summaryrefslogtreecommitdiff
path: root/target/linux/bcm53xx/patches-4.4/071-0002-phy-bcm-ns-usb3-split-all-writes-into-reg-val-pairs.patch
blob: ddbec2586313c31c588452887dd079fa8cf74229 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
From fff3364a637796611c06f59a6f2be61685d99bfe Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Sun, 2 Apr 2017 18:55:22 +0200
Subject: [PATCH] phy: bcm-ns-usb3: split all writes into reg & val pairs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

So far all the PHY initialization was implemented using some totally
magic values. There was some pattern there but it wasn't clear what is
it about.

Thanks to the patch submitted by Broadcom:
[PATCH 5/6] phy: Add USB3 PHY support for Broadcom NSP SoC
and the upstream "iproc-mdio" driver we now know there is a MDIO bus
underneath with PHY(s) and their registers.

It allows us to clean the driver a bit by making all these values less
magical. The next step is switching to using a proper MDIO layer.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-bcm-ns-usb3.c | 69 ++++++++++++++++++++++++++++++-------------
 1 file changed, 49 insertions(+), 20 deletions(-)

--- a/drivers/phy/phy-bcm-ns-usb3.c
+++ b/drivers/phy/phy-bcm-ns-usb3.c
@@ -2,6 +2,7 @@
  * Broadcom Northstar USB 3.0 PHY Driver
  *
  * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ * Copyright (C) 2016 Broadcom
  *
  * All magic values used for initialization (and related comments) were obtained
  * from Broadcom's SDK:
@@ -23,6 +24,23 @@
 
 #define BCM_NS_USB3_MII_MNG_TIMEOUT_US	1000	/* usecs */
 
+#define BCM_NS_USB3_PHY_BASE_ADDR_REG	0x1f
+#define BCM_NS_USB3_PHY_PLL30_BLOCK	0x8000
+#define BCM_NS_USB3_PHY_TX_PMD_BLOCK	0x8040
+#define BCM_NS_USB3_PHY_PIPE_BLOCK	0x8060
+
+/* Registers of PLL30 block */
+#define BCM_NS_USB3_PLL_CONTROL		0x01
+#define BCM_NS_USB3_PLLA_CONTROL0	0x0a
+#define BCM_NS_USB3_PLLA_CONTROL1	0x0b
+
+/* Registers of TX PMD block */
+#define BCM_NS_USB3_TX_PMD_CONTROL1	0x01
+
+/* Registers of PIPE block */
+#define BCM_NS_USB3_LFPS_CMP		0x02
+#define BCM_NS_USB3_LFPS_DEGLITCH	0x03
+
 enum bcm_ns_family {
 	BCM_NS_UNKNOWN,
 	BCM_NS_AX,
@@ -76,8 +94,10 @@ static inline int bcm_ns_usb3_mii_mng_wa
 				    usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
 }
 
-static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value)
+static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
+				      u16 value)
 {
+	u32 tmp = 0;
 	int err;
 
 	err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
@@ -86,7 +106,11 @@ static int bcm_ns_usb3_mii_mng_write32(s
 		return err;
 	}
 
-	writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
+	/* TODO: Use a proper MDIO bus layer */
+	tmp |= 0x58020000; /* Magic value for MDIO PHY write */
+	tmp |= reg << 18;
+	tmp |= value;
+	writel(tmp, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
 
 	return 0;
 }
@@ -102,21 +126,22 @@ static int bcm_ns_usb3_phy_init_ns_bx(st
 	udelay(2);
 
 	/* USB3 PLL Block */
-	err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
+	err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
+					 BCM_NS_USB3_PHY_PLL30_BLOCK);
 	if (err < 0)
 		return err;
 
 	/* Assert Ana_Pllseq start */
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000);
+	bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x1000);
 
 	/* Assert CML Divider ratio to 26 */
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
+	bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400);
 
 	/* Asserting PLL Reset */
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000);
+	bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0xc000);
 
 	/* Deaaserting PLL Reset */
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000);
+	bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0x8000);
 
 	/* Waiting MII Mgt interface idle */
 	bcm_ns_usb3_mii_mng_wait_idle(usb3);
@@ -125,22 +150,24 @@ static int bcm_ns_usb3_phy_init_ns_bx(st
 	writel(0, usb3->dmp + BCMA_RESET_CTL);
 
 	/* PLL frequency monitor enable */
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000);
+	bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x9000);
 
 	/* PIPE Block */
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060);
+	bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
+				   BCM_NS_USB3_PHY_PIPE_BLOCK);
 
 	/* CMPMAX & CMPMINTH setting */
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d);
+	bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_CMP, 0xf30d);
 
 	/* DEGLITCH MIN & MAX setting */
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302);
+	bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_DEGLITCH, 0x6302);
 
 	/* TXPMD block */
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
+	bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
+				   BCM_NS_USB3_PHY_TX_PMD_BLOCK);
 
 	/* Enabling SSC */
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
+	bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003);
 
 	/* Waiting MII Mgt interface idle */
 	bcm_ns_usb3_mii_mng_wait_idle(usb3);
@@ -159,22 +186,24 @@ static int bcm_ns_usb3_phy_init_ns_ax(st
 	udelay(2);
 
 	/* PLL30 block */
-	err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
+	err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
+					 BCM_NS_USB3_PHY_PLL30_BLOCK);
 	if (err < 0)
 		return err;
 
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
+	bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400);
 
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0);
+	bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 0x80e0);
 
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c);
+	bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x009c);
 
 	/* Enable SSC */
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
+	bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
+				   BCM_NS_USB3_PHY_TX_PMD_BLOCK);
 
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3);
+	bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x21d3);
 
-	bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
+	bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003);
 
 	/* Waiting MII Mgt interface idle */
 	bcm_ns_usb3_mii_mng_wait_idle(usb3);