1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
/*
* D-Link DIR-300 rev B board support
*
* Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt305x.h>
#include <asm/mach-ralink/rt305x_regs.h>
#include "devices.h"
#define DIR_300B_GPIO_LED_STATUS_AMBER 8
#define DIR_300B_GPIO_LED_STATUS_GREEN 9
#define DIR_300B_GPIO_LED_WPS 13
#define DIR_300B_GPIO_BUTTON_WPS 0 /* active low */
#define DIR_300B_GPIO_BUTTON_RESET 10 /* active low */
#define DIR_300B_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition dir_300b_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x030000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "devdata",
.offset = 0x030000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "devconf",
.offset = 0x040000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = 0x050000,
.size = 0x0d0000,
}, {
.name = "rootfs",
.offset = 0x120000,
.size = 0x2e0000,
}, {
.name = "firmware",
.offset = 0x050000,
.size = 0x3b0000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct physmap_flash_data dir_300b_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.nr_parts = ARRAY_SIZE(dir_300b_partitions),
.parts = dir_300b_partitions,
#endif
};
static struct gpio_led dir_300b_leds_gpio[] __initdata = {
{
.name = "d-link:amber:status",
.gpio = DIR_300B_GPIO_LED_STATUS_AMBER,
.active_low = 1,
}, {
.name = "d-link:green:status",
.gpio = DIR_300B_GPIO_LED_STATUS_GREEN,
.active_low = 1,
}, {
.name = "d-link:blue:wps",
.gpio = DIR_300B_GPIO_LED_WPS,
.active_low = 1,
}
};
static struct gpio_button dir_300b_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.threshold = 3,
.gpio = DIR_300B_GPIO_BUTTON_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.threshold = 3,
.gpio = DIR_300B_GPIO_BUTTON_WPS,
.active_low = 1,
}
};
static void __init dir_300b_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_register_flash(0, &dir_300b_flash_data);
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_300b_leds_gpio),
dir_300b_leds_gpio);
ramips_register_gpio_buttons(-1, DIR_300B_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(dir_300b_gpio_buttons),
dir_300b_gpio_buttons);
rt305x_register_wifi();
rt305x_register_wdt();
}
MIPS_MACHINE(RAMIPS_MACH_DIR_300_B1, "DIR-300-B1", "D-Link DIR-300 B1",
dir_300b_init);
MIPS_MACHINE(RAMIPS_MACH_DIR_600_B1, "DIR-600-B1", "D-Link DIR-600 B1",
dir_300b_init);
MIPS_MACHINE(RAMIPS_MACH_DIR_600_B2, "DIR-600-B2", "D-Link DIR-600 B2",
dir_300b_init);
|
