summaryrefslogtreecommitdiff
path: root/target/linux/ipq806x/patches-4.4/400-dsa-add-qca.patch
blob: c369ab914a946e4774f3b25bc3b1826b819ca9e9 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
From patchwork Fri May 29 01:42:16 2015
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [1/7] net: dsa: add new driver for ar8xxx family
From: Mathieu Olivari <mathieu@codeaurora.org>
X-Patchwork-Id: 477523
X-Patchwork-Delegate: davem@davemloft.net
Message-Id: <1432863742-18427-2-git-send-email-mathieu@codeaurora.org>
To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
 ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
 davem@davemloft.net, mathieu@codeaurora.org, andrew@lunn.ch,
 f.fainelli@gmail.com, linux@roeck-us.net, gang.chen.5i5j@gmail.com,
 jiri@resnulli.us, leitec@staticky.com, fabf@skynet.be,
 alexander.h.duyck@intel.com, pavel.nakonechny@skitlab.ru,
 joe@perches.com, sfeldma@gmail.com, nbd@nbd.name, juhosg@openwrt.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
 netdev@vger.kernel.org
Date: Thu, 28 May 2015 18:42:16 -0700

This patch contains initial init & registration code for QCA8337. It
will detect a QCA8337 switch, if present and declared in DT/platform.

Each port will be represented through a standalone net_device interface,
as for other DSA switches. CPU can communicate with any of the ports by
setting an IP@ on ethN interface. Ports cannot communicate with each
other just yet.

Link status will be reported through polling, and we don't use any
encapsulation.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
 drivers/net/dsa/Kconfig  |   7 ++
 drivers/net/dsa/Makefile |   1 +
 drivers/net/dsa/ar8xxx.c | 303 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/ar8xxx.h |  82 +++++++++++++
 net/dsa/dsa.c            |   1 +
 5 files changed, 394 insertions(+)
 create mode 100644 drivers/net/dsa/ar8xxx.c
 create mode 100644 drivers/net/dsa/ar8xxx.h

--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -65,4 +65,13 @@ config NET_DSA_BCM_SF2
 	  This enables support for the Broadcom Starfighter 2 Ethernet
 	  switch chips.
 
+config NET_DSA_AR8XXX
+	tristate "Qualcomm Atheros AR8XXX Ethernet switch family support"
+	depends on NET_DSA
+	select NET_DSA_TAG_QCA
+	select REGMAP
+	---help---
+	  This enables support for the Qualcomm Atheros AR8XXX Ethernet
+	  switch chips.
+
 endmenu
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -14,3 +14,4 @@ ifdef CONFIG_NET_DSA_MV88E6171
 mv88e6xxx_drv-y += mv88e6171.o
 endif
 obj-$(CONFIG_NET_DSA_BCM_SF2)	+= bcm_sf2.o
+obj-$(CONFIG_NET_DSA_AR8XXX)	+= ar8xxx.o
--- /dev/null
+++ b/drivers/net/dsa/ar8xxx.c
@@ -0,0 +1,529 @@
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <net/dsa.h>
+#include <linux/phy.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+
+#include "ar8xxx.h"
+
+#define MIB_DESC(_s, _o, _n)	\
+	{			\
+		.size = (_s),	\
+		.offset = (_o),	\
+		.name = (_n),	\
+	}
+
+static const struct ar8xxx_mib_desc ar8327_mib[] = {
+	MIB_DESC(1, 0x00, "RxBroad"),
+	MIB_DESC(1, 0x04, "RxPause"),
+	MIB_DESC(1, 0x08, "RxMulti"),
+	MIB_DESC(1, 0x0c, "RxFcsErr"),
+	MIB_DESC(1, 0x10, "RxAlignErr"),
+	MIB_DESC(1, 0x14, "RxRunt"),
+	MIB_DESC(1, 0x18, "RxFragment"),
+	MIB_DESC(1, 0x1c, "Rx64Byte"),
+	MIB_DESC(1, 0x20, "Rx128Byte"),
+	MIB_DESC(1, 0x24, "Rx256Byte"),
+	MIB_DESC(1, 0x28, "Rx512Byte"),
+	MIB_DESC(1, 0x2c, "Rx1024Byte"),
+	MIB_DESC(1, 0x30, "Rx1518Byte"),
+	MIB_DESC(1, 0x34, "RxMaxByte"),
+	MIB_DESC(1, 0x38, "RxTooLong"),
+	MIB_DESC(2, 0x3c, "RxGoodByte"),
+	MIB_DESC(2, 0x44, "RxBadByte"),
+	MIB_DESC(1, 0x4c, "RxOverFlow"),
+	MIB_DESC(1, 0x50, "Filtered"),
+	MIB_DESC(1, 0x54, "TxBroad"),
+	MIB_DESC(1, 0x58, "TxPause"),
+	MIB_DESC(1, 0x5c, "TxMulti"),
+	MIB_DESC(1, 0x60, "TxUnderRun"),
+	MIB_DESC(1, 0x64, "Tx64Byte"),
+	MIB_DESC(1, 0x68, "Tx128Byte"),
+	MIB_DESC(1, 0x6c, "Tx256Byte"),
+	MIB_DESC(1, 0x70, "Tx512Byte"),
+	MIB_DESC(1, 0x74, "Tx1024Byte"),
+	MIB_DESC(1, 0x78, "Tx1518Byte"),
+	MIB_DESC(1, 0x7c, "TxMaxByte"),
+	MIB_DESC(1, 0x80, "TxOverSize"),
+	MIB_DESC(2, 0x84, "TxByte"),
+	MIB_DESC(1, 0x8c, "TxCollision"),
+	MIB_DESC(1, 0x90, "TxAbortCol"),
+	MIB_DESC(1, 0x94, "TxMultiCol"),
+	MIB_DESC(1, 0x98, "TxSingleCol"),
+	MIB_DESC(1, 0x9c, "TxExcDefer"),
+	MIB_DESC(1, 0xa0, "TxDefer"),
+	MIB_DESC(1, 0xa4, "TxLateCol"),
+};
+
+u32
+ar8xxx_mii_read32(struct mii_bus *bus, int phy_id, int regnum)
+{
+	u16 lo, hi;
+
+	lo = bus->read(bus, phy_id, regnum);
+	hi = bus->read(bus, phy_id, regnum + 1);
+
+	return (hi << 16) | lo;
+}
+
+void
+ar8xxx_mii_write32(struct mii_bus *bus, int phy_id, int regnum, u32 val)
+{
+	u16 lo, hi;
+
+	lo = val & 0xffff;
+	hi = (u16)(val >> 16);
+
+	bus->write(bus, phy_id, regnum, lo);
+	bus->write(bus, phy_id, regnum + 1, hi);
+}
+
+u32 ar8xxx_read(struct dsa_switch *ds, int reg)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+	u16 r1, r2, page;
+	u32 val;
+
+	split_addr((u32)reg, &r1, &r2, &page);
+
+	mutex_lock(&bus->mdio_lock);
+
+	bus->write(bus, 0x18, 0, page);
+	wait_for_page_switch();
+	val = ar8xxx_mii_read32(bus, 0x10 | r2, r1);
+
+	mutex_unlock(&bus->mdio_lock);
+
+	return val;
+}
+
+void ar8xxx_write(struct dsa_switch *ds, int reg, u32 val)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+	u16 r1, r2, page;
+
+	split_addr((u32)reg, &r1, &r2, &page);
+
+	mutex_lock(&bus->mdio_lock);
+
+	bus->write(bus, 0x18, 0, page);
+	wait_for_page_switch();
+	ar8xxx_mii_write32(bus, 0x10 | r2, r1, val);
+
+	mutex_unlock(&bus->mdio_lock);
+}
+
+u32
+ar8xxx_rmw(struct dsa_switch *ds, int reg, u32 mask, u32 val)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+	u16 r1, r2, page;
+	u32 ret;
+
+	split_addr((u32)reg, &r1, &r2, &page);
+
+	mutex_lock(&bus->mdio_lock);
+
+	bus->write(bus, 0x18, 0, page);
+	wait_for_page_switch();
+
+	ret = ar8xxx_mii_read32(bus, 0x10 | r2, r1);
+	ret &= ~mask;
+	ret |= val;
+	ar8xxx_mii_write32(bus, 0x10 | r2, r1, ret);
+
+	mutex_unlock(&bus->mdio_lock);
+
+	return ret;
+}
+
+static char *ar8xxx_probe(struct device *host_dev, int sw_addr)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+	u32 phy_id;
+
+	if (!bus)
+		return NULL;
+
+	/* sw_addr is irrelevant as the switch occupies the MDIO bus from
+	 * addresses 0 to 4 (PHYs) and 16-23 (for MDIO 32bits protocol). So
+	 * we'll probe address 0 to see if we see the right switch family.
+	 */
+	phy_id = mdiobus_read(bus, 0, MII_PHYSID1) << 16;
+	phy_id |= mdiobus_read(bus, 0, MII_PHYSID2);
+
+	switch (phy_id) {
+	case PHY_ID_QCA8337:
+		return "QCA8337";
+	default:
+		return NULL;
+	}
+}
+
+static int ar8xxx_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
+{
+	struct dsa_switch *ds = (struct dsa_switch *)ctx;
+
+	*val = ar8xxx_read(ds, reg);
+
+	return 0;
+}
+
+static int ar8xxx_regmap_write(void *ctx, uint32_t reg, uint32_t val)
+{
+	struct dsa_switch *ds = (struct dsa_switch *)ctx;
+
+	ar8xxx_write(ds, reg, val);
+
+	return 0;
+}
+
+static const struct regmap_range ar8xxx_readable_ranges[] = {
+	regmap_reg_range(0x0000, 0x00e4), /* Global control */
+	regmap_reg_range(0x0100, 0x0168), /* EEE control */
+	regmap_reg_range(0x0200, 0x0270), /* Parser control */
+	regmap_reg_range(0x0400, 0x0454), /* ACL */
+	regmap_reg_range(0x0600, 0x0718), /* Lookup */
+	regmap_reg_range(0x0800, 0x0b70), /* QM */
+	regmap_reg_range(0x0C00, 0x0c80), /* PKT */
+	regmap_reg_range(0x1000, 0x10ac), /* MIB - Port0 */
+	regmap_reg_range(0x1100, 0x11ac), /* MIB - Port1 */
+	regmap_reg_range(0x1200, 0x12ac), /* MIB - Port2 */
+	regmap_reg_range(0x1300, 0x13ac), /* MIB - Port3 */
+	regmap_reg_range(0x1400, 0x14ac), /* MIB - Port4 */
+	regmap_reg_range(0x1500, 0x15ac), /* MIB - Port5 */
+	regmap_reg_range(0x1600, 0x16ac), /* MIB - Port6 */
+
+};
+
+static struct regmap_access_table ar8xxx_readable_table = {
+	.yes_ranges = ar8xxx_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(ar8xxx_readable_ranges),
+};
+
+struct regmap_config ar8xxx_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 0x16ac, /* end MIB - Port6 range */
+	.reg_read = ar8xxx_regmap_read,
+	.reg_write = ar8xxx_regmap_write,
+	.rd_table = &ar8xxx_readable_table,
+};
+
+static int ar8xxx_set_pad_ctrl(struct dsa_switch *ds, int port, int mode)
+{
+	int reg;
+
+	switch (port) {
+	case 0:
+		reg = AR8327_REG_PORT0_PAD_CTRL;
+		break;
+	case 6:
+		reg = AR8327_REG_PORT6_PAD_CTRL;
+		break;
+	default:
+		pr_err("Can't set PAD_CTRL on port %d\n", port);
+		return -EINVAL;
+	}
+
+	/* DSA only supports 1 CPU port for now, so we'll take the assumption
+	 * that P0 is connected to the CPU master_dev.
+	 */
+	switch (mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		ar8xxx_write(ds, reg,
+			     AR8327_PORT_PAD_RGMII_EN |
+			     AR8327_PORT_PAD_RGMII_TX_DELAY(3) |
+			     AR8327_PORT_PAD_RGMII_RX_DELAY(3));
+
+		/* According to the datasheet, RGMII delay is enabled through
+		 * PORT5_PAD_CTRL for all ports, rather than individual port
+		 * registers
+		 */
+		ar8xxx_write(ds, AR8327_REG_PORT5_PAD_CTRL,
+			     AR8327_PORT_PAD_RGMII_RX_DELAY_EN);
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		ar8xxx_write(ds, reg, AR8327_PORT_PAD_SGMII_EN);
+		break;
+	default:
+		pr_err("xMII mode %d not supported\n", mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ar8xxx_of_setup(struct dsa_switch *ds)
+{
+	struct device_node *dn = ds->pd->of_node;
+	const char *s_phymode;
+	int ret, mode;
+	u32 phy_id, ctrl;
+
+	/* If port6-phy-mode property exists, configure it accordingly */
+	if (!of_property_read_string(dn, "qca,port6-phy-mode", &s_phymode)) {
+		for (mode = 0; mode < PHY_INTERFACE_MODE_MAX; mode++)
+			if (!strcasecmp(s_phymode, phy_modes(mode)))
+				break;
+
+		if (mode == PHY_INTERFACE_MODE_MAX)
+			pr_err("Unknown phy-mode: \"%s\"\n", s_phymode);
+
+		ret = ar8xxx_set_pad_ctrl(ds, 6, mode);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* If a phy ID is specified for PORT6 mac, connect them together */
+	if (!of_property_read_u32(dn, "qca,port6-phy-id", &phy_id)) {
+		ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(6),
+			   AR8327_PORT_LOOKUP_MEMBER, BIT(phy_to_port(phy_id)));
+		ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(phy_to_port(phy_id)),
+			   AR8327_PORT_LOOKUP_MEMBER, BIT(6));
+
+		/* We want the switch to be pass-through and act like a PHY on
+		 * these ports. So BC/MC/UC & IGMP frames need to be accepted
+		 */
+		ctrl = BIT(phy_to_port(phy_id)) | BIT(6);
+		ar8xxx_reg_set(ds, AR8327_REG_GLOBAL_FW_CTRL1,
+			       ctrl << AR8327_GLOBAL_FW_CTRL1_IGMP_DP_S |
+			       ctrl << AR8327_GLOBAL_FW_CTRL1_BC_DP_S |
+			       ctrl << AR8327_GLOBAL_FW_CTRL1_MC_DP_S |
+			       ctrl << AR8327_GLOBAL_FW_CTRL1_UC_DP_S);
+	}
+
+	return 0;
+}
+
+static int ar8xxx_setup(struct dsa_switch *ds)
+{
+	struct ar8xxx_priv *priv = ds_to_priv(ds);
+	struct net_device *netdev = ds->dst->pd->of_netdev;
+	int ret, i, phy_mode;
+
+	/* Start by setting up the register mapping */
+	priv->regmap = devm_regmap_init(ds->master_dev, NULL, ds,
+					&ar8xxx_regmap_config);
+
+	if (IS_ERR(priv->regmap))
+		pr_warn("regmap initialization failed");
+
+	/* Initialize CPU port pad mode (xMII type, delays...) */
+	phy_mode = of_get_phy_mode(netdev->dev.parent->of_node);
+	if (phy_mode < 0) {
+		pr_err("Can't find phy-mode for master device\n");
+		return phy_mode;
+	}
+
+	ret = ar8xxx_set_pad_ctrl(ds, 0, phy_mode);
+	if (ret < 0)
+		return ret;
+
+	/* Enable CPU Port */
+	ar8xxx_reg_set(ds, AR8327_REG_GLOBAL_FW_CTRL0,
+		       AR8327_GLOBAL_FW_CTRL0_CPU_PORT_EN);
+
+	/* Enable MIB counters */
+	ar8xxx_reg_set(ds, AR8327_REG_MIB, AR8327_MIB_CPU_KEEP);
+	ar8xxx_write(ds, AR8327_REG_MODULE_EN, AR8327_MODULE_EN_MIB);
+
+	/* Enable QCA header mode on Port 0 */
+	ar8xxx_write(ds, AR8327_REG_PORT_HDR_CTRL(0),
+		     AR8327_PORT_HDR_CTRL_ALL << AR8327_PORT_HDR_CTRL_TX_S |
+		     AR8327_PORT_HDR_CTRL_ALL << AR8327_PORT_HDR_CTRL_RX_S);
+
+	/* Disable forwarding by default on all ports */
+	for (i = 0; i < AR8327_NUM_PORTS; i++)
+		ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(i),
+			   AR8327_PORT_LOOKUP_MEMBER, 0);
+
+	/* Forward all unknown frames to CPU port for Linux processing */
+	ar8xxx_write(ds, AR8327_REG_GLOBAL_FW_CTRL1,
+		     BIT(0) << AR8327_GLOBAL_FW_CTRL1_IGMP_DP_S |
+		     BIT(0) << AR8327_GLOBAL_FW_CTRL1_BC_DP_S |
+		     BIT(0) << AR8327_GLOBAL_FW_CTRL1_MC_DP_S |
+		     BIT(0) << AR8327_GLOBAL_FW_CTRL1_UC_DP_S);
+
+	/* Setup connection between CPU ports & PHYs */
+	for (i = 0; i < DSA_MAX_PORTS; i++) {
+		/* CPU port gets connected to all PHYs in the switch */
+		if (dsa_is_cpu_port(ds, i)) {
+			ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(0),
+				   AR8327_PORT_LOOKUP_MEMBER,
+				   ds->phys_port_mask << 1);
+		}
+
+		/* Invividual PHYs gets connected to CPU port only */
+		if (ds->phys_port_mask & BIT(i)) {
+			int phy = phy_to_port(i);
+
+			ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(phy),
+				   AR8327_PORT_LOOKUP_MEMBER, BIT(0));
+
+			/* Disable Auto-learning by default so the switch
+			 * doesn't try to forward the frame to another port
+			 */
+			ar8xxx_reg_clear(ds, AR8327_PORT_LOOKUP_CTRL(phy),
+					 AR8327_PORT_LOOKUP_LEARN);
+		}
+	}
+
+	ret = ar8xxx_of_setup(ds);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int ar8xxx_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+	return 0;
+}
+
+static int ar8xxx_phy_read(struct dsa_switch *ds, int phy, int regnum)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+
+	return mdiobus_read(bus, phy, regnum);
+}
+
+static int
+ar8xxx_phy_write(struct dsa_switch *ds, int phy, int regnum, u16 val)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+
+	return mdiobus_write(bus, phy, regnum, val);
+}
+
+static void ar8xxx_get_strings(struct dsa_switch *ds, int phy, uint8_t *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
+		strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name,
+			ETH_GSTRING_LEN);
+	}
+}
+
+static void ar8xxx_get_ethtool_stats(struct dsa_switch *ds, int phy,
+				     uint64_t *data)
+{
+	const struct ar8xxx_mib_desc *mib;
+	uint32_t reg, i, port;
+	u64 hi;
+
+	port = phy_to_port(phy);
+
+	for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
+		mib = &ar8327_mib[i];
+		reg = AR8327_PORT_MIB_COUNTER(port) + mib->offset;
+
+		data[i] = ar8xxx_read(ds, reg);
+		if (mib->size == 2) {
+			hi = ar8xxx_read(ds, reg + 4);
+			data[i] |= hi << 32;
+		}
+	}
+}
+
+static int ar8xxx_get_sset_count(struct dsa_switch *ds)
+{
+	return ARRAY_SIZE(ar8327_mib);
+}
+
+static void ar8xxx_poll_link(struct dsa_switch *ds)
+{
+	int i = 0;
+	struct net_device *dev;
+
+	while ((dev = ds->ports[i++]) != NULL) {
+		u32 status;
+		int link;
+		int speed;
+		int duplex;
+
+		status = ar8xxx_read(ds, AR8327_REG_PORT_STATUS(i));
+		link = !!(status & AR8XXX_PORT_STATUS_LINK_UP);
+		duplex = !!(status & AR8XXX_PORT_STATUS_DUPLEX);
+
+		switch (status & AR8XXX_PORT_STATUS_SPEED) {
+		case AR8XXX_PORT_SPEED_10M:
+			speed = 10;
+			break;
+		case AR8XXX_PORT_SPEED_100M:
+			speed = 100;
+			break;
+		case AR8XXX_PORT_SPEED_1000M:
+			speed = 1000;
+			break;
+		default:
+			speed = 0;
+		}
+
+		if (!link) {
+			/* This poll happens every ~1s, so we don't want to
+			 * print the status every time. Only when the device
+			 * transitions from Link UP to Link DOWN
+			 */
+			if (netif_carrier_ok(dev))
+				netif_carrier_off(dev);
+			continue;
+		} else {
+			/* Same thing here. But we detect a Link UP event */
+			if (!netif_carrier_ok(dev))
+				netif_carrier_on(dev);
+			continue;
+		}
+	}
+}
+
+static struct dsa_switch_driver ar8xxx_switch_driver = {
+	.tag_protocol		= DSA_TAG_PROTO_QCA,
+	.priv_size		= sizeof(struct ar8xxx_priv),
+	.probe			= ar8xxx_probe,
+	.setup			= ar8xxx_setup,
+	.set_addr		= ar8xxx_set_addr,
+	.poll_link		= ar8xxx_poll_link,
+	.phy_read		= ar8xxx_phy_read,
+	.phy_write		= ar8xxx_phy_write,
+	.get_strings		= ar8xxx_get_strings,
+	.get_ethtool_stats	= ar8xxx_get_ethtool_stats,
+	.get_sset_count		= ar8xxx_get_sset_count,
+};
+
+static int __init ar8xxx_init(void)
+{
+	register_switch_driver(&ar8xxx_switch_driver);
+	return 0;
+}
+module_init(ar8xxx_init);
+
+static void __exit ar8xxx_cleanup(void)
+{
+	unregister_switch_driver(&ar8xxx_switch_driver);
+}
+module_exit(ar8xxx_cleanup);
+
+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
+MODULE_DESCRIPTION("Driver for AR8XXX ethernet switch family");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ar8xxx");
--- /dev/null
+++ b/drivers/net/dsa/ar8xxx.h
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __AR8XXX_H
+#define __AR8XXX_H
+
+#include <linux/delay.h>
+#include <linux/regmap.h>
+
+struct ar8xxx_priv {
+	struct regmap *regmap;
+};
+
+struct ar8xxx_mib_desc {
+	unsigned int size;
+	unsigned int offset;
+	const char *name;
+};
+
+#define AR8327_NUM_PORTS		7
+
+#define PHY_ID_QCA8337			0x004dd036
+
+#define AR8327_REG_PORT0_PAD_CTRL		0x004
+#define AR8327_REG_PORT5_PAD_CTRL		0x008
+#define AR8327_REG_PORT6_PAD_CTRL		0x00c
+#define   AR8327_PORT_PAD_RGMII_EN		BIT(26)
+#define   AR8327_PORT_PAD_RGMII_TX_DELAY(x)	((0x8 + (x & 0x3)) << 22)
+#define   AR8327_PORT_PAD_RGMII_RX_DELAY(x)	((0x10 + (x & 0x3)) << 20)
+#define   AR8327_PORT_PAD_RGMII_RX_DELAY_EN	BIT(24)
+#define   AR8327_PORT_PAD_SGMII_EN		BIT(7)
+
+#define AR8327_REG_MODULE_EN			0x030
+#define   AR8327_MODULE_EN_MIB			BIT(0)
+#define	  AR8327_MODULE_EN_ACL			BIT(1)
+#define	  AR8327_MODULE_EN_L3			BIT(2)
+
+#define AR8327_REG_MIB				0x034
+#define   AR8327_MIB_CPU_KEEP			BIT(20)
+
+#define AR8327_REG_PORT_STATUS(_i)		(0x07c + (_i) * 4)
+#define   AR8XXX_PORT_STATUS_SPEED	GENMASK(2, 0)
+#define   AR8XXX_PORT_STATUS_SPEED_S	0
+#define   AR8XXX_PORT_STATUS_TXMAC	BIT(2)
+#define   AR8XXX_PORT_STATUS_RXMAC	BIT(3)
+#define   AR8XXX_PORT_STATUS_TXFLOW	BIT(4)
+#define   AR8XXX_PORT_STATUS_RXFLOW	BIT(5)
+#define   AR8XXX_PORT_STATUS_DUPLEX	BIT(6)
+#define   AR8XXX_PORT_STATUS_LINK_UP	BIT(8)
+#define   AR8XXX_PORT_STATUS_LINK_AUTO	BIT(9)
+#define   AR8XXX_PORT_STATUS_LINK_PAUSE	BIT(10)
+
+#define AR8327_REG_PORT_HDR_CTRL(_i)		(0x9c + (_i * 4))
+#define   AR8327_PORT_HDR_CTRL_RX_MASK		GENMASK(3, 2)
+#define   AR8327_PORT_HDR_CTRL_RX_S		2
+#define   AR8327_PORT_HDR_CTRL_TX_MASK		GENMASK(1, 0)
+#define   AR8327_PORT_HDR_CTRL_TX_S		0
+#define   AR8327_PORT_HDR_CTRL_ALL		2
+#define   AR8327_PORT_HDR_CTRL_MGMT		1
+#define   AR8327_PORT_HDR_CTRL_NONE		0
+
+#define AR8327_REG_GLOBAL_FW_CTRL0		0x620
+#define   AR8327_GLOBAL_FW_CTRL0_CPU_PORT_EN	BIT(10)
+
+#define AR8327_REG_GLOBAL_FW_CTRL1		0x624
+#define   AR8327_GLOBAL_FW_CTRL1_IGMP_DP_MASK	GENMASK(30, 24)
+#define   AR8327_GLOBAL_FW_CTRL1_IGMP_DP_S	24
+#define   AR8327_GLOBAL_FW_CTRL1_BC_DP_MASK	GENMASK(22, 16)
+#define   AR8327_GLOBAL_FW_CTRL1_BC_DP_S	16
+#define   AR8327_GLOBAL_FW_CTRL1_MC_DP_MASK	GENMASK(14, 8)
+#define   AR8327_GLOBAL_FW_CTRL1_MC_DP_S	8
+#define   AR8327_GLOBAL_FW_CTRL1_UC_DP_MASK	GENMASK(6, 0)
+#define   AR8327_GLOBAL_FW_CTRL1_UC_DP_S	0
+
+#define AR8327_PORT_LOOKUP_CTRL(_i)		(0x660 + (_i) * 0xc)
+#define   AR8327_PORT_LOOKUP_MEMBER		GENMASK(6, 0)
+#define   AR8327_PORT_LOOKUP_IN_MODE		GENMASK(9, 8)
+#define   AR8327_PORT_LOOKUP_IN_MODE_S		8
+#define   AR8327_PORT_LOOKUP_STATE		GENMASK(18, 16)
+#define   AR8327_PORT_LOOKUP_STATE_S		16
+#define   AR8327_PORT_LOOKUP_LEARN		BIT(20)
+#define   AR8327_PORT_LOOKUP_ING_MIRROR_EN	BIT(25)
+
+#define AR8327_PORT_MIB_COUNTER(_i)		(0x1000 + (_i) * 0x100)
+
+/* port speed */
+enum {
+	AR8XXX_PORT_SPEED_10M = 0,
+	AR8XXX_PORT_SPEED_100M = 1,
+	AR8XXX_PORT_SPEED_1000M = 2,
+	AR8XXX_PORT_SPEED_ERR = 3,
+};
+
+static inline int port_to_phy(int port)
+{
+	if (port >= 1 && port <= 6)
+		return port - 1;
+
+	return -1;
+}
+
+static inline int phy_to_port(int phy)
+{
+	if (phy < 5)
+		return phy + 1;
+
+	return -1;
+}
+
+u32
+ar8xxx_rmw(struct dsa_switch *ds, int reg, u32 mask, u32 val);
+
+static inline void
+split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
+{
+	regaddr >>= 1;
+	*r1 = regaddr & 0x1e;
+
+	regaddr >>= 5;
+	*r2 = regaddr & 0x7;
+
+	regaddr >>= 3;
+	*page = regaddr & 0x1ff;
+}
+
+static inline void
+wait_for_page_switch(void)
+{
+	udelay(5);
+}
+
+static inline void
+ar8xxx_reg_set(struct dsa_switch *ds, int reg, u32 val)
+{
+	ar8xxx_rmw(ds, reg, 0, val);
+}
+
+static inline void
+ar8xxx_reg_clear(struct dsa_switch *ds, int reg, u32 val)
+{
+	ar8xxx_rmw(ds, reg, val, 0);
+}
+
+#endif /* __AR8XXX_H */
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -285,6 +285,11 @@ static int dsa_switch_setup_one(struct d
 			dst->rcv = brcm_netdev_ops.rcv;
 			break;
 #endif
+#ifdef CONFIG_NET_DSA_TAG_QCA
+		case DSA_TAG_PROTO_QCA:
+			dst->rcv = qca_netdev_ops.rcv;
+			break;
+#endif
 		case DSA_TAG_PROTO_NONE:
 			break;
 		default:
@@ -1041,6 +1046,7 @@ static SIMPLE_DEV_PM_OPS(dsa_pm_ops, dsa
 
 static const struct of_device_id dsa_of_match_table[] = {
 	{ .compatible = "brcm,bcm7445-switch-v4.0" },
+	{ .compatible = "qca,ar8xxx", },
 	{ .compatible = "marvell,dsa", },
 	{}
 };
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -26,6 +26,7 @@ enum dsa_tag_protocol {
 	DSA_TAG_PROTO_TRAILER,
 	DSA_TAG_PROTO_EDSA,
 	DSA_TAG_PROTO_BRCM,
+	DSA_TAG_PROTO_QCA,
 };
 
 #define DSA_MAX_SWITCHES	4
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -26,6 +26,9 @@ config NET_DSA_HWMON
 	  via the hwmon sysfs interface and exposes the onboard sensors.
 
 # tagging formats
+config NET_DSA_TAG_QCA
+	bool
+
 config NET_DSA_TAG_BRCM
 	bool
 
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_NET_DSA) += dsa_core.o
 dsa_core-y += dsa.o slave.o
 
 # tagging formats
+dsa_core-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
 dsa_core-$(CONFIG_NET_DSA_TAG_BRCM) += tag_brcm.o
 dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
 dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -78,5 +78,7 @@ extern const struct dsa_device_ops trail
 /* tag_brcm.c */
 extern const struct dsa_device_ops brcm_netdev_ops;
 
+/* tag_qca.c */
+extern const struct dsa_device_ops qca_netdev_ops;
 
 #endif
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1180,6 +1180,11 @@ int dsa_slave_create(struct dsa_switch *
 		p->xmit = brcm_netdev_ops.xmit;
 		break;
 #endif
+#ifdef CONFIG_NET_DSA_TAG_QCA
+	case DSA_TAG_PROTO_QCA:
+		p->xmit = qca_netdev_ops.xmit;
+		break;
+#endif
 	default:
 		p->xmit	= dsa_slave_notag_xmit;
 		break;
--- /dev/null
+++ b/net/dsa/tag_qca.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/etherdevice.h>
+#include "dsa_priv.h"
+
+#define QCA_HDR_LEN	2
+#define QCA_HDR_VERSION	0x2
+
+#define QCA_HDR_RECV_VERSION_MASK	GENMASK(15, 14)
+#define QCA_HDR_RECV_VERSION_S		14
+#define QCA_HDR_RECV_PRIORITY_MASK	GENMASK(13, 11)
+#define QCA_HDR_RECV_PRIORITY_S		11
+#define QCA_HDR_RECV_TYPE_MASK		GENMASK(10, 6)
+#define QCA_HDR_RECV_TYPE_S		6
+#define QCA_HDR_RECV_FRAME_IS_TAGGED	BIT(3)
+#define QCA_HDR_RECV_SOURCE_PORT_MASK	GENMASK(2, 0)
+
+#define QCA_HDR_XMIT_VERSION_MASK	GENMASK(15, 14)
+#define QCA_HDR_XMIT_VERSION_S		14
+#define QCA_HDR_XMIT_PRIORITY_MASK	GENMASK(13, 11)
+#define QCA_HDR_XMIT_PRIORITY_S		11
+#define QCA_HDR_XMIT_CONTROL_MASK	GENMASK(10, 8)
+#define QCA_HDR_XMIT_CONTROL_S		8
+#define QCA_HDR_XMIT_FROM_CPU		BIT(7)
+#define QCA_HDR_XMIT_DP_BIT_MASK	GENMASK(6, 0)
+
+static inline int reg_to_port(int reg)
+{
+	if (reg < 5)
+		return reg + 1;
+
+	return -1;
+}
+
+static inline int port_to_reg(int port)
+{
+	if (port >= 1 && port <= 6)
+		return port - 1;
+
+	return -1;
+}
+
+static netdev_tx_t qca_tag_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct dsa_slave_priv *p = netdev_priv(dev);
+	u16 *phdr, hdr;
+
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += skb->len;
+
+	if (skb_cow_head(skb, 0) < 0)
+		goto out_free;
+
+	skb_push(skb, QCA_HDR_LEN);
+
+	memmove(skb->data, skb->data + QCA_HDR_LEN, 2 * ETH_ALEN);
+	phdr = (u16 *)(skb->data + 2 * ETH_ALEN);
+
+	/* Set the version field, and set destination port information */
+	hdr = QCA_HDR_VERSION << QCA_HDR_XMIT_VERSION_S |
+		QCA_HDR_XMIT_FROM_CPU |
+		1 << reg_to_port(p->port);
+
+	*phdr = htons(hdr);
+
+	skb->dev = p->parent->dst->master_netdev;
+	dev_queue_xmit(skb);
+
+	return NETDEV_TX_OK;
+
+out_free:
+	kfree_skb(skb);
+	return NETDEV_TX_OK;
+}
+
+static int qca_tag_rcv(struct sk_buff *skb, struct net_device *dev,
+		       struct packet_type *pt, struct net_device *orig_dev)
+{
+	struct dsa_switch_tree *dst = dev->dsa_ptr;
+	struct dsa_switch *ds;
+	u8 ver;
+	int port, phy;
+	__be16 *phdr, hdr;
+
+	if (unlikely(!dst))
+		goto out_drop;
+
+	skb = skb_unshare(skb, GFP_ATOMIC);
+	if (!skb)
+		goto out;
+
+	if (unlikely(!pskb_may_pull(skb, QCA_HDR_LEN)))
+		goto out_drop;
+
+	/* Ethernet is added by the switch between src addr and Ethertype
+	 * At this point, skb->data points to ethertype so header should be
+	 * right before
+	 */
+	phdr = (__be16 *)(skb->data - 2);
+	hdr = ntohs(*phdr);
+
+	/* Make sure the version is correct */
+	ver = (hdr & QCA_HDR_RECV_VERSION_MASK) >> QCA_HDR_RECV_VERSION_S;
+	if (unlikely(ver != QCA_HDR_VERSION))
+		goto out_drop;
+
+	/* Remove QCA tag and recalculate checksum */
+	skb_pull_rcsum(skb, QCA_HDR_LEN);
+	memmove(skb->data - ETH_HLEN, skb->data - ETH_HLEN - QCA_HDR_LEN,
+		ETH_HLEN - QCA_HDR_LEN);
+
+	/* This protocol doesn't support cascading multiple switches so it's
+	 * safe to assume the switch is first in the tree
+	 */
+	ds = dst->ds[0];
+	if (!ds)
+		goto out_drop;
+
+	/* Get source port information */
+	port = (hdr & QCA_HDR_RECV_SOURCE_PORT_MASK);
+	phy = port_to_reg(port);
+	if (unlikely(phy < 0) || !ds->ports[phy])
+		goto out_drop;
+
+	/* Update skb & forward the frame accordingly */
+	skb_push(skb, ETH_HLEN);
+	skb->pkt_type = PACKET_HOST;
+	skb->dev = ds->ports[phy];
+	skb->protocol = eth_type_trans(skb, skb->dev);
+
+	skb->dev->stats.rx_packets++;
+	skb->dev->stats.rx_bytes += skb->len;
+
+	netif_receive_skb(skb);
+
+	return 0;
+
+out_drop:
+	kfree_skb(skb);
+out:
+	return 0;
+}
+
+const struct dsa_device_ops qca_netdev_ops = {
+	.xmit	= qca_tag_xmit,
+	.rcv	= qca_tag_rcv,
+};
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/qca-ar8xxx.txt
@@ -0,0 +1,70 @@
+* Qualcomm Atheros AR8xxx switch family
+
+Required properties:
+
+- compatible: should be "qca,ar8xxx"
+- dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt
+- dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt
+- #size-cells: must be 0
+- #address-cells: must be 2, see dsa/dsa.txt
+
+Subnodes:
+
+The integrated switch subnode should be specified according to the binding
+described in dsa/dsa.txt.
+
+Optional properties:
+
+- qca,port6-phy-mode: if specified, the driver will configure Port 6 in the
+  given phy-mode. See Documentation/devicetree/bindings/net/ethernet.txt for
+  the list of valid phy-mode.
+
+- qca,port6-phy-id: if specified, the driver will connect Port 6 to the PHY
+  given as a parameter. In this case, Port6 and the corresponding PHY will be
+  isolated from the rest of the switch. From a system perspective, they will
+  act as a regular PHY.
+
+Example:
+
+	dsa@0 {
+		compatible = "qca,ar8xxx";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&ethernet0>;
+		dsa,mii-bus = <&mii_bus0>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
+
+			qca,port6-phy-mode = "sgmii";
+			qca,port6-phy-id = <4>;
+
+			port@0 {
+				reg = <11>;
+				label = "cpu";
+			};
+
+			port@1 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@2 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@3 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@4 {
+				reg = <3>;
+				label = "lan4";
+			};
+		};
+	};