diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c')
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c | 241 |
1 files changed, 0 insertions, 241 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c deleted file mode 100644 index 9c4c1a8..0000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * D-Link DIR-825 rev. C1 board support - * - * Copyright (C) 2013 Alexander Stadler - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define DIR825C1_GPIO_LED_BLUE_USB 11 -#define DIR825C1_GPIO_LED_AMBER_POWER 14 -#define DIR825C1_GPIO_LED_BLUE_POWER 22 -#define DIR825C1_GPIO_LED_BLUE_WPS 15 -#define DIR825C1_GPIO_LED_AMBER_PLANET 19 -#define DIR825C1_GPIO_LED_BLUE_PLANET 18 -#define DIR825C1_GPIO_LED_WLAN_2G 13 - -#define DIR825C1_GPIO_WAN_LED_ENABLE 20 - -#define DIR825C1_GPIO_BTN_RESET 17 -#define DIR825C1_GPIO_BTN_WPS 16 - -#define DIR825C1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DIR825C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825C1_KEYS_POLL_INTERVAL) - -#define DIR825C1_MAC0_OFFSET 0x4 -#define DIR825C1_MAC1_OFFSET 0x18 -#define DIR825C1_WMAC_CALDATA_OFFSET 0x1000 -#define DIR825C1_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led dir825c1_leds_gpio[] __initdata = { - { - .name = "d-link:blue:usb", - .gpio = DIR825C1_GPIO_LED_BLUE_USB, - .active_low = 1, - }, - { - .name = "d-link:amber:power", - .gpio = DIR825C1_GPIO_LED_AMBER_POWER, - .active_low = 1, - }, - { - .name = "d-link:blue:power", - .gpio = DIR825C1_GPIO_LED_BLUE_POWER, - .active_low = 1, - }, - { - .name = "d-link:blue:wps", - .gpio = DIR825C1_GPIO_LED_BLUE_WPS, - .active_low = 1, - }, - { - .name = "d-link:amber:planet", - .gpio = DIR825C1_GPIO_LED_AMBER_PLANET, - .active_low = 1, - }, - { - .name = "d-link:blue:wlan2g", - .gpio = DIR825C1_GPIO_LED_WLAN_2G, - .active_low = 1, - }, -}; - -static struct gpio_led dir835a1_leds_gpio[] __initdata = { - { - .name = "d-link:amber:power", - .gpio = DIR825C1_GPIO_LED_AMBER_POWER, - .active_low = 1, - }, - { - .name = "d-link:green:power", - .gpio = DIR825C1_GPIO_LED_BLUE_POWER, - .active_low = 1, - }, - { - .name = "d-link:blue:wps", - .gpio = DIR825C1_GPIO_LED_BLUE_WPS, - .active_low = 1, - }, - { - .name = "d-link:amber:planet", - .gpio = DIR825C1_GPIO_LED_AMBER_PLANET, - .active_low = 1, - }, - { - .name = "d-link:green:planet", - .gpio = DIR825C1_GPIO_LED_BLUE_PLANET, - .active_low = 1, - }, -}; - -static struct gpio_keys_button dir825c1_gpio_keys[] __initdata = { - { - .desc = "Soft reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR825C1_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR825C1_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg dir825c1_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_led_cfg dir825c1_ar8327_led_cfg = { - .led_ctrl0 = 0x00000000, - .led_ctrl1 = 0xc737c737, - .led_ctrl2 = 0x00000000, - .led_ctrl3 = 0x00c30c00, - .open_drain = true, -}; - -static struct ar8327_platform_data dir825c1_ar8327_data = { - .pad0_cfg = &dir825c1_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &dir825c1_ar8327_led_cfg, -}; - -static struct mdio_board_info dir825c1_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .phy_addr = 0, - .platform_data = &dir825c1_ar8327_data, - }, -}; - -static void __init dir825c1_generic_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 mac0[ETH_ALEN], mac1[ETH_ALEN]; - u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN]; - - ath79_parse_ascii_mac(mac + DIR825C1_MAC0_OFFSET, mac0); - ath79_parse_ascii_mac(mac + DIR825C1_MAC1_OFFSET, mac1); - - ath79_register_m25p80(NULL); - - ath79_register_gpio_keys_polled(-1, DIR825C1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir825c1_gpio_keys), - dir825c1_gpio_keys); - - ath79_init_mac(wmac0, mac0, 0); - ath79_register_wmac(art + DIR825C1_WMAC_CALDATA_OFFSET, wmac0); - - ath79_init_mac(wmac1, mac1, 1); - ap91_pci_init(art + DIR825C1_PCIE_CALDATA_OFFSET, wmac1); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - - mdiobus_register_board_info(dir825c1_mdio0_info, - ARRAY_SIZE(dir825c1_mdio0_info)); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0); - - /* GMAC0 is connected to an AR8327N switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); - - ath79_register_usb(); -} - -static void __init dir825c1_setup(void) -{ - ath79_gpio_output_select(DIR825C1_GPIO_LED_BLUE_USB, - AR934X_GPIO_OUT_GPIO); - - gpio_request_one(DIR825C1_GPIO_WAN_LED_ENABLE, - GPIOF_OUT_INIT_LOW, "WAN LED enable"); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825c1_leds_gpio), - dir825c1_leds_gpio); - - ap9x_pci_setup_wmac_led_pin(0, 0); - - dir825c1_generic_setup(); -} - -static void __init dir835a1_setup(void) -{ - dir825c1_ar8327_data.led_cfg = NULL; - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dir835a1_leds_gpio), - dir835a1_leds_gpio); - - dir825c1_generic_setup(); -} - -MIPS_MACHINE(ATH79_MACH_DIR_825_C1, "DIR-825-C1", - "D-Link DIR-825 rev. C1", - dir825c1_setup); - -MIPS_MACHINE(ATH79_MACH_DIR_835_A1, "DIR-835-A1", - "D-Link DIR-835 rev. A1", - dir835a1_setup); |