summaryrefslogtreecommitdiff
path: root/target/linux/generic/patches-2.6.37/020-ssb_update.patch
blob: b71b67598e46dec86583b7014a6d09d42bbf69b5 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -3,7 +3,7 @@
  * Subsystem core
  *
  * Copyright 2005, Broadcom Corporation
- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
@@ -12,6 +12,7 @@
 
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_regs.h>
 #include <linux/ssb/ssb_driver_gige.h>
@@ -383,6 +384,35 @@ static int ssb_device_uevent(struct devi
 			     ssb_dev->id.revision);
 }
 
+#define ssb_config_attr(attrib, field, format_string) \
+static ssize_t \
+attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
+}
+
+ssb_config_attr(core_num, core_index, "%u\n")
+ssb_config_attr(coreid, id.coreid, "0x%04x\n")
+ssb_config_attr(vendor, id.vendor, "0x%04x\n")
+ssb_config_attr(revision, id.revision, "%u\n")
+ssb_config_attr(irq, irq, "%u\n")
+static ssize_t
+name_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%s\n",
+		       ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
+}
+
+static struct device_attribute ssb_device_attrs[] = {
+	__ATTR_RO(name),
+	__ATTR_RO(core_num),
+	__ATTR_RO(coreid),
+	__ATTR_RO(vendor),
+	__ATTR_RO(revision),
+	__ATTR_RO(irq),
+	__ATTR_NULL,
+};
+
 static struct bus_type ssb_bustype = {
 	.name		= "ssb",
 	.match		= ssb_bus_match,
@@ -392,6 +422,7 @@ static struct bus_type ssb_bustype = {
 	.suspend	= ssb_device_suspend,
 	.resume		= ssb_device_resume,
 	.uevent		= ssb_device_uevent,
+	.dev_attrs	= ssb_device_attrs,
 };
 
 static void ssb_buses_lock(void)
@@ -527,7 +558,7 @@ error:
 }
 
 /* Needs ssb_buses_lock() */
-static int ssb_attach_queued_buses(void)
+static int __devinit ssb_attach_queued_buses(void)
 {
 	struct ssb_bus *bus, *n;
 	int err = 0;
@@ -738,9 +769,9 @@ out:
 	return err;
 }
 
-static int ssb_bus_register(struct ssb_bus *bus,
-			    ssb_invariants_func_t get_invariants,
-			    unsigned long baseaddr)
+static int __devinit ssb_bus_register(struct ssb_bus *bus,
+				      ssb_invariants_func_t get_invariants,
+				      unsigned long baseaddr)
 {
 	int err;
 
@@ -821,8 +852,8 @@ err_disable_xtal:
 }
 
 #ifdef CONFIG_SSB_PCIHOST
-int ssb_bus_pcibus_register(struct ssb_bus *bus,
-			    struct pci_dev *host_pci)
+int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus,
+				      struct pci_dev *host_pci)
 {
 	int err;
 
@@ -845,9 +876,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
 #endif /* CONFIG_SSB_PCIHOST */
 
 #ifdef CONFIG_SSB_PCMCIAHOST
-int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
-			       struct pcmcia_device *pcmcia_dev,
-			       unsigned long baseaddr)
+int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus,
+					 struct pcmcia_device *pcmcia_dev,
+					 unsigned long baseaddr)
 {
 	int err;
 
@@ -867,8 +898,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register
 #endif /* CONFIG_SSB_PCMCIAHOST */
 
 #ifdef CONFIG_SSB_SDIOHOST
-int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
-			     unsigned int quirks)
+int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus,
+				       struct sdio_func *func,
+				       unsigned int quirks)
 {
 	int err;
 
@@ -888,9 +920,9 @@ int ssb_bus_sdiobus_register(struct ssb_
 EXPORT_SYMBOL(ssb_bus_sdiobus_register);
 #endif /* CONFIG_SSB_PCMCIAHOST */
 
-int ssb_bus_ssbbus_register(struct ssb_bus *bus,
-			    unsigned long baseaddr,
-			    ssb_invariants_func_t get_invariants)
+int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus,
+				      unsigned long baseaddr,
+				      ssb_invariants_func_t get_invariants)
 {
 	int err;
 
@@ -971,8 +1003,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
 	switch (plltype) {
 	case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
 		if (m & SSB_CHIPCO_CLK_T6_MMASK)
-			return SSB_CHIPCO_CLK_T6_M0;
-		return SSB_CHIPCO_CLK_T6_M1;
+			return SSB_CHIPCO_CLK_T6_M1;
+		return SSB_CHIPCO_CLK_T6_M0;
 	case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
 	case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 	case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
@@ -1087,23 +1119,22 @@ static u32 ssb_tmslow_reject_bitmask(str
 {
 	u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
 
-	/* The REJECT bit changed position in TMSLOW between
-	 * Backplane revisions. */
+	/* The REJECT bit seems to be different for Backplane rev 2.3 */
 	switch (rev) {
 	case SSB_IDLOW_SSBREV_22:
-		return SSB_TMSLOW_REJECT_22;
+	case SSB_IDLOW_SSBREV_24:
+	case SSB_IDLOW_SSBREV_26:
+		return SSB_TMSLOW_REJECT;
 	case SSB_IDLOW_SSBREV_23:
 		return SSB_TMSLOW_REJECT_23;
-	case SSB_IDLOW_SSBREV_24:     /* TODO - find the proper REJECT bits */
-	case SSB_IDLOW_SSBREV_25:     /* same here */
-	case SSB_IDLOW_SSBREV_26:     /* same here */
+	case SSB_IDLOW_SSBREV_25:     /* TODO - find the proper REJECT bit */
 	case SSB_IDLOW_SSBREV_27:     /* same here */
-		return SSB_TMSLOW_REJECT_23;	/* this is a guess */
+		return SSB_TMSLOW_REJECT;	/* this is a guess */
 	default:
 		printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
 		WARN_ON(1);
 	}
-	return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
+	return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
 }
 
 int ssb_device_is_enabled(struct ssb_device *dev)
@@ -1162,10 +1193,10 @@ void ssb_device_enable(struct ssb_device
 }
 EXPORT_SYMBOL(ssb_device_enable);
 
-/* Wait for a bit in a register to get set or unset.
+/* Wait for bitmask in a register to get set or cleared.
  * timeout is in units of ten-microseconds */
-static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
-			int timeout, int set)
+static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
+			 int timeout, int set)
 {
 	int i;
 	u32 val;
@@ -1173,7 +1204,7 @@ static int ssb_wait_bit(struct ssb_devic
 	for (i = 0; i < timeout; i++) {
 		val = ssb_read32(dev, reg);
 		if (set) {
-			if (val & bitmask)
+			if ((val & bitmask) == bitmask)
 				return 0;
 		} else {
 			if (!(val & bitmask))
@@ -1190,20 +1221,38 @@ static int ssb_wait_bit(struct ssb_devic
 
 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
 {
-	u32 reject;
+	u32 reject, val;
 
 	if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
 		return;
 
 	reject = ssb_tmslow_reject_bitmask(dev);
-	ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
-	ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
-	ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
-	ssb_write32(dev, SSB_TMSLOW,
-		    SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
-		    reject | SSB_TMSLOW_RESET |
-		    core_specific_flags);
-	ssb_flush_tmslow(dev);
+
+	if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) {
+		ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
+		ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1);
+		ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
+
+		if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
+			val = ssb_read32(dev, SSB_IMSTATE);
+			val |= SSB_IMSTATE_REJECT;
+			ssb_write32(dev, SSB_IMSTATE, val);
+			ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000,
+				      0);
+		}
+
+		ssb_write32(dev, SSB_TMSLOW,
+			SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
+			reject | SSB_TMSLOW_RESET |
+			core_specific_flags);
+		ssb_flush_tmslow(dev);
+
+		if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
+			val = ssb_read32(dev, SSB_IMSTATE);
+			val &= ~SSB_IMSTATE_REJECT;
+			ssb_write32(dev, SSB_IMSTATE, val);
+		}
+	}
 
 	ssb_write32(dev, SSB_TMSLOW,
 		    reject | SSB_TMSLOW_RESET |
@@ -1212,13 +1261,34 @@ void ssb_device_disable(struct ssb_devic
 }
 EXPORT_SYMBOL(ssb_device_disable);
 
+/* Some chipsets need routing known for PCIe and 64-bit DMA */
+static bool ssb_dma_translation_special_bit(struct ssb_device *dev)
+{
+	u16 chip_id = dev->bus->chip_id;
+
+	if (dev->id.coreid == SSB_DEV_80211) {
+		return (chip_id == 0x4322 || chip_id == 43221 ||
+			chip_id == 43231 || chip_id == 43222);
+	}
+
+	return 0;
+}
+
 u32 ssb_dma_translation(struct ssb_device *dev)
 {
 	switch (dev->bus->bustype) {
 	case SSB_BUSTYPE_SSB:
 		return 0;
 	case SSB_BUSTYPE_PCI:
-		return SSB_PCI_DMA;
+		if (pci_is_pcie(dev->bus->host_pci) &&
+		    ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) {
+			return SSB_PCIE_DMA_H32;
+		} else {
+			if (ssb_dma_translation_special_bit(dev))
+				return SSB_PCIE_DMA_H32;
+			else
+				return SSB_PCI_DMA;
+		}
 	default:
 		__ssb_dma_not_implemented(dev);
 	}
@@ -1261,20 +1331,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown);
 
 int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
 {
-	struct ssb_chipcommon *cc;
 	int err;
 	enum ssb_clkmode mode;
 
 	err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
 	if (err)
 		goto error;
-	cc = &bus->chipco;
-	mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
-	ssb_chipco_set_clockmode(cc, mode);
 
 #ifdef CONFIG_SSB_DEBUG
 	bus->powered_up = 1;
 #endif
+
+	mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
+	ssb_chipco_set_clockmode(&bus->chipco, mode);
+
 	return 0;
 error:
 	ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
@@ -1282,6 +1352,37 @@ error:
 }
 EXPORT_SYMBOL(ssb_bus_powerup);
 
+static void ssb_broadcast_value(struct ssb_device *dev,
+				u32 address, u32 data)
+{
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+	/* This is used for both, PCI and ChipCommon core, so be careful. */
+	BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
+	BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
+#endif
+
+	ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address);
+	ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */
+	ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data);
+	ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */
+}
+
+void ssb_commit_settings(struct ssb_bus *bus)
+{
+	struct ssb_device *dev;
+
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+	dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
+#else
+	dev = bus->chipco.dev;
+#endif
+	if (WARN_ON(!dev))
+		return;
+	/* This forces an update of the cached registers. */
+	ssb_broadcast_value(dev, 0xFD8, 0);
+}
+EXPORT_SYMBOL(ssb_commit_settings);
+
 u32 ssb_admatch_base(u32 adm)
 {
 	u32 base = 0;
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -1,7 +1,7 @@
 /*
  * Sonics Silicon Backplane PCI-Hostbus related functions.
  *
- * Copyright (C) 2005-2006 Michael Buesch <mb@bu3sch.de>
+ * Copyright (C) 2005-2006 Michael Buesch <m@bues.ch>
  * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
  * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
  * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
@@ -406,6 +406,46 @@ static void sprom_extract_r123(struct ss
 	out->antenna_gain.ghz5.a3 = gain;
 }
 
+/* Revs 4 5 and 8 have partially shared layout */
+static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
+{
+	SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
+	     SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
+	SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
+	     SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
+	SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
+	     SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
+	SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
+	     SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
+
+	SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
+	     SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
+	SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
+	     SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
+	SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
+	     SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
+	SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
+	     SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
+
+	SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
+	     SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
+	SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
+	     SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
+	SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
+	     SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
+	SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
+	     SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
+
+	SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
+	     SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
+	SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
+	     SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
+	SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
+	     SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
+	SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
+	     SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
+}
+
 static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
 {
 	int i;
@@ -428,10 +468,14 @@ static void sprom_extract_r45(struct ssb
 		SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
 		SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
 		SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
+		SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
+		SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
 	} else {
 		SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
 		SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
 		SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
+		SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
+		SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
 	}
 	SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
 	     SSB_SPROM4_ANTAVAIL_A_SHIFT);
@@ -471,6 +515,8 @@ static void sprom_extract_r45(struct ssb
 	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
 	       sizeof(out->antenna_gain.ghz5));
 
+	sprom_extract_r458(out, in);
+
 	/* TODO - get remaining rev 4 stuff needed */
 }
 
@@ -561,6 +607,31 @@ static void sprom_extract_r8(struct ssb_
 	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
 	       sizeof(out->antenna_gain.ghz5));
 
+	/* Extract FEM info */
+	SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+		SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
+	SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G,
+		SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
+	SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G,
+		SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
+	SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G,
+		SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
+	SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G,
+		SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
+
+	SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G,
+		SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
+	SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G,
+		SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
+	SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G,
+		SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
+	SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G,
+		SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
+	SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
+		SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
+
+	sprom_extract_r458(out, in);
+
 	/* TODO - get remaining rev 8 stuff needed */
 }
 
@@ -573,37 +644,34 @@ static int sprom_extract(struct ssb_bus
 	ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
 	memset(out->et0mac, 0xFF, 6);		/* preset et0 and et1 mac */
 	memset(out->et1mac, 0xFF, 6);
+
 	if ((bus->chip_id & 0xFF00) == 0x4400) {
 		/* Workaround: The BCM44XX chip has a stupid revision
 		 * number stored in the SPROM.
 		 * Always extract r1. */
 		out->revision = 1;
+		ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
+	}
+
+	switch (out->revision) {
+	case 1:
+	case 2:
+	case 3:
 		sprom_extract_r123(out, in);
-	} else if (bus->chip_id == 0x4321) {
-		/* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */
-		out->revision = 4;
+		break;
+	case 4:
+	case 5:
 		sprom_extract_r45(out, in);
-	} else {
-		switch (out->revision) {
-		case 1:
-		case 2:
-		case 3:
-			sprom_extract_r123(out, in);
-			break;
-		case 4:
-		case 5:
-			sprom_extract_r45(out, in);
-			break;
-		case 8:
-			sprom_extract_r8(out, in);
-			break;
-		default:
-			ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
-				   "  revision %d detected. Will extract"
-				   " v1\n", out->revision);
-			out->revision = 1;
-			sprom_extract_r123(out, in);
-		}
+		break;
+	case 8:
+		sprom_extract_r8(out, in);
+		break;
+	default:
+		ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+			   " revision %d detected. Will extract"
+			   " v1\n", out->revision);
+		out->revision = 1;
+		sprom_extract_r123(out, in);
 	}
 
 	if (out->boardflags_lo == 0xFFFF)
@@ -617,15 +685,14 @@ static int sprom_extract(struct ssb_bus
 static int ssb_pci_sprom_get(struct ssb_bus *bus,
 			     struct ssb_sprom *sprom)
 {
-	const struct ssb_sprom *fallback;
-	int err = -ENOMEM;
+	int err;
 	u16 *buf;
 
 	if (!ssb_is_sprom_available(bus)) {
 		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
 		return -ENODEV;
 	}
-	if (bus->chipco.dev) {	/* can be unavailible! */
+	if (bus->chipco.dev) {	/* can be unavailable! */
 		/*
 		 * get SPROM offset: SSB_SPROM_BASE1 except for
 		 * chipcommon rev >= 31 or chip ID is 0x4312 and
@@ -645,7 +712,7 @@ static int ssb_pci_sprom_get(struct ssb_
 
 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
 	if (!buf)
-		goto out;
+		return -ENOMEM;
 	bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
 	sprom_do_read(bus, buf);
 	err = sprom_check_crc(buf, bus->sprom_size);
@@ -655,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_
 		buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
 			      GFP_KERNEL);
 		if (!buf)
-			goto out;
+			return -ENOMEM;
 		bus->sprom_size = SSB_SPROMSIZE_WORDS_R4;
 		sprom_do_read(bus, buf);
 		err = sprom_check_crc(buf, bus->sprom_size);
 		if (err) {
 			/* All CRC attempts failed.
 			 * Maybe there is no SPROM on the device?
-			 * If we have a fallback, use that. */
-			fallback = ssb_get_fallback_sprom();
-			if (fallback) {
-				memcpy(sprom, fallback, sizeof(*sprom));
+			 * Now we ask the arch code if there is some sprom
+			 * available for this device in some other storage */
+			err = ssb_fill_sprom_with_fallback(bus, sprom);
+			if (err) {
+				ssb_printk(KERN_WARNING PFX "WARNING: Using"
+					   " fallback SPROM failed (err %d)\n",
+					   err);
+			} else {
+				ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+					    " revision %d provided by"
+					    " platform.\n", sprom->revision);
 				err = 0;
 				goto out_free;
 			}
@@ -677,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_
 
 out_free:
 	kfree(buf);
-out:
 	return err;
 }
 
 static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
 				  struct ssb_boardinfo *bi)
 {
-	pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID,
-			     &bi->vendor);
-	pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID,
-			     &bi->type);
-	pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
-			     &bi->rev);
+	bi->vendor = bus->host_pci->subsystem_vendor;
+	bi->type = bus->host_pci->subsystem_device;
+	bi->rev = bus->host_pci->revision;
 }
 
 int ssb_pci_get_invariants(struct ssb_bus *bus,
--- a/drivers/ssb/pcihost_wrapper.c
+++ b/drivers/ssb/pcihost_wrapper.c
@@ -6,7 +6,7 @@
  * Copyright (c) 2005 Stefano Brivio <st3@riseup.net>
  * Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
  * Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
- * Copyright (c) 2005-2007 Michael Buesch <mbuesch@freenet.de>
+ * Copyright (c) 2005-2007 Michael Buesch <m@bues.ch>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
@@ -53,12 +53,13 @@ static int ssb_pcihost_resume(struct pci
 # define ssb_pcihost_resume	NULL
 #endif /* CONFIG_PM */
 
-static int ssb_pcihost_probe(struct pci_dev *dev,
-			     const struct pci_device_id *id)
+static int __devinit ssb_pcihost_probe(struct pci_dev *dev,
+				       const struct pci_device_id *id)
 {
 	struct ssb_bus *ssb;
 	int err = -ENOMEM;
 	const char *name;
+	u32 val;
 
 	ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
 	if (!ssb)
@@ -74,6 +75,12 @@ static int ssb_pcihost_probe(struct pci_
 		goto err_pci_disable;
 	pci_set_master(dev);
 
+	/* Disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state */
+	pci_read_config_dword(dev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
+
 	err = ssb_bus_pcibus_register(ssb, dev);
 	if (err)
 		goto err_pci_release_regions;
@@ -103,7 +110,7 @@ static void ssb_pcihost_remove(struct pc
 	pci_set_drvdata(dev, NULL);
 }
 
-int ssb_pcihost_register(struct pci_driver *driver)
+int __devinit ssb_pcihost_register(struct pci_driver *driver)
 {
 	driver->probe = ssb_pcihost_probe;
 	driver->remove = ssb_pcihost_remove;
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -2,7 +2,7 @@
  * Sonics Silicon Backplane
  * Bus scanning
  *
- * Copyright (C) 2005-2007 Michael Buesch <mb@bu3sch.de>
+ * Copyright (C) 2005-2007 Michael Buesch <m@bues.ch>
  * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
  * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
  * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
@@ -258,7 +258,10 @@ static int we_support_multiple_80211_cor
 #ifdef CONFIG_SSB_PCIHOST
 	if (bus->bustype == SSB_BUSTYPE_PCI) {
 		if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
-		    bus->host_pci->device == 0x4324)
+		    ((bus->host_pci->device == 0x4313) ||
+		     (bus->host_pci->device == 0x431A) ||
+		     (bus->host_pci->device == 0x4321) ||
+		     (bus->host_pci->device == 0x4324)))
 			return 1;
 	}
 #endif /* CONFIG_SSB_PCIHOST */
@@ -307,8 +310,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
 	} else {
 		if (bus->bustype == SSB_BUSTYPE_PCI) {
 			bus->chip_id = pcidev_to_chipid(bus->host_pci);
-			pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
-					     &bus->chip_rev);
+			bus->chip_rev = bus->host_pci->revision;
 			bus->chip_package = 0;
 		} else {
 			bus->chip_id = 0x4710;
@@ -405,10 +407,10 @@ int ssb_bus_scan(struct ssb_bus *bus,
 				/* Ignore PCI cores on PCI-E cards.
 				 * Ignore PCI-E cores on PCI cards. */
 				if (dev->id.coreid == SSB_DEV_PCI) {
-					if (bus->host_pci->is_pcie)
+					if (pci_is_pcie(bus->host_pci))
 						continue;
 				} else {
-					if (!bus->host_pci->is_pcie)
+					if (!pci_is_pcie(bus->host_pci))
 						continue;
 				}
 			}
@@ -420,6 +422,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
 			bus->pcicore.dev = dev;
 #endif /* CONFIG_SSB_DRIVER_PCICORE */
 			break;
+		case SSB_DEV_ETHERNET:
+			if (bus->bustype == SSB_BUSTYPE_PCI) {
+				if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
+				    (bus->host_pci->device & 0xFF00) == 0x4300) {
+					/* This is a dangling ethernet core on a
+					 * wireless device. Ignore it. */
+					continue;
+				}
+			}
+			break;
 		default:
 			break;
 		}
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -25,8 +25,10 @@ struct ssb_sprom {
 	u8 et1phyaddr;		/* MII address for enet1 */
 	u8 et0mdcport;		/* MDIO for enet0 */
 	u8 et1mdcport;		/* MDIO for enet1 */
-	u8 board_rev;		/* Board revision number from SPROM. */
+	u16 board_rev;		/* Board revision number from SPROM. */
 	u8 country_code;	/* Country Code */
+	u16 leddc_on_time;	/* LED Powersave Duty Cycle On Count */
+	u16 leddc_off_time;	/* LED Powersave Duty Cycle Off Count */
 	u8 ant_available_a;	/* 2GHz antenna available bits (up to 4) */
 	u8 ant_available_bg;	/* 5GHz antenna available bits (up to 4) */
 	u16 pa0b0;
@@ -55,6 +57,10 @@ struct ssb_sprom {
 	u8 tri5gl;		/* 5.2GHz TX isolation */
 	u8 tri5g;		/* 5.3GHz TX isolation */
 	u8 tri5gh;		/* 5.8GHz TX isolation */
+	u8 txpid2g[4];		/* 2GHz TX power index */
+	u8 txpid5gl[4];		/* 4.9 - 5.1GHz TX power index */
+	u8 txpid5g[4];		/* 5.1 - 5.5GHz TX power index */
+	u8 txpid5gh[4];		/* 5.5 - ...GHz TX power index */
 	u8 rxpo2g;		/* 2GHz RX power offset */
 	u8 rxpo5g;		/* 5GHz RX power offset */
 	u8 rssisav2g;		/* 2GHz RSSI params */
@@ -88,6 +94,15 @@ struct ssb_sprom {
 		} ghz5;		/* 5GHz band */
 	} antenna_gain;
 
+	struct {
+		struct {
+			u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
+		} ghz2;
+		struct {
+			u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
+		} ghz5;
+	} fem;
+
 	/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
 };
 
@@ -95,7 +110,7 @@ struct ssb_sprom {
 struct ssb_boardinfo {
 	u16 vendor;
 	u16 type;
-	u16 rev;
+	u8  rev;
 };
 
 
@@ -225,10 +240,9 @@ struct ssb_driver {
 #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
 
 extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
-static inline int ssb_driver_register(struct ssb_driver *drv)
-{
-	return __ssb_driver_register(drv, THIS_MODULE);
-}
+#define ssb_driver_register(drv) \
+	__ssb_driver_register(drv, THIS_MODULE)
+
 extern void ssb_driver_unregister(struct ssb_driver *drv);
 
 
@@ -304,7 +318,7 @@ struct ssb_bus {
 
 	/* ID information about the Chip. */
 	u16 chip_id;
-	u16 chip_rev;
+	u8 chip_rev;
 	u16 sprom_offset;
 	u16 sprom_size;		/* number of words in sprom */
 	u8 chip_package;
@@ -400,7 +414,9 @@ extern bool ssb_is_sprom_available(struc
 
 /* Set a fallback SPROM.
  * See kdoc at the function definition for complete documentation. */
-extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
+extern int ssb_arch_register_fallback_sprom(
+		int (*sprom_callback)(struct ssb_bus *bus,
+		struct ssb_sprom *out));
 
 /* Suspend a SSB bus.
  * Call this from the parent bus suspend routine. */
@@ -514,6 +530,7 @@ extern int ssb_bus_may_powerdown(struct
  * Otherwise static always-on powercontrol will be used. */
 extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
 
+extern void ssb_commit_settings(struct ssb_bus *bus);
 
 /* Various helper functions */
 extern u32 ssb_admatch_base(u32 adm);
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -85,6 +85,8 @@
 #define  SSB_IMSTATE_AP_RSV	0x00000030 /* Reserved */
 #define  SSB_IMSTATE_IBE	0x00020000 /* In Band Error */
 #define  SSB_IMSTATE_TO		0x00040000 /* Timeout */
+#define  SSB_IMSTATE_BUSY	0x01800000 /* Busy (Backplane rev >= 2.3 only) */
+#define  SSB_IMSTATE_REJECT	0x02000000 /* Reject (Backplane rev >= 2.3 only) */
 #define SSB_INTVEC		0x0F94     /* SB Interrupt Mask */
 #define  SSB_INTVEC_PCI		0x00000001 /* Enable interrupts for PCI */
 #define  SSB_INTVEC_ENET0	0x00000002 /* Enable interrupts for enet 0 */
@@ -95,9 +97,8 @@
 #define  SSB_INTVEC_ENET1	0x00000040 /* Enable interrupts for enet 1 */
 #define SSB_TMSLOW		0x0F98     /* SB Target State Low */
 #define  SSB_TMSLOW_RESET	0x00000001 /* Reset */
-#define  SSB_TMSLOW_REJECT_22	0x00000002 /* Reject (Backplane rev 2.2) */
+#define  SSB_TMSLOW_REJECT	0x00000002 /* Reject (Standard Backplane) */
 #define  SSB_TMSLOW_REJECT_23	0x00000004 /* Reject (Backplane rev 2.3) */
-#define  SSB_TMSLOW_PHYCLK	0x00000010 /* MAC PHY Clock Control Enable */
 #define  SSB_TMSLOW_CLOCK	0x00010000 /* Clock Enable */
 #define  SSB_TMSLOW_FGC		0x00020000 /* Force Gated Clocks On */
 #define  SSB_TMSLOW_PE		0x40000000 /* Power Management Enable */
@@ -268,6 +269,8 @@
 /* SPROM Revision 4 */
 #define SSB_SPROM4_BFLLO		0x0044	/* Boardflags (low 16 bits) */
 #define SSB_SPROM4_BFLHI		0x0046  /* Board Flags Hi */
+#define SSB_SPROM4_BFL2LO		0x0048	/* Board flags 2 (low 16 bits) */
+#define SSB_SPROM4_BFL2HI		0x004A	/* Board flags 2 Hi */
 #define SSB_SPROM4_IL0MAC		0x004C	/* 6 byte MAC address for a/b/g/n */
 #define SSB_SPROM4_CCODE		0x0052	/* Country Code (2 bytes) */
 #define SSB_SPROM4_GPIOA		0x0056	/* Gen. Purpose IO # 0 and 1 */
@@ -299,6 +302,46 @@
 #define  SSB_SPROM4_AGAIN2_SHIFT	0
 #define  SSB_SPROM4_AGAIN3		0xFF00	/* Antenna 3 */
 #define  SSB_SPROM4_AGAIN3_SHIFT	8
+#define SSB_SPROM4_TXPID2G01		0x0062 	/* TX Power Index 2GHz */
+#define  SSB_SPROM4_TXPID2G0		0x00FF
+#define  SSB_SPROM4_TXPID2G0_SHIFT	0
+#define  SSB_SPROM4_TXPID2G1		0xFF00
+#define  SSB_SPROM4_TXPID2G1_SHIFT	8
+#define SSB_SPROM4_TXPID2G23		0x0064 	/* TX Power Index 2GHz */
+#define  SSB_SPROM4_TXPID2G2		0x00FF
+#define  SSB_SPROM4_TXPID2G2_SHIFT	0
+#define  SSB_SPROM4_TXPID2G3		0xFF00
+#define  SSB_SPROM4_TXPID2G3_SHIFT	8
+#define SSB_SPROM4_TXPID5G01		0x0066 	/* TX Power Index 5GHz middle subband */
+#define  SSB_SPROM4_TXPID5G0		0x00FF
+#define  SSB_SPROM4_TXPID5G0_SHIFT	0
+#define  SSB_SPROM4_TXPID5G1		0xFF00
+#define  SSB_SPROM4_TXPID5G1_SHIFT	8
+#define SSB_SPROM4_TXPID5G23		0x0068 	/* TX Power Index 5GHz middle subband */
+#define  SSB_SPROM4_TXPID5G2		0x00FF
+#define  SSB_SPROM4_TXPID5G2_SHIFT	0
+#define  SSB_SPROM4_TXPID5G3		0xFF00
+#define  SSB_SPROM4_TXPID5G3_SHIFT	8
+#define SSB_SPROM4_TXPID5GL01		0x006A 	/* TX Power Index 5GHz low subband */
+#define  SSB_SPROM4_TXPID5GL0		0x00FF
+#define  SSB_SPROM4_TXPID5GL0_SHIFT	0
+#define  SSB_SPROM4_TXPID5GL1		0xFF00
+#define  SSB_SPROM4_TXPID5GL1_SHIFT	8
+#define SSB_SPROM4_TXPID5GL23		0x006C 	/* TX Power Index 5GHz low subband */
+#define  SSB_SPROM4_TXPID5GL2		0x00FF
+#define  SSB_SPROM4_TXPID5GL2_SHIFT	0
+#define  SSB_SPROM4_TXPID5GL3		0xFF00
+#define  SSB_SPROM4_TXPID5GL3_SHIFT	8
+#define SSB_SPROM4_TXPID5GH01		0x006E 	/* TX Power Index 5GHz high subband */
+#define  SSB_SPROM4_TXPID5GH0		0x00FF
+#define  SSB_SPROM4_TXPID5GH0_SHIFT	0
+#define  SSB_SPROM4_TXPID5GH1		0xFF00
+#define  SSB_SPROM4_TXPID5GH1_SHIFT	8
+#define SSB_SPROM4_TXPID5GH23		0x0070 	/* TX Power Index 5GHz high subband */
+#define  SSB_SPROM4_TXPID5GH2		0x00FF
+#define  SSB_SPROM4_TXPID5GH2_SHIFT	0
+#define  SSB_SPROM4_TXPID5GH3		0xFF00
+#define  SSB_SPROM4_TXPID5GH3_SHIFT	8
 #define SSB_SPROM4_MAXP_BG		0x0080  /* Max Power BG in path 1 */
 #define  SSB_SPROM4_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
 #define  SSB_SPROM4_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
@@ -318,6 +361,8 @@
 #define SSB_SPROM5_CCODE		0x0044	/* Country Code (2 bytes) */
 #define SSB_SPROM5_BFLLO		0x004A	/* Boardflags (low 16 bits) */
 #define SSB_SPROM5_BFLHI		0x004C  /* Board Flags Hi */
+#define SSB_SPROM5_BFL2LO		0x004E	/* Board flags 2 (low 16 bits) */
+#define SSB_SPROM5_BFL2HI		0x0050	/* Board flags 2 Hi */
 #define SSB_SPROM5_IL0MAC		0x0052	/* 6 byte MAC address for a/b/g/n */
 #define SSB_SPROM5_GPIOA		0x0076	/* Gen. Purpose IO # 0 and 1 */
 #define  SSB_SPROM5_GPIOA_P0		0x00FF	/* Pin 0 */
@@ -387,6 +432,23 @@
 #define  SSB_SPROM8_RXPO2G		0x00FF	/* 2GHz RX power offset */
 #define  SSB_SPROM8_RXPO5G		0xFF00	/* 5GHz RX power offset */
 #define  SSB_SPROM8_RXPO5G_SHIFT	8
+#define SSB_SPROM8_FEM2G		0x00AE
+#define SSB_SPROM8_FEM5G		0x00B0
+#define  SSB_SROM8_FEM_TSSIPOS		0x0001
+#define  SSB_SROM8_FEM_TSSIPOS_SHIFT	0
+#define  SSB_SROM8_FEM_EXTPA_GAIN	0x0006
+#define  SSB_SROM8_FEM_EXTPA_GAIN_SHIFT	1
+#define  SSB_SROM8_FEM_PDET_RANGE	0x00F8
+#define  SSB_SROM8_FEM_PDET_RANGE_SHIFT	3
+#define  SSB_SROM8_FEM_TR_ISO		0x0700
+#define  SSB_SROM8_FEM_TR_ISO_SHIFT	8
+#define  SSB_SROM8_FEM_ANTSWLUT		0xF800
+#define  SSB_SROM8_FEM_ANTSWLUT_SHIFT	11
+#define SSB_SPROM8_THERMAL		0x00B2
+#define SSB_SPROM8_MPWR_RAWTS		0x00B4
+#define SSB_SPROM8_TS_SLP_OPT_CORRX	0x00B6
+#define SSB_SPROM8_FOC_HWIQ_IQSWP	0x00B8
+#define SSB_SPROM8_PHYCAL_TEMPDELTA	0x00BA
 #define SSB_SPROM8_MAXP_BG		0x00C0  /* Max Power 2GHz in path 1 */
 #define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power 2GHz */
 #define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
@@ -417,6 +479,46 @@
 #define SSB_SPROM8_OFDM5GLPO		0x014A	/* 5.2GHz OFDM power offset */
 #define SSB_SPROM8_OFDM5GHPO		0x014E	/* 5.8GHz OFDM power offset */
 
+/* Values for boardflags_lo read from SPROM */
+#define SSB_BFL_BTCOEXIST		0x0001	/* implements Bluetooth coexistance */
+#define SSB_BFL_PACTRL			0x0002	/* GPIO 9 controlling the PA */
+#define SSB_BFL_AIRLINEMODE		0x0004	/* implements GPIO 13 radio disable indication */
+#define SSB_BFL_RSSI			0x0008	/* software calculates nrssi slope. */
+#define SSB_BFL_ENETSPI			0x0010	/* has ephy roboswitch spi */
+#define SSB_BFL_XTAL_NOSLOW		0x0020	/* no slow clock available */
+#define SSB_BFL_CCKHIPWR		0x0040	/* can do high power CCK transmission */
+#define SSB_BFL_ENETADM			0x0080	/* has ADMtek switch */
+#define SSB_BFL_ENETVLAN		0x0100	/* can do vlan */
+#define SSB_BFL_AFTERBURNER		0x0200	/* supports Afterburner mode */
+#define SSB_BFL_NOPCI			0x0400	/* board leaves PCI floating */
+#define SSB_BFL_FEM			0x0800	/* supports the Front End Module */
+#define SSB_BFL_EXTLNA			0x1000	/* has an external LNA */
+#define SSB_BFL_HGPA			0x2000	/* had high gain PA */
+#define SSB_BFL_BTCMOD			0x4000	/* BFL_BTCOEXIST is given in alternate GPIOs */
+#define SSB_BFL_ALTIQ			0x8000	/* alternate I/Q settings */
+
+/* Values for boardflags_hi read from SPROM */
+#define SSB_BFH_NOPA			0x0001	/* has no PA */
+#define SSB_BFH_RSSIINV			0x0002	/* RSSI uses positive slope (not TSSI) */
+#define SSB_BFH_PAREF			0x0004	/* uses the PARef LDO */
+#define SSB_BFH_3TSWITCH		0x0008	/* uses a triple throw switch shared with bluetooth */
+#define SSB_BFH_PHASESHIFT		0x0010	/* can support phase shifter */
+#define SSB_BFH_BUCKBOOST		0x0020	/* has buck/booster */
+#define SSB_BFH_FEM_BT			0x0040	/* has FEM and switch to share antenna with bluetooth */
+
+/* Values for boardflags2_lo read from SPROM */
+#define SSB_BFL2_RXBB_INT_REG_DIS	0x0001	/* external RX BB regulator present */
+#define SSB_BFL2_APLL_WAR		0x0002	/* alternative A-band PLL settings implemented */
+#define SSB_BFL2_TXPWRCTRL_EN 		0x0004	/* permits enabling TX Power Control */
+#define SSB_BFL2_2X4_DIV		0x0008	/* 2x4 diversity switch */
+#define SSB_BFL2_5G_PWRGAIN		0x0010	/* supports 5G band power gain */
+#define SSB_BFL2_PCIEWAR_OVR		0x0020	/* overrides ASPM and Clkreq settings */
+#define SSB_BFL2_CAESERS_BRD		0x0040	/* is Caesers board (unused) */
+#define SSB_BFL2_BTC3WIRE		0x0080	/* used 3-wire bluetooth coexist */
+#define SSB_BFL2_SKWRKFEM_BRD		0x0100	/* 4321mcm93 uses Skyworks FEM */
+#define SSB_BFL2_SPUR_WAR		0x0200	/* has a workaround for clock-harmonic spurs */
+#define SSB_BFL2_GPLL_WAR		0x0400	/* altenative G-band PLL settings implemented */
+
 /* Values for SSB_SPROM1_BINF_CCODE */
 enum {
 	SSB_SPROM1CCODE_WORLD = 0,
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -3,7 +3,7 @@
  * Broadcom ChipCommon core driver
  *
  * Copyright 2005, Broadcom Corporation
- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
@@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb
 	if (!ccdev)
 		return;
 	bus = ccdev->bus;
+
+	/* We support SLOW only on 6..9 */
+	if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW)
+		mode = SSB_CLKMODE_DYNAMIC;
+
+	if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
+		return; /* PMU controls clockmode, separated function needed */
+	SSB_WARN_ON(ccdev->id.revision >= 20);
+
 	/* chipcommon cores prior to rev6 don't support dynamic clock control */
 	if (ccdev->id.revision < 6)
 		return;
-	/* chipcommon cores rev10 are a whole new ball game */
+
+	/* ChipCommon cores rev10+ need testing */
 	if (ccdev->id.revision >= 10)
 		return;
+
 	if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
 		return;
 
 	switch (mode) {
-	case SSB_CLKMODE_SLOW:
+	case SSB_CLKMODE_SLOW: /* For revs 6..9 only */
 		tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
 		tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
 		chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
 		break;
 	case SSB_CLKMODE_FAST:
-		ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
-		tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
-		tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
-		tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
-		chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+		if (ccdev->id.revision < 10) {
+			ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
+			tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+			tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+			tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
+			chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+		} else {
+			chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
+				(chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) |
+				 SSB_CHIPCO_SYSCLKCTL_FORCEHT));
+			/* udelay(150); TODO: not available in early init */
+		}
 		break;
 	case SSB_CLKMODE_DYNAMIC:
-		tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
-		tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
-		tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
-		tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
-		if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
-			tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
-		chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
-
-		/* for dynamic control, we have to release our xtal_pu "force on" */
-		if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
-			ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
+		if (ccdev->id.revision < 10) {
+			tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+			tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+			tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
+			tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+			if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) !=
+			    SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
+				tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+			chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+
+			/* For dynamic control, we have to release our xtal_pu
+			 * "force on" */
+			if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
+				ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
+		} else {
+			chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
+				(chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
+				 ~SSB_CHIPCO_SYSCLKCTL_FORCEHT));
+		}
 		break;
 	default:
 		SSB_WARN_ON(1);
@@ -260,6 +286,12 @@ void ssb_chipcommon_init(struct ssb_chip
 	if (cc->dev->id.revision >= 11)
 		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
 	ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
+
+	if (cc->dev->id.revision >= 20) {
+		chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
+		chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0);
+	}
+
 	ssb_pmu_init(cc);
 	chipco_powercontrol_init(cc);
 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -2,7 +2,7 @@
  * Sonics Silicon Backplane
  * Broadcom ChipCommon Power Management Unit driver
  *
- * Copyright 2009, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2009, Michael Buesch <m@bues.ch>
  * Copyright 2007, Broadcom Corporation
  *
  * Licensed under the GNU/GPL. See COPYING for details.
@@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struc
 	u32 min_msk = 0, max_msk = 0;
 	unsigned int i;
 	const struct pmu_res_updown_tab_entry *updown_tab = NULL;
-	unsigned int updown_tab_size;
+	unsigned int updown_tab_size = 0;
 	const struct pmu_res_depend_tab_entry *depend_tab = NULL;
-	unsigned int depend_tab_size;
+	unsigned int depend_tab_size = 0;
 
 	switch (bus->chip_id) {
 	case 0x4312:
+		 min_msk = 0xCBB;
+		 break;
 	case 0x4322:
 		/* We keep the default settings:
 		 * min_msk = 0xCBB
--- a/drivers/ssb/driver_gige.c
+++ b/drivers/ssb/driver_gige.c
@@ -3,7 +3,7 @@
  * Broadcom Gigabit Ethernet core driver
  *
  * Copyright 2008, Broadcom Corporation
- * Copyright 2008, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2008, Michael Buesch <m@bues.ch>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
@@ -106,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige
 	gige_write32(dev, SSB_GIGE_PCICFG + offset, value);
 }
 
-static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-				    int reg, int size, u32 *val)
+static int __devinit ssb_gige_pci_read_config(struct pci_bus *bus,
+					      unsigned int devfn, int reg,
+					      int size, u32 *val)
 {
 	struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
 	unsigned long flags;
@@ -136,8 +137,9 @@ static int ssb_gige_pci_read_config(stru
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-				     int reg, int size, u32 val)
+static int __devinit ssb_gige_pci_write_config(struct pci_bus *bus,
+					       unsigned int devfn, int reg,
+					       int size, u32 val)
 {
 	struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
 	unsigned long flags;
@@ -166,7 +168,8 @@ static int ssb_gige_pci_write_config(str
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
+static int __devinit ssb_gige_probe(struct ssb_device *sdev,
+				    const struct ssb_device_id *id)
 {
 	struct ssb_gige *dev;
 	u32 base, tmslow, tmshigh;
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -3,7 +3,7 @@
  * Broadcom PCI-core driver
  *
  * Copyright 2005, Broadcom Corporation
- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
@@ -15,6 +15,11 @@
 
 #include "ssb_private.h"
 
+static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address);
+static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data);
+static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address);
+static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
+				u8 address, u16 data);
 
 static inline
 u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
@@ -309,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st
 	return ssb_mips_irq(extpci_core->dev) + 2;
 }
 
-static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
+static void __devinit ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
 {
 	u32 val;
 
@@ -374,7 +379,7 @@ static void ssb_pcicore_init_hostmode(st
 	register_pci_controller(&ssb_pcicore_controller);
 }
 
-static int pcicore_is_in_hostmode(struct ssb_pcicore *pc)
+static int __devinit pcicore_is_in_hostmode(struct ssb_pcicore *pc)
 {
 	struct ssb_bus *bus = pc->dev->bus;
 	u16 chipid_top;
@@ -403,25 +408,137 @@ static int pcicore_is_in_hostmode(struct
 }
 #endif /* CONFIG_SSB_PCICORE_HOSTMODE */
 
+/**************************************************
+ * Workarounds.
+ **************************************************/
+
+static void __devinit ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc)
+{
+	u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0));
+	if (((tmp & 0xF000) >> 12) != pc->dev->core_index) {
+		tmp &= ~0xF000;
+		tmp |= (pc->dev->core_index << 12);
+		pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp);
+	}
+}
+
+static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc)
+{
+	return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
+}
+
+static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc)
+{
+	const u8 serdes_pll_device = 0x1D;
+	const u8 serdes_rx_device = 0x1F;
+	u16 tmp;
+
+	ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
+			    ssb_pcicore_polarity_workaround(pc));
+	tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
+	if (tmp & 0x4000)
+		ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
+}
+
+static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc)
+{
+	struct ssb_device *pdev = pc->dev;
+	struct ssb_bus *bus = pdev->bus;
+	u32 tmp;
+
+	tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
+	tmp |= SSB_PCICORE_SBTOPCI_PREF;
+	tmp |= SSB_PCICORE_SBTOPCI_BURST;
+	pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
+
+	if (pdev->id.revision < 5) {
+		tmp = ssb_read32(pdev, SSB_IMCFGLO);
+		tmp &= ~SSB_IMCFGLO_SERTO;
+		tmp |= 2;
+		tmp &= ~SSB_IMCFGLO_REQTO;
+		tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
+		ssb_write32(pdev, SSB_IMCFGLO, tmp);
+		ssb_commit_settings(bus);
+	} else if (pdev->id.revision >= 11) {
+		tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
+		tmp |= SSB_PCICORE_SBTOPCI_MRM;
+		pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
+	}
+}
+
+static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
+{
+	u32 tmp;
+	u8 rev = pc->dev->id.revision;
+
+	if (rev == 0 || rev == 1) {
+		/* TLP Workaround register. */
+		tmp = ssb_pcie_read(pc, 0x4);
+		tmp |= 0x8;
+		ssb_pcie_write(pc, 0x4, tmp);
+	}
+	if (rev == 1) {
+		/* DLLP Link Control register. */
+		tmp = ssb_pcie_read(pc, 0x100);
+		tmp |= 0x40;
+		ssb_pcie_write(pc, 0x100, tmp);
+	}
+
+	if (rev == 0) {
+		const u8 serdes_rx_device = 0x1F;
+
+		ssb_pcie_mdio_write(pc, serdes_rx_device,
+					2 /* Timer */, 0x8128);
+		ssb_pcie_mdio_write(pc, serdes_rx_device,
+					6 /* CDR */, 0x0100);
+		ssb_pcie_mdio_write(pc, serdes_rx_device,
+					7 /* CDR BW */, 0x1466);
+	} else if (rev == 3 || rev == 4 || rev == 5) {
+		/* TODO: DLLP Power Management Threshold */
+		ssb_pcicore_serdes_workaround(pc);
+		/* TODO: ASPM */
+	} else if (rev == 7) {
+		/* TODO: No PLL down */
+	}
+
+	if (rev >= 6) {
+		/* Miscellaneous Configuration Fixup */
+		tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5));
+		if (!(tmp & 0x8000))
+			pcicore_write16(pc, SSB_PCICORE_SPROM(5),
+					tmp | 0x8000);
+	}
+}
 
 /**************************************************
  * Generic and Clientmode operation code.
  **************************************************/
 
-static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
+static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
 {
+	struct ssb_device *pdev = pc->dev;
+	struct ssb_bus *bus = pdev->bus;
+
+	if (bus->bustype == SSB_BUSTYPE_PCI)
+		ssb_pcicore_fix_sprom_core_index(pc);
+
 	/* Disable PCI interrupts. */
-	ssb_write32(pc->dev, SSB_INTVEC, 0);
+	ssb_write32(pdev, SSB_INTVEC, 0);
+
+	/* Additional PCIe always once-executed workarounds */
+	if (pc->dev->id.coreid == SSB_DEV_PCIE) {
+		ssb_pcicore_serdes_workaround(pc);
+		/* TODO: ASPM */
+		/* TODO: Clock Request Update */
+	}
 }
 
-void ssb_pcicore_init(struct ssb_pcicore *pc)
+void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
 {
 	struct ssb_device *dev = pc->dev;
-	struct ssb_bus *bus;
 
 	if (!dev)
 		return;
-	bus = dev->bus;
 	if (!ssb_device_is_enabled(dev))
 		ssb_device_enable(dev, 0);
 
@@ -446,11 +563,35 @@ static void ssb_pcie_write(struct ssb_pc
 	pcicore_write32(pc, 0x134, data);
 }
 
-static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
-				u8 address, u16 data)
+static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy)
+{
+	const u16 mdio_control = 0x128;
+	const u16 mdio_data = 0x12C;
+	u32 v;
+	int i;
+
+	v = (1 << 30); /* Start of Transaction */
+	v |= (1 << 28); /* Write Transaction */
+	v |= (1 << 17); /* Turnaround */
+	v |= (0x1F << 18);
+	v |= (phy << 4);
+	pcicore_write32(pc, mdio_data, v);
+
+	udelay(10);
+	for (i = 0; i < 200; i++) {
+		v = pcicore_read32(pc, mdio_control);
+		if (v & 0x100 /* Trans complete */)
+			break;
+		msleep(1);
+	}
+}
+
+static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address)
 {
 	const u16 mdio_control = 0x128;
 	const u16 mdio_data = 0x12C;
+	int max_retries = 10;
+	u16 ret = 0;
 	u32 v;
 	int i;
 
@@ -458,46 +599,68 @@ static void ssb_pcie_mdio_write(struct s
 	v |= 0x2; /* MDIO Clock Divisor */
 	pcicore_write32(pc, mdio_control, v);
 
+	if (pc->dev->id.revision >= 10) {
+		max_retries = 200;
+		ssb_pcie_mdio_set_phy(pc, device);
+	}
+
 	v = (1 << 30); /* Start of Transaction */
-	v |= (1 << 28); /* Write Transaction */
+	v |= (1 << 29); /* Read Transaction */
 	v |= (1 << 17); /* Turnaround */
-	v |= (u32)device << 22;
+	if (pc->dev->id.revision < 10)
+		v |= (u32)device << 22;
 	v |= (u32)address << 18;
-	v |= data;
 	pcicore_write32(pc, mdio_data, v);
 	/* Wait for the device to complete the transaction */
 	udelay(10);
-	for (i = 0; i < 10; i++) {
+	for (i = 0; i < max_retries; i++) {
 		v = pcicore_read32(pc, mdio_control);
-		if (v & 0x100 /* Trans complete */)
+		if (v & 0x100 /* Trans complete */) {
+			udelay(10);
+			ret = pcicore_read32(pc, mdio_data);
 			break;
+		}
 		msleep(1);
 	}
 	pcicore_write32(pc, mdio_control, 0);
+	return ret;
 }
 
-static void ssb_broadcast_value(struct ssb_device *dev,
-				u32 address, u32 data)
+static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
+				u8 address, u16 data)
 {
-	/* This is used for both, PCI and ChipCommon core, so be careful. */
-	BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
-	BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
+	const u16 mdio_control = 0x128;
+	const u16 mdio_data = 0x12C;
+	int max_retries = 10;
+	u32 v;
+	int i;
 
-	ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
-	ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
-	ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
-	ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
-}
+	v = 0x80; /* Enable Preamble Sequence */
+	v |= 0x2; /* MDIO Clock Divisor */
+	pcicore_write32(pc, mdio_control, v);
 
-static void ssb_commit_settings(struct ssb_bus *bus)
-{
-	struct ssb_device *dev;
+	if (pc->dev->id.revision >= 10) {
+		max_retries = 200;
+		ssb_pcie_mdio_set_phy(pc, device);
+	}
 
-	dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
-	if (WARN_ON(!dev))
-		return;
-	/* This forces an update of the cached registers. */
-	ssb_broadcast_value(dev, 0xFD8, 0);
+	v = (1 << 30); /* Start of Transaction */
+	v |= (1 << 28); /* Write Transaction */
+	v |= (1 << 17); /* Turnaround */
+	if (pc->dev->id.revision < 10)
+		v |= (u32)device << 22;
+	v |= (u32)address << 18;
+	v |= data;
+	pcicore_write32(pc, mdio_data, v);
+	/* Wait for the device to complete the transaction */
+	udelay(10);
+	for (i = 0; i < max_retries; i++) {
+		v = pcicore_read32(pc, mdio_control);
+		if (v & 0x100 /* Trans complete */)
+			break;
+		msleep(1);
+	}
+	pcicore_write32(pc, mdio_control, 0);
 }
 
 int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
@@ -550,48 +713,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc
 	if (pc->setup_done)
 		goto out;
 	if (pdev->id.coreid == SSB_DEV_PCI) {
-		tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
-		tmp |= SSB_PCICORE_SBTOPCI_PREF;
-		tmp |= SSB_PCICORE_SBTOPCI_BURST;
-		pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
-
-		if (pdev->id.revision < 5) {
-			tmp = ssb_read32(pdev, SSB_IMCFGLO);
-			tmp &= ~SSB_IMCFGLO_SERTO;
-			tmp |= 2;
-			tmp &= ~SSB_IMCFGLO_REQTO;
-			tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
-			ssb_write32(pdev, SSB_IMCFGLO, tmp);
-			ssb_commit_settings(bus);
-		} else if (pdev->id.revision >= 11) {
-			tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
-			tmp |= SSB_PCICORE_SBTOPCI_MRM;
-			pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
-		}
+		ssb_pcicore_pci_setup_workarounds(pc);
 	} else {
 		WARN_ON(pdev->id.coreid != SSB_DEV_PCIE);
-		//TODO: Better make defines for all these magic PCIE values.
-		if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) {
-			/* TLP Workaround register. */
-			tmp = ssb_pcie_read(pc, 0x4);
-			tmp |= 0x8;
-			ssb_pcie_write(pc, 0x4, tmp);
-		}
-		if (pdev->id.revision == 0) {
-			const u8 serdes_rx_device = 0x1F;
-
-			ssb_pcie_mdio_write(pc, serdes_rx_device,
-					    2 /* Timer */, 0x8128);
-			ssb_pcie_mdio_write(pc, serdes_rx_device,
-					    6 /* CDR */, 0x0100);
-			ssb_pcie_mdio_write(pc, serdes_rx_device,
-					    7 /* CDR BW */, 0x1466);
-		} else if (pdev->id.revision == 1) {
-			/* DLLP Link Control register. */
-			tmp = ssb_pcie_read(pc, 0x100);
-			tmp |= 0x40;
-			ssb_pcie_write(pc, 0x100, tmp);
-		}
+		ssb_pcicore_pcie_setup_workarounds(pc);
 	}
 	pc->setup_done = 1;
 out:
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -2,7 +2,7 @@
  * Sonics Silicon Backplane
  * Common SPROM support routines
  *
- * Copyright (C) 2005-2008 Michael Buesch <mb@bu3sch.de>
+ * Copyright (C) 2005-2008 Michael Buesch <m@bues.ch>
  * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
  * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
  * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
@@ -17,7 +17,7 @@
 #include <linux/slab.h>
 
 
-static const struct ssb_sprom *fallback_sprom;
+static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
 
 
 static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
@@ -145,36 +145,43 @@ out:
 }
 
 /**
- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
+ * ssb_arch_register_fallback_sprom - Registers a method providing a
+ * fallback SPROM if no SPROM is found.
  *
- * @sprom: The SPROM data structure to register.
+ * @sprom_callback: The callback function.
  *
- * With this function the architecture implementation may register a fallback
- * SPROM data structure. The fallback is only used for PCI based SSB devices,
- * where no valid SPROM can be found in the shadow registers.
+ * With this function the architecture implementation may register a
+ * callback handler which fills the SPROM data structure. The fallback is
+ * only used for PCI based SSB devices, where no valid SPROM can be found
+ * in the shadow registers.
+ *
+ * This function is useful for weird architectures that have a half-assed
+ * SSB device hardwired to their PCI bus.
+ *
+ * Note that it does only work with PCI attached SSB devices. PCMCIA
+ * devices currently don't use this fallback.
+ * Architectures must provide the SPROM for native SSB devices anyway, so
+ * the fallback also isn't used for native devices.
  *
- * This function is useful for weird architectures that have a half-assed SSB device
- * hardwired to their PCI bus.
- *
- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently
- * don't use this fallback.
- * Architectures must provide the SPROM for native SSB devices anyway,
- * so the fallback also isn't used for native devices.
- *
- * This function is available for architecture code, only. So it is not exported.
+ * This function is available for architecture code, only. So it is not
+ * exported.
  */
-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
+int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus,
+				     struct ssb_sprom *out))
 {
-	if (fallback_sprom)
+	if (get_fallback_sprom)
 		return -EEXIST;
-	fallback_sprom = sprom;
+	get_fallback_sprom = sprom_callback;
 
 	return 0;
 }
 
-const struct ssb_sprom *ssb_get_fallback_sprom(void)
+int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
 {
-	return fallback_sprom;
+	if (!get_fallback_sprom)
+		return -ENOENT;
+
+	return get_fallback_sprom(bus, out);
 }
 
 /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
@@ -185,7 +192,7 @@ bool ssb_is_sprom_available(struct ssb_b
 	/* this routine differs from specs as we do not access SPROM directly
 	   on PCMCIA */
 	if (bus->bustype == SSB_BUSTYPE_PCI &&
-	    bus->chipco.dev &&	/* can be unavailible! */
+	    bus->chipco.dev &&	/* can be unavailable! */
 	    bus->chipco.dev->id.revision >= 31)
 		return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
 
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -171,7 +171,8 @@ ssize_t ssb_attr_sprom_store(struct ssb_
 			     const char *buf, size_t count,
 			     int (*sprom_check_crc)(const u16 *sprom, size_t size),
 			     int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
-extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
+extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus,
+					struct ssb_sprom *out);
 
 
 /* core.c */
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -8,7 +8,7 @@
  * gpio interface, extbus, and support for serial and parallel flashes.
  *
  * Copyright 2005, Broadcom Corporation
- * Copyright 2006, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, Michael Buesch <m@bues.ch>
  *
  * Licensed under the GPL version 2. See COPYING for details.
  */
@@ -123,6 +123,8 @@
 #define SSB_CHIPCO_FLASHDATA		0x0048
 #define SSB_CHIPCO_BCAST_ADDR		0x0050
 #define SSB_CHIPCO_BCAST_DATA		0x0054
+#define SSB_CHIPCO_GPIOPULLUP		0x0058		/* Rev >= 20 only */
+#define SSB_CHIPCO_GPIOPULLDOWN		0x005C		/* Rev >= 20 only */
 #define SSB_CHIPCO_GPIOIN		0x0060
 #define SSB_CHIPCO_GPIOOUT		0x0064
 #define SSB_CHIPCO_GPIOOUTEN		0x0068
@@ -131,6 +133,9 @@
 #define SSB_CHIPCO_GPIOIRQ		0x0074
 #define SSB_CHIPCO_WATCHDOG		0x0080
 #define SSB_CHIPCO_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
+#define  SSB_CHIPCO_GPIOTIMER_OFFTIME	0x0000FFFF
+#define  SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT	0
+#define  SSB_CHIPCO_GPIOTIMER_ONTIME	0xFFFF0000
 #define  SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT	16
 #define SSB_CHIPCO_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
 #define SSB_CHIPCO_CLOCK_N		0x0090
@@ -189,8 +194,10 @@
 #define  SSB_CHIPCO_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
 #define  SSB_CHIPCO_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
 #define  SSB_CHIPCO_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
-#define  SSB_CHIPCO_CLKCTLST_HAVEHT	0x00010000 /* HT available */
-#define  SSB_CHIPCO_CLKCTLST_HAVEALP	0x00020000 /* APL available */
+#define  SSB_CHIPCO_CLKCTLST_HAVEALP	0x00010000 /* ALP available */
+#define  SSB_CHIPCO_CLKCTLST_HAVEHT	0x00020000 /* HT available */
+#define  SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT	0x00010000 /* 4328a0 has reversed bits */
+#define  SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP	0x00020000 /* 4328a0 has reversed bits */
 #define SSB_CHIPCO_HW_WORKAROUND	0x01E4 /* Hardware workaround (rev >= 20) */
 #define SSB_CHIPCO_UART0_DATA		0x0300
 #define SSB_CHIPCO_UART0_IMR		0x0304
--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c
@@ -5,12 +5,13 @@
  * because of its small size we include it in the SSB core
  * instead of creating a standalone module.
  *
- * Copyright 2007  Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007  Michael Buesch <m@bues.ch>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 #include <linux/pci.h>
+#include <linux/module.h>
 #include <linux/ssb/ssb.h>
 
 #include "ssb_private.h"
--- a/drivers/ssb/driver_extif.c
+++ b/drivers/ssb/driver_extif.c
@@ -3,7 +3,7 @@
  * Broadcom EXTIF core driver
  *
  * Copyright 2005, Broadcom Corporation
- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
  * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
  * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net>
  *
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -3,7 +3,7 @@
  * Broadcom MIPS core driver
  *
  * Copyright 2005, Broadcom Corporation
- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -3,7 +3,7 @@
  * Embedded systems support code
  *
  * Copyright 2005-2008, Broadcom Corporation
- * Copyright 2006-2008, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006-2008, Michael Buesch <m@bues.ch>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -3,7 +3,7 @@
  * PCMCIA-Hostbus related functions
  *
  * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
--- a/drivers/ssb/sdio.c
+++ b/drivers/ssb/sdio.c
@@ -6,7 +6,7 @@
  *
  * Based on drivers/ssb/pcmcia.c
  * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  *