diff options
Diffstat (limited to 'target')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 1 | ||||
| -rw-r--r-- | target/linux/ramips/base-files/etc/diag.sh | 9 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/ramips.sh | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 | ||||
| -rw-r--r-- | target/linux/ramips/dts/K2P.dts | 119 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt7621.mk | 7 |
6 files changed, 136 insertions, 4 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 78ba103..d0f3fce 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -83,6 +83,7 @@ ramips_setup_interfaces() hc5661a|\ hc5962|\ hlk-rm04|\ + k2p|\ kn|\ kn_rc|\ mac1200rv2|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 531c8e0..1349c00 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -157,6 +157,11 @@ get_status_led() { hc5962) status_led="$board:white:status" ;; + k2p|\ + m3|\ + miwifi-nano) + status_led="$board:blue:status" + ;; linkits7688| \ linkits7688d) [ "$1" = "upgrade" ] && status_led="mediatek:orange:wifi" @@ -164,10 +169,6 @@ get_status_led() { m2m) status_led="$board:blue:wifi" ;; - m3|\ - miwifi-nano) - status_led="$board:blue:status" - ;; gl-mt300n-v2) status_led="$board:red:wlan" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 056fab9..e2d7b07 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -262,6 +262,9 @@ ramips_board_detect() { *"JHR-N926R") name="jhr-n926r" ;; + *"K2P") + name="k2p" + ;; *"M3") name="m3" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index e0a2602..36469ca 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -74,6 +74,7 @@ platform_check_image() { jhr-n805r|\ jhr-n825r|\ jhr-n926r|\ + k2p|\ kn|\ kn_rc|\ kn_rf|\ diff --git a/target/linux/ramips/dts/K2P.dts b/target/linux/ramips/dts/K2P.dts new file mode 100644 index 0000000..4089ce6 --- /dev/null +++ b/target/linux/ramips/dts/K2P.dts @@ -0,0 +1,119 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "phicomm,k2p", "mediatek,mt7621-soc"; + model = "Phicomm K2P"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + stat_r { + label = "k2p:red:status"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + + stat_y { + label = "k2p:yellow:status"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + stat_b { + label = "k2p:blue:status"; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "permanent_config"; + reg = <0x50000 0x50000>; + read-only; + }; + + partition@a0000 { + label = "firmware"; + reg = <0xa0000 0xf60000>; + }; + }; +}; + +&pcie { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0>; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0xe000>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 940b9d5..103534e 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -88,6 +88,13 @@ define Device/hc5962 endef TARGET_DEVICES += hc5962 +define Device/k2p + DTS := K2P + IMAGE_SIZE := $(ralink_default_fw_size_16M) + DEVICE_TITLE := Phicomm K2P +endef +TARGET_DEVICES += k2p + define Device/mt7621 DTS := MT7621 BLOCKSIZE := 64k |