1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
|
/*
* Ubiquiti RouterStation support
*
* Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2008 Ubiquiti <support@ubnt.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <asm/mach-ath79/ath79.h>
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "machtypes.h"
#include "pci.h"
#define UBNT_RS_GPIO_LED_RF 2
#define UBNT_RS_GPIO_SW4 8
#define UBNT_LS_SR71_GPIO_LED_D25 0
#define UBNT_LS_SR71_GPIO_LED_D26 1
#define UBNT_LS_SR71_GPIO_LED_D24 2
#define UBNT_LS_SR71_GPIO_LED_D23 4
#define UBNT_LS_SR71_GPIO_LED_D22 5
#define UBNT_LS_SR71_GPIO_LED_D27 6
#define UBNT_LS_SR71_GPIO_LED_D28 7
#define UBNT_KEYS_POLL_INTERVAL 20 /* msecs */
#define UBNT_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_KEYS_POLL_INTERVAL)
static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
{
.name = "ubnt:green:rf",
.gpio = UBNT_RS_GPIO_LED_RF,
.active_low = 0,
}
};
static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = {
{
.name = "ubnt:green:d22",
.gpio = UBNT_LS_SR71_GPIO_LED_D22,
.active_low = 0,
}, {
.name = "ubnt:green:d23",
.gpio = UBNT_LS_SR71_GPIO_LED_D23,
.active_low = 0,
}, {
.name = "ubnt:green:d24",
.gpio = UBNT_LS_SR71_GPIO_LED_D24,
.active_low = 0,
}, {
.name = "ubnt:red:d25",
.gpio = UBNT_LS_SR71_GPIO_LED_D25,
.active_low = 0,
}, {
.name = "ubnt:red:d26",
.gpio = UBNT_LS_SR71_GPIO_LED_D26,
.active_low = 0,
}, {
.name = "ubnt:green:d27",
.gpio = UBNT_LS_SR71_GPIO_LED_D27,
.active_low = 0,
}, {
.name = "ubnt:green:d28",
.gpio = UBNT_LS_SR71_GPIO_LED_D28,
.active_low = 0,
}
};
static struct gpio_keys_button ubnt_gpio_keys[] __initdata = {
{
.desc = "sw4",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL,
.gpio = UBNT_RS_GPIO_SW4,
.active_low = 1,
}
};
static const char *ubnt_part_probes[] = {
"RedBoot",
NULL,
};
static struct flash_platform_data ubnt_flash_data = {
.part_probes = ubnt_part_probes,
};
static void __init ubnt_generic_setup(void)
{
ath79_register_m25p80(&ubnt_flash_data);
ath79_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ubnt_gpio_keys),
ubnt_gpio_keys);
ath79_register_pci();
}
#define UBNT_RS_WAN_PHYMASK BIT(20)
#define UBNT_RS_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19))
static void __init ubnt_rs_setup(void)
{
ubnt_generic_setup();
ath79_register_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK));
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
/*
* There is Secondary MAC address duplicate problem with some
* UBNT HW batches. Do not increase Secondary MAC address by 1
* but do workaround with 'Locally Administrated' bit.
*/
ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ath79_eth1_data.speed = SPEED_100;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_register_eth(0);
ath79_register_eth(1);
ath79_register_usb();
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
ubnt_rs_leds_gpio);
}
MIPS_MACHINE(ATH79_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation",
ubnt_rs_setup);
#define UBNT_RSPRO_WAN_PHYMASK BIT(4)
#define UBNT_RSPRO_LAN_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
static void __init ubnt_rspro_setup(void)
{
ubnt_generic_setup();
ath79_register_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK |
UBNT_RSPRO_LAN_PHYMASK));
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
/*
* There is Secondary MAC address duplicate problem with some
* UBNT HW batches. Do not increase Secondary MAC address by 1
* but do workaround with 'Locally Administrated' bit.
*/
ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_register_eth(0);
ath79_register_eth(1);
ath79_register_usb();
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
ubnt_rs_leds_gpio);
}
MIPS_MACHINE(ATH79_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro",
ubnt_rspro_setup);
static void __init ubnt_lsx_setup(void)
{
ubnt_generic_setup();
}
MIPS_MACHINE(ATH79_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup);
#define UBNT_LSSR71_PHY_MASK BIT(1)
static void __init ubnt_lssr71_setup(void)
{
ubnt_generic_setup();
ath79_register_mdio(0, ~UBNT_LSSR71_PHY_MASK);
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK;
ath79_register_eth(0);
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio),
ubnt_ls_sr71_leds_gpio);
}
MIPS_MACHINE(ATH79_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71",
ubnt_lssr71_setup);
|
