diff options
Diffstat (limited to 'target')
11 files changed, 139 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index bb70fe7..43fda2f 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -102,6 +102,9 @@ get_status_led() { wr512-3gn) status_led="wr512:green:wps" ;; + ur-336un) + status_led="ur336:green:wps" + ;; xdxrn502j) status_led="xdxrn502j:green:power" ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index 81c12de..c987a25 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -32,6 +32,10 @@ ramips_setup_interfaces() f5d8235-v1 | \ f5d8235-v2 | \ + ur-336un) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ;; + v11st-fe) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" @@ -110,6 +114,11 @@ ramips_setup_macs() ;; esr-9753 | \ + ur-336un) + lan_mac=$(ramips_get_mac_binary devdata 16388) + wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1) + ;; + nbg-419n | \ wcr-150gn) lan_mac=$(ramips_get_mac_binary factory 4) diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index c20b80c..486d137 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -152,6 +152,9 @@ ramips_board_name() { *"WR512-3GN-like router") name="wr512-3gn" ;; + *"UR-336UN Wireless N router") + name="ur-336un" + ;; *"AWB WR6202") name="wr6202" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index faa82ec..09683f3 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -40,6 +40,7 @@ platform_check_image() { wl-330n | \ wli-tx4-ag300n | \ whr-g300n |\ + ur-336un |\ wr512-3gn) [ "$magic" != "2705" ] && { echo "Invalid image type." diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index b2d9df9..8498680 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -55,6 +55,7 @@ enum ramips_mach_type { RAMIPS_MACH_WR512_3GN, /* SH-WR512NU/WS-WR512N1-like 3GN*/ RAMIPS_MACH_WR6202, /* Accton WR6202 */ RAMIPS_MACH_XDXRN502J, /* unknown XDX-RN502J */ + RAMIPS_MACH_UR_336UN, /* UPVEL ROUTER */ /* RT3662 based machines */ RAMIPS_MACH_RT_N56U, /* Asus RT-N56U */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index d8370ce..f2a7d84 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -84,6 +84,11 @@ config RT305X_MACH_WR512_3GN select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_UR_336UN + bool "UR-336UN Wireless N router" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_NW718 bool "Netcore NW718" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index 66940cf..9cbd04d 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o +obj-$(CONFIG_RT305X_MACH_UR_336UN) += mach-ur-336un.o obj-$(CONFIG_RT305X_MACH_WL_330N) += mach-wl-330n.o obj-$(CONFIG_RT305X_MACH_WL_330N3G) += mach-wl-330n3g.o obj-$(CONFIG_RT305X_MACH_WL341V3) += mach-wl341v3.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-ur-336un.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-ur-336un.c new file mode 100644 index 0000000..0ff2649 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-ur-336un.c @@ -0,0 +1,92 @@ +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + + +#define UR_336UN_GPIO_LED_3G 9 +#define UR_336UN_GPIO_LED_GATEWAY 11 +#define UR_336UN_GPIO_LED_AP 12 +#define UR_336UN_GPIO_LED_STATION 13 +#define UR_336UN_GPIO_LED_WPS 14 + +#define UR_336UN_GPIO_BUTTON_RESET 10 +#define UR_336UN_GPIO_BUTTON_CONNECT 7 +#define UR_336UN_GPIO_BUTTON_WPS 0 +#define UR_336UN_GPIO_BUTTON_WPS2 8 + +#define UR_336UN_KEYS_POLL_INTERVAL 20 +#define UR_336UN_KEYS_DEBOUNCE_INTERVAL (3 * UR_336UN_KEYS_POLL_INTERVAL) + +static struct gpio_led UR_336UN_leds_gpio[] __initdata = { + { + .name = "ur336:green:3g", + .gpio = UR_336UN_GPIO_LED_3G, + .active_low = 1, + }, { + .name = "ur336:green:gateway", + .gpio = UR_336UN_GPIO_LED_GATEWAY, + .active_low = 1, + }, { + .name = "ur336:green:ap", + .gpio = UR_336UN_GPIO_LED_AP, + .active_low = 1, + }, { + .name = "ur336:green:wps", + .gpio = UR_336UN_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "ur336:green:station", + .gpio = UR_336UN_GPIO_LED_STATION, + .active_low = 1, + } +}; + +static struct gpio_keys_button UR_336UN_gpio_buttons[] __initdata = { + { + .desc = "reset_wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UR_336UN_KEYS_DEBOUNCE_INTERVAL, + .gpio = UR_336UN_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "mode", + .type = EV_KEY, + .code = KEY_M, + .debounce_interval = UR_336UN_KEYS_DEBOUNCE_INTERVAL, + .gpio = UR_336UN_GPIO_BUTTON_CONNECT, + .active_low = 1, + } +}; + +#define UR_336UN_GPIO_MODE \ + ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ + RT305X_GPIO_MODE_MDIO) + +static void __init UR_336UN_init(void) +{ + rt305x_gpio_init(UR_336UN_GPIO_MODE); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(UR_336UN_leds_gpio), + UR_336UN_leds_gpio); + ramips_register_gpio_buttons(-1, UR_336UN_KEYS_POLL_INTERVAL, + ARRAY_SIZE(UR_336UN_gpio_buttons), + UR_336UN_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_UR_336UN, "UR-336UN", "UR-336UN Wireless N router", + UR_336UN_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index d3ddb72..92a8054 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -412,6 +412,11 @@ define Image/Build/Profile/WR5123GN $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr512-3gn-8M,WR512-3GN,ttyS1,57600,phys) endef + +define Image/Build/Profile/UPVEL + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,ur-336un,UR-336UN,ttyS1,57600,phys) +endef + define Image/Build/Profile/WR6202 $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr6202,WR6202,ttyS1,115200,phys) endef diff --git a/target/linux/ramips/rt305x/config-3.3 b/target/linux/ramips/rt305x/config-3.3 index bea6349..0b47fca 100644 --- a/target/linux/ramips/rt305x/config-3.3 +++ b/target/linux/ramips/rt305x/config-3.3 @@ -113,6 +113,7 @@ CONFIG_RT305X_MACH_PWH2004=y CONFIG_RT305X_MACH_RT_G32_REVB=y CONFIG_RT305X_MACH_RT_N10_PLUS=y CONFIG_RT305X_MACH_SL_R7205=y +CONFIG_RT305X_MACH_UR_336UN=y CONFIG_RT305X_MACH_V22RW_2X2=y CONFIG_RT305X_MACH_W306R_V20=y CONFIG_RT305X_MACH_W502U=y diff --git a/target/linux/ramips/rt305x/profiles/upvel.mk b/target/linux/ramips/rt305x/profiles/upvel.mk new file mode 100644 index 0000000..fa1c993 --- /dev/null +++ b/target/linux/ramips/rt305x/profiles/upvel.mk @@ -0,0 +1,18 @@ +# +# Copyright (C) 2012 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/UPVEL + NAME:=UPVEL UR-336UN + PACKAGES:=\ + kmod-usb-core kmod-usb-rt305x-dwc_otg \ + kmod-ledtrig-usbdev +endef + +define Profile/UPVEL/Description + Default package set compatible with URVEL router board. +endef +$(eval $(call Profile,UPVEL)) |