diff options
Diffstat (limited to 'target/linux')
-rw-r--r-- | target/linux/lantiq/base-files/etc/uci-defaults/02_network | 5 | ||||
-rw-r--r-- | target/linux/lantiq/dts/ARV7519RW.dtsi | 186 | ||||
-rw-r--r-- | target/linux/lantiq/dts/ARV7519RWV11.dts | 50 | ||||
-rw-r--r-- | target/linux/lantiq/dts/ARV7519RWV12.dts | 50 | ||||
-rw-r--r-- | target/linux/lantiq/image/Makefile | 6 | ||||
-rw-r--r-- | target/linux/lantiq/xrx200/profiles/arv.mk | 22 |
6 files changed, 319 insertions, 0 deletions
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network index ad12384..5768336 100644 --- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network +++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network @@ -130,6 +130,11 @@ TDW8970) lan_mac=$(mtd_get_mac_binary boardconfig 61696) wan_mac=$(macaddr_add "$lan_mac" 1) ;; + +ARV7519*) + lan_mac=$(mtd_get_mac_binary boardconfig 22) + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; esac [ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload" diff --git a/target/linux/lantiq/dts/ARV7519RW.dtsi b/target/linux/lantiq/dts/ARV7519RW.dtsi new file mode 100644 index 0000000..7790470 --- /dev/null +++ b/target/linux/lantiq/dts/ARV7519RW.dtsi @@ -0,0 +1,186 @@ +/include/ "vr9.dtsi" + +/ { + + model = "ARV7519 - Astoria Networks ARV7519RW22-A-LT"; + + chosen { + bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; + }; + + memory@0 { + reg = <0x0 0x8000000>; + }; + + fpi@10000000 { + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + gphy-leds { + lantiq,groups = "gphy0 led1", "gphy1 led1"; + lantiq,function = "gphy"; + lantiq,pull = <2>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + phy-rst { + lantiq,pins = "io42"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io21"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; + }; + + eth@E108000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-net"; + reg = < 0xE108000 0x3000 /* switch */ + 0xE10B100 0x70 /* mdio */ + 0xE10B1D8 0x30 /* mii */ + 0xE10B308 0x30 /* pmac */ + >; + interrupt-parent = <&icu0>; + interrupts = <73 72>; + + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mac-address = [ 00 11 22 33 44 55 ]; + + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + }; + + wan: interface@1 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + mac-address = [ 00 11 22 33 44 56 ]; + lantiq,wan; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 32 0>; + lantiq,portmask = <0x3>; + }; + + pcie@d900000 { + status = "disabled"; + compatible = "lantiq,pcie-xway"; + }; + + pci@E105400 { + status = "disabled"; + compatible = "lantiq,pci-xway"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 22 1>; + linux,code = <0x198>; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio 45 1>; + linux,code = <0xf7>; + }; + wps { + gpios = <&gpio 20 1>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + lan{ /* green */ + label = "lan"; + gpios = <&gpio 02 1>; + }; + voice { /* green */ + label = "voice"; + gpios = <&gpio 29 1>; + }; + message1 { /* red */ + label = "message1"; + gpios = <&gpio 10 1>; + }; + message2 { /* green */ + label = "message2"; + gpios = <&gpio 19 1>; + }; + message3 { /* orange */ + label = "message3"; + gpios = <&gpio 28 1>; + }; + alarm { /* blue */ + label = "alarm"; + gpios = <&gpio 15 1>; + }; + power { /* red */ + label = "power"; + gpios = <&gpio 14 1>; + default-state = "on"; + }; + }; +}; diff --git a/target/linux/lantiq/dts/ARV7519RWV11.dts b/target/linux/lantiq/dts/ARV7519RWV11.dts new file mode 100644 index 0000000..c77ffb4 --- /dev/null +++ b/target/linux/lantiq/dts/ARV7519RWV11.dts @@ -0,0 +1,50 @@ +/dts-v1/; + + +/include/ "ARV7519RW.dtsi" + +/ { + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>, <1 0x2000000 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x000000000000 0x00060000>; + read-only; + }; + + partition@60000 { + label = "uboot_cfg"; + reg = <0x000000060000 0x00020000>; + read-only; + }; + + partition@80000 { + label = "firmware"; + reg = <0x000000080000 0x01f00000>; + }; + + partition@1f80000 { + label = "boardconfig"; + reg = <0x000001f80000 0x00080000>; + read-only; + + }; + + + + }; + }; + }; + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/ + phys = [ 00 01 ]; + }; +}; diff --git a/target/linux/lantiq/dts/ARV7519RWV12.dts b/target/linux/lantiq/dts/ARV7519RWV12.dts new file mode 100644 index 0000000..6f1bf51 --- /dev/null +++ b/target/linux/lantiq/dts/ARV7519RWV12.dts @@ -0,0 +1,50 @@ +/dts-v1/; + + +/include/ "ARV7519RW.dtsi" + +/ { + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>, <1 0x2000000 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x000000000000 0x00060000>; + read-only; + }; + + partition@60000 { + label = "uboot_cfg"; + reg = <0x000000060000 0x00020000>; + read-only; + }; + + partition@80000 { + label = "firmware"; + reg = <0x000000080000 0x01f00000>; + }; + + partition@1f80000 { + label = "boardconfig"; + reg = <0x000001f80000 0x00080000>; + read-only; + + }; + + + + }; + }; + }; + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/ + phys = [ 00 01 ]; + }; +}; diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile index cd36d12..28cb96c 100644 --- a/target/linux/lantiq/image/Makefile +++ b/target/linux/lantiq/image/Makefile @@ -307,6 +307,12 @@ Image/Build/Profile/H201L=$(call Image/Build/$(1),$(1),H201L) Image/BuildKernel/Profile/P2601HNFX=$(call Image/BuildKernel/Template,P2601HNFX) Image/Build/Profile/P2601HNFX=$(call Image/Build/$(1),$(1),P2601HNFX) +Image/BuildKernel/Profile/ARV7519RWV11=$(call Image/BuildKernel/Template,ARV7519RWV11,$(1)) +Image/Build/Profile/ARV7519RWV11=$(call Image/Build/$(1), $(1),ARV7519RWV11) + +Image/BuildKernel/Profile/ARV7519RWV12=$(call Image/BuildKernel/Template,ARV7519RWV12,$(1)) +Image/Build/Profile/ARV7519RWV12=$(call Image/Build/$(1), $(1),ARV7519RWV12) + endif diff --git a/target/linux/lantiq/xrx200/profiles/arv.mk b/target/linux/lantiq/xrx200/profiles/arv.mk index 3172971..ce6f761 100644 --- a/target/linux/lantiq/xrx200/profiles/arv.mk +++ b/target/linux/lantiq/xrx200/profiles/arv.mk @@ -27,3 +27,25 @@ define Profile/VGV7519BRN endef $(eval $(call Profile,VGV7519BRN)) + +define Profile/ARV7519RWV11 + NAME:=Livebox Astoria V1 + PACKAGES:=kmod-ath9k wpad-mini \ + kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \ + kmod-ltq-vdsl-vr9-mei kmod-ltq-vdsl-vr9 \ + kmod-ltq-atm-vr9 ltq-vdsl-vr9-fw-installer \ + ltq-vdsl-app ppp-mod-pppoa +endef + +$(eval $(call Profile,ARV7519RWV11)) + +define Profile/ARV7519RWV12 + NAME:=Livebox Astoria V2 + PACKAGES:=kmod-ath9k wpad-mini \ + kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \ + kmod-ltq-vdsl-vr9-mei kmod-ltq-vdsl-vr9 \ + kmod-ltq-atm-vr9 ltq-vdsl-vr9-fw-installer \ + ltq-vdsl-app ppp-mod-pppoa +endef + +$(eval $(call Profile,ARV7519RWV12)) |