++ desc = irq_to_desc(irq);
++ desc->chip->ack(irq);
++ }
++
+ return 0;
+ }
+Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/pm.c
+===================================================================
+--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/pm.c 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/pm.c 2009-05-18 19:07:48.000000000 +0200
+@@ -39,6 +39,7 @@
+ #include <mach/regs-gpio.h>
+ #include <mach/regs-mem.h>
+ #include <mach/regs-irq.h>
++#include <mach/hardware.h>
+
+ #include <asm/mach/time.h>
+
+@@ -75,43 +76,10 @@
+ SAVE_ITEM(S3C2410_CLKSLOW),
+ };
+
+-static struct gpio_sleep {
+- void __iomem *base;
+- unsigned int gpcon;
+- unsigned int gpdat;
+- unsigned int gpup;
+-} gpio_save[] = {
+- [0] = {
+- .base = S3C2410_GPACON,
+- },
+- [1] = {
+- .base = S3C2410_GPBCON,
+- },
+- [2] = {
+- .base = S3C2410_GPCCON,
+- },
+- [3] = {
+- .base = S3C2410_GPDCON,
+- },
+- [4] = {
+- .base = S3C2410_GPECON,
+- },
+- [5] = {
+- .base = S3C2410_GPFCON,
+- },
+- [6] = {
+- .base = S3C2410_GPGCON,
+- },
+- [7] = {
+- .base = S3C2410_GPHCON,
+- },
+-};
+-
+ static struct sleep_save misc_save[] = {
+ SAVE_ITEM(S3C2410_DCLKCON),
+ };
+
+-
+ /* s3c_pm_check_resume_pin
+ *
+ * check to see if the pin is configured correctly for sleep mode, and
+@@ -165,186 +133,6 @@
+ }
+ }
+
+-/* offsets for CON/DAT/UP registers */
+-
+-#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON)
+-#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON)
+-#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON)
+-
+-/* s3c_pm_save_gpios()
+- *
+- * Save the state of the GPIOs
+- */
+-
+-void s3c_pm_save_gpios(void)
+-{
+- struct gpio_sleep *gps = gpio_save;
+- unsigned int gpio;
+-
+- for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
+- void __iomem *base = gps->base;
+-
+- gps->gpcon = __raw_readl(base + OFFS_CON);
+- gps->gpdat = __raw_readl(base + OFFS_DAT);
+-
+- if (gpio > 0)
+- gps->gpup = __raw_readl(base + OFFS_UP);
+-
+- }
+-}
+-
+-/* Test whether the given masked+shifted bits of an GPIO configuration
+- * are one of the SFN (special function) modes. */
+-
+-static inline int is_sfn(unsigned long con)
+-{
+- return (con == 2 || con == 3);
+-}
+-
+-/* Test if the given masked+shifted GPIO configuration is an input */
+-
+-static inline int is_in(unsigned long con)
+-{
+- return con == 0;
+-}
+-
+-/* Test if the given masked+shifted GPIO configuration is an output */
+-
+-static inline int is_out(unsigned long con)
+-{
+- return con == 1;
+-}
+-
+-/**
+- * s3c2410_pm_restore_gpio() - restore the given GPIO bank
+- * @index: The number of the GPIO bank being resumed.
+- * @gps: The sleep confgiuration for the bank.
+- *
+- * Restore one of the GPIO banks that was saved during suspend. This is
+- * not as simple as once thought, due to the possibility of glitches
+- * from the order that the CON and DAT registers are set in.
+- *
+- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+- * combinations of changes to check. Three of these, if the pin stays
+- * in the same configuration can be discounted. This leaves us with
+- * the following:
+- *
+- * { IN => OUT } Change DAT first
+- * { IN => SFN } Change CON first
+- * { OUT => SFN } Change CON first, so new data will not glitch
+- * { OUT => IN } Change CON first, so new data will not glitch
+- * { SFN => IN } Change CON first
+- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+- *
+- * We do not currently deal with the UP registers as these control
+- * weak resistors, so a small delay in change should not need to bring
+- * these into the calculations.
+- *
+- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+- * state for when it is next output.
+- */
+-
+-static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
+-{
+- void __iomem *base = gps->base;
+- unsigned long gps_gpcon = gps->gpcon;
+- unsigned long gps_gpdat = gps->gpdat;
+- unsigned long old_gpcon;
+- unsigned long old_gpdat;
+- unsigned long old_gpup = 0x0;
+- unsigned long gpcon;
+- int nr;
+-
+- old_gpcon = __raw_readl(base + OFFS_CON);
+- old_gpdat = __raw_readl(base + OFFS_DAT);
+-
+- if (base == S3C2410_GPACON) {
+- /* GPACON only has one bit per control / data and no PULLUPs.
+- * GPACON[x] = 0 => Output, 1 => SFN */
+-
+- /* first set all SFN bits to SFN */
+-
+- gpcon = old_gpcon | gps->gpcon;
+- __raw_writel(gpcon, base + OFFS_CON);
+-
+- /* now set all the other bits */
+-
+- __raw_writel(gps_gpdat, base + OFFS_DAT);
+- __raw_writel(gps_gpcon, base + OFFS_CON);
+- } else {
+- unsigned long old, new, mask;
+- unsigned long change_mask = 0x0;
+-
+- old_gpup = __raw_readl(base + OFFS_UP);
+-
+- /* Create a change_mask of all the items that need to have
+- * their CON value changed before their DAT value, so that
+- * we minimise the work between the two settings.
+- */
+-
+- for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+- old = (old_gpcon & mask) >> nr;
+- new = (gps_gpcon & mask) >> nr;
+-
+- /* If there is no change, then skip */
+-
+- if (old == new)
+- continue;
+-
+- /* If both are special function, then skip */
+-
+- if (is_sfn(old) && is_sfn(new))
+- continue;
+-
+- /* Change is IN => OUT, do not change now */
+-
+- if (is_in(old) && is_out(new))
+- continue;
+-
+- /* Change is SFN => OUT, do not change now */
+-
+- if (is_sfn(old) && is_out(new))
+- continue;
+-
+- /* We should now be at the case of IN=>SFN,
+- * OUT=>SFN, OUT=>IN, SFN=>IN. */
+-
+- change_mask |= mask;
+- }
+-
+- /* Write the new CON settings */
+-
+- gpcon = old_gpcon & ~change_mask;
+- gpcon |= gps_gpcon & change_mask;
+-
+- __raw_writel(gpcon, base + OFFS_CON);
+-
+- /* Now change any items that require DAT,CON */
+-
+- __raw_writel(gps_gpdat, base + OFFS_DAT);
+- __raw_writel(gps_gpcon, base + OFFS_CON);
+- __raw_writel(gps->gpup, base + OFFS_UP);
+- }
+-
+- S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
+- index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+-}
+-
+-
+-/** s3c2410_pm_restore_gpios()
+- *
+- * Restore the state of the GPIOs
+- */
+-
+-void s3c_pm_restore_gpios(void)
+-{
+- struct gpio_sleep *gps = gpio_save;
+- int gpio;
+-
+- for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
+- s3c2410_pm_restore_gpio(gpio, gps);
+- }
+-}
+
+ void s3c_pm_restore_core(void)
+ {
+Index: linux-2.6.30-rc6/drivers/mmc/host/Kconfig
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mmc/host/Kconfig 2009-05-18 19:07:38.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mmc/host/Kconfig 2009-05-18 19:07:48.000000000 +0200
+@@ -37,13 +37,6 @@
+
+ If unsure, say N.
+
+-config MMC_SDHCI_IO_ACCESSORS
+- bool
+- depends on MMC_SDHCI
+- help
+- This is silent Kconfig symbol that is selected by the drivers that
+- need to overwrite SDHCI IO memory accessors.
+-
+ config MMC_SDHCI_PCI
+ tristate "SDHCI support on PCI bus"
+ depends on MMC_SDHCI && PCI
+@@ -55,6 +48,18 @@
+
+ If unsure, say N.
+
++config MMC_SDHCI_S3C
++ tristate "SDHCI support on Samsung S3C SoC"
++ depends on MMC_SDHCI && PLAT_S3C24XX
++ help
++ This selects the Secure Digital Host Controller Interface (SDHCI)
++ often referrered to as the HSMMC block in some of the Samsung S3C
++ range of SoC.
++
++ If you have a controller with this interface, say Y or M here.
++
++ If unsure, say N.
++
+ config MMC_RICOH_MMC
+ tristate "Ricoh MMC Controller Disabler (EXPERIMENTAL)"
+ depends on MMC_SDHCI_PCI
+@@ -72,17 +77,6 @@
+
+ If unsure, say Y.
+
+-config MMC_SDHCI_OF
+- tristate "SDHCI support on OpenFirmware platforms"
+- depends on MMC_SDHCI && PPC_OF
+- select MMC_SDHCI_IO_ACCESSORS
+- help
+- This selects the OF support for Secure Digital Host Controller
+- Interfaces. So far, only the Freescale eSDHC controller is known
+- to exist on OF platforms.
+-
+- If unsure, say N.
+-
+ config MMC_OMAP
+ tristate "TI OMAP Multimedia Card Interface support"
+ depends on ARCH_OMAP
+@@ -163,16 +157,6 @@
+
+ If unsure, say N.
+
+-config MMC_MXC
+- tristate "Freescale i.MX2/3 Multimedia Card Interface support"
+- depends on ARCH_MXC
+- help
+- This selects the Freescale i.MX2/3 Multimedia card Interface.
+- If you have a i.MX platform with a Multimedia Card slot,
+- say Y or M here.
+-
+- If unsure, say N.
+-
+ config MMC_TIFM_SD
+ tristate "TI Flash Media MMC/SD Interface support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && PCI
+Index: linux-2.6.30-rc6/drivers/mmc/host/Makefile
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mmc/host/Makefile 2009-05-18 19:07:38.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mmc/host/Makefile 2009-05-18 19:07:48.000000000 +0200
+@@ -9,11 +9,10 @@
+ obj-$(CONFIG_MMC_ARMMMCI) += mmci.o
+ obj-$(CONFIG_MMC_PXA) += pxamci.o
+ obj-$(CONFIG_MMC_IMX) += imxmmc.o
+-obj-$(CONFIG_MMC_MXC) += mxcmmc.o
+ obj-$(CONFIG_MMC_SDHCI) += sdhci.o
+ obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
++obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
+ obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o
+-obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
+ obj-$(CONFIG_MMC_WBSD) += wbsd.o
+ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP) += omap.o
+@@ -21,7 +20,6 @@
+ obj-$(CONFIG_MMC_AT91) += at91_mci.o
+ obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
+ obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
+-obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o
+ obj-$(CONFIG_MMC_SPI) += mmc_spi.o
+ ifeq ($(CONFIG_OF),y)
+ obj-$(CONFIG_MMC_SPI) += of_mmc_spi.o
+Index: linux-2.6.30-rc6/drivers/mmc/host/s3cmci.c
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mmc/host/s3cmci.c 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mmc/host/s3cmci.c 2009-05-18 19:07:48.000000000 +0200
+@@ -2,6 +2,7 @@
+ * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
+ *
+ * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
++ * Copyright (C) 2007 Harald Welte <laforge@gnumonks.org>
+ *
+ * Current driver maintained by Ben Dooks and Simtec Electronics
+ * Copyright (C) 2008 Simtec Electronics <ben-linux@fluff.org>
+@@ -24,9 +25,18 @@
+
+ #include <mach/regs-sdi.h>
+ #include <mach/regs-gpio.h>
++#include <mach/hardware.h>
+
+ #include <plat/mci.h>
+
++#include <asm/dma.h>
++#include <asm/dma-mapping.h>
++
++#include <asm/io.h>
++#include <mach/regs-gpio.h>
++#include <mach/mci.h>
++#include <mach/dma.h>
++
+ #include "s3cmci.h"
+
+ #define DRIVER_NAME "s3c-mci"
+@@ -47,6 +57,9 @@
+ static const int dbgmap_info = dbg_info | dbg_conf;
+ static const int dbgmap_debug = dbg_err | dbg_debug;
+
++static int f_max = -1; /* override maximum frequency limit */
++static int persist; /* keep interface alive across suspend/resume */
++
+ #define dbg(host, channels, args...) \
+ do { \
+ if (dbgmap_err & channels) \
+@@ -280,8 +293,11 @@
+ * an even multiple of 4. */
+ if (fifo >= host->pio_bytes)
+ fifo = host->pio_bytes;
+- else
++ else {
+ fifo -= fifo & 3;
++ if (!fifo)
++ break;
++ }
+
+ host->pio_bytes -= fifo;
+ host->pio_count += fifo;
+@@ -329,7 +345,7 @@
+
+ to_ptr = host->base + host->sdidata;
+
+- while ((fifo = fifo_free(host)) > 3) {
++ while ((fifo = fifo_free(host))) {
+ if (!host->pio_bytes) {
+ res = get_data_buffer(host, &host->pio_bytes,
+ &host->pio_ptr);
+@@ -353,8 +369,11 @@
+ * words, so round down to an even multiple of 4. */
+ if (fifo >= host->pio_bytes)
+ fifo = host->pio_bytes;
+- else
++ else {
+ fifo -= fifo & 3;
++ if (!fifo)
++ break;
++ }
+
+ host->pio_bytes -= fifo;
+ host->pio_count += fifo;
+@@ -373,7 +392,6 @@
+ {
+ struct s3cmci_host *host = (struct s3cmci_host *) data;
+
+-
+ disable_irq(host->irq);
+
+ if (host->pio_active == XFER_WRITE)
+@@ -614,7 +632,6 @@
+
+ spin_unlock_irqrestore(&host->complete_lock, iflags);
+ return IRQ_HANDLED;
+-
+ }
+
+ /*
+@@ -789,11 +806,11 @@
+
+ last_source = source;
+
+- s3c2410_dma_devconfig(host->dma, source, 3,
++ s3c2410_dma_devconfig(host->dma, source,
+ host->mem->start + host->sdidata);
+
+ if (!setup_ok) {
+- s3c2410_dma_config(host->dma, 4, 0);
++ s3c2410_dma_config(host->dma, 4);
+ s3c2410_dma_set_buffdone_fn(host->dma,
+ s3cmci_dma_done_callback);
+ s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
+@@ -1026,6 +1043,7 @@
+ dbg(host, dbg_err, "data prepare error %d\n", res);
+ cmd->error = res;
+ cmd->data->error = res;
++ cmd->data->error = -EIO;
+
+ mmc_request_done(mmc, mrq);
+ return;
+@@ -1263,10 +1281,8 @@
+ host->is2440 = is2440;
+
+ host->pdata = pdev->dev.platform_data;
+- if (!host->pdata) {
+- pdev->dev.platform_data = &s3cmci_def_pdata;
++ if (!host->pdata)
+ host->pdata = &s3cmci_def_pdata;
+- }
+
+ spin_lock_init(&host->complete_lock);
+ tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
+@@ -1379,6 +1395,18 @@
+ mmc->f_min = host->clk_rate / (host->clk_div * 256);
+ mmc->f_max = host->clk_rate / host->clk_div;
+
++ if (f_max >= 0) {
++ unsigned f = f_max;
++
++ if (f < mmc->f_min)
++ f = mmc->f_min;
++ if (mmc->f_max > f) {
++ dev_info(&pdev->dev, "f_max lowered from %u to %u Hz\n",
++ mmc->f_max, f);
++ mmc->f_max = f;
++ }
++ }
++
+ if (host->pdata->ocr_avail)
+ mmc->ocr_avail = host->pdata->ocr_avail;
+
+@@ -1491,18 +1519,60 @@
+
+ #ifdef CONFIG_PM
+
++static int save_regs(struct mmc_host *mmc)
++{
++ struct s3cmci_host *host = mmc_priv(mmc);
++ unsigned long flags;
++ unsigned from;
++ u32 *to = host->saved;
++
++ mmc_flush_scheduled_work();
++
++ local_irq_save(flags);
++ for (from = S3C2410_SDICON; from != S3C2410_SDIIMSK+4; from += 4)
++ if (from != host->sdidata)
++ *to++ = readl(host->base + from);
++ BUG_ON(to-host->saved != ARRAY_SIZE(host->saved));
++ local_irq_restore(flags);
++
++ return 0;
++}
++
++static int restore_regs(struct mmc_host *mmc)
++{
++ struct s3cmci_host *host = mmc_priv(mmc);
++ unsigned long flags;
++ unsigned to;
++ u32 *from = host->saved;
++
++ /*
++ * Before we begin with the necromancy, make sure we don't
++ * inadvertently start something we'll regret microseconds later.
++ */
++ from[S3C2410_SDICMDCON - S3C2410_SDICON] = 0;
++
++ local_irq_save(flags);
++ for (to = S3C2410_SDICON; to != S3C2410_SDIIMSK+4; to += 4)
++ if (to != host->sdidata)
++ writel(*from++, host->base + to);
++ BUG_ON(from-host->saved != ARRAY_SIZE(host->saved));
++ local_irq_restore(flags);
++
++ return 0;
++}
++
+ static int s3cmci_suspend(struct platform_device *dev, pm_message_t state)
+ {
+ struct mmc_host *mmc = platform_get_drvdata(dev);
+
+- return mmc_suspend_host(mmc, state);
++ return persist ? save_regs(mmc) : mmc_suspend_host(mmc, state);
+ }
+
+ static int s3cmci_resume(struct platform_device *dev)
+ {
+ struct mmc_host *mmc = platform_get_drvdata(dev);
+
+- return mmc_resume_host(mmc);
++ return persist ? restore_regs(mmc) : mmc_resume_host(mmc);
+ }
+
+ #else /* CONFIG_PM */
+@@ -1560,9 +1630,13 @@
+ module_init(s3cmci_init);
+ module_exit(s3cmci_exit);
+
++module_param(f_max, int, 0644);
++module_param(persist, int, 0644);
++
+ MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
+ MODULE_LICENSE("GPL v2");
+ MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>");
+ MODULE_ALIAS("platform:s3c2410-sdi");
+ MODULE_ALIAS("platform:s3c2412-sdi");
+ MODULE_ALIAS("platform:s3c2440-sdi");
++
+Index: linux-2.6.30-rc6/drivers/mmc/host/s3cmci.h
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mmc/host/s3cmci.h 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mmc/host/s3cmci.h 2009-05-18 19:07:48.000000000 +0200
+@@ -8,6 +8,10 @@
+ * published by the Free Software Foundation.
+ */
+
++
++#include <mach/regs-sdi.h>
++#include <linux/regulator/consumer.h>
++
+ /* FIXME: DMA Resource management ?! */
+ #define S3CMCI_DMA 0
+
+@@ -68,7 +72,16 @@
+ unsigned int ccnt, dcnt;
+ struct tasklet_struct pio_tasklet;
+
++ /*
++ * Here's where we save the registers during suspend. Note that we skip
++ * SDIDATA, which is at different positions on 2410 and 2440, so
++ * there's no "+1" in the array size.
++ */
++ u32 saved[(S3C2410_SDIIMSK-S3C2410_SDICON)/4];
++
+ #ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+ #endif
++
++ struct regulator *regulator;
+ };
+Index: linux-2.6.30-rc6/drivers/mmc/host/sdhci-s3c.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.30-rc6/drivers/mmc/host/sdhci-s3c.c 2009-05-18 19:07:48.000000000 +0200
+@@ -0,0 +1,419 @@
++/* linux/drivers/mmc/host/sdhci-s3c.c
++ *
++ * Copyright 2008 Openmoko Inc.
++ * Copyright 2008 Simtec Electronics
++ * Ben Dooks <ben@simtec.co.uk>
++ * http://armlinux.simtec.co.uk/
++ *
++ * SDHCI (HSMMC) support for Samsung SoC
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/io.h>
++
++#include <linux/mmc/host.h>
++
++#include <plat/regs-sdhci.h>
++#include <plat/sdhci.h>
++
++#include "sdhci.h"
++
++#define MAX_BUS_CLK (4)
++
++struct sdhci_s3c {
++ struct sdhci_host *host;
++ struct platform_device *pdev;
++ struct resource *ioarea;
++ struct s3c_sdhci_platdata *pdata;
++ unsigned int cur_clk;
++
++ struct clk *clk_io; /* clock for io bus */
++ struct clk *clk_bus[MAX_BUS_CLK];
++};
++
++static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
++{
++ return sdhci_priv(host);
++}
++
++static u32 get_curclk(u32 ctrl2)
++{
++ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
++ ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
++
++ return ctrl2;
++}
++
++static void sdhci_s3c_check_sclk(struct sdhci_host *host)
++{
++ struct sdhci_s3c *ourhost = to_s3c(host);
++ u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
++
++ if (get_curclk(tmp) != ourhost->cur_clk) {
++ dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n");
++
++ tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
++ tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
++ writel(tmp, host->ioaddr + 0x80);
++ }
++}
++
++static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
++{
++ struct sdhci_s3c *ourhost = to_s3c(host);
++ struct clk *busclk;
++ unsigned int rate, max;
++ int clk;
++
++ /* note, a reset will reset the clock source */
++
++ sdhci_s3c_check_sclk(host);
++
++ for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) {
++ busclk = ourhost->clk_bus[clk];
++ if (!busclk)
++ continue;
++
++ rate = clk_get_rate(busclk);
++ if (rate > max)
++ max = rate;
++ }
++
++ return max;
++}
++
++static unsigned int sdhci_s3c_get_timeout_clk(struct sdhci_host *host)
++{
++ return sdhci_s3c_get_max_clk(host) / 1000000;
++}
++
++static void sdhci_s3c_set_ios(struct sdhci_host *host,
++ struct mmc_ios *ios)
++{
++ struct sdhci_s3c *ourhost = to_s3c(host);
++ struct s3c_sdhci_platdata *pdata = ourhost->pdata;
++ int width;
++
++ sdhci_s3c_check_sclk(host);
++
++ if (ios->power_mode != MMC_POWER_OFF) {
++ switch (ios->bus_width) {
++ case MMC_BUS_WIDTH_4:
++ width = 4;
++ break;
++ case MMC_BUS_WIDTH_1:
++ width = 1;
++ break;
++ default:
++ BUG();
++ }
++
++ if (pdata->cfg_gpio)
++ pdata->cfg_gpio(ourhost->pdev, width);
++ }
++
++ if (pdata->cfg_card)
++ pdata->cfg_card(ourhost->pdev, host->ioaddr,
++ ios, host->mmc->card);
++}
++
++static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
++ unsigned int src,
++ unsigned int wanted)
++{
++ unsigned long rate;
++ struct clk *clksrc = ourhost->clk_bus[src];
++ int div;
++
++ if (!clksrc)
++ return UINT_MAX;
++
++ rate = clk_get_rate(clksrc);
++
++ for (div = 1; div < 256; div *= 2) {
++ if ((rate / div) <= wanted)
++ break;
++ }
++
++ dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
++ src, rate, wanted, rate / div);
++
++ return (wanted - (rate / div));
++}
++
++static void sdhci_s3c_change_clock(struct sdhci_host *host, unsigned int clock)
++{
++ struct sdhci_s3c *ourhost = to_s3c(host);
++ unsigned int best = UINT_MAX;
++ unsigned int delta;
++ int best_src = 0;
++ int src;
++ u32 ctrl;
++
++ for (src = 0; src < MAX_BUS_CLK; src++) {
++ delta = sdhci_s3c_consider_clock(ourhost, src, clock);
++ if (delta < best) {
++ best = delta;
++ best_src = src;
++ }
++ }
++
++ dev_dbg(&ourhost->pdev->dev,
++ "selected source %d, clock %d, delta %d\n",
++ best_src, clock, best);
++
++ /* turn clock off to card before changing clock source */
++ writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
++
++ /* select the new clock source */
++
++ if (ourhost->cur_clk != best_src) {
++ struct clk *clk = ourhost->clk_bus[best_src];
++
++ ourhost->cur_clk = best_src;
++ host->max_clk = clk_get_rate(clk);
++ host->timeout_clk = host->max_clk / 1000000;
++
++ ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
++ ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
++ ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
++ writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
++ }
++
++ sdhci_change_clock(host, clock);
++}
++
++static struct sdhci_ops sdhci_s3c_ops = {
++ .get_max_clock = sdhci_s3c_get_max_clk,
++ .get_timeout_clock = sdhci_s3c_get_timeout_clk,
++ .change_clock = sdhci_s3c_change_clock,
++ .set_ios = sdhci_s3c_set_ios,
++};
++
++/*
++ * call this when you need sd stack to recognize insertion or removal of card
++ * that can't be told by SDHCI regs
++ */
++
++void sdhci_s3c_force_presence_change(struct platform_device *pdev)
++{
++ struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
++
++ dev_info(&pdev->dev, "sdhci_s3c_force_presence_change called\n");
++ mmc_detect_change(pdata->sdhci_host->mmc, msecs_to_jiffies(200));
++}
++EXPORT_SYMBOL_GPL(sdhci_s3c_force_presence_change);
++
++
++static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
++{
++ struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
++ struct device *dev = &pdev->dev;
++ struct sdhci_host *host;
++ struct sdhci_s3c *sc;
++ struct resource *res;
++ int ret, irq, ptr, clks;
++
++ if (!pdata) {
++ dev_err(dev, "no device data specified\n");
++ return -ENOENT;
++ }
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0) {
++ dev_err(dev, "no irq specified\n");
++ return irq;
++ }
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ dev_err(dev, "no memory specified\n");
++ return -ENOENT;
++ }
++
++ host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
++ if (IS_ERR(host)) {
++ dev_err(dev, "sdhci_alloc_host() failed\n");
++ return PTR_ERR(host);
++ }
++
++ pdata->sdhci_host = host;
++
++ sc = sdhci_priv(host);
++
++ sc->host = host;
++ sc->pdev = pdev;
++ sc->pdata = pdata;
++
++ platform_set_drvdata(pdev, host);
++
++ sc->clk_io = clk_get(dev, "hsmmc");
++ if (IS_ERR(sc->clk_io)) {
++ dev_err(dev, "failed to get io clock\n");
++ ret = PTR_ERR(sc->clk_io);
++ goto err_io_clk;
++ }
++
++ /* enable the local io clock and keep it running for the moment. */
++ clk_enable(sc->clk_io);
++
++ for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
++ struct clk *clk;
++ char *name = pdata->clocks[ptr];
++
++ if (name == NULL)
++ continue;
++
++ clk = clk_get(dev, name);
++ if (IS_ERR(clk)) {
++ dev_err(dev, "failed to get clock %s\n", name);
++ continue;
++ }
++
++ clks++;
++ sc->clk_bus[ptr] = clk;
++ clk_enable(clk);
++
++ dev_info(dev, "clock source %d: %s (%ld Hz)\n",
++ ptr, name, clk_get_rate(clk));
++ }
++
++ if (clks == 0) {
++ dev_err(dev, "failed to find any bus clocks\n");
++ ret = -ENOENT;
++ goto err_no_busclks;
++ }
++
++ sc->ioarea = request_mem_region(res->start, resource_size(res),
++ mmc_hostname(host->mmc));
++ if (!sc->ioarea) {
++ dev_err(dev, "failed to reserve register area\n");
++ ret = -ENXIO;
++ goto err_req_regs;
++ }
++
++ host->ioaddr = ioremap_nocache(res->start, resource_size(res));
++ if (!host->ioaddr) {
++ dev_err(dev, "failed to map registers\n");
++ ret = -ENXIO;
++ goto err_req_regs;
++ }
++
++ /* Ensure we have minimal gpio selected CMD/CLK/Detect */
++ if (pdata->cfg_gpio)
++ pdata->cfg_gpio(pdev, 0);
++
++ sdhci_s3c_check_sclk(host);
++
++ host->hw_name = "samsung-hsmmc";
++ host->ops = &sdhci_s3c_ops;
++ host->quirks = 0;
++ host->irq = irq;
++
++ /* Setup quirks for the controller */
++
++ /* Currently with ADMA enabled we are getting some length
++ * interrupts that are not being dealt with, do disable
++ * ADMA until this is sorted out. */
++ host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
++ host->quirks |= SDHCI_QUIRK_32BIT_ADMA_SIZE;
++
++ /* It seems we do not get an DATA transfer complete on non-busy
++ * transfers, not sure if this is a problem with this specific
++ * SDHCI block, or a missing configuration that needs to be set. */
++ host->quirks |= SDHCI_QUIRK_NO_TCIRQ_ON_NOT_BUSY;
++
++ host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
++ SDHCI_QUIRK_32BIT_DMA_SIZE);
++
++ ret = sdhci_add_host(host);
++ if (ret) {
++ dev_err(dev, "sdhci_add_host() failed\n");
++ goto err_add_host;
++ }
++
++ return 0;
++
++ err_add_host:
++ release_resource(sc->ioarea);
++ kfree(sc->ioarea);
++
++ err_req_regs:
++ for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
++ clk_disable(sc->clk_bus[ptr]);
++ clk_put(sc->clk_bus[ptr]);
++ }
++
++ err_no_busclks:
++ clk_disable(sc->clk_io);
++ clk_put(sc->clk_io);
++
++ err_io_clk:
++ sdhci_free_host(host);
++
++ return ret;
++}
++
++static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
++{
++ return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int sdhci_s3c_suspend(struct platform_device *dev, pm_message_t pm)
++{
++ struct sdhci_host *host = platform_get_drvdata(dev);
++
++ sdhci_suspend_host(host, pm);
++ return 0;
++}
++
++static int sdhci_s3c_resume(struct platform_device *dev)
++{
++ struct sdhci_host *host = platform_get_drvdata(dev);
++
++ sdhci_resume_host(host);
++ return 0;
++}
++
++#else
++#define sdhci_s3c_suspend NULL
++#define sdhci_s3c_resume NULL
++#endif
++
++static struct platform_driver sdhci_s3c_driver = {
++ .probe = sdhci_s3c_probe,
++ .remove = __devexit_p(sdhci_s3c_remove),
++ .suspend = sdhci_s3c_suspend,
++ .resume = sdhci_s3c_resume,
++ .driver = {
++ .owner = THIS_MODULE,
++ .name = "s3c-sdhci",
++ },
++};
++
++static int __init sdhci_s3c_init(void)
++{
++ return platform_driver_register(&sdhci_s3c_driver);
++}
++
++static void __exit sdhci_s3c_exit(void)
++{
++ platform_driver_unregister(&sdhci_s3c_driver);
++}
++
++module_init(sdhci_s3c_init);
++module_exit(sdhci_s3c_exit);
++
++MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
++MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:s3c-sdhci");
+Index: linux-2.6.30-rc6/drivers/mtd/nand/s3c2410.c
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mtd/nand/s3c2410.c 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mtd/nand/s3c2410.c 2009-05-18 19:07:48.000000000 +0200
+@@ -438,7 +438,7 @@
+ if ((diff0 & ~(1<<fls(diff0))) == 0)
+ return 1;
+
+- return -1;
++ return -EBADMSG;
+ }
+
+ /* ECC functions
+@@ -530,7 +530,12 @@
+ static void s3c2440_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+ {
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
++ u8 *ptr = buf + (len & ~3);
++ int i;
++
+ readsl(info->regs + S3C2440_NFDATA, buf, len / 4);
++ for (i = 0; i != (len & 3); i++)
++ ptr[i] = readb(info->regs + S3C2440_NFDATA);
+ }
+
+ static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+@@ -645,17 +650,31 @@
+ }
+
+ #ifdef CONFIG_MTD_PARTITIONS
++const char *part_probes[] = { "cmdlinepart", NULL };
+ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
+ struct s3c2410_nand_mtd *mtd,
+ struct s3c2410_nand_set *set)
+ {
++ struct mtd_partition *part_info;
++ int nr_part = 0;
++
+ if (set == NULL)
+ return add_mtd_device(&mtd->mtd);
+
+- if (set->nr_partitions > 0 && set->partitions != NULL) {
+- return add_mtd_partitions(&mtd->mtd, set->partitions, set->nr_partitions);
++ if (set->nr_partitions == 0) {
++ mtd->mtd.name = set->name;
++ nr_part = parse_mtd_partitions(&mtd->mtd, part_probes,
++ &part_info, 0);
++ } else {
++ if (set->nr_partitions > 0 && set->partitions != NULL) {
++ nr_part = set->nr_partitions;
++ part_info = set->partitions;
++ }
+ }
+
++ if (nr_part > 0 && part_info)
++ return add_mtd_partitions(&mtd->mtd, part_info, nr_part);
++
+ return add_mtd_device(&mtd->mtd);
+ }
+ #else
+@@ -684,9 +703,13 @@
+ chip->select_chip = s3c2410_nand_select_chip;
+ chip->chip_delay = 50;
+ chip->priv = nmtd;
+- chip->options = 0;
+ chip->controller = &info->controller;
+
++ if (set->flags & S3C2410_NAND_BBT)
++ chip->options = NAND_USE_FLASH_BBT;
++ else
++ chip->options = 0;
++
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ chip->IO_ADDR_W = regs + S3C2410_NFDATA;
+@@ -726,7 +749,7 @@
+ nmtd->mtd.owner = THIS_MODULE;
+ nmtd->set = set;
+
+- if (hardware_ecc) {
++ if (!info->platform->software_ecc && hardware_ecc) {
+ chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+ chip->ecc.correct = s3c2410_nand_correct_data;
+ chip->ecc.mode = NAND_ECC_HW;
+Index: linux-2.6.30-rc6/drivers/mmc/core/core.c
+===================================================================
+--- linux-2.6.30-rc6.orig/drivers/mmc/core/core.c 2009-05-16 06:12:57.000000000 +0200
++++ linux-2.6.30-rc6/drivers/mmc/core/core.c 2009-05-18 19:07:48.000000000 +0200
+@@ -59,10 +59,11 @@
+ /*
+ * Internal function. Flush all scheduled work from the MMC work queue.
+ */
+-static void mmc_flush_scheduled_work(void)
++void mmc_flush_scheduled_work(void)
+ {
+ flush_workqueue(workqueue);
+ }
++EXPORT_SYMBOL_GPL(mmc_flush_scheduled_work);
+
+ /**
+ * mmc_request_done - finish processing an MMC request