diff options
Diffstat (limited to 'target/linux/at91/image/dfboot')
29 files changed, 0 insertions, 15408 deletions
diff --git a/target/linux/at91/image/dfboot/Makefile b/target/linux/at91/image/dfboot/Makefile deleted file mode 100644 index 91a603d..0000000 --- a/target/linux/at91/image/dfboot/Makefile +++ /dev/null @@ -1,35 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/kernel.mk - -PKG_NAME:=dfboot -PKG_VERSION:=0.1 -PKG_RELEASE:=1 - -PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME) - -include $(INCLUDE_DIR)/package.mk - -define Build/Prepare - mkdir -p $(PKG_BUILD_DIR) - $(CP) ./src/* $(PKG_BUILD_DIR)/ -endef - -define Build/Compile - $(MAKE) -C $(PKG_BUILD_DIR) \ - $(TARGET_CONFIGURE_OPTS) \ - CFLAGS="$(TARGET_CFLAGS)" \ - LDFLAGS="$(LIBGCC_S)" -endef - -define Build/InstallDev - dd if=$(PKG_BUILD_DIR)/binary/dfboot.bin of=$(PKG_BUILD_DIR)/binary/dfboot.block bs=32k count=1 conv=sync -endef - -$(eval $(call Build/DefaultTargets)) diff --git a/target/linux/at91/image/dfboot/src/Makefile b/target/linux/at91/image/dfboot/src/Makefile deleted file mode 100644 index ff92e0d..0000000 --- a/target/linux/at91/image/dfboot/src/Makefile +++ /dev/null @@ -1,94 +0,0 @@ -# Makefile for DataFlashBoot.bin -# Must use toolchain with H/W FLoating Point - -BASENAME=dfboot -BINNAME=$(BASENAME).bin -OUTNAME=$(BASENAME).out -LSSNAME=$(BASENAME).lss -MAPNAME=$(BASENAME).map - -BASENAME2=dfbptest -BINNAME2=$(BASENAME2).bin -OUTNAME2=$(BASENAME2).out -LSSNAME2=$(BASENAME2).lss -MAPNAME2=$(BASENAME2).map - -INCPATH=include - -CFLAGS_LOCAL=-Os -Wall -I$(INCPATH) -BUILD=$(CC) $(CFLAGS) $(CFLAGS_LOCAL) - -LDFLAGS+=-T elf32-littlearm.lds -Ttext 0 -LINK=$(LD) $(LDFLAGS) - -OBJS=objs/cstartup_ram.o objs/at45.o objs/com.o objs/dataflash.o\ - objs/div0.o objs/init.o objs/main.o objs/asm_isr.o objs/asm_mci_isr.o\ - objs/mci_device.o objs/jump.o objs/_udivsi3.o objs/_umodsi3.o - -OBJS2=objs/cstartup_ram.o objs/at45.o objs/com.o objs/dataflash.o\ - objs/div0.o objs/init.o objs/ptmain.o objs/asm_isr.o objs/asm_mci_isr.o\ - objs/mci_device.o objs/jump.o objs/_udivsi3.o objs/_umodsi3.o - -I=config.h com.h dataflash.h embedded_services.h main.h stdio.h include/AT91RM9200.h include/lib_AT91RM9200.h - -all:clean $(BASENAME) $(BASENAME2) - -$(BASENAME): $(OBJS) - $(LINK) -n -o $(OUTNAME) $(OBJS) - $(OBJCOPY) $(OUTNAME) -O binary $(BINNAME) - $(OBJDUMP) -h -s $(OUTNAME) > $(LSSNAME) - $(NM) -n $(OUTNAME) | grep -v '\( [aUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $(MAPNAME) - cp $(BINNAME) binary - -$(BASENAME2): $(OBJS2) - $(LINK) -n -o $(OUTNAME2) $(OBJS2) - $(OBJCOPY) $(OUTNAME2) -O binary $(BINNAME2) - $(OBJDUMP) -h -s $(OUTNAME2) > $(LSSNAME2) - $(NM) -n $(OUTNAME2) | grep -v '\( [aUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $(MAPNAME2) - cp $(BINNAME2) binary - -# C objects here -objs/at45.o: at45.c $(I) - $(BUILD) -c -o objs/at45.o at45.c -objs/com.o: com.c $(I) - $(BUILD) -c -o objs/com.o com.c -objs/dataflash.o: dataflash.c $(I) - $(BUILD) -c -o objs/dataflash.o dataflash.c -objs/mci_device.o: mci_device.c $(I) - $(BUILD) -c -o objs/mci_device.o mci_device.c -objs/div0.o: div0.c $(I) - $(BUILD) -c -o objs/div0.o div0.c -objs/init.o: init.c $(I) - $(BUILD) -c -o objs/init.o init.c -objs/main.o: main.c $(I) - $(BUILD) -c -o objs/main.o main.c -objs/ptmain.o: main.c $(I) - $(BUILD) -c -D PRODTEST -o objs/ptmain.o main.c - -# ASM objects here -objs/asm_isr.o: asm_isr.S - $(BUILD) -c -o objs/asm_isr.o asm_isr.S -objs/asm_mci_isr.o: asm_mci_isr.S - $(BUILD) -c -o objs/asm_mci_isr.o asm_mci_isr.S -objs/cstartup_ram.o: cstartup_ram.S - $(BUILD) -c -o objs/cstartup_ram.o cstartup_ram.S -objs/jump.o: jump.S - $(BUILD) -c -o objs/jump.o jump.S -objs/_udivsi3.o: _udivsi3.S - $(BUILD) -c -o objs/_udivsi3.o _udivsi3.S -objs/_umodsi3.o: _umodsi3.S - $(BUILD) -c -o objs/_umodsi3.o _umodsi3.S - -install: $(BINNAME) $(BINNAME2) - cp $(BINNAME) binary - cp $(BINNAME2) binary - -clean: - rm -f *~ - rm -f objs/* - rm -f *.out - rm -f *.bin - rm -f *.lss - rm -f *.map - rm -f .unpacked - mkdir -p objs diff --git a/target/linux/at91/image/dfboot/src/_udivsi3.S b/target/linux/at91/image/dfboot/src/_udivsi3.S deleted file mode 100644 index 2cdcd48..0000000 --- a/target/linux/at91/image/dfboot/src/_udivsi3.S +++ /dev/null @@ -1,77 +0,0 @@ -/* # 1 "libgcc1.S" */ -@ libgcc1 routines for ARM cpu. -@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) -dividend .req r0 -divisor .req r1 -result .req r2 -curbit .req r3 -/* ip .req r12 */ -/* sp .req r13 */ -/* lr .req r14 */ -/* pc .req r15 */ - .text - .globl __udivsi3 - .type __udivsi3 ,function - .align 0 - __udivsi3 : - cmp divisor, #0 - beq Ldiv0 - mov curbit, #1 - mov result, #0 - cmp dividend, divisor - bcc Lgot_result -Loop1: - @ Unless the divisor is very big, shift it up in multiples of - @ four bits, since this is the amount of unwinding in the main - @ division loop. Continue shifting until the divisor is - @ larger than the dividend. - cmp divisor, #0x10000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #4 - movcc curbit, curbit, lsl #4 - bcc Loop1 -Lbignum: - @ For very big divisors, we must shift it a bit at a time, or - @ we will be in danger of overflowing. - cmp divisor, #0x80000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #1 - movcc curbit, curbit, lsl #1 - bcc Lbignum -Loop3: - @ Test for possible subtractions, and note which bits - @ are done in the result. On the final pass, this may subtract - @ too much from the dividend, but the result will be ok, since the - @ "bit" will have been shifted out at the bottom. - cmp dividend, divisor - subcs dividend, dividend, divisor - orrcs result, result, curbit - cmp dividend, divisor, lsr #1 - subcs dividend, dividend, divisor, lsr #1 - orrcs result, result, curbit, lsr #1 - cmp dividend, divisor, lsr #2 - subcs dividend, dividend, divisor, lsr #2 - orrcs result, result, curbit, lsr #2 - cmp dividend, divisor, lsr #3 - subcs dividend, dividend, divisor, lsr #3 - orrcs result, result, curbit, lsr #3 - cmp dividend, #0 @ Early termination? - movnes curbit, curbit, lsr #4 @ No, any more bits to do? - movne divisor, divisor, lsr #4 - bne Loop3 -Lgot_result: - mov r0, result - mov pc, lr -Ldiv0: - str lr, [sp, #-4]! - bl __div0 (PLT) - mov r0, #0 @ about as wrong as it could be - ldmia sp!, {pc} - .size __udivsi3 , . - __udivsi3 -/* # 235 "libgcc1.S" */ -/* # 320 "libgcc1.S" */ -/* # 421 "libgcc1.S" */ -/* # 433 "libgcc1.S" */ -/* # 456 "libgcc1.S" */ -/* # 500 "libgcc1.S" */ -/* # 580 "libgcc1.S" */ diff --git a/target/linux/at91/image/dfboot/src/_umodsi3.S b/target/linux/at91/image/dfboot/src/_umodsi3.S deleted file mode 100644 index e4aebe8..0000000 --- a/target/linux/at91/image/dfboot/src/_umodsi3.S +++ /dev/null @@ -1,88 +0,0 @@ -/* # 1 "libgcc1.S" */ -@ libgcc1 routines for ARM cpu. -@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) -/* # 145 "libgcc1.S" */ -dividend .req r0 -divisor .req r1 -overdone .req r2 -curbit .req r3 -/* ip .req r12 */ -/* sp .req r13 */ -/* lr .req r14 */ -/* pc .req r15 */ - .text - .globl __umodsi3 - .type __umodsi3 ,function - .align 0 - __umodsi3 : - cmp divisor, #0 - beq Ldiv0 - mov curbit, #1 - cmp dividend, divisor - movcc pc, lr -Loop1: - @ Unless the divisor is very big, shift it up in multiples of - @ four bits, since this is the amount of unwinding in the main - @ division loop. Continue shifting until the divisor is - @ larger than the dividend. - cmp divisor, #0x10000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #4 - movcc curbit, curbit, lsl #4 - bcc Loop1 -Lbignum: - @ For very big divisors, we must shift it a bit at a time, or - @ we will be in danger of overflowing. - cmp divisor, #0x80000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #1 - movcc curbit, curbit, lsl #1 - bcc Lbignum -Loop3: - @ Test for possible subtractions. On the final pass, this may - @ subtract too much from the dividend, so keep track of which - @ subtractions are done, we can fix them up afterwards... - mov overdone, #0 - cmp dividend, divisor - subcs dividend, dividend, divisor - cmp dividend, divisor, lsr #1 - subcs dividend, dividend, divisor, lsr #1 - orrcs overdone, overdone, curbit, ror #1 - cmp dividend, divisor, lsr #2 - subcs dividend, dividend, divisor, lsr #2 - orrcs overdone, overdone, curbit, ror #2 - cmp dividend, divisor, lsr #3 - subcs dividend, dividend, divisor, lsr #3 - orrcs overdone, overdone, curbit, ror #3 - mov ip, curbit - cmp dividend, #0 @ Early termination? - movnes curbit, curbit, lsr #4 @ No, any more bits to do? - movne divisor, divisor, lsr #4 - bne Loop3 - @ Any subtractions that we should not have done will be recorded in - @ the top three bits of "overdone". Exactly which were not needed - @ are governed by the position of the bit, stored in ip. - @ If we terminated early, because dividend became zero, - @ then none of the below will match, since the bit in ip will not be - @ in the bottom nibble. - ands overdone, overdone, #0xe0000000 - moveq pc, lr @ No fixups needed - tst overdone, ip, ror #3 - addne dividend, dividend, divisor, lsr #3 - tst overdone, ip, ror #2 - addne dividend, dividend, divisor, lsr #2 - tst overdone, ip, ror #1 - addne dividend, dividend, divisor, lsr #1 - mov pc, lr -Ldiv0: - str lr, [sp, #-4]! - bl __div0 (PLT) - mov r0, #0 @ about as wrong as it could be - ldmia sp!, {pc} - .size __umodsi3 , . - __umodsi3 -/* # 320 "libgcc1.S" */ -/* # 421 "libgcc1.S" */ -/* # 433 "libgcc1.S" */ -/* # 456 "libgcc1.S" */ -/* # 500 "libgcc1.S" */ -/* # 580 "libgcc1.S" */ diff --git a/target/linux/at91/image/dfboot/src/asm_isr.S b/target/linux/at91/image/dfboot/src/asm_isr.S deleted file mode 100644 index 8d1d52e..0000000 --- a/target/linux/at91/image/dfboot/src/asm_isr.S +++ /dev/null @@ -1,75 +0,0 @@ -#include "AT91RM9200_inc.h" - -#define ARM_MODE_USER 0x10 -#define ARM_MODE_FIQ 0x11 -#define ARM_MODE_IRQ 0x12 -#define ARM_MODE_SVC 0x13 -#define ARM_MODE_ABORT 0x17 -#define ARM_MODE_UNDEF 0x1B -#define ARM_MODE_SYS 0x1F - -#define I_BIT 0x80 -#define F_BIT 0x40 -#define T_BIT 0x20 - - -/* ----------------------------------------------------------------------------- - AT91F_ASM_SPI_Handler - --------------------- - Handler called by the AIC - - Save context - Call C handler - Restore context - ----------------------------------------------------------------------------- */ - -.global AT91F_ST_ASM_HANDLER - -AT91F_ST_ASM_HANDLER: -/* Adjust and save LR_irq in IRQ stack */ - sub r14, r14, #4 - stmfd sp!, {r14} - -/* Write in the IVR to support Protect Mode - No effect in Normal Mode - De-assert the NIRQ and clear the source in Protect Mode */ - ldr r14, =AT91C_BASE_AIC - str r14, [r14, #AIC_IVR] - -/* Save SPSR and r0 in IRQ stack */ - mrs r14, SPSR - stmfd sp!, {r0, r14} - -/* Enable Interrupt and Switch in SYS Mode */ - mrs r0, CPSR - bic r0, r0, #I_BIT - orr r0, r0, #ARM_MODE_SYS - msr CPSR_c, r0 - -/* Save scratch/used registers and LR in User Stack */ - stmfd sp!, { r1-r3, r12, r14} - - ldr r1, =AT91F_ST_HANDLER - mov r14, pc - bx r1 - -/* Restore scratch/used registers and LR from User Stack */ - ldmia sp!, { r1-r3, r12, r14} - -/* Disable Interrupt and switch back in IRQ mode */ - mrs r0, CPSR - bic r0, r0, #ARM_MODE_SYS - orr r0, r0, #I_BIT | ARM_MODE_IRQ - msr CPSR_c, r0 - -/* Mark the End of Interrupt on the AIC */ - ldr r0, =AT91C_BASE_AIC - str r0, [r0, #AIC_EOICR] - -/* Restore SPSR_irq and r0 from IRQ stack */ - ldmia sp!, {r0, r14} - msr SPSR_cxsf, r14 - -/* Restore adjusted LR_irq from IRQ stack directly in the PC */ - ldmia sp!, {pc}^ - diff --git a/target/linux/at91/image/dfboot/src/asm_mci_isr.S b/target/linux/at91/image/dfboot/src/asm_mci_isr.S deleted file mode 100644 index 0f66fc0..0000000 --- a/target/linux/at91/image/dfboot/src/asm_mci_isr.S +++ /dev/null @@ -1,75 +0,0 @@ -#include <AT91RM9200_inc.h> - -#define ARM_MODE_USER 0x10 -#define ARM_MODE_FIQ 0x11 -#define ARM_MODE_IRQ 0x12 -#define ARM_MODE_SVC 0x13 -#define ARM_MODE_ABORT 0x17 -#define ARM_MODE_UNDEF 0x1B -#define ARM_MODE_SYS 0x1F - -#define I_BIT 0x80 -#define F_BIT 0x40 -#define T_BIT 0x20 - - -/* ----------------------------------------------------------------------------- - AT91F_ASM_MCI_Handler - --------------------- - Handler called by the AIC - - Save context - Call C handler - Restore context - ----------------------------------------------------------------------------- */ - -.global AT91F_ASM_MCI_Handler - -AT91F_ASM_MCI_Handler: -/* Adjust and save LR_irq in IRQ stack */ - sub r14, r14, #4 - stmfd sp!, {r14} - -/* Write in the IVR to support Protect Mode - No effect in Normal Mode - De-assert the NIRQ and clear the source in Protect Mode */ - ldr r14, =AT91C_BASE_AIC - str r14, [r14, #AIC_IVR] - -/* Save SPSR and r0 in IRQ stack */ - mrs r14, SPSR - stmfd sp!, {r0, r14} - -/* Enable Interrupt and Switch in SYS Mode */ - mrs r0, CPSR - bic r0, r0, #I_BIT - orr r0, r0, #ARM_MODE_SYS - msr CPSR_c, r0 - -/* Save scratch/used registers and LR in User Stack */ - stmfd sp!, { r1-r3, r12, r14} - - ldr r1, =AT91F_MCI_Handler - mov r14, pc - bx r1 - -/* Restore scratch/used registers and LR from User Stack */ - ldmia sp!, { r1-r3, r12, r14} - -/* Disable Interrupt and switch back in IRQ mode */ - mrs r0, CPSR - bic r0, r0, #ARM_MODE_SYS - orr r0, r0, #I_BIT | ARM_MODE_IRQ - msr CPSR_c, r0 - -/* Mark the End of Interrupt on the AIC */ - ldr r0, =AT91C_BASE_AIC - str r0, [r0, #AIC_EOICR] - -/* Restore SPSR_irq and r0 from IRQ stack */ - ldmia sp!, {r0, r14} - msr SPSR_cxsf, r14 - -/* Restore adjusted LR_irq from IRQ stack directly in the PC */ - ldmia sp!, {pc}^ - diff --git a/target/linux/at91/image/dfboot/src/at45.c b/target/linux/at91/image/dfboot/src/at45.c deleted file mode 100644 index 8830d7e..0000000 --- a/target/linux/at91/image/dfboot/src/at45.c +++ /dev/null @@ -1,595 +0,0 @@ -/*---------------------------------------------------------------------------- - * ATMEL Microcontroller Software Support - ROUSSET - - *---------------------------------------------------------------------------- - * The software is delivered "AS IS" without warranty or condition of any - * kind, either express, implied or statutory. This includes without - * limitation any warranty or condition with respect to merchantability or - * fitness for any particular purpose, or against the infringements of - * intellectual property rights of others. - *---------------------------------------------------------------------------- - * File Name : at45c.h - * Object : - * - * 1.0 10/12/03 HIi : Creation. - * 1.01 03/05/04 HIi : Bug Fix in AT91F_DataFlashWaitReady() Function. - *---------------------------------------------------------------------------- - */ -#include "config.h" -#include "stdio.h" -#include "AT91RM9200.h" -#include "lib_AT91RM9200.h" -#include "dataflash.h" -#include "main.h" - - -/*----------------------------------------------------------------------------*/ -/* \fn AT91F_SpiInit */ -/* \brief SPI Low level Init */ -/*----------------------------------------------------------------------------*/ -void AT91F_SpiInit(void) { - /* Configure PIOs */ - AT91C_BASE_PIOA->PIO_ASR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | - AT91C_PA1_MOSI | AT91C_PA5_NPCS2 | - AT91C_PA6_NPCS3 | AT91C_PA0_MISO | - AT91C_PA2_SPCK; - AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | - AT91C_PA1_MOSI | AT91C_PA5_NPCS2 | - AT91C_PA6_NPCS3 | AT91C_PA0_MISO | - AT91C_PA2_SPCK; - /* Enable CLock */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI; - - /* Reset the SPI */ - AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST; - - /* Configure SPI in Master Mode with No CS selected !!! */ - AT91C_BASE_SPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS; - - /* Configure CS0 and CS3 */ - *(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | - (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | - ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); - *(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | - (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | - ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); -} - - -/*----------------------------------------------------------------------------*/ -/* \fn AT91F_SpiEnable */ -/* \brief Enable SPI chip select */ -/*----------------------------------------------------------------------------*/ -static void AT91F_SpiEnable(int cs) { - switch(cs) { - case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ - AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF; - AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS0_SERIAL_DATAFLASH << 16) & AT91C_SPI_PCS); - break; - case 3: /* Configure SPI CS3 for Serial DataFlash Card */ - /* Set up PIO SDC_TYPE to switch on DataFlash Card and not MMC/SDCard */ - AT91C_BASE_PIOB->PIO_PER = AT91C_PIO_PB7; /* Set in PIO mode */ - AT91C_BASE_PIOB->PIO_OER = AT91C_PIO_PB7; /* Configure in output */ - /* Clear Output */ - AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7; - /* Configure PCS */ - AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF; - AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS); - break; - } - - /* SPI_Enable */ - AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN; -} - -/*----------------------------------------------------------------------------*/ -/* \fn AT91F_SpiWrite */ -/* \brief Set the PDC registers for a transfert */ -/*----------------------------------------------------------------------------*/ -static unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) -{ - unsigned int timeout; - - AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; - - /* Initialize the Transmit and Receive Pointer */ - AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ; - AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ; - - /* Intialize the Transmit and Receive Counters */ - AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size; - AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size; - - if ( pDesc->tx_data_size != 0 ) { - /* Initialize the Next Transmit and Next Receive Pointer */ - AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ; - AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ; - - /* Intialize the Next Transmit and Next Receive Counters */ - AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ; - AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ; - } - - /* ARM simple, non interrupt dependent timer */ - timeout = 0; - - AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN; - while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF)); - - AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; - - if (timeout >= AT91C_DATAFLASH_TIMEOUT){ - return AT91C_DATAFLASH_ERROR; - } - - return AT91C_DATAFLASH_OK; -} - - -/*----------------------------------------------------------------------*/ -/* \fn AT91F_DataFlashSendCommand */ -/* \brief Generic function to send a command to the dataflash */ -/*----------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_DataFlashSendCommand( - AT91PS_DataFlash pDataFlash, - unsigned char OpCode, - unsigned int CmdSize, - unsigned int DataflashAddress) -{ - unsigned int adr; - - /* process the address to obtain page address and byte address */ - adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) - << pDataFlash->pDevice->page_offset) + - (DataflashAddress % (pDataFlash->pDevice->pages_size)); - - /* fill the command buffer */ - pDataFlash->pDataFlashDesc->command[0] = OpCode; - if (pDataFlash->pDevice->pages_number >= 16384) - { - pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x0F000000) >> 24); - pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x00FF0000) >> 16); - pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((adr & 0x0000FF00) >> 8); - pDataFlash->pDataFlashDesc->command[4] = (unsigned char)(adr & 0x000000FF); - } - else - { - pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x00FF0000) >> 16); - pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x0000FF00) >> 8); - pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(adr & 0x000000FF) ; - pDataFlash->pDataFlashDesc->command[4] = 0; - } - pDataFlash->pDataFlashDesc->command[5] = 0; - pDataFlash->pDataFlashDesc->command[6] = 0; - pDataFlash->pDataFlashDesc->command[7] = 0; - - /* Initialize the SpiData structure for the spi write fuction */ - pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command ; - pDataFlash->pDataFlashDesc->tx_cmd_size = CmdSize ; - pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command ; - pDataFlash->pDataFlashDesc->rx_cmd_size = CmdSize ; - - return AT91F_SpiWrite(pDataFlash->pDataFlashDesc); -} - - -/*----------------------------------------------------------------------*/ -/* \fn AT91F_DataFlashGetStatus */ -/* \brief Read the status register of the dataflash */ -/*----------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc) -{ - AT91S_DataFlashStatus status; - - /* first send the read status command (D7H) */ - pDesc->command[0] = DB_STATUS; - pDesc->command[1] = 0; - - pDesc->DataFlash_state = GET_STATUS; - pDesc->tx_data_size = 0 ; /* Transmit the command and receive response */ - pDesc->tx_cmd_pt = pDesc->command ; - pDesc->rx_cmd_pt = pDesc->command ; - pDesc->rx_cmd_size = 2 ; - pDesc->tx_cmd_size = 2 ; - status = AT91F_SpiWrite (pDesc); - - pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1); - return status; -} - -/*----------------------------------------------------------------------------- - * Function Name : AT91F_DataFlashWaitReady - * Object : wait for dataflash ready (bit7 of the status register == 1) - * Input Parameters : DataFlash Service and timeout - * Return value : DataFlash status "ready or not" - *----------------------------------------------------------------------------- - */ -static AT91S_DataFlashStatus AT91F_DataFlashWaitReady( - AT91PS_DataflashDesc pDataFlashDesc, - unsigned int timeout) -{ - pDataFlashDesc->DataFlash_state = IDLE; - do { - AT91F_DataFlashGetStatus(pDataFlashDesc); - timeout--; - } - while(((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && (timeout > 0)); - - if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) - return AT91C_DATAFLASH_ERROR; - - return AT91C_DATAFLASH_OK; -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataFlashContinuousRead */ -/* Object : Continuous stream Read */ -/* Input Parameters : DataFlash Service */ -/* : <src> = dataflash address */ -/* : <*dataBuffer> = data buffer pointer */ -/* : <sizeToRead> = data buffer size */ -/* Return value : State of the dataflash */ -/*------------------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_DataFlashContinuousRead( - AT91PS_DataFlash pDataFlash, - int src, - unsigned char *dataBuffer, - int sizeToRead ) -{ - AT91S_DataFlashStatus status; - /* Test the size to read in the device */ - if ( (src + sizeToRead) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number))) - return AT91C_DATAFLASH_MEMORY_OVERFLOW; - - pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer; - pDataFlash->pDataFlashDesc->rx_data_size = sizeToRead; - pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer; - pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead; - - status = AT91F_DataFlashSendCommand(pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src); - /* Send the command to the dataflash */ - return(status); -} - - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_MainMemoryToBufferTransfer */ -/* Object : Read a page in the SRAM Buffer 1 or 2 */ -/* Input Parameters : DataFlash Service */ -/* : Page concerned */ -/* : */ -/* Return value : State of the dataflash */ -/*------------------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfer( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned int page) -{ - int cmdsize; - /* Test if the buffer command is legal */ - if ((BufferCommand != DB_PAGE_2_BUF1_TRF) && (BufferCommand != DB_PAGE_2_BUF2_TRF)) - return AT91C_DATAFLASH_BAD_COMMAND; - - /* no data to transmit or receive */ - pDataFlash->pDataFlashDesc->tx_data_size = 0; - cmdsize = 4; - if (pDataFlash->pDevice->pages_number >= 16384) - cmdsize = 5; - return(AT91F_DataFlashSendCommand(pDataFlash, BufferCommand, cmdsize, - page*pDataFlash->pDevice->pages_size)); -} - - - -/*----------------------------------------------------------------------------- */ -/* Function Name : AT91F_DataFlashWriteBuffer */ -/* Object : Write data to the internal sram buffer 1 or 2 */ -/* Input Parameters : DataFlash Service */ -/* : <BufferCommand> = command to write buffer1 or buffer2 */ -/* : <*dataBuffer> = data buffer to write */ -/* : <bufferAddress> = address in the internal buffer */ -/* : <SizeToWrite> = data buffer size */ -/* Return value : State of the dataflash */ -/*------------------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned char *dataBuffer, - unsigned int bufferAddress, - int SizeToWrite ) -{ - int cmdsize; - /* Test if the buffer command is legal */ - if ((BufferCommand != DB_BUF1_WRITE) && (BufferCommand != DB_BUF2_WRITE)) - return AT91C_DATAFLASH_BAD_COMMAND; - - /* buffer address must be lower than page size */ - if (bufferAddress > pDataFlash->pDevice->pages_size) - return AT91C_DATAFLASH_BAD_ADDRESS; - - /* Send first Write Command */ - pDataFlash->pDataFlashDesc->command[0] = BufferCommand; - pDataFlash->pDataFlashDesc->command[1] = 0; - if (pDataFlash->pDevice->pages_number >= 16384) - { - pDataFlash->pDataFlashDesc->command[2] = 0; - pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(((unsigned int)(bufferAddress & pDataFlash->pDevice->byte_mask)) >> 8) ; - pDataFlash->pDataFlashDesc->command[4] = (unsigned char)((unsigned int)bufferAddress & 0x00FF) ; - cmdsize = 5; - } - else - { - pDataFlash->pDataFlashDesc->command[2] = (unsigned char)(((unsigned int)(bufferAddress & pDataFlash->pDevice->byte_mask)) >> 8) ; - pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((unsigned int)bufferAddress & 0x00FF) ; - pDataFlash->pDataFlashDesc->command[4] = 0; - cmdsize = 4; - } - - pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command ; - pDataFlash->pDataFlashDesc->tx_cmd_size = cmdsize ; - pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command ; - pDataFlash->pDataFlashDesc->rx_cmd_size = cmdsize ; - - pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer ; - pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer ; - pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite ; - pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ; - - return AT91F_SpiWrite(pDataFlash->pDataFlashDesc); -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_PageErase */ -/* Object : Read a page in the SRAM Buffer 1 or 2 */ -/* Input Parameters : DataFlash Service */ -/* : Page concerned */ -/* : */ -/* Return value : State of the dataflash */ -/*------------------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_PageErase( - AT91PS_DataFlash pDataFlash, - unsigned int page) -{ - int cmdsize; - /* Test if the buffer command is legal */ - /* no data to transmit or receive */ - pDataFlash->pDataFlashDesc->tx_data_size = 0; - - cmdsize = 4; - if (pDataFlash->pDevice->pages_number >= 16384) - cmdsize = 5; - return(AT91F_DataFlashSendCommand(pDataFlash, DB_PAGE_ERASE, cmdsize, - page*pDataFlash->pDevice->pages_size)); -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_WriteBufferToMain */ -/* Object : Write buffer to the main memory */ -/* Input Parameters : DataFlash Service */ -/* : <BufferCommand> = command to send to buf1 or buf2 */ -/* : <dest> = main memory address */ -/* Return value : State of the dataflash */ -/*------------------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_WriteBufferToMain ( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned int dest ) -{ - int cmdsize; - /* Test if the buffer command is correct */ - if ((BufferCommand != DB_BUF1_PAGE_PGM) && - (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) && - (BufferCommand != DB_BUF2_PAGE_PGM) && - (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) ) - return AT91C_DATAFLASH_BAD_COMMAND; - - /* no data to transmit or receive */ - pDataFlash->pDataFlashDesc->tx_data_size = 0; - - cmdsize = 4; - if (pDataFlash->pDevice->pages_number >= 16384) - cmdsize = 5; - /* Send the command to the dataflash */ - return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, dest)); -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_PartialPageWrite */ -/* Object : Erase partially a page */ -/* Input Parameters : <page> = page number */ -/* : <AdrInpage> = adr to begin the fading */ -/* : <length> = Number of bytes to erase */ -/*------------------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_PartialPageWrite ( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - unsigned int dest, - unsigned int size) -{ - unsigned int page; - unsigned int AdrInPage; - - page = dest / (pDataFlash->pDevice->pages_size); - AdrInPage = dest % (pDataFlash->pDevice->pages_size); - - /* Read the contents of the page in the Sram Buffer */ - AT91F_MainMemoryToBufferTransfer(pDataFlash, DB_PAGE_2_BUF1_TRF, page); - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - - /*Update the SRAM buffer */ - AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, AdrInPage, size); - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - - /* Erase page if a 128 Mbits device */ - if (pDataFlash->pDevice->pages_number >= 16384) - { - AT91F_PageErase(pDataFlash, page); - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - } - - /* Rewrite the modified Sram Buffer in the main memory */ - return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, - (page*pDataFlash->pDevice->pages_size))); -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataFlashWrite */ -/* Object : */ -/* Input Parameters : <*src> = Source buffer */ -/* : <dest> = dataflash adress */ -/* : <size> = data buffer size */ -/*------------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_DataFlashWrite( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - int dest, - int size ) -{ - unsigned int length; - unsigned int page; - unsigned int status; - - AT91F_SpiEnable(pDataFlash->pDevice->cs); - - if ( (dest + size) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number))) - return AT91C_DATAFLASH_MEMORY_OVERFLOW; - - /* If destination does not fit a page start address */ - if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size))) != 0 ) { - length = pDataFlash->pDevice->pages_size - (dest % ((unsigned int)(pDataFlash->pDevice->pages_size))); - - if (size < length) - length = size; - - if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length)) - return AT91C_DATAFLASH_ERROR; - - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - - /* Update size, source and destination pointers */ - size -= length; - dest += length; - src += length; - } - - while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) - { - /* program dataflash page */ - page = (unsigned int)dest / (pDataFlash->pDevice->pages_size); - - status = AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, - 0, pDataFlash->pDevice->pages_size); - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - - status = AT91F_PageErase(pDataFlash, page); - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - if (!status) - return AT91C_DATAFLASH_ERROR; - - status = AT91F_WriteBufferToMain (pDataFlash, DB_BUF1_PAGE_PGM, dest); - if(!status) - return AT91C_DATAFLASH_ERROR; - - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - - /* Update size, source and destination pointers */ - size -= pDataFlash->pDevice->pages_size ; - dest += pDataFlash->pDevice->pages_size ; - src += pDataFlash->pDevice->pages_size ; - } - - /* If still some bytes to read */ - if ( size > 0 ) { - /* program dataflash page */ - if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) ) - return AT91C_DATAFLASH_ERROR; - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - } - return AT91C_DATAFLASH_OK; -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataFlashRead */ -/* Object : Read a block in dataflash */ -/* Input Parameters : */ -/* Return value : */ -/*------------------------------------------------------------------------------*/ -int AT91F_DataFlashRead( - AT91PS_DataFlash pDataFlash, - unsigned long addr, - unsigned long size, - char *buffer) -{ - unsigned long SizeToRead; - - AT91F_SpiEnable(pDataFlash->pDevice->cs); - - if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT) != AT91C_DATAFLASH_OK) - return -1; - - while (size) - { - SizeToRead = (size < 0x8000)? size:0x8000; - - if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT) - != AT91C_DATAFLASH_OK) - return -1; - - if (AT91F_DataFlashContinuousRead (pDataFlash, addr, (unsigned char *)buffer, - SizeToRead) != AT91C_DATAFLASH_OK) - return -1; - - size -= SizeToRead; - addr += SizeToRead; - buffer += SizeToRead; - } - - return AT91C_DATAFLASH_OK; -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataflashProbe */ -/* Object : */ -/* Input Parameters : */ -/* Return value : Dataflash status register */ -/*------------------------------------------------------------------------------*/ -int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc) -{ - AT91F_SpiEnable(cs); - AT91F_DataFlashGetStatus(pDesc); - return ((pDesc->command[1] == 0xFF)? 0: (pDesc->command[1] & 0x3C)); -} - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataFlashErase */ -/* Object : */ -/* Input Parameters : <*pDataFlash> = Device info */ -/*------------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_DataFlashErase(AT91PS_DataFlash pDataFlash) -{ - unsigned int page; - unsigned int status; - - AT91F_SpiEnable(pDataFlash->pDevice->cs); - - for(page=0; page < pDataFlash->pDevice->pages_number; page++) - { - /* Erase dataflash page */ - if ((page & 0x00FF) == 0) - printf("\rERA %d/%d", page, pDataFlash->pDevice->pages_number); - status = AT91F_PageErase(pDataFlash, page); - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - if (!status) - return AT91C_DATAFLASH_ERROR; - } - - return AT91C_DATAFLASH_OK; -} - diff --git a/target/linux/at91/image/dfboot/src/com.c b/target/linux/at91/image/dfboot/src/com.c deleted file mode 100644 index aacfb55..0000000 --- a/target/linux/at91/image/dfboot/src/com.c +++ /dev/null @@ -1,368 +0,0 @@ -/*---------------------------------------------------------------------------- - * ATMEL Microcontroller Software Support - ROUSSET - - *---------------------------------------------------------------------------- - * The software is delivered "AS IS" without warranty or condition of any - * kind, either express, implied or statutory. This includes without - * limitation any warranty or condition with respect to merchantability or - * fitness for any particular purpose, or against the infringements of - * intellectual property rights of others. - *---------------------------------------------------------------------------- - * File Name : com.c - * Object : - * Creation : HIi 03/27/2003 - * - *---------------------------------------------------------------------------- - */ -#include "AT91RM9200.h" -#include "lib_AT91RM9200.h" -#include "config.h" -#include "com.h" -#include "stdio.h" - -static char erase_seq[] = "\b \b"; /* erase sequence */ - -#define MAX_UARTS 1 - -//unsigned int usa[2] = {(unsigned int)AT91C_BASE_DBGU, (unsigned int)AT91C_ALTERNATE_USART}; -unsigned int usa[1] = {(unsigned int)AT91C_BASE_DBGU}; -unsigned int us; -int port_detected; - -void at91_init_uarts(void) -{ - int i; - - port_detected = 0; - AT91F_DBGU_CfgPIO(); - AT91F_US0_CfgPIO(); - AT91F_US0_CfgPMC(); - - for(i=0; i<MAX_UARTS; i++) { - us = usa[i]; - AT91F_US_ResetRx((AT91PS_USART)us); - AT91F_US_ResetTx((AT91PS_USART)us); - - // Configure DBGU - AT91F_US_Configure( - (AT91PS_USART)us, // DBGU base address - AT91C_MASTER_CLOCK, // 60 MHz - AT91C_US_ASYNC_MODE, // mode Register to be programmed - 115200, // baudrate to be programmed - 0 // timeguard to be programmed - ); - - // Enable Transmitter - AT91F_US_EnableTx((AT91PS_USART)us); - // Enable Receiver - AT91F_US_EnableRx((AT91PS_USART)us); - } - us = usa[0]; -} - -int at91_serial_putc(int ch) -{ - if (ch == '\n') - at91_serial_putc('\r'); - while (!AT91F_US_TxReady((AT91PS_USART)us)); - AT91F_US_PutChar((AT91PS_USART)us, (char)ch); - return ch; -} - -/* This getc is modified to be able work on more than one port. On certain - * boards (i.e. Figment Designs VersaLink), the debug port is not available - * once the unit is in it's enclosure, so, if one needs to get into dfboot - * for any reason it is impossible. With this getc, it scans between the debug - * port and another port and once it receives a character, it sets that port - * as the debug port. */ -int at91_serial_getc() -{ - while(1) { -#if 0 - if (!port_detected) { - if (us == usa[0]) { - us = usa[1]; - } - else { - us = usa[0]; - } - } -#endif - if(AT91F_US_RxReady((AT91PS_USART)us)) { -#if 0 - port_detected = 1; -#endif - return((int)AT91F_US_GetChar((AT91PS_USART)us)); - } - } -} - -/*----------------------------------------------------------------------------- - * Function Name : AT91F_ReadLine() - * Object : - * Input Parameters : - * Return value : - *----------------------------------------------------------------------------- - */ -int AT91F_ReadLine (const char *const prompt, char *console_buffer) -{ - char *p = console_buffer; - int n = 0; /* buffer index */ - int plen = strlen (prompt); /* prompt length */ - int col; /* output column cnt */ - char c; - - /* print prompt */ - if (prompt) - printf(prompt); - col = plen; - - for (;;) { - c = getc(); - - switch (c) { - case '\r': /* Enter */ - case '\n': - *p = '\0'; - puts ("\n"); - return (p - console_buffer); - - case 0x03: /* ^C - break */ - console_buffer[0] = '\0'; /* discard input */ - return (-1); - - case 0x08: /* ^H - backspace */ - case 0x7F: /* DEL - backspace */ - if (n) { - --p; - printf(erase_seq); - col--; - n--; - } - continue; - - default: - /* - * Must be a normal character then - */ - if (n < (AT91C_CB_SIZE -2)) - { - ++col; /* echo input */ - putc(c); - *p++ = c; - ++n; - } - else - { /* Buffer full */ - putc('\a'); - } - } - } -} - - -/*----------------------------------------------------------------------------- - * Function Name : AT91F_WaitKeyPressed() - * Object : - * Input Parameters : - * Return value : - *----------------------------------------------------------------------------- - */ -void AT91F_WaitKeyPressed(void) -{ - int c; - puts("KEY"); - c = getc(); - putc('\n'); -} - -int puts(const char *str) -{ - while(*str != 0) { - at91_serial_putc(*str); - str++; - } - return 1; -} - -int putc(int c) -{ - return at91_serial_putc(c); -} - -int putchar(c) -{ - return putc(c); -} - -int getc() -{ - return at91_serial_getc(); -} - -int strlen(const char *str) -{ - int len = 0; - - if(str == (char *)0) - return 0; - - while(*str++ != 0) - len++; - - return len; -} - -#define ZEROPAD 1 /* pad with zero */ -#define SIGN 2 /* unsigned/signed long */ -#define LEFT 4 /* left justified */ -#define LARGE 8 /* use 'ABCDEF' instead of 'abcdef' */ - -#define do_div(n,base) ({ \ - int __res; \ - __res = ((unsigned) n) % (unsigned) base; \ - n = ((unsigned) n) / (unsigned) base; \ - __res; \ -}) - -static int number(int num, int base, int size, - int precision, int type) -{ - char c, sign, tmp[66]; - const char *digits="0123456789ABCDEF"; - int i; - - if (type & LEFT) - type &= ~ZEROPAD; - if (base < 2 || base > 16) - return 0; - c = (type & ZEROPAD) ? '0' : ' '; - sign = 0; - - if(type & SIGN && num < 0) - { - sign = '-'; - num = -num; - size--; - } - - i = 0; - if(num == 0) - tmp[i++] = digits[0]; - else while(num != 0) - tmp[i++] = digits[do_div(num, base)]; - - if(i > precision) - precision = i; - size -= precision; - - if(!(type&(ZEROPAD+LEFT))) - while(size-->0) - putc(' '); - - if(sign) - putc(sign); - - if (!(type & LEFT)) - while (size-- > 0) - putc(c); - - while (i < precision--) - putc('0'); - - while (i-- > 0) - putc(tmp[i]); - - while (size-- > 0) - putc(' ');; - - return 1; -} - -int hvfprintf(const char *fmt, va_list va) -{ - char *s; - - do { - if(*fmt == '%') { - bool done = false; - - int type = 0; - int precision = 0; - - do { - fmt++; - switch(*fmt) { - case '0' : - if(!precision) - type |= ZEROPAD; - case '1' : - case '2' : - case '3' : - case '4' : - case '5' : - case '6' : - case '7' : - case '8' : - case '9' : - precision = precision * 10 + (*fmt - '0'); - break; - case '.' : - break; - case 's' : - s = va_arg(va, char *); - if(!s) - puts("<NULL>"); - else - puts(s); - done = true; - break; - case 'c' : - putc(va_arg(va, int)); - done = true; - break; - case 'd' : - number(va_arg(va, int), 10, 0, precision, type); - done = true; - break; - case 'x' : - case 'X' : - number(va_arg(va, int), 16, 0, precision, type); - done = true; - break; - case '%' : - putc(*fmt); - done = true; - default: - putc('%'); - putc(*fmt); - done = true; - break; - } - } while(!done); - } else if(*fmt == '\\') { - fmt++; - if(*fmt == 'r') { - putc('\r'); - } else if(*fmt == 'n') { - putc('\n'); - } - } else { - putc(*fmt); - } - fmt++; - } while(*fmt != 0); - - return 0; -} - -int printf(const char *fmt, ...) -{ - va_list ap; - int i; - - va_start(ap, fmt); - i = hvfprintf(fmt, ap); - va_end(ap); - - return i; -} diff --git a/target/linux/at91/image/dfboot/src/com.h b/target/linux/at91/image/dfboot/src/com.h deleted file mode 100644 index 7af09e4..0000000 --- a/target/linux/at91/image/dfboot/src/com.h +++ /dev/null @@ -1,28 +0,0 @@ -/*---------------------------------------------------------------------------- - * ATMEL Microcontroller Software Support - ROUSSET - - *---------------------------------------------------------------------------- - * The software is delivered "AS IS" without warranty or condition of any - * kind, either express, implied or statutory. This includes without - * limitation any warranty or condition with respect to merchantability or - * fitness for any particular purpose, or against the infringements of - * intellectual property rights of others. - *---------------------------------------------------------------------------- - * File Name : com.h - * Object : - * - * 1.0 27/03/03 HIi : Creation - *---------------------------------------------------------------------------- - */ -#ifndef com_h -#define com_h - -#define AT91C_CB_SIZE 20 /* size of the console buffer */ - -/* Escape sequences */ -#define ESC \033 - -extern int AT91F_ReadLine (const char *const prompt, char *console_buffer); -extern void AT91F_WaitKeyPressed(void); - -#endif - diff --git a/target/linux/at91/image/dfboot/src/config.h b/target/linux/at91/image/dfboot/src/config.h deleted file mode 100644 index 3be8d49..0000000 --- a/target/linux/at91/image/dfboot/src/config.h +++ /dev/null @@ -1,17 +0,0 @@ - -#ifndef _CONFIG_H -#define _CONFIG_H - -//#define PAGESZ_1056 1 -#undef PAGESZ_1056 -#define SPI_LOW_SPEED 1 -#define AT91C_DELAY_TO_BOOT 1500 - -#define CRC_RETRIES 0x100 - -#define AT91C_MASTER_CLOCK 59904000 -#define AT91C_BAUD_RATE 115200 - -#define AT91C_ALTERNATE_USART AT91C_BASE_US0 - -#endif diff --git a/target/linux/at91/image/dfboot/src/cstartup_ram.S b/target/linux/at91/image/dfboot/src/cstartup_ram.S deleted file mode 100644 index 2239000..0000000 --- a/target/linux/at91/image/dfboot/src/cstartup_ram.S +++ /dev/null @@ -1,144 +0,0 @@ -#include "AT91RM9200_inc.h" - -/*--------------------------- -ARM Core Mode and Status Bits ----------------------------*/ -.section start - .text - -#define ARM_MODE_USER 0x10 -#define ARM_MODE_FIQ 0x11 -#define ARM_MODE_IRQ 0x12 -#define ARM_MODE_SVC 0x13 -#define ARM_MODE_ABORT 0x17 -#define ARM_MODE_UNDEF 0x1B -#define ARM_MODE_SYS 0x1F - -#define I_BIT 0x80 -#define F_BIT 0x40 -#define T_BIT 0x20 - -/*---------------------------------------------------------------------------- - Area Definition ----------------- - Must be defined as function to put first in the code as it must be mapped - at offset 0 of the flash EBI_CSR0, ie. at address 0 before remap. -_---------------------------------------------------------------------------*/ - - .align 4 - .globl _start -_start: - -/*---------------------------------------------------------------------------- - Exception vectors ( before Remap ) ------------------------------------- - These vectors are read at address 0. - They absolutely requires to be in relative addresssing mode in order to - guarantee a valid jump. For the moment, all are just looping (what may be - dangerous in a final system). If an exception occurs before remap, this - would result in an infinite loop. -----------------------------------------------------------------------------*/ - b reset /* reset */ - b undefvec /* Undefined Instruction */ - b swivec /* Software Interrupt */ - b pabtvec /* Prefetch Abort */ - b dabtvec /* Data Abort */ - b rsvdvec /* reserved */ - b aicvec /* IRQ : read the AIC */ - b fiqvec /* FIQ */ - -undefvec: -swivec: -pabtvec: -dabtvec: -rsvdvec: -aicvec: -fiqvec: - b undefvec - -reset: - -#define MEMEND 0x00004000 - -/* ---------------------------- - Setup the stack for each mode ----------------------------- */ - -#define IRQ_STACK_SIZE 0x10 -#define FIQ_STACK_SIZE 0x04 -#define ABT_STACK_SIZE 0x04 -#define UND_STACK_SIZE 0x04 -#define SVC_STACK_SIZE 0x10 -#define USER_STACK_SIZE 0x400 - - ldr r0,= MEMEND - -/*- Set up Supervisor Mode and set Supervisor Mode Stack*/ - msr CPSR_c, #ARM_MODE_SVC | I_BIT | F_BIT - mov r13, r0 /* Init stack Undef*/ - sub r0, r0, #SVC_STACK_SIZE - -/*- Set up Interrupt Mode and set IRQ Mode Stack*/ - msr CPSR_c, #ARM_MODE_IRQ | I_BIT | F_BIT - mov r13, r0 /* Init stack IRQ*/ - sub r0, r0, #IRQ_STACK_SIZE - -/*- Set up Fast Interrupt Mode and set FIQ Mode Stack*/ - msr CPSR_c, #ARM_MODE_FIQ | I_BIT | F_BIT - mov r13, r0 /* Init stack FIQ*/ - sub r0, r0, #FIQ_STACK_SIZE - -/*- Set up Abort Mode and set Abort Mode Stack*/ - msr CPSR_c, #ARM_MODE_ABORT | I_BIT | F_BIT - mov r13, r0 /* Init stack Abort*/ - sub r0, r0, #ABT_STACK_SIZE - -/*- Set up Undefined Instruction Mode and set Undef Mode Stack*/ - msr CPSR_c, #ARM_MODE_UNDEF | I_BIT | F_BIT - mov r13, r0 /* Init stack Undef*/ - sub r0, r0, #UND_STACK_SIZE - -/*- Set up user Mode and set System Mode Stack*/ - msr CPSR_c, #ARM_MODE_SYS | I_BIT | F_BIT - bic r0, r0, #3 /* Insure word alignement */ - mov sp, r0 /* Init stack System */ - - - ldr r0, = AT91F_LowLevelInit - mov lr, pc - bx r0 - -/*---------------------------------------- - Read/modify/write CP15 control register -----------------------------------------*/ - mrc p15, 0, r0, c1, c0,0 /* read cp15 control registre (cp15 r1) in r0 */ - ldr r3,= 0xC0000080 /* Reset bit :Little Endian end fast bus mode */ - ldr r4,= 0xC0001000 /* Set bit :Asynchronous clock mode, Not Fast Bus, I-Cache enable */ - bic r0, r0, r3 - orr r0, r0, r4 - mcr p15, 0, r0, c1, c0,0 /* write r0 in cp15 control registre (cp15 r1) */ - -/* Enable interrupts */ - msr CPSR_c, #ARM_MODE_SYS | F_BIT - -/*------------------------------------------------------------------------------ -- Branch on C code Main function (with interworking) ----------------------------------------------------- -- Branch must be performed by an interworking call as either an ARM or Thumb -- _start function must be supported. This makes the code not position- -- independent. A Branch with link would generate errors -----------------------------------------------------------------------------*/ - -/*- Branch to _start by interworking*/ - ldr r4, = main - mov lr, pc - bx r4 - -/*----------------------------------------------------------------------------- -- Loop for ever ---------------- -- End of application. Normally, never occur. -- Could jump on Software Reset ( B 0x0 ). -------------------------------------------------------------------------------*/ -End: - b End diff --git a/target/linux/at91/image/dfboot/src/dataflash.c b/target/linux/at91/image/dfboot/src/dataflash.c deleted file mode 100644 index 5e54460..0000000 --- a/target/linux/at91/image/dfboot/src/dataflash.c +++ /dev/null @@ -1,208 +0,0 @@ -/*---------------------------------------------------------------------------- - * ATMEL Microcontroller Software Support - ROUSSET - - *---------------------------------------------------------------------------- - * The software is delivered "AS IS" without warranty or condition of any - * kind, either express, implied or statutory. This includes without - * limitation any warranty or condition with respect to merchantability or - * fitness for any particular purpose, or against the infringements of - * intellectual property rights of others. - *---------------------------------------------------------------------------- - * File Name : dataflash.c - * Object : High level functions for the dataflash - * Creation : HIi 10/10/2003 - *---------------------------------------------------------------------------- - */ -#include "config.h" -#include "stdio.h" -#include "dataflash.h" - - -AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; -static AT91S_DataFlash DataFlashInst; - -int cs[][CFG_MAX_DATAFLASH_BANKS] = { - {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ - {CFG_DATAFLASH_LOGIC_ADDR_CS3, 3} -}; - -int AT91F_DataflashInit(void) -{ - int i; - int dfcode; - int Nb_device = 0; - - AT91F_SpiInit(); - - for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) { - dataflash_info[i].id = 0; - dataflash_info[i].Device.pages_number = 0; - dfcode = AT91F_DataflashProbe (cs[i][1], &dataflash_info[i].Desc); - - switch (dfcode) { - case AT45DB161: - dataflash_info[i].Device.pages_number = 4096; - dataflash_info[i].Device.pages_size = 528; - dataflash_info[i].Device.page_offset = 10; - dataflash_info[i].Device.byte_mask = 0x300; - dataflash_info[i].Device.cs = cs[i][1]; - dataflash_info[i].Desc.DataFlash_state = IDLE; - dataflash_info[i].logical_address = cs[i][0]; - dataflash_info[i].id = dfcode; - Nb_device++; - break; - - case AT45DB321: - dataflash_info[i].Device.pages_number = 8192; - dataflash_info[i].Device.pages_size = 528; - dataflash_info[i].Device.page_offset = 10; - dataflash_info[i].Device.byte_mask = 0x300; - dataflash_info[i].Device.cs = cs[i][1]; - dataflash_info[i].Desc.DataFlash_state = IDLE; - dataflash_info[i].logical_address = cs[i][0]; - dataflash_info[i].id = dfcode; - Nb_device++; - break; - - case AT45DB642: - dataflash_info[i].Device.pages_number = 8192; - dataflash_info[i].Device.pages_size = 1056; - dataflash_info[i].Device.page_offset = 11; - dataflash_info[i].Device.byte_mask = 0x700; - dataflash_info[i].Device.cs = cs[i][1]; - dataflash_info[i].Desc.DataFlash_state = IDLE; - dataflash_info[i].logical_address = cs[i][0]; - dataflash_info[i].id = dfcode; - Nb_device++; - break; - case AT45DB128: - dataflash_info[i].Device.pages_number = 16384; - dataflash_info[i].Device.pages_size = 1056; - dataflash_info[i].Device.page_offset = 11; - dataflash_info[i].Device.byte_mask = 0x700; - dataflash_info[i].Device.cs = cs[i][1]; - dataflash_info[i].Desc.DataFlash_state = IDLE; - dataflash_info[i].logical_address = cs[i][0]; - dataflash_info[i].id = dfcode; - Nb_device++; - break; - default: - break; - } - } - return (Nb_device); -} - - -void AT91F_DataflashPrintInfo(void) -{ - int i; - for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) { - if (dataflash_info[i].id != 0) { - printf ("DF:AT45DB"); - switch (dataflash_info[i].id) { - case AT45DB161: - printf ("161"); - break; - - case AT45DB321: - printf ("321"); - break; - - case AT45DB642: - printf ("642"); - break; - case AT45DB128: - printf ("128"); - break; - } - - printf ("\n# PG: %6d\n" - "PG SZ: %6d\n" - "SZ=%8d bytes\n" - "ADDR: %08X\n", - (unsigned int) dataflash_info[i].Device.pages_number, - (unsigned int) dataflash_info[i].Device.pages_size, - (unsigned int) dataflash_info[i].Device.pages_number * - dataflash_info[i].Device.pages_size, - (unsigned int) dataflash_info[i].logical_address); - } - } -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataflashSelect */ -/* Object : Select the correct device */ -/*------------------------------------------------------------------------------*/ -static AT91PS_DataFlash AT91F_DataflashSelect(AT91PS_DataFlash pFlash, - unsigned int *addr) -{ - char addr_valid = 0; - int i; - - for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) - if ((*addr & 0xFF000000) == dataflash_info[i].logical_address) { - addr_valid = 1; - break; - } - if (!addr_valid) { - pFlash = (AT91PS_DataFlash) 0; - return pFlash; - } - pFlash->pDataFlashDesc = &(dataflash_info[i].Desc); - pFlash->pDevice = &(dataflash_info[i].Device); - *addr -= dataflash_info[i].logical_address; - return (pFlash); -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : read_dataflash */ -/* Object : dataflash memory read */ -/*------------------------------------------------------------------------------*/ -int read_dataflash(unsigned long addr, unsigned long size, char *result) -{ - unsigned int AddrToRead = addr; - AT91PS_DataFlash pFlash = &DataFlashInst; - - pFlash = AT91F_DataflashSelect (pFlash, &AddrToRead); - if (pFlash == 0) - return -1; - - return (AT91F_DataFlashRead(pFlash, AddrToRead, size, result)); -} - - -/*-----------------------------------------------------------------------------*/ -/* Function Name : write_dataflash */ -/* Object : write a block in dataflash */ -/*-----------------------------------------------------------------------------*/ -int write_dataflash(unsigned long addr_dest, unsigned int addr_src, - unsigned int size) -{ - unsigned int AddrToWrite = addr_dest; - AT91PS_DataFlash pFlash = &DataFlashInst; - - pFlash = AT91F_DataflashSelect(pFlash, &AddrToWrite); - if (AddrToWrite == -1) - return -1; - - return AT91F_DataFlashWrite(pFlash, (unsigned char *) addr_src, AddrToWrite, size); -} - -/*-----------------------------------------------------------------------------*/ -/* Function Name : erase_dataflash */ -/* Object : Erase entire dataflash */ -/*-----------------------------------------------------------------------------*/ -int erase_dataflash(unsigned long addr_dest) -{ - unsigned int AddrToWrite = addr_dest; - AT91PS_DataFlash pFlash = &DataFlashInst; - - pFlash = AT91F_DataflashSelect (pFlash, &AddrToWrite); - if (AddrToWrite == -1) - return -1; - - return AT91F_DataFlashErase(pFlash); -} - diff --git a/target/linux/at91/image/dfboot/src/dataflash.h b/target/linux/at91/image/dfboot/src/dataflash.h deleted file mode 100644 index 8fab63f..0000000 --- a/target/linux/at91/image/dfboot/src/dataflash.h +++ /dev/null @@ -1,181 +0,0 @@ -//*--------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//*--------------------------------------------------------------------------- -//* The software is delivered "AS IS" without warranty or condition of any -//* kind, either express, implied or statutory. This includes without -//* limitation any warranty or condition with respect to merchantability or -//* fitness for any particular purpose, or against the infringements of -//* intellectual property rights of others. -//*--------------------------------------------------------------------------- -//* File Name : AT91_SpiDataFlash.h -//* Object : Data Flash Atmel Description File -//* Translator : -//* -//* 1.0 03/04/01 HI : Creation -//* -//*--------------------------------------------------------------------------- - -#ifndef _DataFlash_h -#define _DataFlash_h - -/* Max value = 15Mhz to be compliant with the Continuous array read function */ -#ifdef SPI_LOW_SPEED -#define AT91C_SPI_CLK 14976000/4 -#else -#define AT91C_SPI_CLK 14976000 -#endif - -/* AC characteristics */ -/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */ - -#define DATAFLASH_TCSS (0xf << 16) /* 250ns 15/60000000 */ -#define DATAFLASH_TCHS (0x1 << 24) /* 250ns 32*1/60000000 */ - - -#define AT91C_SPI_PCS0_SERIAL_DATAFLASH 0xE /* Chip Select 0 : NPCS0 %1110 */ -#define AT91C_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3 : NPCS3 %0111 */ - -#define CFG_MAX_DATAFLASH_BANKS 2 -#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 -#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 - -typedef struct { - unsigned long base; /* logical base address for a bank */ - unsigned long size; /* total bank size */ - unsigned long page_count; - unsigned long page_size; - unsigned long id; /* device id */ -} dataflash_info_t; - -typedef unsigned int AT91S_DataFlashStatus; - -/*----------------------------------------------------------------------*/ -/* DataFlash Structures */ -/*----------------------------------------------------------------------*/ - -/*---------------------------------------------*/ -/* DataFlash Descriptor Structure Definition */ -/*---------------------------------------------*/ -typedef struct _AT91S_DataflashDesc { - unsigned char *tx_cmd_pt; - unsigned int tx_cmd_size; - unsigned char *rx_cmd_pt; - unsigned int rx_cmd_size; - unsigned char *tx_data_pt; - unsigned int tx_data_size; - unsigned char *rx_data_pt; - unsigned int rx_data_size; - volatile unsigned char DataFlash_state; - unsigned char command[8]; -} AT91S_DataflashDesc, *AT91PS_DataflashDesc; - -/*---------------------------------------------*/ -/* DataFlash device definition structure */ -/*---------------------------------------------*/ -typedef struct _AT91S_Dataflash { - int pages_number; /* dataflash page number */ - int pages_size; /* dataflash page size */ - int page_offset; /* page offset in command */ - int byte_mask; /* byte mask in command */ - int cs; -} AT91S_DataflashFeatures, *AT91PS_DataflashFeatures; - - -/*---------------------------------------------*/ -/* DataFlash Structure Definition */ -/*---------------------------------------------*/ -typedef struct _AT91S_DataFlash { - AT91PS_DataflashDesc pDataFlashDesc; /* dataflash descriptor */ - AT91PS_DataflashFeatures pDevice; /* Pointer on a dataflash features array */ -} AT91S_DataFlash, *AT91PS_DataFlash; - - -typedef struct _AT91S_DATAFLASH_INFO { - - AT91S_DataflashDesc Desc; - AT91S_DataflashFeatures Device; /* Pointer on a dataflash features array */ - unsigned long logical_address; - unsigned int id; /* device id */ -} AT91S_DATAFLASH_INFO, *AT91PS_DATAFLASH_INFO; - - -/*-------------------------------------------------------------------------------------------------*/ - -#define AT45DB161 0x2c -#define AT45DB321 0x34 -#define AT45DB642 0x3c -#define AT45DB128 0x10 - -#define AT91C_DATAFLASH_TIMEOUT 20000 /* For AT91F_DataFlashWaitReady */ - -/* DataFlash return value */ -#define AT91C_DATAFLASH_BUSY 0x00 -#define AT91C_DATAFLASH_OK 0x01 -#define AT91C_DATAFLASH_ERROR 0x02 -#define AT91C_DATAFLASH_MEMORY_OVERFLOW 0x03 -#define AT91C_DATAFLASH_BAD_COMMAND 0x04 -#define AT91C_DATAFLASH_BAD_ADDRESS 0x05 - - -/* Driver State */ -#define IDLE 0x0 -#define BUSY 0x1 -#define ERROR 0x2 - -/* DataFlash Driver State */ -#define GET_STATUS 0x0F - -/*-------------------------------------------------------------------------------------------------*/ -/* Command Definition */ -/*-------------------------------------------------------------------------------------------------*/ - -/* READ COMMANDS */ -#define DB_CONTINUOUS_ARRAY_READ 0xE8 /* Continuous array read */ -#define DB_BURST_ARRAY_READ 0xE8 /* Burst array read */ -#define DB_PAGE_READ 0xD2 /* Main memory page read */ -#define DB_BUF1_READ 0xD4 /* Buffer 1 read */ -#define DB_BUF2_READ 0xD6 /* Buffer 2 read */ -#define DB_STATUS 0xD7 /* Status Register */ - -/* PROGRAM and ERASE COMMANDS */ -#define DB_BUF1_WRITE 0x84 /* Buffer 1 write */ -#define DB_BUF2_WRITE 0x87 /* Buffer 2 write */ -#define DB_BUF1_PAGE_ERASE_PGM 0x83 /* Buffer 1 to main memory page program with built-In erase */ -#define DB_BUF1_PAGE_ERASE_FASTPGM 0x93 /* Buffer 1 to main memory page program with built-In erase, Fast program */ -#define DB_BUF2_PAGE_ERASE_PGM 0x86 /* Buffer 2 to main memory page program with built-In erase */ -#define DB_BUF2_PAGE_ERASE_FASTPGM 0x96 /* Buffer 1 to main memory page program with built-In erase, Fast program */ -#define DB_BUF1_PAGE_PGM 0x88 /* Buffer 1 to main memory page program without built-In erase */ -#define DB_BUF1_PAGE_FASTPGM 0x98 /* Buffer 1 to main memory page program without built-In erase, Fast program */ -#define DB_BUF2_PAGE_PGM 0x89 /* Buffer 2 to main memory page program without built-In erase */ -#define DB_BUF2_PAGE_FASTPGM 0x99 /* Buffer 1 to main memory page program without built-In erase, Fast program */ -#define DB_PAGE_ERASE 0x81 /* Page Erase */ -#define DB_BLOCK_ERASE 0x50 /* Block Erase */ -#define DB_PAGE_PGM_BUF1 0x82 /* Main memory page through buffer 1 */ -#define DB_PAGE_FASTPGM_BUF1 0x92 /* Main memory page through buffer 1, Fast program */ -#define DB_PAGE_PGM_BUF2 0x85 /* Main memory page through buffer 2 */ -#define DB_PAGE_FastPGM_BUF2 0x95 /* Main memory page through buffer 2, Fast program */ - -/* ADDITIONAL COMMANDS */ -#define DB_PAGE_2_BUF1_TRF 0x53 /* Main memory page to buffer 1 transfert */ -#define DB_PAGE_2_BUF2_TRF 0x55 /* Main memory page to buffer 2 transfert */ -#define DB_PAGE_2_BUF1_CMP 0x60 /* Main memory page to buffer 1 compare */ -#define DB_PAGE_2_BUF2_CMP 0x61 /* Main memory page to buffer 2 compare */ -#define DB_AUTO_PAGE_PGM_BUF1 0x58 /* Auto page rewrite throught buffer 1 */ -#define DB_AUTO_PAGE_PGM_BUF2 0x59 /* Auto page rewrite throught buffer 2 */ - -/*-------------------------------------------------------------------------------------------------*/ - -extern AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; - -extern void AT91F_SpiInit(void); -extern int AT91F_DataflashProbe(int i, AT91PS_DataflashDesc pDesc); -extern int AT91F_DataFlashRead(AT91PS_DataFlash, unsigned long , unsigned long, char *); -extern AT91S_DataFlashStatus AT91F_DataFlashWrite(AT91PS_DataFlash ,unsigned char *, int, int); -extern AT91S_DataFlashStatus AT91F_DataFlashErase(AT91PS_DataFlash pDataFlash); -extern int AT91F_DataflashInit(void); -extern void AT91F_DataflashPrintInfo(void); -extern int read_dataflash(unsigned long addr, unsigned long size, char *result); -extern int write_dataflash(unsigned long addr_dest, unsigned int addr_src, unsigned int size); -extern int erase_dataflash(unsigned long addr_dest); - -#endif diff --git a/target/linux/at91/image/dfboot/src/div0.c b/target/linux/at91/image/dfboot/src/div0.c deleted file mode 100644 index d6fd90e..0000000 --- a/target/linux/at91/image/dfboot/src/div0.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* Replacement (=dummy) for GNU/Linux division-by zero handler */ -void __div0 (void) -{ - while(-1); -} diff --git a/target/linux/at91/image/dfboot/src/elf32-littlearm.lds b/target/linux/at91/image/dfboot/src/elf32-littlearm.lds deleted file mode 100644 index 4d4efb6..0000000 --- a/target/linux/at91/image/dfboot/src/elf32-littlearm.lds +++ /dev/null @@ -1,19 +0,0 @@ -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : { *(.text) } - - . = ALIGN(4); - .rodata : { *(.rodata) } - - . = ALIGN(4); - .data : { *(.data) } - - . = ALIGN(4); - .bss : { *(.bss) } -}
\ No newline at end of file diff --git a/target/linux/at91/image/dfboot/src/embedded_services.h b/target/linux/at91/image/dfboot/src/embedded_services.h deleted file mode 100644 index 956b9ed..0000000 --- a/target/linux/at91/image/dfboot/src/embedded_services.h +++ /dev/null @@ -1,500 +0,0 @@ -//*---------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//*---------------------------------------------------------------------------- -//* The software is delivered "AS IS" without warranty or condition of any -//* kind, either express, implied or statutory. This includes without -//* limitation any warranty or condition with respect to merchantability or -//* fitness for any particular purpose, or against the infringements of -//* intellectual property rights of others. -//*---------------------------------------------------------------------------- -//* File Name : embedded_sevices.h -//* Object : Header File with all the embedded software services definitions -//* -//* 1.0 24 Jan 2003 FB : Creation -//*---------------------------------------------------------------------------- -#ifndef embedded_sevices_h -#define embedded_sevices_h - -#include "AT91RM9200.h" - -#define AT91C_BASE_ROM (char *)0x00100000 - -/* Return values */ -#define AT91C_BUFFER_SUCCESS 0 -#define AT91C_BUFFER_ERROR_SHIFT 16 -#define AT91C_BUFFER_ERROR (0x0F << AT91C_BUFFER_ERROR_SHIFT) - -#define AT91C_BUFFER_OVERFLOW (0x01 << AT91C_BUFFER_ERROR_SHIFT) -#define AT91C_BUFFER_UNDERRUN (0x02 << AT91C_BUFFER_ERROR_SHIFT) - -typedef unsigned int AT91S_BufferStatus; - -struct _AT91S_Pipe; - -// This structure is a virtual object of a buffer -typedef struct _AT91S_Buffer -{ - struct _AT91S_Pipe *pPipe; - void *pChild; - - // Functions invoked by the pipe - AT91S_BufferStatus (*SetRdBuffer) (struct _AT91S_Buffer *pSBuffer, char *pBuffer, unsigned int Size); - AT91S_BufferStatus (*SetWrBuffer) (struct _AT91S_Buffer *pSBuffer, char const *pBuffer, unsigned int Size); - AT91S_BufferStatus (*RstRdBuffer) (struct _AT91S_Buffer *pSBuffer); - AT91S_BufferStatus (*RstWrBuffer) (struct _AT91S_Buffer *pSBuffer); - char (*MsgWritten) (struct _AT91S_Buffer *pSBuffer, char const *pBuffer); - char (*MsgRead) (struct _AT91S_Buffer *pSBuffer, char const *pBuffer); - // Functions invoked by the peripheral - AT91S_BufferStatus (*GetWrBuffer) (struct _AT91S_Buffer *pSBuffer, char const **pData, unsigned int *pSize); - AT91S_BufferStatus (*GetRdBuffer) (struct _AT91S_Buffer *pSBuffer, char **pData, unsigned int *pSize); - AT91S_BufferStatus (*EmptyWrBuffer) (struct _AT91S_Buffer *pSBuffer, unsigned int size); - AT91S_BufferStatus (*FillRdBuffer) (struct _AT91S_Buffer *pSBuffer, unsigned int size); - char (*IsWrEmpty) (struct _AT91S_Buffer *pSBuffer); - char (*IsRdFull) (struct _AT91S_Buffer *pSBuffer); -} AT91S_Buffer, *AT91PS_Buffer; - -// =========================================================================================== -// SimpleBuffer definition -// -// This structure is pointed by pRealBuffer field in the SBuffer -// It contains usefull information for a real implementation of -// a SBuffer object. -// The application just create an instance of SSBUffer and SBuffer, -// call OpenSimpleBuffer, and continue using SBuffer instance - -typedef struct _AT91S_SBuffer -{ - AT91S_Buffer parent; - char *pRdBuffer; - char const *pWrBuffer; - unsigned int szRdBuffer; - unsigned int szWrBuffer; - unsigned int stRdBuffer; - unsigned int stWrBuffer; -} AT91S_SBuffer, *AT91PS_SBuffer; - -typedef AT91PS_Buffer (*AT91PF_OpenSBuffer) (AT91PS_SBuffer); - -// This function is called by the application -extern AT91PS_Buffer AT91F_OpenSBuffer(AT91PS_SBuffer pBuffer); - -// Functions invoked by the pipe -extern AT91S_BufferStatus AT91F_SbSetRdBuffer (AT91PS_Buffer pBuffer, char *pData, unsigned int Size); -extern AT91S_BufferStatus AT91F_SbSetWrBuffer (AT91PS_Buffer pBuffer, char const *pData, unsigned int Size); -extern AT91S_BufferStatus AT91F_SbRstRdBuffer (AT91PS_Buffer pBuffer); -extern AT91S_BufferStatus AT91F_SbRstWrBuffer (AT91PS_Buffer pBuffer); -extern char AT91F_SbMsgWritten (AT91PS_Buffer pBuffer, char const *pMsg); -extern char AT91F_SbMsgRead (AT91PS_Buffer pBuffer, char const *pMsg); -// Functions invoked by the peripheral -extern AT91S_BufferStatus AT91F_SbGetWrBuffer (AT91PS_Buffer pBuffer, char const **pData, unsigned int *pSize); -extern AT91S_BufferStatus AT91F_SbGetRdBuffer (AT91PS_Buffer pBuffer, char **pData, unsigned int *pSize); -extern AT91S_BufferStatus AT91F_SbEmptyWrBuffer(AT91PS_Buffer pBuffer, unsigned int size); -extern AT91S_BufferStatus AT91F_SbFillRdBuffer (AT91PS_Buffer pBuffer, unsigned int size); -extern char AT91F_SbIsWrEmpty (AT91PS_Buffer pBuffer); -extern char AT91F_SbIsRdFull (AT91PS_Buffer pBuffer); - -#ifdef DBG_DRV_BUFFER -extern char const *AT91F_SbGetError(AT91S_BufferStatus errorNumber); -#endif - - -#define AT91C_OPEN_CTRLTEMPO_SUCCESS 0 -#define AT91C_ERROR_OPEN_CTRLTEMPO 1 -#define AT91C_START_OK 2 -#define AT91C_STOP_OK 3 -#define AT91C_TIMEOUT_REACHED 4 - -typedef enum _AT91E_SvcTempo { - AT91E_SVCTEMPO_DIS, - AT91E_SVCTEMPO_EN -} AT91E_SvcTempo; - -typedef unsigned int AT91S_TempoStatus; - -// AT91S_SvcTempo -typedef struct _AT91S_SvcTempo -{ - - // Methods: - AT91S_TempoStatus (*Start) ( - struct _AT91S_SvcTempo *pSvc, - unsigned int timeout, - unsigned int reload, - void (*callback) (AT91S_TempoStatus, void *), - void *pData); - AT91S_TempoStatus (*Stop) (struct _AT91S_SvcTempo *pSvc); - - struct _AT91S_SvcTempo *pPreviousTempo; - struct _AT91S_SvcTempo *pNextTempo; - - // Data - unsigned int TickTempo; //* timeout value - unsigned int ReloadTempo;//* Reload value for periodic execution - void (*TempoCallback)(AT91S_TempoStatus, void *); - void *pPrivateData; - AT91E_SvcTempo flag; -} AT91S_SvcTempo, *AT91PS_SvcTempo; - - -// AT91S_CtrlTempo -typedef struct _AT91S_CtlTempo -{ - // Members: - - // Start and stop for Timer hardware - AT91S_TempoStatus (*CtlTempoStart) (void *pTimer); - AT91S_TempoStatus (*CtlTempoStop) (void *pTimer); - - // Start and stop for Tempo service - AT91S_TempoStatus (*SvcTempoStart) ( - struct _AT91S_SvcTempo *pSvc, - unsigned int timeout, - unsigned int reload, - void (*callback) (AT91S_TempoStatus, void *), - void *pData); - AT91S_TempoStatus (*SvcTempoStop) (struct _AT91S_SvcTempo *pSvc); - AT91S_TempoStatus (*CtlTempoSetTime)(struct _AT91S_CtlTempo *pCtrl, unsigned int NewTime); - AT91S_TempoStatus (*CtlTempoGetTime)(struct _AT91S_CtlTempo *pCtrl); - AT91S_TempoStatus (*CtlTempoIsStart)(struct _AT91S_CtlTempo *pCtrl); - AT91S_TempoStatus (*CtlTempoCreate) ( - struct _AT91S_CtlTempo *pCtrl, - struct _AT91S_SvcTempo *pTempo); - AT91S_TempoStatus (*CtlTempoRemove) ( - struct _AT91S_CtlTempo *pCtrl, - struct _AT91S_SvcTempo *pTempo); - AT91S_TempoStatus (*CtlTempoTick) (struct _AT91S_CtlTempo *pCtrl); - - // Data: - - void *pPrivateData; // Pointer to devived class - void const *pTimer; // hardware - AT91PS_SvcTempo pFirstTempo; - AT91PS_SvcTempo pNewTempo; -} AT91S_CtlTempo, *AT91PS_CtlTempo; -typedef AT91S_TempoStatus (*AT91PF_OpenCtlTempo) ( AT91PS_CtlTempo, void const *); - -// This function is called by the application. -extern AT91S_TempoStatus AT91F_OpenCtlTempo( AT91PS_CtlTempo pCtrlTempo, void const *pTempoTimer ); - -extern AT91S_TempoStatus AT91F_STStart (void *); -extern AT91S_TempoStatus AT91F_STStop (void *); -extern AT91S_TempoStatus AT91F_STSetTime (AT91PS_CtlTempo, unsigned int); -extern AT91S_TempoStatus AT91F_STGetTime (AT91PS_CtlTempo); -extern AT91S_TempoStatus AT91F_STIsStart (AT91PS_CtlTempo); -extern AT91S_TempoStatus AT91F_CtlTempoCreate (AT91PS_CtlTempo, AT91PS_SvcTempo); -extern AT91S_TempoStatus AT91F_CtlTempoRemove (AT91PS_CtlTempo, AT91PS_SvcTempo); -extern AT91S_TempoStatus AT91F_CtlTempoTick (AT91PS_CtlTempo); -extern AT91S_TempoStatus AT91F_SvcTempoStart ( - AT91PS_SvcTempo pSvc, - unsigned int timeout, - unsigned int reload, - void (*callback) (AT91S_TempoStatus, void *), - void *pData); -extern AT91S_TempoStatus AT91F_SvcTempoStop (AT91PS_SvcTempo); - - -// Following types are defined in another header files -struct _AT91S_Buffer; - -// Constants: -#define AT91C_COMMSVC_SUCCESS 0 -#define AT91C_COMMSVC_ERROR_SHIFT 8 -#define AT91C_COMMSVC_ERROR (0x0f << AT91C_COMMSVC_ERROR_SHIFT) - -typedef unsigned int AT91S_SvcCommStatus; - -// AT91S_Service definition -// This structure is an abstraction of a communication peripheral -typedef struct _AT91S_Service -{ - // Methods: - AT91S_SvcCommStatus (*Reset) (struct _AT91S_Service *pService); - AT91S_SvcCommStatus (*StartTx)(struct _AT91S_Service *pService); - AT91S_SvcCommStatus (*StartRx)(struct _AT91S_Service *pService); - AT91S_SvcCommStatus (*StopTx) (struct _AT91S_Service *pService); - AT91S_SvcCommStatus (*StopRx) (struct _AT91S_Service *pService); - char (*TxReady)(struct _AT91S_Service *pService); - char (*RxReady)(struct _AT91S_Service *pService); - // Data: - struct _AT91S_Buffer *pBuffer; // Link to a buffer object - void *pChild; -} AT91S_SvcComm, *AT91PS_SvcComm; - -// Constants: -#define AT91C_XMODEM_SOH 0x01 /* Start of Heading for 128 bytes */ -#define AT91C_XMODEM_STX 0x02 /* Start of heading for 1024 bytes */ -#define AT91C_XMODEM_EOT 0x04 /* End of transmission */ -#define AT91C_XMODEM_ACK 0x06 /* Acknowledge */ -#define AT91C_XMODEM_NAK 0x15 /* Negative Acknowledge */ -#define AT91C_XMODEM_CRCCHR 'C' - -#define AT91C_XMODEM_PACKET_SIZE 2 // packet + packetCRC -#define AT91C_XMODEM_CRC_SIZE 2 // crcLSB + crcMSB -#define AT91C_XMODEM_DATA_SIZE_SOH 128 // data 128 corresponding to SOH header -#define AT91C_XMODEM_DATA_SIZE_STX 1024 // data 1024 corresponding to STX header - -//* Following structure is used by SPipe to refer to the USB device peripheral endpoint -typedef struct _AT91PS_SvcXmodem { - - // Public Methods: - AT91S_SvcCommStatus (*Handler) (struct _AT91PS_SvcXmodem *, unsigned int); - AT91S_SvcCommStatus (*StartTx) (struct _AT91PS_SvcXmodem *, unsigned int); - AT91S_SvcCommStatus (*StopTx) (struct _AT91PS_SvcXmodem *, unsigned int); - - // Private Methods: - AT91S_SvcCommStatus (*ReadHandler) (struct _AT91PS_SvcXmodem *, unsigned int csr); - AT91S_SvcCommStatus (*WriteHandler) (struct _AT91PS_SvcXmodem *, unsigned int csr); - unsigned short (*GetCrc) (char *ptr, unsigned int count); - char (*CheckHeader) (unsigned char currentPacket, char *packet); - char (*CheckData) (struct _AT91PS_SvcXmodem *); - - AT91S_SvcComm parent; // Base class - AT91PS_USART pUsart; - - AT91S_SvcTempo tempo; // Link to a AT91S_Tempo object - - char *pData; - unsigned int dataSize; // = XMODEM_DATA_STX or XMODEM_DATA_SOH - char packetDesc[AT91C_XMODEM_PACKET_SIZE]; - unsigned char packetId; // Current packet - char packetStatus; - char isPacketDesc; - char eot; // end of transmition -} AT91S_SvcXmodem, *AT91PS_SvcXmodem; - -typedef AT91PS_SvcComm (*AT91PF_OpenSvcXmodem) ( AT91PS_SvcXmodem, AT91PS_USART, AT91PS_CtlTempo); - -// This function is called by the application. -extern AT91PS_SvcComm AT91F_OpenSvcXmodem( AT91PS_SvcXmodem, AT91PS_USART, AT91PS_CtlTempo); - -extern unsigned short AT91F_SvcXmodemGetCrc (char *ptr, unsigned int count); -extern char AT91F_SvcXmodemCheckHeader(unsigned char currentPacket, char *packet); -extern char AT91F_SvcXmodemCheckData (AT91PS_SvcXmodem pSvcXmodem); -extern AT91S_SvcCommStatus AT91F_SvcXmodemReadHandler(AT91PS_SvcXmodem pSvcXmodem, unsigned int csr); -extern AT91S_SvcCommStatus AT91F_SvcXmodemWriteHandler(AT91PS_SvcXmodem pSvcXmodem, unsigned int csr); -extern AT91S_SvcCommStatus AT91F_SvcXmodemStartTx(AT91PS_SvcComm pSvcComm); -extern AT91S_SvcCommStatus AT91F_SvcXmodemStopTx(AT91PS_SvcComm pSvcComm); -extern AT91S_SvcCommStatus AT91F_SvcXmodemStartRx(AT91PS_SvcComm pSvcComm); -extern AT91S_SvcCommStatus AT91F_SvcXmodemStopRx(AT91PS_SvcComm pSvcComm); -extern char AT91F_SvcXmodemTxReady(AT91PS_SvcComm pService); -extern char AT91F_SvcXmodemRxReady(AT91PS_SvcComm pSvcComm); - - -// Constants: -#define AT91C_PIPE_SUCCESS 0 -#define AT91C_PIPE_ERROR_SHIFT 8 -#define AT91C_PIPE_ERROR (0x0F << AT91C_PIPE_ERROR_SHIFT) - -#define AT91C_PIPE_OPEN_FAILED (1 << AT91C_PIPE_ERROR_SHIFT) -#define AT91C_PIPE_WRITE_FAILED (2 << AT91C_PIPE_ERROR_SHIFT) -#define AT91C_PIPE_WRITE_ABORTED (3 << AT91C_PIPE_ERROR_SHIFT) -#define AT91C_PIPE_READ_FAILED (4 << AT91C_PIPE_ERROR_SHIFT) -#define AT91C_PIPE_READ_ABORTED (5 << AT91C_PIPE_ERROR_SHIFT) -#define AT91C_PIPE_ABORT_FAILED (6 << AT91C_PIPE_ERROR_SHIFT) -#define AT91C_PIPE_RESET_FAILED (7 << AT91C_PIPE_ERROR_SHIFT) - -/* _AT91S_Pipe stucture */ -typedef unsigned int AT91S_PipeStatus; - -typedef struct _AT91S_Pipe -{ - // A pipe is linked with a peripheral and a buffer - AT91PS_SvcComm pSvcComm; - AT91PS_Buffer pBuffer; - - // Callback functions with their arguments - void (*WriteCallback) (AT91S_PipeStatus, void *); - void (*ReadCallback) (AT91S_PipeStatus, void *); - void *pPrivateReadData; - void *pPrivateWriteData; - - // Pipe methods - AT91S_PipeStatus (*Write) ( - struct _AT91S_Pipe *pPipe, - char const * pData, - unsigned int size, - void (*callback) (AT91S_PipeStatus, void *), - void *privateData); - AT91S_PipeStatus (*Read) ( - struct _AT91S_Pipe *pPipe, - char *pData, - unsigned int size, - void (*callback) (AT91S_PipeStatus, void *), - void *privateData); - AT91S_PipeStatus (*AbortWrite) ( - struct _AT91S_Pipe *pPipe); - AT91S_PipeStatus (*AbortRead) ( - struct _AT91S_Pipe *pPipe); - AT91S_PipeStatus (*Reset) ( - struct _AT91S_Pipe *pPipe); - char (*IsWritten) ( - struct _AT91S_Pipe *pPipe, - char const *pVoid); - char (*IsReceived) ( - struct _AT91S_Pipe *pPipe, - char const *pVoid); -} AT91S_Pipe, *AT91PS_Pipe; - -// types used in AT91S_Pipe -typedef AT91PS_Pipe (*AT91PF_OpenPipe) (AT91PS_Pipe, AT91PS_SvcComm, AT91PS_Buffer); -typedef void (*AT91PF_PipeWriteCallBack) (AT91S_PipeStatus, void *); -typedef void (*AT91PF_PipeReadCallBack) (AT91S_PipeStatus, void *); -typedef AT91S_PipeStatus (*AT91PF_PipeWrite) (AT91PS_Pipe, char const *, unsigned int, void (*) (AT91S_PipeStatus, void *), void *); -typedef AT91S_PipeStatus (*AT91PF_PipeRead) (AT91PS_Pipe, char const *, unsigned int, void (*) (AT91S_PipeStatus, void *), void *); -typedef AT91S_PipeStatus (*AT91PF_PipeAbortWrite) (AT91PS_Pipe); -typedef AT91S_PipeStatus (*AT91PF_PipeAbortRead) (AT91PS_Pipe); -typedef AT91S_PipeStatus (*AT91PF_PipeReset) (AT91PS_Pipe); -typedef char (*AT91PF_PipeIsWritten) (AT91PS_Pipe, char const *); -typedef char (*AT91PF_PipeIsReceived) (AT91PS_Pipe, char const *); - -// This function is called by the application -extern AT91PS_Pipe AT91F_OpenPipe( - AT91PS_Pipe pPipe, - AT91PS_SvcComm pSvcComm, - AT91PS_Buffer pBuffer); - -// Following functions are called through AT91S_Pipe pointers - -extern AT91S_PipeStatus AT91F_PipeWrite( - AT91PS_Pipe pPipe, - char const *pVoid, - unsigned int size, - AT91PF_PipeWriteCallBack callback, - void *privateData); -extern AT91S_PipeStatus AT91F_PipeRead( - AT91PS_Pipe pPipe, - char *pVoid, - unsigned int Size, - AT91PF_PipeReadCallBack callback, - void *privateData); -extern AT91S_PipeStatus AT91F_PipeAbortWrite(AT91PS_Pipe pPipe); -extern AT91S_PipeStatus AT91F_PipeAbortRead(AT91PS_Pipe pPipe); -extern AT91S_PipeStatus AT91F_PipeReset(AT91PS_Pipe pPipe); -extern char AT91F_PipeMsgWritten(AT91PS_Pipe pPipe, char const *pVoid); -extern char AT91F_PipeMsgReceived(AT91PS_Pipe pPipe, char const *pVoid); - -#ifdef DBG_DRV_PIPE -// This function parse the error number and return a string -// describing the error message -extern char const *AT91F_PipeGetError(AT91S_PipeStatus msgId); -#endif - -extern const unsigned char bit_rev[256]; - -extern void CalculateCrc32(const unsigned char *,unsigned int, unsigned int *); -extern void CalculateCrc16(const unsigned char *, unsigned int , unsigned short *); -extern void CalculateCrcHdlc(const unsigned char *, unsigned int, unsigned short *); -extern void CalculateCrc16ccitt(const unsigned char *, unsigned int , unsigned short *); - -typedef const unsigned char* AT91PS_SVC_CRC_BIT_REV ; - -typedef void (*AT91PF_SVC_CRC32) (const unsigned char *, unsigned int, unsigned int *); -typedef void (*AT91PF_SVC_CRC16) (const unsigned char *, unsigned int, unsigned short *); -typedef void (*AT91PF_SVC_CRCHDLC) (const unsigned char *, unsigned int, unsigned short *); -typedef void (*AT91PF_SVC_CRCCCITT)(const unsigned char *, unsigned int , unsigned short *); - - -typedef short (*AT91PF_Sinus) (int angle); -typedef const short * AT91PS_SINE_TAB; - -extern short AT91F_Sinus(int angle); -extern const short AT91C_SINUS180_TAB[256]; - - -typedef void (TypeAICHandler) (void) ; - - -// ROM BOOT Structure Element Definition (liv v2) -typedef struct _AT91S_MEMCDesc -{ - AT91PS_MC memc_base ; /* Peripheral base */ - unsigned char periph_id ; /* MC Peripheral Identifier */ -} AT91S_MEMCDesc, *AT91PS_MEMCDesc ; - -typedef struct _AT91S_Pio2Desc -{ - AT91PS_PIO pio_base ; /* Base Address */ - unsigned char periph_id ; /* Peripheral Identifier */ - unsigned char pio_number ; /* Total Pin Number */ -} AT91S_Pio2Desc, *AT91PS_Pio2Desc ; - -typedef struct _AT91S_SPIDesc -{ - AT91PS_SPI spi_base ; - const AT91PS_PIO pio_base ; - unsigned char periph_id ; - unsigned char pin_spck ; - unsigned char pin_miso ; - unsigned char pin_mosi ; - unsigned char pin_npcs[4] ; -} AT91S_SPIDesc, *AT91PS_SPIDesc ; - -typedef struct _AT91S_USART2Desc -{ - AT91PS_USART usart_base ; /* Peripheral base */ - const AT91PS_PIO pio_base ; /* IO controller descriptor */ - unsigned int pin_rxd ; /* RXD pin number in the PIO */ - unsigned int pin_txd ; /* TXD pin number in the PIO */ - unsigned int pin_sck ; /* SCK pin number in the PIO */ - unsigned int pin_rts ; /* RTS pin number in the PIO */ - unsigned int pin_cts ; /* CTS pin number in the PIO */ - unsigned int pin_dtr ; /* DTR pin number in the PIO */ - unsigned int pin_ri ; /* RI pin number in the PIO */ - unsigned int pin_dsr ; /* DSR pin number in the PIO */ - unsigned int pin_dcd ; /* DCD pin number in the PIO */ - unsigned int periph_id ; /* USART Peripheral Identifier */ -} AT91S_USART2Desc, *AT91PS_USART2Desc ; - -typedef struct _AT91S_TWIDesc -{ - AT91PS_TWI TWI_base ; - const AT91PS_PIO pio_base ; - unsigned int pin_sck ; - unsigned int pin_sda ; - unsigned int periph_id; -}AT91S_TWIDesc, *AT91PS_TWIDesc; - -typedef struct _AT91S_STDesc -{ - AT91PS_ST st_base ; /* Peripheral base address */ - TypeAICHandler *AsmSTHandler ; /* Assembly interrupt handler */ - unsigned char PeriphId ; /* Peripheral Identifier */ -} AT91S_STDesc, *AT91PS_STDesc; - -typedef struct _AT91S_RomBoot { - const unsigned int version; - // Peripheral descriptors - const AT91S_MEMCDesc MEMC_DESC; - const AT91S_STDesc SYSTIMER_DESC; - const AT91S_Pio2Desc PIOA_DESC; - const AT91S_Pio2Desc PIOB_DESC; - const AT91S_USART2Desc DBGU_DESC; - const AT91S_USART2Desc USART0_DESC; - const AT91S_USART2Desc USART1_DESC; - const AT91S_USART2Desc USART2_DESC; - const AT91S_USART2Desc USART3_DESC; - const AT91S_TWIDesc TWI_DESC; - const AT91S_SPIDesc SPI_DESC; - - // Objects entry - const AT91PF_OpenPipe OpenPipe; - const AT91PF_OpenSBuffer OpenSBuffer; - const unsigned int reserved1; - const AT91PF_OpenSvcXmodem OpenSvcXmodem; - const AT91PF_OpenCtlTempo OpenCtlTempo; - const unsigned int reserved2; - const unsigned int reserved3; - const unsigned int reserved4; - const AT91PF_SVC_CRC16 CRC16; - const AT91PF_SVC_CRCCCITT CRCCCITT; - const AT91PF_SVC_CRCHDLC CRCHDLC; - const AT91PF_SVC_CRC32 CRC32; - const AT91PS_SVC_CRC_BIT_REV Bit_Reverse_Array; - const AT91PS_SINE_TAB SineTab; - const AT91PF_Sinus Sine; -} AT91S_RomBoot, *AT91PS_RomBoot; - -#define AT91C_ROM_BOOT_ADDRESS ((const AT91S_RomBoot *) ( *((unsigned int *) (AT91C_BASE_ROM + 0x20))) ) - -#endif - diff --git a/target/linux/at91/image/dfboot/src/include/AT91C_MCI_Device.h b/target/linux/at91/image/dfboot/src/include/AT91C_MCI_Device.h deleted file mode 100644 index 43d5835..0000000 --- a/target/linux/at91/image/dfboot/src/include/AT91C_MCI_Device.h +++ /dev/null @@ -1,379 +0,0 @@ -//*--------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//*--------------------------------------------------------------------------- -//* The software is delivered "AS IS" without warranty or condition of any -//* kind, either express, implied or statutory. This includes without -//* limitation any warranty or condition with respect to merchantability or -//* fitness for any particular purpose, or against the infringements of -//* intellectual property rights of others. -//*--------------------------------------------------------------------------- -//* File Name : AT91C_MCI_Device.h -//* Object : Data Flash Atmel Description File -//* Translator : -//* -//* 1.0 26/11/02 FB : Creation -//*--------------------------------------------------------------------------- - -#ifndef AT91C_MCI_Device_h -#define AT91C_MCI_Device_h - -#include "AT91RM9200.h" -#include "lib_AT91RM9200.h" - -typedef unsigned int AT91S_MCIDeviceStatus; - -///////////////////////////////////////////////////////////////////////////////////////////////////// - -#define AT91C_CARD_REMOVED 0 -#define AT91C_MMC_CARD_INSERTED 1 -#define AT91C_SD_CARD_INSERTED 2 - -#define AT91C_NO_ARGUMENT 0x0 - -#define AT91C_FIRST_RCA 0xCAFE -#define AT91C_MAX_MCI_CARDS 10 - -#define AT91C_BUS_WIDTH_1BIT 0x00 -#define AT91C_BUS_WIDTH_4BITS 0x02 - -/* Driver State */ -#define AT91C_MCI_IDLE 0x0 -#define AT91C_MCI_TIMEOUT_ERROR 0x1 -#define AT91C_MCI_RX_SINGLE_BLOCK 0x2 -#define AT91C_MCI_RX_MULTIPLE_BLOCK 0x3 -#define AT91C_MCI_RX_STREAM 0x4 -#define AT91C_MCI_TX_SINGLE_BLOCK 0x5 -#define AT91C_MCI_TX_MULTIPLE_BLOCK 0x6 -#define AT91C_MCI_TX_STREAM 0x7 - -/* TimeOut */ -#define AT91C_TIMEOUT_CMDRDY 30 - -///////////////////////////////////////////////////////////////////////////////////////////////////// -// MMC & SDCard Structures -///////////////////////////////////////////////////////////////////////////////////////////////////// - -/*-----------------------------------------------*/ -/* SDCard Device Descriptor Structure Definition */ -/*-----------------------------------------------*/ -typedef struct _AT91S_MciDeviceDesc -{ - volatile unsigned char state; - unsigned char SDCard_bus_width; - -} AT91S_MciDeviceDesc, *AT91PS_MciDeviceDesc; - -/*---------------------------------------------*/ -/* MMC & SDCard Structure Device Features */ -/*---------------------------------------------*/ -typedef struct _AT91S_MciDeviceFeatures -{ - unsigned char Card_Inserted; // (0=AT91C_CARD_REMOVED) (1=AT91C_MMC_CARD_INSERTED) (2=AT91C_SD_CARD_INSERTED) - unsigned int Relative_Card_Address; // RCA - unsigned int Max_Read_DataBlock_Length; // 2^(READ_BL_LEN) in CSD - unsigned int Max_Write_DataBlock_Length; // 2^(WRITE_BL_LEN) in CSD - unsigned char Read_Partial; // READ_BL_PARTIAL - unsigned char Write_Partial; // WRITE_BL_PARTIAL - unsigned char Erase_Block_Enable; // ERASE_BLK_EN - unsigned char Read_Block_Misalignment; // READ_BLK_MISALIGN - unsigned char Write_Block_Misalignment; // WRITE_BLK_MISALIGN - unsigned char Sector_Size; // SECTOR_SIZE - unsigned int Memory_Capacity; // Size in bits of the device - -} AT91S_MciDeviceFeatures, *AT91PS_MciDeviceFeatures ; - -/*---------------------------------------------*/ -/* MCI Device Structure Definition */ -/*---------------------------------------------*/ -typedef struct _AT91S_MciDevice -{ - AT91PS_MciDeviceDesc pMCI_DeviceDesc; // MCI device descriptor - AT91PS_MciDeviceFeatures pMCI_DeviceFeatures;// Pointer on a MCI device features array -}AT91S_MciDevice, *AT91PS_MciDevice; - -///////////////////////////////////////////////////////////////////////////////////////////////////// -// MCI_CMD Register Value -///////////////////////////////////////////////////////////////////////////////////////////////////// -#define AT91C_POWER_ON_INIT (0 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_INIT | AT91C_MCI_OPDCMD) - -///////////////////////////////////////////////////////////////// -// Class 0 & 1 commands: Basic commands and Read Stream commands -///////////////////////////////////////////////////////////////// - -#define AT91C_GO_IDLE_STATE_CMD (0 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE ) -#define AT91C_MMC_GO_IDLE_STATE_CMD (0 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_OPDCMD) -#define AT91C_MMC_SEND_OP_COND_CMD (1 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_OPDCMD) -#define AT91C_ALL_SEND_CID_CMD (2 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_136 ) -#define AT91C_MMC_ALL_SEND_CID_CMD (2 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_136 | AT91C_MCI_OPDCMD) -#define AT91C_SET_RELATIVE_ADDR_CMD (3 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) -#define AT91C_MMC_SET_RELATIVE_ADDR_CMD (3 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT | AT91C_MCI_OPDCMD) - -#define AT91C_SET_DSR_CMD (4 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_NO | AT91C_MCI_MAXLAT ) // no tested - -#define AT91C_SEL_DESEL_CARD_CMD (7 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) -#define AT91C_SEND_CSD_CMD (9 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_136 | AT91C_MCI_MAXLAT ) -#define AT91C_SEND_CID_CMD (10 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_136 | AT91C_MCI_MAXLAT ) -#define AT91C_MMC_READ_DAT_UNTIL_STOP_CMD (11 | AT91C_MCI_TRTYP_STREAM| AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRDIR | AT91C_MCI_TRCMD_START | AT91C_MCI_MAXLAT ) - -#define AT91C_STOP_TRANSMISSION_CMD (12 | AT91C_MCI_TRCMD_STOP | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) -#define AT91C_STOP_TRANSMISSION_SYNC_CMD (12 | AT91C_MCI_TRCMD_STOP | AT91C_MCI_SPCMD_SYNC | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) -#define AT91C_SEND_STATUS_CMD (13 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) -#define AT91C_GO_INACTIVE_STATE_CMD (15 | AT91C_MCI_RSPTYP_NO ) - -//*------------------------------------------------ -//* Class 2 commands: Block oriented Read commands -//*------------------------------------------------ - -#define AT91C_SET_BLOCKLEN_CMD (16 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) -#define AT91C_READ_SINGLE_BLOCK_CMD (17 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_START | AT91C_MCI_TRTYP_BLOCK | AT91C_MCI_TRDIR | AT91C_MCI_MAXLAT) -#define AT91C_READ_MULTIPLE_BLOCK_CMD (18 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_START | AT91C_MCI_TRTYP_MULTIPLE | AT91C_MCI_TRDIR | AT91C_MCI_MAXLAT) - -//*-------------------------------------------- -//* Class 3 commands: Sequential write commands -//*-------------------------------------------- - -#define AT91C_MMC_WRITE_DAT_UNTIL_STOP_CMD (20 | AT91C_MCI_TRTYP_STREAM| AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 & ~(AT91C_MCI_TRDIR) | AT91C_MCI_TRCMD_START | AT91C_MCI_MAXLAT ) // MMC - -//*------------------------------------------------ -//* Class 4 commands: Block oriented write commands -//*------------------------------------------------ - -#define AT91C_WRITE_BLOCK_CMD (24 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_START | (AT91C_MCI_TRTYP_BLOCK & ~(AT91C_MCI_TRDIR)) | AT91C_MCI_MAXLAT) -#define AT91C_WRITE_MULTIPLE_BLOCK_CMD (25 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_START | (AT91C_MCI_TRTYP_MULTIPLE & ~(AT91C_MCI_TRDIR)) | AT91C_MCI_MAXLAT) -#define AT91C_PROGRAM_CSD_CMD (27 | AT91C_MCI_RSPTYP_48 ) - - -//*---------------------------------------- -//* Class 6 commands: Group Write protect -//*---------------------------------------- - -#define AT91C_SET_WRITE_PROT_CMD (28 | AT91C_MCI_RSPTYP_48 ) -#define AT91C_CLR_WRITE_PROT_CMD (29 | AT91C_MCI_RSPTYP_48 ) -#define AT91C_SEND_WRITE_PROT_CMD (30 | AT91C_MCI_RSPTYP_48 ) - - -//*---------------------------------------- -//* Class 5 commands: Erase commands -//*---------------------------------------- - -#define AT91C_TAG_SECTOR_START_CMD (32 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_TAG_SECTOR_END_CMD (33 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_MMC_UNTAG_SECTOR_CMD (34 | AT91C_MCI_RSPTYP_48 ) -#define AT91C_MMC_TAG_ERASE_GROUP_START_CMD (35 | AT91C_MCI_RSPTYP_48 ) -#define AT91C_MMC_TAG_ERASE_GROUP_END_CMD (36 | AT91C_MCI_RSPTYP_48 ) -#define AT91C_MMC_UNTAG_ERASE_GROUP_CMD (37 | AT91C_MCI_RSPTYP_48 ) -#define AT91C_ERASE_CMD (38 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT ) - -//*---------------------------------------- -//* Class 7 commands: Lock commands -//*---------------------------------------- - -#define AT91C_LOCK_UNLOCK (42 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) // no tested - -//*----------------------------------------------- -// Class 8 commands: Application specific commands -//*----------------------------------------------- - -#define AT91C_APP_CMD (55 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_GEN_CMD (56 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) // no tested - -#define AT91C_SDCARD_SET_BUS_WIDTH_CMD (6 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_SDCARD_STATUS_CMD (13 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_SDCARD_SEND_NUM_WR_BLOCKS_CMD (22 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_SDCARD_SET_WR_BLK_ERASE_COUNT_CMD (23 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_SDCARD_APP_OP_COND_CMD (41 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO ) -#define AT91C_SDCARD_SET_CLR_CARD_DETECT_CMD (42 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_SDCARD_SEND_SCR_CMD (51 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) - -#define AT91C_SDCARD_APP_ALL_CMD (AT91C_SDCARD_SET_BUS_WIDTH_CMD +\ - AT91C_SDCARD_STATUS_CMD +\ - AT91C_SDCARD_SEND_NUM_WR_BLOCKS_CMD +\ - AT91C_SDCARD_SET_WR_BLK_ERASE_COUNT_CMD +\ - AT91C_SDCARD_APP_OP_COND_CMD +\ - AT91C_SDCARD_SET_CLR_CARD_DETECT_CMD +\ - AT91C_SDCARD_SEND_SCR_CMD) - -//*---------------------------------------- -//* Class 9 commands: IO Mode commands -//*---------------------------------------- - -#define AT91C_MMC_FAST_IO_CMD (39 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT) -#define AT91C_MMC_GO_IRQ_STATE_CMD (40 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) - -///////////////////////////////////////////////////////////////////////////////////////////////////// -// Functions returnals -///////////////////////////////////////////////////////////////////////////////////////////////////// -#define AT91C_CMD_SEND_OK 0 // Command ok -#define AT91C_CMD_SEND_ERROR -1 // Command failed -#define AT91C_INIT_OK 2 // Init Successfull -#define AT91C_INIT_ERROR 3 // Init Failed -#define AT91C_READ_OK 4 // Read Successfull -#define AT91C_READ_ERROR 5 // Read Failed -#define AT91C_WRITE_OK 6 // Write Successfull -#define AT91C_WRITE_ERROR 7 // Write Failed -#define AT91C_ERASE_OK 8 // Erase Successfull -#define AT91C_ERASE_ERROR 9 // Erase Failed -#define AT91C_CARD_SELECTED_OK 10 // Card Selection Successfull -#define AT91C_CARD_SELECTED_ERROR 11 // Card Selection Failed - -///////////////////////////////////////////////////////////////////////////////////////////////////// -// MCI_SR Errors -///////////////////////////////////////////////////////////////////////////////////////////////////// -#define AT91C_MCI_SR_ERROR (AT91C_MCI_UNRE |\ - AT91C_MCI_OVRE |\ - AT91C_MCI_DTOE |\ - AT91C_MCI_DCRCE |\ - AT91C_MCI_RTOE |\ - AT91C_MCI_RENDE |\ - AT91C_MCI_RCRCE |\ - AT91C_MCI_RDIRE |\ - AT91C_MCI_RINDE) - -//////////////////////////////////////////////////////////////////////////////////////////////////// -// OCR Register -//////////////////////////////////////////////////////////////////////////////////////////////////// -#define AT91C_VDD_16_17 (1 << 4) -#define AT91C_VDD_17_18 (1 << 5) -#define AT91C_VDD_18_19 (1 << 6) -#define AT91C_VDD_19_20 (1 << 7) -#define AT91C_VDD_20_21 (1 << 8) -#define AT91C_VDD_21_22 (1 << 9) -#define AT91C_VDD_22_23 (1 << 10) -#define AT91C_VDD_23_24 (1 << 11) -#define AT91C_VDD_24_25 (1 << 12) -#define AT91C_VDD_25_26 (1 << 13) -#define AT91C_VDD_26_27 (1 << 14) -#define AT91C_VDD_27_28 (1 << 15) -#define AT91C_VDD_28_29 (1 << 16) -#define AT91C_VDD_29_30 (1 << 17) -#define AT91C_VDD_30_31 (1 << 18) -#define AT91C_VDD_31_32 (1 << 19) -#define AT91C_VDD_32_33 (1 << 20) -#define AT91C_VDD_33_34 (1 << 21) -#define AT91C_VDD_34_35 (1 << 22) -#define AT91C_VDD_35_36 (1 << 23) -#define AT91C_CARD_POWER_UP_BUSY (1 << 31) - -#define AT91C_MMC_HOST_VOLTAGE_RANGE (AT91C_VDD_27_28 +\ - AT91C_VDD_28_29 +\ - AT91C_VDD_29_30 +\ - AT91C_VDD_30_31 +\ - AT91C_VDD_31_32 +\ - AT91C_VDD_32_33) - -//////////////////////////////////////////////////////////////////////////////////////////////////// -// CURRENT_STATE & READY_FOR_DATA in SDCard Status Register definition (response type R1) -//////////////////////////////////////////////////////////////////////////////////////////////////// -#define AT91C_SR_READY_FOR_DATA (1 << 8) // corresponds to buffer empty signalling on the bus -#define AT91C_SR_IDLE (0 << 9) -#define AT91C_SR_READY (1 << 9) -#define AT91C_SR_IDENT (2 << 9) -#define AT91C_SR_STBY (3 << 9) -#define AT91C_SR_TRAN (4 << 9) -#define AT91C_SR_DATA (5 << 9) -#define AT91C_SR_RCV (6 << 9) -#define AT91C_SR_PRG (7 << 9) -#define AT91C_SR_DIS (8 << 9) - -#define AT91C_SR_CARD_SELECTED (AT91C_SR_READY_FOR_DATA + AT91C_SR_TRAN) - -///////////////////////////////////////////////////////////////////////////////////////////////////// -// MMC CSD register header File -// AT91C_CSD_xxx_S for shift value -// AT91C_CSD_xxx_M for mask value -///////////////////////////////////////////////////////////////////////////////////////////////////// - -// First Response INT <=> CSD[3] : bits 0 to 31 -#define AT91C_CSD_BIT0_S 0 // [0:0] -#define AT91C_CSD_BIT0_M 0x01 -#define AT91C_CSD_CRC_S 1 // [7:1] -#define AT91C_CSD_CRC_M 0x7F -#define AT91C_CSD_MMC_ECC_S 8 // [9:8] reserved for MMC compatibility -#define AT91C_CSD_MMC_ECC_M 0x03 -#define AT91C_CSD_FILE_FMT_S 10 // [11:10] -#define AT91C_CSD_FILE_FMT_M 0x03 -#define AT91C_CSD_TMP_WP_S 12 // [12:12] -#define AT91C_CSD_TMP_WP_M 0x01 -#define AT91C_CSD_PERM_WP_S 13 // [13:13] -#define AT91C_CSD_PERM_WP_M 0x01 -#define AT91C_CSD_COPY_S 14 // [14:14] -#define AT91C_CSD_COPY_M 0x01 -#define AT91C_CSD_FILE_FMT_GRP_S 15 // [15:15] -#define AT91C_CSD_FILE_FMT_GRP_M 0x01 -// reserved 16 // [20:16] -// reserved 0x1F -#define AT91C_CSD_WBLOCK_P_S 21 // [21:21] -#define AT91C_CSD_WBLOCK_P_M 0x01 -#define AT91C_CSD_WBLEN_S 22 // [25:22] -#define AT91C_CSD_WBLEN_M 0x0F -#define AT91C_CSD_R2W_F_S 26 // [28:26] -#define AT91C_CSD_R2W_F_M 0x07 -#define AT91C_CSD_MMC_DEF_ECC_S 29 // [30:29] reserved for MMC compatibility -#define AT91C_CSD_MMC_DEF_ECC_M 0x03 -#define AT91C_CSD_WP_GRP_EN_S 31 // [31:31] -#define AT91C_CSD_WP_GRP_EN_M 0x01 - -// Seconde Response INT <=> CSD[2] : bits 32 to 63 -#define AT91C_CSD_v21_WP_GRP_SIZE_S 0 // [38:32] -#define AT91C_CSD_v21_WP_GRP_SIZE_M 0x7F -#define AT91C_CSD_v21_SECT_SIZE_S 7 // [45:39] -#define AT91C_CSD_v21_SECT_SIZE_M 0x7F -#define AT91C_CSD_v21_ER_BLEN_EN_S 14 // [46:46] -#define AT91C_CSD_v21_ER_BLEN_EN_M 0x01 - -#define AT91C_CSD_v22_WP_GRP_SIZE_S 0 // [36:32] -#define AT91C_CSD_v22_WP_GRP_SIZE_M 0x1F -#define AT91C_CSD_v22_ER_GRP_SIZE_S 5 // [41:37] -#define AT91C_CSD_v22_ER_GRP_SIZE_M 0x1F -#define AT91C_CSD_v22_SECT_SIZE_S 10 // [46:42] -#define AT91C_CSD_v22_SECT_SIZE_M 0x1F - -#define AT91C_CSD_C_SIZE_M_S 15 // [49:47] -#define AT91C_CSD_C_SIZE_M_M 0x07 -#define AT91C_CSD_VDD_WMAX_S 18 // [52:50] -#define AT91C_CSD_VDD_WMAX_M 0x07 -#define AT91C_CSD_VDD_WMIN_S 21 // [55:53] -#define AT91C_CSD_VDD_WMIN_M 0x07 -#define AT91C_CSD_RCUR_MAX_S 24 // [58:56] -#define AT91C_CSD_RCUR_MAX_M 0x07 -#define AT91C_CSD_RCUR_MIN_S 27 // [61:59] -#define AT91C_CSD_RCUR_MIN_M 0x07 -#define AT91C_CSD_CSIZE_L_S 30 // [63:62] <=> 2 LSB of CSIZE -#define AT91C_CSD_CSIZE_L_M 0x03 - -// Third Response INT <=> CSD[1] : bits 64 to 95 -#define AT91C_CSD_CSIZE_H_S 0 // [73:64] <=> 10 MSB of CSIZE -#define AT91C_CSD_CSIZE_H_M 0x03FF -// reserved 10 // [75:74] -// reserved 0x03 -#define AT91C_CSD_DSR_I_S 12 // [76:76] -#define AT91C_CSD_DSR_I_M 0x01 -#define AT91C_CSD_RD_B_MIS_S 13 // [77:77] -#define AT91C_CSD_RD_B_MIS_M 0x01 -#define AT91C_CSD_WR_B_MIS_S 14 // [78:78] -#define AT91C_CSD_WR_B_MIS_M 0x01 -#define AT91C_CSD_RD_B_PAR_S 15 // [79:79] -#define AT91C_CSD_RD_B_PAR_M 0x01 -#define AT91C_CSD_RD_B_LEN_S 16 // [83:80] -#define AT91C_CSD_RD_B_LEN_M 0x0F -#define AT91C_CSD_CCC_S 20 // [95:84] -#define AT91C_CSD_CCC_M 0x0FFF - -// Fourth Response INT <=> CSD[0] : bits 96 to 127 -#define AT91C_CSD_TRANS_SPEED_S 0 // [103:96] -#define AT91C_CSD_TRANS_SPEED_M 0xFF -#define AT91C_CSD_NSAC_S 8 // [111:104] -#define AT91C_CSD_NSAC_M 0xFF -#define AT91C_CSD_TAAC_S 16 // [119:112] -#define AT91C_CSD_TAAC_M 0xFF -// reserved 24 // [121:120] -// reserved 0x03 -#define AT91C_CSD_MMC_SPEC_VERS_S 26 // [125:122] reserved for MMC compatibility -#define AT91C_CSD_MMC_SPEC_VERS_M 0x0F -#define AT91C_CSD_STRUCT_S 30 // [127:126] -#define AT91C_CSD_STRUCT_M 0x03 - -///////////////////////////////////////////////////////////////////////////////////////////////////// - -#endif - diff --git a/target/linux/at91/image/dfboot/src/include/AT91RM9200.h b/target/linux/at91/image/dfboot/src/include/AT91RM9200.h deleted file mode 100644 index 0cd153b..0000000 --- a/target/linux/at91/image/dfboot/src/include/AT91RM9200.h +++ /dev/null @@ -1,2745 +0,0 @@ -// ---------------------------------------------------------------------------- -// ATMEL Microcontroller Software Support - ROUSSET - -// ---------------------------------------------------------------------------- -// The software is delivered "AS IS" without warranty or condition of any -// kind, either express, implied or statutory. This includes without -// limitation any warranty or condition with respect to merchantability or -// fitness for any particular purpose, or against the infringements of -// intellectual property rights of others. -// ---------------------------------------------------------------------------- -// File Name : AT91RM9200.h -// Object : AT91RM9200 definitions -// Generated : AT91 SW Application Group 11/19/2003 (17:20:50) -// -// CVS Reference : /AT91RM9200.pl/1.16/Fri Feb 07 10:29:51 2003// -// CVS Reference : /SYS_AT91RM9200.pl/1.2/Fri Jan 17 12:44:37 2003// -// CVS Reference : /MC_1760A.pl/1.1/Fri Aug 23 14:38:22 2002// -// CVS Reference : /AIC_1796B.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// -// CVS Reference : /PMC_2636A.pl/1.1.1.1/Fri Jun 28 09:36:48 2002// -// CVS Reference : /ST_1763B.pl/1.1/Fri Aug 23 14:41:42 2002// -// CVS Reference : /RTC_1245D.pl/1.2/Fri Jan 31 12:19:06 2003// -// CVS Reference : /PIO_1725D.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// -// CVS Reference : /DBGU_1754A.pl/1.4/Fri Jan 31 12:18:24 2003// -// CVS Reference : /UDP_1765B.pl/1.3/Fri Aug 02 14:45:38 2002// -// CVS Reference : /MCI_1764A.pl/1.2/Thu Nov 14 17:48:24 2002// -// CVS Reference : /US_1739C.pl/1.2/Fri Jul 12 07:49:25 2002// -// CVS Reference : /SPI_AT91RMxxxx.pl/1.3/Tue Nov 26 10:20:29 2002// -// CVS Reference : /SSC_1762A.pl/1.2/Fri Nov 08 13:26:39 2002// -// CVS Reference : /TC_1753B.pl/1.2/Fri Jan 31 12:19:55 2003// -// CVS Reference : /TWI_1761B.pl/1.4/Fri Feb 07 10:30:07 2003// -// CVS Reference : /PDC_1734B.pl/1.2/Thu Nov 21 16:38:23 2002// -// CVS Reference : /UHP_xxxxA.pl/1.1/Mon Jul 22 12:21:58 2002// -// CVS Reference : /EMAC_1794A.pl/1.4/Fri Jan 17 12:11:54 2003// -// CVS Reference : /EBI_1759B.pl/1.10/Fri Jan 17 12:44:29 2003// -// CVS Reference : /SMC_1783A.pl/1.3/Thu Oct 31 14:38:17 2002// -// CVS Reference : /SDRC_1758B.pl/1.2/Thu Oct 03 13:04:41 2002// -// CVS Reference : /BFC_1757B.pl/1.3/Thu Oct 31 14:38:00 2002// -// ---------------------------------------------------------------------------- - -#ifndef AT91RM9200_H -#define AT91RM9200_H - -typedef volatile unsigned int AT91_REG;// Hardware register definition - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR System Peripherals -// ***************************************************************************** -typedef struct _AT91S_SYS { - AT91_REG AIC_SMR[32]; // Source Mode Register - AT91_REG AIC_SVR[32]; // Source Vector Register - AT91_REG AIC_IVR; // IRQ Vector Register - AT91_REG AIC_FVR; // FIQ Vector Register - AT91_REG AIC_ISR; // Interrupt Status Register - AT91_REG AIC_IPR; // Interrupt Pending Register - AT91_REG AIC_IMR; // Interrupt Mask Register - AT91_REG AIC_CISR; // Core Interrupt Status Register - AT91_REG Reserved0[2]; // - AT91_REG AIC_IECR; // Interrupt Enable Command Register - AT91_REG AIC_IDCR; // Interrupt Disable Command Register - AT91_REG AIC_ICCR; // Interrupt Clear Command Register - AT91_REG AIC_ISCR; // Interrupt Set Command Register - AT91_REG AIC_EOICR; // End of Interrupt Command Register - AT91_REG AIC_SPU; // Spurious Vector Register - AT91_REG AIC_DCR; // Debug Control Register (Protect) - AT91_REG Reserved1[1]; // - AT91_REG AIC_FFER; // Fast Forcing Enable Register - AT91_REG AIC_FFDR; // Fast Forcing Disable Register - AT91_REG AIC_FFSR; // Fast Forcing Status Register - AT91_REG Reserved2[45]; // - AT91_REG DBGU_CR; // Control Register - AT91_REG DBGU_MR; // Mode Register - AT91_REG DBGU_IER; // Interrupt Enable Register - AT91_REG DBGU_IDR; // Interrupt Disable Register - AT91_REG DBGU_IMR; // Interrupt Mask Register - AT91_REG DBGU_CSR; // Channel Status Register - AT91_REG DBGU_RHR; // Receiver Holding Register - AT91_REG DBGU_THR; // Transmitter Holding Register - AT91_REG DBGU_BRGR; // Baud Rate Generator Register - AT91_REG Reserved3[7]; // - AT91_REG DBGU_C1R; // Chip ID1 Register - AT91_REG DBGU_C2R; // Chip ID2 Register - AT91_REG DBGU_FNTR; // Force NTRST Register - AT91_REG Reserved4[45]; // - AT91_REG DBGU_RPR; // Receive Pointer Register - AT91_REG DBGU_RCR; // Receive Counter Register - AT91_REG DBGU_TPR; // Transmit Pointer Register - AT91_REG DBGU_TCR; // Transmit Counter Register - AT91_REG DBGU_RNPR; // Receive Next Pointer Register - AT91_REG DBGU_RNCR; // Receive Next Counter Register - AT91_REG DBGU_TNPR; // Transmit Next Pointer Register - AT91_REG DBGU_TNCR; // Transmit Next Counter Register - AT91_REG DBGU_PTCR; // PDC Transfer Control Register - AT91_REG DBGU_PTSR; // PDC Transfer Status Register - AT91_REG Reserved5[54]; // - AT91_REG PIOA_PER; // PIO Enable Register - AT91_REG PIOA_PDR; // PIO Disable Register - AT91_REG PIOA_PSR; // PIO Status Register - AT91_REG Reserved6[1]; // - AT91_REG PIOA_OER; // Output Enable Register - AT91_REG PIOA_ODR; // Output Disable Registerr - AT91_REG PIOA_OSR; // Output Status Register - AT91_REG Reserved7[1]; // - AT91_REG PIOA_IFER; // Input Filter Enable Register - AT91_REG PIOA_IFDR; // Input Filter Disable Register - AT91_REG PIOA_IFSR; // Input Filter Status Register - AT91_REG Reserved8[1]; // - AT91_REG PIOA_SODR; // Set Output Data Register - AT91_REG PIOA_CODR; // Clear Output Data Register - AT91_REG PIOA_ODSR; // Output Data Status Register - AT91_REG PIOA_PDSR; // Pin Data Status Register - AT91_REG PIOA_IER; // Interrupt Enable Register - AT91_REG PIOA_IDR; // Interrupt Disable Register - AT91_REG PIOA_IMR; // Interrupt Mask Register - AT91_REG PIOA_ISR; // Interrupt Status Register - AT91_REG PIOA_MDER; // Multi-driver Enable Register - AT91_REG PIOA_MDDR; // Multi-driver Disable Register - AT91_REG PIOA_MDSR; // Multi-driver Status Register - AT91_REG Reserved9[1]; // - AT91_REG PIOA_PPUDR; // Pull-up Disable Register - AT91_REG PIOA_PPUER; // Pull-up Enable Register - AT91_REG PIOA_PPUSR; // Pad Pull-up Status Register - AT91_REG Reserved10[1]; // - AT91_REG PIOA_ASR; // Select A Register - AT91_REG PIOA_BSR; // Select B Register - AT91_REG PIOA_ABSR; // AB Select Status Register - AT91_REG Reserved11[9]; // - AT91_REG PIOA_OWER; // Output Write Enable Register - AT91_REG PIOA_OWDR; // Output Write Disable Register - AT91_REG PIOA_OWSR; // Output Write Status Register - AT91_REG Reserved12[85]; // - AT91_REG PIOB_PER; // PIO Enable Register - AT91_REG PIOB_PDR; // PIO Disable Register - AT91_REG PIOB_PSR; // PIO Status Register - AT91_REG Reserved13[1]; // - AT91_REG PIOB_OER; // Output Enable Register - AT91_REG PIOB_ODR; // Output Disable Registerr - AT91_REG PIOB_OSR; // Output Status Register - AT91_REG Reserved14[1]; // - AT91_REG PIOB_IFER; // Input Filter Enable Register - AT91_REG PIOB_IFDR; // Input Filter Disable Register - AT91_REG PIOB_IFSR; // Input Filter Status Register - AT91_REG Reserved15[1]; // - AT91_REG PIOB_SODR; // Set Output Data Register - AT91_REG PIOB_CODR; // Clear Output Data Register - AT91_REG PIOB_ODSR; // Output Data Status Register - AT91_REG PIOB_PDSR; // Pin Data Status Register - AT91_REG PIOB_IER; // Interrupt Enable Register - AT91_REG PIOB_IDR; // Interrupt Disable Register - AT91_REG PIOB_IMR; // Interrupt Mask Register - AT91_REG PIOB_ISR; // Interrupt Status Register - AT91_REG PIOB_MDER; // Multi-driver Enable Register - AT91_REG PIOB_MDDR; // Multi-driver Disable Register - AT91_REG PIOB_MDSR; // Multi-driver Status Register - AT91_REG Reserved16[1]; // - AT91_REG PIOB_PPUDR; // Pull-up Disable Register - AT91_REG PIOB_PPUER; // Pull-up Enable Register - AT91_REG PIOB_PPUSR; // Pad Pull-up Status Register - AT91_REG Reserved17[1]; // - AT91_REG PIOB_ASR; // Select A Register - AT91_REG PIOB_BSR; // Select B Register - AT91_REG PIOB_ABSR; // AB Select Status Register - AT91_REG Reserved18[9]; // - AT91_REG PIOB_OWER; // Output Write Enable Register - AT91_REG PIOB_OWDR; // Output Write Disable Register - AT91_REG PIOB_OWSR; // Output Write Status Register - AT91_REG Reserved19[85]; // - AT91_REG PIOC_PER; // PIO Enable Register - AT91_REG PIOC_PDR; // PIO Disable Register - AT91_REG PIOC_PSR; // PIO Status Register - AT91_REG Reserved20[1]; // - AT91_REG PIOC_OER; // Output Enable Register - AT91_REG PIOC_ODR; // Output Disable Registerr - AT91_REG PIOC_OSR; // Output Status Register - AT91_REG Reserved21[1]; // - AT91_REG PIOC_IFER; // Input Filter Enable Register - AT91_REG PIOC_IFDR; // Input Filter Disable Register - AT91_REG PIOC_IFSR; // Input Filter Status Register - AT91_REG Reserved22[1]; // - AT91_REG PIOC_SODR; // Set Output Data Register - AT91_REG PIOC_CODR; // Clear Output Data Register - AT91_REG PIOC_ODSR; // Output Data Status Register - AT91_REG PIOC_PDSR; // Pin Data Status Register - AT91_REG PIOC_IER; // Interrupt Enable Register - AT91_REG PIOC_IDR; // Interrupt Disable Register - AT91_REG PIOC_IMR; // Interrupt Mask Register - AT91_REG PIOC_ISR; // Interrupt Status Register - AT91_REG PIOC_MDER; // Multi-driver Enable Register - AT91_REG PIOC_MDDR; // Multi-driver Disable Register - AT91_REG PIOC_MDSR; // Multi-driver Status Register - AT91_REG Reserved23[1]; // - AT91_REG PIOC_PPUDR; // Pull-up Disable Register - AT91_REG PIOC_PPUER; // Pull-up Enable Register - AT91_REG PIOC_PPUSR; // Pad Pull-up Status Register - AT91_REG Reserved24[1]; // - AT91_REG PIOC_ASR; // Select A Register - AT91_REG PIOC_BSR; // Select B Register - AT91_REG PIOC_ABSR; // AB Select Status Register - AT91_REG Reserved25[9]; // - AT91_REG PIOC_OWER; // Output Write Enable Register - AT91_REG PIOC_OWDR; // Output Write Disable Register - AT91_REG PIOC_OWSR; // Output Write Status Register - AT91_REG Reserved26[85]; // - AT91_REG PIOD_PER; // PIO Enable Register - AT91_REG PIOD_PDR; // PIO Disable Register - AT91_REG PIOD_PSR; // PIO Status Register - AT91_REG Reserved27[1]; // - AT91_REG PIOD_OER; // Output Enable Register - AT91_REG PIOD_ODR; // Output Disable Registerr - AT91_REG PIOD_OSR; // Output Status Register - AT91_REG Reserved28[1]; // - AT91_REG PIOD_IFER; // Input Filter Enable Register - AT91_REG PIOD_IFDR; // Input Filter Disable Register - AT91_REG PIOD_IFSR; // Input Filter Status Register - AT91_REG Reserved29[1]; // - AT91_REG PIOD_SODR; // Set Output Data Register - AT91_REG PIOD_CODR; // Clear Output Data Register - AT91_REG PIOD_ODSR; // Output Data Status Register - AT91_REG PIOD_PDSR; // Pin Data Status Register - AT91_REG PIOD_IER; // Interrupt Enable Register - AT91_REG PIOD_IDR; // Interrupt Disable Register - AT91_REG PIOD_IMR; // Interrupt Mask Register - AT91_REG PIOD_ISR; // Interrupt Status Register - AT91_REG PIOD_MDER; // Multi-driver Enable Register - AT91_REG PIOD_MDDR; // Multi-driver Disable Register - AT91_REG PIOD_MDSR; // Multi-driver Status Register - AT91_REG Reserved30[1]; // - AT91_REG PIOD_PPUDR; // Pull-up Disable Register - AT91_REG PIOD_PPUER; // Pull-up Enable Register - AT91_REG PIOD_PPUSR; // Pad Pull-up Status Register - AT91_REG Reserved31[1]; // - AT91_REG PIOD_ASR; // Select A Register - AT91_REG PIOD_BSR; // Select B Register - AT91_REG PIOD_ABSR; // AB Select Status Register - AT91_REG Reserved32[9]; // - AT91_REG PIOD_OWER; // Output Write Enable Register - AT91_REG PIOD_OWDR; // Output Write Disable Register - AT91_REG PIOD_OWSR; // Output Write Status Register - AT91_REG Reserved33[85]; // - AT91_REG PMC_SCER; // System Clock Enable Register - AT91_REG PMC_SCDR; // System Clock Disable Register - AT91_REG PMC_SCSR; // System Clock Status Register - AT91_REG Reserved34[1]; // - AT91_REG PMC_PCER; // Peripheral Clock Enable Register - AT91_REG PMC_PCDR; // Peripheral Clock Disable Register - AT91_REG PMC_PCSR; // Peripheral Clock Status Register - AT91_REG Reserved35[1]; // - AT91_REG CKGR_MOR; // Main Oscillator Register - AT91_REG CKGR_MCFR; // Main Clock Frequency Register - AT91_REG CKGR_PLLAR; // PLL A Register - AT91_REG CKGR_PLLBR; // PLL B Register - AT91_REG PMC_MCKR; // Master Clock Register - AT91_REG Reserved36[3]; // - AT91_REG PMC_PCKR[8]; // Programmable Clock Register - AT91_REG PMC_IER; // Interrupt Enable Register - AT91_REG PMC_IDR; // Interrupt Disable Register - AT91_REG PMC_SR; // Status Register - AT91_REG PMC_IMR; // Interrupt Mask Register - AT91_REG Reserved37[36]; // - AT91_REG ST_CR; // Control Register - AT91_REG ST_PIMR; // Period Interval Mode Register - AT91_REG ST_WDMR; // Watchdog Mode Register - AT91_REG ST_RTMR; // Real-time Mode Register - AT91_REG ST_SR; // Status Register - AT91_REG ST_IER; // Interrupt Enable Register - AT91_REG ST_IDR; // Interrupt Disable Register - AT91_REG ST_IMR; // Interrupt Mask Register - AT91_REG ST_RTAR; // Real-time Alarm Register - AT91_REG ST_CRTR; // Current Real-time Register - AT91_REG Reserved38[54]; // - AT91_REG RTC_CR; // Control Register - AT91_REG RTC_MR; // Mode Register - AT91_REG RTC_TIMR; // Time Register - AT91_REG RTC_CALR; // Calendar Register - AT91_REG RTC_TIMALR; // Time Alarm Register - AT91_REG RTC_CALALR; // Calendar Alarm Register - AT91_REG RTC_SR; // Status Register - AT91_REG RTC_SCCR; // Status Clear Command Register - AT91_REG RTC_IER; // Interrupt Enable Register - AT91_REG RTC_IDR; // Interrupt Disable Register - AT91_REG RTC_IMR; // Interrupt Mask Register - AT91_REG RTC_VER; // Valid Entry Register - AT91_REG Reserved39[52]; // - AT91_REG MC_RCR; // MC Remap Control Register - AT91_REG MC_ASR; // MC Abort Status Register - AT91_REG MC_AASR; // MC Abort Address Status Register - AT91_REG Reserved40[1]; // - AT91_REG MC_PUIA[16]; // MC Protection Unit Area - AT91_REG MC_PUP; // MC Protection Unit Peripherals - AT91_REG MC_PUER; // MC Protection Unit Enable Register - AT91_REG Reserved41[2]; // - AT91_REG EBI_CSA; // Chip Select Assignment Register - AT91_REG EBI_CFGR; // Configuration Register - AT91_REG Reserved42[2]; // - AT91_REG EBI_SMC2_CSR[8]; // SMC2 Chip Select Register - AT91_REG EBI_SDRC_MR; // SDRAM Controller Mode Register - AT91_REG EBI_SDRC_TR; // SDRAM Controller Refresh Timer Register - AT91_REG EBI_SDRC_CR; // SDRAM Controller Configuration Register - AT91_REG EBI_SDRC_SRR; // SDRAM Controller Self Refresh Register - AT91_REG EBI_SDRC_LPR; // SDRAM Controller Low Power Register - AT91_REG EBI_SDRC_IER; // SDRAM Controller Interrupt Enable Register - AT91_REG EBI_SDRC_IDR; // SDRAM Controller Interrupt Disable Register - AT91_REG EBI_SDRC_IMR; // SDRAM Controller Interrupt Mask Register - AT91_REG EBI_SDRC_ISR; // SDRAM Controller Interrupt Mask Register - AT91_REG Reserved43[3]; // - AT91_REG EBI_BFC_MR; // BFC Mode Register -} AT91S_SYS, *AT91PS_SYS; - - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Memory Controller Interface -// ***************************************************************************** -typedef struct _AT91S_MC { - AT91_REG MC_RCR; // MC Remap Control Register - AT91_REG MC_ASR; // MC Abort Status Register - AT91_REG MC_AASR; // MC Abort Address Status Register - AT91_REG Reserved0[1]; // - AT91_REG MC_PUIA[16]; // MC Protection Unit Area - AT91_REG MC_PUP; // MC Protection Unit Peripherals - AT91_REG MC_PUER; // MC Protection Unit Enable Register -} AT91S_MC, *AT91PS_MC; - -// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- -#define AT91C_MC_RCB ((unsigned int) 0x1 << 0) // (MC) Remap Command Bit -// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- -#define AT91C_MC_UNDADD ((unsigned int) 0x1 << 0) // (MC) Undefined Addess Abort Status -#define AT91C_MC_MISADD ((unsigned int) 0x1 << 1) // (MC) Misaligned Addess Abort Status -#define AT91C_MC_MPU ((unsigned int) 0x1 << 2) // (MC) Memory protection Unit Abort Status -#define AT91C_MC_ABTSZ ((unsigned int) 0x3 << 8) // (MC) Abort Size Status -#define AT91C_MC_ABTSZ_BYTE ((unsigned int) 0x0 << 8) // (MC) Byte -#define AT91C_MC_ABTSZ_HWORD ((unsigned int) 0x1 << 8) // (MC) Half-word -#define AT91C_MC_ABTSZ_WORD ((unsigned int) 0x2 << 8) // (MC) Word -#define AT91C_MC_ABTTYP ((unsigned int) 0x3 << 10) // (MC) Abort Type Status -#define AT91C_MC_ABTTYP_DATAR ((unsigned int) 0x0 << 10) // (MC) Data Read -#define AT91C_MC_ABTTYP_DATAW ((unsigned int) 0x1 << 10) // (MC) Data Write -#define AT91C_MC_ABTTYP_FETCH ((unsigned int) 0x2 << 10) // (MC) Code Fetch -#define AT91C_MC_MST0 ((unsigned int) 0x1 << 16) // (MC) Master 0 Abort Source -#define AT91C_MC_MST1 ((unsigned int) 0x1 << 17) // (MC) Master 1 Abort Source -#define AT91C_MC_SVMST0 ((unsigned int) 0x1 << 24) // (MC) Saved Master 0 Abort Source -#define AT91C_MC_SVMST1 ((unsigned int) 0x1 << 25) // (MC) Saved Master 1 Abort Source -// -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area -------- -#define AT91C_MC_PROT ((unsigned int) 0x3 << 0) // (MC) Protection -#define AT91C_MC_PROT_PNAUNA ((unsigned int) 0x0) // (MC) Privilege: No Access, User: No Access -#define AT91C_MC_PROT_PRWUNA ((unsigned int) 0x1) // (MC) Privilege: Read/Write, User: No Access -#define AT91C_MC_PROT_PRWURO ((unsigned int) 0x2) // (MC) Privilege: Read/Write, User: Read Only -#define AT91C_MC_PROT_PRWURW ((unsigned int) 0x3) // (MC) Privilege: Read/Write, User: Read/Write -#define AT91C_MC_SIZE ((unsigned int) 0xF << 4) // (MC) Internal Area Size -#define AT91C_MC_SIZE_1KB ((unsigned int) 0x0 << 4) // (MC) Area size 1KByte -#define AT91C_MC_SIZE_2KB ((unsigned int) 0x1 << 4) // (MC) Area size 2KByte -#define AT91C_MC_SIZE_4KB ((unsigned int) 0x2 << 4) // (MC) Area size 4KByte -#define AT91C_MC_SIZE_8KB ((unsigned int) 0x3 << 4) // (MC) Area size 8KByte -#define AT91C_MC_SIZE_16KB ((unsigned int) 0x4 << 4) // (MC) Area size 16KByte -#define AT91C_MC_SIZE_32KB ((unsigned int) 0x5 << 4) // (MC) Area size 32KByte -#define AT91C_MC_SIZE_64KB ((unsigned int) 0x6 << 4) // (MC) Area size 64KByte -#define AT91C_MC_SIZE_128KB ((unsigned int) 0x7 << 4) // (MC) Area size 128KByte -#define AT91C_MC_SIZE_256KB ((unsigned int) 0x8 << 4) // (MC) Area size 256KByte -#define AT91C_MC_SIZE_512KB ((unsigned int) 0x9 << 4) // (MC) Area size 512KByte -#define AT91C_MC_SIZE_1MB ((unsigned int) 0xA << 4) // (MC) Area size 1MByte -#define AT91C_MC_SIZE_2MB ((unsigned int) 0xB << 4) // (MC) Area size 2MByte -#define AT91C_MC_SIZE_4MB ((unsigned int) 0xC << 4) // (MC) Area size 4MByte -#define AT91C_MC_SIZE_8MB ((unsigned int) 0xD << 4) // (MC) Area size 8MByte -#define AT91C_MC_SIZE_16MB ((unsigned int) 0xE << 4) // (MC) Area size 16MByte -#define AT91C_MC_SIZE_64MB ((unsigned int) 0xF << 4) // (MC) Area size 64MByte -#define AT91C_MC_BA ((unsigned int) 0x3FFFF << 10) // (MC) Internal Area Base Address -// -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral -------- -// -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area -------- -#define AT91C_MC_PUEB ((unsigned int) 0x1 << 0) // (MC) Protection Unit enable Bit - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Real-time Clock Alarm and Parallel Load Interface -// ***************************************************************************** -typedef struct _AT91S_RTC { - AT91_REG RTC_CR; // Control Register - AT91_REG RTC_MR; // Mode Register - AT91_REG RTC_TIMR; // Time Register - AT91_REG RTC_CALR; // Calendar Register - AT91_REG RTC_TIMALR; // Time Alarm Register - AT91_REG RTC_CALALR; // Calendar Alarm Register - AT91_REG RTC_SR; // Status Register - AT91_REG RTC_SCCR; // Status Clear Command Register - AT91_REG RTC_IER; // Interrupt Enable Register - AT91_REG RTC_IDR; // Interrupt Disable Register - AT91_REG RTC_IMR; // Interrupt Mask Register - AT91_REG RTC_VER; // Valid Entry Register -} AT91S_RTC, *AT91PS_RTC; - -// -------- RTC_CR : (RTC Offset: 0x0) RTC Control Register -------- -#define AT91C_RTC_UPDTIM ((unsigned int) 0x1 << 0) // (RTC) Update Request Time Register -#define AT91C_RTC_UPDCAL ((unsigned int) 0x1 << 1) // (RTC) Update Request Calendar Register -#define AT91C_RTC_TIMEVSEL ((unsigned int) 0x3 << 8) // (RTC) Time Event Selection -#define AT91C_RTC_TIMEVSEL_MINUTE ((unsigned int) 0x0 << 8) // (RTC) Minute change. -#define AT91C_RTC_TIMEVSEL_HOUR ((unsigned int) 0x1 << 8) // (RTC) Hour change. -#define AT91C_RTC_TIMEVSEL_DAY24 ((unsigned int) 0x2 << 8) // (RTC) Every day at midnight. -#define AT91C_RTC_TIMEVSEL_DAY12 ((unsigned int) 0x3 << 8) // (RTC) Every day at noon. -#define AT91C_RTC_CALEVSEL ((unsigned int) 0x3 << 16) // (RTC) Calendar Event Selection -#define AT91C_RTC_CALEVSEL_WEEK ((unsigned int) 0x0 << 16) // (RTC) Week change (every Monday at time 00:00:00). -#define AT91C_RTC_CALEVSEL_MONTH ((unsigned int) 0x1 << 16) // (RTC) Month change (every 01 of each month at time 00:00:00). -#define AT91C_RTC_CALEVSEL_YEAR ((unsigned int) 0x2 << 16) // (RTC) Year change (every January 1 at time 00:00:00). -// -------- RTC_MR : (RTC Offset: 0x4) RTC Mode Register -------- -#define AT91C_RTC_HRMOD ((unsigned int) 0x1 << 0) // (RTC) 12-24 hour Mode -// -------- RTC_TIMR : (RTC Offset: 0x8) RTC Time Register -------- -#define AT91C_RTC_SEC ((unsigned int) 0x7F << 0) // (RTC) Current Second -#define AT91C_RTC_MIN ((unsigned int) 0x7F << 8) // (RTC) Current Minute -#define AT91C_RTC_HOUR ((unsigned int) 0x1F << 16) // (RTC) Current Hour -#define AT91C_RTC_AMPM ((unsigned int) 0x1 << 22) // (RTC) Ante Meridiem, Post Meridiem Indicator -// -------- RTC_CALR : (RTC Offset: 0xc) RTC Calendar Register -------- -#define AT91C_RTC_CENT ((unsigned int) 0x3F << 0) // (RTC) Current Century -#define AT91C_RTC_YEAR ((unsigned int) 0xFF << 8) // (RTC) Current Year -#define AT91C_RTC_MONTH ((unsigned int) 0x1F << 16) // (RTC) Current Month -#define AT91C_RTC_DAY ((unsigned int) 0x7 << 21) // (RTC) Current Day -#define AT91C_RTC_DATE ((unsigned int) 0x3F << 24) // (RTC) Current Date -// -------- RTC_TIMALR : (RTC Offset: 0x10) RTC Time Alarm Register -------- -#define AT91C_RTC_SECEN ((unsigned int) 0x1 << 7) // (RTC) Second Alarm Enable -#define AT91C_RTC_MINEN ((unsigned int) 0x1 << 15) // (RTC) Minute Alarm -#define AT91C_RTC_HOUREN ((unsigned int) 0x1 << 23) // (RTC) Current Hour -// -------- RTC_CALALR : (RTC Offset: 0x14) RTC Calendar Alarm Register -------- -#define AT91C_RTC_MONTHEN ((unsigned int) 0x1 << 23) // (RTC) Month Alarm Enable -#define AT91C_RTC_DATEEN ((unsigned int) 0x1 << 31) // (RTC) Date Alarm Enable -// -------- RTC_SR : (RTC Offset: 0x18) RTC Status Register -------- -#define AT91C_RTC_ACKUPD ((unsigned int) 0x1 << 0) // (RTC) Acknowledge for Update -#define AT91C_RTC_ALARM ((unsigned int) 0x1 << 1) // (RTC) Alarm Flag -#define AT91C_RTC_SECEV ((unsigned int) 0x1 << 2) // (RTC) Second Event -#define AT91C_RTC_TIMEV ((unsigned int) 0x1 << 3) // (RTC) Time Event -#define AT91C_RTC_CALEV ((unsigned int) 0x1 << 4) // (RTC) Calendar event -// -------- RTC_SCCR : (RTC Offset: 0x1c) RTC Status Clear Command Register -------- -// -------- RTC_IER : (RTC Offset: 0x20) RTC Interrupt Enable Register -------- -// -------- RTC_IDR : (RTC Offset: 0x24) RTC Interrupt Disable Register -------- -// -------- RTC_IMR : (RTC Offset: 0x28) RTC Interrupt Mask Register -------- -// -------- RTC_VER : (RTC Offset: 0x2c) RTC Valid Entry Register -------- -#define AT91C_RTC_NVTIM ((unsigned int) 0x1 << 0) // (RTC) Non valid Time -#define AT91C_RTC_NVCAL ((unsigned int) 0x1 << 1) // (RTC) Non valid Calendar -#define AT91C_RTC_NVTIMALR ((unsigned int) 0x1 << 2) // (RTC) Non valid time Alarm -#define AT91C_RTC_NVCALALR ((unsigned int) 0x1 << 3) // (RTC) Nonvalid Calendar Alarm - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR System Timer Interface -// ***************************************************************************** -typedef struct _AT91S_ST { - AT91_REG ST_CR; // Control Register - AT91_REG ST_PIMR; // Period Interval Mode Register - AT91_REG ST_WDMR; // Watchdog Mode Register - AT91_REG ST_RTMR; // Real-time Mode Register - AT91_REG ST_SR; // Status Register - AT91_REG ST_IER; // Interrupt Enable Register - AT91_REG ST_IDR; // Interrupt Disable Register - AT91_REG ST_IMR; // Interrupt Mask Register - AT91_REG ST_RTAR; // Real-time Alarm Register - AT91_REG ST_CRTR; // Current Real-time Register -} AT91S_ST, *AT91PS_ST; - -// -------- ST_CR : (ST Offset: 0x0) System Timer Control Register -------- -#define AT91C_ST_WDRST ((unsigned int) 0x1 << 0) // (ST) Watchdog Timer Restart -// -------- ST_PIMR : (ST Offset: 0x4) System Timer Period Interval Mode Register -------- -#define AT91C_ST_PIV ((unsigned int) 0xFFFF << 0) // (ST) Watchdog Timer Restart -// -------- ST_WDMR : (ST Offset: 0x8) System Timer Watchdog Mode Register -------- -#define AT91C_ST_WDV ((unsigned int) 0xFFFF << 0) // (ST) Watchdog Timer Restart -#define AT91C_ST_RSTEN ((unsigned int) 0x1 << 16) // (ST) Reset Enable -#define AT91C_ST_EXTEN ((unsigned int) 0x1 << 17) // (ST) External Signal Assertion Enable -// -------- ST_RTMR : (ST Offset: 0xc) System Timer Real-time Mode Register -------- -#define AT91C_ST_RTPRES ((unsigned int) 0xFFFF << 0) // (ST) Real-time Timer Prescaler Value -// -------- ST_SR : (ST Offset: 0x10) System Timer Status Register -------- -#define AT91C_ST_PITS ((unsigned int) 0x1 << 0) // (ST) Period Interval Timer Interrupt -#define AT91C_ST_WDOVF ((unsigned int) 0x1 << 1) // (ST) Watchdog Overflow -#define AT91C_ST_RTTINC ((unsigned int) 0x1 << 2) // (ST) Real-time Timer Increment -#define AT91C_ST_ALMS ((unsigned int) 0x1 << 3) // (ST) Alarm Status -// -------- ST_IER : (ST Offset: 0x14) System Timer Interrupt Enable Register -------- -// -------- ST_IDR : (ST Offset: 0x18) System Timer Interrupt Disable Register -------- -// -------- ST_IMR : (ST Offset: 0x1c) System Timer Interrupt Mask Register -------- -// -------- ST_RTAR : (ST Offset: 0x20) System Timer Real-time Alarm Register -------- -#define AT91C_ST_ALMV ((unsigned int) 0xFFFFF << 0) // (ST) Alarm Value Value -// -------- ST_CRTR : (ST Offset: 0x24) System Timer Current Real-time Register -------- -#define AT91C_ST_CRTV ((unsigned int) 0xFFFFF << 0) // (ST) Current Real-time Value - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Power Management Controler -// ***************************************************************************** -typedef struct _AT91S_PMC { - AT91_REG PMC_SCER; // System Clock Enable Register - AT91_REG PMC_SCDR; // System Clock Disable Register - AT91_REG PMC_SCSR; // System Clock Status Register - AT91_REG Reserved0[1]; // - AT91_REG PMC_PCER; // Peripheral Clock Enable Register - AT91_REG PMC_PCDR; // Peripheral Clock Disable Register - AT91_REG PMC_PCSR; // Peripheral Clock Status Register - AT91_REG Reserved1[5]; // - AT91_REG PMC_MCKR; // Master Clock Register - AT91_REG Reserved2[3]; // - AT91_REG PMC_PCKR[8]; // Programmable Clock Register - AT91_REG PMC_IER; // Interrupt Enable Register - AT91_REG PMC_IDR; // Interrupt Disable Register - AT91_REG PMC_SR; // Status Register - AT91_REG PMC_IMR; // Interrupt Mask Register -} AT91S_PMC, *AT91PS_PMC; - -// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- -#define AT91C_PMC_PCK ((unsigned int) 0x1 << 0) // (PMC) Processor Clock -#define AT91C_PMC_UDP ((unsigned int) 0x1 << 1) // (PMC) USB Device Port Clock -#define AT91C_PMC_MCKUDP ((unsigned int) 0x1 << 2) // (PMC) USB Device Port Master Clock Automatic Disable on Suspend -#define AT91C_PMC_UHP ((unsigned int) 0x1 << 4) // (PMC) USB Host Port Clock -#define AT91C_PMC_PCK0 ((unsigned int) 0x1 << 8) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK1 ((unsigned int) 0x1 << 9) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK2 ((unsigned int) 0x1 << 10) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK3 ((unsigned int) 0x1 << 11) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK4 ((unsigned int) 0x1 << 12) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK5 ((unsigned int) 0x1 << 13) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK6 ((unsigned int) 0x1 << 14) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK7 ((unsigned int) 0x1 << 15) // (PMC) Programmable Clock Output -// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- -// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- -// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- -#define AT91C_PMC_CSS ((unsigned int) 0x3 << 0) // (PMC) Programmable Clock Selection -#define AT91C_PMC_CSS_SLOW_CLK ((unsigned int) 0x0) // (PMC) Slow Clock is selected -#define AT91C_PMC_CSS_MAIN_CLK ((unsigned int) 0x1) // (PMC) Main Clock is selected -#define AT91C_PMC_CSS_PLLA_CLK ((unsigned int) 0x2) // (PMC) Clock from PLL A is selected -#define AT91C_PMC_CSS_PLLB_CLK ((unsigned int) 0x3) // (PMC) Clock from PLL B is selected -#define AT91C_PMC_PRES ((unsigned int) 0x7 << 2) // (PMC) Programmable Clock Prescaler -#define AT91C_PMC_PRES_CLK ((unsigned int) 0x0 << 2) // (PMC) Selected clock -#define AT91C_PMC_PRES_CLK_2 ((unsigned int) 0x1 << 2) // (PMC) Selected clock divided by 2 -#define AT91C_PMC_PRES_CLK_4 ((unsigned int) 0x2 << 2) // (PMC) Selected clock divided by 4 -#define AT91C_PMC_PRES_CLK_8 ((unsigned int) 0x3 << 2) // (PMC) Selected clock divided by 8 -#define AT91C_PMC_PRES_CLK_16 ((unsigned int) 0x4 << 2) // (PMC) Selected clock divided by 16 -#define AT91C_PMC_PRES_CLK_32 ((unsigned int) 0x5 << 2) // (PMC) Selected clock divided by 32 -#define AT91C_PMC_PRES_CLK_64 ((unsigned int) 0x6 << 2) // (PMC) Selected clock divided by 64 -#define AT91C_PMC_MDIV ((unsigned int) 0x3 << 8) // (PMC) Master Clock Division -#define AT91C_PMC_MDIV_1 ((unsigned int) 0x0 << 8) // (PMC) The master clock and the processor clock are the same -#define AT91C_PMC_MDIV_2 ((unsigned int) 0x1 << 8) // (PMC) The processor clock is twice as fast as the master clock -#define AT91C_PMC_MDIV_3 ((unsigned int) 0x2 << 8) // (PMC) The processor clock is three times faster than the master clock -#define AT91C_PMC_MDIV_4 ((unsigned int) 0x3 << 8) // (PMC) The processor clock is four times faster than the master clock -// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- -// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- -#define AT91C_PMC_MOSCS ((unsigned int) 0x1 << 0) // (PMC) MOSC Status/Enable/Disable/Mask -#define AT91C_PMC_LOCKA ((unsigned int) 0x1 << 1) // (PMC) PLL A Status/Enable/Disable/Mask -#define AT91C_PMC_LOCKB ((unsigned int) 0x1 << 2) // (PMC) PLL B Status/Enable/Disable/Mask -#define AT91C_PMC_MCKRDY ((unsigned int) 0x1 << 3) // (PMC) MCK_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK0RDY ((unsigned int) 0x1 << 8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK1RDY ((unsigned int) 0x1 << 9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK2RDY ((unsigned int) 0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK3RDY ((unsigned int) 0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK4RDY ((unsigned int) 0x1 << 12) // (PMC) PCK4_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK5RDY ((unsigned int) 0x1 << 13) // (PMC) PCK5_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK6RDY ((unsigned int) 0x1 << 14) // (PMC) PCK6_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK7RDY ((unsigned int) 0x1 << 15) // (PMC) PCK7_RDY Status/Enable/Disable/Mask -// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- -// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- -// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Clock Generator Controler -// ***************************************************************************** -typedef struct _AT91S_CKGR { - AT91_REG CKGR_MOR; // Main Oscillator Register - AT91_REG CKGR_MCFR; // Main Clock Frequency Register - AT91_REG CKGR_PLLAR; // PLL A Register - AT91_REG CKGR_PLLBR; // PLL B Register -} AT91S_CKGR, *AT91PS_CKGR; - -// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- -#define AT91C_CKGR_MOSCEN ((unsigned int) 0x1 << 0) // (CKGR) Main Oscillator Enable -#define AT91C_CKGR_OSCTEST ((unsigned int) 0x1 << 1) // (CKGR) Oscillator Test -#define AT91C_CKGR_OSCOUNT ((unsigned int) 0xFF << 8) // (CKGR) Main Oscillator Start-up Time -// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- -#define AT91C_CKGR_MAINF ((unsigned int) 0xFFFF << 0) // (CKGR) Main Clock Frequency -#define AT91C_CKGR_MAINRDY ((unsigned int) 0x1 << 16) // (CKGR) Main Clock Ready -// -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- -#define AT91C_CKGR_DIVA ((unsigned int) 0xFF << 0) // (CKGR) Divider Selected -#define AT91C_CKGR_DIVA_0 ((unsigned int) 0x0) // (CKGR) Divider output is 0 -#define AT91C_CKGR_DIVA_BYPASS ((unsigned int) 0x1) // (CKGR) Divider is bypassed -#define AT91C_CKGR_PLLACOUNT ((unsigned int) 0x3F << 8) // (CKGR) PLL A Counter -#define AT91C_CKGR_OUTA ((unsigned int) 0x3 << 14) // (CKGR) PLL A Output Frequency Range -#define AT91C_CKGR_OUTA_0 ((unsigned int) 0x0 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_OUTA_1 ((unsigned int) 0x1 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_OUTA_2 ((unsigned int) 0x2 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_OUTA_3 ((unsigned int) 0x3 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_MULA ((unsigned int) 0x7FF << 16) // (CKGR) PLL A Multiplier -#define AT91C_CKGR_SRCA ((unsigned int) 0x1 << 29) // (CKGR) PLL A Source -// -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- -#define AT91C_CKGR_DIVB ((unsigned int) 0xFF << 0) // (CKGR) Divider Selected -#define AT91C_CKGR_DIVB_0 ((unsigned int) 0x0) // (CKGR) Divider output is 0 -#define AT91C_CKGR_DIVB_BYPASS ((unsigned int) 0x1) // (CKGR) Divider is bypassed -#define AT91C_CKGR_PLLBCOUNT ((unsigned int) 0x3F << 8) // (CKGR) PLL B Counter -#define AT91C_CKGR_OUTB ((unsigned int) 0x3 << 14) // (CKGR) PLL B Output Frequency Range -#define AT91C_CKGR_OUTB_0 ((unsigned int) 0x0 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_OUTB_1 ((unsigned int) 0x1 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_OUTB_2 ((unsigned int) 0x2 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_OUTB_3 ((unsigned int) 0x3 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_MULB ((unsigned int) 0x7FF << 16) // (CKGR) PLL B Multiplier -#define AT91C_CKGR_USB_96M ((unsigned int) 0x1 << 28) // (CKGR) Divider for USB Ports -#define AT91C_CKGR_USB_PLL ((unsigned int) 0x1 << 29) // (CKGR) PLL Use - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Parallel Input Output Controler -// ***************************************************************************** -typedef struct _AT91S_PIO { - AT91_REG PIO_PER; // PIO Enable Register - AT91_REG PIO_PDR; // PIO Disable Register - AT91_REG PIO_PSR; // PIO Status Register - AT91_REG Reserved0[1]; // - AT91_REG PIO_OER; // Output Enable Register - AT91_REG PIO_ODR; // Output Disable Registerr - AT91_REG PIO_OSR; // Output Status Register - AT91_REG Reserved1[1]; // - AT91_REG PIO_IFER; // Input Filter Enable Register - AT91_REG PIO_IFDR; // Input Filter Disable Register - AT91_REG PIO_IFSR; // Input Filter Status Register - AT91_REG Reserved2[1]; // - AT91_REG PIO_SODR; // Set Output Data Register - AT91_REG PIO_CODR; // Clear Output Data Register - AT91_REG PIO_ODSR; // Output Data Status Register - AT91_REG PIO_PDSR; // Pin Data Status Register - AT91_REG PIO_IER; // Interrupt Enable Register - AT91_REG PIO_IDR; // Interrupt Disable Register - AT91_REG PIO_IMR; // Interrupt Mask Register - AT91_REG PIO_ISR; // Interrupt Status Register - AT91_REG PIO_MDER; // Multi-driver Enable Register - AT91_REG PIO_MDDR; // Multi-driver Disable Register - AT91_REG PIO_MDSR; // Multi-driver Status Register - AT91_REG Reserved3[1]; // - AT91_REG PIO_PPUDR; // Pull-up Disable Register - AT91_REG PIO_PPUER; // Pull-up Enable Register - AT91_REG PIO_PPUSR; // Pad Pull-up Status Register - AT91_REG Reserved4[1]; // - AT91_REG PIO_ASR; // Select A Register - AT91_REG PIO_BSR; // Select B Register - AT91_REG PIO_ABSR; // AB Select Status Register - AT91_REG Reserved5[9]; // - AT91_REG PIO_OWER; // Output Write Enable Register - AT91_REG PIO_OWDR; // Output Write Disable Register - AT91_REG PIO_OWSR; // Output Write Status Register -} AT91S_PIO, *AT91PS_PIO; - - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Debug Unit -// ***************************************************************************** -typedef struct _AT91S_DBGU { - AT91_REG DBGU_CR; // Control Register - AT91_REG DBGU_MR; // Mode Register - AT91_REG DBGU_IER; // Interrupt Enable Register - AT91_REG DBGU_IDR; // Interrupt Disable Register - AT91_REG DBGU_IMR; // Interrupt Mask Register - AT91_REG DBGU_CSR; // Channel Status Register - AT91_REG DBGU_RHR; // Receiver Holding Register - AT91_REG DBGU_THR; // Transmitter Holding Register - AT91_REG DBGU_BRGR; // Baud Rate Generator Register - AT91_REG Reserved0[7]; // - AT91_REG DBGU_C1R; // Chip ID1 Register - AT91_REG DBGU_C2R; // Chip ID2 Register - AT91_REG DBGU_FNTR; // Force NTRST Register - AT91_REG Reserved1[45]; // - AT91_REG DBGU_RPR; // Receive Pointer Register - AT91_REG DBGU_RCR; // Receive Counter Register - AT91_REG DBGU_TPR; // Transmit Pointer Register - AT91_REG DBGU_TCR; // Transmit Counter Register - AT91_REG DBGU_RNPR; // Receive Next Pointer Register - AT91_REG DBGU_RNCR; // Receive Next Counter Register - AT91_REG DBGU_TNPR; // Transmit Next Pointer Register - AT91_REG DBGU_TNCR; // Transmit Next Counter Register - AT91_REG DBGU_PTCR; // PDC Transfer Control Register - AT91_REG DBGU_PTSR; // PDC Transfer Status Register -} AT91S_DBGU, *AT91PS_DBGU; - -// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- -#define AT91C_US_RSTRX ((unsigned int) 0x1 << 2) // (DBGU) Reset Receiver -#define AT91C_US_RSTTX ((unsigned int) 0x1 << 3) // (DBGU) Reset Transmitter -#define AT91C_US_RXEN ((unsigned int) 0x1 << 4) // (DBGU) Receiver Enable -#define AT91C_US_RXDIS ((unsigned int) 0x1 << 5) // (DBGU) Receiver Disable -#define AT91C_US_TXEN ((unsigned int) 0x1 << 6) // (DBGU) Transmitter Enable -#define AT91C_US_TXDIS ((unsigned int) 0x1 << 7) // (DBGU) Transmitter Disable -// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- -#define AT91C_US_PAR ((unsigned int) 0x7 << 9) // (DBGU) Parity type -#define AT91C_US_PAR_EVEN ((unsigned int) 0x0 << 9) // (DBGU) Even Parity -#define AT91C_US_PAR_ODD ((unsigned int) 0x1 << 9) // (DBGU) Odd Parity -#define AT91C_US_PAR_SPACE ((unsigned int) 0x2 << 9) // (DBGU) Parity forced to 0 (Space) -#define AT91C_US_PAR_MARK ((unsigned int) 0x3 << 9) // (DBGU) Parity forced to 1 (Mark) -#define AT91C_US_PAR_NONE ((unsigned int) 0x4 << 9) // (DBGU) No Parity -#define AT91C_US_PAR_MULTI_DROP ((unsigned int) 0x6 << 9) // (DBGU) Multi-drop mode -#define AT91C_US_CHMODE ((unsigned int) 0x3 << 14) // (DBGU) Channel Mode -#define AT91C_US_CHMODE_NORMAL ((unsigned int) 0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART. -#define AT91C_US_CHMODE_AUTO ((unsigned int) 0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin. -#define AT91C_US_CHMODE_LOCAL ((unsigned int) 0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal. -#define AT91C_US_CHMODE_REMOTE ((unsigned int) 0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin. -// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- -#define AT91C_US_RXRDY ((unsigned int) 0x1 << 0) // (DBGU) RXRDY Interrupt -#define AT91C_US_TXRDY ((unsigned int) 0x1 << 1) // (DBGU) TXRDY Interrupt -#define AT91C_US_ENDRX ((unsigned int) 0x1 << 3) // (DBGU) End of Receive Transfer Interrupt -#define AT91C_US_ENDTX ((unsigned int) 0x1 << 4) // (DBGU) End of Transmit Interrupt -#define AT91C_US_OVRE ((unsigned int) 0x1 << 5) // (DBGU) Overrun Interrupt -#define AT91C_US_FRAME ((unsigned int) 0x1 << 6) // (DBGU) Framing Error Interrupt -#define AT91C_US_PARE ((unsigned int) 0x1 << 7) // (DBGU) Parity Error Interrupt -#define AT91C_US_TXEMPTY ((unsigned int) 0x1 << 9) // (DBGU) TXEMPTY Interrupt -#define AT91C_US_TXBUFE ((unsigned int) 0x1 << 11) // (DBGU) TXBUFE Interrupt -#define AT91C_US_RXBUFF ((unsigned int) 0x1 << 12) // (DBGU) RXBUFF Interrupt -#define AT91C_US_COMM_TX ((unsigned int) 0x1 << 30) // (DBGU) COMM_TX Interrupt -#define AT91C_US_COMM_RX ((unsigned int) 0x1 << 31) // (DBGU) COMM_RX Interrupt -// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- -// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- -// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- -// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- -#define AT91C_US_FORCE_NTRST ((unsigned int) 0x1 << 0) // (DBGU) Force NTRST in JTAG - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Peripheral Data Controller -// ***************************************************************************** -typedef struct _AT91S_PDC { - AT91_REG PDC_RPR; // Receive Pointer Register - AT91_REG PDC_RCR; // Receive Counter Register - AT91_REG PDC_TPR; // Transmit Pointer Register - AT91_REG PDC_TCR; // Transmit Counter Register - AT91_REG PDC_RNPR; // Receive Next Pointer Register - AT91_REG PDC_RNCR; // Receive Next Counter Register - AT91_REG PDC_TNPR; // Transmit Next Pointer Register - AT91_REG PDC_TNCR; // Transmit Next Counter Register - AT91_REG PDC_PTCR; // PDC Transfer Control Register - AT91_REG PDC_PTSR; // PDC Transfer Status Register -} AT91S_PDC, *AT91PS_PDC; - -// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- -#define AT91C_PDC_RXTEN ((unsigned int) 0x1 << 0) // (PDC) Receiver Transfer Enable -#define AT91C_PDC_RXTDIS ((unsigned int) 0x1 << 1) // (PDC) Receiver Transfer Disable -#define AT91C_PDC_TXTEN ((unsigned int) 0x1 << 8) // (PDC) Transmitter Transfer Enable -#define AT91C_PDC_TXTDIS ((unsigned int) 0x1 << 9) // (PDC) Transmitter Transfer Disable -// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Advanced Interrupt Controller -// ***************************************************************************** -typedef struct _AT91S_AIC { - AT91_REG AIC_SMR[32]; // Source Mode Register - AT91_REG AIC_SVR[32]; // Source Vector Register - AT91_REG AIC_IVR; // IRQ Vector Register - AT91_REG AIC_FVR; // FIQ Vector Register - AT91_REG AIC_ISR; // Interrupt Status Register - AT91_REG AIC_IPR; // Interrupt Pending Register - AT91_REG AIC_IMR; // Interrupt Mask Register - AT91_REG AIC_CISR; // Core Interrupt Status Register - AT91_REG Reserved0[2]; // - AT91_REG AIC_IECR; // Interrupt Enable Command Register - AT91_REG AIC_IDCR; // Interrupt Disable Command Register - AT91_REG AIC_ICCR; // Interrupt Clear Command Register - AT91_REG AIC_ISCR; // Interrupt Set Command Register - AT91_REG AIC_EOICR; // End of Interrupt Command Register - AT91_REG AIC_SPU; // Spurious Vector Register - AT91_REG AIC_DCR; // Debug Control Register (Protect) - AT91_REG Reserved1[1]; // - AT91_REG AIC_FFER; // Fast Forcing Enable Register - AT91_REG AIC_FFDR; // Fast Forcing Disable Register - AT91_REG AIC_FFSR; // Fast Forcing Status Register -} AT91S_AIC, *AT91PS_AIC; - -// -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- -#define AT91C_AIC_PRIOR ((unsigned int) 0x7 << 0) // (AIC) Priority Level -#define AT91C_AIC_PRIOR_LOWEST ((unsigned int) 0x0) // (AIC) Lowest priority level -#define AT91C_AIC_PRIOR_HIGHEST ((unsigned int) 0x7) // (AIC) Highest priority level -#define AT91C_AIC_SRCTYPE ((unsigned int) 0x3 << 5) // (AIC) Interrupt Source Type -#define AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE ((unsigned int) 0x0 << 5) // (AIC) Internal Sources Code Label Level Sensitive -#define AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED ((unsigned int) 0x1 << 5) // (AIC) Internal Sources Code Label Edge triggered -#define AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL ((unsigned int) 0x2 << 5) // (AIC) External Sources Code Label High-level Sensitive -#define AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE ((unsigned int) 0x3 << 5) // (AIC) External Sources Code Label Positive Edge triggered -// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- -#define AT91C_AIC_NFIQ ((unsigned int) 0x1 << 0) // (AIC) NFIQ Status -#define AT91C_AIC_NIRQ ((unsigned int) 0x1 << 1) // (AIC) NIRQ Status -// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- -#define AT91C_AIC_DCR_PROT ((unsigned int) 0x1 << 0) // (AIC) Protection Mode -#define AT91C_AIC_DCR_GMSK ((unsigned int) 0x1 << 1) // (AIC) General Mask - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Serial Parallel Interface -// ***************************************************************************** -typedef struct _AT91S_SPI { - AT91_REG SPI_CR; // Control Register - AT91_REG SPI_MR; // Mode Register - AT91_REG SPI_RDR; // Receive Data Register - AT91_REG SPI_TDR; // Transmit Data Register - AT91_REG SPI_SR; // Status Register - AT91_REG SPI_IER; // Interrupt Enable Register - AT91_REG SPI_IDR; // Interrupt Disable Register - AT91_REG SPI_IMR; // Interrupt Mask Register - AT91_REG Reserved0[4]; // - AT91_REG SPI_CSR[4]; // Chip Select Register - AT91_REG Reserved1[48]; // - AT91_REG SPI_RPR; // Receive Pointer Register - AT91_REG SPI_RCR; // Receive Counter Register - AT91_REG SPI_TPR; // Transmit Pointer Register - AT91_REG SPI_TCR; // Transmit Counter Register - AT91_REG SPI_RNPR; // Receive Next Pointer Register - AT91_REG SPI_RNCR; // Receive Next Counter Register - AT91_REG SPI_TNPR; // Transmit Next Pointer Register - AT91_REG SPI_TNCR; // Transmit Next Counter Register - AT91_REG SPI_PTCR; // PDC Transfer Control Register - AT91_REG SPI_PTSR; // PDC Transfer Status Register -} AT91S_SPI, *AT91PS_SPI; - -// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- -#define AT91C_SPI_SPIEN ((unsigned int) 0x1 << 0) // (SPI) SPI Enable -#define AT91C_SPI_SPIDIS ((unsigned int) 0x1 << 1) // (SPI) SPI Disable -#define AT91C_SPI_SWRST ((unsigned int) 0x1 << 7) // (SPI) SPI Software reset -// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- -#define AT91C_SPI_MSTR ((unsigned int) 0x1 << 0) // (SPI) Master/Slave Mode -#define AT91C_SPI_PS ((unsigned int) 0x1 << 1) // (SPI) Peripheral Select -#define AT91C_SPI_PS_FIXED ((unsigned int) 0x0 << 1) // (SPI) Fixed Peripheral Select -#define AT91C_SPI_PS_VARIABLE ((unsigned int) 0x1 << 1) // (SPI) Variable Peripheral Select -#define AT91C_SPI_PCSDEC ((unsigned int) 0x1 << 2) // (SPI) Chip Select Decode -#define AT91C_SPI_DIV32 ((unsigned int) 0x1 << 3) // (SPI) Clock Selection -#define AT91C_SPI_MODFDIS ((unsigned int) 0x1 << 4) // (SPI) Mode Fault Detection -#define AT91C_SPI_LLB ((unsigned int) 0x1 << 7) // (SPI) Clock Selection -#define AT91C_SPI_PCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select -#define AT91C_SPI_DLYBCS ((unsigned int) 0xFF << 24) // (SPI) Delay Between Chip Selects -// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- -#define AT91C_SPI_RD ((unsigned int) 0xFFFF << 0) // (SPI) Receive Data -#define AT91C_SPI_RPCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select Status -// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- -#define AT91C_SPI_TD ((unsigned int) 0xFFFF << 0) // (SPI) Transmit Data -#define AT91C_SPI_TPCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select Status -// -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- -#define AT91C_SPI_RDRF ((unsigned int) 0x1 << 0) // (SPI) Receive Data Register Full -#define AT91C_SPI_TDRE ((unsigned int) 0x1 << 1) // (SPI) Transmit Data Register Empty -#define AT91C_SPI_MODF ((unsigned int) 0x1 << 2) // (SPI) Mode Fault Error -#define AT91C_SPI_OVRES ((unsigned int) 0x1 << 3) // (SPI) Overrun Error Status -#define AT91C_SPI_SPENDRX ((unsigned int) 0x1 << 4) // (SPI) End of Receiver Transfer -#define AT91C_SPI_SPENDTX ((unsigned int) 0x1 << 5) // (SPI) End of Receiver Transfer -#define AT91C_SPI_RXBUFF ((unsigned int) 0x1 << 6) // (SPI) RXBUFF Interrupt -#define AT91C_SPI_TXBUFE ((unsigned int) 0x1 << 7) // (SPI) TXBUFE Interrupt -#define AT91C_SPI_SPIENS ((unsigned int) 0x1 << 16) // (SPI) Enable Status -// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- -// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- -// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- -// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- -#define AT91C_SPI_CPOL ((unsigned int) 0x1 << 0) // (SPI) Clock Polarity -#define AT91C_SPI_NCPHA ((unsigned int) 0x1 << 1) // (SPI) Clock Phase -#define AT91C_SPI_BITS ((unsigned int) 0xF << 4) // (SPI) Bits Per Transfer -#define AT91C_SPI_BITS_8 ((unsigned int) 0x0 << 4) // (SPI) 8 Bits Per transfer -#define AT91C_SPI_BITS_9 ((unsigned int) 0x1 << 4) // (SPI) 9 Bits Per transfer -#define AT91C_SPI_BITS_10 ((unsigned int) 0x2 << 4) // (SPI) 10 Bits Per transfer -#define AT91C_SPI_BITS_11 ((unsigned int) 0x3 << 4) // (SPI) 11 Bits Per transfer -#define AT91C_SPI_BITS_12 ((unsigned int) 0x4 << 4) // (SPI) 12 Bits Per transfer -#define AT91C_SPI_BITS_13 ((unsigned int) 0x5 << 4) // (SPI) 13 Bits Per transfer -#define AT91C_SPI_BITS_14 ((unsigned int) 0x6 << 4) // (SPI) 14 Bits Per transfer -#define AT91C_SPI_BITS_15 ((unsigned int) 0x7 << 4) // (SPI) 15 Bits Per transfer -#define AT91C_SPI_BITS_16 ((unsigned int) 0x8 << 4) // (SPI) 16 Bits Per transfer -#define AT91C_SPI_SCBR ((unsigned int) 0xFF << 8) // (SPI) Serial Clock Baud Rate -#define AT91C_SPI_DLYBS ((unsigned int) 0xFF << 16) // (SPI) Serial Clock Baud Rate -#define AT91C_SPI_DLYBCT ((unsigned int) 0xFF << 24) // (SPI) Delay Between Consecutive Transfers - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Synchronous Serial Controller Interface -// ***************************************************************************** -typedef struct _AT91S_SSC { - AT91_REG SSC_CR; // Control Register - AT91_REG SSC_CMR; // Clock Mode Register - AT91_REG Reserved0[2]; // - AT91_REG SSC_RCMR; // Receive Clock ModeRegister - AT91_REG SSC_RFMR; // Receive Frame Mode Register - AT91_REG SSC_TCMR; // Transmit Clock Mode Register - AT91_REG SSC_TFMR; // Transmit Frame Mode Register - AT91_REG SSC_RHR; // Receive Holding Register - AT91_REG SSC_THR; // Transmit Holding Register - AT91_REG Reserved1[2]; // - AT91_REG SSC_RSHR; // Receive Sync Holding Register - AT91_REG SSC_TSHR; // Transmit Sync Holding Register - AT91_REG SSC_RC0R; // Receive Compare 0 Register - AT91_REG SSC_RC1R; // Receive Compare 1 Register - AT91_REG SSC_SR; // Status Register - AT91_REG SSC_IER; // Interrupt Enable Register - AT91_REG SSC_IDR; // Interrupt Disable Register - AT91_REG SSC_IMR; // Interrupt Mask Register - AT91_REG Reserved2[44]; // - AT91_REG SSC_RPR; // Receive Pointer Register - AT91_REG SSC_RCR; // Receive Counter Register - AT91_REG SSC_TPR; // Transmit Pointer Register - AT91_REG SSC_TCR; // Transmit Counter Register - AT91_REG SSC_RNPR; // Receive Next Pointer Register - AT91_REG SSC_RNCR; // Receive Next Counter Register - AT91_REG SSC_TNPR; // Transmit Next Pointer Register - AT91_REG SSC_TNCR; // Transmit Next Counter Register - AT91_REG SSC_PTCR; // PDC Transfer Control Register - AT91_REG SSC_PTSR; // PDC Transfer Status Register -} AT91S_SSC, *AT91PS_SSC; - -// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- -#define AT91C_SSC_RXEN ((unsigned int) 0x1 << 0) // (SSC) Receive Enable -#define AT91C_SSC_RXDIS ((unsigned int) 0x1 << 1) // (SSC) Receive Disable -#define AT91C_SSC_TXEN ((unsigned int) 0x1 << 8) // (SSC) Transmit Enable -#define AT91C_SSC_TXDIS ((unsigned int) 0x1 << 9) // (SSC) Transmit Disable -#define AT91C_SSC_SWRST ((unsigned int) 0x1 << 15) // (SSC) Software Reset -// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- -#define AT91C_SSC_CKS ((unsigned int) 0x3 << 0) // (SSC) Receive/Transmit Clock Selection -#define AT91C_SSC_CKS_DIV ((unsigned int) 0x0) // (SSC) Divided Clock -#define AT91C_SSC_CKS_TK ((unsigned int) 0x1) // (SSC) TK Clock signal -#define AT91C_SSC_CKS_RK ((unsigned int) 0x2) // (SSC) RK pin -#define AT91C_SSC_CKO ((unsigned int) 0x7 << 2) // (SSC) Receive/Transmit Clock Output Mode Selection -#define AT91C_SSC_CKO_NONE ((unsigned int) 0x0 << 2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only -#define AT91C_SSC_CKO_CONTINOUS ((unsigned int) 0x1 << 2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output -#define AT91C_SSC_CKO_DATA_TX ((unsigned int) 0x2 << 2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output -#define AT91C_SSC_CKI ((unsigned int) 0x1 << 5) // (SSC) Receive/Transmit Clock Inversion -#define AT91C_SSC_CKG ((unsigned int) 0x3 << 6) // (SSC) Receive/Transmit Clock Gating Selection -#define AT91C_SSC_CKG_NONE ((unsigned int) 0x0 << 6) // (SSC) Receive/Transmit Clock Gating: None, continuous clock -#define AT91C_SSC_CKG_LOW ((unsigned int) 0x1 << 6) // (SSC) Receive/Transmit Clock enabled only if RF Low -#define AT91C_SSC_CKG_HIGH ((unsigned int) 0x2 << 6) // (SSC) Receive/Transmit Clock enabled only if RF High -#define AT91C_SSC_START ((unsigned int) 0xF << 8) // (SSC) Receive/Transmit Start Selection -#define AT91C_SSC_START_CONTINOUS ((unsigned int) 0x0 << 8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data. -#define AT91C_SSC_START_TX ((unsigned int) 0x1 << 8) // (SSC) Transmit/Receive start -#define AT91C_SSC_START_LOW_RF ((unsigned int) 0x2 << 8) // (SSC) Detection of a low level on RF input -#define AT91C_SSC_START_HIGH_RF ((unsigned int) 0x3 << 8) // (SSC) Detection of a high level on RF input -#define AT91C_SSC_START_FALL_RF ((unsigned int) 0x4 << 8) // (SSC) Detection of a falling edge on RF input -#define AT91C_SSC_START_RISE_RF ((unsigned int) 0x5 << 8) // (SSC) Detection of a rising edge on RF input -#define AT91C_SSC_START_LEVEL_RF ((unsigned int) 0x6 << 8) // (SSC) Detection of any level change on RF input -#define AT91C_SSC_START_EDGE_RF ((unsigned int) 0x7 << 8) // (SSC) Detection of any edge on RF input -#define AT91C_SSC_START_0 ((unsigned int) 0x8 << 8) // (SSC) Compare 0 -#define AT91C_SSC_STOP ((unsigned int) 0x1 << 12) // (SSC) Receive Stop Selection -#define AT91C_SSC_STTOUT ((unsigned int) 0x1 << 15) // (SSC) Receive/Transmit Start Output Selection -#define AT91C_SSC_STTDLY ((unsigned int) 0xFF << 16) // (SSC) Receive/Transmit Start Delay -#define AT91C_SSC_PERIOD ((unsigned int) 0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection -// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- -#define AT91C_SSC_DATLEN ((unsigned int) 0x1F << 0) // (SSC) Data Length -#define AT91C_SSC_LOOP ((unsigned int) 0x1 << 5) // (SSC) Loop Mode -#define AT91C_SSC_MSBF ((unsigned int) 0x1 << 7) // (SSC) Most Significant Bit First -#define AT91C_SSC_DATNB ((unsigned int) 0xF << 8) // (SSC) Data Number per Frame -#define AT91C_SSC_FSLEN ((unsigned int) 0xF << 16) // (SSC) Receive/Transmit Frame Sync length -#define AT91C_SSC_FSOS ((unsigned int) 0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection -#define AT91C_SSC_FSOS_NONE ((unsigned int) 0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only -#define AT91C_SSC_FSOS_NEGATIVE ((unsigned int) 0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse -#define AT91C_SSC_FSOS_POSITIVE ((unsigned int) 0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse -#define AT91C_SSC_FSOS_LOW ((unsigned int) 0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer -#define AT91C_SSC_FSOS_HIGH ((unsigned int) 0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer -#define AT91C_SSC_FSOS_TOGGLE ((unsigned int) 0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer -#define AT91C_SSC_FSEDGE ((unsigned int) 0x1 << 24) // (SSC) Frame Sync Edge Detection -// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- -// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- -#define AT91C_SSC_DATDEF ((unsigned int) 0x1 << 5) // (SSC) Data Default Value -#define AT91C_SSC_FSDEN ((unsigned int) 0x1 << 23) // (SSC) Frame Sync Data Enable -// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- -#define AT91C_SSC_TXRDY ((unsigned int) 0x1 << 0) // (SSC) Transmit Ready -#define AT91C_SSC_TXEMPTY ((unsigned int) 0x1 << 1) // (SSC) Transmit Empty -#define AT91C_SSC_ENDTX ((unsigned int) 0x1 << 2) // (SSC) End Of Transmission -#define AT91C_SSC_TXBUFE ((unsigned int) 0x1 << 3) // (SSC) Transmit Buffer Empty -#define AT91C_SSC_RXRDY ((unsigned int) 0x1 << 4) // (SSC) Receive Ready -#define AT91C_SSC_OVRUN ((unsigned int) 0x1 << 5) // (SSC) Receive Overrun -#define AT91C_SSC_ENDRX ((unsigned int) 0x1 << 6) // (SSC) End of Reception -#define AT91C_SSC_RXBUFF ((unsigned int) 0x1 << 7) // (SSC) Receive Buffer Full -#define AT91C_SSC_CP0 ((unsigned int) 0x1 << 8) // (SSC) Compare 0 -#define AT91C_SSC_CP1 ((unsigned int) 0x1 << 9) // (SSC) Compare 1 -#define AT91C_SSC_TXSYN ((unsigned int) 0x1 << 10) // (SSC) Transmit Sync -#define AT91C_SSC_RXSYN ((unsigned int) 0x1 << 11) // (SSC) Receive Sync -#define AT91C_SSC_TXENA ((unsigned int) 0x1 << 16) // (SSC) Transmit Enable -#define AT91C_SSC_RXENA ((unsigned int) 0x1 << 17) // (SSC) Receive Enable -// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- -// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- -// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Usart -// ***************************************************************************** -typedef struct _AT91S_USART { - AT91_REG US_CR; // Control Register - AT91_REG US_MR; // Mode Register - AT91_REG US_IER; // Interrupt Enable Register - AT91_REG US_IDR; // Interrupt Disable Register - AT91_REG US_IMR; // Interrupt Mask Register - AT91_REG US_CSR; // Channel Status Register - AT91_REG US_RHR; // Receiver Holding Register - AT91_REG US_THR; // Transmitter Holding Register - AT91_REG US_BRGR; // Baud Rate Generator Register - AT91_REG US_RTOR; // Receiver Time-out Register - AT91_REG US_TTGR; // Transmitter Time-guard Register - AT91_REG Reserved0[5]; // - AT91_REG US_FIDI; // FI_DI_Ratio Register - AT91_REG US_NER; // Nb Errors Register - AT91_REG US_XXR; // XON_XOFF Register - AT91_REG US_IF; // IRDA_FILTER Register - AT91_REG Reserved1[44]; // - AT91_REG US_RPR; // Receive Pointer Register - AT91_REG US_RCR; // Receive Counter Register - AT91_REG US_TPR; // Transmit Pointer Register - AT91_REG US_TCR; // Transmit Counter Register - AT91_REG US_RNPR; // Receive Next Pointer Register - AT91_REG US_RNCR; // Receive Next Counter Register - AT91_REG US_TNPR; // Transmit Next Pointer Register - AT91_REG US_TNCR; // Transmit Next Counter Register - AT91_REG US_PTCR; // PDC Transfer Control Register - AT91_REG US_PTSR; // PDC Transfer Status Register -} AT91S_USART, *AT91PS_USART; - -// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- -#define AT91C_US_RSTSTA ((unsigned int) 0x1 << 8) // (USART) Reset Status Bits -#define AT91C_US_STTBRK ((unsigned int) 0x1 << 9) // (USART) Start Break -#define AT91C_US_STPBRK ((unsigned int) 0x1 << 10) // (USART) Stop Break -#define AT91C_US_STTTO ((unsigned int) 0x1 << 11) // (USART) Start Time-out -#define AT91C_US_SENDA ((unsigned int) 0x1 << 12) // (USART) Send Address -#define AT91C_US_RSTIT ((unsigned int) 0x1 << 13) // (USART) Reset Iterations -#define AT91C_US_RSTNACK ((unsigned int) 0x1 << 14) // (USART) Reset Non Acknowledge -#define AT91C_US_RETTO ((unsigned int) 0x1 << 15) // (USART) Rearm Time-out -#define AT91C_US_DTREN ((unsigned int) 0x1 << 16) // (USART) Data Terminal ready Enable -#define AT91C_US_DTRDIS ((unsigned int) 0x1 << 17) // (USART) Data Terminal ready Disable -#define AT91C_US_RTSEN ((unsigned int) 0x1 << 18) // (USART) Request to Send enable -#define AT91C_US_RTSDIS ((unsigned int) 0x1 << 19) // (USART) Request to Send Disable -// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- -#define AT91C_US_USMODE ((unsigned int) 0xF << 0) // (USART) Usart mode -#define AT91C_US_USMODE_NORMAL ((unsigned int) 0x0) // (USART) Normal -#define AT91C_US_USMODE_RS485 ((unsigned int) 0x1) // (USART) RS485 -#define AT91C_US_USMODE_HWHSH ((unsigned int) 0x2) // (USART) Hardware Handshaking -#define AT91C_US_USMODE_MODEM ((unsigned int) 0x3) // (USART) Modem -#define AT91C_US_USMODE_ISO7816_0 ((unsigned int) 0x4) // (USART) ISO7816 protocol: T = 0 -#define AT91C_US_USMODE_ISO7816_1 ((unsigned int) 0x6) // (USART) ISO7816 protocol: T = 1 -#define AT91C_US_USMODE_IRDA ((unsigned int) 0x8) // (USART) IrDA -#define AT91C_US_USMODE_SWHSH ((unsigned int) 0xC) // (USART) Software Handshaking -#define AT91C_US_CLKS ((unsigned int) 0x3 << 4) // (USART) Clock Selection (Baud Rate generator Input Clock -#define AT91C_US_CLKS_CLOCK ((unsigned int) 0x0 << 4) // (USART) Clock -#define AT91C_US_CLKS_FDIV1 ((unsigned int) 0x1 << 4) // (USART) fdiv1 -#define AT91C_US_CLKS_SLOW ((unsigned int) 0x2 << 4) // (USART) slow_clock (ARM) -#define AT91C_US_CLKS_EXT ((unsigned int) 0x3 << 4) // (USART) External (SCK) -#define AT91C_US_CHRL ((unsigned int) 0x3 << 6) // (USART) Clock Selection (Baud Rate generator Input Clock -#define AT91C_US_CHRL_5_BITS ((unsigned int) 0x0 << 6) // (USART) Character Length: 5 bits -#define AT91C_US_CHRL_6_BITS ((unsigned int) 0x1 << 6) // (USART) Character Length: 6 bits -#define AT91C_US_CHRL_7_BITS ((unsigned int) 0x2 << 6) // (USART) Character Length: 7 bits -#define AT91C_US_CHRL_8_BITS ((unsigned int) 0x3 << 6) // (USART) Character Length: 8 bits -#define AT91C_US_SYNC ((unsigned int) 0x1 << 8) // (USART) Synchronous Mode Select -#define AT91C_US_NBSTOP ((unsigned int) 0x3 << 12) // (USART) Number of Stop bits -#define AT91C_US_NBSTOP_1_BIT ((unsigned int) 0x0 << 12) // (USART) 1 stop bit -#define AT91C_US_NBSTOP_15_BIT ((unsigned int) 0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits -#define AT91C_US_NBSTOP_2_BIT ((unsigned int) 0x2 << 12) // (USART) 2 stop bits -#define AT91C_US_MSBF ((unsigned int) 0x1 << 16) // (USART) Bit Order -#define AT91C_US_MODE9 ((unsigned int) 0x1 << 17) // (USART) 9-bit Character length -#define AT91C_US_CKLO ((unsigned int) 0x1 << 18) // (USART) Clock Output Select -#define AT91C_US_OVER ((unsigned int) 0x1 << 19) // (USART) Over Sampling Mode -#define AT91C_US_INACK ((unsigned int) 0x1 << 20) // (USART) Inhibit Non Acknowledge -#define AT91C_US_DSNACK ((unsigned int) 0x1 << 21) // (USART) Disable Successive NACK -#define AT91C_US_MAX_ITER ((unsigned int) 0x1 << 24) // (USART) Number of Repetitions -#define AT91C_US_FILTER ((unsigned int) 0x1 << 28) // (USART) Receive Line Filter -// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- -#define AT91C_US_RXBRK ((unsigned int) 0x1 << 2) // (USART) Break Received/End of Break -#define AT91C_US_TIMEOUT ((unsigned int) 0x1 << 8) // (USART) Receiver Time-out -#define AT91C_US_ITERATION ((unsigned int) 0x1 << 10) // (USART) Max number of Repetitions Reached -#define AT91C_US_NACK ((unsigned int) 0x1 << 13) // (USART) Non Acknowledge -#define AT91C_US_RIIC ((unsigned int) 0x1 << 16) // (USART) Ring INdicator Input Change Flag -#define AT91C_US_DSRIC ((unsigned int) 0x1 << 17) // (USART) Data Set Ready Input Change Flag -#define AT91C_US_DCDIC ((unsigned int) 0x1 << 18) // (USART) Data Carrier Flag -#define AT91C_US_CTSIC ((unsigned int) 0x1 << 19) // (USART) Clear To Send Input Change Flag -// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- -// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- -// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- -#define AT91C_US_RI ((unsigned int) 0x1 << 20) // (USART) Image of RI Input -#define AT91C_US_DSR ((unsigned int) 0x1 << 21) // (USART) Image of DSR Input -#define AT91C_US_DCD ((unsigned int) 0x1 << 22) // (USART) Image of DCD Input -#define AT91C_US_CTS ((unsigned int) 0x1 << 23) // (USART) Image of CTS Input - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Two-wire Interface -// ***************************************************************************** -typedef struct _AT91S_TWI { - AT91_REG TWI_CR; // Control Register - AT91_REG TWI_MMR; // Master Mode Register - AT91_REG TWI_SMR; // Slave Mode Register - AT91_REG TWI_IADR; // Internal Address Register - AT91_REG TWI_CWGR; // Clock Waveform Generator Register - AT91_REG Reserved0[3]; // - AT91_REG TWI_SR; // Status Register - AT91_REG TWI_IER; // Interrupt Enable Register - AT91_REG TWI_IDR; // Interrupt Disable Register - AT91_REG TWI_IMR; // Interrupt Mask Register - AT91_REG TWI_RHR; // Receive Holding Register - AT91_REG TWI_THR; // Transmit Holding Register -} AT91S_TWI, *AT91PS_TWI; - -// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- -#define AT91C_TWI_START ((unsigned int) 0x1 << 0) // (TWI) Send a START Condition -#define AT91C_TWI_STOP ((unsigned int) 0x1 << 1) // (TWI) Send a STOP Condition -#define AT91C_TWI_MSEN ((unsigned int) 0x1 << 2) // (TWI) TWI Master Transfer Enabled -#define AT91C_TWI_MSDIS ((unsigned int) 0x1 << 3) // (TWI) TWI Master Transfer Disabled -#define AT91C_TWI_SVEN ((unsigned int) 0x1 << 4) // (TWI) TWI Slave Transfer Enabled -#define AT91C_TWI_SVDIS ((unsigned int) 0x1 << 5) // (TWI) TWI Slave Transfer Disabled -#define AT91C_TWI_SWRST ((unsigned int) 0x1 << 7) // (TWI) Software Reset -// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- -#define AT91C_TWI_IADRSZ ((unsigned int) 0x3 << 8) // (TWI) Internal Device Address Size -#define AT91C_TWI_IADRSZ_NO ((unsigned int) 0x0 << 8) // (TWI) No internal device address -#define AT91C_TWI_IADRSZ_1_BYTE ((unsigned int) 0x1 << 8) // (TWI) One-byte internal device address -#define AT91C_TWI_IADRSZ_2_BYTE ((unsigned int) 0x2 << 8) // (TWI) Two-byte internal device address -#define AT91C_TWI_IADRSZ_3_BYTE ((unsigned int) 0x3 << 8) // (TWI) Three-byte internal device address -#define AT91C_TWI_MREAD ((unsigned int) 0x1 << 12) // (TWI) Master Read Direction -#define AT91C_TWI_DADR ((unsigned int) 0x7F << 16) // (TWI) Device Address -// -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- -#define AT91C_TWI_SADR ((unsigned int) 0x7F << 16) // (TWI) Slave Device Address -// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- -#define AT91C_TWI_CLDIV ((unsigned int) 0xFF << 0) // (TWI) Clock Low Divider -#define AT91C_TWI_CHDIV ((unsigned int) 0xFF << 8) // (TWI) Clock High Divider -#define AT91C_TWI_CKDIV ((unsigned int) 0x7 << 16) // (TWI) Clock Divider -// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- -#define AT91C_TWI_TXCOMP ((unsigned int) 0x1 << 0) // (TWI) Transmission Completed -#define AT91C_TWI_RXRDY ((unsigned int) 0x1 << 1) // (TWI) Receive holding register ReaDY -#define AT91C_TWI_TXRDY ((unsigned int) 0x1 << 2) // (TWI) Transmit holding register ReaDY -#define AT91C_TWI_SVREAD ((unsigned int) 0x1 << 3) // (TWI) Slave Read -#define AT91C_TWI_SVACC ((unsigned int) 0x1 << 4) // (TWI) Slave Access -#define AT91C_TWI_GCACC ((unsigned int) 0x1 << 5) // (TWI) General Call Access -#define AT91C_TWI_OVRE ((unsigned int) 0x1 << 6) // (TWI) Overrun Error -#define AT91C_TWI_UNRE ((unsigned int) 0x1 << 7) // (TWI) Underrun Error -#define AT91C_TWI_NACK ((unsigned int) 0x1 << 8) // (TWI) Not Acknowledged -#define AT91C_TWI_ARBLST ((unsigned int) 0x1 << 9) // (TWI) Arbitration Lost -// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- -// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- -// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Multimedia Card Interface -// ***************************************************************************** -typedef struct _AT91S_MCI { - AT91_REG MCI_CR; // MCI Control Register - AT91_REG MCI_MR; // MCI Mode Register - AT91_REG MCI_DTOR; // MCI Data Timeout Register - AT91_REG MCI_SDCR; // MCI SD Card Register - AT91_REG MCI_ARGR; // MCI Argument Register - AT91_REG MCI_CMDR; // MCI Command Register - AT91_REG Reserved0[2]; // - AT91_REG MCI_RSPR[4]; // MCI Response Register - AT91_REG MCI_RDR; // MCI Receive Data Register - AT91_REG MCI_TDR; // MCI Transmit Data Register - AT91_REG Reserved1[2]; // - AT91_REG MCI_SR; // MCI Status Register - AT91_REG MCI_IER; // MCI Interrupt Enable Register - AT91_REG MCI_IDR; // MCI Interrupt Disable Register - AT91_REG MCI_IMR; // MCI Interrupt Mask Register - AT91_REG Reserved2[44]; // - AT91_REG MCI_RPR; // Receive Pointer Register - AT91_REG MCI_RCR; // Receive Counter Register - AT91_REG MCI_TPR; // Transmit Pointer Register - AT91_REG MCI_TCR; // Transmit Counter Register - AT91_REG MCI_RNPR; // Receive Next Pointer Register - AT91_REG MCI_RNCR; // Receive Next Counter Register - AT91_REG MCI_TNPR; // Transmit Next Pointer Register - AT91_REG MCI_TNCR; // Transmit Next Counter Register - AT91_REG MCI_PTCR; // PDC Transfer Control Register - AT91_REG MCI_PTSR; // PDC Transfer Status Register -} AT91S_MCI, *AT91PS_MCI; - -// -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- -#define AT91C_MCI_MCIEN ((unsigned int) 0x1 << 0) // (MCI) Multimedia Interface Enable -#define AT91C_MCI_MCIDIS ((unsigned int) 0x1 << 1) // (MCI) Multimedia Interface Disable -#define AT91C_MCI_PWSEN ((unsigned int) 0x1 << 2) // (MCI) Power Save Mode Enable -#define AT91C_MCI_PWSDIS ((unsigned int) 0x1 << 3) // (MCI) Power Save Mode Disable -// -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- -#define AT91C_MCI_CLKDIV ((unsigned int) 0x1 << 0) // (MCI) Clock Divider -#define AT91C_MCI_PWSDIV ((unsigned int) 0x1 << 8) // (MCI) Power Saving Divider -#define AT91C_MCI_PDCPADV ((unsigned int) 0x1 << 14) // (MCI) PDC Padding Value -#define AT91C_MCI_PDCMODE ((unsigned int) 0x1 << 15) // (MCI) PDC Oriented Mode -#define AT91C_MCI_BLKLEN ((unsigned int) 0x1 << 18) // (MCI) Data Block Length -// -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- -#define AT91C_MCI_DTOCYC ((unsigned int) 0x1 << 0) // (MCI) Data Timeout Cycle Number -#define AT91C_MCI_DTOMUL ((unsigned int) 0x7 << 4) // (MCI) Data Timeout Multiplier -#define AT91C_MCI_DTOMUL_1 ((unsigned int) 0x0 << 4) // (MCI) DTOCYC x 1 -#define AT91C_MCI_DTOMUL_16 ((unsigned int) 0x1 << 4) // (MCI) DTOCYC x 16 -#define AT91C_MCI_DTOMUL_128 ((unsigned int) 0x2 << 4) // (MCI) DTOCYC x 128 -#define AT91C_MCI_DTOMUL_256 ((unsigned int) 0x3 << 4) // (MCI) DTOCYC x 256 -#define AT91C_MCI_DTOMUL_1024 ((unsigned int) 0x4 << 4) // (MCI) DTOCYC x 1024 -#define AT91C_MCI_DTOMUL_4096 ((unsigned int) 0x5 << 4) // (MCI) DTOCYC x 4096 -#define AT91C_MCI_DTOMUL_65536 ((unsigned int) 0x6 << 4) // (MCI) DTOCYC x 65536 -#define AT91C_MCI_DTOMUL_1048576 ((unsigned int) 0x7 << 4) // (MCI) DTOCYC x 1048576 -// -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- -#define AT91C_MCI_SCDSEL ((unsigned int) 0x1 << 0) // (MCI) SD Card Selector -#define AT91C_MCI_SCDBUS ((unsigned int) 0x1 << 7) // (MCI) SD Card Bus Width -// -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- -#define AT91C_MCI_CMDNB ((unsigned int) 0x1F << 0) // (MCI) Command Number -#define AT91C_MCI_RSPTYP ((unsigned int) 0x3 << 6) // (MCI) Response Type -#define AT91C_MCI_RSPTYP_NO ((unsigned int) 0x0 << 6) // (MCI) No response -#define AT91C_MCI_RSPTYP_48 ((unsigned int) 0x1 << 6) // (MCI) 48-bit response -#define AT91C_MCI_RSPTYP_136 ((unsigned int) 0x2 << 6) // (MCI) 136-bit response -#define AT91C_MCI_SPCMD ((unsigned int) 0x7 << 8) // (MCI) Special CMD -#define AT91C_MCI_SPCMD_NONE ((unsigned int) 0x0 << 8) // (MCI) Not a special CMD -#define AT91C_MCI_SPCMD_INIT ((unsigned int) 0x1 << 8) // (MCI) Initialization CMD -#define AT91C_MCI_SPCMD_SYNC ((unsigned int) 0x2 << 8) // (MCI) Synchronized CMD -#define AT91C_MCI_SPCMD_IT_CMD ((unsigned int) 0x4 << 8) // (MCI) Interrupt command -#define AT91C_MCI_SPCMD_IT_REP ((unsigned int) 0x5 << 8) // (MCI) Interrupt response -#define AT91C_MCI_OPDCMD ((unsigned int) 0x1 << 11) // (MCI) Open Drain Command -#define AT91C_MCI_MAXLAT ((unsigned int) 0x1 << 12) // (MCI) Maximum Latency for Command to respond -#define AT91C_MCI_TRCMD ((unsigned int) 0x3 << 16) // (MCI) Transfer CMD -#define AT91C_MCI_TRCMD_NO ((unsigned int) 0x0 << 16) // (MCI) No transfer -#define AT91C_MCI_TRCMD_START ((unsigned int) 0x1 << 16) // (MCI) Start transfer -#define AT91C_MCI_TRCMD_STOP ((unsigned int) 0x2 << 16) // (MCI) Stop transfer -#define AT91C_MCI_TRDIR ((unsigned int) 0x1 << 18) // (MCI) Transfer Direction -#define AT91C_MCI_TRTYP ((unsigned int) 0x3 << 19) // (MCI) Transfer Type -#define AT91C_MCI_TRTYP_BLOCK ((unsigned int) 0x0 << 19) // (MCI) Block Transfer type -#define AT91C_MCI_TRTYP_MULTIPLE ((unsigned int) 0x1 << 19) // (MCI) Multiple Block transfer type -#define AT91C_MCI_TRTYP_STREAM ((unsigned int) 0x2 << 19) // (MCI) Stream transfer type -// -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- -#define AT91C_MCI_CMDRDY ((unsigned int) 0x1 << 0) // (MCI) Command Ready flag -#define AT91C_MCI_RXRDY ((unsigned int) 0x1 << 1) // (MCI) RX Ready flag -#define AT91C_MCI_TXRDY ((unsigned int) 0x1 << 2) // (MCI) TX Ready flag -#define AT91C_MCI_BLKE ((unsigned int) 0x1 << 3) // (MCI) Data Block Transfer Ended flag -#define AT91C_MCI_DTIP ((unsigned int) 0x1 << 4) // (MCI) Data Transfer in Progress flag -#define AT91C_MCI_NOTBUSY ((unsigned int) 0x1 << 5) // (MCI) Data Line Not Busy flag -#define AT91C_MCI_ENDRX ((unsigned int) 0x1 << 6) // (MCI) End of RX Buffer flag -#define AT91C_MCI_ENDTX ((unsigned int) 0x1 << 7) // (MCI) End of TX Buffer flag -#define AT91C_MCI_RXBUFF ((unsigned int) 0x1 << 14) // (MCI) RX Buffer Full flag -#define AT91C_MCI_TXBUFE ((unsigned int) 0x1 << 15) // (MCI) TX Buffer Empty flag -#define AT91C_MCI_RINDE ((unsigned int) 0x1 << 16) // (MCI) Response Index Error flag -#define AT91C_MCI_RDIRE ((unsigned int) 0x1 << 17) // (MCI) Response Direction Error flag -#define AT91C_MCI_RCRCE ((unsigned int) 0x1 << 18) // (MCI) Response CRC Error flag -#define AT91C_MCI_RENDE ((unsigned int) 0x1 << 19) // (MCI) Response End Bit Error flag -#define AT91C_MCI_RTOE ((unsigned int) 0x1 << 20) // (MCI) Response Time-out Error flag -#define AT91C_MCI_DCRCE ((unsigned int) 0x1 << 21) // (MCI) data CRC Error flag -#define AT91C_MCI_DTOE ((unsigned int) 0x1 << 22) // (MCI) Data timeout Error flag -#define AT91C_MCI_OVRE ((unsigned int) 0x1 << 30) // (MCI) Overrun flag -#define AT91C_MCI_UNRE ((unsigned int) 0x1 << 31) // (MCI) Underrun flag -// -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- -// -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- -// -------- MCI_IMR : (MCI Offset: 0x4c) MCI Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR USB Device Interface -// ***************************************************************************** -typedef struct _AT91S_UDP { - AT91_REG UDP_NUM; // Frame Number Register - AT91_REG UDP_GLBSTATE; // Global State Register - AT91_REG UDP_FADDR; // Function Address Register - AT91_REG Reserved0[1]; // - AT91_REG UDP_IER; // Interrupt Enable Register - AT91_REG UDP_IDR; // Interrupt Disable Register - AT91_REG UDP_IMR; // Interrupt Mask Register - AT91_REG UDP_ISR; // Interrupt Status Register - AT91_REG UDP_ICR; // Interrupt Clear Register - AT91_REG Reserved1[1]; // - AT91_REG UDP_RSTEP; // Reset Endpoint Register - AT91_REG Reserved2[1]; // - AT91_REG UDP_CSR[8]; // Endpoint Control and Status Register - AT91_REG UDP_FDR[8]; // Endpoint FIFO Data Register -} AT91S_UDP, *AT91PS_UDP; - -// -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- -#define AT91C_UDP_FRM_NUM ((unsigned int) 0x7FF << 0) // (UDP) Frame Number as Defined in the Packet Field Formats -#define AT91C_UDP_FRM_ERR ((unsigned int) 0x1 << 16) // (UDP) Frame Error -#define AT91C_UDP_FRM_OK ((unsigned int) 0x1 << 17) // (UDP) Frame OK -// -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- -#define AT91C_UDP_FADDEN ((unsigned int) 0x1 << 0) // (UDP) Function Address Enable -#define AT91C_UDP_CONFG ((unsigned int) 0x1 << 1) // (UDP) Configured -#define AT91C_UDP_RMWUPE ((unsigned int) 0x1 << 2) // (UDP) Remote Wake Up Enable -#define AT91C_UDP_RSMINPR ((unsigned int) 0x1 << 3) // (UDP) A Resume Has Been Sent to the Host -// -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- -#define AT91C_UDP_FADD ((unsigned int) 0xFF << 0) // (UDP) Function Address Value -#define AT91C_UDP_FEN ((unsigned int) 0x1 << 8) // (UDP) Function Enable -// -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- -#define AT91C_UDP_EPINT0 ((unsigned int) 0x1 << 0) // (UDP) Endpoint 0 Interrupt -#define AT91C_UDP_EPINT1 ((unsigned int) 0x1 << 1) // (UDP) Endpoint 0 Interrupt -#define AT91C_UDP_EPINT2 ((unsigned int) 0x1 << 2) // (UDP) Endpoint 2 Interrupt -#define AT91C_UDP_EPINT3 ((unsigned int) 0x1 << 3) // (UDP) Endpoint 3 Interrupt -#define AT91C_UDP_EPINT4 ((unsigned int) 0x1 << 4) // (UDP) Endpoint 4 Interrupt -#define AT91C_UDP_EPINT5 ((unsigned int) 0x1 << 5) // (UDP) Endpoint 5 Interrupt -#define AT91C_UDP_EPINT6 ((unsigned int) 0x1 << 6) // (UDP) Endpoint 6 Interrupt -#define AT91C_UDP_EPINT7 ((unsigned int) 0x1 << 7) // (UDP) Endpoint 7 Interrupt -#define AT91C_UDP_RXSUSP ((unsigned int) 0x1 << 8) // (UDP) USB Suspend Interrupt -#define AT91C_UDP_RXRSM ((unsigned int) 0x1 << 9) // (UDP) USB Resume Interrupt -#define AT91C_UDP_EXTRSM ((unsigned int) 0x1 << 10) // (UDP) USB External Resume Interrupt -#define AT91C_UDP_SOFINT ((unsigned int) 0x1 << 11) // (UDP) USB Start Of frame Interrupt -#define AT91C_UDP_WAKEUP ((unsigned int) 0x1 << 13) // (UDP) USB Resume Interrupt -// -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- -// -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- -// -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- -#define AT91C_UDP_ENDBUSRES ((unsigned int) 0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt -// -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- -// -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- -#define AT91C_UDP_EP0 ((unsigned int) 0x1 << 0) // (UDP) Reset Endpoint 0 -#define AT91C_UDP_EP1 ((unsigned int) 0x1 << 1) // (UDP) Reset Endpoint 1 -#define AT91C_UDP_EP2 ((unsigned int) 0x1 << 2) // (UDP) Reset Endpoint 2 -#define AT91C_UDP_EP3 ((unsigned int) 0x1 << 3) // (UDP) Reset Endpoint 3 -#define AT91C_UDP_EP4 ((unsigned int) 0x1 << 4) // (UDP) Reset Endpoint 4 -#define AT91C_UDP_EP5 ((unsigned int) 0x1 << 5) // (UDP) Reset Endpoint 5 -#define AT91C_UDP_EP6 ((unsigned int) 0x1 << 6) // (UDP) Reset Endpoint 6 -#define AT91C_UDP_EP7 ((unsigned int) 0x1 << 7) // (UDP) Reset Endpoint 7 -// -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- -#define AT91C_UDP_TXCOMP ((unsigned int) 0x1 << 0) // (UDP) Generates an IN packet with data previously written in the DPR -#define AT91C_UDP_RX_DATA_BK0 ((unsigned int) 0x1 << 1) // (UDP) Receive Data Bank 0 -#define AT91C_UDP_RXSETUP ((unsigned int) 0x1 << 2) // (UDP) Sends STALL to the Host (Control endpoints) -#define AT91C_UDP_ISOERROR ((unsigned int) 0x1 << 3) // (UDP) Isochronous error (Isochronous endpoints) -#define AT91C_UDP_TXPKTRDY ((unsigned int) 0x1 << 4) // (UDP) Transmit Packet Ready -#define AT91C_UDP_FORCESTALL ((unsigned int) 0x1 << 5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints). -#define AT91C_UDP_RX_DATA_BK1 ((unsigned int) 0x1 << 6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes). -#define AT91C_UDP_DIR ((unsigned int) 0x1 << 7) // (UDP) Transfer Direction -#define AT91C_UDP_EPTYPE ((unsigned int) 0x7 << 8) // (UDP) Endpoint type -#define AT91C_UDP_EPTYPE_CTRL ((unsigned int) 0x0 << 8) // (UDP) Control -#define AT91C_UDP_EPTYPE_ISO_OUT ((unsigned int) 0x1 << 8) // (UDP) Isochronous OUT -#define AT91C_UDP_EPTYPE_BULK_OUT ((unsigned int) 0x2 << 8) // (UDP) Bulk OUT -#define AT91C_UDP_EPTYPE_INT_OUT ((unsigned int) 0x3 << 8) // (UDP) Interrupt OUT -#define AT91C_UDP_EPTYPE_ISO_IN ((unsigned int) 0x5 << 8) // (UDP) Isochronous IN -#define AT91C_UDP_EPTYPE_BULK_IN ((unsigned int) 0x6 << 8) // (UDP) Bulk IN -#define AT91C_UDP_EPTYPE_INT_IN ((unsigned int) 0x7 << 8) // (UDP) Interrupt IN -#define AT91C_UDP_DTGLE ((unsigned int) 0x1 << 11) // (UDP) Data Toggle -#define AT91C_UDP_EPEDS ((unsigned int) 0x1 << 15) // (UDP) Endpoint Enable Disable -#define AT91C_UDP_RXBYTECNT ((unsigned int) 0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Timer Counter Channel Interface -// ***************************************************************************** -typedef struct _AT91S_TC { - AT91_REG TC_CCR; // Channel Control Register - AT91_REG TC_CMR; // Channel Mode Register - AT91_REG Reserved0[2]; // - AT91_REG TC_CV; // Counter Value - AT91_REG TC_RA; // Register A - AT91_REG TC_RB; // Register B - AT91_REG TC_RC; // Register C - AT91_REG TC_SR; // Status Register - AT91_REG TC_IER; // Interrupt Enable Register - AT91_REG TC_IDR; // Interrupt Disable Register - AT91_REG TC_IMR; // Interrupt Mask Register -} AT91S_TC, *AT91PS_TC; - -// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- -#define AT91C_TC_CLKEN ((unsigned int) 0x1 << 0) // (TC) Counter Clock Enable Command -#define AT91C_TC_CLKDIS ((unsigned int) 0x1 << 1) // (TC) Counter Clock Disable Command -#define AT91C_TC_SWTRG ((unsigned int) 0x1 << 2) // (TC) Software Trigger Command -// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- -#define AT91C_TC_CPCSTOP ((unsigned int) 0x1 << 6) // (TC) Counter Clock Stopped with RC Compare -#define AT91C_TC_CPCDIS ((unsigned int) 0x1 << 7) // (TC) Counter Clock Disable with RC Compare -#define AT91C_TC_EEVTEDG ((unsigned int) 0x3 << 8) // (TC) External Event Edge Selection -#define AT91C_TC_EEVTEDG_NONE ((unsigned int) 0x0 << 8) // (TC) Edge: None -#define AT91C_TC_EEVTEDG_RISING ((unsigned int) 0x1 << 8) // (TC) Edge: rising edge -#define AT91C_TC_EEVTEDG_FALLING ((unsigned int) 0x2 << 8) // (TC) Edge: falling edge -#define AT91C_TC_EEVTEDG_BOTH ((unsigned int) 0x3 << 8) // (TC) Edge: each edge -#define AT91C_TC_EEVT ((unsigned int) 0x3 << 10) // (TC) External Event Selection -#define AT91C_TC_EEVT_NONE ((unsigned int) 0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input -#define AT91C_TC_EEVT_RISING ((unsigned int) 0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output -#define AT91C_TC_EEVT_FALLING ((unsigned int) 0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output -#define AT91C_TC_EEVT_BOTH ((unsigned int) 0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output -#define AT91C_TC_ENETRG ((unsigned int) 0x1 << 12) // (TC) External Event Trigger enable -#define AT91C_TC_WAVESEL ((unsigned int) 0x3 << 13) // (TC) Waveform Selection -#define AT91C_TC_WAVESEL_UP ((unsigned int) 0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare -#define AT91C_TC_WAVESEL_UPDOWN ((unsigned int) 0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare -#define AT91C_TC_WAVESEL_UP_AUTO ((unsigned int) 0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare -#define AT91C_TC_WAVESEL_UPDOWN_AUTO ((unsigned int) 0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare -#define AT91C_TC_CPCTRG ((unsigned int) 0x1 << 14) // (TC) RC Compare Trigger Enable -#define AT91C_TC_WAVE ((unsigned int) 0x1 << 15) // (TC) -#define AT91C_TC_ACPA ((unsigned int) 0x3 << 16) // (TC) RA Compare Effect on TIOA -#define AT91C_TC_ACPA_NONE ((unsigned int) 0x0 << 16) // (TC) Effect: none -#define AT91C_TC_ACPA_SET ((unsigned int) 0x1 << 16) // (TC) Effect: set -#define AT91C_TC_ACPA_CLEAR ((unsigned int) 0x2 << 16) // (TC) Effect: clear -#define AT91C_TC_ACPA_TOGGLE ((unsigned int) 0x3 << 16) // (TC) Effect: toggle -#define AT91C_TC_ACPC ((unsigned int) 0x3 << 18) // (TC) RC Compare Effect on TIOA -#define AT91C_TC_ACPC_NONE ((unsigned int) 0x0 << 18) // (TC) Effect: none -#define AT91C_TC_ACPC_SET ((unsigned int) 0x1 << 18) // (TC) Effect: set -#define AT91C_TC_ACPC_CLEAR ((unsigned int) 0x2 << 18) // (TC) Effect: clear -#define AT91C_TC_ACPC_TOGGLE ((unsigned int) 0x3 << 18) // (TC) Effect: toggle -#define AT91C_TC_AEEVT ((unsigned int) 0x3 << 20) // (TC) External Event Effect on TIOA -#define AT91C_TC_AEEVT_NONE ((unsigned int) 0x0 << 20) // (TC) Effect: none -#define AT91C_TC_AEEVT_SET ((unsigned int) 0x1 << 20) // (TC) Effect: set -#define AT91C_TC_AEEVT_CLEAR ((unsigned int) 0x2 << 20) // (TC) Effect: clear -#define AT91C_TC_AEEVT_TOGGLE ((unsigned int) 0x3 << 20) // (TC) Effect: toggle -#define AT91C_TC_ASWTRG ((unsigned int) 0x3 << 22) // (TC) Software Trigger Effect on TIOA -#define AT91C_TC_ASWTRG_NONE ((unsigned int) 0x0 << 22) // (TC) Effect: none -#define AT91C_TC_ASWTRG_SET ((unsigned int) 0x1 << 22) // (TC) Effect: set -#define AT91C_TC_ASWTRG_CLEAR ((unsigned int) 0x2 << 22) // (TC) Effect: clear -#define AT91C_TC_ASWTRG_TOGGLE ((unsigned int) 0x3 << 22) // (TC) Effect: toggle -#define AT91C_TC_BCPB ((unsigned int) 0x3 << 24) // (TC) RB Compare Effect on TIOB -#define AT91C_TC_BCPB_NONE ((unsigned int) 0x0 << 24) // (TC) Effect: none -#define AT91C_TC_BCPB_SET ((unsigned int) 0x1 << 24) // (TC) Effect: set -#define AT91C_TC_BCPB_CLEAR ((unsigned int) 0x2 << 24) // (TC) Effect: clear -#define AT91C_TC_BCPB_TOGGLE ((unsigned int) 0x3 << 24) // (TC) Effect: toggle -#define AT91C_TC_BCPC ((unsigned int) 0x3 << 26) // (TC) RC Compare Effect on TIOB -#define AT91C_TC_BCPC_NONE ((unsigned int) 0x0 << 26) // (TC) Effect: none -#define AT91C_TC_BCPC_SET ((unsigned int) 0x1 << 26) // (TC) Effect: set -#define AT91C_TC_BCPC_CLEAR ((unsigned int) 0x2 << 26) // (TC) Effect: clear -#define AT91C_TC_BCPC_TOGGLE ((unsigned int) 0x3 << 26) // (TC) Effect: toggle -#define AT91C_TC_BEEVT ((unsigned int) 0x3 << 28) // (TC) External Event Effect on TIOB -#define AT91C_TC_BEEVT_NONE ((unsigned int) 0x0 << 28) // (TC) Effect: none -#define AT91C_TC_BEEVT_SET ((unsigned int) 0x1 << 28) // (TC) Effect: set -#define AT91C_TC_BEEVT_CLEAR ((unsigned int) 0x2 << 28) // (TC) Effect: clear -#define AT91C_TC_BEEVT_TOGGLE ((unsigned int) 0x3 << 28) // (TC) Effect: toggle -#define AT91C_TC_BSWTRG ((unsigned int) 0x3 << 30) // (TC) Software Trigger Effect on TIOB -#define AT91C_TC_BSWTRG_NONE ((unsigned int) 0x0 << 30) // (TC) Effect: none -#define AT91C_TC_BSWTRG_SET ((unsigned int) 0x1 << 30) // (TC) Effect: set -#define AT91C_TC_BSWTRG_CLEAR ((unsigned int) 0x2 << 30) // (TC) Effect: clear -#define AT91C_TC_BSWTRG_TOGGLE ((unsigned int) 0x3 << 30) // (TC) Effect: toggle -// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- -#define AT91C_TC_COVFS ((unsigned int) 0x1 << 0) // (TC) Counter Overflow -#define AT91C_TC_LOVRS ((unsigned int) 0x1 << 1) // (TC) Load Overrun -#define AT91C_TC_CPAS ((unsigned int) 0x1 << 2) // (TC) RA Compare -#define AT91C_TC_CPBS ((unsigned int) 0x1 << 3) // (TC) RB Compare -#define AT91C_TC_CPCS ((unsigned int) 0x1 << 4) // (TC) RC Compare -#define AT91C_TC_LDRAS ((unsigned int) 0x1 << 5) // (TC) RA Loading -#define AT91C_TC_LDRBS ((unsigned int) 0x1 << 6) // (TC) RB Loading -#define AT91C_TC_ETRCS ((unsigned int) 0x1 << 7) // (TC) External Trigger -#define AT91C_TC_ETRGS ((unsigned int) 0x1 << 16) // (TC) Clock Enabling -#define AT91C_TC_MTIOA ((unsigned int) 0x1 << 17) // (TC) TIOA Mirror -#define AT91C_TC_MTIOB ((unsigned int) 0x1 << 18) // (TC) TIOA Mirror -// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- -// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- -// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Timer Counter Interface -// ***************************************************************************** -typedef struct _AT91S_TCB { - AT91S_TC TCB_TC0; // TC Channel 0 - AT91_REG Reserved0[4]; // - AT91S_TC TCB_TC1; // TC Channel 1 - AT91_REG Reserved1[4]; // - AT91S_TC TCB_TC2; // TC Channel 2 - AT91_REG Reserved2[4]; // - AT91_REG TCB_BCR; // TC Block Control Register - AT91_REG TCB_BMR; // TC Block Mode Register -} AT91S_TCB, *AT91PS_TCB; - -// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- -#define AT91C_TCB_SYNC ((unsigned int) 0x1 << 0) // (TCB) Synchro Command -// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- -#define AT91C_TCB_TC0XC0S ((unsigned int) 0x1 << 0) // (TCB) External Clock Signal 0 Selection -#define AT91C_TCB_TC0XC0S_TCLK0 ((unsigned int) 0x0) // (TCB) TCLK0 connected to XC0 -#define AT91C_TCB_TC0XC0S_NONE ((unsigned int) 0x1) // (TCB) None signal connected to XC0 -#define AT91C_TCB_TC0XC0S_TIOA1 ((unsigned int) 0x2) // (TCB) TIOA1 connected to XC0 -#define AT91C_TCB_TC0XC0S_TIOA2 ((unsigned int) 0x3) // (TCB) TIOA2 connected to XC0 -#define AT91C_TCB_TC1XC1S ((unsigned int) 0x1 << 2) // (TCB) External Clock Signal 1 Selection -#define AT91C_TCB_TC1XC1S_TCLK1 ((unsigned int) 0x0 << 2) // (TCB) TCLK1 connected to XC1 -#define AT91C_TCB_TC1XC1S_NONE ((unsigned int) 0x1 << 2) // (TCB) None signal connected to XC1 -#define AT91C_TCB_TC1XC1S_TIOA0 ((unsigned int) 0x2 << 2) // (TCB) TIOA0 connected to XC1 -#define AT91C_TCB_TC1XC1S_TIOA2 ((unsigned int) 0x3 << 2) // (TCB) TIOA2 connected to XC1 -#define AT91C_TCB_TC2XC2S ((unsigned int) 0x1 << 4) // (TCB) External Clock Signal 2 Selection -#define AT91C_TCB_TC2XC2S_TCLK2 ((unsigned int) 0x0 << 4) // (TCB) TCLK2 connected to XC2 -#define AT91C_TCB_TC2XC2S_NONE ((unsigned int) 0x1 << 4) // (TCB) None signal connected to XC2 -#define AT91C_TCB_TC2XC2S_TIOA0 ((unsigned int) 0x2 << 4) // (TCB) TIOA0 connected to XC2 -#define AT91C_TCB_TC2XC2S_TIOA2 ((unsigned int) 0x3 << 4) // (TCB) TIOA2 connected to XC2 - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR USB Host Interface -// ***************************************************************************** -typedef struct _AT91S_UHP { - AT91_REG UHP_HcRevision; // Revision - AT91_REG UHP_HcControl; // Operating modes for the Host Controller - AT91_REG UHP_HcCommandStatus; // Command & status Register - AT91_REG UHP_HcInterruptStatus; // Interrupt Status Register - AT91_REG UHP_HcInterruptEnable; // Interrupt Enable Register - AT91_REG UHP_HcInterruptDisable; // Interrupt Disable Register - AT91_REG UHP_HcHCCA; // Pointer to the Host Controller Communication Area - AT91_REG UHP_HcPeriodCurrentED; // Current Isochronous or Interrupt Endpoint Descriptor - AT91_REG UHP_HcControlHeadED; // First Endpoint Descriptor of the Control list - AT91_REG UHP_HcControlCurrentED; // Endpoint Control and Status Register - AT91_REG UHP_HcBulkHeadED; // First endpoint register of the Bulk list - AT91_REG UHP_HcBulkCurrentED; // Current endpoint of the Bulk list - AT91_REG UHP_HcBulkDoneHead; // Last completed transfer descriptor - AT91_REG UHP_HcFmInterval; // Bit time between 2 consecutive SOFs - AT91_REG UHP_HcFmRemaining; // Bit time remaining in the current Frame - AT91_REG UHP_HcFmNumber; // Frame number - AT91_REG UHP_HcPeriodicStart; // Periodic Start - AT91_REG UHP_HcLSThreshold; // LS Threshold - AT91_REG UHP_HcRhDescriptorA; // Root Hub characteristics A - AT91_REG UHP_HcRhDescriptorB; // Root Hub characteristics B - AT91_REG UHP_HcRhStatus; // Root Hub Status register - AT91_REG UHP_HcRhPortStatus[2]; // Root Hub Port Status Register -} AT91S_UHP, *AT91PS_UHP; - - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Ethernet MAC -// ***************************************************************************** -typedef struct _AT91S_EMAC { - AT91_REG EMAC_CTL; // Network Control Register - AT91_REG EMAC_CFG; // Network Configuration Register - AT91_REG EMAC_SR; // Network Status Register - AT91_REG EMAC_TAR; // Transmit Address Register - AT91_REG EMAC_TCR; // Transmit Control Register - AT91_REG EMAC_TSR; // Transmit Status Register - AT91_REG EMAC_RBQP; // Receive Buffer Queue Pointer - AT91_REG Reserved0[1]; // - AT91_REG EMAC_RSR; // Receive Status Register - AT91_REG EMAC_ISR; // Interrupt Status Register - AT91_REG EMAC_IER; // Interrupt Enable Register - AT91_REG EMAC_IDR; // Interrupt Disable Register - AT91_REG EMAC_IMR; // Interrupt Mask Register - AT91_REG EMAC_MAN; // PHY Maintenance Register - AT91_REG Reserved1[2]; // - AT91_REG EMAC_FRA; // Frames Transmitted OK Register - AT91_REG EMAC_SCOL; // Single Collision Frame Register - AT91_REG EMAC_MCOL; // Multiple Collision Frame Register - AT91_REG EMAC_OK; // Frames Received OK Register - AT91_REG EMAC_SEQE; // Frame Check Sequence Error Register - AT91_REG EMAC_ALE; // Alignment Error Register - AT91_REG EMAC_DTE; // Deferred Transmission Frame Register - AT91_REG EMAC_LCOL; // Late Collision Register - AT91_REG EMAC_ECOL; // Excessive Collision Register - AT91_REG EMAC_CSE; // Carrier Sense Error Register - AT91_REG EMAC_TUE; // Transmit Underrun Error Register - AT91_REG EMAC_CDE; // Code Error Register - AT91_REG EMAC_ELR; // Excessive Length Error Register - AT91_REG EMAC_RJB; // Receive Jabber Register - AT91_REG EMAC_USF; // Undersize Frame Register - AT91_REG EMAC_SQEE; // SQE Test Error Register - AT91_REG EMAC_DRFC; // Discarded RX Frame Register - AT91_REG Reserved2[3]; // - AT91_REG EMAC_HSH; // Hash Address High[63:32] - AT91_REG EMAC_HSL; // Hash Address Low[31:0] - AT91_REG EMAC_SA1L; // Specific Address 1 Low, First 4 bytes - AT91_REG EMAC_SA1H; // Specific Address 1 High, Last 2 bytes - AT91_REG EMAC_SA2L; // Specific Address 2 Low, First 4 bytes - AT91_REG EMAC_SA2H; // Specific Address 2 High, Last 2 bytes - AT91_REG EMAC_SA3L; // Specific Address 3 Low, First 4 bytes - AT91_REG EMAC_SA3H; // Specific Address 3 High, Last 2 bytes - AT91_REG EMAC_SA4L; // Specific Address 4 Low, First 4 bytes - AT91_REG EMAC_SA4H; // Specific Address 4 High, Last 2 bytesr -} AT91S_EMAC, *AT91PS_EMAC; - -// -------- EMAC_CTL : (EMAC Offset: 0x0) -------- -#define AT91C_EMAC_LB ((unsigned int) 0x1 << 0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level. -#define AT91C_EMAC_LBL ((unsigned int) 0x1 << 1) // (EMAC) Loopback local. -#define AT91C_EMAC_RE ((unsigned int) 0x1 << 2) // (EMAC) Receive enable. -#define AT91C_EMAC_TE ((unsigned int) 0x1 << 3) // (EMAC) Transmit enable. -#define AT91C_EMAC_MPE ((unsigned int) 0x1 << 4) // (EMAC) Management port enable. -#define AT91C_EMAC_CSR ((unsigned int) 0x1 << 5) // (EMAC) Clear statistics registers. -#define AT91C_EMAC_ISR ((unsigned int) 0x1 << 6) // (EMAC) Increment statistics registers. -#define AT91C_EMAC_WES ((unsigned int) 0x1 << 7) // (EMAC) Write enable for statistics registers. -#define AT91C_EMAC_BP ((unsigned int) 0x1 << 8) // (EMAC) Back pressure. -// -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- -#define AT91C_EMAC_SPD ((unsigned int) 0x1 << 0) // (EMAC) Speed. -#define AT91C_EMAC_FD ((unsigned int) 0x1 << 1) // (EMAC) Full duplex. -#define AT91C_EMAC_BR ((unsigned int) 0x1 << 2) // (EMAC) Bit rate. -#define AT91C_EMAC_CAF ((unsigned int) 0x1 << 4) // (EMAC) Copy all frames. -#define AT91C_EMAC_NBC ((unsigned int) 0x1 << 5) // (EMAC) No broadcast. -#define AT91C_EMAC_MTI ((unsigned int) 0x1 << 6) // (EMAC) Multicast hash enable -#define AT91C_EMAC_UNI ((unsigned int) 0x1 << 7) // (EMAC) Unicast hash enable. -#define AT91C_EMAC_BIG ((unsigned int) 0x1 << 8) // (EMAC) Receive 1522 bytes. -#define AT91C_EMAC_EAE ((unsigned int) 0x1 << 9) // (EMAC) External address match enable. -#define AT91C_EMAC_CLK ((unsigned int) 0x3 << 10) // (EMAC) -#define AT91C_EMAC_CLK_HCLK_8 ((unsigned int) 0x0 << 10) // (EMAC) HCLK divided by 8 -#define AT91C_EMAC_CLK_HCLK_16 ((unsigned int) 0x1 << 10) // (EMAC) HCLK divided by 16 -#define AT91C_EMAC_CLK_HCLK_32 ((unsigned int) 0x2 << 10) // (EMAC) HCLK divided by 32 -#define AT91C_EMAC_CLK_HCLK_64 ((unsigned int) 0x3 << 10) // (EMAC) HCLK divided by 64 -#define AT91C_EMAC_RTY ((unsigned int) 0x1 << 12) // (EMAC) -#define AT91C_EMAC_RMII ((unsigned int) 0x1 << 13) // (EMAC) -// -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- -#define AT91C_EMAC_MDIO ((unsigned int) 0x1 << 1) // (EMAC) -#define AT91C_EMAC_IDLE ((unsigned int) 0x1 << 2) // (EMAC) -// -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- -#define AT91C_EMAC_LEN ((unsigned int) 0x7FF << 0) // (EMAC) -#define AT91C_EMAC_NCRC ((unsigned int) 0x1 << 15) // (EMAC) -// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- -#define AT91C_EMAC_OVR ((unsigned int) 0x1 << 0) // (EMAC) -#define AT91C_EMAC_COL ((unsigned int) 0x1 << 1) // (EMAC) -#define AT91C_EMAC_RLE ((unsigned int) 0x1 << 2) // (EMAC) -#define AT91C_EMAC_TXIDLE ((unsigned int) 0x1 << 3) // (EMAC) -#define AT91C_EMAC_BNQ ((unsigned int) 0x1 << 4) // (EMAC) -#define AT91C_EMAC_COMP ((unsigned int) 0x1 << 5) // (EMAC) -#define AT91C_EMAC_UND ((unsigned int) 0x1 << 6) // (EMAC) -// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- -#define AT91C_EMAC_BNA ((unsigned int) 0x1 << 0) // (EMAC) -#define AT91C_EMAC_REC ((unsigned int) 0x1 << 1) // (EMAC) -// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- -#define AT91C_EMAC_DONE ((unsigned int) 0x1 << 0) // (EMAC) -#define AT91C_EMAC_RCOM ((unsigned int) 0x1 << 1) // (EMAC) -#define AT91C_EMAC_RBNA ((unsigned int) 0x1 << 2) // (EMAC) -#define AT91C_EMAC_TOVR ((unsigned int) 0x1 << 3) // (EMAC) -#define AT91C_EMAC_TUND ((unsigned int) 0x1 << 4) // (EMAC) -#define AT91C_EMAC_RTRY ((unsigned int) 0x1 << 5) // (EMAC) -#define AT91C_EMAC_TBRE ((unsigned int) 0x1 << 6) // (EMAC) -#define AT91C_EMAC_TCOM ((unsigned int) 0x1 << 7) // (EMAC) -#define AT91C_EMAC_TIDLE ((unsigned int) 0x1 << 8) // (EMAC) -#define AT91C_EMAC_LINK ((unsigned int) 0x1 << 9) // (EMAC) -#define AT91C_EMAC_ROVR ((unsigned int) 0x1 << 10) // (EMAC) -#define AT91C_EMAC_HRESP ((unsigned int) 0x1 << 11) // (EMAC) -// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- -// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- -// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- -// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- -#define AT91C_EMAC_DATA ((unsigned int) 0xFFFF << 0) // (EMAC) -#define AT91C_EMAC_CODE ((unsigned int) 0x3 << 16) // (EMAC) -#define AT91C_EMAC_REGA ((unsigned int) 0x1F << 18) // (EMAC) -#define AT91C_EMAC_PHYA ((unsigned int) 0x1F << 23) // (EMAC) -#define AT91C_EMAC_RW ((unsigned int) 0x3 << 28) // (EMAC) -#define AT91C_EMAC_HIGH ((unsigned int) 0x1 << 30) // (EMAC) -#define AT91C_EMAC_LOW ((unsigned int) 0x1 << 31) // (EMAC) - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR External Bus Interface -// ***************************************************************************** -typedef struct _AT91S_EBI { - AT91_REG EBI_CSA; // Chip Select Assignment Register - AT91_REG EBI_CFGR; // Configuration Register -} AT91S_EBI, *AT91PS_EBI; - -// -------- EBI_CSA : (EBI Offset: 0x0) Chip Select Assignment Register -------- -#define AT91C_EBI_CS0A ((unsigned int) 0x1 << 0) // (EBI) Chip Select 0 Assignment -#define AT91C_EBI_CS0A_SMC ((unsigned int) 0x0) // (EBI) Chip Select 0 is assigned to the Static Memory Controller. -#define AT91C_EBI_CS0A_BFC ((unsigned int) 0x1) // (EBI) Chip Select 0 is assigned to the Burst Flash Controller. -#define AT91C_EBI_CS1A ((unsigned int) 0x1 << 1) // (EBI) Chip Select 1 Assignment -#define AT91C_EBI_CS1A_SMC ((unsigned int) 0x0 << 1) // (EBI) Chip Select 1 is assigned to the Static Memory Controller. -#define AT91C_EBI_CS1A_SDRAMC ((unsigned int) 0x1 << 1) // (EBI) Chip Select 1 is assigned to the SDRAM Controller. -#define AT91C_EBI_CS3A ((unsigned int) 0x1 << 3) // (EBI) Chip Select 3 Assignment -#define AT91C_EBI_CS3A_SMC ((unsigned int) 0x0 << 3) // (EBI) Chip Select 3 is only assigned to the Static Memory Controller and NCS3 behaves as defined by the SMC2. -#define AT91C_EBI_CS3A_SMC_SmartMedia ((unsigned int) 0x1 << 3) // (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated. -#define AT91C_EBI_CS4A ((unsigned int) 0x1 << 4) // (EBI) Chip Select 4 Assignment -#define AT91C_EBI_CS4A_SMC ((unsigned int) 0x0 << 4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and NCS4,NCS5 and NCS6 behave as defined by the SMC2. -#define AT91C_EBI_CS4A_SMC_CompactFlash ((unsigned int) 0x1 << 4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and the CompactFlash Logic is activated. -// -------- EBI_CFGR : (EBI Offset: 0x4) Configuration Register -------- -#define AT91C_EBI_DBPUC ((unsigned int) 0x1 << 0) // (EBI) Data Bus Pull-Up Configuration -#define AT91C_EBI_EBSEN ((unsigned int) 0x1 << 1) // (EBI) Bus Sharing Enable - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface -// ***************************************************************************** -typedef struct _AT91S_SMC2 { - AT91_REG SMC2_CSR[8]; // SMC2 Chip Select Register -} AT91S_SMC2, *AT91PS_SMC2; - -// -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- -#define AT91C_SMC2_NWS ((unsigned int) 0x7F << 0) // (SMC2) Number of Wait States -#define AT91C_SMC2_WSEN ((unsigned int) 0x1 << 7) // (SMC2) Wait State Enable -#define AT91C_SMC2_TDF ((unsigned int) 0xF << 8) // (SMC2) Data Float Time -#define AT91C_SMC2_BAT ((unsigned int) 0x1 << 12) // (SMC2) Byte Access Type -#define AT91C_SMC2_DBW ((unsigned int) 0x1 << 13) // (SMC2) Data Bus Width -#define AT91C_SMC2_DBW_16 ((unsigned int) 0x1 << 13) // (SMC2) 16-bit. -#define AT91C_SMC2_DBW_8 ((unsigned int) 0x2 << 13) // (SMC2) 8-bit. -#define AT91C_SMC2_DRP ((unsigned int) 0x1 << 15) // (SMC2) Data Read Protocol -#define AT91C_SMC2_ACSS ((unsigned int) 0x3 << 16) // (SMC2) Address to Chip Select Setup -#define AT91C_SMC2_ACSS_STANDARD ((unsigned int) 0x0 << 16) // (SMC2) Standard, asserted at the beginning of the access and deasserted at the end. -#define AT91C_SMC2_ACSS_1_CYCLE ((unsigned int) 0x1 << 16) // (SMC2) One cycle less at the beginning and the end of the access. -#define AT91C_SMC2_ACSS_2_CYCLES ((unsigned int) 0x2 << 16) // (SMC2) Two cycles less at the beginning and the end of the access. -#define AT91C_SMC2_ACSS_3_CYCLES ((unsigned int) 0x3 << 16) // (SMC2) Three cycles less at the beginning and the end of the access. -#define AT91C_SMC2_RWSETUP ((unsigned int) 0x7 << 24) // (SMC2) Read and Write Signal Setup Time -#define AT91C_SMC2_RWHOLD ((unsigned int) 0x7 << 29) // (SMC2) Read and Write Signal Hold Time - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR SDRAM Controller Interface -// ***************************************************************************** -typedef struct _AT91S_SDRC { - AT91_REG SDRC_MR; // SDRAM Controller Mode Register - AT91_REG SDRC_TR; // SDRAM Controller Refresh Timer Register - AT91_REG SDRC_CR; // SDRAM Controller Configuration Register - AT91_REG SDRC_SRR; // SDRAM Controller Self Refresh Register - AT91_REG SDRC_LPR; // SDRAM Controller Low Power Register - AT91_REG SDRC_IER; // SDRAM Controller Interrupt Enable Register - AT91_REG SDRC_IDR; // SDRAM Controller Interrupt Disable Register - AT91_REG SDRC_IMR; // SDRAM Controller Interrupt Mask Register - AT91_REG SDRC_ISR; // SDRAM Controller Interrupt Mask Register -} AT91S_SDRC, *AT91PS_SDRC; - -// -------- SDRC_MR : (SDRC Offset: 0x0) SDRAM Controller Mode Register -------- -#define AT91C_SDRC_MODE ((unsigned int) 0xF << 0) // (SDRC) Mode -#define AT91C_SDRC_MODE_NORMAL_CMD ((unsigned int) 0x0) // (SDRC) Normal Mode -#define AT91C_SDRC_MODE_NOP_CMD ((unsigned int) 0x1) // (SDRC) NOP Command -#define AT91C_SDRC_MODE_PRCGALL_CMD ((unsigned int) 0x2) // (SDRC) All Banks Precharge Command -#define AT91C_SDRC_MODE_LMR_CMD ((unsigned int) 0x3) // (SDRC) Load Mode Register Command -#define AT91C_SDRC_MODE_RFSH_CMD ((unsigned int) 0x4) // (SDRC) Refresh Command -#define AT91C_SDRC_DBW ((unsigned int) 0x1 << 4) // (SDRC) Data Bus Width -#define AT91C_SDRC_DBW_32_BITS ((unsigned int) 0x0 << 4) // (SDRC) 32 Bits datas bus -#define AT91C_SDRC_DBW_16_BITS ((unsigned int) 0x1 << 4) // (SDRC) 16 Bits datas bus -// -------- SDRC_TR : (SDRC Offset: 0x4) SDRC Refresh Timer Register -------- -#define AT91C_SDRC_COUNT ((unsigned int) 0xFFF << 0) // (SDRC) Refresh Counter -// -------- SDRC_CR : (SDRC Offset: 0x8) SDRAM Configuration Register -------- -#define AT91C_SDRC_NC ((unsigned int) 0x3 << 0) // (SDRC) Number of Column Bits -#define AT91C_SDRC_NC_8 ((unsigned int) 0x0) // (SDRC) 8 Bits -#define AT91C_SDRC_NC_9 ((unsigned int) 0x1) // (SDRC) 9 Bits -#define AT91C_SDRC_NC_10 ((unsigned int) 0x2) // (SDRC) 10 Bits -#define AT91C_SDRC_NC_11 ((unsigned int) 0x3) // (SDRC) 11 Bits -#define AT91C_SDRC_NR ((unsigned int) 0x3 << 2) // (SDRC) Number of Row Bits -#define AT91C_SDRC_NR_11 ((unsigned int) 0x0 << 2) // (SDRC) 11 Bits -#define AT91C_SDRC_NR_12 ((unsigned int) 0x1 << 2) // (SDRC) 12 Bits -#define AT91C_SDRC_NR_13 ((unsigned int) 0x2 << 2) // (SDRC) 13 Bits -#define AT91C_SDRC_NB ((unsigned int) 0x1 << 4) // (SDRC) Number of Banks -#define AT91C_SDRC_NB_2_BANKS ((unsigned int) 0x0 << 4) // (SDRC) 2 banks -#define AT91C_SDRC_NB_4_BANKS ((unsigned int) 0x1 << 4) // (SDRC) 4 banks -#define AT91C_SDRC_CAS ((unsigned int) 0x3 << 5) // (SDRC) CAS Latency -#define AT91C_SDRC_CAS_2 ((unsigned int) 0x2 << 5) // (SDRC) 2 cycles -#define AT91C_SDRC_TWR ((unsigned int) 0xF << 7) // (SDRC) Number of Write Recovery Time Cycles -#define AT91C_SDRC_TRC ((unsigned int) 0xF << 11) // (SDRC) Number of RAS Cycle Time Cycles -#define AT91C_SDRC_TRP ((unsigned int) 0xF << 15) // (SDRC) Number of RAS Precharge Time Cycles -#define AT91C_SDRC_TRCD ((unsigned int) 0xF << 19) // (SDRC) Number of RAS to CAS Delay Cycles -#define AT91C_SDRC_TRAS ((unsigned int) 0xF << 23) // (SDRC) Number of RAS Active Time Cycles -#define AT91C_SDRC_TXSR ((unsigned int) 0xF << 27) // (SDRC) Number of Command Recovery Time Cycles -// -------- SDRC_SRR : (SDRC Offset: 0xc) SDRAM Controller Self-refresh Register -------- -#define AT91C_SDRC_SRCB ((unsigned int) 0x1 << 0) // (SDRC) Self-refresh Command Bit -// -------- SDRC_LPR : (SDRC Offset: 0x10) SDRAM Controller Low-power Register -------- -#define AT91C_SDRC_LPCB ((unsigned int) 0x1 << 0) // (SDRC) Low-power Command Bit -// -------- SDRC_IER : (SDRC Offset: 0x14) SDRAM Controller Interrupt Enable Register -------- -#define AT91C_SDRC_RES ((unsigned int) 0x1 << 0) // (SDRC) Refresh Error Status -// -------- SDRC_IDR : (SDRC Offset: 0x18) SDRAM Controller Interrupt Disable Register -------- -// -------- SDRC_IMR : (SDRC Offset: 0x1c) SDRAM Controller Interrupt Mask Register -------- -// -------- SDRC_ISR : (SDRC Offset: 0x20) SDRAM Controller Interrupt Status Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Burst Flash Controller Interface -// ***************************************************************************** -typedef struct _AT91S_BFC { - AT91_REG BFC_MR; // BFC Mode Register -} AT91S_BFC, *AT91PS_BFC; - -// -------- BFC_MR : (BFC Offset: 0x0) BFC Mode Register -------- -#define AT91C_BFC_BFCOM ((unsigned int) 0x3 << 0) // (BFC) Burst Flash Controller Operating Mode -#define AT91C_BFC_BFCOM_DISABLED ((unsigned int) 0x0) // (BFC) NPCS0 is driven by the SMC or remains high. -#define AT91C_BFC_BFCOM_ASYNC ((unsigned int) 0x1) // (BFC) Asynchronous -#define AT91C_BFC_BFCOM_BURST_READ ((unsigned int) 0x2) // (BFC) Burst Read -#define AT91C_BFC_BFCC ((unsigned int) 0x3 << 2) // (BFC) Burst Flash Controller Operating Mode -#define AT91C_BFC_BFCC_MCK ((unsigned int) 0x1 << 2) // (BFC) Master Clock. -#define AT91C_BFC_BFCC_MCK_DIV_2 ((unsigned int) 0x2 << 2) // (BFC) Master Clock divided by 2. -#define AT91C_BFC_BFCC_MCK_DIV_4 ((unsigned int) 0x3 << 2) // (BFC) Master Clock divided by 4. -#define AT91C_BFC_AVL ((unsigned int) 0xF << 4) // (BFC) Address Valid Latency -#define AT91C_BFC_PAGES ((unsigned int) 0x7 << 8) // (BFC) Page Size -#define AT91C_BFC_PAGES_NO_PAGE ((unsigned int) 0x0 << 8) // (BFC) No page handling. -#define AT91C_BFC_PAGES_16 ((unsigned int) 0x1 << 8) // (BFC) 16 bytes page size. -#define AT91C_BFC_PAGES_32 ((unsigned int) 0x2 << 8) // (BFC) 32 bytes page size. -#define AT91C_BFC_PAGES_64 ((unsigned int) 0x3 << 8) // (BFC) 64 bytes page size. -#define AT91C_BFC_PAGES_128 ((unsigned int) 0x4 << 8) // (BFC) 128 bytes page size. -#define AT91C_BFC_PAGES_256 ((unsigned int) 0x5 << 8) // (BFC) 256 bytes page size. -#define AT91C_BFC_PAGES_512 ((unsigned int) 0x6 << 8) // (BFC) 512 bytes page size. -#define AT91C_BFC_PAGES_1024 ((unsigned int) 0x7 << 8) // (BFC) 1024 bytes page size. -#define AT91C_BFC_OEL ((unsigned int) 0x3 << 12) // (BFC) Output Enable Latency -#define AT91C_BFC_BAAEN ((unsigned int) 0x1 << 16) // (BFC) Burst Address Advance Enable -#define AT91C_BFC_BFOEH ((unsigned int) 0x1 << 17) // (BFC) Burst Flash Output Enable Handling -#define AT91C_BFC_MUXEN ((unsigned int) 0x1 << 18) // (BFC) Multiplexed Bus Enable -#define AT91C_BFC_RDYEN ((unsigned int) 0x1 << 19) // (BFC) Ready Enable Mode - -// ***************************************************************************** -// REGISTER ADDRESS DEFINITION FOR AT91RM9200 -// ***************************************************************************** -// ========== Register definition for SYS peripheral ========== -// ========== Register definition for MC peripheral ========== -#define AT91C_MC_PUER ((AT91_REG *) 0xFFFFFF54) // (MC) MC Protection Unit Enable Register -#define AT91C_MC_ASR ((AT91_REG *) 0xFFFFFF04) // (MC) MC Abort Status Register -#define AT91C_MC_PUP ((AT91_REG *) 0xFFFFFF50) // (MC) MC Protection Unit Peripherals -#define AT91C_MC_PUIA ((AT91_REG *) 0xFFFFFF10) // (MC) MC Protection Unit Area -#define AT91C_MC_AASR ((AT91_REG *) 0xFFFFFF08) // (MC) MC Abort Address Status Register -#define AT91C_MC_RCR ((AT91_REG *) 0xFFFFFF00) // (MC) MC Remap Control Register -// ========== Register definition for RTC peripheral ========== -#define AT91C_RTC_IMR ((AT91_REG *) 0xFFFFFE28) // (RTC) Interrupt Mask Register -#define AT91C_RTC_IER ((AT91_REG *) 0xFFFFFE20) // (RTC) Interrupt Enable Register -#define AT91C_RTC_SR ((AT91_REG *) 0xFFFFFE18) // (RTC) Status Register -#define AT91C_RTC_TIMALR ((AT91_REG *) 0xFFFFFE10) // (RTC) Time Alarm Register -#define AT91C_RTC_TIMR ((AT91_REG *) 0xFFFFFE08) // (RTC) Time Register -#define AT91C_RTC_CR ((AT91_REG *) 0xFFFFFE00) // (RTC) Control Register -#define AT91C_RTC_VER ((AT91_REG *) 0xFFFFFE2C) // (RTC) Valid Entry Register -#define AT91C_RTC_IDR ((AT91_REG *) 0xFFFFFE24) // (RTC) Interrupt Disable Register -#define AT91C_RTC_SCCR ((AT91_REG *) 0xFFFFFE1C) // (RTC) Status Clear Command Register -#define AT91C_RTC_CALALR ((AT91_REG *) 0xFFFFFE14) // (RTC) Calendar Alarm Register -#define AT91C_RTC_CALR ((AT91_REG *) 0xFFFFFE0C) // (RTC) Calendar Register -#define AT91C_RTC_MR ((AT91_REG *) 0xFFFFFE04) // (RTC) Mode Register -// ========== Register definition for ST peripheral ========== -#define AT91C_ST_CRTR ((AT91_REG *) 0xFFFFFD24) // (ST) Current Real-time Register -#define AT91C_ST_IMR ((AT91_REG *) 0xFFFFFD1C) // (ST) Interrupt Mask Register -#define AT91C_ST_IER ((AT91_REG *) 0xFFFFFD14) // (ST) Interrupt Enable Register -#define AT91C_ST_RTMR ((AT91_REG *) 0xFFFFFD0C) // (ST) Real-time Mode Register -#define AT91C_ST_PIMR ((AT91_REG *) 0xFFFFFD04) // (ST) Period Interval Mode Register -#define AT91C_ST_RTAR ((AT91_REG *) 0xFFFFFD20) // (ST) Real-time Alarm Register -#define AT91C_ST_IDR ((AT91_REG *) 0xFFFFFD18) // (ST) Interrupt Disable Register -#define AT91C_ST_SR ((AT91_REG *) 0xFFFFFD10) // (ST) Status Register -#define AT91C_ST_WDMR ((AT91_REG *) 0xFFFFFD08) // (ST) Watchdog Mode Register -#define AT91C_ST_CR ((AT91_REG *) 0xFFFFFD00) // (ST) Control Register -// ========== Register definition for PMC peripheral ========== -#define AT91C_PMC_SCSR ((AT91_REG *) 0xFFFFFC08) // (PMC) System Clock Status Register -#define AT91C_PMC_SCER ((AT91_REG *) 0xFFFFFC00) // (PMC) System Clock Enable Register -#define AT91C_PMC_IMR ((AT91_REG *) 0xFFFFFC6C) // (PMC) Interrupt Mask Register -#define AT91C_PMC_IDR ((AT91_REG *) 0xFFFFFC64) // (PMC) Interrupt Disable Register -#define AT91C_PMC_PCDR ((AT91_REG *) 0xFFFFFC14) // (PMC) Peripheral Clock Disable Register -#define AT91C_PMC_SCDR ((AT91_REG *) 0xFFFFFC04) // (PMC) System Clock Disable Register -#define AT91C_PMC_SR ((AT91_REG *) 0xFFFFFC68) // (PMC) Status Register -#define AT91C_PMC_IER ((AT91_REG *) 0xFFFFFC60) // (PMC) Interrupt Enable Register -#define AT91C_PMC_MCKR ((AT91_REG *) 0xFFFFFC30) // (PMC) Master Clock Register -#define AT91C_PMC_PCER ((AT91_REG *) 0xFFFFFC10) // (PMC) Peripheral Clock Enable Register -#define AT91C_PMC_PCSR ((AT91_REG *) 0xFFFFFC18) // (PMC) Peripheral Clock Status Register -#define AT91C_PMC_PCKR ((AT91_REG *) 0xFFFFFC40) // (PMC) Programmable Clock Register -// ========== Register definition for CKGR peripheral ========== -#define AT91C_CKGR_PLLBR ((AT91_REG *) 0xFFFFFC2C) // (CKGR) PLL B Register -#define AT91C_CKGR_MCFR ((AT91_REG *) 0xFFFFFC24) // (CKGR) Main Clock Frequency Register -#define AT91C_CKGR_PLLAR ((AT91_REG *) 0xFFFFFC28) // (CKGR) PLL A Register -#define AT91C_CKGR_MOR ((AT91_REG *) 0xFFFFFC20) // (CKGR) Main Oscillator Register -// ========== Register definition for PIOD peripheral ========== -#define AT91C_PIOD_PDSR ((AT91_REG *) 0xFFFFFA3C) // (PIOD) Pin Data Status Register -#define AT91C_PIOD_CODR ((AT91_REG *) 0xFFFFFA34) // (PIOD) Clear Output Data Register -#define AT91C_PIOD_OWER ((AT91_REG *) 0xFFFFFAA0) // (PIOD) Output Write Enable Register -#define AT91C_PIOD_MDER ((AT91_REG *) 0xFFFFFA50) // (PIOD) Multi-driver Enable Register -#define AT91C_PIOD_IMR ((AT91_REG *) 0xFFFFFA48) // (PIOD) Interrupt Mask Register -#define AT91C_PIOD_IER ((AT91_REG *) 0xFFFFFA40) // (PIOD) Interrupt Enable Register -#define AT91C_PIOD_ODSR ((AT91_REG *) 0xFFFFFA38) // (PIOD) Output Data Status Register -#define AT91C_PIOD_SODR ((AT91_REG *) 0xFFFFFA30) // (PIOD) Set Output Data Register -#define AT91C_PIOD_PER ((AT91_REG *) 0xFFFFFA00) // (PIOD) PIO Enable Register -#define AT91C_PIOD_OWDR ((AT91_REG *) 0xFFFFFAA4) // (PIOD) Output Write Disable Register -#define AT91C_PIOD_PPUER ((AT91_REG *) 0xFFFFFA64) // (PIOD) Pull-up Enable Register -#define AT91C_PIOD_MDDR ((AT91_REG *) 0xFFFFFA54) // (PIOD) Multi-driver Disable Register -#define AT91C_PIOD_ISR ((AT91_REG *) 0xFFFFFA4C) // (PIOD) Interrupt Status Register -#define AT91C_PIOD_IDR ((AT91_REG *) 0xFFFFFA44) // (PIOD) Interrupt Disable Register -#define AT91C_PIOD_PDR ((AT91_REG *) 0xFFFFFA04) // (PIOD) PIO Disable Register -#define AT91C_PIOD_ODR ((AT91_REG *) 0xFFFFFA14) // (PIOD) Output Disable Registerr -#define AT91C_PIOD_OWSR ((AT91_REG *) 0xFFFFFAA8) // (PIOD) Output Write Status Register -#define AT91C_PIOD_ABSR ((AT91_REG *) 0xFFFFFA78) // (PIOD) AB Select Status Register -#define AT91C_PIOD_ASR ((AT91_REG *) 0xFFFFFA70) // (PIOD) Select A Register -#define AT91C_PIOD_PPUSR ((AT91_REG *) 0xFFFFFA68) // (PIOD) Pad Pull-up Status Register -#define AT91C_PIOD_PPUDR ((AT91_REG *) 0xFFFFFA60) // (PIOD) Pull-up Disable Register -#define AT91C_PIOD_MDSR ((AT91_REG *) 0xFFFFFA58) // (PIOD) Multi-driver Status Register -#define AT91C_PIOD_PSR ((AT91_REG *) 0xFFFFFA08) // (PIOD) PIO Status Register -#define AT91C_PIOD_OER ((AT91_REG *) 0xFFFFFA10) // (PIOD) Output Enable Register -#define AT91C_PIOD_OSR ((AT91_REG *) 0xFFFFFA18) // (PIOD) Output Status Register -#define AT91C_PIOD_IFER ((AT91_REG *) 0xFFFFFA20) // (PIOD) Input Filter Enable Register -#define AT91C_PIOD_BSR ((AT91_REG *) 0xFFFFFA74) // (PIOD) Select B Register -#define AT91C_PIOD_IFDR ((AT91_REG *) 0xFFFFFA24) // (PIOD) Input Filter Disable Register -#define AT91C_PIOD_IFSR ((AT91_REG *) 0xFFFFFA28) // (PIOD) Input Filter Status Register -// ========== Register definition for PIOC peripheral ========== -#define AT91C_PIOC_IFDR ((AT91_REG *) 0xFFFFF824) // (PIOC) Input Filter Disable Register -#define AT91C_PIOC_ODR ((AT91_REG *) 0xFFFFF814) // (PIOC) Output Disable Registerr -#define AT91C_PIOC_ABSR ((AT91_REG *) 0xFFFFF878) // (PIOC) AB Select Status Register -#define AT91C_PIOC_SODR ((AT91_REG *) 0xFFFFF830) // (PIOC) Set Output Data Register -#define AT91C_PIOC_IFSR ((AT91_REG *) 0xFFFFF828) // (PIOC) Input Filter Status Register -#define AT91C_PIOC_CODR ((AT91_REG *) 0xFFFFF834) // (PIOC) Clear Output Data Register -#define AT91C_PIOC_ODSR ((AT91_REG *) 0xFFFFF838) // (PIOC) Output Data Status Register -#define AT91C_PIOC_IER ((AT91_REG *) 0xFFFFF840) // (PIOC) Interrupt Enable Register -#define AT91C_PIOC_IMR ((AT91_REG *) 0xFFFFF848) // (PIOC) Interrupt Mask Register -#define AT91C_PIOC_OWDR ((AT91_REG *) 0xFFFFF8A4) // (PIOC) Output Write Disable Register -#define AT91C_PIOC_MDDR ((AT91_REG *) 0xFFFFF854) // (PIOC) Multi-driver Disable Register -#define AT91C_PIOC_PDSR ((AT91_REG *) 0xFFFFF83C) // (PIOC) Pin Data Status Register -#define AT91C_PIOC_IDR ((AT91_REG *) 0xFFFFF844) // (PIOC) Interrupt Disable Register -#define AT91C_PIOC_ISR ((AT91_REG *) 0xFFFFF84C) // (PIOC) Interrupt Status Register -#define AT91C_PIOC_PDR ((AT91_REG *) 0xFFFFF804) // (PIOC) PIO Disable Register -#define AT91C_PIOC_OWSR ((AT91_REG *) 0xFFFFF8A8) // (PIOC) Output Write Status Register -#define AT91C_PIOC_OWER ((AT91_REG *) 0xFFFFF8A0) // (PIOC) Output Write Enable Register -#define AT91C_PIOC_ASR ((AT91_REG *) 0xFFFFF870) // (PIOC) Select A Register -#define AT91C_PIOC_PPUSR ((AT91_REG *) 0xFFFFF868) // (PIOC) Pad Pull-up Status Register -#define AT91C_PIOC_PPUDR ((AT91_REG *) 0xFFFFF860) // (PIOC) Pull-up Disable Register -#define AT91C_PIOC_MDSR ((AT91_REG *) 0xFFFFF858) // (PIOC) Multi-driver Status Register -#define AT91C_PIOC_MDER ((AT91_REG *) 0xFFFFF850) // (PIOC) Multi-driver Enable Register -#define AT91C_PIOC_IFER ((AT91_REG *) 0xFFFFF820) // (PIOC) Input Filter Enable Register -#define AT91C_PIOC_OSR ((AT91_REG *) 0xFFFFF818) // (PIOC) Output Status Register -#define AT91C_PIOC_OER ((AT91_REG *) 0xFFFFF810) // (PIOC) Output Enable Register -#define AT91C_PIOC_PSR ((AT91_REG *) 0xFFFFF808) // (PIOC) PIO Status Register -#define AT91C_PIOC_PER ((AT91_REG *) 0xFFFFF800) // (PIOC) PIO Enable Register -#define AT91C_PIOC_BSR ((AT91_REG *) 0xFFFFF874) // (PIOC) Select B Register -#define AT91C_PIOC_PPUER ((AT91_REG *) 0xFFFFF864) // (PIOC) Pull-up Enable Register -// ========== Register definition for PIOB peripheral ========== -#define AT91C_PIOB_OWSR ((AT91_REG *) 0xFFFFF6A8) // (PIOB) Output Write Status Register -#define AT91C_PIOB_PPUSR ((AT91_REG *) 0xFFFFF668) // (PIOB) Pad Pull-up Status Register -#define AT91C_PIOB_PPUDR ((AT91_REG *) 0xFFFFF660) // (PIOB) Pull-up Disable Register -#define AT91C_PIOB_MDSR ((AT91_REG *) 0xFFFFF658) // (PIOB) Multi-driver Status Register -#define AT91C_PIOB_MDER ((AT91_REG *) 0xFFFFF650) // (PIOB) Multi-driver Enable Register -#define AT91C_PIOB_IMR ((AT91_REG *) 0xFFFFF648) // (PIOB) Interrupt Mask Register -#define AT91C_PIOB_OSR ((AT91_REG *) 0xFFFFF618) // (PIOB) Output Status Register -#define AT91C_PIOB_OER ((AT91_REG *) 0xFFFFF610) // (PIOB) Output Enable Register -#define AT91C_PIOB_PSR ((AT91_REG *) 0xFFFFF608) // (PIOB) PIO Status Register -#define AT91C_PIOB_PER ((AT91_REG *) 0xFFFFF600) // (PIOB) PIO Enable Register -#define AT91C_PIOB_BSR ((AT91_REG *) 0xFFFFF674) // (PIOB) Select B Register -#define AT91C_PIOB_PPUER ((AT91_REG *) 0xFFFFF664) // (PIOB) Pull-up Enable Register -#define AT91C_PIOB_IFDR ((AT91_REG *) 0xFFFFF624) // (PIOB) Input Filter Disable Register -#define AT91C_PIOB_ODR ((AT91_REG *) 0xFFFFF614) // (PIOB) Output Disable Registerr -#define AT91C_PIOB_ABSR ((AT91_REG *) 0xFFFFF678) // (PIOB) AB Select Status Register -#define AT91C_PIOB_ASR ((AT91_REG *) 0xFFFFF670) // (PIOB) Select A Register -#define AT91C_PIOB_IFER ((AT91_REG *) 0xFFFFF620) // (PIOB) Input Filter Enable Register -#define AT91C_PIOB_IFSR ((AT91_REG *) 0xFFFFF628) // (PIOB) Input Filter Status Register -#define AT91C_PIOB_SODR ((AT91_REG *) 0xFFFFF630) // (PIOB) Set Output Data Register -#define AT91C_PIOB_ODSR ((AT91_REG *) 0xFFFFF638) // (PIOB) Output Data Status Register -#define AT91C_PIOB_CODR ((AT91_REG *) 0xFFFFF634) // (PIOB) Clear Output Data Register -#define AT91C_PIOB_PDSR ((AT91_REG *) 0xFFFFF63C) // (PIOB) Pin Data Status Register -#define AT91C_PIOB_OWER ((AT91_REG *) 0xFFFFF6A0) // (PIOB) Output Write Enable Register -#define AT91C_PIOB_IER ((AT91_REG *) 0xFFFFF640) // (PIOB) Interrupt Enable Register -#define AT91C_PIOB_OWDR ((AT91_REG *) 0xFFFFF6A4) // (PIOB) Output Write Disable Register -#define AT91C_PIOB_MDDR ((AT91_REG *) 0xFFFFF654) // (PIOB) Multi-driver Disable Register -#define AT91C_PIOB_ISR ((AT91_REG *) 0xFFFFF64C) // (PIOB) Interrupt Status Register -#define AT91C_PIOB_IDR ((AT91_REG *) 0xFFFFF644) // (PIOB) Interrupt Disable Register -#define AT91C_PIOB_PDR ((AT91_REG *) 0xFFFFF604) // (PIOB) PIO Disable Register -// ========== Register definition for PIOA peripheral ========== -#define AT91C_PIOA_IMR ((AT91_REG *) 0xFFFFF448) // (PIOA) Interrupt Mask Register -#define AT91C_PIOA_IER ((AT91_REG *) 0xFFFFF440) // (PIOA) Interrupt Enable Register -#define AT91C_PIOA_OWDR ((AT91_REG *) 0xFFFFF4A4) // (PIOA) Output Write Disable Register -#define AT91C_PIOA_ISR ((AT91_REG *) 0xFFFFF44C) // (PIOA) Interrupt Status Register -#define AT91C_PIOA_PPUDR ((AT91_REG *) 0xFFFFF460) // (PIOA) Pull-up Disable Register -#define AT91C_PIOA_MDSR ((AT91_REG *) 0xFFFFF458) // (PIOA) Multi-driver Status Register -#define AT91C_PIOA_MDER ((AT91_REG *) 0xFFFFF450) // (PIOA) Multi-driver Enable Register -#define AT91C_PIOA_PER ((AT91_REG *) 0xFFFFF400) // (PIOA) PIO Enable Register -#define AT91C_PIOA_PSR ((AT91_REG *) 0xFFFFF408) // (PIOA) PIO Status Register -#define AT91C_PIOA_OER ((AT91_REG *) 0xFFFFF410) // (PIOA) Output Enable Register -#define AT91C_PIOA_BSR ((AT91_REG *) 0xFFFFF474) // (PIOA) Select B Register -#define AT91C_PIOA_PPUER ((AT91_REG *) 0xFFFFF464) // (PIOA) Pull-up Enable Register -#define AT91C_PIOA_MDDR ((AT91_REG *) 0xFFFFF454) // (PIOA) Multi-driver Disable Register -#define AT91C_PIOA_PDR ((AT91_REG *) 0xFFFFF404) // (PIOA) PIO Disable Register -#define AT91C_PIOA_ODR ((AT91_REG *) 0xFFFFF414) // (PIOA) Output Disable Registerr -#define AT91C_PIOA_IFDR ((AT91_REG *) 0xFFFFF424) // (PIOA) Input Filter Disable Register -#define AT91C_PIOA_ABSR ((AT91_REG *) 0xFFFFF478) // (PIOA) AB Select Status Register -#define AT91C_PIOA_ASR ((AT91_REG *) 0xFFFFF470) // (PIOA) Select A Register -#define AT91C_PIOA_PPUSR ((AT91_REG *) 0xFFFFF468) // (PIOA) Pad Pull-up Status Register -#define AT91C_PIOA_ODSR ((AT91_REG *) 0xFFFFF438) // (PIOA) Output Data Status Register -#define AT91C_PIOA_SODR ((AT91_REG *) 0xFFFFF430) // (PIOA) Set Output Data Register -#define AT91C_PIOA_IFSR ((AT91_REG *) 0xFFFFF428) // (PIOA) Input Filter Status Register -#define AT91C_PIOA_IFER ((AT91_REG *) 0xFFFFF420) // (PIOA) Input Filter Enable Register -#define AT91C_PIOA_OSR ((AT91_REG *) 0xFFFFF418) // (PIOA) Output Status Register -#define AT91C_PIOA_IDR ((AT91_REG *) 0xFFFFF444) // (PIOA) Interrupt Disable Register -#define AT91C_PIOA_PDSR ((AT91_REG *) 0xFFFFF43C) // (PIOA) Pin Data Status Register -#define AT91C_PIOA_CODR ((AT91_REG *) 0xFFFFF434) // (PIOA) Clear Output Data Register -#define AT91C_PIOA_OWSR ((AT91_REG *) 0xFFFFF4A8) // (PIOA) Output Write Status Register -#define AT91C_PIOA_OWER ((AT91_REG *) 0xFFFFF4A0) // (PIOA) Output Write Enable Register -// ========== Register definition for DBGU peripheral ========== -#define AT91C_DBGU_C2R ((AT91_REG *) 0xFFFFF244) // (DBGU) Chip ID2 Register -#define AT91C_DBGU_THR ((AT91_REG *) 0xFFFFF21C) // (DBGU) Transmitter Holding Register -#define AT91C_DBGU_CSR ((AT91_REG *) 0xFFFFF214) // (DBGU) Channel Status Register -#define AT91C_DBGU_IDR ((AT91_REG *) 0xFFFFF20C) // (DBGU) Interrupt Disable Register -#define AT91C_DBGU_MR ((AT91_REG *) 0xFFFFF204) // (DBGU) Mode Register -#define AT91C_DBGU_FNTR ((AT91_REG *) 0xFFFFF248) // (DBGU) Force NTRST Register -#define AT91C_DBGU_C1R ((AT91_REG *) 0xFFFFF240) // (DBGU) Chip ID1 Register -#define AT91C_DBGU_BRGR ((AT91_REG *) 0xFFFFF220) // (DBGU) Baud Rate Generator Register -#define AT91C_DBGU_RHR ((AT91_REG *) 0xFFFFF218) // (DBGU) Receiver Holding Register -#define AT91C_DBGU_IMR ((AT91_REG *) 0xFFFFF210) // (DBGU) Interrupt Mask Register -#define AT91C_DBGU_IER ((AT91_REG *) 0xFFFFF208) // (DBGU) Interrupt Enable Register -#define AT91C_DBGU_CR ((AT91_REG *) 0xFFFFF200) // (DBGU) Control Register -// ========== Register definition for PDC_DBGU peripheral ========== -#define AT91C_DBGU_TNCR ((AT91_REG *) 0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register -#define AT91C_DBGU_RNCR ((AT91_REG *) 0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register -#define AT91C_DBGU_PTCR ((AT91_REG *) 0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register -#define AT91C_DBGU_PTSR ((AT91_REG *) 0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register -#define AT91C_DBGU_RCR ((AT91_REG *) 0xFFFFF304) // (PDC_DBGU) Receive Counter Register -#define AT91C_DBGU_TCR ((AT91_REG *) 0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register -#define AT91C_DBGU_RPR ((AT91_REG *) 0xFFFFF300) // (PDC_DBGU) Receive Pointer Register -#define AT91C_DBGU_TPR ((AT91_REG *) 0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register -#define AT91C_DBGU_RNPR ((AT91_REG *) 0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register -#define AT91C_DBGU_TNPR ((AT91_REG *) 0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register -// ========== Register definition for AIC peripheral ========== -#define AT91C_AIC_ICCR ((AT91_REG *) 0xFFFFF128) // (AIC) Interrupt Clear Command Register -#define AT91C_AIC_IECR ((AT91_REG *) 0xFFFFF120) // (AIC) Interrupt Enable Command Register -#define AT91C_AIC_SMR ((AT91_REG *) 0xFFFFF000) // (AIC) Source Mode Register -#define AT91C_AIC_ISCR ((AT91_REG *) 0xFFFFF12C) // (AIC) Interrupt Set Command Register -#define AT91C_AIC_EOICR ((AT91_REG *) 0xFFFFF130) // (AIC) End of Interrupt Command Register -#define AT91C_AIC_DCR ((AT91_REG *) 0xFFFFF138) // (AIC) Debug Control Register (Protect) -#define AT91C_AIC_FFER ((AT91_REG *) 0xFFFFF140) // (AIC) Fast Forcing Enable Register -#define AT91C_AIC_SVR ((AT91_REG *) 0xFFFFF080) // (AIC) Source Vector Register -#define AT91C_AIC_SPU ((AT91_REG *) 0xFFFFF134) // (AIC) Spurious Vector Register -#define AT91C_AIC_FFDR ((AT91_REG *) 0xFFFFF144) // (AIC) Fast Forcing Disable Register -#define AT91C_AIC_FVR ((AT91_REG *) 0xFFFFF104) // (AIC) FIQ Vector Register -#define AT91C_AIC_FFSR ((AT91_REG *) 0xFFFFF148) // (AIC) Fast Forcing Status Register -#define AT91C_AIC_IMR ((AT91_REG *) 0xFFFFF110) // (AIC) Interrupt Mask Register -#define AT91C_AIC_ISR ((AT91_REG *) 0xFFFFF108) // (AIC) Interrupt Status Register -#define AT91C_AIC_IVR ((AT91_REG *) 0xFFFFF100) // (AIC) IRQ Vector Register -#define AT91C_AIC_IDCR ((AT91_REG *) 0xFFFFF124) // (AIC) Interrupt Disable Command Register -#define AT91C_AIC_CISR ((AT91_REG *) 0xFFFFF114) // (AIC) Core Interrupt Status Register -#define AT91C_AIC_IPR ((AT91_REG *) 0xFFFFF10C) // (AIC) Interrupt Pending Register -// ========== Register definition for PDC_SPI peripheral ========== -#define AT91C_SPI_PTCR ((AT91_REG *) 0xFFFE0120) // (PDC_SPI) PDC Transfer Control Register -#define AT91C_SPI_TNPR ((AT91_REG *) 0xFFFE0118) // (PDC_SPI) Transmit Next Pointer Register -#define AT91C_SPI_RNPR ((AT91_REG *) 0xFFFE0110) // (PDC_SPI) Receive Next Pointer Register -#define AT91C_SPI_TPR ((AT91_REG *) 0xFFFE0108) // (PDC_SPI) Transmit Pointer Register -#define AT91C_SPI_RPR ((AT91_REG *) 0xFFFE0100) // (PDC_SPI) Receive Pointer Register -#define AT91C_SPI_PTSR ((AT91_REG *) 0xFFFE0124) // (PDC_SPI) PDC Transfer Status Register -#define AT91C_SPI_TNCR ((AT91_REG *) 0xFFFE011C) // (PDC_SPI) Transmit Next Counter Register -#define AT91C_SPI_RNCR ((AT91_REG *) 0xFFFE0114) // (PDC_SPI) Receive Next Counter Register -#define AT91C_SPI_TCR ((AT91_REG *) 0xFFFE010C) // (PDC_SPI) Transmit Counter Register -#define AT91C_SPI_RCR ((AT91_REG *) 0xFFFE0104) // (PDC_SPI) Receive Counter Register -// ========== Register definition for SPI peripheral ========== -#define AT91C_SPI_CSR ((AT91_REG *) 0xFFFE0030) // (SPI) Chip Select Register -#define AT91C_SPI_IDR ((AT91_REG *) 0xFFFE0018) // (SPI) Interrupt Disable Register -#define AT91C_SPI_SR ((AT91_REG *) 0xFFFE0010) // (SPI) Status Register -#define AT91C_SPI_RDR ((AT91_REG *) 0xFFFE0008) // (SPI) Receive Data Register -#define AT91C_SPI_CR ((AT91_REG *) 0xFFFE0000) // (SPI) Control Register -#define AT91C_SPI_IMR ((AT91_REG *) 0xFFFE001C) // (SPI) Interrupt Mask Register -#define AT91C_SPI_IER ((AT91_REG *) 0xFFFE0014) // (SPI) Interrupt Enable Register -#define AT91C_SPI_TDR ((AT91_REG *) 0xFFFE000C) // (SPI) Transmit Data Register -#define AT91C_SPI_MR ((AT91_REG *) 0xFFFE0004) // (SPI) Mode Register -// ========== Register definition for PDC_SSC2 peripheral ========== -#define AT91C_SSC2_PTCR ((AT91_REG *) 0xFFFD8120) // (PDC_SSC2) PDC Transfer Control Register -#define AT91C_SSC2_TNPR ((AT91_REG *) 0xFFFD8118) // (PDC_SSC2) Transmit Next Pointer Register -#define AT91C_SSC2_RNPR ((AT91_REG *) 0xFFFD8110) // (PDC_SSC2) Receive Next Pointer Register -#define AT91C_SSC2_TPR ((AT91_REG *) 0xFFFD8108) // (PDC_SSC2) Transmit Pointer Register -#define AT91C_SSC2_RPR ((AT91_REG *) 0xFFFD8100) // (PDC_SSC2) Receive Pointer Register -#define AT91C_SSC2_PTSR ((AT91_REG *) 0xFFFD8124) // (PDC_SSC2) PDC Transfer Status Register -#define AT91C_SSC2_TNCR ((AT91_REG *) 0xFFFD811C) // (PDC_SSC2) Transmit Next Counter Register -#define AT91C_SSC2_RNCR ((AT91_REG *) 0xFFFD8114) // (PDC_SSC2) Receive Next Counter Register -#define AT91C_SSC2_TCR ((AT91_REG *) 0xFFFD810C) // (PDC_SSC2) Transmit Counter Register -#define AT91C_SSC2_RCR ((AT91_REG *) 0xFFFD8104) // (PDC_SSC2) Receive Counter Register -// ========== Register definition for SSC2 peripheral ========== -#define AT91C_SSC2_IMR ((AT91_REG *) 0xFFFD804C) // (SSC2) Interrupt Mask Register -#define AT91C_SSC2_IER ((AT91_REG *) 0xFFFD8044) // (SSC2) Interrupt Enable Register -#define AT91C_SSC2_RC1R ((AT91_REG *) 0xFFFD803C) // (SSC2) Receive Compare 1 Register -#define AT91C_SSC2_TSHR ((AT91_REG *) 0xFFFD8034) // (SSC2) Transmit Sync Holding Register -#define AT91C_SSC2_CMR ((AT91_REG *) 0xFFFD8004) // (SSC2) Clock Mode Register -#define AT91C_SSC2_IDR ((AT91_REG *) 0xFFFD8048) // (SSC2) Interrupt Disable Register -#define AT91C_SSC2_TCMR ((AT91_REG *) 0xFFFD8018) // (SSC2) Transmit Clock Mode Register -#define AT91C_SSC2_RCMR ((AT91_REG *) 0xFFFD8010) // (SSC2) Receive Clock ModeRegister -#define AT91C_SSC2_CR ((AT91_REG *) 0xFFFD8000) // (SSC2) Control Register -#define AT91C_SSC2_RFMR ((AT91_REG *) 0xFFFD8014) // (SSC2) Receive Frame Mode Register -#define AT91C_SSC2_TFMR ((AT91_REG *) 0xFFFD801C) // (SSC2) Transmit Frame Mode Register -#define AT91C_SSC2_THR ((AT91_REG *) 0xFFFD8024) // (SSC2) Transmit Holding Register -#define AT91C_SSC2_SR ((AT91_REG *) 0xFFFD8040) // (SSC2) Status Register -#define AT91C_SSC2_RC0R ((AT91_REG *) 0xFFFD8038) // (SSC2) Receive Compare 0 Register -#define AT91C_SSC2_RSHR ((AT91_REG *) 0xFFFD8030) // (SSC2) Receive Sync Holding Register -#define AT91C_SSC2_RHR ((AT91_REG *) 0xFFFD8020) // (SSC2) Receive Holding Register -// ========== Register definition for PDC_SSC1 peripheral ========== -#define AT91C_SSC1_PTCR ((AT91_REG *) 0xFFFD4120) // (PDC_SSC1) PDC Transfer Control Register -#define AT91C_SSC1_TNPR ((AT91_REG *) 0xFFFD4118) // (PDC_SSC1) Transmit Next Pointer Register -#define AT91C_SSC1_RNPR ((AT91_REG *) 0xFFFD4110) // (PDC_SSC1) Receive Next Pointer Register -#define AT91C_SSC1_TPR ((AT91_REG *) 0xFFFD4108) // (PDC_SSC1) Transmit Pointer Register -#define AT91C_SSC1_RPR ((AT91_REG *) 0xFFFD4100) // (PDC_SSC1) Receive Pointer Register -#define AT91C_SSC1_PTSR ((AT91_REG *) 0xFFFD4124) // (PDC_SSC1) PDC Transfer Status Register -#define AT91C_SSC1_TNCR ((AT91_REG *) 0xFFFD411C) // (PDC_SSC1) Transmit Next Counter Register -#define AT91C_SSC1_RNCR ((AT91_REG *) 0xFFFD4114) // (PDC_SSC1) Receive Next Counter Register -#define AT91C_SSC1_TCR ((AT91_REG *) 0xFFFD410C) // (PDC_SSC1) Transmit Counter Register -#define AT91C_SSC1_RCR ((AT91_REG *) 0xFFFD4104) // (PDC_SSC1) Receive Counter Register -// ========== Register definition for SSC1 peripheral ========== -#define AT91C_SSC1_RFMR ((AT91_REG *) 0xFFFD4014) // (SSC1) Receive Frame Mode Register -#define AT91C_SSC1_CMR ((AT91_REG *) 0xFFFD4004) // (SSC1) Clock Mode Register -#define AT91C_SSC1_IDR ((AT91_REG *) 0xFFFD4048) // (SSC1) Interrupt Disable Register -#define AT91C_SSC1_SR ((AT91_REG *) 0xFFFD4040) // (SSC1) Status Register -#define AT91C_SSC1_RC0R ((AT91_REG *) 0xFFFD4038) // (SSC1) Receive Compare 0 Register -#define AT91C_SSC1_RSHR ((AT91_REG *) 0xFFFD4030) // (SSC1) Receive Sync Holding Register -#define AT91C_SSC1_RHR ((AT91_REG *) 0xFFFD4020) // (SSC1) Receive Holding Register -#define AT91C_SSC1_TCMR ((AT91_REG *) 0xFFFD4018) // (SSC1) Transmit Clock Mode Register -#define AT91C_SSC1_RCMR ((AT91_REG *) 0xFFFD4010) // (SSC1) Receive Clock ModeRegister -#define AT91C_SSC1_CR ((AT91_REG *) 0xFFFD4000) // (SSC1) Control Register -#define AT91C_SSC1_IMR ((AT91_REG *) 0xFFFD404C) // (SSC1) Interrupt Mask Register -#define AT91C_SSC1_IER ((AT91_REG *) 0xFFFD4044) // (SSC1) Interrupt Enable Register -#define AT91C_SSC1_RC1R ((AT91_REG *) 0xFFFD403C) // (SSC1) Receive Compare 1 Register -#define AT91C_SSC1_TSHR ((AT91_REG *) 0xFFFD4034) // (SSC1) Transmit Sync Holding Register -#define AT91C_SSC1_THR ((AT91_REG *) 0xFFFD4024) // (SSC1) Transmit Holding Register -#define AT91C_SSC1_TFMR ((AT91_REG *) 0xFFFD401C) // (SSC1) Transmit Frame Mode Register -// ========== Register definition for PDC_SSC0 peripheral ========== -#define AT91C_SSC0_PTCR ((AT91_REG *) 0xFFFD0120) // (PDC_SSC0) PDC Transfer Control Register -#define AT91C_SSC0_TNPR ((AT91_REG *) 0xFFFD0118) // (PDC_SSC0) Transmit Next Pointer Register -#define AT91C_SSC0_RNPR ((AT91_REG *) 0xFFFD0110) // (PDC_SSC0) Receive Next Pointer Register -#define AT91C_SSC0_TPR ((AT91_REG *) 0xFFFD0108) // (PDC_SSC0) Transmit Pointer Register -#define AT91C_SSC0_RPR ((AT91_REG *) 0xFFFD0100) // (PDC_SSC0) Receive Pointer Register -#define AT91C_SSC0_PTSR ((AT91_REG *) 0xFFFD0124) // (PDC_SSC0) PDC Transfer Status Register -#define AT91C_SSC0_TNCR ((AT91_REG *) 0xFFFD011C) // (PDC_SSC0) Transmit Next Counter Register -#define AT91C_SSC0_RNCR ((AT91_REG *) 0xFFFD0114) // (PDC_SSC0) Receive Next Counter Register -#define AT91C_SSC0_TCR ((AT91_REG *) 0xFFFD010C) // (PDC_SSC0) Transmit Counter Register -#define AT91C_SSC0_RCR ((AT91_REG *) 0xFFFD0104) // (PDC_SSC0) Receive Counter Register -// ========== Register definition for SSC0 peripheral ========== -#define AT91C_SSC0_IMR ((AT91_REG *) 0xFFFD004C) // (SSC0) Interrupt Mask Register -#define AT91C_SSC0_IER ((AT91_REG *) 0xFFFD0044) // (SSC0) Interrupt Enable Register -#define AT91C_SSC0_RC1R ((AT91_REG *) 0xFFFD003C) // (SSC0) Receive Compare 1 Register -#define AT91C_SSC0_TSHR ((AT91_REG *) 0xFFFD0034) // (SSC0) Transmit Sync Holding Register -#define AT91C_SSC0_THR ((AT91_REG *) 0xFFFD0024) // (SSC0) Transmit Holding Register -#define AT91C_SSC0_TFMR ((AT91_REG *) 0xFFFD001C) // (SSC0) Transmit Frame Mode Register -#define AT91C_SSC0_RFMR ((AT91_REG *) 0xFFFD0014) // (SSC0) Receive Frame Mode Register -#define AT91C_SSC0_CMR ((AT91_REG *) 0xFFFD0004) // (SSC0) Clock Mode Register -#define AT91C_SSC0_IDR ((AT91_REG *) 0xFFFD0048) // (SSC0) Interrupt Disable Register -#define AT91C_SSC0_SR ((AT91_REG *) 0xFFFD0040) // (SSC0) Status Register -#define AT91C_SSC0_RC0R ((AT91_REG *) 0xFFFD0038) // (SSC0) Receive Compare 0 Register -#define AT91C_SSC0_RSHR ((AT91_REG *) 0xFFFD0030) // (SSC0) Receive Sync Holding Register -#define AT91C_SSC0_RHR ((AT91_REG *) 0xFFFD0020) // (SSC0) Receive Holding Register -#define AT91C_SSC0_TCMR ((AT91_REG *) 0xFFFD0018) // (SSC0) Transmit Clock Mode Register -#define AT91C_SSC0_RCMR ((AT91_REG *) 0xFFFD0010) // (SSC0) Receive Clock ModeRegister -#define AT91C_SSC0_CR ((AT91_REG *) 0xFFFD0000) // (SSC0) Control Register -// ========== Register definition for PDC_US3 peripheral ========== -#define AT91C_US3_PTSR ((AT91_REG *) 0xFFFCC124) // (PDC_US3) PDC Transfer Status Register -#define AT91C_US3_TNCR ((AT91_REG *) 0xFFFCC11C) // (PDC_US3) Transmit Next Counter Register -#define AT91C_US3_RNCR ((AT91_REG *) 0xFFFCC114) // (PDC_US3) Receive Next Counter Register -#define AT91C_US3_TCR ((AT91_REG *) 0xFFFCC10C) // (PDC_US3) Transmit Counter Register -#define AT91C_US3_RCR ((AT91_REG *) 0xFFFCC104) // (PDC_US3) Receive Counter Register -#define AT91C_US3_PTCR ((AT91_REG *) 0xFFFCC120) // (PDC_US3) PDC Transfer Control Register -#define AT91C_US3_TNPR ((AT91_REG *) 0xFFFCC118) // (PDC_US3) Transmit Next Pointer Register -#define AT91C_US3_RNPR ((AT91_REG *) 0xFFFCC110) // (PDC_US3) Receive Next Pointer Register -#define AT91C_US3_TPR ((AT91_REG *) 0xFFFCC108) // (PDC_US3) Transmit Pointer Register -#define AT91C_US3_RPR ((AT91_REG *) 0xFFFCC100) // (PDC_US3) Receive Pointer Register -// ========== Register definition for US3 peripheral ========== -#define AT91C_US3_IF ((AT91_REG *) 0xFFFCC04C) // (US3) IRDA_FILTER Register -#define AT91C_US3_NER ((AT91_REG *) 0xFFFCC044) // (US3) Nb Errors Register -#define AT91C_US3_RTOR ((AT91_REG *) 0xFFFCC024) // (US3) Receiver Time-out Register -#define AT91C_US3_THR ((AT91_REG *) 0xFFFCC01C) // (US3) Transmitter Holding Register -#define AT91C_US3_CSR ((AT91_REG *) 0xFFFCC014) // (US3) Channel Status Register -#define AT91C_US3_IDR ((AT91_REG *) 0xFFFCC00C) // (US3) Interrupt Disable Register -#define AT91C_US3_MR ((AT91_REG *) 0xFFFCC004) // (US3) Mode Register -#define AT91C_US3_XXR ((AT91_REG *) 0xFFFCC048) // (US3) XON_XOFF Register -#define AT91C_US3_FIDI ((AT91_REG *) 0xFFFCC040) // (US3) FI_DI_Ratio Register -#define AT91C_US3_TTGR ((AT91_REG *) 0xFFFCC028) // (US3) Transmitter Time-guard Register -#define AT91C_US3_BRGR ((AT91_REG *) 0xFFFCC020) // (US3) Baud Rate Generator Register -#define AT91C_US3_RHR ((AT91_REG *) 0xFFFCC018) // (US3) Receiver Holding Register -#define AT91C_US3_IMR ((AT91_REG *) 0xFFFCC010) // (US3) Interrupt Mask Register -#define AT91C_US3_IER ((AT91_REG *) 0xFFFCC008) // (US3) Interrupt Enable Register -#define AT91C_US3_CR ((AT91_REG *) 0xFFFCC000) // (US3) Control Register -// ========== Register definition for PDC_US2 peripheral ========== -#define AT91C_US2_PTSR ((AT91_REG *) 0xFFFC8124) // (PDC_US2) PDC Transfer Status Register -#define AT91C_US2_TNCR ((AT91_REG *) 0xFFFC811C) // (PDC_US2) Transmit Next Counter Register -#define AT91C_US2_RNCR ((AT91_REG *) 0xFFFC8114) // (PDC_US2) Receive Next Counter Register -#define AT91C_US2_TCR ((AT91_REG *) 0xFFFC810C) // (PDC_US2) Transmit Counter Register -#define AT91C_US2_PTCR ((AT91_REG *) 0xFFFC8120) // (PDC_US2) PDC Transfer Control Register -#define AT91C_US2_RCR ((AT91_REG *) 0xFFFC8104) // (PDC_US2) Receive Counter Register -#define AT91C_US2_TNPR ((AT91_REG *) 0xFFFC8118) // (PDC_US2) Transmit Next Pointer Register -#define AT91C_US2_RPR ((AT91_REG *) 0xFFFC8100) // (PDC_US2) Receive Pointer Register -#define AT91C_US2_TPR ((AT91_REG *) 0xFFFC8108) // (PDC_US2) Transmit Pointer Register -#define AT91C_US2_RNPR ((AT91_REG *) 0xFFFC8110) // (PDC_US2) Receive Next Pointer Register -// ========== Register definition for US2 peripheral ========== -#define AT91C_US2_XXR ((AT91_REG *) 0xFFFC8048) // (US2) XON_XOFF Register -#define AT91C_US2_FIDI ((AT91_REG *) 0xFFFC8040) // (US2) FI_DI_Ratio Register -#define AT91C_US2_TTGR ((AT91_REG *) 0xFFFC8028) // (US2) Transmitter Time-guard Register -#define AT91C_US2_BRGR ((AT91_REG *) 0xFFFC8020) // (US2) Baud Rate Generator Register -#define AT91C_US2_RHR ((AT91_REG *) 0xFFFC8018) // (US2) Receiver Holding Register -#define AT91C_US2_IMR ((AT91_REG *) 0xFFFC8010) // (US2) Interrupt Mask Register -#define AT91C_US2_IER ((AT91_REG *) 0xFFFC8008) // (US2) Interrupt Enable Register -#define AT91C_US2_CR ((AT91_REG *) 0xFFFC8000) // (US2) Control Register -#define AT91C_US2_IF ((AT91_REG *) 0xFFFC804C) // (US2) IRDA_FILTER Register -#define AT91C_US2_NER ((AT91_REG *) 0xFFFC8044) // (US2) Nb Errors Register -#define AT91C_US2_RTOR ((AT91_REG *) 0xFFFC8024) // (US2) Receiver Time-out Register -#define AT91C_US2_THR ((AT91_REG *) 0xFFFC801C) // (US2) Transmitter Holding Register -#define AT91C_US2_CSR ((AT91_REG *) 0xFFFC8014) // (US2) Channel Status Register -#define AT91C_US2_IDR ((AT91_REG *) 0xFFFC800C) // (US2) Interrupt Disable Register -#define AT91C_US2_MR ((AT91_REG *) 0xFFFC8004) // (US2) Mode Register -// ========== Register definition for PDC_US1 peripheral ========== -#define AT91C_US1_PTSR ((AT91_REG *) 0xFFFC4124) // (PDC_US1) PDC Transfer Status Register -#define AT91C_US1_TNCR ((AT91_REG *) 0xFFFC411C) // (PDC_US1) Transmit Next Counter Register -#define AT91C_US1_RNCR ((AT91_REG *) 0xFFFC4114) // (PDC_US1) Receive Next Counter Register -#define AT91C_US1_TCR ((AT91_REG *) 0xFFFC410C) // (PDC_US1) Transmit Counter Register -#define AT91C_US1_RCR ((AT91_REG *) 0xFFFC4104) // (PDC_US1) Receive Counter Register -#define AT91C_US1_PTCR ((AT91_REG *) 0xFFFC4120) // (PDC_US1) PDC Transfer Control Register -#define AT91C_US1_TNPR ((AT91_REG *) 0xFFFC4118) // (PDC_US1) Transmit Next Pointer Register -#define AT91C_US1_RNPR ((AT91_REG *) 0xFFFC4110) // (PDC_US1) Receive Next Pointer Register -#define AT91C_US1_TPR ((AT91_REG *) 0xFFFC4108) // (PDC_US1) Transmit Pointer Register -#define AT91C_US1_RPR ((AT91_REG *) 0xFFFC4100) // (PDC_US1) Receive Pointer Register -// ========== Register definition for US1 peripheral ========== -#define AT91C_US1_XXR ((AT91_REG *) 0xFFFC4048) // (US1) XON_XOFF Register -#define AT91C_US1_RHR ((AT91_REG *) 0xFFFC4018) // (US1) Receiver Holding Register -#define AT91C_US1_IMR ((AT91_REG *) 0xFFFC4010) // (US1) Interrupt Mask Register -#define AT91C_US1_IER ((AT91_REG *) 0xFFFC4008) // (US1) Interrupt Enable Register -#define AT91C_US1_CR ((AT91_REG *) 0xFFFC4000) // (US1) Control Register -#define AT91C_US1_RTOR ((AT91_REG *) 0xFFFC4024) // (US1) Receiver Time-out Register -#define AT91C_US1_THR ((AT91_REG *) 0xFFFC401C) // (US1) Transmitter Holding Register -#define AT91C_US1_CSR ((AT91_REG *) 0xFFFC4014) // (US1) Channel Status Register -#define AT91C_US1_IDR ((AT91_REG *) 0xFFFC400C) // (US1) Interrupt Disable Register -#define AT91C_US1_FIDI ((AT91_REG *) 0xFFFC4040) // (US1) FI_DI_Ratio Register -#define AT91C_US1_BRGR ((AT91_REG *) 0xFFFC4020) // (US1) Baud Rate Generator Register -#define AT91C_US1_TTGR ((AT91_REG *) 0xFFFC4028) // (US1) Transmitter Time-guard Register -#define AT91C_US1_IF ((AT91_REG *) 0xFFFC404C) // (US1) IRDA_FILTER Register -#define AT91C_US1_NER ((AT91_REG *) 0xFFFC4044) // (US1) Nb Errors Register -#define AT91C_US1_MR ((AT91_REG *) 0xFFFC4004) // (US1) Mode Register -// ========== Register definition for PDC_US0 peripheral ========== -#define AT91C_US0_PTCR ((AT91_REG *) 0xFFFC0120) // (PDC_US0) PDC Transfer Control Register -#define AT91C_US0_TNPR ((AT91_REG *) 0xFFFC0118) // (PDC_US0) Transmit Next Pointer Register -#define AT91C_US0_RNPR ((AT91_REG *) 0xFFFC0110) // (PDC_US0) Receive Next Pointer Register -#define AT91C_US0_TPR ((AT91_REG *) 0xFFFC0108) // (PDC_US0) Transmit Pointer Register -#define AT91C_US0_RPR ((AT91_REG *) 0xFFFC0100) // (PDC_US0) Receive Pointer Register -#define AT91C_US0_PTSR ((AT91_REG *) 0xFFFC0124) // (PDC_US0) PDC Transfer Status Register -#define AT91C_US0_TNCR ((AT91_REG *) 0xFFFC011C) // (PDC_US0) Transmit Next Counter Register -#define AT91C_US0_RNCR ((AT91_REG *) 0xFFFC0114) // (PDC_US0) Receive Next Counter Register -#define AT91C_US0_TCR ((AT91_REG *) 0xFFFC010C) // (PDC_US0) Transmit Counter Register -#define AT91C_US0_RCR ((AT91_REG *) 0xFFFC0104) // (PDC_US0) Receive Counter Register -// ========== Register definition for US0 peripheral ========== -#define AT91C_US0_TTGR ((AT91_REG *) 0xFFFC0028) // (US0) Transmitter Time-guard Register -#define AT91C_US0_BRGR ((AT91_REG *) 0xFFFC0020) // (US0) Baud Rate Generator Register -#define AT91C_US0_RHR ((AT91_REG *) 0xFFFC0018) // (US0) Receiver Holding Register -#define AT91C_US0_IMR ((AT91_REG *) 0xFFFC0010) // (US0) Interrupt Mask Register -#define AT91C_US0_NER ((AT91_REG *) 0xFFFC0044) // (US0) Nb Errors Register -#define AT91C_US0_RTOR ((AT91_REG *) 0xFFFC0024) // (US0) Receiver Time-out Register -#define AT91C_US0_XXR ((AT91_REG *) 0xFFFC0048) // (US0) XON_XOFF Register -#define AT91C_US0_FIDI ((AT91_REG *) 0xFFFC0040) // (US0) FI_DI_Ratio Register -#define AT91C_US0_CR ((AT91_REG *) 0xFFFC0000) // (US0) Control Register -#define AT91C_US0_IER ((AT91_REG *) 0xFFFC0008) // (US0) Interrupt Enable Register -#define AT91C_US0_IF ((AT91_REG *) 0xFFFC004C) // (US0) IRDA_FILTER Register -#define AT91C_US0_MR ((AT91_REG *) 0xFFFC0004) // (US0) Mode Register -#define AT91C_US0_IDR ((AT91_REG *) 0xFFFC000C) // (US0) Interrupt Disable Register -#define AT91C_US0_CSR ((AT91_REG *) 0xFFFC0014) // (US0) Channel Status Register -#define AT91C_US0_THR ((AT91_REG *) 0xFFFC001C) // (US0) Transmitter Holding Register -// ========== Register definition for TWI peripheral ========== -#define AT91C_TWI_RHR ((AT91_REG *) 0xFFFB8030) // (TWI) Receive Holding Register -#define AT91C_TWI_IDR ((AT91_REG *) 0xFFFB8028) // (TWI) Interrupt Disable Register -#define AT91C_TWI_SR ((AT91_REG *) 0xFFFB8020) // (TWI) Status Register -#define AT91C_TWI_CWGR ((AT91_REG *) 0xFFFB8010) // (TWI) Clock Waveform Generator Register -#define AT91C_TWI_SMR ((AT91_REG *) 0xFFFB8008) // (TWI) Slave Mode Register -#define AT91C_TWI_CR ((AT91_REG *) 0xFFFB8000) // (TWI) Control Register -#define AT91C_TWI_THR ((AT91_REG *) 0xFFFB8034) // (TWI) Transmit Holding Register -#define AT91C_TWI_IMR ((AT91_REG *) 0xFFFB802C) // (TWI) Interrupt Mask Register -#define AT91C_TWI_IER ((AT91_REG *) 0xFFFB8024) // (TWI) Interrupt Enable Register -#define AT91C_TWI_IADR ((AT91_REG *) 0xFFFB800C) // (TWI) Internal Address Register -#define AT91C_TWI_MMR ((AT91_REG *) 0xFFFB8004) // (TWI) Master Mode Register -// ========== Register definition for PDC_MCI peripheral ========== -#define AT91C_MCI_PTCR ((AT91_REG *) 0xFFFB4120) // (PDC_MCI) PDC Transfer Control Register -#define AT91C_MCI_TNPR ((AT91_REG *) 0xFFFB4118) // (PDC_MCI) Transmit Next Pointer Register -#define AT91C_MCI_RNPR ((AT91_REG *) 0xFFFB4110) // (PDC_MCI) Receive Next Pointer Register -#define AT91C_MCI_TPR ((AT91_REG *) 0xFFFB4108) // (PDC_MCI) Transmit Pointer Register -#define AT91C_MCI_RPR ((AT91_REG *) 0xFFFB4100) // (PDC_MCI) Receive Pointer Register -#define AT91C_MCI_PTSR ((AT91_REG *) 0xFFFB4124) // (PDC_MCI) PDC Transfer Status Register -#define AT91C_MCI_TNCR ((AT91_REG *) 0xFFFB411C) // (PDC_MCI) Transmit Next Counter Register -#define AT91C_MCI_RNCR ((AT91_REG *) 0xFFFB4114) // (PDC_MCI) Receive Next Counter Register -#define AT91C_MCI_TCR ((AT91_REG *) 0xFFFB410C) // (PDC_MCI) Transmit Counter Register -#define AT91C_MCI_RCR ((AT91_REG *) 0xFFFB4104) // (PDC_MCI) Receive Counter Register -// ========== Register definition for MCI peripheral ========== -#define AT91C_MCI_IDR ((AT91_REG *) 0xFFFB4048) // (MCI) MCI Interrupt Disable Register -#define AT91C_MCI_SR ((AT91_REG *) 0xFFFB4040) // (MCI) MCI Status Register -#define AT91C_MCI_RDR ((AT91_REG *) 0xFFFB4030) // (MCI) MCI Receive Data Register -#define AT91C_MCI_RSPR ((AT91_REG *) 0xFFFB4020) // (MCI) MCI Response Register -#define AT91C_MCI_ARGR ((AT91_REG *) 0xFFFB4010) // (MCI) MCI Argument Register -#define AT91C_MCI_DTOR ((AT91_REG *) 0xFFFB4008) // (MCI) MCI Data Timeout Register -#define AT91C_MCI_CR ((AT91_REG *) 0xFFFB4000) // (MCI) MCI Control Register -#define AT91C_MCI_IMR ((AT91_REG *) 0xFFFB404C) // (MCI) MCI Interrupt Mask Register -#define AT91C_MCI_IER ((AT91_REG *) 0xFFFB4044) // (MCI) MCI Interrupt Enable Register -#define AT91C_MCI_TDR ((AT91_REG *) 0xFFFB4034) // (MCI) MCI Transmit Data Register -#define AT91C_MCI_CMDR ((AT91_REG *) 0xFFFB4014) // (MCI) MCI Command Register -#define AT91C_MCI_SDCR ((AT91_REG *) 0xFFFB400C) // (MCI) MCI SD Card Register -#define AT91C_MCI_MR ((AT91_REG *) 0xFFFB4004) // (MCI) MCI Mode Register -// ========== Register definition for UDP peripheral ========== -#define AT91C_UDP_ISR ((AT91_REG *) 0xFFFB001C) // (UDP) Interrupt Status Register -#define AT91C_UDP_IDR ((AT91_REG *) 0xFFFB0014) // (UDP) Interrupt Disable Register -#define AT91C_UDP_GLBSTATE ((AT91_REG *) 0xFFFB0004) // (UDP) Global State Register -#define AT91C_UDP_FDR ((AT91_REG *) 0xFFFB0050) // (UDP) Endpoint FIFO Data Register -#define AT91C_UDP_CSR ((AT91_REG *) 0xFFFB0030) // (UDP) Endpoint Control and Status Register -#define AT91C_UDP_RSTEP ((AT91_REG *) 0xFFFB0028) // (UDP) Reset Endpoint Register -#define AT91C_UDP_ICR ((AT91_REG *) 0xFFFB0020) // (UDP) Interrupt Clear Register -#define AT91C_UDP_IMR ((AT91_REG *) 0xFFFB0018) // (UDP) Interrupt Mask Register -#define AT91C_UDP_IER ((AT91_REG *) 0xFFFB0010) // (UDP) Interrupt Enable Register -#define AT91C_UDP_FADDR ((AT91_REG *) 0xFFFB0008) // (UDP) Function Address Register -#define AT91C_UDP_NUM ((AT91_REG *) 0xFFFB0000) // (UDP) Frame Number Register -// ========== Register definition for TC5 peripheral ========== -#define AT91C_TC5_CMR ((AT91_REG *) 0xFFFA4084) // (TC5) Channel Mode Register -#define AT91C_TC5_IDR ((AT91_REG *) 0xFFFA40A8) // (TC5) Interrupt Disable Register -#define AT91C_TC5_SR ((AT91_REG *) 0xFFFA40A0) // (TC5) Status Register -#define AT91C_TC5_RB ((AT91_REG *) 0xFFFA4098) // (TC5) Register B -#define AT91C_TC5_CV ((AT91_REG *) 0xFFFA4090) // (TC5) Counter Value -#define AT91C_TC5_CCR ((AT91_REG *) 0xFFFA4080) // (TC5) Channel Control Register -#define AT91C_TC5_IMR ((AT91_REG *) 0xFFFA40AC) // (TC5) Interrupt Mask Register -#define AT91C_TC5_IER ((AT91_REG *) 0xFFFA40A4) // (TC5) Interrupt Enable Register -#define AT91C_TC5_RC ((AT91_REG *) 0xFFFA409C) // (TC5) Register C -#define AT91C_TC5_RA ((AT91_REG *) 0xFFFA4094) // (TC5) Register A -// ========== Register definition for TC4 peripheral ========== -#define AT91C_TC4_IMR ((AT91_REG *) 0xFFFA406C) // (TC4) Interrupt Mask Register -#define AT91C_TC4_IER ((AT91_REG *) 0xFFFA4064) // (TC4) Interrupt Enable Register -#define AT91C_TC4_RC ((AT91_REG *) 0xFFFA405C) // (TC4) Register C -#define AT91C_TC4_RA ((AT91_REG *) 0xFFFA4054) // (TC4) Register A -#define AT91C_TC4_CMR ((AT91_REG *) 0xFFFA4044) // (TC4) Channel Mode Register -#define AT91C_TC4_IDR ((AT91_REG *) 0xFFFA4068) // (TC4) Interrupt Disable Register -#define AT91C_TC4_SR ((AT91_REG *) 0xFFFA4060) // (TC4) Status Register -#define AT91C_TC4_RB ((AT91_REG *) 0xFFFA4058) // (TC4) Register B -#define AT91C_TC4_CV ((AT91_REG *) 0xFFFA4050) // (TC4) Counter Value -#define AT91C_TC4_CCR ((AT91_REG *) 0xFFFA4040) // (TC4) Channel Control Register -// ========== Register definition for TC3 peripheral ========== -#define AT91C_TC3_IMR ((AT91_REG *) 0xFFFA402C) // (TC3) Interrupt Mask Register -#define AT91C_TC3_CV ((AT91_REG *) 0xFFFA4010) // (TC3) Counter Value -#define AT91C_TC3_CCR ((AT91_REG *) 0xFFFA4000) // (TC3) Channel Control Register -#define AT91C_TC3_IER ((AT91_REG *) 0xFFFA4024) // (TC3) Interrupt Enable Register -#define AT91C_TC3_CMR ((AT91_REG *) 0xFFFA4004) // (TC3) Channel Mode Register -#define AT91C_TC3_RA ((AT91_REG *) 0xFFFA4014) // (TC3) Register A -#define AT91C_TC3_RC ((AT91_REG *) 0xFFFA401C) // (TC3) Register C -#define AT91C_TC3_IDR ((AT91_REG *) 0xFFFA4028) // (TC3) Interrupt Disable Register -#define AT91C_TC3_RB ((AT91_REG *) 0xFFFA4018) // (TC3) Register B -#define AT91C_TC3_SR ((AT91_REG *) 0xFFFA4020) // (TC3) Status Register -// ========== Register definition for TCB1 peripheral ========== -#define AT91C_TCB1_BCR ((AT91_REG *) 0xFFFA4140) // (TCB1) TC Block Control Register -#define AT91C_TCB1_BMR ((AT91_REG *) 0xFFFA4144) // (TCB1) TC Block Mode Register -// ========== Register definition for TC2 peripheral ========== -#define AT91C_TC2_IMR ((AT91_REG *) 0xFFFA00AC) // (TC2) Interrupt Mask Register -#define AT91C_TC2_IER ((AT91_REG *) 0xFFFA00A4) // (TC2) Interrupt Enable Register -#define AT91C_TC2_RC ((AT91_REG *) 0xFFFA009C) // (TC2) Register C -#define AT91C_TC2_RA ((AT91_REG *) 0xFFFA0094) // (TC2) Register A -#define AT91C_TC2_CMR ((AT91_REG *) 0xFFFA0084) // (TC2) Channel Mode Register -#define AT91C_TC2_IDR ((AT91_REG *) 0xFFFA00A8) // (TC2) Interrupt Disable Register -#define AT91C_TC2_SR ((AT91_REG *) 0xFFFA00A0) // (TC2) Status Register -#define AT91C_TC2_RB ((AT91_REG *) 0xFFFA0098) // (TC2) Register B -#define AT91C_TC2_CV ((AT91_REG *) 0xFFFA0090) // (TC2) Counter Value -#define AT91C_TC2_CCR ((AT91_REG *) 0xFFFA0080) // (TC2) Channel Control Register -// ========== Register definition for TC1 peripheral ========== -#define AT91C_TC1_IMR ((AT91_REG *) 0xFFFA006C) // (TC1) Interrupt Mask Register -#define AT91C_TC1_IER ((AT91_REG *) 0xFFFA0064) // (TC1) Interrupt Enable Register -#define AT91C_TC1_RC ((AT91_REG *) 0xFFFA005C) // (TC1) Register C -#define AT91C_TC1_RA ((AT91_REG *) 0xFFFA0054) // (TC1) Register A -#define AT91C_TC1_CMR ((AT91_REG *) 0xFFFA0044) // (TC1) Channel Mode Register -#define AT91C_TC1_IDR ((AT91_REG *) 0xFFFA0068) // (TC1) Interrupt Disable Register -#define AT91C_TC1_SR ((AT91_REG *) 0xFFFA0060) // (TC1) Status Register -#define AT91C_TC1_RB ((AT91_REG *) 0xFFFA0058) // (TC1) Register B -#define AT91C_TC1_CV ((AT91_REG *) 0xFFFA0050) // (TC1) Counter Value -#define AT91C_TC1_CCR ((AT91_REG *) 0xFFFA0040) // (TC1) Channel Control Register -// ========== Register definition for TC0 peripheral ========== -#define AT91C_TC0_IMR ((AT91_REG *) 0xFFFA002C) // (TC0) Interrupt Mask Register -#define AT91C_TC0_IER ((AT91_REG *) 0xFFFA0024) // (TC0) Interrupt Enable Register -#define AT91C_TC0_RC ((AT91_REG *) 0xFFFA001C) // (TC0) Register C -#define AT91C_TC0_RA ((AT91_REG *) 0xFFFA0014) // (TC0) Register A -#define AT91C_TC0_CMR ((AT91_REG *) 0xFFFA0004) // (TC0) Channel Mode Register -#define AT91C_TC0_IDR ((AT91_REG *) 0xFFFA0028) // (TC0) Interrupt Disable Register -#define AT91C_TC0_SR ((AT91_REG *) 0xFFFA0020) // (TC0) Status Register -#define AT91C_TC0_RB ((AT91_REG *) 0xFFFA0018) // (TC0) Register B -#define AT91C_TC0_CV ((AT91_REG *) 0xFFFA0010) // (TC0) Counter Value -#define AT91C_TC0_CCR ((AT91_REG *) 0xFFFA0000) // (TC0) Channel Control Register -// ========== Register definition for TCB0 peripheral ========== -#define AT91C_TCB0_BMR ((AT91_REG *) 0xFFFA00C4) // (TCB0) TC Block Mode Register -#define AT91C_TCB0_BCR ((AT91_REG *) 0xFFFA00C0) // (TCB0) TC Block Control Register -// ========== Register definition for UHP peripheral ========== -#define AT91C_UHP_HcRhDescriptorA ((AT91_REG *) 0x00300048) // (UHP) Root Hub characteristics A -#define AT91C_UHP_HcRhPortStatus ((AT91_REG *) 0x00300054) // (UHP) Root Hub Port Status Register -#define AT91C_UHP_HcRhDescriptorB ((AT91_REG *) 0x0030004C) // (UHP) Root Hub characteristics B -#define AT91C_UHP_HcControl ((AT91_REG *) 0x00300004) // (UHP) Operating modes for the Host Controller -#define AT91C_UHP_HcInterruptStatus ((AT91_REG *) 0x0030000C) // (UHP) Interrupt Status Register -#define AT91C_UHP_HcRhStatus ((AT91_REG *) 0x00300050) // (UHP) Root Hub Status register -#define AT91C_UHP_HcRevision ((AT91_REG *) 0x00300000) // (UHP) Revision -#define AT91C_UHP_HcCommandStatus ((AT91_REG *) 0x00300008) // (UHP) Command & status Register -#define AT91C_UHP_HcInterruptEnable ((AT91_REG *) 0x00300010) // (UHP) Interrupt Enable Register -#define AT91C_UHP_HcHCCA ((AT91_REG *) 0x00300018) // (UHP) Pointer to the Host Controller Communication Area -#define AT91C_UHP_HcControlHeadED ((AT91_REG *) 0x00300020) // (UHP) First Endpoint Descriptor of the Control list -#define AT91C_UHP_HcInterruptDisable ((AT91_REG *) 0x00300014) // (UHP) Interrupt Disable Register -#define AT91C_UHP_HcPeriodCurrentED ((AT91_REG *) 0x0030001C) // (UHP) Current Isochronous or Interrupt Endpoint Descriptor -#define AT91C_UHP_HcControlCurrentED ((AT91_REG *) 0x00300024) // (UHP) Endpoint Control and Status Register -#define AT91C_UHP_HcBulkCurrentED ((AT91_REG *) 0x0030002C) // (UHP) Current endpoint of the Bulk list -#define AT91C_UHP_HcFmInterval ((AT91_REG *) 0x00300034) // (UHP) Bit time between 2 consecutive SOFs -#define AT91C_UHP_HcBulkHeadED ((AT91_REG *) 0x00300028) // (UHP) First endpoint register of the Bulk list -#define AT91C_UHP_HcBulkDoneHead ((AT91_REG *) 0x00300030) // (UHP) Last completed transfer descriptor -#define AT91C_UHP_HcFmRemaining ((AT91_REG *) 0x00300038) // (UHP) Bit time remaining in the current Frame -#define AT91C_UHP_HcPeriodicStart ((AT91_REG *) 0x00300040) // (UHP) Periodic Start -#define AT91C_UHP_HcLSThreshold ((AT91_REG *) 0x00300044) // (UHP) LS Threshold -#define AT91C_UHP_HcFmNumber ((AT91_REG *) 0x0030003C) // (UHP) Frame number -// ========== Register definition for EMAC peripheral ========== -#define AT91C_EMAC_RSR ((AT91_REG *) 0xFFFBC020) // (EMAC) Receive Status Register -#define AT91C_EMAC_MAN ((AT91_REG *) 0xFFFBC034) // (EMAC) PHY Maintenance Register -#define AT91C_EMAC_HSH ((AT91_REG *) 0xFFFBC090) // (EMAC) Hash Address High[63:32] -#define AT91C_EMAC_MCOL ((AT91_REG *) 0xFFFBC048) // (EMAC) Multiple Collision Frame Register -#define AT91C_EMAC_IER ((AT91_REG *) 0xFFFBC028) // (EMAC) Interrupt Enable Register -#define AT91C_EMAC_SA2H ((AT91_REG *) 0xFFFBC0A4) // (EMAC) Specific Address 2 High, Last 2 bytes -#define AT91C_EMAC_HSL ((AT91_REG *) 0xFFFBC094) // (EMAC) Hash Address Low[31:0] -#define AT91C_EMAC_LCOL ((AT91_REG *) 0xFFFBC05C) // (EMAC) Late Collision Register -#define AT91C_EMAC_OK ((AT91_REG *) 0xFFFBC04C) // (EMAC) Frames Received OK Register -#define AT91C_EMAC_CFG ((AT91_REG *) 0xFFFBC004) // (EMAC) Network Configuration Register -#define AT91C_EMAC_SA3L ((AT91_REG *) 0xFFFBC0A8) // (EMAC) Specific Address 3 Low, First 4 bytes -#define AT91C_EMAC_SEQE ((AT91_REG *) 0xFFFBC050) // (EMAC) Frame Check Sequence Error Register -#define AT91C_EMAC_ECOL ((AT91_REG *) 0xFFFBC060) // (EMAC) Excessive Collision Register -#define AT91C_EMAC_ELR ((AT91_REG *) 0xFFFBC070) // (EMAC) Excessive Length Error Register -#define AT91C_EMAC_SR ((AT91_REG *) 0xFFFBC008) // (EMAC) Network Status Register -#define AT91C_EMAC_RBQP ((AT91_REG *) 0xFFFBC018) // (EMAC) Receive Buffer Queue Pointer -#define AT91C_EMAC_CSE ((AT91_REG *) 0xFFFBC064) // (EMAC) Carrier Sense Error Register -#define AT91C_EMAC_RJB ((AT91_REG *) 0xFFFBC074) // (EMAC) Receive Jabber Register -#define AT91C_EMAC_USF ((AT91_REG *) 0xFFFBC078) // (EMAC) Undersize Frame Register -#define AT91C_EMAC_IDR ((AT91_REG *) 0xFFFBC02C) // (EMAC) Interrupt Disable Register -#define AT91C_EMAC_SA1L ((AT91_REG *) 0xFFFBC098) // (EMAC) Specific Address 1 Low, First 4 bytes -#define AT91C_EMAC_IMR ((AT91_REG *) 0xFFFBC030) // (EMAC) Interrupt Mask Register -#define AT91C_EMAC_FRA ((AT91_REG *) 0xFFFBC040) // (EMAC) Frames Transmitted OK Register -#define AT91C_EMAC_SA3H ((AT91_REG *) 0xFFFBC0AC) // (EMAC) Specific Address 3 High, Last 2 bytes -#define AT91C_EMAC_SA1H ((AT91_REG *) 0xFFFBC09C) // (EMAC) Specific Address 1 High, Last 2 bytes -#define AT91C_EMAC_SCOL ((AT91_REG *) 0xFFFBC044) // (EMAC) Single Collision Frame Register -#define AT91C_EMAC_ALE ((AT91_REG *) 0xFFFBC054) // (EMAC) Alignment Error Register -#define AT91C_EMAC_TAR ((AT91_REG *) 0xFFFBC00C) // (EMAC) Transmit Address Register -#define AT91C_EMAC_SA4L ((AT91_REG *) 0xFFFBC0B0) // (EMAC) Specific Address 4 Low, First 4 bytes -#define AT91C_EMAC_SA2L ((AT91_REG *) 0xFFFBC0A0) // (EMAC) Specific Address 2 Low, First 4 bytes -#define AT91C_EMAC_TUE ((AT91_REG *) 0xFFFBC068) // (EMAC) Transmit Underrun Error Register -#define AT91C_EMAC_DTE ((AT91_REG *) 0xFFFBC058) // (EMAC) Deferred Transmission Frame Register -#define AT91C_EMAC_TCR ((AT91_REG *) 0xFFFBC010) // (EMAC) Transmit Control Register -#define AT91C_EMAC_CTL ((AT91_REG *) 0xFFFBC000) // (EMAC) Network Control Register -#define AT91C_EMAC_SA4H ((AT91_REG *) 0xFFFBC0B4) // (EMAC) Specific Address 4 High, Last 2 bytesr -#define AT91C_EMAC_CDE ((AT91_REG *) 0xFFFBC06C) // (EMAC) Code Error Register -#define AT91C_EMAC_SQEE ((AT91_REG *) 0xFFFBC07C) // (EMAC) SQE Test Error Register -#define AT91C_EMAC_TSR ((AT91_REG *) 0xFFFBC014) // (EMAC) Transmit Status Register -#define AT91C_EMAC_DRFC ((AT91_REG *) 0xFFFBC080) // (EMAC) Discarded RX Frame Register -// ========== Register definition for EBI peripheral ========== -#define AT91C_EBI_CFGR ((AT91_REG *) 0xFFFFFF64) // (EBI) Configuration Register -#define AT91C_EBI_CSA ((AT91_REG *) 0xFFFFFF60) // (EBI) Chip Select Assignment Register -// ========== Register definition for SMC2 peripheral ========== -#define AT91C_SMC2_CSR ((AT91_REG *) 0xFFFFFF70) // (SMC2) SMC2 Chip Select Register -// ========== Register definition for SDRC peripheral ========== -#define AT91C_SDRC_IMR ((AT91_REG *) 0xFFFFFFAC) // (SDRC) SDRAM Controller Interrupt Mask Register -#define AT91C_SDRC_IER ((AT91_REG *) 0xFFFFFFA4) // (SDRC) SDRAM Controller Interrupt Enable Register -#define AT91C_SDRC_SRR ((AT91_REG *) 0xFFFFFF9C) // (SDRC) SDRAM Controller Self Refresh Register -#define AT91C_SDRC_TR ((AT91_REG *) 0xFFFFFF94) // (SDRC) SDRAM Controller Refresh Timer Register -#define AT91C_SDRC_ISR ((AT91_REG *) 0xFFFFFFB0) // (SDRC) SDRAM Controller Interrupt Mask Register -#define AT91C_SDRC_IDR ((AT91_REG *) 0xFFFFFFA8) // (SDRC) SDRAM Controller Interrupt Disable Register -#define AT91C_SDRC_LPR ((AT91_REG *) 0xFFFFFFA0) // (SDRC) SDRAM Controller Low Power Register -#define AT91C_SDRC_CR ((AT91_REG *) 0xFFFFFF98) // (SDRC) SDRAM Controller Configuration Register -#define AT91C_SDRC_MR ((AT91_REG *) 0xFFFFFF90) // (SDRC) SDRAM Controller Mode Register -// ========== Register definition for BFC peripheral ========== -#define AT91C_BFC_MR ((AT91_REG *) 0xFFFFFFC0) // (BFC) BFC Mode Register - -// ***************************************************************************** -// PIO DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_PIO_PA0 ((unsigned int) 1 << 0) // Pin Controlled by PA0 -#define AT91C_PA0_MISO ((unsigned int) AT91C_PIO_PA0) // SPI Master In Slave -#define AT91C_PA0_PCK3 ((unsigned int) AT91C_PIO_PA0) // PMC Programmable Clock Output 3 -#define AT91C_PIO_PA1 ((unsigned int) 1 << 1) // Pin Controlled by PA1 -#define AT91C_PA1_MOSI ((unsigned int) AT91C_PIO_PA1) // SPI Master Out Slave -#define AT91C_PA1_PCK0 ((unsigned int) AT91C_PIO_PA1) // PMC Programmable Clock Output 0 -#define AT91C_PIO_PA10 ((unsigned int) 1 << 10) // Pin Controlled by PA10 -#define AT91C_PA10_ETX1 ((unsigned int) AT91C_PIO_PA10) // Ethernet MAC Transmit Data 1 -#define AT91C_PA10_MCDB1 ((unsigned int) AT91C_PIO_PA10) // Multimedia Card B Data 1 -#define AT91C_PIO_PA11 ((unsigned int) 1 << 11) // Pin Controlled by PA11 -#define AT91C_PA11_ECRS_ECRSDV ((unsigned int) AT91C_PIO_PA11) // Ethernet MAC Carrier Sense/Carrier Sense and Data Valid -#define AT91C_PA11_MCDB2 ((unsigned int) AT91C_PIO_PA11) // Multimedia Card B Data 2 -#define AT91C_PIO_PA12 ((unsigned int) 1 << 12) // Pin Controlled by PA12 -#define AT91C_PA12_ERX0 ((unsigned int) AT91C_PIO_PA12) // Ethernet MAC Receive Data 0 -#define AT91C_PA12_MCDB3 ((unsigned int) AT91C_PIO_PA12) // Multimedia Card B Data 3 -#define AT91C_PIO_PA13 ((unsigned int) 1 << 13) // Pin Controlled by PA13 -#define AT91C_PA13_ERX1 ((unsigned int) AT91C_PIO_PA13) // Ethernet MAC Receive Data 1 -#define AT91C_PA13_TCLK0 ((unsigned int) AT91C_PIO_PA13) // Timer Counter 0 external clock input -#define AT91C_PIO_PA14 ((unsigned int) 1 << 14) // Pin Controlled by PA14 -#define AT91C_PA14_ERXER ((unsigned int) AT91C_PIO_PA14) // Ethernet MAC Receive Error -#define AT91C_PA14_TCLK1 ((unsigned int) AT91C_PIO_PA14) // Timer Counter 1 external clock input -#define AT91C_PIO_PA15 ((unsigned int) 1 << 15) // Pin Controlled by PA15 -#define AT91C_PA15_EMDC ((unsigned int) AT91C_PIO_PA15) // Ethernet MAC Management Data Clock -#define AT91C_PA15_TCLK2 ((unsigned int) AT91C_PIO_PA15) // Timer Counter 2 external clock input -#define AT91C_PIO_PA16 ((unsigned int) 1 << 16) // Pin Controlled by PA16 -#define AT91C_PA16_EMDIO ((unsigned int) AT91C_PIO_PA16) // Ethernet MAC Management Data Input/Output -#define AT91C_PA16_IRQ6 ((unsigned int) AT91C_PIO_PA16) // AIC Interrupt input 6 -#define AT91C_PIO_PA17 ((unsigned int) 1 << 17) // Pin Controlled by PA17 -#define AT91C_PA17_TXD0 ((unsigned int) AT91C_PIO_PA17) // USART 0 Transmit Data -#define AT91C_PA17_TIOA0 ((unsigned int) AT91C_PIO_PA17) // Timer Counter 0 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PA18 ((unsigned int) 1 << 18) // Pin Controlled by PA18 -#define AT91C_PA18_RXD0 ((unsigned int) AT91C_PIO_PA18) // USART 0 Receive Data -#define AT91C_PA18_TIOB0 ((unsigned int) AT91C_PIO_PA18) // Timer Counter 0 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PA19 ((unsigned int) 1 << 19) // Pin Controlled by PA19 -#define AT91C_PA19_SCK0 ((unsigned int) AT91C_PIO_PA19) // USART 0 Serial Clock -#define AT91C_PA19_TIOA1 ((unsigned int) AT91C_PIO_PA19) // Timer Counter 1 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PA2 ((unsigned int) 1 << 2) // Pin Controlled by PA2 -#define AT91C_PA2_SPCK ((unsigned int) AT91C_PIO_PA2) // SPI Serial Clock -#define AT91C_PA2_IRQ4 ((unsigned int) AT91C_PIO_PA2) // AIC Interrupt Input 4 -#define AT91C_PIO_PA20 ((unsigned int) 1 << 20) // Pin Controlled by PA20 -#define AT91C_PA20_CTS0 ((unsigned int) AT91C_PIO_PA20) // USART 0 Clear To Send -#define AT91C_PA20_TIOB1 ((unsigned int) AT91C_PIO_PA20) // Timer Counter 1 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PA21 ((unsigned int) 1 << 21) // Pin Controlled by PA21 -#define AT91C_PA21_RTS0 ((unsigned int) AT91C_PIO_PA21) // Usart 0 Ready To Send -#define AT91C_PA21_TIOA2 ((unsigned int) AT91C_PIO_PA21) // Timer Counter 2 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PA22 ((unsigned int) 1 << 22) // Pin Controlled by PA22 -#define AT91C_PA22_RXD2 ((unsigned int) AT91C_PIO_PA22) // USART 2 Receive Data -#define AT91C_PA22_TIOB2 ((unsigned int) AT91C_PIO_PA22) // Timer Counter 2 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PA23 ((unsigned int) 1 << 23) // Pin Controlled by PA23 -#define AT91C_PA23_TXD2 ((unsigned int) AT91C_PIO_PA23) // USART 2 Transmit Data -#define AT91C_PA23_IRQ3 ((unsigned int) AT91C_PIO_PA23) // Interrupt input 3 -#define AT91C_PIO_PA24 ((unsigned int) 1 << 24) // Pin Controlled by PA24 -#define AT91C_PA24_SCK2 ((unsigned int) AT91C_PIO_PA24) // USART2 Serial Clock -#define AT91C_PA24_PCK1 ((unsigned int) AT91C_PIO_PA24) // PMC Programmable Clock Output 1 -#define AT91C_PIO_PA25 ((unsigned int) 1 << 25) // Pin Controlled by PA25 -#define AT91C_PA25_TWD ((unsigned int) AT91C_PIO_PA25) // TWI Two-wire Serial Data -#define AT91C_PA25_IRQ2 ((unsigned int) AT91C_PIO_PA25) // Interrupt input 2 -#define AT91C_PIO_PA26 ((unsigned int) 1 << 26) // Pin Controlled by PA26 -#define AT91C_PA26_TWCK ((unsigned int) AT91C_PIO_PA26) // TWI Two-wire Serial Clock -#define AT91C_PA26_IRQ1 ((unsigned int) AT91C_PIO_PA26) // Interrupt input 1 -#define AT91C_PIO_PA27 ((unsigned int) 1 << 27) // Pin Controlled by PA27 -#define AT91C_PA27_MCCK ((unsigned int) AT91C_PIO_PA27) // Multimedia Card Clock -#define AT91C_PA27_TCLK3 ((unsigned int) AT91C_PIO_PA27) // Timer Counter 3 External Clock Input -#define AT91C_PIO_PA28 ((unsigned int) 1 << 28) // Pin Controlled by PA28 -#define AT91C_PA28_MCCDA ((unsigned int) AT91C_PIO_PA28) // Multimedia Card A Command -#define AT91C_PA28_TCLK4 ((unsigned int) AT91C_PIO_PA28) // Timer Counter 4 external Clock Input -#define AT91C_PIO_PA29 ((unsigned int) 1 << 29) // Pin Controlled by PA29 -#define AT91C_PA29_MCDA0 ((unsigned int) AT91C_PIO_PA29) // Multimedia Card A Data 0 -#define AT91C_PA29_TCLK5 ((unsigned int) AT91C_PIO_PA29) // Timer Counter 5 external clock input -#define AT91C_PIO_PA3 ((unsigned int) 1 << 3) // Pin Controlled by PA3 -#define AT91C_PA3_NPCS0 ((unsigned int) AT91C_PIO_PA3) // SPI Peripheral Chip Select 0 -#define AT91C_PA3_IRQ5 ((unsigned int) AT91C_PIO_PA3) // AIC Interrupt Input 5 -#define AT91C_PIO_PA30 ((unsigned int) 1 << 30) // Pin Controlled by PA30 -#define AT91C_PA30_DRXD ((unsigned int) AT91C_PIO_PA30) // DBGU Debug Receive Data -#define AT91C_PA30_CTS2 ((unsigned int) AT91C_PIO_PA30) // Usart 2 Clear To Send -#define AT91C_PIO_PA31 ((unsigned int) 1 << 31) // Pin Controlled by PA31 -#define AT91C_PA31_DTXD ((unsigned int) AT91C_PIO_PA31) // DBGU Debug Transmit Data -#define AT91C_PA31_RTS2 ((unsigned int) AT91C_PIO_PA31) // USART 2 Ready To Send -#define AT91C_PIO_PA4 ((unsigned int) 1 << 4) // Pin Controlled by PA4 -#define AT91C_PA4_NPCS1 ((unsigned int) AT91C_PIO_PA4) // SPI Peripheral Chip Select 1 -#define AT91C_PA4_PCK1 ((unsigned int) AT91C_PIO_PA4) // PMC Programmable Clock Output 1 -#define AT91C_PIO_PA5 ((unsigned int) 1 << 5) // Pin Controlled by PA5 -#define AT91C_PA5_NPCS2 ((unsigned int) AT91C_PIO_PA5) // SPI Peripheral Chip Select 2 -#define AT91C_PA5_TXD3 ((unsigned int) AT91C_PIO_PA5) // USART 3 Transmit Data -#define AT91C_PIO_PA6 ((unsigned int) 1 << 6) // Pin Controlled by PA6 -#define AT91C_PA6_NPCS3 ((unsigned int) AT91C_PIO_PA6) // SPI Peripheral Chip Select 3 -#define AT91C_PA6_RXD3 ((unsigned int) AT91C_PIO_PA6) // USART 3 Receive Data -#define AT91C_PIO_PA7 ((unsigned int) 1 << 7) // Pin Controlled by PA7 -#define AT91C_PA7_ETXCK_EREFCK ((unsigned int) AT91C_PIO_PA7) // Ethernet MAC Transmit Clock/Reference Clock -#define AT91C_PA7_PCK2 ((unsigned int) AT91C_PIO_PA7) // PMC Programmable Clock 2 -#define AT91C_PIO_PA8 ((unsigned int) 1 << 8) // Pin Controlled by PA8 -#define AT91C_PA8_ETXEN ((unsigned int) AT91C_PIO_PA8) // Ethernet MAC Transmit Enable -#define AT91C_PA8_MCCDB ((unsigned int) AT91C_PIO_PA8) // Multimedia Card B Command -#define AT91C_PIO_PA9 ((unsigned int) 1 << 9) // Pin Controlled by PA9 -#define AT91C_PA9_ETX0 ((unsigned int) AT91C_PIO_PA9) // Ethernet MAC Transmit Data 0 -#define AT91C_PA9_MCDB0 ((unsigned int) AT91C_PIO_PA9) // Multimedia Card B Data 0 -#define AT91C_PIO_PB0 ((unsigned int) 1 << 0) // Pin Controlled by PB0 -#define AT91C_PB0_TF0 ((unsigned int) AT91C_PIO_PB0) // SSC Transmit Frame Sync 0 -#define AT91C_PB0_TIOB3 ((unsigned int) AT91C_PIO_PB0) // Timer Counter 3 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PB1 ((unsigned int) 1 << 1) // Pin Controlled by PB1 -#define AT91C_PB1_TK0 ((unsigned int) AT91C_PIO_PB1) // SSC Transmit Clock 0 -#define AT91C_PB1_CTS3 ((unsigned int) AT91C_PIO_PB1) // USART 3 Clear To Send -#define AT91C_PIO_PB10 ((unsigned int) 1 << 10) // Pin Controlled by PB10 -#define AT91C_PB10_RK1 ((unsigned int) AT91C_PIO_PB10) // SSC Receive Clock 1 -#define AT91C_PB10_TIOA5 ((unsigned int) AT91C_PIO_PB10) // Timer Counter 5 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PB11 ((unsigned int) 1 << 11) // Pin Controlled by PB11 -#define AT91C_PB11_RF1 ((unsigned int) AT91C_PIO_PB11) // SSC Receive Frame Sync 1 -#define AT91C_PB11_TIOB5 ((unsigned int) AT91C_PIO_PB11) // Timer Counter 5 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PB12 ((unsigned int) 1 << 12) // Pin Controlled by PB12 -#define AT91C_PB12_TF2 ((unsigned int) AT91C_PIO_PB12) // SSC Transmit Frame Sync 2 -#define AT91C_PB12_ETX2 ((unsigned int) AT91C_PIO_PB12) // Ethernet MAC Transmit Data 2 -#define AT91C_PIO_PB13 ((unsigned int) 1 << 13) // Pin Controlled by PB13 -#define AT91C_PB13_TK2 ((unsigned int) AT91C_PIO_PB13) // SSC Transmit Clock 2 -#define AT91C_PB13_ETX3 ((unsigned int) AT91C_PIO_PB13) // Ethernet MAC Transmit Data 3 -#define AT91C_PIO_PB14 ((unsigned int) 1 << 14) // Pin Controlled by PB14 -#define AT91C_PB14_TD2 ((unsigned int) AT91C_PIO_PB14) // SSC Transmit Data 2 -#define AT91C_PB14_ETXER ((unsigned int) AT91C_PIO_PB14) // Ethernet MAC Transmikt Coding Error -#define AT91C_PIO_PB15 ((unsigned int) 1 << 15) // Pin Controlled by PB15 -#define AT91C_PB15_RD2 ((unsigned int) AT91C_PIO_PB15) // SSC Receive Data 2 -#define AT91C_PB15_ERX2 ((unsigned int) AT91C_PIO_PB15) // Ethernet MAC Receive Data 2 -#define AT91C_PIO_PB16 ((unsigned int) 1 << 16) // Pin Controlled by PB16 -#define AT91C_PB16_RK2 ((unsigned int) AT91C_PIO_PB16) // SSC Receive Clock 2 -#define AT91C_PB16_ERX3 ((unsigned int) AT91C_PIO_PB16) // Ethernet MAC Receive Data 3 -#define AT91C_PIO_PB17 ((unsigned int) 1 << 17) // Pin Controlled by PB17 -#define AT91C_PB17_RF2 ((unsigned int) AT91C_PIO_PB17) // SSC Receive Frame Sync 2 -#define AT91C_PB17_ERXDV ((unsigned int) AT91C_PIO_PB17) // Ethernet MAC Receive Data Valid -#define AT91C_PIO_PB18 ((unsigned int) 1 << 18) // Pin Controlled by PB18 -#define AT91C_PB18_RI1 ((unsigned int) AT91C_PIO_PB18) // USART 1 Ring Indicator -#define AT91C_PB18_ECOL ((unsigned int) AT91C_PIO_PB18) // Ethernet MAC Collision Detected -#define AT91C_PIO_PB19 ((unsigned int) 1 << 19) // Pin Controlled by PB19 -#define AT91C_PB19_DTR1 ((unsigned int) AT91C_PIO_PB19) // USART 1 Data Terminal ready -#define AT91C_PB19_ERXCK ((unsigned int) AT91C_PIO_PB19) // Ethernet MAC Receive Clock -#define AT91C_PIO_PB2 ((unsigned int) 1 << 2) // Pin Controlled by PB2 -#define AT91C_PB2_TD0 ((unsigned int) AT91C_PIO_PB2) // SSC Transmit data -#define AT91C_PB2_SCK3 ((unsigned int) AT91C_PIO_PB2) // USART 3 Serial Clock -#define AT91C_PIO_PB20 ((unsigned int) 1 << 20) // Pin Controlled by PB20 -#define AT91C_PB20_TXD1 ((unsigned int) AT91C_PIO_PB20) // USART 1 Transmit Data -#define AT91C_PIO_PB21 ((unsigned int) 1 << 21) // Pin Controlled by PB21 -#define AT91C_PB21_RXD1 ((unsigned int) AT91C_PIO_PB21) // USART 1 Receive Data -#define AT91C_PIO_PB22 ((unsigned int) 1 << 22) // Pin Controlled by PB22 -#define AT91C_PB22_SCK1 ((unsigned int) AT91C_PIO_PB22) // USART1 Serial Clock -#define AT91C_PIO_PB23 ((unsigned int) 1 << 23) // Pin Controlled by PB23 -#define AT91C_PB23_DCD1 ((unsigned int) AT91C_PIO_PB23) // USART 1 Data Carrier Detect -#define AT91C_PIO_PB24 ((unsigned int) 1 << 24) // Pin Controlled by PB24 -#define AT91C_PB24_CTS1 ((unsigned int) AT91C_PIO_PB24) // USART 1 Clear To Send -#define AT91C_PIO_PB25 ((unsigned int) 1 << 25) // Pin Controlled by PB25 -#define AT91C_PB25_DSR1 ((unsigned int) AT91C_PIO_PB25) // USART 1 Data Set ready -#define AT91C_PB25_EF100 ((unsigned int) AT91C_PIO_PB25) // Ethernet MAC Force 100 Mbits/sec -#define AT91C_PIO_PB26 ((unsigned int) 1 << 26) // Pin Controlled by PB26 -#define AT91C_PB26_RTS1 ((unsigned int) AT91C_PIO_PB26) // Usart 0 Ready To Send -#define AT91C_PIO_PB27 ((unsigned int) 1 << 27) // Pin Controlled by PB27 -#define AT91C_PB27_PCK0 ((unsigned int) AT91C_PIO_PB27) // PMC Programmable Clock Output 0 -#define AT91C_PIO_PB28 ((unsigned int) 1 << 28) // Pin Controlled by PB28 -#define AT91C_PB28_FIQ ((unsigned int) AT91C_PIO_PB28) // AIC Fast Interrupt Input -#define AT91C_PIO_PB29 ((unsigned int) 1 << 29) // Pin Controlled by PB29 -#define AT91C_PB29_IRQ0 ((unsigned int) AT91C_PIO_PB29) // Interrupt input 0 -#define AT91C_PIO_PB3 ((unsigned int) 1 << 3) // Pin Controlled by PB3 -#define AT91C_PB3_RD0 ((unsigned int) AT91C_PIO_PB3) // SSC Receive Data -#define AT91C_PB3_MCDA1 ((unsigned int) AT91C_PIO_PB3) // Multimedia Card A Data 1 -#define AT91C_PIO_PB4 ((unsigned int) 1 << 4) // Pin Controlled by PB4 -#define AT91C_PB4_RK0 ((unsigned int) AT91C_PIO_PB4) // SSC Receive Clock -#define AT91C_PB4_MCDA2 ((unsigned int) AT91C_PIO_PB4) // Multimedia Card A Data 2 -#define AT91C_PIO_PB5 ((unsigned int) 1 << 5) // Pin Controlled by PB5 -#define AT91C_PB5_RF0 ((unsigned int) AT91C_PIO_PB5) // SSC Receive Frame Sync 0 -#define AT91C_PB5_MCDA3 ((unsigned int) AT91C_PIO_PB5) // Multimedia Card A Data 3 -#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) // Pin Controlled by PB6 -#define AT91C_PB6_TF1 ((unsigned int) AT91C_PIO_PB6) // SSC Transmit Frame Sync 1 -#define AT91C_PB6_TIOA3 ((unsigned int) AT91C_PIO_PB6) // Timer Counter 4 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PB7 ((unsigned int) 1 << 7) // Pin Controlled by PB7 -#define AT91C_PB7_TK1 ((unsigned int) AT91C_PIO_PB7) // SSC Transmit Clock 1 -#define AT91C_PB7_TIOB3 ((unsigned int) AT91C_PIO_PB7) // Timer Counter 3 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PB8 ((unsigned int) 1 << 8) // Pin Controlled by PB8 -#define AT91C_PB8_TD1 ((unsigned int) AT91C_PIO_PB8) // SSC Transmit Data 1 -#define AT91C_PB8_TIOA4 ((unsigned int) AT91C_PIO_PB8) // Timer Counter 4 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PB9 ((unsigned int) 1 << 9) // Pin Controlled by PB9 -#define AT91C_PB9_RD1 ((unsigned int) AT91C_PIO_PB9) // SSC Receive Data 1 -#define AT91C_PB9_TIOB4 ((unsigned int) AT91C_PIO_PB9) // Timer Counter 4 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PC0 ((unsigned int) 1 << 0) // Pin Controlled by PC0 -#define AT91C_PC0_BFCK ((unsigned int) AT91C_PIO_PC0) // Burst Flash Clock -#define AT91C_PIO_PC1 ((unsigned int) 1 << 1) // Pin Controlled by PC1 -#define AT91C_PC1_BFRDY_SMOE ((unsigned int) AT91C_PIO_PC1) // Burst Flash Ready -#define AT91C_PIO_PC10 ((unsigned int) 1 << 10) // Pin Controlled by PC10 -#define AT91C_PC10_NCS4_CFCS ((unsigned int) AT91C_PIO_PC10) // Compact Flash Chip Select -#define AT91C_PIO_PC11 ((unsigned int) 1 << 11) // Pin Controlled by PC11 -#define AT91C_PC11_NCS5_CFCE1 ((unsigned int) AT91C_PIO_PC11) // Chip Select 5 / Compact Flash Chip Enable 1 -#define AT91C_PIO_PC12 ((unsigned int) 1 << 12) // Pin Controlled by PC12 -#define AT91C_PC12_NCS6_CFCE2 ((unsigned int) AT91C_PIO_PC12) // Chip Select 6 / Compact Flash Chip Enable 2 -#define AT91C_PIO_PC13 ((unsigned int) 1 << 13) // Pin Controlled by PC13 -#define AT91C_PC13_NCS7 ((unsigned int) AT91C_PIO_PC13) // Chip Select 7 -#define AT91C_PIO_PC14 ((unsigned int) 1 << 14) // Pin Controlled by PC14 -#define AT91C_PIO_PC15 ((unsigned int) 1 << 15) // Pin Controlled by PC15 -#define AT91C_PIO_PC16 ((unsigned int) 1 << 16) // Pin Controlled by PC16 -#define AT91C_PC16_D16 ((unsigned int) AT91C_PIO_PC16) // Data Bus [16] -#define AT91C_PIO_PC17 ((unsigned int) 1 << 17) // Pin Controlled by PC17 -#define AT91C_PC17_D17 ((unsigned int) AT91C_PIO_PC17) // Data Bus [17] -#define AT91C_PIO_PC18 ((unsigned int) 1 << 18) // Pin Controlled by PC18 -#define AT91C_PC18_D18 ((unsigned int) AT91C_PIO_PC18) // Data Bus [18] -#define AT91C_PIO_PC19 ((unsigned int) 1 << 19) // Pin Controlled by PC19 -#define AT91C_PC19_D19 ((unsigned int) AT91C_PIO_PC19) // Data Bus [19] -#define AT91C_PIO_PC2 ((unsigned int) 1 << 2) // Pin Controlled by PC2 -#define AT91C_PC2_BFAVD ((unsigned int) AT91C_PIO_PC2) // Burst Flash Address Valid -#define AT91C_PIO_PC20 ((unsigned int) 1 << 20) // Pin Controlled by PC20 -#define AT91C_PC20_D20 ((unsigned int) AT91C_PIO_PC20) // Data Bus [20] -#define AT91C_PIO_PC21 ((unsigned int) 1 << 21) // Pin Controlled by PC21 -#define AT91C_PC21_D21 ((unsigned int) AT91C_PIO_PC21) // Data Bus [21] -#define AT91C_PIO_PC22 ((unsigned int) 1 << 22) // Pin Controlled by PC22 -#define AT91C_PC22_D22 ((unsigned int) AT91C_PIO_PC22) // Data Bus [22] -#define AT91C_PIO_PC23 ((unsigned int) 1 << 23) // Pin Controlled by PC23 -#define AT91C_PC23_D23 ((unsigned int) AT91C_PIO_PC23) // Data Bus [23] -#define AT91C_PIO_PC24 ((unsigned int) 1 << 24) // Pin Controlled by PC24 -#define AT91C_PC24_D24 ((unsigned int) AT91C_PIO_PC24) // Data Bus [24] -#define AT91C_PIO_PC25 ((unsigned int) 1 << 25) // Pin Controlled by PC25 -#define AT91C_PC25_D25 ((unsigned int) AT91C_PIO_PC25) // Data Bus [25] -#define AT91C_PIO_PC26 ((unsigned int) 1 << 26) // Pin Controlled by PC26 -#define AT91C_PC26_D26 ((unsigned int) AT91C_PIO_PC26) // Data Bus [26] -#define AT91C_PIO_PC27 ((unsigned int) 1 << 27) // Pin Controlled by PC27 -#define AT91C_PC27_D27 ((unsigned int) AT91C_PIO_PC27) // Data Bus [27] -#define AT91C_PIO_PC28 ((unsigned int) 1 << 28) // Pin Controlled by PC28 -#define AT91C_PC28_D28 ((unsigned int) AT91C_PIO_PC28) // Data Bus [28] -#define AT91C_PIO_PC29 ((unsigned int) 1 << 29) // Pin Controlled by PC29 -#define AT91C_PC29_D29 ((unsigned int) AT91C_PIO_PC29) // Data Bus [29] -#define AT91C_PIO_PC3 ((unsigned int) 1 << 3) // Pin Controlled by PC3 -#define AT91C_PC3_BFBAA_SMWE ((unsigned int) AT91C_PIO_PC3) // Burst Flash Address Advance / SmartMedia Write Enable -#define AT91C_PIO_PC30 ((unsigned int) 1 << 30) // Pin Controlled by PC30 -#define AT91C_PC30_D30 ((unsigned int) AT91C_PIO_PC30) // Data Bus [30] -#define AT91C_PIO_PC31 ((unsigned int) 1 << 31) // Pin Controlled by PC31 -#define AT91C_PC31_D31 ((unsigned int) AT91C_PIO_PC31) // Data Bus [31] -#define AT91C_PIO_PC4 ((unsigned int) 1 << 4) // Pin Controlled by PC4 -#define AT91C_PC4_BFOE ((unsigned int) AT91C_PIO_PC4) // Burst Flash Output Enable -#define AT91C_PIO_PC5 ((unsigned int) 1 << 5) // Pin Controlled by PC5 -#define AT91C_PC5_BFWE ((unsigned int) AT91C_PIO_PC5) // Burst Flash Write Enable -#define AT91C_PIO_PC6 ((unsigned int) 1 << 6) // Pin Controlled by PC6 -#define AT91C_PC6_NWAIT ((unsigned int) AT91C_PIO_PC6) // NWAIT -#define AT91C_PIO_PC7 ((unsigned int) 1 << 7) // Pin Controlled by PC7 -#define AT91C_PC7_A23 ((unsigned int) AT91C_PIO_PC7) // Address Bus[23] -#define AT91C_PIO_PC8 ((unsigned int) 1 << 8) // Pin Controlled by PC8 -#define AT91C_PC8_A24 ((unsigned int) AT91C_PIO_PC8) // Address Bus[24] -#define AT91C_PIO_PC9 ((unsigned int) 1 << 9) // Pin Controlled by PC9 -#define AT91C_PC9_A25_CFRNW ((unsigned int) AT91C_PIO_PC9) // Address Bus[25] / Compact Flash Read Not Write -#define AT91C_PIO_PD0 ((unsigned int) 1 << 0) // Pin Controlled by PD0 -#define AT91C_PD0_ETX0 ((unsigned int) AT91C_PIO_PD0) // Ethernet MAC Transmit Data 0 -#define AT91C_PIO_PD1 ((unsigned int) 1 << 1) // Pin Controlled by PD1 -#define AT91C_PD1_ETX1 ((unsigned int) AT91C_PIO_PD1) // Ethernet MAC Transmit Data 1 -#define AT91C_PIO_PD10 ((unsigned int) 1 << 10) // Pin Controlled by PD10 -#define AT91C_PD10_PCK3 ((unsigned int) AT91C_PIO_PD10) // PMC Programmable Clock Output 3 -#define AT91C_PD10_TPS1 ((unsigned int) AT91C_PIO_PD10) // ETM ARM9 pipeline status 1 -#define AT91C_PIO_PD11 ((unsigned int) 1 << 11) // Pin Controlled by PD11 -#define AT91C_PD11_ ((unsigned int) AT91C_PIO_PD11) // -#define AT91C_PD11_TPS2 ((unsigned int) AT91C_PIO_PD11) // ETM ARM9 pipeline status 2 -#define AT91C_PIO_PD12 ((unsigned int) 1 << 12) // Pin Controlled by PD12 -#define AT91C_PD12_ ((unsigned int) AT91C_PIO_PD12) // -#define AT91C_PD12_TPK0 ((unsigned int) AT91C_PIO_PD12) // ETM Trace Packet 0 -#define AT91C_PIO_PD13 ((unsigned int) 1 << 13) // Pin Controlled by PD13 -#define AT91C_PD13_ ((unsigned int) AT91C_PIO_PD13) // -#define AT91C_PD13_TPK1 ((unsigned int) AT91C_PIO_PD13) // ETM Trace Packet 1 -#define AT91C_PIO_PD14 ((unsigned int) 1 << 14) // Pin Controlled by PD14 -#define AT91C_PD14_ ((unsigned int) AT91C_PIO_PD14) // -#define AT91C_PD14_TPK2 ((unsigned int) AT91C_PIO_PD14) // ETM Trace Packet 2 -#define AT91C_PIO_PD15 ((unsigned int) 1 << 15) // Pin Controlled by PD15 -#define AT91C_PD15_TD0 ((unsigned int) AT91C_PIO_PD15) // SSC Transmit data -#define AT91C_PD15_TPK3 ((unsigned int) AT91C_PIO_PD15) // ETM Trace Packet 3 -#define AT91C_PIO_PD16 ((unsigned int) 1 << 16) // Pin Controlled by PD16 -#define AT91C_PD16_TD1 ((unsigned int) AT91C_PIO_PD16) // SSC Transmit Data 1 -#define AT91C_PD16_TPK4 ((unsigned int) AT91C_PIO_PD16) // ETM Trace Packet 4 -#define AT91C_PIO_PD17 ((unsigned int) 1 << 17) // Pin Controlled by PD17 -#define AT91C_PD17_TD2 ((unsigned int) AT91C_PIO_PD17) // SSC Transmit Data 2 -#define AT91C_PD17_TPK5 ((unsigned int) AT91C_PIO_PD17) // ETM Trace Packet 5 -#define AT91C_PIO_PD18 ((unsigned int) 1 << 18) // Pin Controlled by PD18 -#define AT91C_PD18_NPCS1 ((unsigned int) AT91C_PIO_PD18) // SPI Peripheral Chip Select 1 -#define AT91C_PD18_TPK6 ((unsigned int) AT91C_PIO_PD18) // ETM Trace Packet 6 -#define AT91C_PIO_PD19 ((unsigned int) 1 << 19) // Pin Controlled by PD19 -#define AT91C_PD19_NPCS2 ((unsigned int) AT91C_PIO_PD19) // SPI Peripheral Chip Select 2 -#define AT91C_PD19_TPK7 ((unsigned int) AT91C_PIO_PD19) // ETM Trace Packet 7 -#define AT91C_PIO_PD2 ((unsigned int) 1 << 2) // Pin Controlled by PD2 -#define AT91C_PD2_ETX2 ((unsigned int) AT91C_PIO_PD2) // Ethernet MAC Transmit Data 2 -#define AT91C_PIO_PD20 ((unsigned int) 1 << 20) // Pin Controlled by PD20 -#define AT91C_PD20_NPCS3 ((unsigned int) AT91C_PIO_PD20) // SPI Peripheral Chip Select 3 -#define AT91C_PD20_TPK8 ((unsigned int) AT91C_PIO_PD20) // ETM Trace Packet 8 -#define AT91C_PIO_PD21 ((unsigned int) 1 << 21) // Pin Controlled by PD21 -#define AT91C_PD21_RTS0 ((unsigned int) AT91C_PIO_PD21) // Usart 0 Ready To Send -#define AT91C_PD21_TPK9 ((unsigned int) AT91C_PIO_PD21) // ETM Trace Packet 9 -#define AT91C_PIO_PD22 ((unsigned int) 1 << 22) // Pin Controlled by PD22 -#define AT91C_PD22_RTS1 ((unsigned int) AT91C_PIO_PD22) // Usart 0 Ready To Send -#define AT91C_PD22_TPK10 ((unsigned int) AT91C_PIO_PD22) // ETM Trace Packet 10 -#define AT91C_PIO_PD23 ((unsigned int) 1 << 23) // Pin Controlled by PD23 -#define AT91C_PD23_RTS2 ((unsigned int) AT91C_PIO_PD23) // USART 2 Ready To Send -#define AT91C_PD23_TPK11 ((unsigned int) AT91C_PIO_PD23) // ETM Trace Packet 11 -#define AT91C_PIO_PD24 ((unsigned int) 1 << 24) // Pin Controlled by PD24 -#define AT91C_PD24_RTS3 ((unsigned int) AT91C_PIO_PD24) // USART 3 Ready To Send -#define AT91C_PD24_TPK12 ((unsigned int) AT91C_PIO_PD24) // ETM Trace Packet 12 -#define AT91C_PIO_PD25 ((unsigned int) 1 << 25) // Pin Controlled by PD25 -#define AT91C_PD25_DTR1 ((unsigned int) AT91C_PIO_PD25) // USART 1 Data Terminal ready -#define AT91C_PD25_TPK13 ((unsigned int) AT91C_PIO_PD25) // ETM Trace Packet 13 -#define AT91C_PIO_PD26 ((unsigned int) 1 << 26) // Pin Controlled by PD26 -#define AT91C_PD26_TPK14 ((unsigned int) AT91C_PIO_PD26) // ETM Trace Packet 14 -#define AT91C_PIO_PD27 ((unsigned int) 1 << 27) // Pin Controlled by PD27 -#define AT91C_PD27_TPK15 ((unsigned int) AT91C_PIO_PD27) // ETM Trace Packet 15 -#define AT91C_PIO_PD3 ((unsigned int) 1 << 3) // Pin Controlled by PD3 -#define AT91C_PD3_ETX3 ((unsigned int) AT91C_PIO_PD3) // Ethernet MAC Transmit Data 3 -#define AT91C_PIO_PD4 ((unsigned int) 1 << 4) // Pin Controlled by PD4 -#define AT91C_PD4_ETXEN ((unsigned int) AT91C_PIO_PD4) // Ethernet MAC Transmit Enable -#define AT91C_PIO_PD5 ((unsigned int) 1 << 5) // Pin Controlled by PD5 -#define AT91C_PD5_ETXER ((unsigned int) AT91C_PIO_PD5) // Ethernet MAC Transmikt Coding Error -#define AT91C_PIO_PD6 ((unsigned int) 1 << 6) // Pin Controlled by PD6 -#define AT91C_PD6_DTXD ((unsigned int) AT91C_PIO_PD6) // DBGU Debug Transmit Data -#define AT91C_PIO_PD7 ((unsigned int) 1 << 7) // Pin Controlled by PD7 -#define AT91C_PD7_PCK0 ((unsigned int) AT91C_PIO_PD7) // PMC Programmable Clock Output 0 -#define AT91C_PD7_TSYNC ((unsigned int) AT91C_PIO_PD7) // ETM Synchronization signal -#define AT91C_PIO_PD8 ((unsigned int) 1 << 8) // Pin Controlled by PD8 -#define AT91C_PD8_PCK1 ((unsigned int) AT91C_PIO_PD8) // PMC Programmable Clock Output 1 -#define AT91C_PD8_TCLK ((unsigned int) AT91C_PIO_PD8) // ETM Trace Clock signal -#define AT91C_PIO_PD9 ((unsigned int) 1 << 9) // Pin Controlled by PD9 -#define AT91C_PD9_PCK2 ((unsigned int) AT91C_PIO_PD9) // PMC Programmable Clock 2 -#define AT91C_PD9_TPS0 ((unsigned int) AT91C_PIO_PD9) // ETM ARM9 pipeline status 0 - -// ***************************************************************************** -// PERIPHERAL ID DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_ID_FIQ ((unsigned int) 0) // Advanced Interrupt Controller (FIQ) -#define AT91C_ID_SYS ((unsigned int) 1) // System Peripheral -#define AT91C_ID_PIOA ((unsigned int) 2) // Parallel IO Controller A -#define AT91C_ID_PIOB ((unsigned int) 3) // Parallel IO Controller B -#define AT91C_ID_PIOC ((unsigned int) 4) // Parallel IO Controller C -#define AT91C_ID_PIOD ((unsigned int) 5) // Parallel IO Controller D -#define AT91C_ID_US0 ((unsigned int) 6) // USART 0 -#define AT91C_ID_US1 ((unsigned int) 7) // USART 1 -#define AT91C_ID_US2 ((unsigned int) 8) // USART 2 -#define AT91C_ID_US3 ((unsigned int) 9) // USART 3 -#define AT91C_ID_MCI ((unsigned int) 10) // Multimedia Card Interface -#define AT91C_ID_UDP ((unsigned int) 11) // USB Device Port -#define AT91C_ID_TWI ((unsigned int) 12) // Two-Wire Interface -#define AT91C_ID_SPI ((unsigned int) 13) // Serial Peripheral Interface -#define AT91C_ID_SSC0 ((unsigned int) 14) // Serial Synchronous Controller 0 -#define AT91C_ID_SSC1 ((unsigned int) 15) // Serial Synchronous Controller 1 -#define AT91C_ID_SSC2 ((unsigned int) 16) // Serial Synchronous Controller 2 -#define AT91C_ID_TC0 ((unsigned int) 17) // Timer Counter 0 -#define AT91C_ID_TC1 ((unsigned int) 18) // Timer Counter 1 -#define AT91C_ID_TC2 ((unsigned int) 19) // Timer Counter 2 -#define AT91C_ID_TC3 ((unsigned int) 20) // Timer Counter 3 -#define AT91C_ID_TC4 ((unsigned int) 21) // Timer Counter 4 -#define AT91C_ID_TC5 ((unsigned int) 22) // Timer Counter 5 -#define AT91C_ID_UHP ((unsigned int) 23) // USB Host port -#define AT91C_ID_EMAC ((unsigned int) 24) // Ethernet MAC -#define AT91C_ID_IRQ0 ((unsigned int) 25) // Advanced Interrupt Controller (IRQ0) -#define AT91C_ID_IRQ1 ((unsigned int) 26) // Advanced Interrupt Controller (IRQ1) -#define AT91C_ID_IRQ2 ((unsigned int) 27) // Advanced Interrupt Controller (IRQ2) -#define AT91C_ID_IRQ3 ((unsigned int) 28) // Advanced Interrupt Controller (IRQ3) -#define AT91C_ID_IRQ4 ((unsigned int) 29) // Advanced Interrupt Controller (IRQ4) -#define AT91C_ID_IRQ5 ((unsigned int) 30) // Advanced Interrupt Controller (IRQ5) -#define AT91C_ID_IRQ6 ((unsigned int) 31) // Advanced Interrupt Controller (IRQ6) - -// ***************************************************************************** -// BASE ADDRESS DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_BASE_SYS ((AT91PS_SYS) 0xFFFFF000) // (SYS) Base Address -#define AT91C_BASE_MC ((AT91PS_MC) 0xFFFFFF00) // (MC) Base Address -#define AT91C_BASE_RTC ((AT91PS_RTC) 0xFFFFFE00) // (RTC) Base Address -#define AT91C_BASE_ST ((AT91PS_ST) 0xFFFFFD00) // (ST) Base Address -#define AT91C_BASE_PMC ((AT91PS_PMC) 0xFFFFFC00) // (PMC) Base Address -#define AT91C_BASE_CKGR ((AT91PS_CKGR) 0xFFFFFC20) // (CKGR) Base Address -#define AT91C_BASE_PIOD ((AT91PS_PIO) 0xFFFFFA00) // (PIOD) Base Address -#define AT91C_BASE_PIOC ((AT91PS_PIO) 0xFFFFF800) // (PIOC) Base Address -#define AT91C_BASE_PIOB ((AT91PS_PIO) 0xFFFFF600) // (PIOB) Base Address -#define AT91C_BASE_PIOA ((AT91PS_PIO) 0xFFFFF400) // (PIOA) Base Address -#define AT91C_BASE_DBGU ((AT91PS_DBGU) 0xFFFFF200) // (DBGU) Base Address -#define AT91C_BASE_PDC_DBGU ((AT91PS_PDC) 0xFFFFF300) // (PDC_DBGU) Base Address -#define AT91C_BASE_AIC ((AT91PS_AIC) 0xFFFFF000) // (AIC) Base Address -#define AT91C_BASE_PDC_SPI ((AT91PS_PDC) 0xFFFE0100) // (PDC_SPI) Base Address -#define AT91C_BASE_SPI ((AT91PS_SPI) 0xFFFE0000) // (SPI) Base Address -#define AT91C_BASE_PDC_SSC2 ((AT91PS_PDC) 0xFFFD8100) // (PDC_SSC2) Base Address -#define AT91C_BASE_SSC2 ((AT91PS_SSC) 0xFFFD8000) // (SSC2) Base Address -#define AT91C_BASE_PDC_SSC1 ((AT91PS_PDC) 0xFFFD4100) // (PDC_SSC1) Base Address -#define AT91C_BASE_SSC1 ((AT91PS_SSC) 0xFFFD4000) // (SSC1) Base Address -#define AT91C_BASE_PDC_SSC0 ((AT91PS_PDC) 0xFFFD0100) // (PDC_SSC0) Base Address -#define AT91C_BASE_SSC0 ((AT91PS_SSC) 0xFFFD0000) // (SSC0) Base Address -#define AT91C_BASE_PDC_US3 ((AT91PS_PDC) 0xFFFCC100) // (PDC_US3) Base Address -#define AT91C_BASE_US3 ((AT91PS_USART) 0xFFFCC000) // (US3) Base Address -#define AT91C_BASE_PDC_US2 ((AT91PS_PDC) 0xFFFC8100) // (PDC_US2) Base Address -#define AT91C_BASE_US2 ((AT91PS_USART) 0xFFFC8000) // (US2) Base Address -#define AT91C_BASE_PDC_US1 ((AT91PS_PDC) 0xFFFC4100) // (PDC_US1) Base Address -#define AT91C_BASE_US1 ((AT91PS_USART) 0xFFFC4000) // (US1) Base Address -#define AT91C_BASE_PDC_US0 ((AT91PS_PDC) 0xFFFC0100) // (PDC_US0) Base Address -#define AT91C_BASE_US0 ((AT91PS_USART) 0xFFFC0000) // (US0) Base Address -#define AT91C_BASE_TWI ((AT91PS_TWI) 0xFFFB8000) // (TWI) Base Address -#define AT91C_BASE_PDC_MCI ((AT91PS_PDC) 0xFFFB4100) // (PDC_MCI) Base Address -#define AT91C_BASE_MCI ((AT91PS_MCI) 0xFFFB4000) // (MCI) Base Address -#define AT91C_BASE_UDP ((AT91PS_UDP) 0xFFFB0000) // (UDP) Base Address -#define AT91C_BASE_TC5 ((AT91PS_TC) 0xFFFA4080) // (TC5) Base Address -#define AT91C_BASE_TC4 ((AT91PS_TC) 0xFFFA4040) // (TC4) Base Address -#define AT91C_BASE_TC3 ((AT91PS_TC) 0xFFFA4000) // (TC3) Base Address -#define AT91C_BASE_TCB1 ((AT91PS_TCB) 0xFFFA4080) // (TCB1) Base Address -#define AT91C_BASE_TC2 ((AT91PS_TC) 0xFFFA0080) // (TC2) Base Address -#define AT91C_BASE_TC1 ((AT91PS_TC) 0xFFFA0040) // (TC1) Base Address -#define AT91C_BASE_TC0 ((AT91PS_TC) 0xFFFA0000) // (TC0) Base Address -#define AT91C_BASE_TCB0 ((AT91PS_TCB) 0xFFFA0000) // (TCB0) Base Address -#define AT91C_BASE_UHP ((AT91PS_UHP) 0x00300000) // (UHP) Base Address -#define AT91C_BASE_EMAC ((AT91PS_EMAC) 0xFFFBC000) // (EMAC) Base Address -#define AT91C_BASE_EBI ((AT91PS_EBI) 0xFFFFFF60) // (EBI) Base Address -#define AT91C_BASE_SMC2 ((AT91PS_SMC2) 0xFFFFFF70) // (SMC2) Base Address -#define AT91C_BASE_SDRC ((AT91PS_SDRC) 0xFFFFFF90) // (SDRC) Base Address -#define AT91C_BASE_BFC ((AT91PS_BFC) 0xFFFFFFC0) // (BFC) Base Address - -// ***************************************************************************** -// MEMORY MAPPING DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_ISRAM ((char *) 0x00200000) // Internal SRAM base address -#define AT91C_ISRAM_SIZE ((unsigned int) 0x00004000) // Internal SRAM size in byte (16 Kbyte) -#define AT91C_IROM ((char *) 0x00100000) // Internal ROM base address -#define AT91C_IROM_SIZE ((unsigned int) 0x00020000) // Internal ROM size in byte (128 Kbyte) - -#endif diff --git a/target/linux/at91/image/dfboot/src/include/AT91RM9200.inc b/target/linux/at91/image/dfboot/src/include/AT91RM9200.inc deleted file mode 100644 index 670e023..0000000 --- a/target/linux/at91/image/dfboot/src/include/AT91RM9200.inc +++ /dev/null @@ -1,2437 +0,0 @@ -;- ---------------------------------------------------------------------------- -;- ATMEL Microcontroller Software Support - ROUSSET - -;- ---------------------------------------------------------------------------- -;- The software is delivered "AS IS" without warranty or condition of any -;- kind, either express, implied or statutory. This includes without -;- limitation any warranty or condition with respect to merchantability or -;- fitness for any particular purpose, or against the infringements of -;- intellectual property rights of others. -;- ---------------------------------------------------------------------------- -;- File Name : AT91RM9200.h -;- Object : AT91RM9200 definitions -;- Generated : AT91 SW Application Group 11/19/2003 (17:20:51) -;- -;- CVS Reference : /AT91RM9200.pl/1.16/Fri Feb 07 10:29:51 2003// -;- CVS Reference : /SYS_AT91RM9200.pl/1.2/Fri Jan 17 12:44:37 2003// -;- CVS Reference : /MC_1760A.pl/1.1/Fri Aug 23 14:38:22 2002// -;- CVS Reference : /AIC_1796B.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// -;- CVS Reference : /PMC_2636A.pl/1.1.1.1/Fri Jun 28 09:36:48 2002// -;- CVS Reference : /ST_1763B.pl/1.1/Fri Aug 23 14:41:42 2002// -;- CVS Reference : /RTC_1245D.pl/1.2/Fri Jan 31 12:19:06 2003// -;- CVS Reference : /PIO_1725D.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// -;- CVS Reference : /DBGU_1754A.pl/1.4/Fri Jan 31 12:18:24 2003// -;- CVS Reference : /UDP_1765B.pl/1.3/Fri Aug 02 14:45:38 2002// -;- CVS Reference : /MCI_1764A.pl/1.2/Thu Nov 14 17:48:24 2002// -;- CVS Reference : /US_1739C.pl/1.2/Fri Jul 12 07:49:25 2002// -;- CVS Reference : /SPI_AT91RMxxxx.pl/1.3/Tue Nov 26 10:20:29 2002// -;- CVS Reference : /SSC_1762A.pl/1.2/Fri Nov 08 13:26:39 2002// -;- CVS Reference : /TC_1753B.pl/1.2/Fri Jan 31 12:19:55 2003// -;- CVS Reference : /TWI_1761B.pl/1.4/Fri Feb 07 10:30:07 2003// -;- CVS Reference : /PDC_1734B.pl/1.2/Thu Nov 21 16:38:23 2002// -;- CVS Reference : /UHP_xxxxA.pl/1.1/Mon Jul 22 12:21:58 2002// -;- CVS Reference : /EMAC_1794A.pl/1.4/Fri Jan 17 12:11:54 2003// -;- CVS Reference : /EBI_1759B.pl/1.10/Fri Jan 17 12:44:29 2003// -;- CVS Reference : /SMC_1783A.pl/1.3/Thu Oct 31 14:38:17 2002// -;- CVS Reference : /SDRC_1758B.pl/1.2/Thu Oct 03 13:04:41 2002// -;- CVS Reference : /BFC_1757B.pl/1.3/Thu Oct 31 14:38:00 2002// -;- ---------------------------------------------------------------------------- - -;- Hardware register definition - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR System Peripherals -;- ***************************************************************************** - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Memory Controller Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_MC -MC_RCR # 4 ;- MC Remap Control Register -MC_ASR # 4 ;- MC Abort Status Register -MC_AASR # 4 ;- MC Abort Address Status Register - # 4 ;- Reserved -MC_PUIA # 64 ;- MC Protection Unit Area -MC_PUP # 4 ;- MC Protection Unit Peripherals -MC_PUER # 4 ;- MC Protection Unit Enable Register -;- -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- -AT91C_MC_RCB EQU (0x1:SHL:0) ;- (MC) Remap Command Bit -;- -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- -AT91C_MC_UNDADD EQU (0x1:SHL:0) ;- (MC) Undefined Addess Abort Status -AT91C_MC_MISADD EQU (0x1:SHL:1) ;- (MC) Misaligned Addess Abort Status -AT91C_MC_MPU EQU (0x1:SHL:2) ;- (MC) Memory protection Unit Abort Status -AT91C_MC_ABTSZ EQU (0x3:SHL:8) ;- (MC) Abort Size Status -AT91C_MC_ABTSZ_BYTE EQU (0x0:SHL:8) ;- (MC) Byte -AT91C_MC_ABTSZ_HWORD EQU (0x1:SHL:8) ;- (MC) Half-word -AT91C_MC_ABTSZ_WORD EQU (0x2:SHL:8) ;- (MC) Word -AT91C_MC_ABTTYP EQU (0x3:SHL:10) ;- (MC) Abort Type Status -AT91C_MC_ABTTYP_DATAR EQU (0x0:SHL:10) ;- (MC) Data Read -AT91C_MC_ABTTYP_DATAW EQU (0x1:SHL:10) ;- (MC) Data Write -AT91C_MC_ABTTYP_FETCH EQU (0x2:SHL:10) ;- (MC) Code Fetch -AT91C_MC_MST0 EQU (0x1:SHL:16) ;- (MC) Master 0 Abort Source -AT91C_MC_MST1 EQU (0x1:SHL:17) ;- (MC) Master 1 Abort Source -AT91C_MC_SVMST0 EQU (0x1:SHL:24) ;- (MC) Saved Master 0 Abort Source -AT91C_MC_SVMST1 EQU (0x1:SHL:25) ;- (MC) Saved Master 1 Abort Source -;- -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area -------- -AT91C_MC_PROT EQU (0x3:SHL:0) ;- (MC) Protection -AT91C_MC_PROT_PNAUNA EQU (0x0) ;- (MC) Privilege: No Access, User: No Access -AT91C_MC_PROT_PRWUNA EQU (0x1) ;- (MC) Privilege: Read/Write, User: No Access -AT91C_MC_PROT_PRWURO EQU (0x2) ;- (MC) Privilege: Read/Write, User: Read Only -AT91C_MC_PROT_PRWURW EQU (0x3) ;- (MC) Privilege: Read/Write, User: Read/Write -AT91C_MC_SIZE EQU (0xF:SHL:4) ;- (MC) Internal Area Size -AT91C_MC_SIZE_1KB EQU (0x0:SHL:4) ;- (MC) Area size 1KByte -AT91C_MC_SIZE_2KB EQU (0x1:SHL:4) ;- (MC) Area size 2KByte -AT91C_MC_SIZE_4KB EQU (0x2:SHL:4) ;- (MC) Area size 4KByte -AT91C_MC_SIZE_8KB EQU (0x3:SHL:4) ;- (MC) Area size 8KByte -AT91C_MC_SIZE_16KB EQU (0x4:SHL:4) ;- (MC) Area size 16KByte -AT91C_MC_SIZE_32KB EQU (0x5:SHL:4) ;- (MC) Area size 32KByte -AT91C_MC_SIZE_64KB EQU (0x6:SHL:4) ;- (MC) Area size 64KByte -AT91C_MC_SIZE_128KB EQU (0x7:SHL:4) ;- (MC) Area size 128KByte -AT91C_MC_SIZE_256KB EQU (0x8:SHL:4) ;- (MC) Area size 256KByte -AT91C_MC_SIZE_512KB EQU (0x9:SHL:4) ;- (MC) Area size 512KByte -AT91C_MC_SIZE_1MB EQU (0xA:SHL:4) ;- (MC) Area size 1MByte -AT91C_MC_SIZE_2MB EQU (0xB:SHL:4) ;- (MC) Area size 2MByte -AT91C_MC_SIZE_4MB EQU (0xC:SHL:4) ;- (MC) Area size 4MByte -AT91C_MC_SIZE_8MB EQU (0xD:SHL:4) ;- (MC) Area size 8MByte -AT91C_MC_SIZE_16MB EQU (0xE:SHL:4) ;- (MC) Area size 16MByte -AT91C_MC_SIZE_64MB EQU (0xF:SHL:4) ;- (MC) Area size 64MByte -AT91C_MC_BA EQU (0x3FFFF:SHL:10) ;- (MC) Internal Area Base Address -;- -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral -------- -;- -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area -------- -AT91C_MC_PUEB EQU (0x1:SHL:0) ;- (MC) Protection Unit enable Bit - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Real-time Clock Alarm and Parallel Load Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_RTC -RTC_CR # 4 ;- Control Register -RTC_MR # 4 ;- Mode Register -RTC_TIMR # 4 ;- Time Register -RTC_CALR # 4 ;- Calendar Register -RTC_TIMALR # 4 ;- Time Alarm Register -RTC_CALALR # 4 ;- Calendar Alarm Register -RTC_SR # 4 ;- Status Register -RTC_SCCR # 4 ;- Status Clear Command Register -RTC_IER # 4 ;- Interrupt Enable Register -RTC_IDR # 4 ;- Interrupt Disable Register -RTC_IMR # 4 ;- Interrupt Mask Register -RTC_VER # 4 ;- Valid Entry Register -;- -------- RTC_CR : (RTC Offset: 0x0) RTC Control Register -------- -AT91C_RTC_UPDTIM EQU (0x1:SHL:0) ;- (RTC) Update Request Time Register -AT91C_RTC_UPDCAL EQU (0x1:SHL:1) ;- (RTC) Update Request Calendar Register -AT91C_RTC_TIMEVSEL EQU (0x3:SHL:8) ;- (RTC) Time Event Selection -AT91C_RTC_TIMEVSEL_MINUTE EQU (0x0:SHL:8) ;- (RTC) Minute change. -AT91C_RTC_TIMEVSEL_HOUR EQU (0x1:SHL:8) ;- (RTC) Hour change. -AT91C_RTC_TIMEVSEL_DAY24 EQU (0x2:SHL:8) ;- (RTC) Every day at midnight. -AT91C_RTC_TIMEVSEL_DAY12 EQU (0x3:SHL:8) ;- (RTC) Every day at noon. -AT91C_RTC_CALEVSEL EQU (0x3:SHL:16) ;- (RTC) Calendar Event Selection -AT91C_RTC_CALEVSEL_WEEK EQU (0x0:SHL:16) ;- (RTC) Week change (every Monday at time 00:00:00). -AT91C_RTC_CALEVSEL_MONTH EQU (0x1:SHL:16) ;- (RTC) Month change (every 01 of each month at time 00:00:00). -AT91C_RTC_CALEVSEL_YEAR EQU (0x2:SHL:16) ;- (RTC) Year change (every January 1 at time 00:00:00). -;- -------- RTC_MR : (RTC Offset: 0x4) RTC Mode Register -------- -AT91C_RTC_HRMOD EQU (0x1:SHL:0) ;- (RTC) 12-24 hour Mode -;- -------- RTC_TIMR : (RTC Offset: 0x8) RTC Time Register -------- -AT91C_RTC_SEC EQU (0x7F:SHL:0) ;- (RTC) Current Second -AT91C_RTC_MIN EQU (0x7F:SHL:8) ;- (RTC) Current Minute -AT91C_RTC_HOUR EQU (0x1F:SHL:16) ;- (RTC) Current Hour -AT91C_RTC_AMPM EQU (0x1:SHL:22) ;- (RTC) Ante Meridiem, Post Meridiem Indicator -;- -------- RTC_CALR : (RTC Offset: 0xc) RTC Calendar Register -------- -AT91C_RTC_CENT EQU (0x3F:SHL:0) ;- (RTC) Current Century -AT91C_RTC_YEAR EQU (0xFF:SHL:8) ;- (RTC) Current Year -AT91C_RTC_MONTH EQU (0x1F:SHL:16) ;- (RTC) Current Month -AT91C_RTC_DAY EQU (0x7:SHL:21) ;- (RTC) Current Day -AT91C_RTC_DATE EQU (0x3F:SHL:24) ;- (RTC) Current Date -;- -------- RTC_TIMALR : (RTC Offset: 0x10) RTC Time Alarm Register -------- -AT91C_RTC_SECEN EQU (0x1:SHL:7) ;- (RTC) Second Alarm Enable -AT91C_RTC_MINEN EQU (0x1:SHL:15) ;- (RTC) Minute Alarm -AT91C_RTC_HOUREN EQU (0x1:SHL:23) ;- (RTC) Current Hour -;- -------- RTC_CALALR : (RTC Offset: 0x14) RTC Calendar Alarm Register -------- -AT91C_RTC_MONTHEN EQU (0x1:SHL:23) ;- (RTC) Month Alarm Enable -AT91C_RTC_DATEEN EQU (0x1:SHL:31) ;- (RTC) Date Alarm Enable -;- -------- RTC_SR : (RTC Offset: 0x18) RTC Status Register -------- -AT91C_RTC_ACKUPD EQU (0x1:SHL:0) ;- (RTC) Acknowledge for Update -AT91C_RTC_ALARM EQU (0x1:SHL:1) ;- (RTC) Alarm Flag -AT91C_RTC_SECEV EQU (0x1:SHL:2) ;- (RTC) Second Event -AT91C_RTC_TIMEV EQU (0x1:SHL:3) ;- (RTC) Time Event -AT91C_RTC_CALEV EQU (0x1:SHL:4) ;- (RTC) Calendar event -;- -------- RTC_SCCR : (RTC Offset: 0x1c) RTC Status Clear Command Register -------- -;- -------- RTC_IER : (RTC Offset: 0x20) RTC Interrupt Enable Register -------- -;- -------- RTC_IDR : (RTC Offset: 0x24) RTC Interrupt Disable Register -------- -;- -------- RTC_IMR : (RTC Offset: 0x28) RTC Interrupt Mask Register -------- -;- -------- RTC_VER : (RTC Offset: 0x2c) RTC Valid Entry Register -------- -AT91C_RTC_NVTIM EQU (0x1:SHL:0) ;- (RTC) Non valid Time -AT91C_RTC_NVCAL EQU (0x1:SHL:1) ;- (RTC) Non valid Calendar -AT91C_RTC_NVTIMALR EQU (0x1:SHL:2) ;- (RTC) Non valid time Alarm -AT91C_RTC_NVCALALR EQU (0x1:SHL:3) ;- (RTC) Nonvalid Calendar Alarm - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR System Timer Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_ST -ST_CR # 4 ;- Control Register -ST_PIMR # 4 ;- Period Interval Mode Register -ST_WDMR # 4 ;- Watchdog Mode Register -ST_RTMR # 4 ;- Real-time Mode Register -ST_SR # 4 ;- Status Register -ST_IER # 4 ;- Interrupt Enable Register -ST_IDR # 4 ;- Interrupt Disable Register -ST_IMR # 4 ;- Interrupt Mask Register -ST_RTAR # 4 ;- Real-time Alarm Register -ST_CRTR # 4 ;- Current Real-time Register -;- -------- ST_CR : (ST Offset: 0x0) System Timer Control Register -------- -AT91C_ST_WDRST EQU (0x1:SHL:0) ;- (ST) Watchdog Timer Restart -;- -------- ST_PIMR : (ST Offset: 0x4) System Timer Period Interval Mode Register -------- -AT91C_ST_PIV EQU (0xFFFF:SHL:0) ;- (ST) Watchdog Timer Restart -;- -------- ST_WDMR : (ST Offset: 0x8) System Timer Watchdog Mode Register -------- -AT91C_ST_WDV EQU (0xFFFF:SHL:0) ;- (ST) Watchdog Timer Restart -AT91C_ST_RSTEN EQU (0x1:SHL:16) ;- (ST) Reset Enable -AT91C_ST_EXTEN EQU (0x1:SHL:17) ;- (ST) External Signal Assertion Enable -;- -------- ST_RTMR : (ST Offset: 0xc) System Timer Real-time Mode Register -------- -AT91C_ST_RTPRES EQU (0xFFFF:SHL:0) ;- (ST) Real-time Timer Prescaler Value -;- -------- ST_SR : (ST Offset: 0x10) System Timer Status Register -------- -AT91C_ST_PITS EQU (0x1:SHL:0) ;- (ST) Period Interval Timer Interrupt -AT91C_ST_WDOVF EQU (0x1:SHL:1) ;- (ST) Watchdog Overflow -AT91C_ST_RTTINC EQU (0x1:SHL:2) ;- (ST) Real-time Timer Increment -AT91C_ST_ALMS EQU (0x1:SHL:3) ;- (ST) Alarm Status -;- -------- ST_IER : (ST Offset: 0x14) System Timer Interrupt Enable Register -------- -;- -------- ST_IDR : (ST Offset: 0x18) System Timer Interrupt Disable Register -------- -;- -------- ST_IMR : (ST Offset: 0x1c) System Timer Interrupt Mask Register -------- -;- -------- ST_RTAR : (ST Offset: 0x20) System Timer Real-time Alarm Register -------- -AT91C_ST_ALMV EQU (0xFFFFF:SHL:0) ;- (ST) Alarm Value Value -;- -------- ST_CRTR : (ST Offset: 0x24) System Timer Current Real-time Register -------- -AT91C_ST_CRTV EQU (0xFFFFF:SHL:0) ;- (ST) Current Real-time Value - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Power Management Controler -;- ***************************************************************************** - ^ 0 ;- AT91S_PMC -PMC_SCER # 4 ;- System Clock Enable Register -PMC_SCDR # 4 ;- System Clock Disable Register -PMC_SCSR # 4 ;- System Clock Status Register - # 4 ;- Reserved -PMC_PCER # 4 ;- Peripheral Clock Enable Register -PMC_PCDR # 4 ;- Peripheral Clock Disable Register -PMC_PCSR # 4 ;- Peripheral Clock Status Register - # 20 ;- Reserved -PMC_MCKR # 4 ;- Master Clock Register - # 12 ;- Reserved -PMC_PCKR # 32 ;- Programmable Clock Register -PMC_IER # 4 ;- Interrupt Enable Register -PMC_IDR # 4 ;- Interrupt Disable Register -PMC_SR # 4 ;- Status Register -PMC_IMR # 4 ;- Interrupt Mask Register -;- -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- -AT91C_PMC_PCK EQU (0x1:SHL:0) ;- (PMC) Processor Clock -AT91C_PMC_UDP EQU (0x1:SHL:1) ;- (PMC) USB Device Port Clock -AT91C_PMC_MCKUDP EQU (0x1:SHL:2) ;- (PMC) USB Device Port Master Clock Automatic Disable on Suspend -AT91C_PMC_UHP EQU (0x1:SHL:4) ;- (PMC) USB Host Port Clock -AT91C_PMC_PCK0 EQU (0x1:SHL:8) ;- (PMC) Programmable Clock Output -AT91C_PMC_PCK1 EQU (0x1:SHL:9) ;- (PMC) Programmable Clock Output -AT91C_PMC_PCK2 EQU (0x1:SHL:10) ;- (PMC) Programmable Clock Output -AT91C_PMC_PCK3 EQU (0x1:SHL:11) ;- (PMC) Programmable Clock Output -AT91C_PMC_PCK4 EQU (0x1:SHL:12) ;- (PMC) Programmable Clock Output -AT91C_PMC_PCK5 EQU (0x1:SHL:13) ;- (PMC) Programmable Clock Output -AT91C_PMC_PCK6 EQU (0x1:SHL:14) ;- (PMC) Programmable Clock Output -AT91C_PMC_PCK7 EQU (0x1:SHL:15) ;- (PMC) Programmable Clock Output -;- -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- -;- -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- -;- -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- -AT91C_PMC_CSS EQU (0x3:SHL:0) ;- (PMC) Programmable Clock Selection -AT91C_PMC_CSS_SLOW_CLK EQU (0x0) ;- (PMC) Slow Clock is selected -AT91C_PMC_CSS_MAIN_CLK EQU (0x1) ;- (PMC) Main Clock is selected -AT91C_PMC_CSS_PLLA_CLK EQU (0x2) ;- (PMC) Clock from PLL A is selected -AT91C_PMC_CSS_PLLB_CLK EQU (0x3) ;- (PMC) Clock from PLL B is selected -AT91C_PMC_PRES EQU (0x7:SHL:2) ;- (PMC) Programmable Clock Prescaler -AT91C_PMC_PRES_CLK EQU (0x0:SHL:2) ;- (PMC) Selected clock -AT91C_PMC_PRES_CLK_2 EQU (0x1:SHL:2) ;- (PMC) Selected clock divided by 2 -AT91C_PMC_PRES_CLK_4 EQU (0x2:SHL:2) ;- (PMC) Selected clock divided by 4 -AT91C_PMC_PRES_CLK_8 EQU (0x3:SHL:2) ;- (PMC) Selected clock divided by 8 -AT91C_PMC_PRES_CLK_16 EQU (0x4:SHL:2) ;- (PMC) Selected clock divided by 16 -AT91C_PMC_PRES_CLK_32 EQU (0x5:SHL:2) ;- (PMC) Selected clock divided by 32 -AT91C_PMC_PRES_CLK_64 EQU (0x6:SHL:2) ;- (PMC) Selected clock divided by 64 -AT91C_PMC_MDIV EQU (0x3:SHL:8) ;- (PMC) Master Clock Division -AT91C_PMC_MDIV_1 EQU (0x0:SHL:8) ;- (PMC) The master clock and the processor clock are the same -AT91C_PMC_MDIV_2 EQU (0x1:SHL:8) ;- (PMC) The processor clock is twice as fast as the master clock -AT91C_PMC_MDIV_3 EQU (0x2:SHL:8) ;- (PMC) The processor clock is three times faster than the master clock -AT91C_PMC_MDIV_4 EQU (0x3:SHL:8) ;- (PMC) The processor clock is four times faster than the master clock -;- -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- -;- -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- -AT91C_PMC_MOSCS EQU (0x1:SHL:0) ;- (PMC) MOSC Status/Enable/Disable/Mask -AT91C_PMC_LOCKA EQU (0x1:SHL:1) ;- (PMC) PLL A Status/Enable/Disable/Mask -AT91C_PMC_LOCKB EQU (0x1:SHL:2) ;- (PMC) PLL B Status/Enable/Disable/Mask -AT91C_PMC_MCKRDY EQU (0x1:SHL:3) ;- (PMC) MCK_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK0RDY EQU (0x1:SHL:8) ;- (PMC) PCK0_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK1RDY EQU (0x1:SHL:9) ;- (PMC) PCK1_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK2RDY EQU (0x1:SHL:10) ;- (PMC) PCK2_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK3RDY EQU (0x1:SHL:11) ;- (PMC) PCK3_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK4RDY EQU (0x1:SHL:12) ;- (PMC) PCK4_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK5RDY EQU (0x1:SHL:13) ;- (PMC) PCK5_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK6RDY EQU (0x1:SHL:14) ;- (PMC) PCK6_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK7RDY EQU (0x1:SHL:15) ;- (PMC) PCK7_RDY Status/Enable/Disable/Mask -;- -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- -;- -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- -;- -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Clock Generator Controler -;- ***************************************************************************** - ^ 0 ;- AT91S_CKGR -CKGR_MOR # 4 ;- Main Oscillator Register -CKGR_MCFR # 4 ;- Main Clock Frequency Register -CKGR_PLLAR # 4 ;- PLL A Register -CKGR_PLLBR # 4 ;- PLL B Register -;- -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- -AT91C_CKGR_MOSCEN EQU (0x1:SHL:0) ;- (CKGR) Main Oscillator Enable -AT91C_CKGR_OSCTEST EQU (0x1:SHL:1) ;- (CKGR) Oscillator Test -AT91C_CKGR_OSCOUNT EQU (0xFF:SHL:8) ;- (CKGR) Main Oscillator Start-up Time -;- -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- -AT91C_CKGR_MAINF EQU (0xFFFF:SHL:0) ;- (CKGR) Main Clock Frequency -AT91C_CKGR_MAINRDY EQU (0x1:SHL:16) ;- (CKGR) Main Clock Ready -;- -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- -AT91C_CKGR_DIVA EQU (0xFF:SHL:0) ;- (CKGR) Divider Selected -AT91C_CKGR_DIVA_0 EQU (0x0) ;- (CKGR) Divider output is 0 -AT91C_CKGR_DIVA_BYPASS EQU (0x1) ;- (CKGR) Divider is bypassed -AT91C_CKGR_PLLACOUNT EQU (0x3F:SHL:8) ;- (CKGR) PLL A Counter -AT91C_CKGR_OUTA EQU (0x3:SHL:14) ;- (CKGR) PLL A Output Frequency Range -AT91C_CKGR_OUTA_0 EQU (0x0:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet -AT91C_CKGR_OUTA_1 EQU (0x1:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet -AT91C_CKGR_OUTA_2 EQU (0x2:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet -AT91C_CKGR_OUTA_3 EQU (0x3:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet -AT91C_CKGR_MULA EQU (0x7FF:SHL:16) ;- (CKGR) PLL A Multiplier -AT91C_CKGR_SRCA EQU (0x1:SHL:29) ;- (CKGR) PLL A Source -;- -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- -AT91C_CKGR_DIVB EQU (0xFF:SHL:0) ;- (CKGR) Divider Selected -AT91C_CKGR_DIVB_0 EQU (0x0) ;- (CKGR) Divider output is 0 -AT91C_CKGR_DIVB_BYPASS EQU (0x1) ;- (CKGR) Divider is bypassed -AT91C_CKGR_PLLBCOUNT EQU (0x3F:SHL:8) ;- (CKGR) PLL B Counter -AT91C_CKGR_OUTB EQU (0x3:SHL:14) ;- (CKGR) PLL B Output Frequency Range -AT91C_CKGR_OUTB_0 EQU (0x0:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet -AT91C_CKGR_OUTB_1 EQU (0x1:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet -AT91C_CKGR_OUTB_2 EQU (0x2:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet -AT91C_CKGR_OUTB_3 EQU (0x3:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet -AT91C_CKGR_MULB EQU (0x7FF:SHL:16) ;- (CKGR) PLL B Multiplier -AT91C_CKGR_USB_96M EQU (0x1:SHL:28) ;- (CKGR) Divider for USB Ports -AT91C_CKGR_USB_PLL EQU (0x1:SHL:29) ;- (CKGR) PLL Use - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Parallel Input Output Controler -;- ***************************************************************************** - ^ 0 ;- AT91S_PIO -PIO_PER # 4 ;- PIO Enable Register -PIO_PDR # 4 ;- PIO Disable Register -PIO_PSR # 4 ;- PIO Status Register - # 4 ;- Reserved -PIO_OER # 4 ;- Output Enable Register -PIO_ODR # 4 ;- Output Disable Registerr -PIO_OSR # 4 ;- Output Status Register - # 4 ;- Reserved -PIO_IFER # 4 ;- Input Filter Enable Register -PIO_IFDR # 4 ;- Input Filter Disable Register -PIO_IFSR # 4 ;- Input Filter Status Register - # 4 ;- Reserved -PIO_SODR # 4 ;- Set Output Data Register -PIO_CODR # 4 ;- Clear Output Data Register -PIO_ODSR # 4 ;- Output Data Status Register -PIO_PDSR # 4 ;- Pin Data Status Register -PIO_IER # 4 ;- Interrupt Enable Register -PIO_IDR # 4 ;- Interrupt Disable Register -PIO_IMR # 4 ;- Interrupt Mask Register -PIO_ISR # 4 ;- Interrupt Status Register -PIO_MDER # 4 ;- Multi-driver Enable Register -PIO_MDDR # 4 ;- Multi-driver Disable Register -PIO_MDSR # 4 ;- Multi-driver Status Register - # 4 ;- Reserved -PIO_PPUDR # 4 ;- Pull-up Disable Register -PIO_PPUER # 4 ;- Pull-up Enable Register -PIO_PPUSR # 4 ;- Pad Pull-up Status Register - # 4 ;- Reserved -PIO_ASR # 4 ;- Select A Register -PIO_BSR # 4 ;- Select B Register -PIO_ABSR # 4 ;- AB Select Status Register - # 36 ;- Reserved -PIO_OWER # 4 ;- Output Write Enable Register -PIO_OWDR # 4 ;- Output Write Disable Register -PIO_OWSR # 4 ;- Output Write Status Register - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Debug Unit -;- ***************************************************************************** - ^ 0 ;- AT91S_DBGU -DBGU_CR # 4 ;- Control Register -DBGU_MR # 4 ;- Mode Register -DBGU_IER # 4 ;- Interrupt Enable Register -DBGU_IDR # 4 ;- Interrupt Disable Register -DBGU_IMR # 4 ;- Interrupt Mask Register -DBGU_CSR # 4 ;- Channel Status Register -DBGU_RHR # 4 ;- Receiver Holding Register -DBGU_THR # 4 ;- Transmitter Holding Register -DBGU_BRGR # 4 ;- Baud Rate Generator Register - # 28 ;- Reserved -DBGU_C1R # 4 ;- Chip ID1 Register -DBGU_C2R # 4 ;- Chip ID2 Register -DBGU_FNTR # 4 ;- Force NTRST Register - # 180 ;- Reserved -DBGU_RPR # 4 ;- Receive Pointer Register -DBGU_RCR # 4 ;- Receive Counter Register -DBGU_TPR # 4 ;- Transmit Pointer Register -DBGU_TCR # 4 ;- Transmit Counter Register -DBGU_RNPR # 4 ;- Receive Next Pointer Register -DBGU_RNCR # 4 ;- Receive Next Counter Register -DBGU_TNPR # 4 ;- Transmit Next Pointer Register -DBGU_TNCR # 4 ;- Transmit Next Counter Register -DBGU_PTCR # 4 ;- PDC Transfer Control Register -DBGU_PTSR # 4 ;- PDC Transfer Status Register -;- -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- -AT91C_US_RSTRX EQU (0x1:SHL:2) ;- (DBGU) Reset Receiver -AT91C_US_RSTTX EQU (0x1:SHL:3) ;- (DBGU) Reset Transmitter -AT91C_US_RXEN EQU (0x1:SHL:4) ;- (DBGU) Receiver Enable -AT91C_US_RXDIS EQU (0x1:SHL:5) ;- (DBGU) Receiver Disable -AT91C_US_TXEN EQU (0x1:SHL:6) ;- (DBGU) Transmitter Enable -AT91C_US_TXDIS EQU (0x1:SHL:7) ;- (DBGU) Transmitter Disable -;- -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- -AT91C_US_PAR EQU (0x7:SHL:9) ;- (DBGU) Parity type -AT91C_US_PAR_EVEN EQU (0x0:SHL:9) ;- (DBGU) Even Parity -AT91C_US_PAR_ODD EQU (0x1:SHL:9) ;- (DBGU) Odd Parity -AT91C_US_PAR_SPACE EQU (0x2:SHL:9) ;- (DBGU) Parity forced to 0 (Space) -AT91C_US_PAR_MARK EQU (0x3:SHL:9) ;- (DBGU) Parity forced to 1 (Mark) -AT91C_US_PAR_NONE EQU (0x4:SHL:9) ;- (DBGU) No Parity -AT91C_US_PAR_MULTI_DROP EQU (0x6:SHL:9) ;- (DBGU) Multi-drop mode -AT91C_US_CHMODE EQU (0x3:SHL:14) ;- (DBGU) Channel Mode -AT91C_US_CHMODE_NORMAL EQU (0x0:SHL:14) ;- (DBGU) Normal Mode: The USART channel operates as an RX/TX USART. -AT91C_US_CHMODE_AUTO EQU (0x1:SHL:14) ;- (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin. -AT91C_US_CHMODE_LOCAL EQU (0x2:SHL:14) ;- (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal. -AT91C_US_CHMODE_REMOTE EQU (0x3:SHL:14) ;- (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin. -;- -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- -AT91C_US_RXRDY EQU (0x1:SHL:0) ;- (DBGU) RXRDY Interrupt -AT91C_US_TXRDY EQU (0x1:SHL:1) ;- (DBGU) TXRDY Interrupt -AT91C_US_ENDRX EQU (0x1:SHL:3) ;- (DBGU) End of Receive Transfer Interrupt -AT91C_US_ENDTX EQU (0x1:SHL:4) ;- (DBGU) End of Transmit Interrupt -AT91C_US_OVRE EQU (0x1:SHL:5) ;- (DBGU) Overrun Interrupt -AT91C_US_FRAME EQU (0x1:SHL:6) ;- (DBGU) Framing Error Interrupt -AT91C_US_PARE EQU (0x1:SHL:7) ;- (DBGU) Parity Error Interrupt -AT91C_US_TXEMPTY EQU (0x1:SHL:9) ;- (DBGU) TXEMPTY Interrupt -AT91C_US_TXBUFE EQU (0x1:SHL:11) ;- (DBGU) TXBUFE Interrupt -AT91C_US_RXBUFF EQU (0x1:SHL:12) ;- (DBGU) RXBUFF Interrupt -AT91C_US_COMM_TX EQU (0x1:SHL:30) ;- (DBGU) COMM_TX Interrupt -AT91C_US_COMM_RX EQU (0x1:SHL:31) ;- (DBGU) COMM_RX Interrupt -;- -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- -;- -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- -;- -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- -;- -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- -AT91C_US_FORCE_NTRST EQU (0x1:SHL:0) ;- (DBGU) Force NTRST in JTAG - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Peripheral Data Controller -;- ***************************************************************************** - ^ 0 ;- AT91S_PDC -PDC_RPR # 4 ;- Receive Pointer Register -PDC_RCR # 4 ;- Receive Counter Register -PDC_TPR # 4 ;- Transmit Pointer Register -PDC_TCR # 4 ;- Transmit Counter Register -PDC_RNPR # 4 ;- Receive Next Pointer Register -PDC_RNCR # 4 ;- Receive Next Counter Register -PDC_TNPR # 4 ;- Transmit Next Pointer Register -PDC_TNCR # 4 ;- Transmit Next Counter Register -PDC_PTCR # 4 ;- PDC Transfer Control Register -PDC_PTSR # 4 ;- PDC Transfer Status Register -;- -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- -AT91C_PDC_RXTEN EQU (0x1:SHL:0) ;- (PDC) Receiver Transfer Enable -AT91C_PDC_RXTDIS EQU (0x1:SHL:1) ;- (PDC) Receiver Transfer Disable -AT91C_PDC_TXTEN EQU (0x1:SHL:8) ;- (PDC) Transmitter Transfer Enable -AT91C_PDC_TXTDIS EQU (0x1:SHL:9) ;- (PDC) Transmitter Transfer Disable -;- -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Advanced Interrupt Controller -;- ***************************************************************************** - ^ 0 ;- AT91S_AIC -AIC_SMR # 128 ;- Source Mode Register -AIC_SVR # 128 ;- Source Vector Register -AIC_IVR # 4 ;- IRQ Vector Register -AIC_FVR # 4 ;- FIQ Vector Register -AIC_ISR # 4 ;- Interrupt Status Register -AIC_IPR # 4 ;- Interrupt Pending Register -AIC_IMR # 4 ;- Interrupt Mask Register -AIC_CISR # 4 ;- Core Interrupt Status Register - # 8 ;- Reserved -AIC_IECR # 4 ;- Interrupt Enable Command Register -AIC_IDCR # 4 ;- Interrupt Disable Command Register -AIC_ICCR # 4 ;- Interrupt Clear Command Register -AIC_ISCR # 4 ;- Interrupt Set Command Register -AIC_EOICR # 4 ;- End of Interrupt Command Register -AIC_SPU # 4 ;- Spurious Vector Register -AIC_DCR # 4 ;- Debug Control Register (Protect) - # 4 ;- Reserved -AIC_FFER # 4 ;- Fast Forcing Enable Register -AIC_FFDR # 4 ;- Fast Forcing Disable Register -AIC_FFSR # 4 ;- Fast Forcing Status Register -;- -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- -AT91C_AIC_PRIOR EQU (0x7:SHL:0) ;- (AIC) Priority Level -AT91C_AIC_PRIOR_LOWEST EQU (0x0) ;- (AIC) Lowest priority level -AT91C_AIC_PRIOR_HIGHEST EQU (0x7) ;- (AIC) Highest priority level -AT91C_AIC_SRCTYPE EQU (0x3:SHL:5) ;- (AIC) Interrupt Source Type -AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE EQU (0x0:SHL:5) ;- (AIC) Internal Sources Code Label Level Sensitive -AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED EQU (0x1:SHL:5) ;- (AIC) Internal Sources Code Label Edge triggered -AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL EQU (0x2:SHL:5) ;- (AIC) External Sources Code Label High-level Sensitive -AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE EQU (0x3:SHL:5) ;- (AIC) External Sources Code Label Positive Edge triggered -;- -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- -AT91C_AIC_NFIQ EQU (0x1:SHL:0) ;- (AIC) NFIQ Status -AT91C_AIC_NIRQ EQU (0x1:SHL:1) ;- (AIC) NIRQ Status -;- -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- -AT91C_AIC_DCR_PROT EQU (0x1:SHL:0) ;- (AIC) Protection Mode -AT91C_AIC_DCR_GMSK EQU (0x1:SHL:1) ;- (AIC) General Mask - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Serial Parallel Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_SPI -SPI_CR # 4 ;- Control Register -SPI_MR # 4 ;- Mode Register -SPI_RDR # 4 ;- Receive Data Register -SPI_TDR # 4 ;- Transmit Data Register -SPI_SR # 4 ;- Status Register -SPI_IER # 4 ;- Interrupt Enable Register -SPI_IDR # 4 ;- Interrupt Disable Register -SPI_IMR # 4 ;- Interrupt Mask Register - # 16 ;- Reserved -SPI_CSR # 16 ;- Chip Select Register - # 192 ;- Reserved -SPI_RPR # 4 ;- Receive Pointer Register -SPI_RCR # 4 ;- Receive Counter Register -SPI_TPR # 4 ;- Transmit Pointer Register -SPI_TCR # 4 ;- Transmit Counter Register -SPI_RNPR # 4 ;- Receive Next Pointer Register -SPI_RNCR # 4 ;- Receive Next Counter Register -SPI_TNPR # 4 ;- Transmit Next Pointer Register -SPI_TNCR # 4 ;- Transmit Next Counter Register -SPI_PTCR # 4 ;- PDC Transfer Control Register -SPI_PTSR # 4 ;- PDC Transfer Status Register -;- -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- -AT91C_SPI_SPIEN EQU (0x1:SHL:0) ;- (SPI) SPI Enable -AT91C_SPI_SPIDIS EQU (0x1:SHL:1) ;- (SPI) SPI Disable -AT91C_SPI_SWRST EQU (0x1:SHL:7) ;- (SPI) SPI Software reset -;- -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- -AT91C_SPI_MSTR EQU (0x1:SHL:0) ;- (SPI) Master/Slave Mode -AT91C_SPI_PS EQU (0x1:SHL:1) ;- (SPI) Peripheral Select -AT91C_SPI_PS_FIXED EQU (0x0:SHL:1) ;- (SPI) Fixed Peripheral Select -AT91C_SPI_PS_VARIABLE EQU (0x1:SHL:1) ;- (SPI) Variable Peripheral Select -AT91C_SPI_PCSDEC EQU (0x1:SHL:2) ;- (SPI) Chip Select Decode -AT91C_SPI_DIV32 EQU (0x1:SHL:3) ;- (SPI) Clock Selection -AT91C_SPI_MODFDIS EQU (0x1:SHL:4) ;- (SPI) Mode Fault Detection -AT91C_SPI_LLB EQU (0x1:SHL:7) ;- (SPI) Clock Selection -AT91C_SPI_PCS EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select -AT91C_SPI_DLYBCS EQU (0xFF:SHL:24) ;- (SPI) Delay Between Chip Selects -;- -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- -AT91C_SPI_RD EQU (0xFFFF:SHL:0) ;- (SPI) Receive Data -AT91C_SPI_RPCS EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select Status -;- -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- -AT91C_SPI_TD EQU (0xFFFF:SHL:0) ;- (SPI) Transmit Data -AT91C_SPI_TPCS EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select Status -;- -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- -AT91C_SPI_RDRF EQU (0x1:SHL:0) ;- (SPI) Receive Data Register Full -AT91C_SPI_TDRE EQU (0x1:SHL:1) ;- (SPI) Transmit Data Register Empty -AT91C_SPI_MODF EQU (0x1:SHL:2) ;- (SPI) Mode Fault Error -AT91C_SPI_OVRES EQU (0x1:SHL:3) ;- (SPI) Overrun Error Status -AT91C_SPI_SPENDRX EQU (0x1:SHL:4) ;- (SPI) End of Receiver Transfer -AT91C_SPI_SPENDTX EQU (0x1:SHL:5) ;- (SPI) End of Receiver Transfer -AT91C_SPI_RXBUFF EQU (0x1:SHL:6) ;- (SPI) RXBUFF Interrupt -AT91C_SPI_TXBUFE EQU (0x1:SHL:7) ;- (SPI) TXBUFE Interrupt -AT91C_SPI_SPIENS EQU (0x1:SHL:16) ;- (SPI) Enable Status -;- -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- -;- -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- -;- -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- -;- -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- -AT91C_SPI_CPOL EQU (0x1:SHL:0) ;- (SPI) Clock Polarity -AT91C_SPI_NCPHA EQU (0x1:SHL:1) ;- (SPI) Clock Phase -AT91C_SPI_BITS EQU (0xF:SHL:4) ;- (SPI) Bits Per Transfer -AT91C_SPI_BITS_8 EQU (0x0:SHL:4) ;- (SPI) 8 Bits Per transfer -AT91C_SPI_BITS_9 EQU (0x1:SHL:4) ;- (SPI) 9 Bits Per transfer -AT91C_SPI_BITS_10 EQU (0x2:SHL:4) ;- (SPI) 10 Bits Per transfer -AT91C_SPI_BITS_11 EQU (0x3:SHL:4) ;- (SPI) 11 Bits Per transfer -AT91C_SPI_BITS_12 EQU (0x4:SHL:4) ;- (SPI) 12 Bits Per transfer -AT91C_SPI_BITS_13 EQU (0x5:SHL:4) ;- (SPI) 13 Bits Per transfer -AT91C_SPI_BITS_14 EQU (0x6:SHL:4) ;- (SPI) 14 Bits Per transfer -AT91C_SPI_BITS_15 EQU (0x7:SHL:4) ;- (SPI) 15 Bits Per transfer -AT91C_SPI_BITS_16 EQU (0x8:SHL:4) ;- (SPI) 16 Bits Per transfer -AT91C_SPI_SCBR EQU (0xFF:SHL:8) ;- (SPI) Serial Clock Baud Rate -AT91C_SPI_DLYBS EQU (0xFF:SHL:16) ;- (SPI) Serial Clock Baud Rate -AT91C_SPI_DLYBCT EQU (0xFF:SHL:24) ;- (SPI) Delay Between Consecutive Transfers - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Synchronous Serial Controller Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_SSC -SSC_CR # 4 ;- Control Register -SSC_CMR # 4 ;- Clock Mode Register - # 8 ;- Reserved -SSC_RCMR # 4 ;- Receive Clock ModeRegister -SSC_RFMR # 4 ;- Receive Frame Mode Register -SSC_TCMR # 4 ;- Transmit Clock Mode Register -SSC_TFMR # 4 ;- Transmit Frame Mode Register -SSC_RHR # 4 ;- Receive Holding Register -SSC_THR # 4 ;- Transmit Holding Register - # 8 ;- Reserved -SSC_RSHR # 4 ;- Receive Sync Holding Register -SSC_TSHR # 4 ;- Transmit Sync Holding Register -SSC_RC0R # 4 ;- Receive Compare 0 Register -SSC_RC1R # 4 ;- Receive Compare 1 Register -SSC_SR # 4 ;- Status Register -SSC_IER # 4 ;- Interrupt Enable Register -SSC_IDR # 4 ;- Interrupt Disable Register -SSC_IMR # 4 ;- Interrupt Mask Register - # 176 ;- Reserved -SSC_RPR # 4 ;- Receive Pointer Register -SSC_RCR # 4 ;- Receive Counter Register -SSC_TPR # 4 ;- Transmit Pointer Register -SSC_TCR # 4 ;- Transmit Counter Register -SSC_RNPR # 4 ;- Receive Next Pointer Register -SSC_RNCR # 4 ;- Receive Next Counter Register -SSC_TNPR # 4 ;- Transmit Next Pointer Register -SSC_TNCR # 4 ;- Transmit Next Counter Register -SSC_PTCR # 4 ;- PDC Transfer Control Register -SSC_PTSR # 4 ;- PDC Transfer Status Register -;- -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- -AT91C_SSC_RXEN EQU (0x1:SHL:0) ;- (SSC) Receive Enable -AT91C_SSC_RXDIS EQU (0x1:SHL:1) ;- (SSC) Receive Disable -AT91C_SSC_TXEN EQU (0x1:SHL:8) ;- (SSC) Transmit Enable -AT91C_SSC_TXDIS EQU (0x1:SHL:9) ;- (SSC) Transmit Disable -AT91C_SSC_SWRST EQU (0x1:SHL:15) ;- (SSC) Software Reset -;- -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- -AT91C_SSC_CKS EQU (0x3:SHL:0) ;- (SSC) Receive/Transmit Clock Selection -AT91C_SSC_CKS_DIV EQU (0x0) ;- (SSC) Divided Clock -AT91C_SSC_CKS_TK EQU (0x1) ;- (SSC) TK Clock signal -AT91C_SSC_CKS_RK EQU (0x2) ;- (SSC) RK pin -AT91C_SSC_CKO EQU (0x7:SHL:2) ;- (SSC) Receive/Transmit Clock Output Mode Selection -AT91C_SSC_CKO_NONE EQU (0x0:SHL:2) ;- (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only -AT91C_SSC_CKO_CONTINOUS EQU (0x1:SHL:2) ;- (SSC) Continuous Receive/Transmit Clock RK pin: Output -AT91C_SSC_CKO_DATA_TX EQU (0x2:SHL:2) ;- (SSC) Receive/Transmit Clock only during data transfers RK pin: Output -AT91C_SSC_CKI EQU (0x1:SHL:5) ;- (SSC) Receive/Transmit Clock Inversion -AT91C_SSC_CKG EQU (0x3:SHL:6) ;- (SSC) Receive/Transmit Clock Gating Selection -AT91C_SSC_CKG_NONE EQU (0x0:SHL:6) ;- (SSC) Receive/Transmit Clock Gating: None, continuous clock -AT91C_SSC_CKG_LOW EQU (0x1:SHL:6) ;- (SSC) Receive/Transmit Clock enabled only if RF Low -AT91C_SSC_CKG_HIGH EQU (0x2:SHL:6) ;- (SSC) Receive/Transmit Clock enabled only if RF High -AT91C_SSC_START EQU (0xF:SHL:8) ;- (SSC) Receive/Transmit Start Selection -AT91C_SSC_START_CONTINOUS EQU (0x0:SHL:8) ;- (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data. -AT91C_SSC_START_TX EQU (0x1:SHL:8) ;- (SSC) Transmit/Receive start -AT91C_SSC_START_LOW_RF EQU (0x2:SHL:8) ;- (SSC) Detection of a low level on RF input -AT91C_SSC_START_HIGH_RF EQU (0x3:SHL:8) ;- (SSC) Detection of a high level on RF input -AT91C_SSC_START_FALL_RF EQU (0x4:SHL:8) ;- (SSC) Detection of a falling edge on RF input -AT91C_SSC_START_RISE_RF EQU (0x5:SHL:8) ;- (SSC) Detection of a rising edge on RF input -AT91C_SSC_START_LEVEL_RF EQU (0x6:SHL:8) ;- (SSC) Detection of any level change on RF input -AT91C_SSC_START_EDGE_RF EQU (0x7:SHL:8) ;- (SSC) Detection of any edge on RF input -AT91C_SSC_START_0 EQU (0x8:SHL:8) ;- (SSC) Compare 0 -AT91C_SSC_STOP EQU (0x1:SHL:12) ;- (SSC) Receive Stop Selection -AT91C_SSC_STTOUT EQU (0x1:SHL:15) ;- (SSC) Receive/Transmit Start Output Selection -AT91C_SSC_STTDLY EQU (0xFF:SHL:16) ;- (SSC) Receive/Transmit Start Delay -AT91C_SSC_PERIOD EQU (0xFF:SHL:24) ;- (SSC) Receive/Transmit Period Divider Selection -;- -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- -AT91C_SSC_DATLEN EQU (0x1F:SHL:0) ;- (SSC) Data Length -AT91C_SSC_LOOP EQU (0x1:SHL:5) ;- (SSC) Loop Mode -AT91C_SSC_MSBF EQU (0x1:SHL:7) ;- (SSC) Most Significant Bit First -AT91C_SSC_DATNB EQU (0xF:SHL:8) ;- (SSC) Data Number per Frame -AT91C_SSC_FSLEN EQU (0xF:SHL:16) ;- (SSC) Receive/Transmit Frame Sync length -AT91C_SSC_FSOS EQU (0x7:SHL:20) ;- (SSC) Receive/Transmit Frame Sync Output Selection -AT91C_SSC_FSOS_NONE EQU (0x0:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only -AT91C_SSC_FSOS_NEGATIVE EQU (0x1:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse -AT91C_SSC_FSOS_POSITIVE EQU (0x2:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse -AT91C_SSC_FSOS_LOW EQU (0x3:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer -AT91C_SSC_FSOS_HIGH EQU (0x4:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer -AT91C_SSC_FSOS_TOGGLE EQU (0x5:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer -AT91C_SSC_FSEDGE EQU (0x1:SHL:24) ;- (SSC) Frame Sync Edge Detection -;- -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- -;- -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- -AT91C_SSC_DATDEF EQU (0x1:SHL:5) ;- (SSC) Data Default Value -AT91C_SSC_FSDEN EQU (0x1:SHL:23) ;- (SSC) Frame Sync Data Enable -;- -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- -AT91C_SSC_TXRDY EQU (0x1:SHL:0) ;- (SSC) Transmit Ready -AT91C_SSC_TXEMPTY EQU (0x1:SHL:1) ;- (SSC) Transmit Empty -AT91C_SSC_ENDTX EQU (0x1:SHL:2) ;- (SSC) End Of Transmission -AT91C_SSC_TXBUFE EQU (0x1:SHL:3) ;- (SSC) Transmit Buffer Empty -AT91C_SSC_RXRDY EQU (0x1:SHL:4) ;- (SSC) Receive Ready -AT91C_SSC_OVRUN EQU (0x1:SHL:5) ;- (SSC) Receive Overrun -AT91C_SSC_ENDRX EQU (0x1:SHL:6) ;- (SSC) End of Reception -AT91C_SSC_RXBUFF EQU (0x1:SHL:7) ;- (SSC) Receive Buffer Full -AT91C_SSC_CP0 EQU (0x1:SHL:8) ;- (SSC) Compare 0 -AT91C_SSC_CP1 EQU (0x1:SHL:9) ;- (SSC) Compare 1 -AT91C_SSC_TXSYN EQU (0x1:SHL:10) ;- (SSC) Transmit Sync -AT91C_SSC_RXSYN EQU (0x1:SHL:11) ;- (SSC) Receive Sync -AT91C_SSC_TXENA EQU (0x1:SHL:16) ;- (SSC) Transmit Enable -AT91C_SSC_RXENA EQU (0x1:SHL:17) ;- (SSC) Receive Enable -;- -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- -;- -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- -;- -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Usart -;- ***************************************************************************** - ^ 0 ;- AT91S_USART -US_CR # 4 ;- Control Register -US_MR # 4 ;- Mode Register -US_IER # 4 ;- Interrupt Enable Register -US_IDR # 4 ;- Interrupt Disable Register -US_IMR # 4 ;- Interrupt Mask Register -US_CSR # 4 ;- Channel Status Register -US_RHR # 4 ;- Receiver Holding Register -US_THR # 4 ;- Transmitter Holding Register -US_BRGR # 4 ;- Baud Rate Generator Register -US_RTOR # 4 ;- Receiver Time-out Register -US_TTGR # 4 ;- Transmitter Time-guard Register - # 20 ;- Reserved -US_FIDI # 4 ;- FI_DI_Ratio Register -US_NER # 4 ;- Nb Errors Register -US_XXR # 4 ;- XON_XOFF Register -US_IF # 4 ;- IRDA_FILTER Register - # 176 ;- Reserved -US_RPR # 4 ;- Receive Pointer Register -US_RCR # 4 ;- Receive Counter Register -US_TPR # 4 ;- Transmit Pointer Register -US_TCR # 4 ;- Transmit Counter Register -US_RNPR # 4 ;- Receive Next Pointer Register -US_RNCR # 4 ;- Receive Next Counter Register -US_TNPR # 4 ;- Transmit Next Pointer Register -US_TNCR # 4 ;- Transmit Next Counter Register -US_PTCR # 4 ;- PDC Transfer Control Register -US_PTSR # 4 ;- PDC Transfer Status Register -;- -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- -AT91C_US_RSTSTA EQU (0x1:SHL:8) ;- (USART) Reset Status Bits -AT91C_US_STTBRK EQU (0x1:SHL:9) ;- (USART) Start Break -AT91C_US_STPBRK EQU (0x1:SHL:10) ;- (USART) Stop Break -AT91C_US_STTTO EQU (0x1:SHL:11) ;- (USART) Start Time-out -AT91C_US_SENDA EQU (0x1:SHL:12) ;- (USART) Send Address -AT91C_US_RSTIT EQU (0x1:SHL:13) ;- (USART) Reset Iterations -AT91C_US_RSTNACK EQU (0x1:SHL:14) ;- (USART) Reset Non Acknowledge -AT91C_US_RETTO EQU (0x1:SHL:15) ;- (USART) Rearm Time-out -AT91C_US_DTREN EQU (0x1:SHL:16) ;- (USART) Data Terminal ready Enable -AT91C_US_DTRDIS EQU (0x1:SHL:17) ;- (USART) Data Terminal ready Disable -AT91C_US_RTSEN EQU (0x1:SHL:18) ;- (USART) Request to Send enable -AT91C_US_RTSDIS EQU (0x1:SHL:19) ;- (USART) Request to Send Disable -;- -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- -AT91C_US_USMODE EQU (0xF:SHL:0) ;- (USART) Usart mode -AT91C_US_USMODE_NORMAL EQU (0x0) ;- (USART) Normal -AT91C_US_USMODE_RS485 EQU (0x1) ;- (USART) RS485 -AT91C_US_USMODE_HWHSH EQU (0x2) ;- (USART) Hardware Handshaking -AT91C_US_USMODE_MODEM EQU (0x3) ;- (USART) Modem -AT91C_US_USMODE_ISO7816_0 EQU (0x4) ;- (USART) ISO7816 protocol: T = 0 -AT91C_US_USMODE_ISO7816_1 EQU (0x6) ;- (USART) ISO7816 protocol: T = 1 -AT91C_US_USMODE_IRDA EQU (0x8) ;- (USART) IrDA -AT91C_US_USMODE_SWHSH EQU (0xC) ;- (USART) Software Handshaking -AT91C_US_CLKS EQU (0x3:SHL:4) ;- (USART) Clock Selection (Baud Rate generator Input Clock -AT91C_US_CLKS_CLOCK EQU (0x0:SHL:4) ;- (USART) Clock -AT91C_US_CLKS_FDIV1 EQU (0x1:SHL:4) ;- (USART) fdiv1 -AT91C_US_CLKS_SLOW EQU (0x2:SHL:4) ;- (USART) slow_clock (ARM) -AT91C_US_CLKS_EXT EQU (0x3:SHL:4) ;- (USART) External (SCK) -AT91C_US_CHRL EQU (0x3:SHL:6) ;- (USART) Clock Selection (Baud Rate generator Input Clock -AT91C_US_CHRL_5_BITS EQU (0x0:SHL:6) ;- (USART) Character Length: 5 bits -AT91C_US_CHRL_6_BITS EQU (0x1:SHL:6) ;- (USART) Character Length: 6 bits -AT91C_US_CHRL_7_BITS EQU (0x2:SHL:6) ;- (USART) Character Length: 7 bits -AT91C_US_CHRL_8_BITS EQU (0x3:SHL:6) ;- (USART) Character Length: 8 bits -AT91C_US_SYNC EQU (0x1:SHL:8) ;- (USART) Synchronous Mode Select -AT91C_US_NBSTOP EQU (0x3:SHL:12) ;- (USART) Number of Stop bits -AT91C_US_NBSTOP_1_BIT EQU (0x0:SHL:12) ;- (USART) 1 stop bit -AT91C_US_NBSTOP_15_BIT EQU (0x1:SHL:12) ;- (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits -AT91C_US_NBSTOP_2_BIT EQU (0x2:SHL:12) ;- (USART) 2 stop bits -AT91C_US_MSBF EQU (0x1:SHL:16) ;- (USART) Bit Order -AT91C_US_MODE9 EQU (0x1:SHL:17) ;- (USART) 9-bit Character length -AT91C_US_CKLO EQU (0x1:SHL:18) ;- (USART) Clock Output Select -AT91C_US_OVER EQU (0x1:SHL:19) ;- (USART) Over Sampling Mode -AT91C_US_INACK EQU (0x1:SHL:20) ;- (USART) Inhibit Non Acknowledge -AT91C_US_DSNACK EQU (0x1:SHL:21) ;- (USART) Disable Successive NACK -AT91C_US_MAX_ITER EQU (0x1:SHL:24) ;- (USART) Number of Repetitions -AT91C_US_FILTER EQU (0x1:SHL:28) ;- (USART) Receive Line Filter -;- -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- -AT91C_US_RXBRK EQU (0x1:SHL:2) ;- (USART) Break Received/End of Break -AT91C_US_TIMEOUT EQU (0x1:SHL:8) ;- (USART) Receiver Time-out -AT91C_US_ITERATION EQU (0x1:SHL:10) ;- (USART) Max number of Repetitions Reached -AT91C_US_NACK EQU (0x1:SHL:13) ;- (USART) Non Acknowledge -AT91C_US_RIIC EQU (0x1:SHL:16) ;- (USART) Ring INdicator Input Change Flag -AT91C_US_DSRIC EQU (0x1:SHL:17) ;- (USART) Data Set Ready Input Change Flag -AT91C_US_DCDIC EQU (0x1:SHL:18) ;- (USART) Data Carrier Flag -AT91C_US_CTSIC EQU (0x1:SHL:19) ;- (USART) Clear To Send Input Change Flag -;- -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- -;- -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- -;- -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- -AT91C_US_RI EQU (0x1:SHL:20) ;- (USART) Image of RI Input -AT91C_US_DSR EQU (0x1:SHL:21) ;- (USART) Image of DSR Input -AT91C_US_DCD EQU (0x1:SHL:22) ;- (USART) Image of DCD Input -AT91C_US_CTS EQU (0x1:SHL:23) ;- (USART) Image of CTS Input - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Two-wire Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_TWI -TWI_CR # 4 ;- Control Register -TWI_MMR # 4 ;- Master Mode Register -TWI_SMR # 4 ;- Slave Mode Register -TWI_IADR # 4 ;- Internal Address Register -TWI_CWGR # 4 ;- Clock Waveform Generator Register - # 12 ;- Reserved -TWI_SR # 4 ;- Status Register -TWI_IER # 4 ;- Interrupt Enable Register -TWI_IDR # 4 ;- Interrupt Disable Register -TWI_IMR # 4 ;- Interrupt Mask Register -TWI_RHR # 4 ;- Receive Holding Register -TWI_THR # 4 ;- Transmit Holding Register -;- -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- -AT91C_TWI_START EQU (0x1:SHL:0) ;- (TWI) Send a START Condition -AT91C_TWI_STOP EQU (0x1:SHL:1) ;- (TWI) Send a STOP Condition -AT91C_TWI_MSEN EQU (0x1:SHL:2) ;- (TWI) TWI Master Transfer Enabled -AT91C_TWI_MSDIS EQU (0x1:SHL:3) ;- (TWI) TWI Master Transfer Disabled -AT91C_TWI_SVEN EQU (0x1:SHL:4) ;- (TWI) TWI Slave Transfer Enabled -AT91C_TWI_SVDIS EQU (0x1:SHL:5) ;- (TWI) TWI Slave Transfer Disabled -AT91C_TWI_SWRST EQU (0x1:SHL:7) ;- (TWI) Software Reset -;- -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- -AT91C_TWI_IADRSZ EQU (0x3:SHL:8) ;- (TWI) Internal Device Address Size -AT91C_TWI_IADRSZ_NO EQU (0x0:SHL:8) ;- (TWI) No internal device address -AT91C_TWI_IADRSZ_1_BYTE EQU (0x1:SHL:8) ;- (TWI) One-byte internal device address -AT91C_TWI_IADRSZ_2_BYTE EQU (0x2:SHL:8) ;- (TWI) Two-byte internal device address -AT91C_TWI_IADRSZ_3_BYTE EQU (0x3:SHL:8) ;- (TWI) Three-byte internal device address -AT91C_TWI_MREAD EQU (0x1:SHL:12) ;- (TWI) Master Read Direction -AT91C_TWI_DADR EQU (0x7F:SHL:16) ;- (TWI) Device Address -;- -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- -AT91C_TWI_SADR EQU (0x7F:SHL:16) ;- (TWI) Slave Device Address -;- -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- -AT91C_TWI_CLDIV EQU (0xFF:SHL:0) ;- (TWI) Clock Low Divider -AT91C_TWI_CHDIV EQU (0xFF:SHL:8) ;- (TWI) Clock High Divider -AT91C_TWI_CKDIV EQU (0x7:SHL:16) ;- (TWI) Clock Divider -;- -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- -AT91C_TWI_TXCOMP EQU (0x1:SHL:0) ;- (TWI) Transmission Completed -AT91C_TWI_RXRDY EQU (0x1:SHL:1) ;- (TWI) Receive holding register ReaDY -AT91C_TWI_TXRDY EQU (0x1:SHL:2) ;- (TWI) Transmit holding register ReaDY -AT91C_TWI_SVREAD EQU (0x1:SHL:3) ;- (TWI) Slave Read -AT91C_TWI_SVACC EQU (0x1:SHL:4) ;- (TWI) Slave Access -AT91C_TWI_GCACC EQU (0x1:SHL:5) ;- (TWI) General Call Access -AT91C_TWI_OVRE EQU (0x1:SHL:6) ;- (TWI) Overrun Error -AT91C_TWI_UNRE EQU (0x1:SHL:7) ;- (TWI) Underrun Error -AT91C_TWI_NACK EQU (0x1:SHL:8) ;- (TWI) Not Acknowledged -AT91C_TWI_ARBLST EQU (0x1:SHL:9) ;- (TWI) Arbitration Lost -;- -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- -;- -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- -;- -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Multimedia Card Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_MCI -MCI_CR # 4 ;- MCI Control Register -MCI_MR # 4 ;- MCI Mode Register -MCI_DTOR # 4 ;- MCI Data Timeout Register -MCI_SDCR # 4 ;- MCI SD Card Register -MCI_ARGR # 4 ;- MCI Argument Register -MCI_CMDR # 4 ;- MCI Command Register - # 8 ;- Reserved -MCI_RSPR # 16 ;- MCI Response Register -MCI_RDR # 4 ;- MCI Receive Data Register -MCI_TDR # 4 ;- MCI Transmit Data Register - # 8 ;- Reserved -MCI_SR # 4 ;- MCI Status Register -MCI_IER # 4 ;- MCI Interrupt Enable Register -MCI_IDR # 4 ;- MCI Interrupt Disable Register -MCI_IMR # 4 ;- MCI Interrupt Mask Register - # 176 ;- Reserved -MCI_RPR # 4 ;- Receive Pointer Register -MCI_RCR # 4 ;- Receive Counter Register -MCI_TPR # 4 ;- Transmit Pointer Register -MCI_TCR # 4 ;- Transmit Counter Register -MCI_RNPR # 4 ;- Receive Next Pointer Register -MCI_RNCR # 4 ;- Receive Next Counter Register -MCI_TNPR # 4 ;- Transmit Next Pointer Register -MCI_TNCR # 4 ;- Transmit Next Counter Register -MCI_PTCR # 4 ;- PDC Transfer Control Register -MCI_PTSR # 4 ;- PDC Transfer Status Register -;- -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- -AT91C_MCI_MCIEN EQU (0x1:SHL:0) ;- (MCI) Multimedia Interface Enable -AT91C_MCI_MCIDIS EQU (0x1:SHL:1) ;- (MCI) Multimedia Interface Disable -AT91C_MCI_PWSEN EQU (0x1:SHL:2) ;- (MCI) Power Save Mode Enable -AT91C_MCI_PWSDIS EQU (0x1:SHL:3) ;- (MCI) Power Save Mode Disable -;- -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- -AT91C_MCI_CLKDIV EQU (0x1:SHL:0) ;- (MCI) Clock Divider -AT91C_MCI_PWSDIV EQU (0x1:SHL:8) ;- (MCI) Power Saving Divider -AT91C_MCI_PDCPADV EQU (0x1:SHL:14) ;- (MCI) PDC Padding Value -AT91C_MCI_PDCMODE EQU (0x1:SHL:15) ;- (MCI) PDC Oriented Mode -AT91C_MCI_BLKLEN EQU (0x1:SHL:18) ;- (MCI) Data Block Length -;- -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- -AT91C_MCI_DTOCYC EQU (0x1:SHL:0) ;- (MCI) Data Timeout Cycle Number -AT91C_MCI_DTOMUL EQU (0x7:SHL:4) ;- (MCI) Data Timeout Multiplier -AT91C_MCI_DTOMUL_1 EQU (0x0:SHL:4) ;- (MCI) DTOCYC x 1 -AT91C_MCI_DTOMUL_16 EQU (0x1:SHL:4) ;- (MCI) DTOCYC x 16 -AT91C_MCI_DTOMUL_128 EQU (0x2:SHL:4) ;- (MCI) DTOCYC x 128 -AT91C_MCI_DTOMUL_256 EQU (0x3:SHL:4) ;- (MCI) DTOCYC x 256 -AT91C_MCI_DTOMUL_1024 EQU (0x4:SHL:4) ;- (MCI) DTOCYC x 1024 -AT91C_MCI_DTOMUL_4096 EQU (0x5:SHL:4) ;- (MCI) DTOCYC x 4096 -AT91C_MCI_DTOMUL_65536 EQU (0x6:SHL:4) ;- (MCI) DTOCYC x 65536 -AT91C_MCI_DTOMUL_1048576 EQU (0x7:SHL:4) ;- (MCI) DTOCYC x 1048576 -;- -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- -AT91C_MCI_SCDSEL EQU (0x1:SHL:0) ;- (MCI) SD Card Selector -AT91C_MCI_SCDBUS EQU (0x1:SHL:7) ;- (MCI) SD Card Bus Width -;- -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- -AT91C_MCI_CMDNB EQU (0x1F:SHL:0) ;- (MCI) Command Number -AT91C_MCI_RSPTYP EQU (0x3:SHL:6) ;- (MCI) Response Type -AT91C_MCI_RSPTYP_NO EQU (0x0:SHL:6) ;- (MCI) No response -AT91C_MCI_RSPTYP_48 EQU (0x1:SHL:6) ;- (MCI) 48-bit response -AT91C_MCI_RSPTYP_136 EQU (0x2:SHL:6) ;- (MCI) 136-bit response -AT91C_MCI_SPCMD EQU (0x7:SHL:8) ;- (MCI) Special CMD -AT91C_MCI_SPCMD_NONE EQU (0x0:SHL:8) ;- (MCI) Not a special CMD -AT91C_MCI_SPCMD_INIT EQU (0x1:SHL:8) ;- (MCI) Initialization CMD -AT91C_MCI_SPCMD_SYNC EQU (0x2:SHL:8) ;- (MCI) Synchronized CMD -AT91C_MCI_SPCMD_IT_CMD EQU (0x4:SHL:8) ;- (MCI) Interrupt command -AT91C_MCI_SPCMD_IT_REP EQU (0x5:SHL:8) ;- (MCI) Interrupt response -AT91C_MCI_OPDCMD EQU (0x1:SHL:11) ;- (MCI) Open Drain Command -AT91C_MCI_MAXLAT EQU (0x1:SHL:12) ;- (MCI) Maximum Latency for Command to respond -AT91C_MCI_TRCMD EQU (0x3:SHL:16) ;- (MCI) Transfer CMD -AT91C_MCI_TRCMD_NO EQU (0x0:SHL:16) ;- (MCI) No transfer -AT91C_MCI_TRCMD_START EQU (0x1:SHL:16) ;- (MCI) Start transfer -AT91C_MCI_TRCMD_STOP EQU (0x2:SHL:16) ;- (MCI) Stop transfer -AT91C_MCI_TRDIR EQU (0x1:SHL:18) ;- (MCI) Transfer Direction -AT91C_MCI_TRTYP EQU (0x3:SHL:19) ;- (MCI) Transfer Type -AT91C_MCI_TRTYP_BLOCK EQU (0x0:SHL:19) ;- (MCI) Block Transfer type -AT91C_MCI_TRTYP_MULTIPLE EQU (0x1:SHL:19) ;- (MCI) Multiple Block transfer type -AT91C_MCI_TRTYP_STREAM EQU (0x2:SHL:19) ;- (MCI) Stream transfer type -;- -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- -AT91C_MCI_CMDRDY EQU (0x1:SHL:0) ;- (MCI) Command Ready flag -AT91C_MCI_RXRDY EQU (0x1:SHL:1) ;- (MCI) RX Ready flag -AT91C_MCI_TXRDY EQU (0x1:SHL:2) ;- (MCI) TX Ready flag -AT91C_MCI_BLKE EQU (0x1:SHL:3) ;- (MCI) Data Block Transfer Ended flag -AT91C_MCI_DTIP EQU (0x1:SHL:4) ;- (MCI) Data Transfer in Progress flag -AT91C_MCI_NOTBUSY EQU (0x1:SHL:5) ;- (MCI) Data Line Not Busy flag -AT91C_MCI_ENDRX EQU (0x1:SHL:6) ;- (MCI) End of RX Buffer flag -AT91C_MCI_ENDTX EQU (0x1:SHL:7) ;- (MCI) End of TX Buffer flag -AT91C_MCI_RXBUFF EQU (0x1:SHL:14) ;- (MCI) RX Buffer Full flag -AT91C_MCI_TXBUFE EQU (0x1:SHL:15) ;- (MCI) TX Buffer Empty flag -AT91C_MCI_RINDE EQU (0x1:SHL:16) ;- (MCI) Response Index Error flag -AT91C_MCI_RDIRE EQU (0x1:SHL:17) ;- (MCI) Response Direction Error flag -AT91C_MCI_RCRCE EQU (0x1:SHL:18) ;- (MCI) Response CRC Error flag -AT91C_MCI_RENDE EQU (0x1:SHL:19) ;- (MCI) Response End Bit Error flag -AT91C_MCI_RTOE EQU (0x1:SHL:20) ;- (MCI) Response Time-out Error flag -AT91C_MCI_DCRCE EQU (0x1:SHL:21) ;- (MCI) data CRC Error flag -AT91C_MCI_DTOE EQU (0x1:SHL:22) ;- (MCI) Data timeout Error flag -AT91C_MCI_OVRE EQU (0x1:SHL:30) ;- (MCI) Overrun flag -AT91C_MCI_UNRE EQU (0x1:SHL:31) ;- (MCI) Underrun flag -;- -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- -;- -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- -;- -------- MCI_IMR : (MCI Offset: 0x4c) MCI Interrupt Mask Register -------- - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR USB Device Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_UDP -UDP_NUM # 4 ;- Frame Number Register -UDP_GLBSTATE # 4 ;- Global State Register -UDP_FADDR # 4 ;- Function Address Register - # 4 ;- Reserved -UDP_IER # 4 ;- Interrupt Enable Register -UDP_IDR # 4 ;- Interrupt Disable Register -UDP_IMR # 4 ;- Interrupt Mask Register -UDP_ISR # 4 ;- Interrupt Status Register -UDP_ICR # 4 ;- Interrupt Clear Register - # 4 ;- Reserved -UDP_RSTEP # 4 ;- Reset Endpoint Register - # 4 ;- Reserved -UDP_CSR # 32 ;- Endpoint Control and Status Register -UDP_FDR # 32 ;- Endpoint FIFO Data Register -;- -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- -AT91C_UDP_FRM_NUM EQU (0x7FF:SHL:0) ;- (UDP) Frame Number as Defined in the Packet Field Formats -AT91C_UDP_FRM_ERR EQU (0x1:SHL:16) ;- (UDP) Frame Error -AT91C_UDP_FRM_OK EQU (0x1:SHL:17) ;- (UDP) Frame OK -;- -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- -AT91C_UDP_FADDEN EQU (0x1:SHL:0) ;- (UDP) Function Address Enable -AT91C_UDP_CONFG EQU (0x1:SHL:1) ;- (UDP) Configured -AT91C_UDP_RMWUPE EQU (0x1:SHL:2) ;- (UDP) Remote Wake Up Enable -AT91C_UDP_RSMINPR EQU (0x1:SHL:3) ;- (UDP) A Resume Has Been Sent to the Host -;- -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- -AT91C_UDP_FADD EQU (0xFF:SHL:0) ;- (UDP) Function Address Value -AT91C_UDP_FEN EQU (0x1:SHL:8) ;- (UDP) Function Enable -;- -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- -AT91C_UDP_EPINT0 EQU (0x1:SHL:0) ;- (UDP) Endpoint 0 Interrupt -AT91C_UDP_EPINT1 EQU (0x1:SHL:1) ;- (UDP) Endpoint 0 Interrupt -AT91C_UDP_EPINT2 EQU (0x1:SHL:2) ;- (UDP) Endpoint 2 Interrupt -AT91C_UDP_EPINT3 EQU (0x1:SHL:3) ;- (UDP) Endpoint 3 Interrupt -AT91C_UDP_EPINT4 EQU (0x1:SHL:4) ;- (UDP) Endpoint 4 Interrupt -AT91C_UDP_EPINT5 EQU (0x1:SHL:5) ;- (UDP) Endpoint 5 Interrupt -AT91C_UDP_EPINT6 EQU (0x1:SHL:6) ;- (UDP) Endpoint 6 Interrupt -AT91C_UDP_EPINT7 EQU (0x1:SHL:7) ;- (UDP) Endpoint 7 Interrupt -AT91C_UDP_RXSUSP EQU (0x1:SHL:8) ;- (UDP) USB Suspend Interrupt -AT91C_UDP_RXRSM EQU (0x1:SHL:9) ;- (UDP) USB Resume Interrupt -AT91C_UDP_EXTRSM EQU (0x1:SHL:10) ;- (UDP) USB External Resume Interrupt -AT91C_UDP_SOFINT EQU (0x1:SHL:11) ;- (UDP) USB Start Of frame Interrupt -AT91C_UDP_WAKEUP EQU (0x1:SHL:13) ;- (UDP) USB Resume Interrupt -;- -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- -;- -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- -;- -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- -AT91C_UDP_ENDBUSRES EQU (0x1:SHL:12) ;- (UDP) USB End Of Bus Reset Interrupt -;- -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- -;- -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- -AT91C_UDP_EP0 EQU (0x1:SHL:0) ;- (UDP) Reset Endpoint 0 -AT91C_UDP_EP1 EQU (0x1:SHL:1) ;- (UDP) Reset Endpoint 1 -AT91C_UDP_EP2 EQU (0x1:SHL:2) ;- (UDP) Reset Endpoint 2 -AT91C_UDP_EP3 EQU (0x1:SHL:3) ;- (UDP) Reset Endpoint 3 -AT91C_UDP_EP4 EQU (0x1:SHL:4) ;- (UDP) Reset Endpoint 4 -AT91C_UDP_EP5 EQU (0x1:SHL:5) ;- (UDP) Reset Endpoint 5 -AT91C_UDP_EP6 EQU (0x1:SHL:6) ;- (UDP) Reset Endpoint 6 -AT91C_UDP_EP7 EQU (0x1:SHL:7) ;- (UDP) Reset Endpoint 7 -;- -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- -AT91C_UDP_TXCOMP EQU (0x1:SHL:0) ;- (UDP) Generates an IN packet with data previously written in the DPR -AT91C_UDP_RX_DATA_BK0 EQU (0x1:SHL:1) ;- (UDP) Receive Data Bank 0 -AT91C_UDP_RXSETUP EQU (0x1:SHL:2) ;- (UDP) Sends STALL to the Host (Control endpoints) -AT91C_UDP_ISOERROR EQU (0x1:SHL:3) ;- (UDP) Isochronous error (Isochronous endpoints) -AT91C_UDP_TXPKTRDY EQU (0x1:SHL:4) ;- (UDP) Transmit Packet Ready -AT91C_UDP_FORCESTALL EQU (0x1:SHL:5) ;- (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints). -AT91C_UDP_RX_DATA_BK1 EQU (0x1:SHL:6) ;- (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes). -AT91C_UDP_DIR EQU (0x1:SHL:7) ;- (UDP) Transfer Direction -AT91C_UDP_EPTYPE EQU (0x7:SHL:8) ;- (UDP) Endpoint type -AT91C_UDP_EPTYPE_CTRL EQU (0x0:SHL:8) ;- (UDP) Control -AT91C_UDP_EPTYPE_ISO_OUT EQU (0x1:SHL:8) ;- (UDP) Isochronous OUT -AT91C_UDP_EPTYPE_BULK_OUT EQU (0x2:SHL:8) ;- (UDP) Bulk OUT -AT91C_UDP_EPTYPE_INT_OUT EQU (0x3:SHL:8) ;- (UDP) Interrupt OUT -AT91C_UDP_EPTYPE_ISO_IN EQU (0x5:SHL:8) ;- (UDP) Isochronous IN -AT91C_UDP_EPTYPE_BULK_IN EQU (0x6:SHL:8) ;- (UDP) Bulk IN -AT91C_UDP_EPTYPE_INT_IN EQU (0x7:SHL:8) ;- (UDP) Interrupt IN -AT91C_UDP_DTGLE EQU (0x1:SHL:11) ;- (UDP) Data Toggle -AT91C_UDP_EPEDS EQU (0x1:SHL:15) ;- (UDP) Endpoint Enable Disable -AT91C_UDP_RXBYTECNT EQU (0x7FF:SHL:16) ;- (UDP) Number Of Bytes Available in the FIFO - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Timer Counter Channel Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_TC -TC_CCR # 4 ;- Channel Control Register -TC_CMR # 4 ;- Channel Mode Register - # 8 ;- Reserved -TC_CV # 4 ;- Counter Value -TC_RA # 4 ;- Register A -TC_RB # 4 ;- Register B -TC_RC # 4 ;- Register C -TC_SR # 4 ;- Status Register -TC_IER # 4 ;- Interrupt Enable Register -TC_IDR # 4 ;- Interrupt Disable Register -TC_IMR # 4 ;- Interrupt Mask Register -;- -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- -AT91C_TC_CLKEN EQU (0x1:SHL:0) ;- (TC) Counter Clock Enable Command -AT91C_TC_CLKDIS EQU (0x1:SHL:1) ;- (TC) Counter Clock Disable Command -AT91C_TC_SWTRG EQU (0x1:SHL:2) ;- (TC) Software Trigger Command -;- -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- -AT91C_TC_CPCSTOP EQU (0x1:SHL:6) ;- (TC) Counter Clock Stopped with RC Compare -AT91C_TC_CPCDIS EQU (0x1:SHL:7) ;- (TC) Counter Clock Disable with RC Compare -AT91C_TC_EEVTEDG EQU (0x3:SHL:8) ;- (TC) External Event Edge Selection -AT91C_TC_EEVTEDG_NONE EQU (0x0:SHL:8) ;- (TC) Edge: None -AT91C_TC_EEVTEDG_RISING EQU (0x1:SHL:8) ;- (TC) Edge: rising edge -AT91C_TC_EEVTEDG_FALLING EQU (0x2:SHL:8) ;- (TC) Edge: falling edge -AT91C_TC_EEVTEDG_BOTH EQU (0x3:SHL:8) ;- (TC) Edge: each edge -AT91C_TC_EEVT EQU (0x3:SHL:10) ;- (TC) External Event Selection -AT91C_TC_EEVT_NONE EQU (0x0:SHL:10) ;- (TC) Signal selected as external event: TIOB TIOB direction: input -AT91C_TC_EEVT_RISING EQU (0x1:SHL:10) ;- (TC) Signal selected as external event: XC0 TIOB direction: output -AT91C_TC_EEVT_FALLING EQU (0x2:SHL:10) ;- (TC) Signal selected as external event: XC1 TIOB direction: output -AT91C_TC_EEVT_BOTH EQU (0x3:SHL:10) ;- (TC) Signal selected as external event: XC2 TIOB direction: output -AT91C_TC_ENETRG EQU (0x1:SHL:12) ;- (TC) External Event Trigger enable -AT91C_TC_WAVESEL EQU (0x3:SHL:13) ;- (TC) Waveform Selection -AT91C_TC_WAVESEL_UP EQU (0x0:SHL:13) ;- (TC) UP mode without atomatic trigger on RC Compare -AT91C_TC_WAVESEL_UPDOWN EQU (0x1:SHL:13) ;- (TC) UPDOWN mode without automatic trigger on RC Compare -AT91C_TC_WAVESEL_UP_AUTO EQU (0x2:SHL:13) ;- (TC) UP mode with automatic trigger on RC Compare -AT91C_TC_WAVESEL_UPDOWN_AUTO EQU (0x3:SHL:13) ;- (TC) UPDOWN mode with automatic trigger on RC Compare -AT91C_TC_CPCTRG EQU (0x1:SHL:14) ;- (TC) RC Compare Trigger Enable -AT91C_TC_WAVE EQU (0x1:SHL:15) ;- (TC) -AT91C_TC_ACPA EQU (0x3:SHL:16) ;- (TC) RA Compare Effect on TIOA -AT91C_TC_ACPA_NONE EQU (0x0:SHL:16) ;- (TC) Effect: none -AT91C_TC_ACPA_SET EQU (0x1:SHL:16) ;- (TC) Effect: set -AT91C_TC_ACPA_CLEAR EQU (0x2:SHL:16) ;- (TC) Effect: clear -AT91C_TC_ACPA_TOGGLE EQU (0x3:SHL:16) ;- (TC) Effect: toggle -AT91C_TC_ACPC EQU (0x3:SHL:18) ;- (TC) RC Compare Effect on TIOA -AT91C_TC_ACPC_NONE EQU (0x0:SHL:18) ;- (TC) Effect: none -AT91C_TC_ACPC_SET EQU (0x1:SHL:18) ;- (TC) Effect: set -AT91C_TC_ACPC_CLEAR EQU (0x2:SHL:18) ;- (TC) Effect: clear -AT91C_TC_ACPC_TOGGLE EQU (0x3:SHL:18) ;- (TC) Effect: toggle -AT91C_TC_AEEVT EQU (0x3:SHL:20) ;- (TC) External Event Effect on TIOA -AT91C_TC_AEEVT_NONE EQU (0x0:SHL:20) ;- (TC) Effect: none -AT91C_TC_AEEVT_SET EQU (0x1:SHL:20) ;- (TC) Effect: set -AT91C_TC_AEEVT_CLEAR EQU (0x2:SHL:20) ;- (TC) Effect: clear -AT91C_TC_AEEVT_TOGGLE EQU (0x3:SHL:20) ;- (TC) Effect: toggle -AT91C_TC_ASWTRG EQU (0x3:SHL:22) ;- (TC) Software Trigger Effect on TIOA -AT91C_TC_ASWTRG_NONE EQU (0x0:SHL:22) ;- (TC) Effect: none -AT91C_TC_ASWTRG_SET EQU (0x1:SHL:22) ;- (TC) Effect: set -AT91C_TC_ASWTRG_CLEAR EQU (0x2:SHL:22) ;- (TC) Effect: clear -AT91C_TC_ASWTRG_TOGGLE EQU (0x3:SHL:22) ;- (TC) Effect: toggle -AT91C_TC_BCPB EQU (0x3:SHL:24) ;- (TC) RB Compare Effect on TIOB -AT91C_TC_BCPB_NONE EQU (0x0:SHL:24) ;- (TC) Effect: none -AT91C_TC_BCPB_SET EQU (0x1:SHL:24) ;- (TC) Effect: set -AT91C_TC_BCPB_CLEAR EQU (0x2:SHL:24) ;- (TC) Effect: clear -AT91C_TC_BCPB_TOGGLE EQU (0x3:SHL:24) ;- (TC) Effect: toggle -AT91C_TC_BCPC EQU (0x3:SHL:26) ;- (TC) RC Compare Effect on TIOB -AT91C_TC_BCPC_NONE EQU (0x0:SHL:26) ;- (TC) Effect: none -AT91C_TC_BCPC_SET EQU (0x1:SHL:26) ;- (TC) Effect: set -AT91C_TC_BCPC_CLEAR EQU (0x2:SHL:26) ;- (TC) Effect: clear -AT91C_TC_BCPC_TOGGLE EQU (0x3:SHL:26) ;- (TC) Effect: toggle -AT91C_TC_BEEVT EQU (0x3:SHL:28) ;- (TC) External Event Effect on TIOB -AT91C_TC_BEEVT_NONE EQU (0x0:SHL:28) ;- (TC) Effect: none -AT91C_TC_BEEVT_SET EQU (0x1:SHL:28) ;- (TC) Effect: set -AT91C_TC_BEEVT_CLEAR EQU (0x2:SHL:28) ;- (TC) Effect: clear -AT91C_TC_BEEVT_TOGGLE EQU (0x3:SHL:28) ;- (TC) Effect: toggle -AT91C_TC_BSWTRG EQU (0x3:SHL:30) ;- (TC) Software Trigger Effect on TIOB -AT91C_TC_BSWTRG_NONE EQU (0x0:SHL:30) ;- (TC) Effect: none -AT91C_TC_BSWTRG_SET EQU (0x1:SHL:30) ;- (TC) Effect: set -AT91C_TC_BSWTRG_CLEAR EQU (0x2:SHL:30) ;- (TC) Effect: clear -AT91C_TC_BSWTRG_TOGGLE EQU (0x3:SHL:30) ;- (TC) Effect: toggle -;- -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- -AT91C_TC_COVFS EQU (0x1:SHL:0) ;- (TC) Counter Overflow -AT91C_TC_LOVRS EQU (0x1:SHL:1) ;- (TC) Load Overrun -AT91C_TC_CPAS EQU (0x1:SHL:2) ;- (TC) RA Compare -AT91C_TC_CPBS EQU (0x1:SHL:3) ;- (TC) RB Compare -AT91C_TC_CPCS EQU (0x1:SHL:4) ;- (TC) RC Compare -AT91C_TC_LDRAS EQU (0x1:SHL:5) ;- (TC) RA Loading -AT91C_TC_LDRBS EQU (0x1:SHL:6) ;- (TC) RB Loading -AT91C_TC_ETRCS EQU (0x1:SHL:7) ;- (TC) External Trigger -AT91C_TC_ETRGS EQU (0x1:SHL:16) ;- (TC) Clock Enabling -AT91C_TC_MTIOA EQU (0x1:SHL:17) ;- (TC) TIOA Mirror -AT91C_TC_MTIOB EQU (0x1:SHL:18) ;- (TC) TIOA Mirror -;- -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- -;- -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- -;- -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Timer Counter Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_TCB -TCB_TC0 # 48 ;- TC Channel 0 - # 16 ;- Reserved -TCB_TC1 # 48 ;- TC Channel 1 - # 16 ;- Reserved -TCB_TC2 # 48 ;- TC Channel 2 - # 16 ;- Reserved -TCB_BCR # 4 ;- TC Block Control Register -TCB_BMR # 4 ;- TC Block Mode Register -;- -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- -AT91C_TCB_SYNC EQU (0x1:SHL:0) ;- (TCB) Synchro Command -;- -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- -AT91C_TCB_TC0XC0S EQU (0x1:SHL:0) ;- (TCB) External Clock Signal 0 Selection -AT91C_TCB_TC0XC0S_TCLK0 EQU (0x0) ;- (TCB) TCLK0 connected to XC0 -AT91C_TCB_TC0XC0S_NONE EQU (0x1) ;- (TCB) None signal connected to XC0 -AT91C_TCB_TC0XC0S_TIOA1 EQU (0x2) ;- (TCB) TIOA1 connected to XC0 -AT91C_TCB_TC0XC0S_TIOA2 EQU (0x3) ;- (TCB) TIOA2 connected to XC0 -AT91C_TCB_TC1XC1S EQU (0x1:SHL:2) ;- (TCB) External Clock Signal 1 Selection -AT91C_TCB_TC1XC1S_TCLK1 EQU (0x0:SHL:2) ;- (TCB) TCLK1 connected to XC1 -AT91C_TCB_TC1XC1S_NONE EQU (0x1:SHL:2) ;- (TCB) None signal connected to XC1 -AT91C_TCB_TC1XC1S_TIOA0 EQU (0x2:SHL:2) ;- (TCB) TIOA0 connected to XC1 -AT91C_TCB_TC1XC1S_TIOA2 EQU (0x3:SHL:2) ;- (TCB) TIOA2 connected to XC1 -AT91C_TCB_TC2XC2S EQU (0x1:SHL:4) ;- (TCB) External Clock Signal 2 Selection -AT91C_TCB_TC2XC2S_TCLK2 EQU (0x0:SHL:4) ;- (TCB) TCLK2 connected to XC2 -AT91C_TCB_TC2XC2S_NONE EQU (0x1:SHL:4) ;- (TCB) None signal connected to XC2 -AT91C_TCB_TC2XC2S_TIOA0 EQU (0x2:SHL:4) ;- (TCB) TIOA0 connected to XC2 -AT91C_TCB_TC2XC2S_TIOA2 EQU (0x3:SHL:4) ;- (TCB) TIOA2 connected to XC2 - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR USB Host Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_UHP -UHP_HcRevision # 4 ;- Revision -UHP_HcControl # 4 ;- Operating modes for the Host Controller -UHP_HcCommandStatus # 4 ;- Command & status Register -UHP_HcInterruptStatus # 4 ;- Interrupt Status Register -UHP_HcInterruptEnable # 4 ;- Interrupt Enable Register -UHP_HcInterruptDisable # 4 ;- Interrupt Disable Register -UHP_HcHCCA # 4 ;- Pointer to the Host Controller Communication Area -UHP_HcPeriodCurrentED # 4 ;- Current Isochronous or Interrupt Endpoint Descriptor -UHP_HcControlHeadED # 4 ;- First Endpoint Descriptor of the Control list -UHP_HcControlCurrentED # 4 ;- Endpoint Control and Status Register -UHP_HcBulkHeadED # 4 ;- First endpoint register of the Bulk list -UHP_HcBulkCurrentED # 4 ;- Current endpoint of the Bulk list -UHP_HcBulkDoneHead # 4 ;- Last completed transfer descriptor -UHP_HcFmInterval # 4 ;- Bit time between 2 consecutive SOFs -UHP_HcFmRemaining # 4 ;- Bit time remaining in the current Frame -UHP_HcFmNumber # 4 ;- Frame number -UHP_HcPeriodicStart # 4 ;- Periodic Start -UHP_HcLSThreshold # 4 ;- LS Threshold -UHP_HcRhDescriptorA # 4 ;- Root Hub characteristics A -UHP_HcRhDescriptorB # 4 ;- Root Hub characteristics B -UHP_HcRhStatus # 4 ;- Root Hub Status register -UHP_HcRhPortStatus # 8 ;- Root Hub Port Status Register - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Ethernet MAC -;- ***************************************************************************** - ^ 0 ;- AT91S_EMAC -EMAC_CTL # 4 ;- Network Control Register -EMAC_CFG # 4 ;- Network Configuration Register -EMAC_SR # 4 ;- Network Status Register -EMAC_TAR # 4 ;- Transmit Address Register -EMAC_TCR # 4 ;- Transmit Control Register -EMAC_TSR # 4 ;- Transmit Status Register -EMAC_RBQP # 4 ;- Receive Buffer Queue Pointer - # 4 ;- Reserved -EMAC_RSR # 4 ;- Receive Status Register -EMAC_ISR # 4 ;- Interrupt Status Register -EMAC_IER # 4 ;- Interrupt Enable Register -EMAC_IDR # 4 ;- Interrupt Disable Register -EMAC_IMR # 4 ;- Interrupt Mask Register -EMAC_MAN # 4 ;- PHY Maintenance Register - # 8 ;- Reserved -EMAC_FRA # 4 ;- Frames Transmitted OK Register -EMAC_SCOL # 4 ;- Single Collision Frame Register -EMAC_MCOL # 4 ;- Multiple Collision Frame Register -EMAC_OK # 4 ;- Frames Received OK Register -EMAC_SEQE # 4 ;- Frame Check Sequence Error Register -EMAC_ALE # 4 ;- Alignment Error Register -EMAC_DTE # 4 ;- Deferred Transmission Frame Register -EMAC_LCOL # 4 ;- Late Collision Register -EMAC_ECOL # 4 ;- Excessive Collision Register -EMAC_CSE # 4 ;- Carrier Sense Error Register -EMAC_TUE # 4 ;- Transmit Underrun Error Register -EMAC_CDE # 4 ;- Code Error Register -EMAC_ELR # 4 ;- Excessive Length Error Register -EMAC_RJB # 4 ;- Receive Jabber Register -EMAC_USF # 4 ;- Undersize Frame Register -EMAC_SQEE # 4 ;- SQE Test Error Register -EMAC_DRFC # 4 ;- Discarded RX Frame Register - # 12 ;- Reserved -EMAC_HSH # 4 ;- Hash Address High[63:32] -EMAC_HSL # 4 ;- Hash Address Low[31:0] -EMAC_SA1L # 4 ;- Specific Address 1 Low, First 4 bytes -EMAC_SA1H # 4 ;- Specific Address 1 High, Last 2 bytes -EMAC_SA2L # 4 ;- Specific Address 2 Low, First 4 bytes -EMAC_SA2H # 4 ;- Specific Address 2 High, Last 2 bytes -EMAC_SA3L # 4 ;- Specific Address 3 Low, First 4 bytes -EMAC_SA3H # 4 ;- Specific Address 3 High, Last 2 bytes -EMAC_SA4L # 4 ;- Specific Address 4 Low, First 4 bytes -EMAC_SA4H # 4 ;- Specific Address 4 High, Last 2 bytesr -;- -------- EMAC_CTL : (EMAC Offset: 0x0) -------- -AT91C_EMAC_LB EQU (0x1:SHL:0) ;- (EMAC) Loopback. Optional. When set, loopback signal is at high level. -AT91C_EMAC_LBL EQU (0x1:SHL:1) ;- (EMAC) Loopback local. -AT91C_EMAC_RE EQU (0x1:SHL:2) ;- (EMAC) Receive enable. -AT91C_EMAC_TE EQU (0x1:SHL:3) ;- (EMAC) Transmit enable. -AT91C_EMAC_MPE EQU (0x1:SHL:4) ;- (EMAC) Management port enable. -AT91C_EMAC_CSR EQU (0x1:SHL:5) ;- (EMAC) Clear statistics registers. -AT91C_EMAC_ISR EQU (0x1:SHL:6) ;- (EMAC) Increment statistics registers. -AT91C_EMAC_WES EQU (0x1:SHL:7) ;- (EMAC) Write enable for statistics registers. -AT91C_EMAC_BP EQU (0x1:SHL:8) ;- (EMAC) Back pressure. -;- -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- -AT91C_EMAC_SPD EQU (0x1:SHL:0) ;- (EMAC) Speed. -AT91C_EMAC_FD EQU (0x1:SHL:1) ;- (EMAC) Full duplex. -AT91C_EMAC_BR EQU (0x1:SHL:2) ;- (EMAC) Bit rate. -AT91C_EMAC_CAF EQU (0x1:SHL:4) ;- (EMAC) Copy all frames. -AT91C_EMAC_NBC EQU (0x1:SHL:5) ;- (EMAC) No broadcast. -AT91C_EMAC_MTI EQU (0x1:SHL:6) ;- (EMAC) Multicast hash enable -AT91C_EMAC_UNI EQU (0x1:SHL:7) ;- (EMAC) Unicast hash enable. -AT91C_EMAC_BIG EQU (0x1:SHL:8) ;- (EMAC) Receive 1522 bytes. -AT91C_EMAC_EAE EQU (0x1:SHL:9) ;- (EMAC) External address match enable. -AT91C_EMAC_CLK EQU (0x3:SHL:10) ;- (EMAC) -AT91C_EMAC_CLK_HCLK_8 EQU (0x0:SHL:10) ;- (EMAC) HCLK divided by 8 -AT91C_EMAC_CLK_HCLK_16 EQU (0x1:SHL:10) ;- (EMAC) HCLK divided by 16 -AT91C_EMAC_CLK_HCLK_32 EQU (0x2:SHL:10) ;- (EMAC) HCLK divided by 32 -AT91C_EMAC_CLK_HCLK_64 EQU (0x3:SHL:10) ;- (EMAC) HCLK divided by 64 -AT91C_EMAC_RTY EQU (0x1:SHL:12) ;- (EMAC) -AT91C_EMAC_RMII EQU (0x1:SHL:13) ;- (EMAC) -;- -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- -AT91C_EMAC_MDIO EQU (0x1:SHL:1) ;- (EMAC) -AT91C_EMAC_IDLE EQU (0x1:SHL:2) ;- (EMAC) -;- -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- -AT91C_EMAC_LEN EQU (0x7FF:SHL:0) ;- (EMAC) -AT91C_EMAC_NCRC EQU (0x1:SHL:15) ;- (EMAC) -;- -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- -AT91C_EMAC_OVR EQU (0x1:SHL:0) ;- (EMAC) -AT91C_EMAC_COL EQU (0x1:SHL:1) ;- (EMAC) -AT91C_EMAC_RLE EQU (0x1:SHL:2) ;- (EMAC) -AT91C_EMAC_TXIDLE EQU (0x1:SHL:3) ;- (EMAC) -AT91C_EMAC_BNQ EQU (0x1:SHL:4) ;- (EMAC) -AT91C_EMAC_COMP EQU (0x1:SHL:5) ;- (EMAC) -AT91C_EMAC_UND EQU (0x1:SHL:6) ;- (EMAC) -;- -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- -AT91C_EMAC_BNA EQU (0x1:SHL:0) ;- (EMAC) -AT91C_EMAC_REC EQU (0x1:SHL:1) ;- (EMAC) -;- -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- -AT91C_EMAC_DONE EQU (0x1:SHL:0) ;- (EMAC) -AT91C_EMAC_RCOM EQU (0x1:SHL:1) ;- (EMAC) -AT91C_EMAC_RBNA EQU (0x1:SHL:2) ;- (EMAC) -AT91C_EMAC_TOVR EQU (0x1:SHL:3) ;- (EMAC) -AT91C_EMAC_TUND EQU (0x1:SHL:4) ;- (EMAC) -AT91C_EMAC_RTRY EQU (0x1:SHL:5) ;- (EMAC) -AT91C_EMAC_TBRE EQU (0x1:SHL:6) ;- (EMAC) -AT91C_EMAC_TCOM EQU (0x1:SHL:7) ;- (EMAC) -AT91C_EMAC_TIDLE EQU (0x1:SHL:8) ;- (EMAC) -AT91C_EMAC_LINK EQU (0x1:SHL:9) ;- (EMAC) -AT91C_EMAC_ROVR EQU (0x1:SHL:10) ;- (EMAC) -AT91C_EMAC_HRESP EQU (0x1:SHL:11) ;- (EMAC) -;- -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- -;- -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- -;- -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- -;- -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- -AT91C_EMAC_DATA EQU (0xFFFF:SHL:0) ;- (EMAC) -AT91C_EMAC_CODE EQU (0x3:SHL:16) ;- (EMAC) -AT91C_EMAC_REGA EQU (0x1F:SHL:18) ;- (EMAC) -AT91C_EMAC_PHYA EQU (0x1F:SHL:23) ;- (EMAC) -AT91C_EMAC_RW EQU (0x3:SHL:28) ;- (EMAC) -AT91C_EMAC_HIGH EQU (0x1:SHL:30) ;- (EMAC) -AT91C_EMAC_LOW EQU (0x1:SHL:31) ;- (EMAC) - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR External Bus Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_EBI -EBI_CSA # 4 ;- Chip Select Assignment Register -EBI_CFGR # 4 ;- Configuration Register -;- -------- EBI_CSA : (EBI Offset: 0x0) Chip Select Assignment Register -------- -AT91C_EBI_CS0A EQU (0x1:SHL:0) ;- (EBI) Chip Select 0 Assignment -AT91C_EBI_CS0A_SMC EQU (0x0) ;- (EBI) Chip Select 0 is assigned to the Static Memory Controller. -AT91C_EBI_CS0A_BFC EQU (0x1) ;- (EBI) Chip Select 0 is assigned to the Burst Flash Controller. -AT91C_EBI_CS1A EQU (0x1:SHL:1) ;- (EBI) Chip Select 1 Assignment -AT91C_EBI_CS1A_SMC EQU (0x0:SHL:1) ;- (EBI) Chip Select 1 is assigned to the Static Memory Controller. -AT91C_EBI_CS1A_SDRAMC EQU (0x1:SHL:1) ;- (EBI) Chip Select 1 is assigned to the SDRAM Controller. -AT91C_EBI_CS3A EQU (0x1:SHL:3) ;- (EBI) Chip Select 3 Assignment -AT91C_EBI_CS3A_SMC EQU (0x0:SHL:3) ;- (EBI) Chip Select 3 is only assigned to the Static Memory Controller and NCS3 behaves as defined by the SMC2. -AT91C_EBI_CS3A_SMC_SmartMedia EQU (0x1:SHL:3) ;- (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated. -AT91C_EBI_CS4A EQU (0x1:SHL:4) ;- (EBI) Chip Select 4 Assignment -AT91C_EBI_CS4A_SMC EQU (0x0:SHL:4) ;- (EBI) Chip Select 4 is assigned to the Static Memory Controller and NCS4,NCS5 and NCS6 behave as defined by the SMC2. -AT91C_EBI_CS4A_SMC_CompactFlash EQU (0x1:SHL:4) ;- (EBI) Chip Select 4 is assigned to the Static Memory Controller and the CompactFlash Logic is activated. -;- -------- EBI_CFGR : (EBI Offset: 0x4) Configuration Register -------- -AT91C_EBI_DBPUC EQU (0x1:SHL:0) ;- (EBI) Data Bus Pull-Up Configuration -AT91C_EBI_EBSEN EQU (0x1:SHL:1) ;- (EBI) Bus Sharing Enable - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_SMC2 -SMC2_CSR # 32 ;- SMC2 Chip Select Register -;- -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- -AT91C_SMC2_NWS EQU (0x7F:SHL:0) ;- (SMC2) Number of Wait States -AT91C_SMC2_WSEN EQU (0x1:SHL:7) ;- (SMC2) Wait State Enable -AT91C_SMC2_TDF EQU (0xF:SHL:8) ;- (SMC2) Data Float Time -AT91C_SMC2_BAT EQU (0x1:SHL:12) ;- (SMC2) Byte Access Type -AT91C_SMC2_DBW EQU (0x1:SHL:13) ;- (SMC2) Data Bus Width -AT91C_SMC2_DBW_16 EQU (0x1:SHL:13) ;- (SMC2) 16-bit. -AT91C_SMC2_DBW_8 EQU (0x2:SHL:13) ;- (SMC2) 8-bit. -AT91C_SMC2_DRP EQU (0x1:SHL:15) ;- (SMC2) Data Read Protocol -AT91C_SMC2_ACSS EQU (0x3:SHL:16) ;- (SMC2) Address to Chip Select Setup -AT91C_SMC2_ACSS_STANDARD EQU (0x0:SHL:16) ;- (SMC2) Standard, asserted at the beginning of the access and deasserted at the end. -AT91C_SMC2_ACSS_1_CYCLE EQU (0x1:SHL:16) ;- (SMC2) One cycle less at the beginning and the end of the access. -AT91C_SMC2_ACSS_2_CYCLES EQU (0x2:SHL:16) ;- (SMC2) Two cycles less at the beginning and the end of the access. -AT91C_SMC2_ACSS_3_CYCLES EQU (0x3:SHL:16) ;- (SMC2) Three cycles less at the beginning and the end of the access. -AT91C_SMC2_RWSETUP EQU (0x7:SHL:24) ;- (SMC2) Read and Write Signal Setup Time -AT91C_SMC2_RWHOLD EQU (0x7:SHL:29) ;- (SMC2) Read and Write Signal Hold Time - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR SDRAM Controller Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_SDRC -SDRC_MR # 4 ;- SDRAM Controller Mode Register -SDRC_TR # 4 ;- SDRAM Controller Refresh Timer Register -SDRC_CR # 4 ;- SDRAM Controller Configuration Register -SDRC_SRR # 4 ;- SDRAM Controller Self Refresh Register -SDRC_LPR # 4 ;- SDRAM Controller Low Power Register -SDRC_IER # 4 ;- SDRAM Controller Interrupt Enable Register -SDRC_IDR # 4 ;- SDRAM Controller Interrupt Disable Register -SDRC_IMR # 4 ;- SDRAM Controller Interrupt Mask Register -SDRC_ISR # 4 ;- SDRAM Controller Interrupt Mask Register -;- -------- SDRC_MR : (SDRC Offset: 0x0) SDRAM Controller Mode Register -------- -AT91C_SDRC_MODE EQU (0xF:SHL:0) ;- (SDRC) Mode -AT91C_SDRC_MODE_NORMAL_CMD EQU (0x0) ;- (SDRC) Normal Mode -AT91C_SDRC_MODE_NOP_CMD EQU (0x1) ;- (SDRC) NOP Command -AT91C_SDRC_MODE_PRCGALL_CMD EQU (0x2) ;- (SDRC) All Banks Precharge Command -AT91C_SDRC_MODE_LMR_CMD EQU (0x3) ;- (SDRC) Load Mode Register Command -AT91C_SDRC_MODE_RFSH_CMD EQU (0x4) ;- (SDRC) Refresh Command -AT91C_SDRC_DBW EQU (0x1:SHL:4) ;- (SDRC) Data Bus Width -AT91C_SDRC_DBW_32_BITS EQU (0x0:SHL:4) ;- (SDRC) 32 Bits datas bus -AT91C_SDRC_DBW_16_BITS EQU (0x1:SHL:4) ;- (SDRC) 16 Bits datas bus -;- -------- SDRC_TR : (SDRC Offset: 0x4) SDRC Refresh Timer Register -------- -AT91C_SDRC_COUNT EQU (0xFFF:SHL:0) ;- (SDRC) Refresh Counter -;- -------- SDRC_CR : (SDRC Offset: 0x8) SDRAM Configuration Register -------- -AT91C_SDRC_NC EQU (0x3:SHL:0) ;- (SDRC) Number of Column Bits -AT91C_SDRC_NC_8 EQU (0x0) ;- (SDRC) 8 Bits -AT91C_SDRC_NC_9 EQU (0x1) ;- (SDRC) 9 Bits -AT91C_SDRC_NC_10 EQU (0x2) ;- (SDRC) 10 Bits -AT91C_SDRC_NC_11 EQU (0x3) ;- (SDRC) 11 Bits -AT91C_SDRC_NR EQU (0x3:SHL:2) ;- (SDRC) Number of Row Bits -AT91C_SDRC_NR_11 EQU (0x0:SHL:2) ;- (SDRC) 11 Bits -AT91C_SDRC_NR_12 EQU (0x1:SHL:2) ;- (SDRC) 12 Bits -AT91C_SDRC_NR_13 EQU (0x2:SHL:2) ;- (SDRC) 13 Bits -AT91C_SDRC_NB EQU (0x1:SHL:4) ;- (SDRC) Number of Banks -AT91C_SDRC_NB_2_BANKS EQU (0x0:SHL:4) ;- (SDRC) 2 banks -AT91C_SDRC_NB_4_BANKS EQU (0x1:SHL:4) ;- (SDRC) 4 banks -AT91C_SDRC_CAS EQU (0x3:SHL:5) ;- (SDRC) CAS Latency -AT91C_SDRC_CAS_2 EQU (0x2:SHL:5) ;- (SDRC) 2 cycles -AT91C_SDRC_TWR EQU (0xF:SHL:7) ;- (SDRC) Number of Write Recovery Time Cycles -AT91C_SDRC_TRC EQU (0xF:SHL:11) ;- (SDRC) Number of RAS Cycle Time Cycles -AT91C_SDRC_TRP EQU (0xF:SHL:15) ;- (SDRC) Number of RAS Precharge Time Cycles -AT91C_SDRC_TRCD EQU (0xF:SHL:19) ;- (SDRC) Number of RAS to CAS Delay Cycles -AT91C_SDRC_TRAS EQU (0xF:SHL:23) ;- (SDRC) Number of RAS Active Time Cycles -AT91C_SDRC_TXSR EQU (0xF:SHL:27) ;- (SDRC) Number of Command Recovery Time Cycles -;- -------- SDRC_SRR : (SDRC Offset: 0xc) SDRAM Controller Self-refresh Register -------- -AT91C_SDRC_SRCB EQU (0x1:SHL:0) ;- (SDRC) Self-refresh Command Bit -;- -------- SDRC_LPR : (SDRC Offset: 0x10) SDRAM Controller Low-power Register -------- -AT91C_SDRC_LPCB EQU (0x1:SHL:0) ;- (SDRC) Low-power Command Bit -;- -------- SDRC_IER : (SDRC Offset: 0x14) SDRAM Controller Interrupt Enable Register -------- -AT91C_SDRC_RES EQU (0x1:SHL:0) ;- (SDRC) Refresh Error Status -;- -------- SDRC_IDR : (SDRC Offset: 0x18) SDRAM Controller Interrupt Disable Register -------- -;- -------- SDRC_IMR : (SDRC Offset: 0x1c) SDRAM Controller Interrupt Mask Register -------- -;- -------- SDRC_ISR : (SDRC Offset: 0x20) SDRAM Controller Interrupt Status Register -------- - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Burst Flash Controller Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_BFC -BFC_MR # 4 ;- BFC Mode Register -;- -------- BFC_MR : (BFC Offset: 0x0) BFC Mode Register -------- -AT91C_BFC_BFCOM EQU (0x3:SHL:0) ;- (BFC) Burst Flash Controller Operating Mode -AT91C_BFC_BFCOM_DISABLED EQU (0x0) ;- (BFC) NPCS0 is driven by the SMC or remains high. -AT91C_BFC_BFCOM_ASYNC EQU (0x1) ;- (BFC) Asynchronous -AT91C_BFC_BFCOM_BURST_READ EQU (0x2) ;- (BFC) Burst Read -AT91C_BFC_BFCC EQU (0x3:SHL:2) ;- (BFC) Burst Flash Controller Operating Mode -AT91C_BFC_BFCC_MCK EQU (0x1:SHL:2) ;- (BFC) Master Clock. -AT91C_BFC_BFCC_MCK_DIV_2 EQU (0x2:SHL:2) ;- (BFC) Master Clock divided by 2. -AT91C_BFC_BFCC_MCK_DIV_4 EQU (0x3:SHL:2) ;- (BFC) Master Clock divided by 4. -AT91C_BFC_AVL EQU (0xF:SHL:4) ;- (BFC) Address Valid Latency -AT91C_BFC_PAGES EQU (0x7:SHL:8) ;- (BFC) Page Size -AT91C_BFC_PAGES_NO_PAGE EQU (0x0:SHL:8) ;- (BFC) No page handling. -AT91C_BFC_PAGES_16 EQU (0x1:SHL:8) ;- (BFC) 16 bytes page size. -AT91C_BFC_PAGES_32 EQU (0x2:SHL:8) ;- (BFC) 32 bytes page size. -AT91C_BFC_PAGES_64 EQU (0x3:SHL:8) ;- (BFC) 64 bytes page size. -AT91C_BFC_PAGES_128 EQU (0x4:SHL:8) ;- (BFC) 128 bytes page size. -AT91C_BFC_PAGES_256 EQU (0x5:SHL:8) ;- (BFC) 256 bytes page size. -AT91C_BFC_PAGES_512 EQU (0x6:SHL:8) ;- (BFC) 512 bytes page size. -AT91C_BFC_PAGES_1024 EQU (0x7:SHL:8) ;- (BFC) 1024 bytes page size. -AT91C_BFC_OEL EQU (0x3:SHL:12) ;- (BFC) Output Enable Latency -AT91C_BFC_BAAEN EQU (0x1:SHL:16) ;- (BFC) Burst Address Advance Enable -AT91C_BFC_BFOEH EQU (0x1:SHL:17) ;- (BFC) Burst Flash Output Enable Handling -AT91C_BFC_MUXEN EQU (0x1:SHL:18) ;- (BFC) Multiplexed Bus Enable -AT91C_BFC_RDYEN EQU (0x1:SHL:19) ;- (BFC) Ready Enable Mode - -;- ***************************************************************************** -;- REGISTER ADDRESS DEFINITION FOR AT91RM9200 -;- ***************************************************************************** -;- ========== Register definition for SYS peripheral ========== -;- ========== Register definition for MC peripheral ========== -AT91C_MC_PUER EQU (0xFFFFFF54) ;- (MC) MC Protection Unit Enable Register -AT91C_MC_ASR EQU (0xFFFFFF04) ;- (MC) MC Abort Status Register -AT91C_MC_PUP EQU (0xFFFFFF50) ;- (MC) MC Protection Unit Peripherals -AT91C_MC_PUIA EQU (0xFFFFFF10) ;- (MC) MC Protection Unit Area -AT91C_MC_AASR EQU (0xFFFFFF08) ;- (MC) MC Abort Address Status Register -AT91C_MC_RCR EQU (0xFFFFFF00) ;- (MC) MC Remap Control Register -;- ========== Register definition for RTC peripheral ========== -AT91C_RTC_IMR EQU (0xFFFFFE28) ;- (RTC) Interrupt Mask Register -AT91C_RTC_IER EQU (0xFFFFFE20) ;- (RTC) Interrupt Enable Register -AT91C_RTC_SR EQU (0xFFFFFE18) ;- (RTC) Status Register -AT91C_RTC_TIMALR EQU (0xFFFFFE10) ;- (RTC) Time Alarm Register -AT91C_RTC_TIMR EQU (0xFFFFFE08) ;- (RTC) Time Register -AT91C_RTC_CR EQU (0xFFFFFE00) ;- (RTC) Control Register -AT91C_RTC_VER EQU (0xFFFFFE2C) ;- (RTC) Valid Entry Register -AT91C_RTC_IDR EQU (0xFFFFFE24) ;- (RTC) Interrupt Disable Register -AT91C_RTC_SCCR EQU (0xFFFFFE1C) ;- (RTC) Status Clear Command Register -AT91C_RTC_CALALR EQU (0xFFFFFE14) ;- (RTC) Calendar Alarm Register -AT91C_RTC_CALR EQU (0xFFFFFE0C) ;- (RTC) Calendar Register -AT91C_RTC_MR EQU (0xFFFFFE04) ;- (RTC) Mode Register -;- ========== Register definition for ST peripheral ========== -AT91C_ST_CRTR EQU (0xFFFFFD24) ;- (ST) Current Real-time Register -AT91C_ST_IMR EQU (0xFFFFFD1C) ;- (ST) Interrupt Mask Register -AT91C_ST_IER EQU (0xFFFFFD14) ;- (ST) Interrupt Enable Register -AT91C_ST_RTMR EQU (0xFFFFFD0C) ;- (ST) Real-time Mode Register -AT91C_ST_PIMR EQU (0xFFFFFD04) ;- (ST) Period Interval Mode Register -AT91C_ST_RTAR EQU (0xFFFFFD20) ;- (ST) Real-time Alarm Register -AT91C_ST_IDR EQU (0xFFFFFD18) ;- (ST) Interrupt Disable Register -AT91C_ST_SR EQU (0xFFFFFD10) ;- (ST) Status Register -AT91C_ST_WDMR EQU (0xFFFFFD08) ;- (ST) Watchdog Mode Register -AT91C_ST_CR EQU (0xFFFFFD00) ;- (ST) Control Register -;- ========== Register definition for PMC peripheral ========== -AT91C_PMC_SCSR EQU (0xFFFFFC08) ;- (PMC) System Clock Status Register -AT91C_PMC_SCER EQU (0xFFFFFC00) ;- (PMC) System Clock Enable Register -AT91C_PMC_IMR EQU (0xFFFFFC6C) ;- (PMC) Interrupt Mask Register -AT91C_PMC_IDR EQU (0xFFFFFC64) ;- (PMC) Interrupt Disable Register -AT91C_PMC_PCDR EQU (0xFFFFFC14) ;- (PMC) Peripheral Clock Disable Register -AT91C_PMC_SCDR EQU (0xFFFFFC04) ;- (PMC) System Clock Disable Register -AT91C_PMC_SR EQU (0xFFFFFC68) ;- (PMC) Status Register -AT91C_PMC_IER EQU (0xFFFFFC60) ;- (PMC) Interrupt Enable Register -AT91C_PMC_MCKR EQU (0xFFFFFC30) ;- (PMC) Master Clock Register -AT91C_PMC_PCER EQU (0xFFFFFC10) ;- (PMC) Peripheral Clock Enable Register -AT91C_PMC_PCSR EQU (0xFFFFFC18) ;- (PMC) Peripheral Clock Status Register -AT91C_PMC_PCKR EQU (0xFFFFFC40) ;- (PMC) Programmable Clock Register -;- ========== Register definition for CKGR peripheral ========== -AT91C_CKGR_PLLBR EQU (0xFFFFFC2C) ;- (CKGR) PLL B Register -AT91C_CKGR_MCFR EQU (0xFFFFFC24) ;- (CKGR) Main Clock Frequency Register -AT91C_CKGR_PLLAR EQU (0xFFFFFC28) ;- (CKGR) PLL A Register -AT91C_CKGR_MOR EQU (0xFFFFFC20) ;- (CKGR) Main Oscillator Register -;- ========== Register definition for PIOD peripheral ========== -AT91C_PIOD_PDSR EQU (0xFFFFFA3C) ;- (PIOD) Pin Data Status Register -AT91C_PIOD_CODR EQU (0xFFFFFA34) ;- (PIOD) Clear Output Data Register -AT91C_PIOD_OWER EQU (0xFFFFFAA0) ;- (PIOD) Output Write Enable Register -AT91C_PIOD_MDER EQU (0xFFFFFA50) ;- (PIOD) Multi-driver Enable Register -AT91C_PIOD_IMR EQU (0xFFFFFA48) ;- (PIOD) Interrupt Mask Register -AT91C_PIOD_IER EQU (0xFFFFFA40) ;- (PIOD) Interrupt Enable Register -AT91C_PIOD_ODSR EQU (0xFFFFFA38) ;- (PIOD) Output Data Status Register -AT91C_PIOD_SODR EQU (0xFFFFFA30) ;- (PIOD) Set Output Data Register -AT91C_PIOD_PER EQU (0xFFFFFA00) ;- (PIOD) PIO Enable Register -AT91C_PIOD_OWDR EQU (0xFFFFFAA4) ;- (PIOD) Output Write Disable Register -AT91C_PIOD_PPUER EQU (0xFFFFFA64) ;- (PIOD) Pull-up Enable Register -AT91C_PIOD_MDDR EQU (0xFFFFFA54) ;- (PIOD) Multi-driver Disable Register -AT91C_PIOD_ISR EQU (0xFFFFFA4C) ;- (PIOD) Interrupt Status Register -AT91C_PIOD_IDR EQU (0xFFFFFA44) ;- (PIOD) Interrupt Disable Register -AT91C_PIOD_PDR EQU (0xFFFFFA04) ;- (PIOD) PIO Disable Register -AT91C_PIOD_ODR EQU (0xFFFFFA14) ;- (PIOD) Output Disable Registerr -AT91C_PIOD_OWSR EQU (0xFFFFFAA8) ;- (PIOD) Output Write Status Register -AT91C_PIOD_ABSR EQU (0xFFFFFA78) ;- (PIOD) AB Select Status Register -AT91C_PIOD_ASR EQU (0xFFFFFA70) ;- (PIOD) Select A Register -AT91C_PIOD_PPUSR EQU (0xFFFFFA68) ;- (PIOD) Pad Pull-up Status Register -AT91C_PIOD_PPUDR EQU (0xFFFFFA60) ;- (PIOD) Pull-up Disable Register -AT91C_PIOD_MDSR EQU (0xFFFFFA58) ;- (PIOD) Multi-driver Status Register -AT91C_PIOD_PSR EQU (0xFFFFFA08) ;- (PIOD) PIO Status Register -AT91C_PIOD_OER EQU (0xFFFFFA10) ;- (PIOD) Output Enable Register -AT91C_PIOD_OSR EQU (0xFFFFFA18) ;- (PIOD) Output Status Register -AT91C_PIOD_IFER EQU (0xFFFFFA20) ;- (PIOD) Input Filter Enable Register -AT91C_PIOD_BSR EQU (0xFFFFFA74) ;- (PIOD) Select B Register -AT91C_PIOD_IFDR EQU (0xFFFFFA24) ;- (PIOD) Input Filter Disable Register -AT91C_PIOD_IFSR EQU (0xFFFFFA28) ;- (PIOD) Input Filter Status Register -;- ========== Register definition for PIOC peripheral ========== -AT91C_PIOC_IFDR EQU (0xFFFFF824) ;- (PIOC) Input Filter Disable Register -AT91C_PIOC_ODR EQU (0xFFFFF814) ;- (PIOC) Output Disable Registerr -AT91C_PIOC_ABSR EQU (0xFFFFF878) ;- (PIOC) AB Select Status Register -AT91C_PIOC_SODR EQU (0xFFFFF830) ;- (PIOC) Set Output Data Register -AT91C_PIOC_IFSR EQU (0xFFFFF828) ;- (PIOC) Input Filter Status Register -AT91C_PIOC_CODR EQU (0xFFFFF834) ;- (PIOC) Clear Output Data Register -AT91C_PIOC_ODSR EQU (0xFFFFF838) ;- (PIOC) Output Data Status Register -AT91C_PIOC_IER EQU (0xFFFFF840) ;- (PIOC) Interrupt Enable Register -AT91C_PIOC_IMR EQU (0xFFFFF848) ;- (PIOC) Interrupt Mask Register -AT91C_PIOC_OWDR EQU (0xFFFFF8A4) ;- (PIOC) Output Write Disable Register -AT91C_PIOC_MDDR EQU (0xFFFFF854) ;- (PIOC) Multi-driver Disable Register -AT91C_PIOC_PDSR EQU (0xFFFFF83C) ;- (PIOC) Pin Data Status Register -AT91C_PIOC_IDR EQU (0xFFFFF844) ;- (PIOC) Interrupt Disable Register -AT91C_PIOC_ISR EQU (0xFFFFF84C) ;- (PIOC) Interrupt Status Register -AT91C_PIOC_PDR EQU (0xFFFFF804) ;- (PIOC) PIO Disable Register -AT91C_PIOC_OWSR EQU (0xFFFFF8A8) ;- (PIOC) Output Write Status Register -AT91C_PIOC_OWER EQU (0xFFFFF8A0) ;- (PIOC) Output Write Enable Register -AT91C_PIOC_ASR EQU (0xFFFFF870) ;- (PIOC) Select A Register -AT91C_PIOC_PPUSR EQU (0xFFFFF868) ;- (PIOC) Pad Pull-up Status Register -AT91C_PIOC_PPUDR EQU (0xFFFFF860) ;- (PIOC) Pull-up Disable Register -AT91C_PIOC_MDSR EQU (0xFFFFF858) ;- (PIOC) Multi-driver Status Register -AT91C_PIOC_MDER EQU (0xFFFFF850) ;- (PIOC) Multi-driver Enable Register -AT91C_PIOC_IFER EQU (0xFFFFF820) ;- (PIOC) Input Filter Enable Register -AT91C_PIOC_OSR EQU (0xFFFFF818) ;- (PIOC) Output Status Register -AT91C_PIOC_OER EQU (0xFFFFF810) ;- (PIOC) Output Enable Register -AT91C_PIOC_PSR EQU (0xFFFFF808) ;- (PIOC) PIO Status Register -AT91C_PIOC_PER EQU (0xFFFFF800) ;- (PIOC) PIO Enable Register -AT91C_PIOC_BSR EQU (0xFFFFF874) ;- (PIOC) Select B Register -AT91C_PIOC_PPUER EQU (0xFFFFF864) ;- (PIOC) Pull-up Enable Register -;- ========== Register definition for PIOB peripheral ========== -AT91C_PIOB_OWSR EQU (0xFFFFF6A8) ;- (PIOB) Output Write Status Register -AT91C_PIOB_PPUSR EQU (0xFFFFF668) ;- (PIOB) Pad Pull-up Status Register -AT91C_PIOB_PPUDR EQU (0xFFFFF660) ;- (PIOB) Pull-up Disable Register -AT91C_PIOB_MDSR EQU (0xFFFFF658) ;- (PIOB) Multi-driver Status Register -AT91C_PIOB_MDER EQU (0xFFFFF650) ;- (PIOB) Multi-driver Enable Register -AT91C_PIOB_IMR EQU (0xFFFFF648) ;- (PIOB) Interrupt Mask Register -AT91C_PIOB_OSR EQU (0xFFFFF618) ;- (PIOB) Output Status Register -AT91C_PIOB_OER EQU (0xFFFFF610) ;- (PIOB) Output Enable Register -AT91C_PIOB_PSR EQU (0xFFFFF608) ;- (PIOB) PIO Status Register -AT91C_PIOB_PER EQU (0xFFFFF600) ;- (PIOB) PIO Enable Register -AT91C_PIOB_BSR EQU (0xFFFFF674) ;- (PIOB) Select B Register -AT91C_PIOB_PPUER EQU (0xFFFFF664) ;- (PIOB) Pull-up Enable Register -AT91C_PIOB_IFDR EQU (0xFFFFF624) ;- (PIOB) Input Filter Disable Register -AT91C_PIOB_ODR EQU (0xFFFFF614) ;- (PIOB) Output Disable Registerr -AT91C_PIOB_ABSR EQU (0xFFFFF678) ;- (PIOB) AB Select Status Register -AT91C_PIOB_ASR EQU (0xFFFFF670) ;- (PIOB) Select A Register -AT91C_PIOB_IFER EQU (0xFFFFF620) ;- (PIOB) Input Filter Enable Register -AT91C_PIOB_IFSR EQU (0xFFFFF628) ;- (PIOB) Input Filter Status Register -AT91C_PIOB_SODR EQU (0xFFFFF630) ;- (PIOB) Set Output Data Register -AT91C_PIOB_ODSR EQU (0xFFFFF638) ;- (PIOB) Output Data Status Register -AT91C_PIOB_CODR EQU (0xFFFFF634) ;- (PIOB) Clear Output Data Register -AT91C_PIOB_PDSR EQU (0xFFFFF63C) ;- (PIOB) Pin Data Status Register -AT91C_PIOB_OWER EQU (0xFFFFF6A0) ;- (PIOB) Output Write Enable Register -AT91C_PIOB_IER EQU (0xFFFFF640) ;- (PIOB) Interrupt Enable Register -AT91C_PIOB_OWDR EQU (0xFFFFF6A4) ;- (PIOB) Output Write Disable Register -AT91C_PIOB_MDDR EQU (0xFFFFF654) ;- (PIOB) Multi-driver Disable Register -AT91C_PIOB_ISR EQU (0xFFFFF64C) ;- (PIOB) Interrupt Status Register -AT91C_PIOB_IDR EQU (0xFFFFF644) ;- (PIOB) Interrupt Disable Register -AT91C_PIOB_PDR EQU (0xFFFFF604) ;- (PIOB) PIO Disable Register -;- ========== Register definition for PIOA peripheral ========== -AT91C_PIOA_IMR EQU (0xFFFFF448) ;- (PIOA) Interrupt Mask Register -AT91C_PIOA_IER EQU (0xFFFFF440) ;- (PIOA) Interrupt Enable Register -AT91C_PIOA_OWDR EQU (0xFFFFF4A4) ;- (PIOA) Output Write Disable Register -AT91C_PIOA_ISR EQU (0xFFFFF44C) ;- (PIOA) Interrupt Status Register -AT91C_PIOA_PPUDR EQU (0xFFFFF460) ;- (PIOA) Pull-up Disable Register -AT91C_PIOA_MDSR EQU (0xFFFFF458) ;- (PIOA) Multi-driver Status Register -AT91C_PIOA_MDER EQU (0xFFFFF450) ;- (PIOA) Multi-driver Enable Register -AT91C_PIOA_PER EQU (0xFFFFF400) ;- (PIOA) PIO Enable Register -AT91C_PIOA_PSR EQU (0xFFFFF408) ;- (PIOA) PIO Status Register -AT91C_PIOA_OER EQU (0xFFFFF410) ;- (PIOA) Output Enable Register -AT91C_PIOA_BSR EQU (0xFFFFF474) ;- (PIOA) Select B Register -AT91C_PIOA_PPUER EQU (0xFFFFF464) ;- (PIOA) Pull-up Enable Register -AT91C_PIOA_MDDR EQU (0xFFFFF454) ;- (PIOA) Multi-driver Disable Register -AT91C_PIOA_PDR EQU (0xFFFFF404) ;- (PIOA) PIO Disable Register -AT91C_PIOA_ODR EQU (0xFFFFF414) ;- (PIOA) Output Disable Registerr -AT91C_PIOA_IFDR EQU (0xFFFFF424) ;- (PIOA) Input Filter Disable Register -AT91C_PIOA_ABSR EQU (0xFFFFF478) ;- (PIOA) AB Select Status Register -AT91C_PIOA_ASR EQU (0xFFFFF470) ;- (PIOA) Select A Register -AT91C_PIOA_PPUSR EQU (0xFFFFF468) ;- (PIOA) Pad Pull-up Status Register -AT91C_PIOA_ODSR EQU (0xFFFFF438) ;- (PIOA) Output Data Status Register -AT91C_PIOA_SODR EQU (0xFFFFF430) ;- (PIOA) Set Output Data Register -AT91C_PIOA_IFSR EQU (0xFFFFF428) ;- (PIOA) Input Filter Status Register -AT91C_PIOA_IFER EQU (0xFFFFF420) ;- (PIOA) Input Filter Enable Register -AT91C_PIOA_OSR EQU (0xFFFFF418) ;- (PIOA) Output Status Register -AT91C_PIOA_IDR EQU (0xFFFFF444) ;- (PIOA) Interrupt Disable Register -AT91C_PIOA_PDSR EQU (0xFFFFF43C) ;- (PIOA) Pin Data Status Register -AT91C_PIOA_CODR EQU (0xFFFFF434) ;- (PIOA) Clear Output Data Register -AT91C_PIOA_OWSR EQU (0xFFFFF4A8) ;- (PIOA) Output Write Status Register -AT91C_PIOA_OWER EQU (0xFFFFF4A0) ;- (PIOA) Output Write Enable Register -;- ========== Register definition for DBGU peripheral ========== -AT91C_DBGU_C2R EQU (0xFFFFF244) ;- (DBGU) Chip ID2 Register -AT91C_DBGU_THR EQU (0xFFFFF21C) ;- (DBGU) Transmitter Holding Register -AT91C_DBGU_CSR EQU (0xFFFFF214) ;- (DBGU) Channel Status Register -AT91C_DBGU_IDR EQU (0xFFFFF20C) ;- (DBGU) Interrupt Disable Register -AT91C_DBGU_MR EQU (0xFFFFF204) ;- (DBGU) Mode Register -AT91C_DBGU_FNTR EQU (0xFFFFF248) ;- (DBGU) Force NTRST Register -AT91C_DBGU_C1R EQU (0xFFFFF240) ;- (DBGU) Chip ID1 Register -AT91C_DBGU_BRGR EQU (0xFFFFF220) ;- (DBGU) Baud Rate Generator Register -AT91C_DBGU_RHR EQU (0xFFFFF218) ;- (DBGU) Receiver Holding Register -AT91C_DBGU_IMR EQU (0xFFFFF210) ;- (DBGU) Interrupt Mask Register -AT91C_DBGU_IER EQU (0xFFFFF208) ;- (DBGU) Interrupt Enable Register -AT91C_DBGU_CR EQU (0xFFFFF200) ;- (DBGU) Control Register -;- ========== Register definition for PDC_DBGU peripheral ========== -AT91C_DBGU_TNCR EQU (0xFFFFF31C) ;- (PDC_DBGU) Transmit Next Counter Register -AT91C_DBGU_RNCR EQU (0xFFFFF314) ;- (PDC_DBGU) Receive Next Counter Register -AT91C_DBGU_PTCR EQU (0xFFFFF320) ;- (PDC_DBGU) PDC Transfer Control Register -AT91C_DBGU_PTSR EQU (0xFFFFF324) ;- (PDC_DBGU) PDC Transfer Status Register -AT91C_DBGU_RCR EQU (0xFFFFF304) ;- (PDC_DBGU) Receive Counter Register -AT91C_DBGU_TCR EQU (0xFFFFF30C) ;- (PDC_DBGU) Transmit Counter Register -AT91C_DBGU_RPR EQU (0xFFFFF300) ;- (PDC_DBGU) Receive Pointer Register -AT91C_DBGU_TPR EQU (0xFFFFF308) ;- (PDC_DBGU) Transmit Pointer Register -AT91C_DBGU_RNPR EQU (0xFFFFF310) ;- (PDC_DBGU) Receive Next Pointer Register -AT91C_DBGU_TNPR EQU (0xFFFFF318) ;- (PDC_DBGU) Transmit Next Pointer Register -;- ========== Register definition for AIC peripheral ========== -AT91C_AIC_ICCR EQU (0xFFFFF128) ;- (AIC) Interrupt Clear Command Register -AT91C_AIC_IECR EQU (0xFFFFF120) ;- (AIC) Interrupt Enable Command Register -AT91C_AIC_SMR EQU (0xFFFFF000) ;- (AIC) Source Mode Register -AT91C_AIC_ISCR EQU (0xFFFFF12C) ;- (AIC) Interrupt Set Command Register -AT91C_AIC_EOICR EQU (0xFFFFF130) ;- (AIC) End of Interrupt Command Register -AT91C_AIC_DCR EQU (0xFFFFF138) ;- (AIC) Debug Control Register (Protect) -AT91C_AIC_FFER EQU (0xFFFFF140) ;- (AIC) Fast Forcing Enable Register -AT91C_AIC_SVR EQU (0xFFFFF080) ;- (AIC) Source Vector Register -AT91C_AIC_SPU EQU (0xFFFFF134) ;- (AIC) Spurious Vector Register -AT91C_AIC_FFDR EQU (0xFFFFF144) ;- (AIC) Fast Forcing Disable Register -AT91C_AIC_FVR EQU (0xFFFFF104) ;- (AIC) FIQ Vector Register -AT91C_AIC_FFSR EQU (0xFFFFF148) ;- (AIC) Fast Forcing Status Register -AT91C_AIC_IMR EQU (0xFFFFF110) ;- (AIC) Interrupt Mask Register -AT91C_AIC_ISR EQU (0xFFFFF108) ;- (AIC) Interrupt Status Register -AT91C_AIC_IVR EQU (0xFFFFF100) ;- (AIC) IRQ Vector Register -AT91C_AIC_IDCR EQU (0xFFFFF124) ;- (AIC) Interrupt Disable Command Register -AT91C_AIC_CISR EQU (0xFFFFF114) ;- (AIC) Core Interrupt Status Register -AT91C_AIC_IPR EQU (0xFFFFF10C) ;- (AIC) Interrupt Pending Register -;- ========== Register definition for PDC_SPI peripheral ========== -AT91C_SPI_PTCR EQU (0xFFFE0120) ;- (PDC_SPI) PDC Transfer Control Register -AT91C_SPI_TNPR EQU (0xFFFE0118) ;- (PDC_SPI) Transmit Next Pointer Register -AT91C_SPI_RNPR EQU (0xFFFE0110) ;- (PDC_SPI) Receive Next Pointer Register -AT91C_SPI_TPR EQU (0xFFFE0108) ;- (PDC_SPI) Transmit Pointer Register -AT91C_SPI_RPR EQU (0xFFFE0100) ;- (PDC_SPI) Receive Pointer Register -AT91C_SPI_PTSR EQU (0xFFFE0124) ;- (PDC_SPI) PDC Transfer Status Register -AT91C_SPI_TNCR EQU (0xFFFE011C) ;- (PDC_SPI) Transmit Next Counter Register -AT91C_SPI_RNCR EQU (0xFFFE0114) ;- (PDC_SPI) Receive Next Counter Register -AT91C_SPI_TCR EQU (0xFFFE010C) ;- (PDC_SPI) Transmit Counter Register -AT91C_SPI_RCR EQU (0xFFFE0104) ;- (PDC_SPI) Receive Counter Register -;- ========== Register definition for SPI peripheral ========== -AT91C_SPI_CSR EQU (0xFFFE0030) ;- (SPI) Chip Select Register -AT91C_SPI_IDR EQU (0xFFFE0018) ;- (SPI) Interrupt Disable Register -AT91C_SPI_SR EQU (0xFFFE0010) ;- (SPI) Status Register -AT91C_SPI_RDR EQU (0xFFFE0008) ;- (SPI) Receive Data Register -AT91C_SPI_CR EQU (0xFFFE0000) ;- (SPI) Control Register -AT91C_SPI_IMR EQU (0xFFFE001C) ;- (SPI) Interrupt Mask Register -AT91C_SPI_IER EQU (0xFFFE0014) ;- (SPI) Interrupt Enable Register -AT91C_SPI_TDR EQU (0xFFFE000C) ;- (SPI) Transmit Data Register -AT91C_SPI_MR EQU (0xFFFE0004) ;- (SPI) Mode Register -;- ========== Register definition for PDC_SSC2 peripheral ========== -AT91C_SSC2_PTCR EQU (0xFFFD8120) ;- (PDC_SSC2) PDC Transfer Control Register -AT91C_SSC2_TNPR EQU (0xFFFD8118) ;- (PDC_SSC2) Transmit Next Pointer Register -AT91C_SSC2_RNPR EQU (0xFFFD8110) ;- (PDC_SSC2) Receive Next Pointer Register -AT91C_SSC2_TPR EQU (0xFFFD8108) ;- (PDC_SSC2) Transmit Pointer Register -AT91C_SSC2_RPR EQU (0xFFFD8100) ;- (PDC_SSC2) Receive Pointer Register -AT91C_SSC2_PTSR EQU (0xFFFD8124) ;- (PDC_SSC2) PDC Transfer Status Register -AT91C_SSC2_TNCR EQU (0xFFFD811C) ;- (PDC_SSC2) Transmit Next Counter Register -AT91C_SSC2_RNCR EQU (0xFFFD8114) ;- (PDC_SSC2) Receive Next Counter Register -AT91C_SSC2_TCR EQU (0xFFFD810C) ;- (PDC_SSC2) Transmit Counter Register -AT91C_SSC2_RCR EQU (0xFFFD8104) ;- (PDC_SSC2) Receive Counter Register -;- ========== Register definition for SSC2 peripheral ========== -AT91C_SSC2_IMR EQU (0xFFFD804C) ;- (SSC2) Interrupt Mask Register -AT91C_SSC2_IER EQU (0xFFFD8044) ;- (SSC2) Interrupt Enable Register -AT91C_SSC2_RC1R EQU (0xFFFD803C) ;- (SSC2) Receive Compare 1 Register -AT91C_SSC2_TSHR EQU (0xFFFD8034) ;- (SSC2) Transmit Sync Holding Register -AT91C_SSC2_CMR EQU (0xFFFD8004) ;- (SSC2) Clock Mode Register -AT91C_SSC2_IDR EQU (0xFFFD8048) ;- (SSC2) Interrupt Disable Register -AT91C_SSC2_TCMR EQU (0xFFFD8018) ;- (SSC2) Transmit Clock Mode Register -AT91C_SSC2_RCMR EQU (0xFFFD8010) ;- (SSC2) Receive Clock ModeRegister -AT91C_SSC2_CR EQU (0xFFFD8000) ;- (SSC2) Control Register -AT91C_SSC2_RFMR EQU (0xFFFD8014) ;- (SSC2) Receive Frame Mode Register -AT91C_SSC2_TFMR EQU (0xFFFD801C) ;- (SSC2) Transmit Frame Mode Register -AT91C_SSC2_THR EQU (0xFFFD8024) ;- (SSC2) Transmit Holding Register -AT91C_SSC2_SR EQU (0xFFFD8040) ;- (SSC2) Status Register -AT91C_SSC2_RC0R EQU (0xFFFD8038) ;- (SSC2) Receive Compare 0 Register -AT91C_SSC2_RSHR EQU (0xFFFD8030) ;- (SSC2) Receive Sync Holding Register -AT91C_SSC2_RHR EQU (0xFFFD8020) ;- (SSC2) Receive Holding Register -;- ========== Register definition for PDC_SSC1 peripheral ========== -AT91C_SSC1_PTCR EQU (0xFFFD4120) ;- (PDC_SSC1) PDC Transfer Control Register -AT91C_SSC1_TNPR EQU (0xFFFD4118) ;- (PDC_SSC1) Transmit Next Pointer Register -AT91C_SSC1_RNPR EQU (0xFFFD4110) ;- (PDC_SSC1) Receive Next Pointer Register -AT91C_SSC1_TPR EQU (0xFFFD4108) ;- (PDC_SSC1) Transmit Pointer Register -AT91C_SSC1_RPR EQU (0xFFFD4100) ;- (PDC_SSC1) Receive Pointer Register -AT91C_SSC1_PTSR EQU (0xFFFD4124) ;- (PDC_SSC1) PDC Transfer Status Register -AT91C_SSC1_TNCR EQU (0xFFFD411C) ;- (PDC_SSC1) Transmit Next Counter Register -AT91C_SSC1_RNCR EQU (0xFFFD4114) ;- (PDC_SSC1) Receive Next Counter Register -AT91C_SSC1_TCR EQU (0xFFFD410C) ;- (PDC_SSC1) Transmit Counter Register -AT91C_SSC1_RCR EQU (0xFFFD4104) ;- (PDC_SSC1) Receive Counter Register -;- ========== Register definition for SSC1 peripheral ========== -AT91C_SSC1_RFMR EQU (0xFFFD4014) ;- (SSC1) Receive Frame Mode Register -AT91C_SSC1_CMR EQU (0xFFFD4004) ;- (SSC1) Clock Mode Register -AT91C_SSC1_IDR EQU (0xFFFD4048) ;- (SSC1) Interrupt Disable Register -AT91C_SSC1_SR EQU (0xFFFD4040) ;- (SSC1) Status Register -AT91C_SSC1_RC0R EQU (0xFFFD4038) ;- (SSC1) Receive Compare 0 Register -AT91C_SSC1_RSHR EQU (0xFFFD4030) ;- (SSC1) Receive Sync Holding Register -AT91C_SSC1_RHR EQU (0xFFFD4020) ;- (SSC1) Receive Holding Register -AT91C_SSC1_TCMR EQU (0xFFFD4018) ;- (SSC1) Transmit Clock Mode Register -AT91C_SSC1_RCMR EQU (0xFFFD4010) ;- (SSC1) Receive Clock ModeRegister -AT91C_SSC1_CR EQU (0xFFFD4000) ;- (SSC1) Control Register -AT91C_SSC1_IMR EQU (0xFFFD404C) ;- (SSC1) Interrupt Mask Register -AT91C_SSC1_IER EQU (0xFFFD4044) ;- (SSC1) Interrupt Enable Register -AT91C_SSC1_RC1R EQU (0xFFFD403C) ;- (SSC1) Receive Compare 1 Register -AT91C_SSC1_TSHR EQU (0xFFFD4034) ;- (SSC1) Transmit Sync Holding Register -AT91C_SSC1_THR EQU (0xFFFD4024) ;- (SSC1) Transmit Holding Register -AT91C_SSC1_TFMR EQU (0xFFFD401C) ;- (SSC1) Transmit Frame Mode Register -;- ========== Register definition for PDC_SSC0 peripheral ========== -AT91C_SSC0_PTCR EQU (0xFFFD0120) ;- (PDC_SSC0) PDC Transfer Control Register -AT91C_SSC0_TNPR EQU (0xFFFD0118) ;- (PDC_SSC0) Transmit Next Pointer Register -AT91C_SSC0_RNPR EQU (0xFFFD0110) ;- (PDC_SSC0) Receive Next Pointer Register -AT91C_SSC0_TPR EQU (0xFFFD0108) ;- (PDC_SSC0) Transmit Pointer Register -AT91C_SSC0_RPR EQU (0xFFFD0100) ;- (PDC_SSC0) Receive Pointer Register -AT91C_SSC0_PTSR EQU (0xFFFD0124) ;- (PDC_SSC0) PDC Transfer Status Register -AT91C_SSC0_TNCR EQU (0xFFFD011C) ;- (PDC_SSC0) Transmit Next Counter Register -AT91C_SSC0_RNCR EQU (0xFFFD0114) ;- (PDC_SSC0) Receive Next Counter Register -AT91C_SSC0_TCR EQU (0xFFFD010C) ;- (PDC_SSC0) Transmit Counter Register -AT91C_SSC0_RCR EQU (0xFFFD0104) ;- (PDC_SSC0) Receive Counter Register -;- ========== Register definition for SSC0 peripheral ========== -AT91C_SSC0_IMR EQU (0xFFFD004C) ;- (SSC0) Interrupt Mask Register -AT91C_SSC0_IER EQU (0xFFFD0044) ;- (SSC0) Interrupt Enable Register -AT91C_SSC0_RC1R EQU (0xFFFD003C) ;- (SSC0) Receive Compare 1 Register -AT91C_SSC0_TSHR EQU (0xFFFD0034) ;- (SSC0) Transmit Sync Holding Register -AT91C_SSC0_THR EQU (0xFFFD0024) ;- (SSC0) Transmit Holding Register -AT91C_SSC0_TFMR EQU (0xFFFD001C) ;- (SSC0) Transmit Frame Mode Register -AT91C_SSC0_RFMR EQU (0xFFFD0014) ;- (SSC0) Receive Frame Mode Register -AT91C_SSC0_CMR EQU (0xFFFD0004) ;- (SSC0) Clock Mode Register -AT91C_SSC0_IDR EQU (0xFFFD0048) ;- (SSC0) Interrupt Disable Register -AT91C_SSC0_SR EQU (0xFFFD0040) ;- (SSC0) Status Register -AT91C_SSC0_RC0R EQU (0xFFFD0038) ;- (SSC0) Receive Compare 0 Register -AT91C_SSC0_RSHR EQU (0xFFFD0030) ;- (SSC0) Receive Sync Holding Register -AT91C_SSC0_RHR EQU (0xFFFD0020) ;- (SSC0) Receive Holding Register -AT91C_SSC0_TCMR EQU (0xFFFD0018) ;- (SSC0) Transmit Clock Mode Register -AT91C_SSC0_RCMR EQU (0xFFFD0010) ;- (SSC0) Receive Clock ModeRegister -AT91C_SSC0_CR EQU (0xFFFD0000) ;- (SSC0) Control Register -;- ========== Register definition for PDC_US3 peripheral ========== -AT91C_US3_PTSR EQU (0xFFFCC124) ;- (PDC_US3) PDC Transfer Status Register -AT91C_US3_TNCR EQU (0xFFFCC11C) ;- (PDC_US3) Transmit Next Counter Register -AT91C_US3_RNCR EQU (0xFFFCC114) ;- (PDC_US3) Receive Next Counter Register -AT91C_US3_TCR EQU (0xFFFCC10C) ;- (PDC_US3) Transmit Counter Register -AT91C_US3_RCR EQU (0xFFFCC104) ;- (PDC_US3) Receive Counter Register -AT91C_US3_PTCR EQU (0xFFFCC120) ;- (PDC_US3) PDC Transfer Control Register -AT91C_US3_TNPR EQU (0xFFFCC118) ;- (PDC_US3) Transmit Next Pointer Register -AT91C_US3_RNPR EQU (0xFFFCC110) ;- (PDC_US3) Receive Next Pointer Register -AT91C_US3_TPR EQU (0xFFFCC108) ;- (PDC_US3) Transmit Pointer Register -AT91C_US3_RPR EQU (0xFFFCC100) ;- (PDC_US3) Receive Pointer Register -;- ========== Register definition for US3 peripheral ========== -AT91C_US3_IF EQU (0xFFFCC04C) ;- (US3) IRDA_FILTER Register -AT91C_US3_NER EQU (0xFFFCC044) ;- (US3) Nb Errors Register -AT91C_US3_RTOR EQU (0xFFFCC024) ;- (US3) Receiver Time-out Register -AT91C_US3_THR EQU (0xFFFCC01C) ;- (US3) Transmitter Holding Register -AT91C_US3_CSR EQU (0xFFFCC014) ;- (US3) Channel Status Register -AT91C_US3_IDR EQU (0xFFFCC00C) ;- (US3) Interrupt Disable Register -AT91C_US3_MR EQU (0xFFFCC004) ;- (US3) Mode Register -AT91C_US3_XXR EQU (0xFFFCC048) ;- (US3) XON_XOFF Register -AT91C_US3_FIDI EQU (0xFFFCC040) ;- (US3) FI_DI_Ratio Register -AT91C_US3_TTGR EQU (0xFFFCC028) ;- (US3) Transmitter Time-guard Register -AT91C_US3_BRGR EQU (0xFFFCC020) ;- (US3) Baud Rate Generator Register -AT91C_US3_RHR EQU (0xFFFCC018) ;- (US3) Receiver Holding Register -AT91C_US3_IMR EQU (0xFFFCC010) ;- (US3) Interrupt Mask Register -AT91C_US3_IER EQU (0xFFFCC008) ;- (US3) Interrupt Enable Register -AT91C_US3_CR EQU (0xFFFCC000) ;- (US3) Control Register -;- ========== Register definition for PDC_US2 peripheral ========== -AT91C_US2_PTSR EQU (0xFFFC8124) ;- (PDC_US2) PDC Transfer Status Register -AT91C_US2_TNCR EQU (0xFFFC811C) ;- (PDC_US2) Transmit Next Counter Register -AT91C_US2_RNCR EQU (0xFFFC8114) ;- (PDC_US2) Receive Next Counter Register -AT91C_US2_TCR EQU (0xFFFC810C) ;- (PDC_US2) Transmit Counter Register -AT91C_US2_PTCR EQU (0xFFFC8120) ;- (PDC_US2) PDC Transfer Control Register -AT91C_US2_RCR EQU (0xFFFC8104) ;- (PDC_US2) Receive Counter Register -AT91C_US2_TNPR EQU (0xFFFC8118) ;- (PDC_US2) Transmit Next Pointer Register -AT91C_US2_RPR EQU (0xFFFC8100) ;- (PDC_US2) Receive Pointer Register -AT91C_US2_TPR EQU (0xFFFC8108) ;- (PDC_US2) Transmit Pointer Register -AT91C_US2_RNPR EQU (0xFFFC8110) ;- (PDC_US2) Receive Next Pointer Register -;- ========== Register definition for US2 peripheral ========== -AT91C_US2_XXR EQU (0xFFFC8048) ;- (US2) XON_XOFF Register -AT91C_US2_FIDI EQU (0xFFFC8040) ;- (US2) FI_DI_Ratio Register -AT91C_US2_TTGR EQU (0xFFFC8028) ;- (US2) Transmitter Time-guard Register -AT91C_US2_BRGR EQU (0xFFFC8020) ;- (US2) Baud Rate Generator Register -AT91C_US2_RHR EQU (0xFFFC8018) ;- (US2) Receiver Holding Register -AT91C_US2_IMR EQU (0xFFFC8010) ;- (US2) Interrupt Mask Register -AT91C_US2_IER EQU (0xFFFC8008) ;- (US2) Interrupt Enable Register -AT91C_US2_CR EQU (0xFFFC8000) ;- (US2) Control Register -AT91C_US2_IF EQU (0xFFFC804C) ;- (US2) IRDA_FILTER Register -AT91C_US2_NER EQU (0xFFFC8044) ;- (US2) Nb Errors Register -AT91C_US2_RTOR EQU (0xFFFC8024) ;- (US2) Receiver Time-out Register -AT91C_US2_THR EQU (0xFFFC801C) ;- (US2) Transmitter Holding Register -AT91C_US2_CSR EQU (0xFFFC8014) ;- (US2) Channel Status Register -AT91C_US2_IDR EQU (0xFFFC800C) ;- (US2) Interrupt Disable Register -AT91C_US2_MR EQU (0xFFFC8004) ;- (US2) Mode Register -;- ========== Register definition for PDC_US1 peripheral ========== -AT91C_US1_PTSR EQU (0xFFFC4124) ;- (PDC_US1) PDC Transfer Status Register -AT91C_US1_TNCR EQU (0xFFFC411C) ;- (PDC_US1) Transmit Next Counter Register -AT91C_US1_RNCR EQU (0xFFFC4114) ;- (PDC_US1) Receive Next Counter Register -AT91C_US1_TCR EQU (0xFFFC410C) ;- (PDC_US1) Transmit Counter Register -AT91C_US1_RCR EQU (0xFFFC4104) ;- (PDC_US1) Receive Counter Register -AT91C_US1_PTCR EQU (0xFFFC4120) ;- (PDC_US1) PDC Transfer Control Register -AT91C_US1_TNPR EQU (0xFFFC4118) ;- (PDC_US1) Transmit Next Pointer Register -AT91C_US1_RNPR EQU (0xFFFC4110) ;- (PDC_US1) Receive Next Pointer Register -AT91C_US1_TPR EQU (0xFFFC4108) ;- (PDC_US1) Transmit Pointer Register -AT91C_US1_RPR EQU (0xFFFC4100) ;- (PDC_US1) Receive Pointer Register -;- ========== Register definition for US1 peripheral ========== -AT91C_US1_XXR EQU (0xFFFC4048) ;- (US1) XON_XOFF Register -AT91C_US1_RHR EQU (0xFFFC4018) ;- (US1) Receiver Holding Register -AT91C_US1_IMR EQU (0xFFFC4010) ;- (US1) Interrupt Mask Register -AT91C_US1_IER EQU (0xFFFC4008) ;- (US1) Interrupt Enable Register -AT91C_US1_CR EQU (0xFFFC4000) ;- (US1) Control Register -AT91C_US1_RTOR EQU (0xFFFC4024) ;- (US1) Receiver Time-out Register -AT91C_US1_THR EQU (0xFFFC401C) ;- (US1) Transmitter Holding Register -AT91C_US1_CSR EQU (0xFFFC4014) ;- (US1) Channel Status Register -AT91C_US1_IDR EQU (0xFFFC400C) ;- (US1) Interrupt Disable Register -AT91C_US1_FIDI EQU (0xFFFC4040) ;- (US1) FI_DI_Ratio Register -AT91C_US1_BRGR EQU (0xFFFC4020) ;- (US1) Baud Rate Generator Register -AT91C_US1_TTGR EQU (0xFFFC4028) ;- (US1) Transmitter Time-guard Register -AT91C_US1_IF EQU (0xFFFC404C) ;- (US1) IRDA_FILTER Register -AT91C_US1_NER EQU (0xFFFC4044) ;- (US1) Nb Errors Register -AT91C_US1_MR EQU (0xFFFC4004) ;- (US1) Mode Register -;- ========== Register definition for PDC_US0 peripheral ========== -AT91C_US0_PTCR EQU (0xFFFC0120) ;- (PDC_US0) PDC Transfer Control Register -AT91C_US0_TNPR EQU (0xFFFC0118) ;- (PDC_US0) Transmit Next Pointer Register -AT91C_US0_RNPR EQU (0xFFFC0110) ;- (PDC_US0) Receive Next Pointer Register -AT91C_US0_TPR EQU (0xFFFC0108) ;- (PDC_US0) Transmit Pointer Register -AT91C_US0_RPR EQU (0xFFFC0100) ;- (PDC_US0) Receive Pointer Register -AT91C_US0_PTSR EQU (0xFFFC0124) ;- (PDC_US0) PDC Transfer Status Register -AT91C_US0_TNCR EQU (0xFFFC011C) ;- (PDC_US0) Transmit Next Counter Register -AT91C_US0_RNCR EQU (0xFFFC0114) ;- (PDC_US0) Receive Next Counter Register -AT91C_US0_TCR EQU (0xFFFC010C) ;- (PDC_US0) Transmit Counter Register -AT91C_US0_RCR EQU (0xFFFC0104) ;- (PDC_US0) Receive Counter Register -;- ========== Register definition for US0 peripheral ========== -AT91C_US0_TTGR EQU (0xFFFC0028) ;- (US0) Transmitter Time-guard Register -AT91C_US0_BRGR EQU (0xFFFC0020) ;- (US0) Baud Rate Generator Register -AT91C_US0_RHR EQU (0xFFFC0018) ;- (US0) Receiver Holding Register -AT91C_US0_IMR EQU (0xFFFC0010) ;- (US0) Interrupt Mask Register -AT91C_US0_NER EQU (0xFFFC0044) ;- (US0) Nb Errors Register -AT91C_US0_RTOR EQU (0xFFFC0024) ;- (US0) Receiver Time-out Register -AT91C_US0_XXR EQU (0xFFFC0048) ;- (US0) XON_XOFF Register -AT91C_US0_FIDI EQU (0xFFFC0040) ;- (US0) FI_DI_Ratio Register -AT91C_US0_CR EQU (0xFFFC0000) ;- (US0) Control Register -AT91C_US0_IER EQU (0xFFFC0008) ;- (US0) Interrupt Enable Register -AT91C_US0_IF EQU (0xFFFC004C) ;- (US0) IRDA_FILTER Register -AT91C_US0_MR EQU (0xFFFC0004) ;- (US0) Mode Register -AT91C_US0_IDR EQU (0xFFFC000C) ;- (US0) Interrupt Disable Register -AT91C_US0_CSR EQU (0xFFFC0014) ;- (US0) Channel Status Register -AT91C_US0_THR EQU (0xFFFC001C) ;- (US0) Transmitter Holding Register -;- ========== Register definition for TWI peripheral ========== -AT91C_TWI_RHR EQU (0xFFFB8030) ;- (TWI) Receive Holding Register -AT91C_TWI_IDR EQU (0xFFFB8028) ;- (TWI) Interrupt Disable Register -AT91C_TWI_SR EQU (0xFFFB8020) ;- (TWI) Status Register -AT91C_TWI_CWGR EQU (0xFFFB8010) ;- (TWI) Clock Waveform Generator Register -AT91C_TWI_SMR EQU (0xFFFB8008) ;- (TWI) Slave Mode Register -AT91C_TWI_CR EQU (0xFFFB8000) ;- (TWI) Control Register -AT91C_TWI_THR EQU (0xFFFB8034) ;- (TWI) Transmit Holding Register -AT91C_TWI_IMR EQU (0xFFFB802C) ;- (TWI) Interrupt Mask Register -AT91C_TWI_IER EQU (0xFFFB8024) ;- (TWI) Interrupt Enable Register -AT91C_TWI_IADR EQU (0xFFFB800C) ;- (TWI) Internal Address Register -AT91C_TWI_MMR EQU (0xFFFB8004) ;- (TWI) Master Mode Register -;- ========== Register definition for PDC_MCI peripheral ========== -AT91C_MCI_PTCR EQU (0xFFFB4120) ;- (PDC_MCI) PDC Transfer Control Register -AT91C_MCI_TNPR EQU (0xFFFB4118) ;- (PDC_MCI) Transmit Next Pointer Register -AT91C_MCI_RNPR EQU (0xFFFB4110) ;- (PDC_MCI) Receive Next Pointer Register -AT91C_MCI_TPR EQU (0xFFFB4108) ;- (PDC_MCI) Transmit Pointer Register -AT91C_MCI_RPR EQU (0xFFFB4100) ;- (PDC_MCI) Receive Pointer Register -AT91C_MCI_PTSR EQU (0xFFFB4124) ;- (PDC_MCI) PDC Transfer Status Register -AT91C_MCI_TNCR EQU (0xFFFB411C) ;- (PDC_MCI) Transmit Next Counter Register -AT91C_MCI_RNCR EQU (0xFFFB4114) ;- (PDC_MCI) Receive Next Counter Register -AT91C_MCI_TCR EQU (0xFFFB410C) ;- (PDC_MCI) Transmit Counter Register -AT91C_MCI_RCR EQU (0xFFFB4104) ;- (PDC_MCI) Receive Counter Register -;- ========== Register definition for MCI peripheral ========== -AT91C_MCI_IDR EQU (0xFFFB4048) ;- (MCI) MCI Interrupt Disable Register -AT91C_MCI_SR EQU (0xFFFB4040) ;- (MCI) MCI Status Register -AT91C_MCI_RDR EQU (0xFFFB4030) ;- (MCI) MCI Receive Data Register -AT91C_MCI_RSPR EQU (0xFFFB4020) ;- (MCI) MCI Response Register -AT91C_MCI_ARGR EQU (0xFFFB4010) ;- (MCI) MCI Argument Register -AT91C_MCI_DTOR EQU (0xFFFB4008) ;- (MCI) MCI Data Timeout Register -AT91C_MCI_CR EQU (0xFFFB4000) ;- (MCI) MCI Control Register -AT91C_MCI_IMR EQU (0xFFFB404C) ;- (MCI) MCI Interrupt Mask Register -AT91C_MCI_IER EQU (0xFFFB4044) ;- (MCI) MCI Interrupt Enable Register -AT91C_MCI_TDR EQU (0xFFFB4034) ;- (MCI) MCI Transmit Data Register -AT91C_MCI_CMDR EQU (0xFFFB4014) ;- (MCI) MCI Command Register -AT91C_MCI_SDCR EQU (0xFFFB400C) ;- (MCI) MCI SD Card Register -AT91C_MCI_MR EQU (0xFFFB4004) ;- (MCI) MCI Mode Register -;- ========== Register definition for UDP peripheral ========== -AT91C_UDP_ISR EQU (0xFFFB001C) ;- (UDP) Interrupt Status Register -AT91C_UDP_IDR EQU (0xFFFB0014) ;- (UDP) Interrupt Disable Register -AT91C_UDP_GLBSTATE EQU (0xFFFB0004) ;- (UDP) Global State Register -AT91C_UDP_FDR EQU (0xFFFB0050) ;- (UDP) Endpoint FIFO Data Register -AT91C_UDP_CSR EQU (0xFFFB0030) ;- (UDP) Endpoint Control and Status Register -AT91C_UDP_RSTEP EQU (0xFFFB0028) ;- (UDP) Reset Endpoint Register -AT91C_UDP_ICR EQU (0xFFFB0020) ;- (UDP) Interrupt Clear Register -AT91C_UDP_IMR EQU (0xFFFB0018) ;- (UDP) Interrupt Mask Register -AT91C_UDP_IER EQU (0xFFFB0010) ;- (UDP) Interrupt Enable Register -AT91C_UDP_FADDR EQU (0xFFFB0008) ;- (UDP) Function Address Register -AT91C_UDP_NUM EQU (0xFFFB0000) ;- (UDP) Frame Number Register -;- ========== Register definition for TC5 peripheral ========== -AT91C_TC5_CMR EQU (0xFFFA4084) ;- (TC5) Channel Mode Register -AT91C_TC5_IDR EQU (0xFFFA40A8) ;- (TC5) Interrupt Disable Register -AT91C_TC5_SR EQU (0xFFFA40A0) ;- (TC5) Status Register -AT91C_TC5_RB EQU (0xFFFA4098) ;- (TC5) Register B -AT91C_TC5_CV EQU (0xFFFA4090) ;- (TC5) Counter Value -AT91C_TC5_CCR EQU (0xFFFA4080) ;- (TC5) Channel Control Register -AT91C_TC5_IMR EQU (0xFFFA40AC) ;- (TC5) Interrupt Mask Register -AT91C_TC5_IER EQU (0xFFFA40A4) ;- (TC5) Interrupt Enable Register -AT91C_TC5_RC EQU (0xFFFA409C) ;- (TC5) Register C -AT91C_TC5_RA EQU (0xFFFA4094) ;- (TC5) Register A -;- ========== Register definition for TC4 peripheral ========== -AT91C_TC4_IMR EQU (0xFFFA406C) ;- (TC4) Interrupt Mask Register -AT91C_TC4_IER EQU (0xFFFA4064) ;- (TC4) Interrupt Enable Register -AT91C_TC4_RC EQU (0xFFFA405C) ;- (TC4) Register C -AT91C_TC4_RA EQU (0xFFFA4054) ;- (TC4) Register A -AT91C_TC4_CMR EQU (0xFFFA4044) ;- (TC4) Channel Mode Register -AT91C_TC4_IDR EQU (0xFFFA4068) ;- (TC4) Interrupt Disable Register -AT91C_TC4_SR EQU (0xFFFA4060) ;- (TC4) Status Register -AT91C_TC4_RB EQU (0xFFFA4058) ;- (TC4) Register B -AT91C_TC4_CV EQU (0xFFFA4050) ;- (TC4) Counter Value -AT91C_TC4_CCR EQU (0xFFFA4040) ;- (TC4) Channel Control Register -;- ========== Register definition for TC3 peripheral ========== -AT91C_TC3_IMR EQU (0xFFFA402C) ;- (TC3) Interrupt Mask Register -AT91C_TC3_CV EQU (0xFFFA4010) ;- (TC3) Counter Value -AT91C_TC3_CCR EQU (0xFFFA4000) ;- (TC3) Channel Control Register -AT91C_TC3_IER EQU (0xFFFA4024) ;- (TC3) Interrupt Enable Register -AT91C_TC3_CMR EQU (0xFFFA4004) ;- (TC3) Channel Mode Register -AT91C_TC3_RA EQU (0xFFFA4014) ;- (TC3) Register A -AT91C_TC3_RC EQU (0xFFFA401C) ;- (TC3) Register C -AT91C_TC3_IDR EQU (0xFFFA4028) ;- (TC3) Interrupt Disable Register -AT91C_TC3_RB EQU (0xFFFA4018) ;- (TC3) Register B -AT91C_TC3_SR EQU (0xFFFA4020) ;- (TC3) Status Register -;- ========== Register definition for TCB1 peripheral ========== -AT91C_TCB1_BCR EQU (0xFFFA4140) ;- (TCB1) TC Block Control Register -AT91C_TCB1_BMR EQU (0xFFFA4144) ;- (TCB1) TC Block Mode Register -;- ========== Register definition for TC2 peripheral ========== -AT91C_TC2_IMR EQU (0xFFFA00AC) ;- (TC2) Interrupt Mask Register -AT91C_TC2_IER EQU (0xFFFA00A4) ;- (TC2) Interrupt Enable Register -AT91C_TC2_RC EQU (0xFFFA009C) ;- (TC2) Register C -AT91C_TC2_RA EQU (0xFFFA0094) ;- (TC2) Register A -AT91C_TC2_CMR EQU (0xFFFA0084) ;- (TC2) Channel Mode Register -AT91C_TC2_IDR EQU (0xFFFA00A8) ;- (TC2) Interrupt Disable Register -AT91C_TC2_SR EQU (0xFFFA00A0) ;- (TC2) Status Register -AT91C_TC2_RB EQU (0xFFFA0098) ;- (TC2) Register B -AT91C_TC2_CV EQU (0xFFFA0090) ;- (TC2) Counter Value -AT91C_TC2_CCR EQU (0xFFFA0080) ;- (TC2) Channel Control Register -;- ========== Register definition for TC1 peripheral ========== -AT91C_TC1_IMR EQU (0xFFFA006C) ;- (TC1) Interrupt Mask Register -AT91C_TC1_IER EQU (0xFFFA0064) ;- (TC1) Interrupt Enable Register -AT91C_TC1_RC EQU (0xFFFA005C) ;- (TC1) Register C -AT91C_TC1_RA EQU (0xFFFA0054) ;- (TC1) Register A -AT91C_TC1_CMR EQU (0xFFFA0044) ;- (TC1) Channel Mode Register -AT91C_TC1_IDR EQU (0xFFFA0068) ;- (TC1) Interrupt Disable Register -AT91C_TC1_SR EQU (0xFFFA0060) ;- (TC1) Status Register -AT91C_TC1_RB EQU (0xFFFA0058) ;- (TC1) Register B -AT91C_TC1_CV EQU (0xFFFA0050) ;- (TC1) Counter Value -AT91C_TC1_CCR EQU (0xFFFA0040) ;- (TC1) Channel Control Register -;- ========== Register definition for TC0 peripheral ========== -AT91C_TC0_IMR EQU (0xFFFA002C) ;- (TC0) Interrupt Mask Register -AT91C_TC0_IER EQU (0xFFFA0024) ;- (TC0) Interrupt Enable Register -AT91C_TC0_RC EQU (0xFFFA001C) ;- (TC0) Register C -AT91C_TC0_RA EQU (0xFFFA0014) ;- (TC0) Register A -AT91C_TC0_CMR EQU (0xFFFA0004) ;- (TC0) Channel Mode Register -AT91C_TC0_IDR EQU (0xFFFA0028) ;- (TC0) Interrupt Disable Register -AT91C_TC0_SR EQU (0xFFFA0020) ;- (TC0) Status Register -AT91C_TC0_RB EQU (0xFFFA0018) ;- (TC0) Register B -AT91C_TC0_CV EQU (0xFFFA0010) ;- (TC0) Counter Value -AT91C_TC0_CCR EQU (0xFFFA0000) ;- (TC0) Channel Control Register -;- ========== Register definition for TCB0 peripheral ========== -AT91C_TCB0_BMR EQU (0xFFFA00C4) ;- (TCB0) TC Block Mode Register -AT91C_TCB0_BCR EQU (0xFFFA00C0) ;- (TCB0) TC Block Control Register -;- ========== Register definition for UHP peripheral ========== -AT91C_UHP_HcRhDescriptorA EQU (0x00300048) ;- (UHP) Root Hub characteristics A -AT91C_UHP_HcRhPortStatus EQU (0x00300054) ;- (UHP) Root Hub Port Status Register -AT91C_UHP_HcRhDescriptorB EQU (0x0030004C) ;- (UHP) Root Hub characteristics B -AT91C_UHP_HcControl EQU (0x00300004) ;- (UHP) Operating modes for the Host Controller -AT91C_UHP_HcInterruptStatus EQU (0x0030000C) ;- (UHP) Interrupt Status Register -AT91C_UHP_HcRhStatus EQU (0x00300050) ;- (UHP) Root Hub Status register -AT91C_UHP_HcRevision EQU (0x00300000) ;- (UHP) Revision -AT91C_UHP_HcCommandStatus EQU (0x00300008) ;- (UHP) Command & status Register -AT91C_UHP_HcInterruptEnable EQU (0x00300010) ;- (UHP) Interrupt Enable Register -AT91C_UHP_HcHCCA EQU (0x00300018) ;- (UHP) Pointer to the Host Controller Communication Area -AT91C_UHP_HcControlHeadED EQU (0x00300020) ;- (UHP) First Endpoint Descriptor of the Control list -AT91C_UHP_HcInterruptDisable EQU (0x00300014) ;- (UHP) Interrupt Disable Register -AT91C_UHP_HcPeriodCurrentED EQU (0x0030001C) ;- (UHP) Current Isochronous or Interrupt Endpoint Descriptor -AT91C_UHP_HcControlCurrentED EQU (0x00300024) ;- (UHP) Endpoint Control and Status Register -AT91C_UHP_HcBulkCurrentED EQU (0x0030002C) ;- (UHP) Current endpoint of the Bulk list -AT91C_UHP_HcFmInterval EQU (0x00300034) ;- (UHP) Bit time between 2 consecutive SOFs -AT91C_UHP_HcBulkHeadED EQU (0x00300028) ;- (UHP) First endpoint register of the Bulk list -AT91C_UHP_HcBulkDoneHead EQU (0x00300030) ;- (UHP) Last completed transfer descriptor -AT91C_UHP_HcFmRemaining EQU (0x00300038) ;- (UHP) Bit time remaining in the current Frame -AT91C_UHP_HcPeriodicStart EQU (0x00300040) ;- (UHP) Periodic Start -AT91C_UHP_HcLSThreshold EQU (0x00300044) ;- (UHP) LS Threshold -AT91C_UHP_HcFmNumber EQU (0x0030003C) ;- (UHP) Frame number -;- ========== Register definition for EMAC peripheral ========== -AT91C_EMAC_RSR EQU (0xFFFBC020) ;- (EMAC) Receive Status Register -AT91C_EMAC_MAN EQU (0xFFFBC034) ;- (EMAC) PHY Maintenance Register -AT91C_EMAC_HSH EQU (0xFFFBC090) ;- (EMAC) Hash Address High[63:32] -AT91C_EMAC_MCOL EQU (0xFFFBC048) ;- (EMAC) Multiple Collision Frame Register -AT91C_EMAC_IER EQU (0xFFFBC028) ;- (EMAC) Interrupt Enable Register -AT91C_EMAC_SA2H EQU (0xFFFBC0A4) ;- (EMAC) Specific Address 2 High, Last 2 bytes -AT91C_EMAC_HSL EQU (0xFFFBC094) ;- (EMAC) Hash Address Low[31:0] -AT91C_EMAC_LCOL EQU (0xFFFBC05C) ;- (EMAC) Late Collision Register -AT91C_EMAC_OK EQU (0xFFFBC04C) ;- (EMAC) Frames Received OK Register -AT91C_EMAC_CFG EQU (0xFFFBC004) ;- (EMAC) Network Configuration Register -AT91C_EMAC_SA3L EQU (0xFFFBC0A8) ;- (EMAC) Specific Address 3 Low, First 4 bytes -AT91C_EMAC_SEQE EQU (0xFFFBC050) ;- (EMAC) Frame Check Sequence Error Register -AT91C_EMAC_ECOL EQU (0xFFFBC060) ;- (EMAC) Excessive Collision Register -AT91C_EMAC_ELR EQU (0xFFFBC070) ;- (EMAC) Excessive Length Error Register -AT91C_EMAC_SR EQU (0xFFFBC008) ;- (EMAC) Network Status Register -AT91C_EMAC_RBQP EQU (0xFFFBC018) ;- (EMAC) Receive Buffer Queue Pointer -AT91C_EMAC_CSE EQU (0xFFFBC064) ;- (EMAC) Carrier Sense Error Register -AT91C_EMAC_RJB EQU (0xFFFBC074) ;- (EMAC) Receive Jabber Register -AT91C_EMAC_USF EQU (0xFFFBC078) ;- (EMAC) Undersize Frame Register -AT91C_EMAC_IDR EQU (0xFFFBC02C) ;- (EMAC) Interrupt Disable Register -AT91C_EMAC_SA1L EQU (0xFFFBC098) ;- (EMAC) Specific Address 1 Low, First 4 bytes -AT91C_EMAC_IMR EQU (0xFFFBC030) ;- (EMAC) Interrupt Mask Register -AT91C_EMAC_FRA EQU (0xFFFBC040) ;- (EMAC) Frames Transmitted OK Register -AT91C_EMAC_SA3H EQU (0xFFFBC0AC) ;- (EMAC) Specific Address 3 High, Last 2 bytes -AT91C_EMAC_SA1H EQU (0xFFFBC09C) ;- (EMAC) Specific Address 1 High, Last 2 bytes -AT91C_EMAC_SCOL EQU (0xFFFBC044) ;- (EMAC) Single Collision Frame Register -AT91C_EMAC_ALE EQU (0xFFFBC054) ;- (EMAC) Alignment Error Register -AT91C_EMAC_TAR EQU (0xFFFBC00C) ;- (EMAC) Transmit Address Register -AT91C_EMAC_SA4L EQU (0xFFFBC0B0) ;- (EMAC) Specific Address 4 Low, First 4 bytes -AT91C_EMAC_SA2L EQU (0xFFFBC0A0) ;- (EMAC) Specific Address 2 Low, First 4 bytes -AT91C_EMAC_TUE EQU (0xFFFBC068) ;- (EMAC) Transmit Underrun Error Register -AT91C_EMAC_DTE EQU (0xFFFBC058) ;- (EMAC) Deferred Transmission Frame Register -AT91C_EMAC_TCR EQU (0xFFFBC010) ;- (EMAC) Transmit Control Register -AT91C_EMAC_CTL EQU (0xFFFBC000) ;- (EMAC) Network Control Register -AT91C_EMAC_SA4H EQU (0xFFFBC0B4) ;- (EMAC) Specific Address 4 High, Last 2 bytesr -AT91C_EMAC_CDE EQU (0xFFFBC06C) ;- (EMAC) Code Error Register -AT91C_EMAC_SQEE EQU (0xFFFBC07C) ;- (EMAC) SQE Test Error Register -AT91C_EMAC_TSR EQU (0xFFFBC014) ;- (EMAC) Transmit Status Register -AT91C_EMAC_DRFC EQU (0xFFFBC080) ;- (EMAC) Discarded RX Frame Register -;- ========== Register definition for EBI peripheral ========== -AT91C_EBI_CFGR EQU (0xFFFFFF64) ;- (EBI) Configuration Register -AT91C_EBI_CSA EQU (0xFFFFFF60) ;- (EBI) Chip Select Assignment Register -;- ========== Register definition for SMC2 peripheral ========== -AT91C_SMC2_CSR EQU (0xFFFFFF70) ;- (SMC2) SMC2 Chip Select Register -;- ========== Register definition for SDRC peripheral ========== -AT91C_SDRC_IMR EQU (0xFFFFFFAC) ;- (SDRC) SDRAM Controller Interrupt Mask Register -AT91C_SDRC_IER EQU (0xFFFFFFA4) ;- (SDRC) SDRAM Controller Interrupt Enable Register -AT91C_SDRC_SRR EQU (0xFFFFFF9C) ;- (SDRC) SDRAM Controller Self Refresh Register -AT91C_SDRC_TR EQU (0xFFFFFF94) ;- (SDRC) SDRAM Controller Refresh Timer Register -AT91C_SDRC_ISR EQU (0xFFFFFFB0) ;- (SDRC) SDRAM Controller Interrupt Mask Register -AT91C_SDRC_IDR EQU (0xFFFFFFA8) ;- (SDRC) SDRAM Controller Interrupt Disable Register -AT91C_SDRC_LPR EQU (0xFFFFFFA0) ;- (SDRC) SDRAM Controller Low Power Register -AT91C_SDRC_CR EQU (0xFFFFFF98) ;- (SDRC) SDRAM Controller Configuration Register -AT91C_SDRC_MR EQU (0xFFFFFF90) ;- (SDRC) SDRAM Controller Mode Register -;- ========== Register definition for BFC peripheral ========== -AT91C_BFC_MR EQU (0xFFFFFFC0) ;- (BFC) BFC Mode Register - -;- ***************************************************************************** -;- PIO DEFINITIONS FOR AT91RM9200 -;- ***************************************************************************** -AT91C_PIO_PA0 EQU (1:SHL:0) ;- Pin Controlled by PA0 -AT91C_PA0_MISO EQU (AT91C_PIO_PA0) ;- SPI Master In Slave -AT91C_PA0_PCK3 EQU (AT91C_PIO_PA0) ;- PMC Programmable Clock Output 3 -AT91C_PIO_PA1 EQU (1:SHL:1) ;- Pin Controlled by PA1 -AT91C_PA1_MOSI EQU (AT91C_PIO_PA1) ;- SPI Master Out Slave -AT91C_PA1_PCK0 EQU (AT91C_PIO_PA1) ;- PMC Programmable Clock Output 0 -AT91C_PIO_PA10 EQU (1:SHL:10) ;- Pin Controlled by PA10 -AT91C_PA10_ETX1 EQU (AT91C_PIO_PA10) ;- Ethernet MAC Transmit Data 1 -AT91C_PA10_MCDB1 EQU (AT91C_PIO_PA10) ;- Multimedia Card B Data 1 -AT91C_PIO_PA11 EQU (1:SHL:11) ;- Pin Controlled by PA11 -AT91C_PA11_ECRS_ECRSDV EQU (AT91C_PIO_PA11) ;- Ethernet MAC Carrier Sense/Carrier Sense and Data Valid -AT91C_PA11_MCDB2 EQU (AT91C_PIO_PA11) ;- Multimedia Card B Data 2 -AT91C_PIO_PA12 EQU (1:SHL:12) ;- Pin Controlled by PA12 -AT91C_PA12_ERX0 EQU (AT91C_PIO_PA12) ;- Ethernet MAC Receive Data 0 -AT91C_PA12_MCDB3 EQU (AT91C_PIO_PA12) ;- Multimedia Card B Data 3 -AT91C_PIO_PA13 EQU (1:SHL:13) ;- Pin Controlled by PA13 -AT91C_PA13_ERX1 EQU (AT91C_PIO_PA13) ;- Ethernet MAC Receive Data 1 -AT91C_PA13_TCLK0 EQU (AT91C_PIO_PA13) ;- Timer Counter 0 external clock input -AT91C_PIO_PA14 EQU (1:SHL:14) ;- Pin Controlled by PA14 -AT91C_PA14_ERXER EQU (AT91C_PIO_PA14) ;- Ethernet MAC Receive Error -AT91C_PA14_TCLK1 EQU (AT91C_PIO_PA14) ;- Timer Counter 1 external clock input -AT91C_PIO_PA15 EQU (1:SHL:15) ;- Pin Controlled by PA15 -AT91C_PA15_EMDC EQU (AT91C_PIO_PA15) ;- Ethernet MAC Management Data Clock -AT91C_PA15_TCLK2 EQU (AT91C_PIO_PA15) ;- Timer Counter 2 external clock input -AT91C_PIO_PA16 EQU (1:SHL:16) ;- Pin Controlled by PA16 -AT91C_PA16_EMDIO EQU (AT91C_PIO_PA16) ;- Ethernet MAC Management Data Input/Output -AT91C_PA16_IRQ6 EQU (AT91C_PIO_PA16) ;- AIC Interrupt input 6 -AT91C_PIO_PA17 EQU (1:SHL:17) ;- Pin Controlled by PA17 -AT91C_PA17_TXD0 EQU (AT91C_PIO_PA17) ;- USART 0 Transmit Data -AT91C_PA17_TIOA0 EQU (AT91C_PIO_PA17) ;- Timer Counter 0 Multipurpose Timer I/O Pin A -AT91C_PIO_PA18 EQU (1:SHL:18) ;- Pin Controlled by PA18 -AT91C_PA18_RXD0 EQU (AT91C_PIO_PA18) ;- USART 0 Receive Data -AT91C_PA18_TIOB0 EQU (AT91C_PIO_PA18) ;- Timer Counter 0 Multipurpose Timer I/O Pin B -AT91C_PIO_PA19 EQU (1:SHL:19) ;- Pin Controlled by PA19 -AT91C_PA19_SCK0 EQU (AT91C_PIO_PA19) ;- USART 0 Serial Clock -AT91C_PA19_TIOA1 EQU (AT91C_PIO_PA19) ;- Timer Counter 1 Multipurpose Timer I/O Pin A -AT91C_PIO_PA2 EQU (1:SHL:2) ;- Pin Controlled by PA2 -AT91C_PA2_SPCK EQU (AT91C_PIO_PA2) ;- SPI Serial Clock -AT91C_PA2_IRQ4 EQU (AT91C_PIO_PA2) ;- AIC Interrupt Input 4 -AT91C_PIO_PA20 EQU (1:SHL:20) ;- Pin Controlled by PA20 -AT91C_PA20_CTS0 EQU (AT91C_PIO_PA20) ;- USART 0 Clear To Send -AT91C_PA20_TIOB1 EQU (AT91C_PIO_PA20) ;- Timer Counter 1 Multipurpose Timer I/O Pin B -AT91C_PIO_PA21 EQU (1:SHL:21) ;- Pin Controlled by PA21 -AT91C_PA21_RTS0 EQU (AT91C_PIO_PA21) ;- Usart 0 Ready To Send -AT91C_PA21_TIOA2 EQU (AT91C_PIO_PA21) ;- Timer Counter 2 Multipurpose Timer I/O Pin A -AT91C_PIO_PA22 EQU (1:SHL:22) ;- Pin Controlled by PA22 -AT91C_PA22_RXD2 EQU (AT91C_PIO_PA22) ;- USART 2 Receive Data -AT91C_PA22_TIOB2 EQU (AT91C_PIO_PA22) ;- Timer Counter 2 Multipurpose Timer I/O Pin B -AT91C_PIO_PA23 EQU (1:SHL:23) ;- Pin Controlled by PA23 -AT91C_PA23_TXD2 EQU (AT91C_PIO_PA23) ;- USART 2 Transmit Data -AT91C_PA23_IRQ3 EQU (AT91C_PIO_PA23) ;- Interrupt input 3 -AT91C_PIO_PA24 EQU (1:SHL:24) ;- Pin Controlled by PA24 -AT91C_PA24_SCK2 EQU (AT91C_PIO_PA24) ;- USART2 Serial Clock -AT91C_PA24_PCK1 EQU (AT91C_PIO_PA24) ;- PMC Programmable Clock Output 1 -AT91C_PIO_PA25 EQU (1:SHL:25) ;- Pin Controlled by PA25 -AT91C_PA25_TWD EQU (AT91C_PIO_PA25) ;- TWI Two-wire Serial Data -AT91C_PA25_IRQ2 EQU (AT91C_PIO_PA25) ;- Interrupt input 2 -AT91C_PIO_PA26 EQU (1:SHL:26) ;- Pin Controlled by PA26 -AT91C_PA26_TWCK EQU (AT91C_PIO_PA26) ;- TWI Two-wire Serial Clock -AT91C_PA26_IRQ1 EQU (AT91C_PIO_PA26) ;- Interrupt input 1 -AT91C_PIO_PA27 EQU (1:SHL:27) ;- Pin Controlled by PA27 -AT91C_PA27_MCCK EQU (AT91C_PIO_PA27) ;- Multimedia Card Clock -AT91C_PA27_TCLK3 EQU (AT91C_PIO_PA27) ;- Timer Counter 3 External Clock Input -AT91C_PIO_PA28 EQU (1:SHL:28) ;- Pin Controlled by PA28 -AT91C_PA28_MCCDA EQU (AT91C_PIO_PA28) ;- Multimedia Card A Command -AT91C_PA28_TCLK4 EQU (AT91C_PIO_PA28) ;- Timer Counter 4 external Clock Input -AT91C_PIO_PA29 EQU (1:SHL:29) ;- Pin Controlled by PA29 -AT91C_PA29_MCDA0 EQU (AT91C_PIO_PA29) ;- Multimedia Card A Data 0 -AT91C_PA29_TCLK5 EQU (AT91C_PIO_PA29) ;- Timer Counter 5 external clock input -AT91C_PIO_PA3 EQU (1:SHL:3) ;- Pin Controlled by PA3 -AT91C_PA3_NPCS0 EQU (AT91C_PIO_PA3) ;- SPI Peripheral Chip Select 0 -AT91C_PA3_IRQ5 EQU (AT91C_PIO_PA3) ;- AIC Interrupt Input 5 -AT91C_PIO_PA30 EQU (1:SHL:30) ;- Pin Controlled by PA30 -AT91C_PA30_DRXD EQU (AT91C_PIO_PA30) ;- DBGU Debug Receive Data -AT91C_PA30_CTS2 EQU (AT91C_PIO_PA30) ;- Usart 2 Clear To Send -AT91C_PIO_PA31 EQU (1:SHL:31) ;- Pin Controlled by PA31 -AT91C_PA31_DTXD EQU (AT91C_PIO_PA31) ;- DBGU Debug Transmit Data -AT91C_PA31_RTS2 EQU (AT91C_PIO_PA31) ;- USART 2 Ready To Send -AT91C_PIO_PA4 EQU (1:SHL:4) ;- Pin Controlled by PA4 -AT91C_PA4_NPCS1 EQU (AT91C_PIO_PA4) ;- SPI Peripheral Chip Select 1 -AT91C_PA4_PCK1 EQU (AT91C_PIO_PA4) ;- PMC Programmable Clock Output 1 -AT91C_PIO_PA5 EQU (1:SHL:5) ;- Pin Controlled by PA5 -AT91C_PA5_NPCS2 EQU (AT91C_PIO_PA5) ;- SPI Peripheral Chip Select 2 -AT91C_PA5_TXD3 EQU (AT91C_PIO_PA5) ;- USART 3 Transmit Data -AT91C_PIO_PA6 EQU (1:SHL:6) ;- Pin Controlled by PA6 -AT91C_PA6_NPCS3 EQU (AT91C_PIO_PA6) ;- SPI Peripheral Chip Select 3 -AT91C_PA6_RXD3 EQU (AT91C_PIO_PA6) ;- USART 3 Receive Data -AT91C_PIO_PA7 EQU (1:SHL:7) ;- Pin Controlled by PA7 -AT91C_PA7_ETXCK_EREFCK EQU (AT91C_PIO_PA7) ;- Ethernet MAC Transmit Clock/Reference Clock -AT91C_PA7_PCK2 EQU (AT91C_PIO_PA7) ;- PMC Programmable Clock 2 -AT91C_PIO_PA8 EQU (1:SHL:8) ;- Pin Controlled by PA8 -AT91C_PA8_ETXEN EQU (AT91C_PIO_PA8) ;- Ethernet MAC Transmit Enable -AT91C_PA8_MCCDB EQU (AT91C_PIO_PA8) ;- Multimedia Card B Command -AT91C_PIO_PA9 EQU (1:SHL:9) ;- Pin Controlled by PA9 -AT91C_PA9_ETX0 EQU (AT91C_PIO_PA9) ;- Ethernet MAC Transmit Data 0 -AT91C_PA9_MCDB0 EQU (AT91C_PIO_PA9) ;- Multimedia Card B Data 0 -AT91C_PIO_PB0 EQU (1:SHL:0) ;- Pin Controlled by PB0 -AT91C_PB0_TF0 EQU (AT91C_PIO_PB0) ;- SSC Transmit Frame Sync 0 -AT91C_PB0_TIOB3 EQU (AT91C_PIO_PB0) ;- Timer Counter 3 Multipurpose Timer I/O Pin B -AT91C_PIO_PB1 EQU (1:SHL:1) ;- Pin Controlled by PB1 -AT91C_PB1_TK0 EQU (AT91C_PIO_PB1) ;- SSC Transmit Clock 0 -AT91C_PB1_CTS3 EQU (AT91C_PIO_PB1) ;- USART 3 Clear To Send -AT91C_PIO_PB10 EQU (1:SHL:10) ;- Pin Controlled by PB10 -AT91C_PB10_RK1 EQU (AT91C_PIO_PB10) ;- SSC Receive Clock 1 -AT91C_PB10_TIOA5 EQU (AT91C_PIO_PB10) ;- Timer Counter 5 Multipurpose Timer I/O Pin A -AT91C_PIO_PB11 EQU (1:SHL:11) ;- Pin Controlled by PB11 -AT91C_PB11_RF1 EQU (AT91C_PIO_PB11) ;- SSC Receive Frame Sync 1 -AT91C_PB11_TIOB5 EQU (AT91C_PIO_PB11) ;- Timer Counter 5 Multipurpose Timer I/O Pin B -AT91C_PIO_PB12 EQU (1:SHL:12) ;- Pin Controlled by PB12 -AT91C_PB12_TF2 EQU (AT91C_PIO_PB12) ;- SSC Transmit Frame Sync 2 -AT91C_PB12_ETX2 EQU (AT91C_PIO_PB12) ;- Ethernet MAC Transmit Data 2 -AT91C_PIO_PB13 EQU (1:SHL:13) ;- Pin Controlled by PB13 -AT91C_PB13_TK2 EQU (AT91C_PIO_PB13) ;- SSC Transmit Clock 2 -AT91C_PB13_ETX3 EQU (AT91C_PIO_PB13) ;- Ethernet MAC Transmit Data 3 -AT91C_PIO_PB14 EQU (1:SHL:14) ;- Pin Controlled by PB14 -AT91C_PB14_TD2 EQU (AT91C_PIO_PB14) ;- SSC Transmit Data 2 -AT91C_PB14_ETXER EQU (AT91C_PIO_PB14) ;- Ethernet MAC Transmikt Coding Error -AT91C_PIO_PB15 EQU (1:SHL:15) ;- Pin Controlled by PB15 -AT91C_PB15_RD2 EQU (AT91C_PIO_PB15) ;- SSC Receive Data 2 -AT91C_PB15_ERX2 EQU (AT91C_PIO_PB15) ;- Ethernet MAC Receive Data 2 -AT91C_PIO_PB16 EQU (1:SHL:16) ;- Pin Controlled by PB16 -AT91C_PB16_RK2 EQU (AT91C_PIO_PB16) ;- SSC Receive Clock 2 -AT91C_PB16_ERX3 EQU (AT91C_PIO_PB16) ;- Ethernet MAC Receive Data 3 -AT91C_PIO_PB17 EQU (1:SHL:17) ;- Pin Controlled by PB17 -AT91C_PB17_RF2 EQU (AT91C_PIO_PB17) ;- SSC Receive Frame Sync 2 -AT91C_PB17_ERXDV EQU (AT91C_PIO_PB17) ;- Ethernet MAC Receive Data Valid -AT91C_PIO_PB18 EQU (1:SHL:18) ;- Pin Controlled by PB18 -AT91C_PB18_RI1 EQU (AT91C_PIO_PB18) ;- USART 1 Ring Indicator -AT91C_PB18_ECOL EQU (AT91C_PIO_PB18) ;- Ethernet MAC Collision Detected -AT91C_PIO_PB19 EQU (1:SHL:19) ;- Pin Controlled by PB19 -AT91C_PB19_DTR1 EQU (AT91C_PIO_PB19) ;- USART 1 Data Terminal ready -AT91C_PB19_ERXCK EQU (AT91C_PIO_PB19) ;- Ethernet MAC Receive Clock -AT91C_PIO_PB2 EQU (1:SHL:2) ;- Pin Controlled by PB2 -AT91C_PB2_TD0 EQU (AT91C_PIO_PB2) ;- SSC Transmit data -AT91C_PB2_SCK3 EQU (AT91C_PIO_PB2) ;- USART 3 Serial Clock -AT91C_PIO_PB20 EQU (1:SHL:20) ;- Pin Controlled by PB20 -AT91C_PB20_TXD1 EQU (AT91C_PIO_PB20) ;- USART 1 Transmit Data -AT91C_PIO_PB21 EQU (1:SHL:21) ;- Pin Controlled by PB21 -AT91C_PB21_RXD1 EQU (AT91C_PIO_PB21) ;- USART 1 Receive Data -AT91C_PIO_PB22 EQU (1:SHL:22) ;- Pin Controlled by PB22 -AT91C_PB22_SCK1 EQU (AT91C_PIO_PB22) ;- USART1 Serial Clock -AT91C_PIO_PB23 EQU (1:SHL:23) ;- Pin Controlled by PB23 -AT91C_PB23_DCD1 EQU (AT91C_PIO_PB23) ;- USART 1 Data Carrier Detect -AT91C_PIO_PB24 EQU (1:SHL:24) ;- Pin Controlled by PB24 -AT91C_PB24_CTS1 EQU (AT91C_PIO_PB24) ;- USART 1 Clear To Send -AT91C_PIO_PB25 EQU (1:SHL:25) ;- Pin Controlled by PB25 -AT91C_PB25_DSR1 EQU (AT91C_PIO_PB25) ;- USART 1 Data Set ready -AT91C_PB25_EF100 EQU (AT91C_PIO_PB25) ;- Ethernet MAC Force 100 Mbits/sec -AT91C_PIO_PB26 EQU (1:SHL:26) ;- Pin Controlled by PB26 -AT91C_PB26_RTS1 EQU (AT91C_PIO_PB26) ;- Usart 0 Ready To Send -AT91C_PIO_PB27 EQU (1:SHL:27) ;- Pin Controlled by PB27 -AT91C_PB27_PCK0 EQU (AT91C_PIO_PB27) ;- PMC Programmable Clock Output 0 -AT91C_PIO_PB28 EQU (1:SHL:28) ;- Pin Controlled by PB28 -AT91C_PB28_FIQ EQU (AT91C_PIO_PB28) ;- AIC Fast Interrupt Input -AT91C_PIO_PB29 EQU (1:SHL:29) ;- Pin Controlled by PB29 -AT91C_PB29_IRQ0 EQU (AT91C_PIO_PB29) ;- Interrupt input 0 -AT91C_PIO_PB3 EQU (1:SHL:3) ;- Pin Controlled by PB3 -AT91C_PB3_RD0 EQU (AT91C_PIO_PB3) ;- SSC Receive Data -AT91C_PB3_MCDA1 EQU (AT91C_PIO_PB3) ;- Multimedia Card A Data 1 -AT91C_PIO_PB4 EQU (1:SHL:4) ;- Pin Controlled by PB4 -AT91C_PB4_RK0 EQU (AT91C_PIO_PB4) ;- SSC Receive Clock -AT91C_PB4_MCDA2 EQU (AT91C_PIO_PB4) ;- Multimedia Card A Data 2 -AT91C_PIO_PB5 EQU (1:SHL:5) ;- Pin Controlled by PB5 -AT91C_PB5_RF0 EQU (AT91C_PIO_PB5) ;- SSC Receive Frame Sync 0 -AT91C_PB5_MCDA3 EQU (AT91C_PIO_PB5) ;- Multimedia Card A Data 3 -AT91C_PIO_PB6 EQU (1:SHL:6) ;- Pin Controlled by PB6 -AT91C_PB6_TF1 EQU (AT91C_PIO_PB6) ;- SSC Transmit Frame Sync 1 -AT91C_PB6_TIOA3 EQU (AT91C_PIO_PB6) ;- Timer Counter 4 Multipurpose Timer I/O Pin A -AT91C_PIO_PB7 EQU (1:SHL:7) ;- Pin Controlled by PB7 -AT91C_PB7_TK1 EQU (AT91C_PIO_PB7) ;- SSC Transmit Clock 1 -AT91C_PB7_TIOB3 EQU (AT91C_PIO_PB7) ;- Timer Counter 3 Multipurpose Timer I/O Pin B -AT91C_PIO_PB8 EQU (1:SHL:8) ;- Pin Controlled by PB8 -AT91C_PB8_TD1 EQU (AT91C_PIO_PB8) ;- SSC Transmit Data 1 -AT91C_PB8_TIOA4 EQU (AT91C_PIO_PB8) ;- Timer Counter 4 Multipurpose Timer I/O Pin A -AT91C_PIO_PB9 EQU (1:SHL:9) ;- Pin Controlled by PB9 -AT91C_PB9_RD1 EQU (AT91C_PIO_PB9) ;- SSC Receive Data 1 -AT91C_PB9_TIOB4 EQU (AT91C_PIO_PB9) ;- Timer Counter 4 Multipurpose Timer I/O Pin B -AT91C_PIO_PC0 EQU (1:SHL:0) ;- Pin Controlled by PC0 -AT91C_PC0_BFCK EQU (AT91C_PIO_PC0) ;- Burst Flash Clock -AT91C_PIO_PC1 EQU (1:SHL:1) ;- Pin Controlled by PC1 -AT91C_PC1_BFRDY_SMOE EQU (AT91C_PIO_PC1) ;- Burst Flash Ready -AT91C_PIO_PC10 EQU (1:SHL:10) ;- Pin Controlled by PC10 -AT91C_PC10_NCS4_CFCS EQU (AT91C_PIO_PC10) ;- Compact Flash Chip Select -AT91C_PIO_PC11 EQU (1:SHL:11) ;- Pin Controlled by PC11 -AT91C_PC11_NCS5_CFCE1 EQU (AT91C_PIO_PC11) ;- Chip Select 5 / Compact Flash Chip Enable 1 -AT91C_PIO_PC12 EQU (1:SHL:12) ;- Pin Controlled by PC12 -AT91C_PC12_NCS6_CFCE2 EQU (AT91C_PIO_PC12) ;- Chip Select 6 / Compact Flash Chip Enable 2 -AT91C_PIO_PC13 EQU (1:SHL:13) ;- Pin Controlled by PC13 -AT91C_PC13_NCS7 EQU (AT91C_PIO_PC13) ;- Chip Select 7 -AT91C_PIO_PC14 EQU (1:SHL:14) ;- Pin Controlled by PC14 -AT91C_PIO_PC15 EQU (1:SHL:15) ;- Pin Controlled by PC15 -AT91C_PIO_PC16 EQU (1:SHL:16) ;- Pin Controlled by PC16 -AT91C_PC16_D16 EQU (AT91C_PIO_PC16) ;- Data Bus [16] -AT91C_PIO_PC17 EQU (1:SHL:17) ;- Pin Controlled by PC17 -AT91C_PC17_D17 EQU (AT91C_PIO_PC17) ;- Data Bus [17] -AT91C_PIO_PC18 EQU (1:SHL:18) ;- Pin Controlled by PC18 -AT91C_PC18_D18 EQU (AT91C_PIO_PC18) ;- Data Bus [18] -AT91C_PIO_PC19 EQU (1:SHL:19) ;- Pin Controlled by PC19 -AT91C_PC19_D19 EQU (AT91C_PIO_PC19) ;- Data Bus [19] -AT91C_PIO_PC2 EQU (1:SHL:2) ;- Pin Controlled by PC2 -AT91C_PC2_BFAVD EQU (AT91C_PIO_PC2) ;- Burst Flash Address Valid -AT91C_PIO_PC20 EQU (1:SHL:20) ;- Pin Controlled by PC20 -AT91C_PC20_D20 EQU (AT91C_PIO_PC20) ;- Data Bus [20] -AT91C_PIO_PC21 EQU (1:SHL:21) ;- Pin Controlled by PC21 -AT91C_PC21_D21 EQU (AT91C_PIO_PC21) ;- Data Bus [21] -AT91C_PIO_PC22 EQU (1:SHL:22) ;- Pin Controlled by PC22 -AT91C_PC22_D22 EQU (AT91C_PIO_PC22) ;- Data Bus [22] -AT91C_PIO_PC23 EQU (1:SHL:23) ;- Pin Controlled by PC23 -AT91C_PC23_D23 EQU (AT91C_PIO_PC23) ;- Data Bus [23] -AT91C_PIO_PC24 EQU (1:SHL:24) ;- Pin Controlled by PC24 -AT91C_PC24_D24 EQU (AT91C_PIO_PC24) ;- Data Bus [24] -AT91C_PIO_PC25 EQU (1:SHL:25) ;- Pin Controlled by PC25 -AT91C_PC25_D25 EQU (AT91C_PIO_PC25) ;- Data Bus [25] -AT91C_PIO_PC26 EQU (1:SHL:26) ;- Pin Controlled by PC26 -AT91C_PC26_D26 EQU (AT91C_PIO_PC26) ;- Data Bus [26] -AT91C_PIO_PC27 EQU (1:SHL:27) ;- Pin Controlled by PC27 -AT91C_PC27_D27 EQU (AT91C_PIO_PC27) ;- Data Bus [27] -AT91C_PIO_PC28 EQU (1:SHL:28) ;- Pin Controlled by PC28 -AT91C_PC28_D28 EQU (AT91C_PIO_PC28) ;- Data Bus [28] -AT91C_PIO_PC29 EQU (1:SHL:29) ;- Pin Controlled by PC29 -AT91C_PC29_D29 EQU (AT91C_PIO_PC29) ;- Data Bus [29] -AT91C_PIO_PC3 EQU (1:SHL:3) ;- Pin Controlled by PC3 -AT91C_PC3_BFBAA_SMWE EQU (AT91C_PIO_PC3) ;- Burst Flash Address Advance / SmartMedia Write Enable -AT91C_PIO_PC30 EQU (1:SHL:30) ;- Pin Controlled by PC30 -AT91C_PC30_D30 EQU (AT91C_PIO_PC30) ;- Data Bus [30] -AT91C_PIO_PC31 EQU (1:SHL:31) ;- Pin Controlled by PC31 -AT91C_PC31_D31 EQU (AT91C_PIO_PC31) ;- Data Bus [31] -AT91C_PIO_PC4 EQU (1:SHL:4) ;- Pin Controlled by PC4 -AT91C_PC4_BFOE EQU (AT91C_PIO_PC4) ;- Burst Flash Output Enable -AT91C_PIO_PC5 EQU (1:SHL:5) ;- Pin Controlled by PC5 -AT91C_PC5_BFWE EQU (AT91C_PIO_PC5) ;- Burst Flash Write Enable -AT91C_PIO_PC6 EQU (1:SHL:6) ;- Pin Controlled by PC6 -AT91C_PC6_NWAIT EQU (AT91C_PIO_PC6) ;- NWAIT -AT91C_PIO_PC7 EQU (1:SHL:7) ;- Pin Controlled by PC7 -AT91C_PC7_A23 EQU (AT91C_PIO_PC7) ;- Address Bus[23] -AT91C_PIO_PC8 EQU (1:SHL:8) ;- Pin Controlled by PC8 -AT91C_PC8_A24 EQU (AT91C_PIO_PC8) ;- Address Bus[24] -AT91C_PIO_PC9 EQU (1:SHL:9) ;- Pin Controlled by PC9 -AT91C_PC9_A25_CFRNW EQU (AT91C_PIO_PC9) ;- Address Bus[25] / Compact Flash Read Not Write -AT91C_PIO_PD0 EQU (1:SHL:0) ;- Pin Controlled by PD0 -AT91C_PD0_ETX0 EQU (AT91C_PIO_PD0) ;- Ethernet MAC Transmit Data 0 -AT91C_PIO_PD1 EQU (1:SHL:1) ;- Pin Controlled by PD1 -AT91C_PD1_ETX1 EQU (AT91C_PIO_PD1) ;- Ethernet MAC Transmit Data 1 -AT91C_PIO_PD10 EQU (1:SHL:10) ;- Pin Controlled by PD10 -AT91C_PD10_PCK3 EQU (AT91C_PIO_PD10) ;- PMC Programmable Clock Output 3 -AT91C_PD10_TPS1 EQU (AT91C_PIO_PD10) ;- ETM ARM9 pipeline status 1 -AT91C_PIO_PD11 EQU (1:SHL:11) ;- Pin Controlled by PD11 -AT91C_PD11_ EQU (AT91C_PIO_PD11) ;- -AT91C_PD11_TPS2 EQU (AT91C_PIO_PD11) ;- ETM ARM9 pipeline status 2 -AT91C_PIO_PD12 EQU (1:SHL:12) ;- Pin Controlled by PD12 -AT91C_PD12_ EQU (AT91C_PIO_PD12) ;- -AT91C_PD12_TPK0 EQU (AT91C_PIO_PD12) ;- ETM Trace Packet 0 -AT91C_PIO_PD13 EQU (1:SHL:13) ;- Pin Controlled by PD13 -AT91C_PD13_ EQU (AT91C_PIO_PD13) ;- -AT91C_PD13_TPK1 EQU (AT91C_PIO_PD13) ;- ETM Trace Packet 1 -AT91C_PIO_PD14 EQU (1:SHL:14) ;- Pin Controlled by PD14 -AT91C_PD14_ EQU (AT91C_PIO_PD14) ;- -AT91C_PD14_TPK2 EQU (AT91C_PIO_PD14) ;- ETM Trace Packet 2 -AT91C_PIO_PD15 EQU (1:SHL:15) ;- Pin Controlled by PD15 -AT91C_PD15_TD0 EQU (AT91C_PIO_PD15) ;- SSC Transmit data -AT91C_PD15_TPK3 EQU (AT91C_PIO_PD15) ;- ETM Trace Packet 3 -AT91C_PIO_PD16 EQU (1:SHL:16) ;- Pin Controlled by PD16 -AT91C_PD16_TD1 EQU (AT91C_PIO_PD16) ;- SSC Transmit Data 1 -AT91C_PD16_TPK4 EQU (AT91C_PIO_PD16) ;- ETM Trace Packet 4 -AT91C_PIO_PD17 EQU (1:SHL:17) ;- Pin Controlled by PD17 -AT91C_PD17_TD2 EQU (AT91C_PIO_PD17) ;- SSC Transmit Data 2 -AT91C_PD17_TPK5 EQU (AT91C_PIO_PD17) ;- ETM Trace Packet 5 -AT91C_PIO_PD18 EQU (1:SHL:18) ;- Pin Controlled by PD18 -AT91C_PD18_NPCS1 EQU (AT91C_PIO_PD18) ;- SPI Peripheral Chip Select 1 -AT91C_PD18_TPK6 EQU (AT91C_PIO_PD18) ;- ETM Trace Packet 6 -AT91C_PIO_PD19 EQU (1:SHL:19) ;- Pin Controlled by PD19 -AT91C_PD19_NPCS2 EQU (AT91C_PIO_PD19) ;- SPI Peripheral Chip Select 2 -AT91C_PD19_TPK7 EQU (AT91C_PIO_PD19) ;- ETM Trace Packet 7 -AT91C_PIO_PD2 EQU (1:SHL:2) ;- Pin Controlled by PD2 -AT91C_PD2_ETX2 EQU (AT91C_PIO_PD2) ;- Ethernet MAC Transmit Data 2 -AT91C_PIO_PD20 EQU (1:SHL:20) ;- Pin Controlled by PD20 -AT91C_PD20_NPCS3 EQU (AT91C_PIO_PD20) ;- SPI Peripheral Chip Select 3 -AT91C_PD20_TPK8 EQU (AT91C_PIO_PD20) ;- ETM Trace Packet 8 -AT91C_PIO_PD21 EQU (1:SHL:21) ;- Pin Controlled by PD21 -AT91C_PD21_RTS0 EQU (AT91C_PIO_PD21) ;- Usart 0 Ready To Send -AT91C_PD21_TPK9 EQU (AT91C_PIO_PD21) ;- ETM Trace Packet 9 -AT91C_PIO_PD22 EQU (1:SHL:22) ;- Pin Controlled by PD22 -AT91C_PD22_RTS1 EQU (AT91C_PIO_PD22) ;- Usart 0 Ready To Send -AT91C_PD22_TPK10 EQU (AT91C_PIO_PD22) ;- ETM Trace Packet 10 -AT91C_PIO_PD23 EQU (1:SHL:23) ;- Pin Controlled by PD23 -AT91C_PD23_RTS2 EQU (AT91C_PIO_PD23) ;- USART 2 Ready To Send -AT91C_PD23_TPK11 EQU (AT91C_PIO_PD23) ;- ETM Trace Packet 11 -AT91C_PIO_PD24 EQU (1:SHL:24) ;- Pin Controlled by PD24 -AT91C_PD24_RTS3 EQU (AT91C_PIO_PD24) ;- USART 3 Ready To Send -AT91C_PD24_TPK12 EQU (AT91C_PIO_PD24) ;- ETM Trace Packet 12 -AT91C_PIO_PD25 EQU (1:SHL:25) ;- Pin Controlled by PD25 -AT91C_PD25_DTR1 EQU (AT91C_PIO_PD25) ;- USART 1 Data Terminal ready -AT91C_PD25_TPK13 EQU (AT91C_PIO_PD25) ;- ETM Trace Packet 13 -AT91C_PIO_PD26 EQU (1:SHL:26) ;- Pin Controlled by PD26 -AT91C_PD26_TPK14 EQU (AT91C_PIO_PD26) ;- ETM Trace Packet 14 -AT91C_PIO_PD27 EQU (1:SHL:27) ;- Pin Controlled by PD27 -AT91C_PD27_TPK15 EQU (AT91C_PIO_PD27) ;- ETM Trace Packet 15 -AT91C_PIO_PD3 EQU (1:SHL:3) ;- Pin Controlled by PD3 -AT91C_PD3_ETX3 EQU (AT91C_PIO_PD3) ;- Ethernet MAC Transmit Data 3 -AT91C_PIO_PD4 EQU (1:SHL:4) ;- Pin Controlled by PD4 -AT91C_PD4_ETXEN EQU (AT91C_PIO_PD4) ;- Ethernet MAC Transmit Enable -AT91C_PIO_PD5 EQU (1:SHL:5) ;- Pin Controlled by PD5 -AT91C_PD5_ETXER EQU (AT91C_PIO_PD5) ;- Ethernet MAC Transmikt Coding Error -AT91C_PIO_PD6 EQU (1:SHL:6) ;- Pin Controlled by PD6 -AT91C_PD6_DTXD EQU (AT91C_PIO_PD6) ;- DBGU Debug Transmit Data -AT91C_PIO_PD7 EQU (1:SHL:7) ;- Pin Controlled by PD7 -AT91C_PD7_PCK0 EQU (AT91C_PIO_PD7) ;- PMC Programmable Clock Output 0 -AT91C_PD7_TSYNC EQU (AT91C_PIO_PD7) ;- ETM Synchronization signal -AT91C_PIO_PD8 EQU (1:SHL:8) ;- Pin Controlled by PD8 -AT91C_PD8_PCK1 EQU (AT91C_PIO_PD8) ;- PMC Programmable Clock Output 1 -AT91C_PD8_TCLK EQU (AT91C_PIO_PD8) ;- ETM Trace Clock signal -AT91C_PIO_PD9 EQU (1:SHL:9) ;- Pin Controlled by PD9 -AT91C_PD9_PCK2 EQU (AT91C_PIO_PD9) ;- PMC Programmable Clock 2 -AT91C_PD9_TPS0 EQU (AT91C_PIO_PD9) ;- ETM ARM9 pipeline status 0 - -;- ***************************************************************************** -;- PERIPHERAL ID DEFINITIONS FOR AT91RM9200 -;- ***************************************************************************** -AT91C_ID_FIQ EQU ( 0) ;- Advanced Interrupt Controller (FIQ) -AT91C_ID_SYS EQU ( 1) ;- System Peripheral -AT91C_ID_PIOA EQU ( 2) ;- Parallel IO Controller A -AT91C_ID_PIOB EQU ( 3) ;- Parallel IO Controller B -AT91C_ID_PIOC EQU ( 4) ;- Parallel IO Controller C -AT91C_ID_PIOD EQU ( 5) ;- Parallel IO Controller D -AT91C_ID_US0 EQU ( 6) ;- USART 0 -AT91C_ID_US1 EQU ( 7) ;- USART 1 -AT91C_ID_US2 EQU ( 8) ;- USART 2 -AT91C_ID_US3 EQU ( 9) ;- USART 3 -AT91C_ID_MCI EQU (10) ;- Multimedia Card Interface -AT91C_ID_UDP EQU (11) ;- USB Device Port -AT91C_ID_TWI EQU (12) ;- Two-Wire Interface -AT91C_ID_SPI EQU (13) ;- Serial Peripheral Interface -AT91C_ID_SSC0 EQU (14) ;- Serial Synchronous Controller 0 -AT91C_ID_SSC1 EQU (15) ;- Serial Synchronous Controller 1 -AT91C_ID_SSC2 EQU (16) ;- Serial Synchronous Controller 2 -AT91C_ID_TC0 EQU (17) ;- Timer Counter 0 -AT91C_ID_TC1 EQU (18) ;- Timer Counter 1 -AT91C_ID_TC2 EQU (19) ;- Timer Counter 2 -AT91C_ID_TC3 EQU (20) ;- Timer Counter 3 -AT91C_ID_TC4 EQU (21) ;- Timer Counter 4 -AT91C_ID_TC5 EQU (22) ;- Timer Counter 5 -AT91C_ID_UHP EQU (23) ;- USB Host port -AT91C_ID_EMAC EQU (24) ;- Ethernet MAC -AT91C_ID_IRQ0 EQU (25) ;- Advanced Interrupt Controller (IRQ0) -AT91C_ID_IRQ1 EQU (26) ;- Advanced Interrupt Controller (IRQ1) -AT91C_ID_IRQ2 EQU (27) ;- Advanced Interrupt Controller (IRQ2) -AT91C_ID_IRQ3 EQU (28) ;- Advanced Interrupt Controller (IRQ3) -AT91C_ID_IRQ4 EQU (29) ;- Advanced Interrupt Controller (IRQ4) -AT91C_ID_IRQ5 EQU (30) ;- Advanced Interrupt Controller (IRQ5) -AT91C_ID_IRQ6 EQU (31) ;- Advanced Interrupt Controller (IRQ6) - -;- ***************************************************************************** -;- BASE ADDRESS DEFINITIONS FOR AT91RM9200 -;- ***************************************************************************** -AT91C_BASE_SYS EQU (0xFFFFF000) ;- (SYS) Base Address -AT91C_BASE_MC EQU (0xFFFFFF00) ;- (MC) Base Address -AT91C_BASE_RTC EQU (0xFFFFFE00) ;- (RTC) Base Address -AT91C_BASE_ST EQU (0xFFFFFD00) ;- (ST) Base Address -AT91C_BASE_PMC EQU (0xFFFFFC00) ;- (PMC) Base Address -AT91C_BASE_CKGR EQU (0xFFFFFC20) ;- (CKGR) Base Address -AT91C_BASE_PIOD EQU (0xFFFFFA00) ;- (PIOD) Base Address -AT91C_BASE_PIOC EQU (0xFFFFF800) ;- (PIOC) Base Address -AT91C_BASE_PIOB EQU (0xFFFFF600) ;- (PIOB) Base Address -AT91C_BASE_PIOA EQU (0xFFFFF400) ;- (PIOA) Base Address -AT91C_BASE_DBGU EQU (0xFFFFF200) ;- (DBGU) Base Address -AT91C_BASE_PDC_DBGU EQU (0xFFFFF300) ;- (PDC_DBGU) Base Address -AT91C_BASE_AIC EQU (0xFFFFF000) ;- (AIC) Base Address -AT91C_BASE_PDC_SPI EQU (0xFFFE0100) ;- (PDC_SPI) Base Address -AT91C_BASE_SPI EQU (0xFFFE0000) ;- (SPI) Base Address -AT91C_BASE_PDC_SSC2 EQU (0xFFFD8100) ;- (PDC_SSC2) Base Address -AT91C_BASE_SSC2 EQU (0xFFFD8000) ;- (SSC2) Base Address -AT91C_BASE_PDC_SSC1 EQU (0xFFFD4100) ;- (PDC_SSC1) Base Address -AT91C_BASE_SSC1 EQU (0xFFFD4000) ;- (SSC1) Base Address -AT91C_BASE_PDC_SSC0 EQU (0xFFFD0100) ;- (PDC_SSC0) Base Address -AT91C_BASE_SSC0 EQU (0xFFFD0000) ;- (SSC0) Base Address -AT91C_BASE_PDC_US3 EQU (0xFFFCC100) ;- (PDC_US3) Base Address -AT91C_BASE_US3 EQU (0xFFFCC000) ;- (US3) Base Address -AT91C_BASE_PDC_US2 EQU (0xFFFC8100) ;- (PDC_US2) Base Address -AT91C_BASE_US2 EQU (0xFFFC8000) ;- (US2) Base Address -AT91C_BASE_PDC_US1 EQU (0xFFFC4100) ;- (PDC_US1) Base Address -AT91C_BASE_US1 EQU (0xFFFC4000) ;- (US1) Base Address -AT91C_BASE_PDC_US0 EQU (0xFFFC0100) ;- (PDC_US0) Base Address -AT91C_BASE_US0 EQU (0xFFFC0000) ;- (US0) Base Address -AT91C_BASE_TWI EQU (0xFFFB8000) ;- (TWI) Base Address -AT91C_BASE_PDC_MCI EQU (0xFFFB4100) ;- (PDC_MCI) Base Address -AT91C_BASE_MCI EQU (0xFFFB4000) ;- (MCI) Base Address -AT91C_BASE_UDP EQU (0xFFFB0000) ;- (UDP) Base Address -AT91C_BASE_TC5 EQU (0xFFFA4080) ;- (TC5) Base Address -AT91C_BASE_TC4 EQU (0xFFFA4040) ;- (TC4) Base Address -AT91C_BASE_TC3 EQU (0xFFFA4000) ;- (TC3) Base Address -AT91C_BASE_TCB1 EQU (0xFFFA4080) ;- (TCB1) Base Address -AT91C_BASE_TC2 EQU (0xFFFA0080) ;- (TC2) Base Address -AT91C_BASE_TC1 EQU (0xFFFA0040) ;- (TC1) Base Address -AT91C_BASE_TC0 EQU (0xFFFA0000) ;- (TC0) Base Address -AT91C_BASE_TCB0 EQU (0xFFFA0000) ;- (TCB0) Base Address -AT91C_BASE_UHP EQU (0x00300000) ;- (UHP) Base Address -AT91C_BASE_EMAC EQU (0xFFFBC000) ;- (EMAC) Base Address -AT91C_BASE_EBI EQU (0xFFFFFF60) ;- (EBI) Base Address -AT91C_BASE_SMC2 EQU (0xFFFFFF70) ;- (SMC2) Base Address -AT91C_BASE_SDRC EQU (0xFFFFFF90) ;- (SDRC) Base Address -AT91C_BASE_BFC EQU (0xFFFFFFC0) ;- (BFC) Base Address - -;- ***************************************************************************** -;- MEMORY MAPPING DEFINITIONS FOR AT91RM9200 -;- ***************************************************************************** -AT91C_ISRAM EQU (0x00200000) ;- Internal SRAM base address -AT91C_ISRAM_SIZE EQU (0x00004000) ;- Internal SRAM size in byte (16 Kbyte) -AT91C_IROM EQU (0x00100000) ;- Internal ROM base address -AT91C_IROM_SIZE EQU (0x00020000) ;- Internal ROM size in byte (128 Kbyte) - - - END diff --git a/target/linux/at91/image/dfboot/src/include/AT91RM9200_inc.h b/target/linux/at91/image/dfboot/src/include/AT91RM9200_inc.h deleted file mode 100644 index dabab01..0000000 --- a/target/linux/at91/image/dfboot/src/include/AT91RM9200_inc.h +++ /dev/null @@ -1,2401 +0,0 @@ -// ---------------------------------------------------------------------------- -// ATMEL Microcontroller Software Support - ROUSSET - -// ---------------------------------------------------------------------------- -// The software is delivered "AS IS" without warranty or condition of any -// kind, either express, implied or statutory. This includes without -// limitation any warranty or condition with respect to merchantability or -// fitness for any particular purpose, or against the infringements of -// intellectual property rights of others. -// ---------------------------------------------------------------------------- -// File Name : AT91RM9200.h -// Object : AT91RM9200 definitions -// Generated : AT91 SW Application Group 11/19/2003 (17:20:51) -// -// CVS Reference : /AT91RM9200.pl/1.16/Fri Feb 07 10:29:51 2003// -// CVS Reference : /SYS_AT91RM9200.pl/1.2/Fri Jan 17 12:44:37 2003// -// CVS Reference : /MC_1760A.pl/1.1/Fri Aug 23 14:38:22 2002// -// CVS Reference : /AIC_1796B.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// -// CVS Reference : /PMC_2636A.pl/1.1.1.1/Fri Jun 28 09:36:48 2002// -// CVS Reference : /ST_1763B.pl/1.1/Fri Aug 23 14:41:42 2002// -// CVS Reference : /RTC_1245D.pl/1.2/Fri Jan 31 12:19:06 2003// -// CVS Reference : /PIO_1725D.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// -// CVS Reference : /DBGU_1754A.pl/1.4/Fri Jan 31 12:18:24 2003// -// CVS Reference : /UDP_1765B.pl/1.3/Fri Aug 02 14:45:38 2002// -// CVS Reference : /MCI_1764A.pl/1.2/Thu Nov 14 17:48:24 2002// -// CVS Reference : /US_1739C.pl/1.2/Fri Jul 12 07:49:25 2002// -// CVS Reference : /SPI_AT91RMxxxx.pl/1.3/Tue Nov 26 10:20:29 2002// -// CVS Reference : /SSC_1762A.pl/1.2/Fri Nov 08 13:26:39 2002// -// CVS Reference : /TC_1753B.pl/1.2/Fri Jan 31 12:19:55 2003// -// CVS Reference : /TWI_1761B.pl/1.4/Fri Feb 07 10:30:07 2003// -// CVS Reference : /PDC_1734B.pl/1.2/Thu Nov 21 16:38:23 2002// -// CVS Reference : /UHP_xxxxA.pl/1.1/Mon Jul 22 12:21:58 2002// -// CVS Reference : /EMAC_1794A.pl/1.4/Fri Jan 17 12:11:54 2003// -// CVS Reference : /EBI_1759B.pl/1.10/Fri Jan 17 12:44:29 2003// -// CVS Reference : /SMC_1783A.pl/1.3/Thu Oct 31 14:38:17 2002// -// CVS Reference : /SDRC_1758B.pl/1.2/Thu Oct 03 13:04:41 2002// -// CVS Reference : /BFC_1757B.pl/1.3/Thu Oct 31 14:38:00 2002// -// ---------------------------------------------------------------------------- - -// Hardware register definition - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR System Peripherals -// ***************************************************************************** - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Memory Controller Interface -// ***************************************************************************** -// *** Register offset in AT91S_MC structure *** -#define MC_RCR ( 0) // MC Remap Control Register -#define MC_ASR ( 4) // MC Abort Status Register -#define MC_AASR ( 8) // MC Abort Address Status Register -#define MC_PUIA (16) // MC Protection Unit Area -#define MC_PUP (80) // MC Protection Unit Peripherals -#define MC_PUER (84) // MC Protection Unit Enable Register -// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- -#define AT91C_MC_RCB (0x1 << 0) // (MC) Remap Command Bit -// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- -#define AT91C_MC_UNDADD (0x1 << 0) // (MC) Undefined Addess Abort Status -#define AT91C_MC_MISADD (0x1 << 1) // (MC) Misaligned Addess Abort Status -#define AT91C_MC_MPU (0x1 << 2) // (MC) Memory protection Unit Abort Status -#define AT91C_MC_ABTSZ (0x3 << 8) // (MC) Abort Size Status -#define AT91C_MC_ABTSZ_BYTE (0x0 << 8) // (MC) Byte -#define AT91C_MC_ABTSZ_HWORD (0x1 << 8) // (MC) Half-word -#define AT91C_MC_ABTSZ_WORD (0x2 << 8) // (MC) Word -#define AT91C_MC_ABTTYP (0x3 << 10) // (MC) Abort Type Status -#define AT91C_MC_ABTTYP_DATAR (0x0 << 10) // (MC) Data Read -#define AT91C_MC_ABTTYP_DATAW (0x1 << 10) // (MC) Data Write -#define AT91C_MC_ABTTYP_FETCH (0x2 << 10) // (MC) Code Fetch -#define AT91C_MC_MST0 (0x1 << 16) // (MC) Master 0 Abort Source -#define AT91C_MC_MST1 (0x1 << 17) // (MC) Master 1 Abort Source -#define AT91C_MC_SVMST0 (0x1 << 24) // (MC) Saved Master 0 Abort Source -#define AT91C_MC_SVMST1 (0x1 << 25) // (MC) Saved Master 1 Abort Source -// -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area -------- -#define AT91C_MC_PROT (0x3 << 0) // (MC) Protection -#define AT91C_MC_PROT_PNAUNA (0x0) // (MC) Privilege: No Access, User: No Access -#define AT91C_MC_PROT_PRWUNA (0x1) // (MC) Privilege: Read/Write, User: No Access -#define AT91C_MC_PROT_PRWURO (0x2) // (MC) Privilege: Read/Write, User: Read Only -#define AT91C_MC_PROT_PRWURW (0x3) // (MC) Privilege: Read/Write, User: Read/Write -#define AT91C_MC_SIZE (0xF << 4) // (MC) Internal Area Size -#define AT91C_MC_SIZE_1KB (0x0 << 4) // (MC) Area size 1KByte -#define AT91C_MC_SIZE_2KB (0x1 << 4) // (MC) Area size 2KByte -#define AT91C_MC_SIZE_4KB (0x2 << 4) // (MC) Area size 4KByte -#define AT91C_MC_SIZE_8KB (0x3 << 4) // (MC) Area size 8KByte -#define AT91C_MC_SIZE_16KB (0x4 << 4) // (MC) Area size 16KByte -#define AT91C_MC_SIZE_32KB (0x5 << 4) // (MC) Area size 32KByte -#define AT91C_MC_SIZE_64KB (0x6 << 4) // (MC) Area size 64KByte -#define AT91C_MC_SIZE_128KB (0x7 << 4) // (MC) Area size 128KByte -#define AT91C_MC_SIZE_256KB (0x8 << 4) // (MC) Area size 256KByte -#define AT91C_MC_SIZE_512KB (0x9 << 4) // (MC) Area size 512KByte -#define AT91C_MC_SIZE_1MB (0xA << 4) // (MC) Area size 1MByte -#define AT91C_MC_SIZE_2MB (0xB << 4) // (MC) Area size 2MByte -#define AT91C_MC_SIZE_4MB (0xC << 4) // (MC) Area size 4MByte -#define AT91C_MC_SIZE_8MB (0xD << 4) // (MC) Area size 8MByte -#define AT91C_MC_SIZE_16MB (0xE << 4) // (MC) Area size 16MByte -#define AT91C_MC_SIZE_64MB (0xF << 4) // (MC) Area size 64MByte -#define AT91C_MC_BA (0x3FFFF << 10) // (MC) Internal Area Base Address -// -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral -------- -// -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area -------- -#define AT91C_MC_PUEB (0x1 << 0) // (MC) Protection Unit enable Bit - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Real-time Clock Alarm and Parallel Load Interface -// ***************************************************************************** -// *** Register offset in AT91S_RTC structure *** -#define RTC_CR ( 0) // Control Register -#define RTC_MR ( 4) // Mode Register -#define RTC_TIMR ( 8) // Time Register -#define RTC_CALR (12) // Calendar Register -#define RTC_TIMALR (16) // Time Alarm Register -#define RTC_CALALR (20) // Calendar Alarm Register -#define RTC_SR (24) // Status Register -#define RTC_SCCR (28) // Status Clear Command Register -#define RTC_IER (32) // Interrupt Enable Register -#define RTC_IDR (36) // Interrupt Disable Register -#define RTC_IMR (40) // Interrupt Mask Register -#define RTC_VER (44) // Valid Entry Register -// -------- RTC_CR : (RTC Offset: 0x0) RTC Control Register -------- -#define AT91C_RTC_UPDTIM (0x1 << 0) // (RTC) Update Request Time Register -#define AT91C_RTC_UPDCAL (0x1 << 1) // (RTC) Update Request Calendar Register -#define AT91C_RTC_TIMEVSEL (0x3 << 8) // (RTC) Time Event Selection -#define AT91C_RTC_TIMEVSEL_MINUTE (0x0 << 8) // (RTC) Minute change. -#define AT91C_RTC_TIMEVSEL_HOUR (0x1 << 8) // (RTC) Hour change. -#define AT91C_RTC_TIMEVSEL_DAY24 (0x2 << 8) // (RTC) Every day at midnight. -#define AT91C_RTC_TIMEVSEL_DAY12 (0x3 << 8) // (RTC) Every day at noon. -#define AT91C_RTC_CALEVSEL (0x3 << 16) // (RTC) Calendar Event Selection -#define AT91C_RTC_CALEVSEL_WEEK (0x0 << 16) // (RTC) Week change (every Monday at time 00:00:00). -#define AT91C_RTC_CALEVSEL_MONTH (0x1 << 16) // (RTC) Month change (every 01 of each month at time 00:00:00). -#define AT91C_RTC_CALEVSEL_YEAR (0x2 << 16) // (RTC) Year change (every January 1 at time 00:00:00). -// -------- RTC_MR : (RTC Offset: 0x4) RTC Mode Register -------- -#define AT91C_RTC_HRMOD (0x1 << 0) // (RTC) 12-24 hour Mode -// -------- RTC_TIMR : (RTC Offset: 0x8) RTC Time Register -------- -#define AT91C_RTC_SEC (0x7F << 0) // (RTC) Current Second -#define AT91C_RTC_MIN (0x7F << 8) // (RTC) Current Minute -#define AT91C_RTC_HOUR (0x1F << 16) // (RTC) Current Hour -#define AT91C_RTC_AMPM (0x1 << 22) // (RTC) Ante Meridiem, Post Meridiem Indicator -// -------- RTC_CALR : (RTC Offset: 0xc) RTC Calendar Register -------- -#define AT91C_RTC_CENT (0x3F << 0) // (RTC) Current Century -#define AT91C_RTC_YEAR (0xFF << 8) // (RTC) Current Year -#define AT91C_RTC_MONTH (0x1F << 16) // (RTC) Current Month -#define AT91C_RTC_DAY (0x7 << 21) // (RTC) Current Day -#define AT91C_RTC_DATE (0x3F << 24) // (RTC) Current Date -// -------- RTC_TIMALR : (RTC Offset: 0x10) RTC Time Alarm Register -------- -#define AT91C_RTC_SECEN (0x1 << 7) // (RTC) Second Alarm Enable -#define AT91C_RTC_MINEN (0x1 << 15) // (RTC) Minute Alarm -#define AT91C_RTC_HOUREN (0x1 << 23) // (RTC) Current Hour -// -------- RTC_CALALR : (RTC Offset: 0x14) RTC Calendar Alarm Register -------- -#define AT91C_RTC_MONTHEN (0x1 << 23) // (RTC) Month Alarm Enable -#define AT91C_RTC_DATEEN (0x1 << 31) // (RTC) Date Alarm Enable -// -------- RTC_SR : (RTC Offset: 0x18) RTC Status Register -------- -#define AT91C_RTC_ACKUPD (0x1 << 0) // (RTC) Acknowledge for Update -#define AT91C_RTC_ALARM (0x1 << 1) // (RTC) Alarm Flag -#define AT91C_RTC_SECEV (0x1 << 2) // (RTC) Second Event -#define AT91C_RTC_TIMEV (0x1 << 3) // (RTC) Time Event -#define AT91C_RTC_CALEV (0x1 << 4) // (RTC) Calendar event -// -------- RTC_SCCR : (RTC Offset: 0x1c) RTC Status Clear Command Register -------- -// -------- RTC_IER : (RTC Offset: 0x20) RTC Interrupt Enable Register -------- -// -------- RTC_IDR : (RTC Offset: 0x24) RTC Interrupt Disable Register -------- -// -------- RTC_IMR : (RTC Offset: 0x28) RTC Interrupt Mask Register -------- -// -------- RTC_VER : (RTC Offset: 0x2c) RTC Valid Entry Register -------- -#define AT91C_RTC_NVTIM (0x1 << 0) // (RTC) Non valid Time -#define AT91C_RTC_NVCAL (0x1 << 1) // (RTC) Non valid Calendar -#define AT91C_RTC_NVTIMALR (0x1 << 2) // (RTC) Non valid time Alarm -#define AT91C_RTC_NVCALALR (0x1 << 3) // (RTC) Nonvalid Calendar Alarm - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR System Timer Interface -// ***************************************************************************** -// *** Register offset in AT91S_ST structure *** -#define ST_CR ( 0) // Control Register -#define ST_PIMR ( 4) // Period Interval Mode Register -#define ST_WDMR ( 8) // Watchdog Mode Register -#define ST_RTMR (12) // Real-time Mode Register -#define ST_SR (16) // Status Register -#define ST_IER (20) // Interrupt Enable Register -#define ST_IDR (24) // Interrupt Disable Register -#define ST_IMR (28) // Interrupt Mask Register -#define ST_RTAR (32) // Real-time Alarm Register -#define ST_CRTR (36) // Current Real-time Register -// -------- ST_CR : (ST Offset: 0x0) System Timer Control Register -------- -#define AT91C_ST_WDRST (0x1 << 0) // (ST) Watchdog Timer Restart -// -------- ST_PIMR : (ST Offset: 0x4) System Timer Period Interval Mode Register -------- -#define AT91C_ST_PIV (0xFFFF << 0) // (ST) Watchdog Timer Restart -// -------- ST_WDMR : (ST Offset: 0x8) System Timer Watchdog Mode Register -------- -#define AT91C_ST_WDV (0xFFFF << 0) // (ST) Watchdog Timer Restart -#define AT91C_ST_RSTEN (0x1 << 16) // (ST) Reset Enable -#define AT91C_ST_EXTEN (0x1 << 17) // (ST) External Signal Assertion Enable -// -------- ST_RTMR : (ST Offset: 0xc) System Timer Real-time Mode Register -------- -#define AT91C_ST_RTPRES (0xFFFF << 0) // (ST) Real-time Timer Prescaler Value -// -------- ST_SR : (ST Offset: 0x10) System Timer Status Register -------- -#define AT91C_ST_PITS (0x1 << 0) // (ST) Period Interval Timer Interrupt -#define AT91C_ST_WDOVF (0x1 << 1) // (ST) Watchdog Overflow -#define AT91C_ST_RTTINC (0x1 << 2) // (ST) Real-time Timer Increment -#define AT91C_ST_ALMS (0x1 << 3) // (ST) Alarm Status -// -------- ST_IER : (ST Offset: 0x14) System Timer Interrupt Enable Register -------- -// -------- ST_IDR : (ST Offset: 0x18) System Timer Interrupt Disable Register -------- -// -------- ST_IMR : (ST Offset: 0x1c) System Timer Interrupt Mask Register -------- -// -------- ST_RTAR : (ST Offset: 0x20) System Timer Real-time Alarm Register -------- -#define AT91C_ST_ALMV (0xFFFFF << 0) // (ST) Alarm Value Value -// -------- ST_CRTR : (ST Offset: 0x24) System Timer Current Real-time Register -------- -#define AT91C_ST_CRTV (0xFFFFF << 0) // (ST) Current Real-time Value - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Power Management Controler -// ***************************************************************************** -// *** Register offset in AT91S_PMC structure *** -#define PMC_SCER ( 0) // System Clock Enable Register -#define PMC_SCDR ( 4) // System Clock Disable Register -#define PMC_SCSR ( 8) // System Clock Status Register -#define PMC_PCER (16) // Peripheral Clock Enable Register -#define PMC_PCDR (20) // Peripheral Clock Disable Register -#define PMC_PCSR (24) // Peripheral Clock Status Register -#define PMC_MCKR (48) // Master Clock Register -#define PMC_PCKR (64) // Programmable Clock Register -#define PMC_IER (96) // Interrupt Enable Register -#define PMC_IDR (100) // Interrupt Disable Register -#define PMC_SR (104) // Status Register -#define PMC_IMR (108) // Interrupt Mask Register -// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- -#define AT91C_PMC_PCK (0x1 << 0) // (PMC) Processor Clock -#define AT91C_PMC_UDP (0x1 << 1) // (PMC) USB Device Port Clock -#define AT91C_PMC_MCKUDP (0x1 << 2) // (PMC) USB Device Port Master Clock Automatic Disable on Suspend -#define AT91C_PMC_UHP (0x1 << 4) // (PMC) USB Host Port Clock -#define AT91C_PMC_PCK0 (0x1 << 8) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK1 (0x1 << 9) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK2 (0x1 << 10) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK3 (0x1 << 11) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK4 (0x1 << 12) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK5 (0x1 << 13) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK6 (0x1 << 14) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK7 (0x1 << 15) // (PMC) Programmable Clock Output -// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- -// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- -// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- -#define AT91C_PMC_CSS (0x3 << 0) // (PMC) Programmable Clock Selection -#define AT91C_PMC_CSS_SLOW_CLK (0x0) // (PMC) Slow Clock is selected -#define AT91C_PMC_CSS_MAIN_CLK (0x1) // (PMC) Main Clock is selected -#define AT91C_PMC_CSS_PLLA_CLK (0x2) // (PMC) Clock from PLL A is selected -#define AT91C_PMC_CSS_PLLB_CLK (0x3) // (PMC) Clock from PLL B is selected -#define AT91C_PMC_PRES (0x7 << 2) // (PMC) Programmable Clock Prescaler -#define AT91C_PMC_PRES_CLK (0x0 << 2) // (PMC) Selected clock -#define AT91C_PMC_PRES_CLK_2 (0x1 << 2) // (PMC) Selected clock divided by 2 -#define AT91C_PMC_PRES_CLK_4 (0x2 << 2) // (PMC) Selected clock divided by 4 -#define AT91C_PMC_PRES_CLK_8 (0x3 << 2) // (PMC) Selected clock divided by 8 -#define AT91C_PMC_PRES_CLK_16 (0x4 << 2) // (PMC) Selected clock divided by 16 -#define AT91C_PMC_PRES_CLK_32 (0x5 << 2) // (PMC) Selected clock divided by 32 -#define AT91C_PMC_PRES_CLK_64 (0x6 << 2) // (PMC) Selected clock divided by 64 -#define AT91C_PMC_MDIV (0x3 << 8) // (PMC) Master Clock Division -#define AT91C_PMC_MDIV_1 (0x0 << 8) // (PMC) The master clock and the processor clock are the same -#define AT91C_PMC_MDIV_2 (0x1 << 8) // (PMC) The processor clock is twice as fast as the master clock -#define AT91C_PMC_MDIV_3 (0x2 << 8) // (PMC) The processor clock is three times faster than the master clock -#define AT91C_PMC_MDIV_4 (0x3 << 8) // (PMC) The processor clock is four times faster than the master clock -// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- -// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- -#define AT91C_PMC_MOSCS (0x1 << 0) // (PMC) MOSC Status/Enable/Disable/Mask -#define AT91C_PMC_LOCKA (0x1 << 1) // (PMC) PLL A Status/Enable/Disable/Mask -#define AT91C_PMC_LOCKB (0x1 << 2) // (PMC) PLL B Status/Enable/Disable/Mask -#define AT91C_PMC_MCKRDY (0x1 << 3) // (PMC) MCK_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK0RDY (0x1 << 8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK1RDY (0x1 << 9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK2RDY (0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK3RDY (0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK4RDY (0x1 << 12) // (PMC) PCK4_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK5RDY (0x1 << 13) // (PMC) PCK5_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK6RDY (0x1 << 14) // (PMC) PCK6_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK7RDY (0x1 << 15) // (PMC) PCK7_RDY Status/Enable/Disable/Mask -// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- -// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- -// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Clock Generator Controler -// ***************************************************************************** -// *** Register offset in AT91S_CKGR structure *** -#define CKGR_MOR ( 0) // Main Oscillator Register -#define CKGR_MCFR ( 4) // Main Clock Frequency Register -#define CKGR_PLLAR ( 8) // PLL A Register -#define CKGR_PLLBR (12) // PLL B Register -// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- -#define AT91C_CKGR_MOSCEN (0x1 << 0) // (CKGR) Main Oscillator Enable -#define AT91C_CKGR_OSCTEST (0x1 << 1) // (CKGR) Oscillator Test -#define AT91C_CKGR_OSCOUNT (0xFF << 8) // (CKGR) Main Oscillator Start-up Time -// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- -#define AT91C_CKGR_MAINF (0xFFFF << 0) // (CKGR) Main Clock Frequency -#define AT91C_CKGR_MAINRDY (0x1 << 16) // (CKGR) Main Clock Ready -// -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- -#define AT91C_CKGR_DIVA (0xFF << 0) // (CKGR) Divider Selected -#define AT91C_CKGR_DIVA_0 (0x0) // (CKGR) Divider output is 0 -#define AT91C_CKGR_DIVA_BYPASS (0x1) // (CKGR) Divider is bypassed -#define AT91C_CKGR_PLLACOUNT (0x3F << 8) // (CKGR) PLL A Counter -#define AT91C_CKGR_OUTA (0x3 << 14) // (CKGR) PLL A Output Frequency Range -#define AT91C_CKGR_OUTA_0 (0x0 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_OUTA_1 (0x1 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_OUTA_2 (0x2 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_OUTA_3 (0x3 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_MULA (0x7FF << 16) // (CKGR) PLL A Multiplier -#define AT91C_CKGR_SRCA (0x1 << 29) // (CKGR) PLL A Source -// -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- -#define AT91C_CKGR_DIVB (0xFF << 0) // (CKGR) Divider Selected -#define AT91C_CKGR_DIVB_0 (0x0) // (CKGR) Divider output is 0 -#define AT91C_CKGR_DIVB_BYPASS (0x1) // (CKGR) Divider is bypassed -#define AT91C_CKGR_PLLBCOUNT (0x3F << 8) // (CKGR) PLL B Counter -#define AT91C_CKGR_OUTB (0x3 << 14) // (CKGR) PLL B Output Frequency Range -#define AT91C_CKGR_OUTB_0 (0x0 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_OUTB_1 (0x1 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_OUTB_2 (0x2 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_OUTB_3 (0x3 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_MULB (0x7FF << 16) // (CKGR) PLL B Multiplier -#define AT91C_CKGR_USB_96M (0x1 << 28) // (CKGR) Divider for USB Ports -#define AT91C_CKGR_USB_PLL (0x1 << 29) // (CKGR) PLL Use - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Parallel Input Output Controler -// ***************************************************************************** -// *** Register offset in AT91S_PIO structure *** -#define PIO_PER ( 0) // PIO Enable Register -#define PIO_PDR ( 4) // PIO Disable Register -#define PIO_PSR ( 8) // PIO Status Register -#define PIO_OER (16) // Output Enable Register -#define PIO_ODR (20) // Output Disable Registerr -#define PIO_OSR (24) // Output Status Register -#define PIO_IFER (32) // Input Filter Enable Register -#define PIO_IFDR (36) // Input Filter Disable Register -#define PIO_IFSR (40) // Input Filter Status Register -#define PIO_SODR (48) // Set Output Data Register -#define PIO_CODR (52) // Clear Output Data Register -#define PIO_ODSR (56) // Output Data Status Register -#define PIO_PDSR (60) // Pin Data Status Register -#define PIO_IER (64) // Interrupt Enable Register -#define PIO_IDR (68) // Interrupt Disable Register -#define PIO_IMR (72) // Interrupt Mask Register -#define PIO_ISR (76) // Interrupt Status Register -#define PIO_MDER (80) // Multi-driver Enable Register -#define PIO_MDDR (84) // Multi-driver Disable Register -#define PIO_MDSR (88) // Multi-driver Status Register -#define PIO_PPUDR (96) // Pull-up Disable Register -#define PIO_PPUER (100) // Pull-up Enable Register -#define PIO_PPUSR (104) // Pad Pull-up Status Register -#define PIO_ASR (112) // Select A Register -#define PIO_BSR (116) // Select B Register -#define PIO_ABSR (120) // AB Select Status Register -#define PIO_OWER (160) // Output Write Enable Register -#define PIO_OWDR (164) // Output Write Disable Register -#define PIO_OWSR (168) // Output Write Status Register - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Debug Unit -// ***************************************************************************** -// *** Register offset in AT91S_DBGU structure *** -#define DBGU_CR ( 0) // Control Register -#define DBGU_MR ( 4) // Mode Register -#define DBGU_IER ( 8) // Interrupt Enable Register -#define DBGU_IDR (12) // Interrupt Disable Register -#define DBGU_IMR (16) // Interrupt Mask Register -#define DBGU_CSR (20) // Channel Status Register -#define DBGU_RHR (24) // Receiver Holding Register -#define DBGU_THR (28) // Transmitter Holding Register -#define DBGU_BRGR (32) // Baud Rate Generator Register -#define DBGU_C1R (64) // Chip ID1 Register -#define DBGU_C2R (68) // Chip ID2 Register -#define DBGU_FNTR (72) // Force NTRST Register -#define DBGU_RPR (256) // Receive Pointer Register -#define DBGU_RCR (260) // Receive Counter Register -#define DBGU_TPR (264) // Transmit Pointer Register -#define DBGU_TCR (268) // Transmit Counter Register -#define DBGU_RNPR (272) // Receive Next Pointer Register -#define DBGU_RNCR (276) // Receive Next Counter Register -#define DBGU_TNPR (280) // Transmit Next Pointer Register -#define DBGU_TNCR (284) // Transmit Next Counter Register -#define DBGU_PTCR (288) // PDC Transfer Control Register -#define DBGU_PTSR (292) // PDC Transfer Status Register -// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- -#define AT91C_US_RSTRX (0x1 << 2) // (DBGU) Reset Receiver -#define AT91C_US_RSTTX (0x1 << 3) // (DBGU) Reset Transmitter -#define AT91C_US_RXEN (0x1 << 4) // (DBGU) Receiver Enable -#define AT91C_US_RXDIS (0x1 << 5) // (DBGU) Receiver Disable -#define AT91C_US_TXEN (0x1 << 6) // (DBGU) Transmitter Enable -#define AT91C_US_TXDIS (0x1 << 7) // (DBGU) Transmitter Disable -// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- -#define AT91C_US_PAR (0x7 << 9) // (DBGU) Parity type -#define AT91C_US_PAR_EVEN (0x0 << 9) // (DBGU) Even Parity -#define AT91C_US_PAR_ODD (0x1 << 9) // (DBGU) Odd Parity -#define AT91C_US_PAR_SPACE (0x2 << 9) // (DBGU) Parity forced to 0 (Space) -#define AT91C_US_PAR_MARK (0x3 << 9) // (DBGU) Parity forced to 1 (Mark) -#define AT91C_US_PAR_NONE (0x4 << 9) // (DBGU) No Parity -#define AT91C_US_PAR_MULTI_DROP (0x6 << 9) // (DBGU) Multi-drop mode -#define AT91C_US_CHMODE (0x3 << 14) // (DBGU) Channel Mode -#define AT91C_US_CHMODE_NORMAL (0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART. -#define AT91C_US_CHMODE_AUTO (0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin. -#define AT91C_US_CHMODE_LOCAL (0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal. -#define AT91C_US_CHMODE_REMOTE (0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin. -// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- -#define AT91C_US_RXRDY (0x1 << 0) // (DBGU) RXRDY Interrupt -#define AT91C_US_TXRDY (0x1 << 1) // (DBGU) TXRDY Interrupt -#define AT91C_US_ENDRX (0x1 << 3) // (DBGU) End of Receive Transfer Interrupt -#define AT91C_US_ENDTX (0x1 << 4) // (DBGU) End of Transmit Interrupt -#define AT91C_US_OVRE (0x1 << 5) // (DBGU) Overrun Interrupt -#define AT91C_US_FRAME (0x1 << 6) // (DBGU) Framing Error Interrupt -#define AT91C_US_PARE (0x1 << 7) // (DBGU) Parity Error Interrupt -#define AT91C_US_TXEMPTY (0x1 << 9) // (DBGU) TXEMPTY Interrupt -#define AT91C_US_TXBUFE (0x1 << 11) // (DBGU) TXBUFE Interrupt -#define AT91C_US_RXBUFF (0x1 << 12) // (DBGU) RXBUFF Interrupt -#define AT91C_US_COMM_TX (0x1 << 30) // (DBGU) COMM_TX Interrupt -#define AT91C_US_COMM_RX (0x1 << 31) // (DBGU) COMM_RX Interrupt -// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- -// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- -// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- -// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- -#define AT91C_US_FORCE_NTRST (0x1 << 0) // (DBGU) Force NTRST in JTAG - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Peripheral Data Controller -// ***************************************************************************** -// *** Register offset in AT91S_PDC structure *** -#define PDC_RPR ( 0) // Receive Pointer Register -#define PDC_RCR ( 4) // Receive Counter Register -#define PDC_TPR ( 8) // Transmit Pointer Register -#define PDC_TCR (12) // Transmit Counter Register -#define PDC_RNPR (16) // Receive Next Pointer Register -#define PDC_RNCR (20) // Receive Next Counter Register -#define PDC_TNPR (24) // Transmit Next Pointer Register -#define PDC_TNCR (28) // Transmit Next Counter Register -#define PDC_PTCR (32) // PDC Transfer Control Register -#define PDC_PTSR (36) // PDC Transfer Status Register -// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- -#define AT91C_PDC_RXTEN (0x1 << 0) // (PDC) Receiver Transfer Enable -#define AT91C_PDC_RXTDIS (0x1 << 1) // (PDC) Receiver Transfer Disable -#define AT91C_PDC_TXTEN (0x1 << 8) // (PDC) Transmitter Transfer Enable -#define AT91C_PDC_TXTDIS (0x1 << 9) // (PDC) Transmitter Transfer Disable -// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Advanced Interrupt Controller -// ***************************************************************************** -// *** Register offset in AT91S_AIC structure *** -#define AIC_SMR ( 0) // Source Mode Register -#define AIC_SVR (128) // Source Vector Register -#define AIC_IVR (256) // IRQ Vector Register -#define AIC_FVR (260) // FIQ Vector Register -#define AIC_ISR (264) // Interrupt Status Register -#define AIC_IPR (268) // Interrupt Pending Register -#define AIC_IMR (272) // Interrupt Mask Register -#define AIC_CISR (276) // Core Interrupt Status Register -#define AIC_IECR (288) // Interrupt Enable Command Register -#define AIC_IDCR (292) // Interrupt Disable Command Register -#define AIC_ICCR (296) // Interrupt Clear Command Register -#define AIC_ISCR (300) // Interrupt Set Command Register -#define AIC_EOICR (304) // End of Interrupt Command Register -#define AIC_SPU (308) // Spurious Vector Register -#define AIC_DCR (312) // Debug Control Register (Protect) -#define AIC_FFER (320) // Fast Forcing Enable Register -#define AIC_FFDR (324) // Fast Forcing Disable Register -#define AIC_FFSR (328) // Fast Forcing Status Register -// -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- -#define AT91C_AIC_PRIOR (0x7 << 0) // (AIC) Priority Level -#define AT91C_AIC_PRIOR_LOWEST (0x0) // (AIC) Lowest priority level -#define AT91C_AIC_PRIOR_HIGHEST (0x7) // (AIC) Highest priority level -#define AT91C_AIC_SRCTYPE (0x3 << 5) // (AIC) Interrupt Source Type -#define AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE (0x0 << 5) // (AIC) Internal Sources Code Label Level Sensitive -#define AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED (0x1 << 5) // (AIC) Internal Sources Code Label Edge triggered -#define AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL (0x2 << 5) // (AIC) External Sources Code Label High-level Sensitive -#define AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE (0x3 << 5) // (AIC) External Sources Code Label Positive Edge triggered -// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- -#define AT91C_AIC_NFIQ (0x1 << 0) // (AIC) NFIQ Status -#define AT91C_AIC_NIRQ (0x1 << 1) // (AIC) NIRQ Status -// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- -#define AT91C_AIC_DCR_PROT (0x1 << 0) // (AIC) Protection Mode -#define AT91C_AIC_DCR_GMSK (0x1 << 1) // (AIC) General Mask - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Serial Parallel Interface -// ***************************************************************************** -// *** Register offset in AT91S_SPI structure *** -#define SPI_CR ( 0) // Control Register -#define SPI_MR ( 4) // Mode Register -#define SPI_RDR ( 8) // Receive Data Register -#define SPI_TDR (12) // Transmit Data Register -#define SPI_SR (16) // Status Register -#define SPI_IER (20) // Interrupt Enable Register -#define SPI_IDR (24) // Interrupt Disable Register -#define SPI_IMR (28) // Interrupt Mask Register -#define SPI_CSR (48) // Chip Select Register -#define SPI_RPR (256) // Receive Pointer Register -#define SPI_RCR (260) // Receive Counter Register -#define SPI_TPR (264) // Transmit Pointer Register -#define SPI_TCR (268) // Transmit Counter Register -#define SPI_RNPR (272) // Receive Next Pointer Register -#define SPI_RNCR (276) // Receive Next Counter Register -#define SPI_TNPR (280) // Transmit Next Pointer Register -#define SPI_TNCR (284) // Transmit Next Counter Register -#define SPI_PTCR (288) // PDC Transfer Control Register -#define SPI_PTSR (292) // PDC Transfer Status Register -// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- -#define AT91C_SPI_SPIEN (0x1 << 0) // (SPI) SPI Enable -#define AT91C_SPI_SPIDIS (0x1 << 1) // (SPI) SPI Disable -#define AT91C_SPI_SWRST (0x1 << 7) // (SPI) SPI Software reset -// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- -#define AT91C_SPI_MSTR (0x1 << 0) // (SPI) Master/Slave Mode -#define AT91C_SPI_PS (0x1 << 1) // (SPI) Peripheral Select -#define AT91C_SPI_PS_FIXED (0x0 << 1) // (SPI) Fixed Peripheral Select -#define AT91C_SPI_PS_VARIABLE (0x1 << 1) // (SPI) Variable Peripheral Select -#define AT91C_SPI_PCSDEC (0x1 << 2) // (SPI) Chip Select Decode -#define AT91C_SPI_DIV32 (0x1 << 3) // (SPI) Clock Selection -#define AT91C_SPI_MODFDIS (0x1 << 4) // (SPI) Mode Fault Detection -#define AT91C_SPI_LLB (0x1 << 7) // (SPI) Clock Selection -#define AT91C_SPI_PCS (0xF << 16) // (SPI) Peripheral Chip Select -#define AT91C_SPI_DLYBCS (0xFF << 24) // (SPI) Delay Between Chip Selects -// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- -#define AT91C_SPI_RD (0xFFFF << 0) // (SPI) Receive Data -#define AT91C_SPI_RPCS (0xF << 16) // (SPI) Peripheral Chip Select Status -// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- -#define AT91C_SPI_TD (0xFFFF << 0) // (SPI) Transmit Data -#define AT91C_SPI_TPCS (0xF << 16) // (SPI) Peripheral Chip Select Status -// -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- -#define AT91C_SPI_RDRF (0x1 << 0) // (SPI) Receive Data Register Full -#define AT91C_SPI_TDRE (0x1 << 1) // (SPI) Transmit Data Register Empty -#define AT91C_SPI_MODF (0x1 << 2) // (SPI) Mode Fault Error -#define AT91C_SPI_OVRES (0x1 << 3) // (SPI) Overrun Error Status -#define AT91C_SPI_SPENDRX (0x1 << 4) // (SPI) End of Receiver Transfer -#define AT91C_SPI_SPENDTX (0x1 << 5) // (SPI) End of Receiver Transfer -#define AT91C_SPI_RXBUFF (0x1 << 6) // (SPI) RXBUFF Interrupt -#define AT91C_SPI_TXBUFE (0x1 << 7) // (SPI) TXBUFE Interrupt -#define AT91C_SPI_SPIENS (0x1 << 16) // (SPI) Enable Status -// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- -// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- -// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- -// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- -#define AT91C_SPI_CPOL (0x1 << 0) // (SPI) Clock Polarity -#define AT91C_SPI_NCPHA (0x1 << 1) // (SPI) Clock Phase -#define AT91C_SPI_BITS (0xF << 4) // (SPI) Bits Per Transfer -#define AT91C_SPI_BITS_8 (0x0 << 4) // (SPI) 8 Bits Per transfer -#define AT91C_SPI_BITS_9 (0x1 << 4) // (SPI) 9 Bits Per transfer -#define AT91C_SPI_BITS_10 (0x2 << 4) // (SPI) 10 Bits Per transfer -#define AT91C_SPI_BITS_11 (0x3 << 4) // (SPI) 11 Bits Per transfer -#define AT91C_SPI_BITS_12 (0x4 << 4) // (SPI) 12 Bits Per transfer -#define AT91C_SPI_BITS_13 (0x5 << 4) // (SPI) 13 Bits Per transfer -#define AT91C_SPI_BITS_14 (0x6 << 4) // (SPI) 14 Bits Per transfer -#define AT91C_SPI_BITS_15 (0x7 << 4) // (SPI) 15 Bits Per transfer -#define AT91C_SPI_BITS_16 (0x8 << 4) // (SPI) 16 Bits Per transfer -#define AT91C_SPI_SCBR (0xFF << 8) // (SPI) Serial Clock Baud Rate -#define AT91C_SPI_DLYBS (0xFF << 16) // (SPI) Serial Clock Baud Rate -#define AT91C_SPI_DLYBCT (0xFF << 24) // (SPI) Delay Between Consecutive Transfers - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Synchronous Serial Controller Interface -// ***************************************************************************** -// *** Register offset in AT91S_SSC structure *** -#define SSC_CR ( 0) // Control Register -#define SSC_CMR ( 4) // Clock Mode Register -#define SSC_RCMR (16) // Receive Clock ModeRegister -#define SSC_RFMR (20) // Receive Frame Mode Register -#define SSC_TCMR (24) // Transmit Clock Mode Register -#define SSC_TFMR (28) // Transmit Frame Mode Register -#define SSC_RHR (32) // Receive Holding Register -#define SSC_THR (36) // Transmit Holding Register -#define SSC_RSHR (48) // Receive Sync Holding Register -#define SSC_TSHR (52) // Transmit Sync Holding Register -#define SSC_RC0R (56) // Receive Compare 0 Register -#define SSC_RC1R (60) // Receive Compare 1 Register -#define SSC_SR (64) // Status Register -#define SSC_IER (68) // Interrupt Enable Register -#define SSC_IDR (72) // Interrupt Disable Register -#define SSC_IMR (76) // Interrupt Mask Register -#define SSC_RPR (256) // Receive Pointer Register -#define SSC_RCR (260) // Receive Counter Register -#define SSC_TPR (264) // Transmit Pointer Register -#define SSC_TCR (268) // Transmit Counter Register -#define SSC_RNPR (272) // Receive Next Pointer Register -#define SSC_RNCR (276) // Receive Next Counter Register -#define SSC_TNPR (280) // Transmit Next Pointer Register -#define SSC_TNCR (284) // Transmit Next Counter Register -#define SSC_PTCR (288) // PDC Transfer Control Register -#define SSC_PTSR (292) // PDC Transfer Status Register -// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- -#define AT91C_SSC_RXEN (0x1 << 0) // (SSC) Receive Enable -#define AT91C_SSC_RXDIS (0x1 << 1) // (SSC) Receive Disable -#define AT91C_SSC_TXEN (0x1 << 8) // (SSC) Transmit Enable -#define AT91C_SSC_TXDIS (0x1 << 9) // (SSC) Transmit Disable -#define AT91C_SSC_SWRST (0x1 << 15) // (SSC) Software Reset -// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- -#define AT91C_SSC_CKS (0x3 << 0) // (SSC) Receive/Transmit Clock Selection -#define AT91C_SSC_CKS_DIV (0x0) // (SSC) Divided Clock -#define AT91C_SSC_CKS_TK (0x1) // (SSC) TK Clock signal -#define AT91C_SSC_CKS_RK (0x2) // (SSC) RK pin -#define AT91C_SSC_CKO (0x7 << 2) // (SSC) Receive/Transmit Clock Output Mode Selection -#define AT91C_SSC_CKO_NONE (0x0 << 2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only -#define AT91C_SSC_CKO_CONTINOUS (0x1 << 2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output -#define AT91C_SSC_CKO_DATA_TX (0x2 << 2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output -#define AT91C_SSC_CKI (0x1 << 5) // (SSC) Receive/Transmit Clock Inversion -#define AT91C_SSC_CKG (0x3 << 6) // (SSC) Receive/Transmit Clock Gating Selection -#define AT91C_SSC_CKG_NONE (0x0 << 6) // (SSC) Receive/Transmit Clock Gating: None, continuous clock -#define AT91C_SSC_CKG_LOW (0x1 << 6) // (SSC) Receive/Transmit Clock enabled only if RF Low -#define AT91C_SSC_CKG_HIGH (0x2 << 6) // (SSC) Receive/Transmit Clock enabled only if RF High -#define AT91C_SSC_START (0xF << 8) // (SSC) Receive/Transmit Start Selection -#define AT91C_SSC_START_CONTINOUS (0x0 << 8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data. -#define AT91C_SSC_START_TX (0x1 << 8) // (SSC) Transmit/Receive start -#define AT91C_SSC_START_LOW_RF (0x2 << 8) // (SSC) Detection of a low level on RF input -#define AT91C_SSC_START_HIGH_RF (0x3 << 8) // (SSC) Detection of a high level on RF input -#define AT91C_SSC_START_FALL_RF (0x4 << 8) // (SSC) Detection of a falling edge on RF input -#define AT91C_SSC_START_RISE_RF (0x5 << 8) // (SSC) Detection of a rising edge on RF input -#define AT91C_SSC_START_LEVEL_RF (0x6 << 8) // (SSC) Detection of any level change on RF input -#define AT91C_SSC_START_EDGE_RF (0x7 << 8) // (SSC) Detection of any edge on RF input -#define AT91C_SSC_START_0 (0x8 << 8) // (SSC) Compare 0 -#define AT91C_SSC_STOP (0x1 << 12) // (SSC) Receive Stop Selection -#define AT91C_SSC_STTOUT (0x1 << 15) // (SSC) Receive/Transmit Start Output Selection -#define AT91C_SSC_STTDLY (0xFF << 16) // (SSC) Receive/Transmit Start Delay -#define AT91C_SSC_PERIOD (0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection -// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- -#define AT91C_SSC_DATLEN (0x1F << 0) // (SSC) Data Length -#define AT91C_SSC_LOOP (0x1 << 5) // (SSC) Loop Mode -#define AT91C_SSC_MSBF (0x1 << 7) // (SSC) Most Significant Bit First -#define AT91C_SSC_DATNB (0xF << 8) // (SSC) Data Number per Frame -#define AT91C_SSC_FSLEN (0xF << 16) // (SSC) Receive/Transmit Frame Sync length -#define AT91C_SSC_FSOS (0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection -#define AT91C_SSC_FSOS_NONE (0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only -#define AT91C_SSC_FSOS_NEGATIVE (0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse -#define AT91C_SSC_FSOS_POSITIVE (0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse -#define AT91C_SSC_FSOS_LOW (0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer -#define AT91C_SSC_FSOS_HIGH (0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer -#define AT91C_SSC_FSOS_TOGGLE (0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer -#define AT91C_SSC_FSEDGE (0x1 << 24) // (SSC) Frame Sync Edge Detection -// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- -// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- -#define AT91C_SSC_DATDEF (0x1 << 5) // (SSC) Data Default Value -#define AT91C_SSC_FSDEN (0x1 << 23) // (SSC) Frame Sync Data Enable -// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- -#define AT91C_SSC_TXRDY (0x1 << 0) // (SSC) Transmit Ready -#define AT91C_SSC_TXEMPTY (0x1 << 1) // (SSC) Transmit Empty -#define AT91C_SSC_ENDTX (0x1 << 2) // (SSC) End Of Transmission -#define AT91C_SSC_TXBUFE (0x1 << 3) // (SSC) Transmit Buffer Empty -#define AT91C_SSC_RXRDY (0x1 << 4) // (SSC) Receive Ready -#define AT91C_SSC_OVRUN (0x1 << 5) // (SSC) Receive Overrun -#define AT91C_SSC_ENDRX (0x1 << 6) // (SSC) End of Reception -#define AT91C_SSC_RXBUFF (0x1 << 7) // (SSC) Receive Buffer Full -#define AT91C_SSC_CP0 (0x1 << 8) // (SSC) Compare 0 -#define AT91C_SSC_CP1 (0x1 << 9) // (SSC) Compare 1 -#define AT91C_SSC_TXSYN (0x1 << 10) // (SSC) Transmit Sync -#define AT91C_SSC_RXSYN (0x1 << 11) // (SSC) Receive Sync -#define AT91C_SSC_TXENA (0x1 << 16) // (SSC) Transmit Enable -#define AT91C_SSC_RXENA (0x1 << 17) // (SSC) Receive Enable -// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- -// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- -// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Usart -// ***************************************************************************** -// *** Register offset in AT91S_USART structure *** -#define US_CR ( 0) // Control Register -#define US_MR ( 4) // Mode Register -#define US_IER ( 8) // Interrupt Enable Register -#define US_IDR (12) // Interrupt Disable Register -#define US_IMR (16) // Interrupt Mask Register -#define US_CSR (20) // Channel Status Register -#define US_RHR (24) // Receiver Holding Register -#define US_THR (28) // Transmitter Holding Register -#define US_BRGR (32) // Baud Rate Generator Register -#define US_RTOR (36) // Receiver Time-out Register -#define US_TTGR (40) // Transmitter Time-guard Register -#define US_FIDI (64) // FI_DI_Ratio Register -#define US_NER (68) // Nb Errors Register -#define US_XXR (72) // XON_XOFF Register -#define US_IF (76) // IRDA_FILTER Register -#define US_RPR (256) // Receive Pointer Register -#define US_RCR (260) // Receive Counter Register -#define US_TPR (264) // Transmit Pointer Register -#define US_TCR (268) // Transmit Counter Register -#define US_RNPR (272) // Receive Next Pointer Register -#define US_RNCR (276) // Receive Next Counter Register -#define US_TNPR (280) // Transmit Next Pointer Register -#define US_TNCR (284) // Transmit Next Counter Register -#define US_PTCR (288) // PDC Transfer Control Register -#define US_PTSR (292) // PDC Transfer Status Register -// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- -#define AT91C_US_RSTSTA (0x1 << 8) // (USART) Reset Status Bits -#define AT91C_US_STTBRK (0x1 << 9) // (USART) Start Break -#define AT91C_US_STPBRK (0x1 << 10) // (USART) Stop Break -#define AT91C_US_STTTO (0x1 << 11) // (USART) Start Time-out -#define AT91C_US_SENDA (0x1 << 12) // (USART) Send Address -#define AT91C_US_RSTIT (0x1 << 13) // (USART) Reset Iterations -#define AT91C_US_RSTNACK (0x1 << 14) // (USART) Reset Non Acknowledge -#define AT91C_US_RETTO (0x1 << 15) // (USART) Rearm Time-out -#define AT91C_US_DTREN (0x1 << 16) // (USART) Data Terminal ready Enable -#define AT91C_US_DTRDIS (0x1 << 17) // (USART) Data Terminal ready Disable -#define AT91C_US_RTSEN (0x1 << 18) // (USART) Request to Send enable -#define AT91C_US_RTSDIS (0x1 << 19) // (USART) Request to Send Disable -// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- -#define AT91C_US_USMODE (0xF << 0) // (USART) Usart mode -#define AT91C_US_USMODE_NORMAL (0x0) // (USART) Normal -#define AT91C_US_USMODE_RS485 (0x1) // (USART) RS485 -#define AT91C_US_USMODE_HWHSH (0x2) // (USART) Hardware Handshaking -#define AT91C_US_USMODE_MODEM (0x3) // (USART) Modem -#define AT91C_US_USMODE_ISO7816_0 (0x4) // (USART) ISO7816 protocol: T = 0 -#define AT91C_US_USMODE_ISO7816_1 (0x6) // (USART) ISO7816 protocol: T = 1 -#define AT91C_US_USMODE_IRDA (0x8) // (USART) IrDA -#define AT91C_US_USMODE_SWHSH (0xC) // (USART) Software Handshaking -#define AT91C_US_CLKS (0x3 << 4) // (USART) Clock Selection (Baud Rate generator Input Clock -#define AT91C_US_CLKS_CLOCK (0x0 << 4) // (USART) Clock -#define AT91C_US_CLKS_FDIV1 (0x1 << 4) // (USART) fdiv1 -#define AT91C_US_CLKS_SLOW (0x2 << 4) // (USART) slow_clock (ARM) -#define AT91C_US_CLKS_EXT (0x3 << 4) // (USART) External (SCK) -#define AT91C_US_CHRL (0x3 << 6) // (USART) Clock Selection (Baud Rate generator Input Clock -#define AT91C_US_CHRL_5_BITS (0x0 << 6) // (USART) Character Length: 5 bits -#define AT91C_US_CHRL_6_BITS (0x1 << 6) // (USART) Character Length: 6 bits -#define AT91C_US_CHRL_7_BITS (0x2 << 6) // (USART) Character Length: 7 bits -#define AT91C_US_CHRL_8_BITS (0x3 << 6) // (USART) Character Length: 8 bits -#define AT91C_US_SYNC (0x1 << 8) // (USART) Synchronous Mode Select -#define AT91C_US_NBSTOP (0x3 << 12) // (USART) Number of Stop bits -#define AT91C_US_NBSTOP_1_BIT (0x0 << 12) // (USART) 1 stop bit -#define AT91C_US_NBSTOP_15_BIT (0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits -#define AT91C_US_NBSTOP_2_BIT (0x2 << 12) // (USART) 2 stop bits -#define AT91C_US_MSBF (0x1 << 16) // (USART) Bit Order -#define AT91C_US_MODE9 (0x1 << 17) // (USART) 9-bit Character length -#define AT91C_US_CKLO (0x1 << 18) // (USART) Clock Output Select -#define AT91C_US_OVER (0x1 << 19) // (USART) Over Sampling Mode -#define AT91C_US_INACK (0x1 << 20) // (USART) Inhibit Non Acknowledge -#define AT91C_US_DSNACK (0x1 << 21) // (USART) Disable Successive NACK -#define AT91C_US_MAX_ITER (0x1 << 24) // (USART) Number of Repetitions -#define AT91C_US_FILTER (0x1 << 28) // (USART) Receive Line Filter -// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- -#define AT91C_US_RXBRK (0x1 << 2) // (USART) Break Received/End of Break -#define AT91C_US_TIMEOUT (0x1 << 8) // (USART) Receiver Time-out -#define AT91C_US_ITERATION (0x1 << 10) // (USART) Max number of Repetitions Reached -#define AT91C_US_NACK (0x1 << 13) // (USART) Non Acknowledge -#define AT91C_US_RIIC (0x1 << 16) // (USART) Ring INdicator Input Change Flag -#define AT91C_US_DSRIC (0x1 << 17) // (USART) Data Set Ready Input Change Flag -#define AT91C_US_DCDIC (0x1 << 18) // (USART) Data Carrier Flag -#define AT91C_US_CTSIC (0x1 << 19) // (USART) Clear To Send Input Change Flag -// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- -// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- -// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- -#define AT91C_US_RI (0x1 << 20) // (USART) Image of RI Input -#define AT91C_US_DSR (0x1 << 21) // (USART) Image of DSR Input -#define AT91C_US_DCD (0x1 << 22) // (USART) Image of DCD Input -#define AT91C_US_CTS (0x1 << 23) // (USART) Image of CTS Input - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Two-wire Interface -// ***************************************************************************** -// *** Register offset in AT91S_TWI structure *** -#define TWI_CR ( 0) // Control Register -#define TWI_MMR ( 4) // Master Mode Register -#define TWI_SMR ( 8) // Slave Mode Register -#define TWI_IADR (12) // Internal Address Register -#define TWI_CWGR (16) // Clock Waveform Generator Register -#define TWI_SR (32) // Status Register -#define TWI_IER (36) // Interrupt Enable Register -#define TWI_IDR (40) // Interrupt Disable Register -#define TWI_IMR (44) // Interrupt Mask Register -#define TWI_RHR (48) // Receive Holding Register -#define TWI_THR (52) // Transmit Holding Register -// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- -#define AT91C_TWI_START (0x1 << 0) // (TWI) Send a START Condition -#define AT91C_TWI_STOP (0x1 << 1) // (TWI) Send a STOP Condition -#define AT91C_TWI_MSEN (0x1 << 2) // (TWI) TWI Master Transfer Enabled -#define AT91C_TWI_MSDIS (0x1 << 3) // (TWI) TWI Master Transfer Disabled -#define AT91C_TWI_SVEN (0x1 << 4) // (TWI) TWI Slave Transfer Enabled -#define AT91C_TWI_SVDIS (0x1 << 5) // (TWI) TWI Slave Transfer Disabled -#define AT91C_TWI_SWRST (0x1 << 7) // (TWI) Software Reset -// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- -#define AT91C_TWI_IADRSZ (0x3 << 8) // (TWI) Internal Device Address Size -#define AT91C_TWI_IADRSZ_NO (0x0 << 8) // (TWI) No internal device address -#define AT91C_TWI_IADRSZ_1_BYTE (0x1 << 8) // (TWI) One-byte internal device address -#define AT91C_TWI_IADRSZ_2_BYTE (0x2 << 8) // (TWI) Two-byte internal device address -#define AT91C_TWI_IADRSZ_3_BYTE (0x3 << 8) // (TWI) Three-byte internal device address -#define AT91C_TWI_MREAD (0x1 << 12) // (TWI) Master Read Direction -#define AT91C_TWI_DADR (0x7F << 16) // (TWI) Device Address -// -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- -#define AT91C_TWI_SADR (0x7F << 16) // (TWI) Slave Device Address -// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- -#define AT91C_TWI_CLDIV (0xFF << 0) // (TWI) Clock Low Divider -#define AT91C_TWI_CHDIV (0xFF << 8) // (TWI) Clock High Divider -#define AT91C_TWI_CKDIV (0x7 << 16) // (TWI) Clock Divider -// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- -#define AT91C_TWI_TXCOMP (0x1 << 0) // (TWI) Transmission Completed -#define AT91C_TWI_RXRDY (0x1 << 1) // (TWI) Receive holding register ReaDY -#define AT91C_TWI_TXRDY (0x1 << 2) // (TWI) Transmit holding register ReaDY -#define AT91C_TWI_SVREAD (0x1 << 3) // (TWI) Slave Read -#define AT91C_TWI_SVACC (0x1 << 4) // (TWI) Slave Access -#define AT91C_TWI_GCACC (0x1 << 5) // (TWI) General Call Access -#define AT91C_TWI_OVRE (0x1 << 6) // (TWI) Overrun Error -#define AT91C_TWI_UNRE (0x1 << 7) // (TWI) Underrun Error -#define AT91C_TWI_NACK (0x1 << 8) // (TWI) Not Acknowledged -#define AT91C_TWI_ARBLST (0x1 << 9) // (TWI) Arbitration Lost -// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- -// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- -// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Multimedia Card Interface -// ***************************************************************************** -// *** Register offset in AT91S_MCI structure *** -#define MCI_CR ( 0) // MCI Control Register -#define MCI_MR ( 4) // MCI Mode Register -#define MCI_DTOR ( 8) // MCI Data Timeout Register -#define MCI_SDCR (12) // MCI SD Card Register -#define MCI_ARGR (16) // MCI Argument Register -#define MCI_CMDR (20) // MCI Command Register -#define MCI_RSPR (32) // MCI Response Register -#define MCI_RDR (48) // MCI Receive Data Register -#define MCI_TDR (52) // MCI Transmit Data Register -#define MCI_SR (64) // MCI Status Register -#define MCI_IER (68) // MCI Interrupt Enable Register -#define MCI_IDR (72) // MCI Interrupt Disable Register -#define MCI_IMR (76) // MCI Interrupt Mask Register -#define MCI_RPR (256) // Receive Pointer Register -#define MCI_RCR (260) // Receive Counter Register -#define MCI_TPR (264) // Transmit Pointer Register -#define MCI_TCR (268) // Transmit Counter Register -#define MCI_RNPR (272) // Receive Next Pointer Register -#define MCI_RNCR (276) // Receive Next Counter Register -#define MCI_TNPR (280) // Transmit Next Pointer Register -#define MCI_TNCR (284) // Transmit Next Counter Register -#define MCI_PTCR (288) // PDC Transfer Control Register -#define MCI_PTSR (292) // PDC Transfer Status Register -// -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- -#define AT91C_MCI_MCIEN (0x1 << 0) // (MCI) Multimedia Interface Enable -#define AT91C_MCI_MCIDIS (0x1 << 1) // (MCI) Multimedia Interface Disable -#define AT91C_MCI_PWSEN (0x1 << 2) // (MCI) Power Save Mode Enable -#define AT91C_MCI_PWSDIS (0x1 << 3) // (MCI) Power Save Mode Disable -// -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- -#define AT91C_MCI_CLKDIV (0x1 << 0) // (MCI) Clock Divider -#define AT91C_MCI_PWSDIV (0x1 << 8) // (MCI) Power Saving Divider -#define AT91C_MCI_PDCPADV (0x1 << 14) // (MCI) PDC Padding Value -#define AT91C_MCI_PDCMODE (0x1 << 15) // (MCI) PDC Oriented Mode -#define AT91C_MCI_BLKLEN (0x1 << 18) // (MCI) Data Block Length -// -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- -#define AT91C_MCI_DTOCYC (0x1 << 0) // (MCI) Data Timeout Cycle Number -#define AT91C_MCI_DTOMUL (0x7 << 4) // (MCI) Data Timeout Multiplier -#define AT91C_MCI_DTOMUL_1 (0x0 << 4) // (MCI) DTOCYC x 1 -#define AT91C_MCI_DTOMUL_16 (0x1 << 4) // (MCI) DTOCYC x 16 -#define AT91C_MCI_DTOMUL_128 (0x2 << 4) // (MCI) DTOCYC x 128 -#define AT91C_MCI_DTOMUL_256 (0x3 << 4) // (MCI) DTOCYC x 256 -#define AT91C_MCI_DTOMUL_1024 (0x4 << 4) // (MCI) DTOCYC x 1024 -#define AT91C_MCI_DTOMUL_4096 (0x5 << 4) // (MCI) DTOCYC x 4096 -#define AT91C_MCI_DTOMUL_65536 (0x6 << 4) // (MCI) DTOCYC x 65536 -#define AT91C_MCI_DTOMUL_1048576 (0x7 << 4) // (MCI) DTOCYC x 1048576 -// -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- -#define AT91C_MCI_SCDSEL (0x1 << 0) // (MCI) SD Card Selector -#define AT91C_MCI_SCDBUS (0x1 << 7) // (MCI) SD Card Bus Width -// -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- -#define AT91C_MCI_CMDNB (0x1F << 0) // (MCI) Command Number -#define AT91C_MCI_RSPTYP (0x3 << 6) // (MCI) Response Type -#define AT91C_MCI_RSPTYP_NO (0x0 << 6) // (MCI) No response -#define AT91C_MCI_RSPTYP_48 (0x1 << 6) // (MCI) 48-bit response -#define AT91C_MCI_RSPTYP_136 (0x2 << 6) // (MCI) 136-bit response -#define AT91C_MCI_SPCMD (0x7 << 8) // (MCI) Special CMD -#define AT91C_MCI_SPCMD_NONE (0x0 << 8) // (MCI) Not a special CMD -#define AT91C_MCI_SPCMD_INIT (0x1 << 8) // (MCI) Initialization CMD -#define AT91C_MCI_SPCMD_SYNC (0x2 << 8) // (MCI) Synchronized CMD -#define AT91C_MCI_SPCMD_IT_CMD (0x4 << 8) // (MCI) Interrupt command -#define AT91C_MCI_SPCMD_IT_REP (0x5 << 8) // (MCI) Interrupt response -#define AT91C_MCI_OPDCMD (0x1 << 11) // (MCI) Open Drain Command -#define AT91C_MCI_MAXLAT (0x1 << 12) // (MCI) Maximum Latency for Command to respond -#define AT91C_MCI_TRCMD (0x3 << 16) // (MCI) Transfer CMD -#define AT91C_MCI_TRCMD_NO (0x0 << 16) // (MCI) No transfer -#define AT91C_MCI_TRCMD_START (0x1 << 16) // (MCI) Start transfer -#define AT91C_MCI_TRCMD_STOP (0x2 << 16) // (MCI) Stop transfer -#define AT91C_MCI_TRDIR (0x1 << 18) // (MCI) Transfer Direction -#define AT91C_MCI_TRTYP (0x3 << 19) // (MCI) Transfer Type -#define AT91C_MCI_TRTYP_BLOCK (0x0 << 19) // (MCI) Block Transfer type -#define AT91C_MCI_TRTYP_MULTIPLE (0x1 << 19) // (MCI) Multiple Block transfer type -#define AT91C_MCI_TRTYP_STREAM (0x2 << 19) // (MCI) Stream transfer type -// -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- -#define AT91C_MCI_CMDRDY (0x1 << 0) // (MCI) Command Ready flag -#define AT91C_MCI_RXRDY (0x1 << 1) // (MCI) RX Ready flag -#define AT91C_MCI_TXRDY (0x1 << 2) // (MCI) TX Ready flag -#define AT91C_MCI_BLKE (0x1 << 3) // (MCI) Data Block Transfer Ended flag -#define AT91C_MCI_DTIP (0x1 << 4) // (MCI) Data Transfer in Progress flag -#define AT91C_MCI_NOTBUSY (0x1 << 5) // (MCI) Data Line Not Busy flag -#define AT91C_MCI_ENDRX (0x1 << 6) // (MCI) End of RX Buffer flag -#define AT91C_MCI_ENDTX (0x1 << 7) // (MCI) End of TX Buffer flag -#define AT91C_MCI_RXBUFF (0x1 << 14) // (MCI) RX Buffer Full flag -#define AT91C_MCI_TXBUFE (0x1 << 15) // (MCI) TX Buffer Empty flag -#define AT91C_MCI_RINDE (0x1 << 16) // (MCI) Response Index Error flag -#define AT91C_MCI_RDIRE (0x1 << 17) // (MCI) Response Direction Error flag -#define AT91C_MCI_RCRCE (0x1 << 18) // (MCI) Response CRC Error flag -#define AT91C_MCI_RENDE (0x1 << 19) // (MCI) Response End Bit Error flag -#define AT91C_MCI_RTOE (0x1 << 20) // (MCI) Response Time-out Error flag -#define AT91C_MCI_DCRCE (0x1 << 21) // (MCI) data CRC Error flag -#define AT91C_MCI_DTOE (0x1 << 22) // (MCI) Data timeout Error flag -#define AT91C_MCI_OVRE (0x1 << 30) // (MCI) Overrun flag -#define AT91C_MCI_UNRE (0x1 << 31) // (MCI) Underrun flag -// -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- -// -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- -// -------- MCI_IMR : (MCI Offset: 0x4c) MCI Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR USB Device Interface -// ***************************************************************************** -// *** Register offset in AT91S_UDP structure *** -#define UDP_NUM ( 0) // Frame Number Register -#define UDP_GLBSTATE ( 4) // Global State Register -#define UDP_FADDR ( 8) // Function Address Register -#define UDP_IER (16) // Interrupt Enable Register -#define UDP_IDR (20) // Interrupt Disable Register -#define UDP_IMR (24) // Interrupt Mask Register -#define UDP_ISR (28) // Interrupt Status Register -#define UDP_ICR (32) // Interrupt Clear Register -#define UDP_RSTEP (40) // Reset Endpoint Register -#define UDP_CSR (48) // Endpoint Control and Status Register -#define UDP_FDR (80) // Endpoint FIFO Data Register -// -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- -#define AT91C_UDP_FRM_NUM (0x7FF << 0) // (UDP) Frame Number as Defined in the Packet Field Formats -#define AT91C_UDP_FRM_ERR (0x1 << 16) // (UDP) Frame Error -#define AT91C_UDP_FRM_OK (0x1 << 17) // (UDP) Frame OK -// -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- -#define AT91C_UDP_FADDEN (0x1 << 0) // (UDP) Function Address Enable -#define AT91C_UDP_CONFG (0x1 << 1) // (UDP) Configured -#define AT91C_UDP_RMWUPE (0x1 << 2) // (UDP) Remote Wake Up Enable -#define AT91C_UDP_RSMINPR (0x1 << 3) // (UDP) A Resume Has Been Sent to the Host -// -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- -#define AT91C_UDP_FADD (0xFF << 0) // (UDP) Function Address Value -#define AT91C_UDP_FEN (0x1 << 8) // (UDP) Function Enable -// -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- -#define AT91C_UDP_EPINT0 (0x1 << 0) // (UDP) Endpoint 0 Interrupt -#define AT91C_UDP_EPINT1 (0x1 << 1) // (UDP) Endpoint 0 Interrupt -#define AT91C_UDP_EPINT2 (0x1 << 2) // (UDP) Endpoint 2 Interrupt -#define AT91C_UDP_EPINT3 (0x1 << 3) // (UDP) Endpoint 3 Interrupt -#define AT91C_UDP_EPINT4 (0x1 << 4) // (UDP) Endpoint 4 Interrupt -#define AT91C_UDP_EPINT5 (0x1 << 5) // (UDP) Endpoint 5 Interrupt -#define AT91C_UDP_EPINT6 (0x1 << 6) // (UDP) Endpoint 6 Interrupt -#define AT91C_UDP_EPINT7 (0x1 << 7) // (UDP) Endpoint 7 Interrupt -#define AT91C_UDP_RXSUSP (0x1 << 8) // (UDP) USB Suspend Interrupt -#define AT91C_UDP_RXRSM (0x1 << 9) // (UDP) USB Resume Interrupt -#define AT91C_UDP_EXTRSM (0x1 << 10) // (UDP) USB External Resume Interrupt -#define AT91C_UDP_SOFINT (0x1 << 11) // (UDP) USB Start Of frame Interrupt -#define AT91C_UDP_WAKEUP (0x1 << 13) // (UDP) USB Resume Interrupt -// -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- -// -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- -// -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- -#define AT91C_UDP_ENDBUSRES (0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt -// -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- -// -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- -#define AT91C_UDP_EP0 (0x1 << 0) // (UDP) Reset Endpoint 0 -#define AT91C_UDP_EP1 (0x1 << 1) // (UDP) Reset Endpoint 1 -#define AT91C_UDP_EP2 (0x1 << 2) // (UDP) Reset Endpoint 2 -#define AT91C_UDP_EP3 (0x1 << 3) // (UDP) Reset Endpoint 3 -#define AT91C_UDP_EP4 (0x1 << 4) // (UDP) Reset Endpoint 4 -#define AT91C_UDP_EP5 (0x1 << 5) // (UDP) Reset Endpoint 5 -#define AT91C_UDP_EP6 (0x1 << 6) // (UDP) Reset Endpoint 6 -#define AT91C_UDP_EP7 (0x1 << 7) // (UDP) Reset Endpoint 7 -// -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- -#define AT91C_UDP_TXCOMP (0x1 << 0) // (UDP) Generates an IN packet with data previously written in the DPR -#define AT91C_UDP_RX_DATA_BK0 (0x1 << 1) // (UDP) Receive Data Bank 0 -#define AT91C_UDP_RXSETUP (0x1 << 2) // (UDP) Sends STALL to the Host (Control endpoints) -#define AT91C_UDP_ISOERROR (0x1 << 3) // (UDP) Isochronous error (Isochronous endpoints) -#define AT91C_UDP_TXPKTRDY (0x1 << 4) // (UDP) Transmit Packet Ready -#define AT91C_UDP_FORCESTALL (0x1 << 5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints). -#define AT91C_UDP_RX_DATA_BK1 (0x1 << 6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes). -#define AT91C_UDP_DIR (0x1 << 7) // (UDP) Transfer Direction -#define AT91C_UDP_EPTYPE (0x7 << 8) // (UDP) Endpoint type -#define AT91C_UDP_EPTYPE_CTRL (0x0 << 8) // (UDP) Control -#define AT91C_UDP_EPTYPE_ISO_OUT (0x1 << 8) // (UDP) Isochronous OUT -#define AT91C_UDP_EPTYPE_BULK_OUT (0x2 << 8) // (UDP) Bulk OUT -#define AT91C_UDP_EPTYPE_INT_OUT (0x3 << 8) // (UDP) Interrupt OUT -#define AT91C_UDP_EPTYPE_ISO_IN (0x5 << 8) // (UDP) Isochronous IN -#define AT91C_UDP_EPTYPE_BULK_IN (0x6 << 8) // (UDP) Bulk IN -#define AT91C_UDP_EPTYPE_INT_IN (0x7 << 8) // (UDP) Interrupt IN -#define AT91C_UDP_DTGLE (0x1 << 11) // (UDP) Data Toggle -#define AT91C_UDP_EPEDS (0x1 << 15) // (UDP) Endpoint Enable Disable -#define AT91C_UDP_RXBYTECNT (0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Timer Counter Channel Interface -// ***************************************************************************** -// *** Register offset in AT91S_TC structure *** -#define TC_CCR ( 0) // Channel Control Register -#define TC_CMR ( 4) // Channel Mode Register -#define TC_CV (16) // Counter Value -#define TC_RA (20) // Register A -#define TC_RB (24) // Register B -#define TC_RC (28) // Register C -#define TC_SR (32) // Status Register -#define TC_IER (36) // Interrupt Enable Register -#define TC_IDR (40) // Interrupt Disable Register -#define TC_IMR (44) // Interrupt Mask Register -// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- -#define AT91C_TC_CLKEN (0x1 << 0) // (TC) Counter Clock Enable Command -#define AT91C_TC_CLKDIS (0x1 << 1) // (TC) Counter Clock Disable Command -#define AT91C_TC_SWTRG (0x1 << 2) // (TC) Software Trigger Command -// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- -#define AT91C_TC_CPCSTOP (0x1 << 6) // (TC) Counter Clock Stopped with RC Compare -#define AT91C_TC_CPCDIS (0x1 << 7) // (TC) Counter Clock Disable with RC Compare -#define AT91C_TC_EEVTEDG (0x3 << 8) // (TC) External Event Edge Selection -#define AT91C_TC_EEVTEDG_NONE (0x0 << 8) // (TC) Edge: None -#define AT91C_TC_EEVTEDG_RISING (0x1 << 8) // (TC) Edge: rising edge -#define AT91C_TC_EEVTEDG_FALLING (0x2 << 8) // (TC) Edge: falling edge -#define AT91C_TC_EEVTEDG_BOTH (0x3 << 8) // (TC) Edge: each edge -#define AT91C_TC_EEVT (0x3 << 10) // (TC) External Event Selection -#define AT91C_TC_EEVT_NONE (0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input -#define AT91C_TC_EEVT_RISING (0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output -#define AT91C_TC_EEVT_FALLING (0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output -#define AT91C_TC_EEVT_BOTH (0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output -#define AT91C_TC_ENETRG (0x1 << 12) // (TC) External Event Trigger enable -#define AT91C_TC_WAVESEL (0x3 << 13) // (TC) Waveform Selection -#define AT91C_TC_WAVESEL_UP (0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare -#define AT91C_TC_WAVESEL_UPDOWN (0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare -#define AT91C_TC_WAVESEL_UP_AUTO (0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare -#define AT91C_TC_WAVESEL_UPDOWN_AUTO (0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare -#define AT91C_TC_CPCTRG (0x1 << 14) // (TC) RC Compare Trigger Enable -#define AT91C_TC_WAVE (0x1 << 15) // (TC) -#define AT91C_TC_ACPA (0x3 << 16) // (TC) RA Compare Effect on TIOA -#define AT91C_TC_ACPA_NONE (0x0 << 16) // (TC) Effect: none -#define AT91C_TC_ACPA_SET (0x1 << 16) // (TC) Effect: set -#define AT91C_TC_ACPA_CLEAR (0x2 << 16) // (TC) Effect: clear -#define AT91C_TC_ACPA_TOGGLE (0x3 << 16) // (TC) Effect: toggle -#define AT91C_TC_ACPC (0x3 << 18) // (TC) RC Compare Effect on TIOA -#define AT91C_TC_ACPC_NONE (0x0 << 18) // (TC) Effect: none -#define AT91C_TC_ACPC_SET (0x1 << 18) // (TC) Effect: set -#define AT91C_TC_ACPC_CLEAR (0x2 << 18) // (TC) Effect: clear -#define AT91C_TC_ACPC_TOGGLE (0x3 << 18) // (TC) Effect: toggle -#define AT91C_TC_AEEVT (0x3 << 20) // (TC) External Event Effect on TIOA -#define AT91C_TC_AEEVT_NONE (0x0 << 20) // (TC) Effect: none -#define AT91C_TC_AEEVT_SET (0x1 << 20) // (TC) Effect: set -#define AT91C_TC_AEEVT_CLEAR (0x2 << 20) // (TC) Effect: clear -#define AT91C_TC_AEEVT_TOGGLE (0x3 << 20) // (TC) Effect: toggle -#define AT91C_TC_ASWTRG (0x3 << 22) // (TC) Software Trigger Effect on TIOA -#define AT91C_TC_ASWTRG_NONE (0x0 << 22) // (TC) Effect: none -#define AT91C_TC_ASWTRG_SET (0x1 << 22) // (TC) Effect: set -#define AT91C_TC_ASWTRG_CLEAR (0x2 << 22) // (TC) Effect: clear -#define AT91C_TC_ASWTRG_TOGGLE (0x3 << 22) // (TC) Effect: toggle -#define AT91C_TC_BCPB (0x3 << 24) // (TC) RB Compare Effect on TIOB -#define AT91C_TC_BCPB_NONE (0x0 << 24) // (TC) Effect: none -#define AT91C_TC_BCPB_SET (0x1 << 24) // (TC) Effect: set -#define AT91C_TC_BCPB_CLEAR (0x2 << 24) // (TC) Effect: clear -#define AT91C_TC_BCPB_TOGGLE (0x3 << 24) // (TC) Effect: toggle -#define AT91C_TC_BCPC (0x3 << 26) // (TC) RC Compare Effect on TIOB -#define AT91C_TC_BCPC_NONE (0x0 << 26) // (TC) Effect: none -#define AT91C_TC_BCPC_SET (0x1 << 26) // (TC) Effect: set -#define AT91C_TC_BCPC_CLEAR (0x2 << 26) // (TC) Effect: clear -#define AT91C_TC_BCPC_TOGGLE (0x3 << 26) // (TC) Effect: toggle -#define AT91C_TC_BEEVT (0x3 << 28) // (TC) External Event Effect on TIOB -#define AT91C_TC_BEEVT_NONE (0x0 << 28) // (TC) Effect: none -#define AT91C_TC_BEEVT_SET (0x1 << 28) // (TC) Effect: set -#define AT91C_TC_BEEVT_CLEAR (0x2 << 28) // (TC) Effect: clear -#define AT91C_TC_BEEVT_TOGGLE (0x3 << 28) // (TC) Effect: toggle -#define AT91C_TC_BSWTRG (0x3 << 30) // (TC) Software Trigger Effect on TIOB -#define AT91C_TC_BSWTRG_NONE (0x0 << 30) // (TC) Effect: none -#define AT91C_TC_BSWTRG_SET (0x1 << 30) // (TC) Effect: set -#define AT91C_TC_BSWTRG_CLEAR (0x2 << 30) // (TC) Effect: clear -#define AT91C_TC_BSWTRG_TOGGLE (0x3 << 30) // (TC) Effect: toggle -// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- -#define AT91C_TC_COVFS (0x1 << 0) // (TC) Counter Overflow -#define AT91C_TC_LOVRS (0x1 << 1) // (TC) Load Overrun -#define AT91C_TC_CPAS (0x1 << 2) // (TC) RA Compare -#define AT91C_TC_CPBS (0x1 << 3) // (TC) RB Compare -#define AT91C_TC_CPCS (0x1 << 4) // (TC) RC Compare -#define AT91C_TC_LDRAS (0x1 << 5) // (TC) RA Loading -#define AT91C_TC_LDRBS (0x1 << 6) // (TC) RB Loading -#define AT91C_TC_ETRCS (0x1 << 7) // (TC) External Trigger -#define AT91C_TC_ETRGS (0x1 << 16) // (TC) Clock Enabling -#define AT91C_TC_MTIOA (0x1 << 17) // (TC) TIOA Mirror -#define AT91C_TC_MTIOB (0x1 << 18) // (TC) TIOA Mirror -// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- -// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- -// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Timer Counter Interface -// ***************************************************************************** -// *** Register offset in AT91S_TCB structure *** -#define TCB_TC0 ( 0) // TC Channel 0 -#define TCB_TC1 (64) // TC Channel 1 -#define TCB_TC2 (128) // TC Channel 2 -#define TCB_BCR (192) // TC Block Control Register -#define TCB_BMR (196) // TC Block Mode Register -// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- -#define AT91C_TCB_SYNC (0x1 << 0) // (TCB) Synchro Command -// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- -#define AT91C_TCB_TC0XC0S (0x1 << 0) // (TCB) External Clock Signal 0 Selection -#define AT91C_TCB_TC0XC0S_TCLK0 (0x0) // (TCB) TCLK0 connected to XC0 -#define AT91C_TCB_TC0XC0S_NONE (0x1) // (TCB) None signal connected to XC0 -#define AT91C_TCB_TC0XC0S_TIOA1 (0x2) // (TCB) TIOA1 connected to XC0 -#define AT91C_TCB_TC0XC0S_TIOA2 (0x3) // (TCB) TIOA2 connected to XC0 -#define AT91C_TCB_TC1XC1S (0x1 << 2) // (TCB) External Clock Signal 1 Selection -#define AT91C_TCB_TC1XC1S_TCLK1 (0x0 << 2) // (TCB) TCLK1 connected to XC1 -#define AT91C_TCB_TC1XC1S_NONE (0x1 << 2) // (TCB) None signal connected to XC1 -#define AT91C_TCB_TC1XC1S_TIOA0 (0x2 << 2) // (TCB) TIOA0 connected to XC1 -#define AT91C_TCB_TC1XC1S_TIOA2 (0x3 << 2) // (TCB) TIOA2 connected to XC1 -#define AT91C_TCB_TC2XC2S (0x1 << 4) // (TCB) External Clock Signal 2 Selection -#define AT91C_TCB_TC2XC2S_TCLK2 (0x0 << 4) // (TCB) TCLK2 connected to XC2 -#define AT91C_TCB_TC2XC2S_NONE (0x1 << 4) // (TCB) None signal connected to XC2 -#define AT91C_TCB_TC2XC2S_TIOA0 (0x2 << 4) // (TCB) TIOA0 connected to XC2 -#define AT91C_TCB_TC2XC2S_TIOA2 (0x3 << 4) // (TCB) TIOA2 connected to XC2 - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR USB Host Interface -// ***************************************************************************** -// *** Register offset in AT91S_UHP structure *** -#define UHP_HcRevision ( 0) // Revision -#define UHP_HcControl ( 4) // Operating modes for the Host Controller -#define UHP_HcCommandStatus ( 8) // Command & status Register -#define UHP_HcInterruptStatus (12) // Interrupt Status Register -#define UHP_HcInterruptEnable (16) // Interrupt Enable Register -#define UHP_HcInterruptDisable (20) // Interrupt Disable Register -#define UHP_HcHCCA (24) // Pointer to the Host Controller Communication Area -#define UHP_HcPeriodCurrentED (28) // Current Isochronous or Interrupt Endpoint Descriptor -#define UHP_HcControlHeadED (32) // First Endpoint Descriptor of the Control list -#define UHP_HcControlCurrentED (36) // Endpoint Control and Status Register -#define UHP_HcBulkHeadED (40) // First endpoint register of the Bulk list -#define UHP_HcBulkCurrentED (44) // Current endpoint of the Bulk list -#define UHP_HcBulkDoneHead (48) // Last completed transfer descriptor -#define UHP_HcFmInterval (52) // Bit time between 2 consecutive SOFs -#define UHP_HcFmRemaining (56) // Bit time remaining in the current Frame -#define UHP_HcFmNumber (60) // Frame number -#define UHP_HcPeriodicStart (64) // Periodic Start -#define UHP_HcLSThreshold (68) // LS Threshold -#define UHP_HcRhDescriptorA (72) // Root Hub characteristics A -#define UHP_HcRhDescriptorB (76) // Root Hub characteristics B -#define UHP_HcRhStatus (80) // Root Hub Status register -#define UHP_HcRhPortStatus (84) // Root Hub Port Status Register - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Ethernet MAC -// ***************************************************************************** -// *** Register offset in AT91S_EMAC structure *** -#define EMAC_CTL ( 0) // Network Control Register -#define EMAC_CFG ( 4) // Network Configuration Register -#define EMAC_SR ( 8) // Network Status Register -#define EMAC_TAR (12) // Transmit Address Register -#define EMAC_TCR (16) // Transmit Control Register -#define EMAC_TSR (20) // Transmit Status Register -#define EMAC_RBQP (24) // Receive Buffer Queue Pointer -#define EMAC_RSR (32) // Receive Status Register -#define EMAC_ISR (36) // Interrupt Status Register -#define EMAC_IER (40) // Interrupt Enable Register -#define EMAC_IDR (44) // Interrupt Disable Register -#define EMAC_IMR (48) // Interrupt Mask Register -#define EMAC_MAN (52) // PHY Maintenance Register -#define EMAC_FRA (64) // Frames Transmitted OK Register -#define EMAC_SCOL (68) // Single Collision Frame Register -#define EMAC_MCOL (72) // Multiple Collision Frame Register -#define EMAC_OK (76) // Frames Received OK Register -#define EMAC_SEQE (80) // Frame Check Sequence Error Register -#define EMAC_ALE (84) // Alignment Error Register -#define EMAC_DTE (88) // Deferred Transmission Frame Register -#define EMAC_LCOL (92) // Late Collision Register -#define EMAC_ECOL (96) // Excessive Collision Register -#define EMAC_CSE (100) // Carrier Sense Error Register -#define EMAC_TUE (104) // Transmit Underrun Error Register -#define EMAC_CDE (108) // Code Error Register -#define EMAC_ELR (112) // Excessive Length Error Register -#define EMAC_RJB (116) // Receive Jabber Register -#define EMAC_USF (120) // Undersize Frame Register -#define EMAC_SQEE (124) // SQE Test Error Register -#define EMAC_DRFC (128) // Discarded RX Frame Register -#define EMAC_HSH (144) // Hash Address High[63:32] -#define EMAC_HSL (148) // Hash Address Low[31:0] -#define EMAC_SA1L (152) // Specific Address 1 Low, First 4 bytes -#define EMAC_SA1H (156) // Specific Address 1 High, Last 2 bytes -#define EMAC_SA2L (160) // Specific Address 2 Low, First 4 bytes -#define EMAC_SA2H (164) // Specific Address 2 High, Last 2 bytes -#define EMAC_SA3L (168) // Specific Address 3 Low, First 4 bytes -#define EMAC_SA3H (172) // Specific Address 3 High, Last 2 bytes -#define EMAC_SA4L (176) // Specific Address 4 Low, First 4 bytes -#define EMAC_SA4H (180) // Specific Address 4 High, Last 2 bytesr -// -------- EMAC_CTL : (EMAC Offset: 0x0) -------- -#define AT91C_EMAC_LB (0x1 << 0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level. -#define AT91C_EMAC_LBL (0x1 << 1) // (EMAC) Loopback local. -#define AT91C_EMAC_RE (0x1 << 2) // (EMAC) Receive enable. -#define AT91C_EMAC_TE (0x1 << 3) // (EMAC) Transmit enable. -#define AT91C_EMAC_MPE (0x1 << 4) // (EMAC) Management port enable. -#define AT91C_EMAC_CSR (0x1 << 5) // (EMAC) Clear statistics registers. -#define AT91C_EMAC_ISR (0x1 << 6) // (EMAC) Increment statistics registers. -#define AT91C_EMAC_WES (0x1 << 7) // (EMAC) Write enable for statistics registers. -#define AT91C_EMAC_BP (0x1 << 8) // (EMAC) Back pressure. -// -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- -#define AT91C_EMAC_SPD (0x1 << 0) // (EMAC) Speed. -#define AT91C_EMAC_FD (0x1 << 1) // (EMAC) Full duplex. -#define AT91C_EMAC_BR (0x1 << 2) // (EMAC) Bit rate. -#define AT91C_EMAC_CAF (0x1 << 4) // (EMAC) Copy all frames. -#define AT91C_EMAC_NBC (0x1 << 5) // (EMAC) No broadcast. -#define AT91C_EMAC_MTI (0x1 << 6) // (EMAC) Multicast hash enable -#define AT91C_EMAC_UNI (0x1 << 7) // (EMAC) Unicast hash enable. -#define AT91C_EMAC_BIG (0x1 << 8) // (EMAC) Receive 1522 bytes. -#define AT91C_EMAC_EAE (0x1 << 9) // (EMAC) External address match enable. -#define AT91C_EMAC_CLK (0x3 << 10) // (EMAC) -#define AT91C_EMAC_CLK_HCLK_8 (0x0 << 10) // (EMAC) HCLK divided by 8 -#define AT91C_EMAC_CLK_HCLK_16 (0x1 << 10) // (EMAC) HCLK divided by 16 -#define AT91C_EMAC_CLK_HCLK_32 (0x2 << 10) // (EMAC) HCLK divided by 32 -#define AT91C_EMAC_CLK_HCLK_64 (0x3 << 10) // (EMAC) HCLK divided by 64 -#define AT91C_EMAC_RTY (0x1 << 12) // (EMAC) -#define AT91C_EMAC_RMII (0x1 << 13) // (EMAC) -// -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- -#define AT91C_EMAC_MDIO (0x1 << 1) // (EMAC) -#define AT91C_EMAC_IDLE (0x1 << 2) // (EMAC) -// -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- -#define AT91C_EMAC_LEN (0x7FF << 0) // (EMAC) -#define AT91C_EMAC_NCRC (0x1 << 15) // (EMAC) -// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- -#define AT91C_EMAC_OVR (0x1 << 0) // (EMAC) -#define AT91C_EMAC_COL (0x1 << 1) // (EMAC) -#define AT91C_EMAC_RLE (0x1 << 2) // (EMAC) -#define AT91C_EMAC_TXIDLE (0x1 << 3) // (EMAC) -#define AT91C_EMAC_BNQ (0x1 << 4) // (EMAC) -#define AT91C_EMAC_COMP (0x1 << 5) // (EMAC) -#define AT91C_EMAC_UND (0x1 << 6) // (EMAC) -// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- -#define AT91C_EMAC_BNA (0x1 << 0) // (EMAC) -#define AT91C_EMAC_REC (0x1 << 1) // (EMAC) -// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- -#define AT91C_EMAC_DONE (0x1 << 0) // (EMAC) -#define AT91C_EMAC_RCOM (0x1 << 1) // (EMAC) -#define AT91C_EMAC_RBNA (0x1 << 2) // (EMAC) -#define AT91C_EMAC_TOVR (0x1 << 3) // (EMAC) -#define AT91C_EMAC_TUND (0x1 << 4) // (EMAC) -#define AT91C_EMAC_RTRY (0x1 << 5) // (EMAC) -#define AT91C_EMAC_TBRE (0x1 << 6) // (EMAC) -#define AT91C_EMAC_TCOM (0x1 << 7) // (EMAC) -#define AT91C_EMAC_TIDLE (0x1 << 8) // (EMAC) -#define AT91C_EMAC_LINK (0x1 << 9) // (EMAC) -#define AT91C_EMAC_ROVR (0x1 << 10) // (EMAC) -#define AT91C_EMAC_HRESP (0x1 << 11) // (EMAC) -// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- -// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- -// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- -// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- -#define AT91C_EMAC_DATA (0xFFFF << 0) // (EMAC) -#define AT91C_EMAC_CODE (0x3 << 16) // (EMAC) -#define AT91C_EMAC_REGA (0x1F << 18) // (EMAC) -#define AT91C_EMAC_PHYA (0x1F << 23) // (EMAC) -#define AT91C_EMAC_RW (0x3 << 28) // (EMAC) -#define AT91C_EMAC_HIGH (0x1 << 30) // (EMAC) -#define AT91C_EMAC_LOW (0x1 << 31) // (EMAC) - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR External Bus Interface -// ***************************************************************************** -// *** Register offset in AT91S_EBI structure *** -#define EBI_CSA ( 0) // Chip Select Assignment Register -#define EBI_CFGR ( 4) // Configuration Register -// -------- EBI_CSA : (EBI Offset: 0x0) Chip Select Assignment Register -------- -#define AT91C_EBI_CS0A (0x1 << 0) // (EBI) Chip Select 0 Assignment -#define AT91C_EBI_CS0A_SMC (0x0) // (EBI) Chip Select 0 is assigned to the Static Memory Controller. -#define AT91C_EBI_CS0A_BFC (0x1) // (EBI) Chip Select 0 is assigned to the Burst Flash Controller. -#define AT91C_EBI_CS1A (0x1 << 1) // (EBI) Chip Select 1 Assignment -#define AT91C_EBI_CS1A_SMC (0x0 << 1) // (EBI) Chip Select 1 is assigned to the Static Memory Controller. -#define AT91C_EBI_CS1A_SDRAMC (0x1 << 1) // (EBI) Chip Select 1 is assigned to the SDRAM Controller. -#define AT91C_EBI_CS3A (0x1 << 3) // (EBI) Chip Select 3 Assignment -#define AT91C_EBI_CS3A_SMC (0x0 << 3) // (EBI) Chip Select 3 is only assigned to the Static Memory Controller and NCS3 behaves as defined by the SMC2. -#define AT91C_EBI_CS3A_SMC_SmartMedia (0x1 << 3) // (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated. -#define AT91C_EBI_CS4A (0x1 << 4) // (EBI) Chip Select 4 Assignment -#define AT91C_EBI_CS4A_SMC (0x0 << 4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and NCS4,NCS5 and NCS6 behave as defined by the SMC2. -#define AT91C_EBI_CS4A_SMC_CompactFlash (0x1 << 4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and the CompactFlash Logic is activated. -// -------- EBI_CFGR : (EBI Offset: 0x4) Configuration Register -------- -#define AT91C_EBI_DBPUC (0x1 << 0) // (EBI) Data Bus Pull-Up Configuration -#define AT91C_EBI_EBSEN (0x1 << 1) // (EBI) Bus Sharing Enable - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface -// ***************************************************************************** -// *** Register offset in AT91S_SMC2 structure *** -#define SMC2_CSR ( 0) // SMC2 Chip Select Register -// -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- -#define AT91C_SMC2_NWS (0x7F << 0) // (SMC2) Number of Wait States -#define AT91C_SMC2_WSEN (0x1 << 7) // (SMC2) Wait State Enable -#define AT91C_SMC2_TDF (0xF << 8) // (SMC2) Data Float Time -#define AT91C_SMC2_BAT (0x1 << 12) // (SMC2) Byte Access Type -#define AT91C_SMC2_DBW (0x1 << 13) // (SMC2) Data Bus Width -#define AT91C_SMC2_DBW_16 (0x1 << 13) // (SMC2) 16-bit. -#define AT91C_SMC2_DBW_8 (0x2 << 13) // (SMC2) 8-bit. -#define AT91C_SMC2_DRP (0x1 << 15) // (SMC2) Data Read Protocol -#define AT91C_SMC2_ACSS (0x3 << 16) // (SMC2) Address to Chip Select Setup -#define AT91C_SMC2_ACSS_STANDARD (0x0 << 16) // (SMC2) Standard, asserted at the beginning of the access and deasserted at the end. -#define AT91C_SMC2_ACSS_1_CYCLE (0x1 << 16) // (SMC2) One cycle less at the beginning and the end of the access. -#define AT91C_SMC2_ACSS_2_CYCLES (0x2 << 16) // (SMC2) Two cycles less at the beginning and the end of the access. -#define AT91C_SMC2_ACSS_3_CYCLES (0x3 << 16) // (SMC2) Three cycles less at the beginning and the end of the access. -#define AT91C_SMC2_RWSETUP (0x7 << 24) // (SMC2) Read and Write Signal Setup Time -#define AT91C_SMC2_RWHOLD (0x7 << 29) // (SMC2) Read and Write Signal Hold Time - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR SDRAM Controller Interface -// ***************************************************************************** -// *** Register offset in AT91S_SDRC structure *** -#define SDRC_MR ( 0) // SDRAM Controller Mode Register -#define SDRC_TR ( 4) // SDRAM Controller Refresh Timer Register -#define SDRC_CR ( 8) // SDRAM Controller Configuration Register -#define SDRC_SRR (12) // SDRAM Controller Self Refresh Register -#define SDRC_LPR (16) // SDRAM Controller Low Power Register -#define SDRC_IER (20) // SDRAM Controller Interrupt Enable Register -#define SDRC_IDR (24) // SDRAM Controller Interrupt Disable Register -#define SDRC_IMR (28) // SDRAM Controller Interrupt Mask Register -#define SDRC_ISR (32) // SDRAM Controller Interrupt Mask Register -// -------- SDRC_MR : (SDRC Offset: 0x0) SDRAM Controller Mode Register -------- -#define AT91C_SDRC_MODE (0xF << 0) // (SDRC) Mode -#define AT91C_SDRC_MODE_NORMAL_CMD (0x0) // (SDRC) Normal Mode -#define AT91C_SDRC_MODE_NOP_CMD (0x1) // (SDRC) NOP Command -#define AT91C_SDRC_MODE_PRCGALL_CMD (0x2) // (SDRC) All Banks Precharge Command -#define AT91C_SDRC_MODE_LMR_CMD (0x3) // (SDRC) Load Mode Register Command -#define AT91C_SDRC_MODE_RFSH_CMD (0x4) // (SDRC) Refresh Command -#define AT91C_SDRC_DBW (0x1 << 4) // (SDRC) Data Bus Width -#define AT91C_SDRC_DBW_32_BITS (0x0 << 4) // (SDRC) 32 Bits datas bus -#define AT91C_SDRC_DBW_16_BITS (0x1 << 4) // (SDRC) 16 Bits datas bus -// -------- SDRC_TR : (SDRC Offset: 0x4) SDRC Refresh Timer Register -------- -#define AT91C_SDRC_COUNT (0xFFF << 0) // (SDRC) Refresh Counter -// -------- SDRC_CR : (SDRC Offset: 0x8) SDRAM Configuration Register -------- -#define AT91C_SDRC_NC (0x3 << 0) // (SDRC) Number of Column Bits -#define AT91C_SDRC_NC_8 (0x0) // (SDRC) 8 Bits -#define AT91C_SDRC_NC_9 (0x1) // (SDRC) 9 Bits -#define AT91C_SDRC_NC_10 (0x2) // (SDRC) 10 Bits -#define AT91C_SDRC_NC_11 (0x3) // (SDRC) 11 Bits -#define AT91C_SDRC_NR (0x3 << 2) // (SDRC) Number of Row Bits -#define AT91C_SDRC_NR_11 (0x0 << 2) // (SDRC) 11 Bits -#define AT91C_SDRC_NR_12 (0x1 << 2) // (SDRC) 12 Bits -#define AT91C_SDRC_NR_13 (0x2 << 2) // (SDRC) 13 Bits -#define AT91C_SDRC_NB (0x1 << 4) // (SDRC) Number of Banks -#define AT91C_SDRC_NB_2_BANKS (0x0 << 4) // (SDRC) 2 banks -#define AT91C_SDRC_NB_4_BANKS (0x1 << 4) // (SDRC) 4 banks -#define AT91C_SDRC_CAS (0x3 << 5) // (SDRC) CAS Latency -#define AT91C_SDRC_CAS_2 (0x2 << 5) // (SDRC) 2 cycles -#define AT91C_SDRC_TWR (0xF << 7) // (SDRC) Number of Write Recovery Time Cycles -#define AT91C_SDRC_TRC (0xF << 11) // (SDRC) Number of RAS Cycle Time Cycles -#define AT91C_SDRC_TRP (0xF << 15) // (SDRC) Number of RAS Precharge Time Cycles -#define AT91C_SDRC_TRCD (0xF << 19) // (SDRC) Number of RAS to CAS Delay Cycles -#define AT91C_SDRC_TRAS (0xF << 23) // (SDRC) Number of RAS Active Time Cycles -#define AT91C_SDRC_TXSR (0xF << 27) // (SDRC) Number of Command Recovery Time Cycles -// -------- SDRC_SRR : (SDRC Offset: 0xc) SDRAM Controller Self-refresh Register -------- -#define AT91C_SDRC_SRCB (0x1 << 0) // (SDRC) Self-refresh Command Bit -// -------- SDRC_LPR : (SDRC Offset: 0x10) SDRAM Controller Low-power Register -------- -#define AT91C_SDRC_LPCB (0x1 << 0) // (SDRC) Low-power Command Bit -// -------- SDRC_IER : (SDRC Offset: 0x14) SDRAM Controller Interrupt Enable Register -------- -#define AT91C_SDRC_RES (0x1 << 0) // (SDRC) Refresh Error Status -// -------- SDRC_IDR : (SDRC Offset: 0x18) SDRAM Controller Interrupt Disable Register -------- -// -------- SDRC_IMR : (SDRC Offset: 0x1c) SDRAM Controller Interrupt Mask Register -------- -// -------- SDRC_ISR : (SDRC Offset: 0x20) SDRAM Controller Interrupt Status Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Burst Flash Controller Interface -// ***************************************************************************** -// *** Register offset in AT91S_BFC structure *** -#define BFC_MR ( 0) // BFC Mode Register -// -------- BFC_MR : (BFC Offset: 0x0) BFC Mode Register -------- -#define AT91C_BFC_BFCOM (0x3 << 0) // (BFC) Burst Flash Controller Operating Mode -#define AT91C_BFC_BFCOM_DISABLED (0x0) // (BFC) NPCS0 is driven by the SMC or remains high. -#define AT91C_BFC_BFCOM_ASYNC (0x1) // (BFC) Asynchronous -#define AT91C_BFC_BFCOM_BURST_READ (0x2) // (BFC) Burst Read -#define AT91C_BFC_BFCC (0x3 << 2) // (BFC) Burst Flash Controller Operating Mode -#define AT91C_BFC_BFCC_MCK (0x1 << 2) // (BFC) Master Clock. -#define AT91C_BFC_BFCC_MCK_DIV_2 (0x2 << 2) // (BFC) Master Clock divided by 2. -#define AT91C_BFC_BFCC_MCK_DIV_4 (0x3 << 2) // (BFC) Master Clock divided by 4. -#define AT91C_BFC_AVL (0xF << 4) // (BFC) Address Valid Latency -#define AT91C_BFC_PAGES (0x7 << 8) // (BFC) Page Size -#define AT91C_BFC_PAGES_NO_PAGE (0x0 << 8) // (BFC) No page handling. -#define AT91C_BFC_PAGES_16 (0x1 << 8) // (BFC) 16 bytes page size. -#define AT91C_BFC_PAGES_32 (0x2 << 8) // (BFC) 32 bytes page size. -#define AT91C_BFC_PAGES_64 (0x3 << 8) // (BFC) 64 bytes page size. -#define AT91C_BFC_PAGES_128 (0x4 << 8) // (BFC) 128 bytes page size. -#define AT91C_BFC_PAGES_256 (0x5 << 8) // (BFC) 256 bytes page size. -#define AT91C_BFC_PAGES_512 (0x6 << 8) // (BFC) 512 bytes page size. -#define AT91C_BFC_PAGES_1024 (0x7 << 8) // (BFC) 1024 bytes page size. -#define AT91C_BFC_OEL (0x3 << 12) // (BFC) Output Enable Latency -#define AT91C_BFC_BAAEN (0x1 << 16) // (BFC) Burst Address Advance Enable -#define AT91C_BFC_BFOEH (0x1 << 17) // (BFC) Burst Flash Output Enable Handling -#define AT91C_BFC_MUXEN (0x1 << 18) // (BFC) Multiplexed Bus Enable -#define AT91C_BFC_RDYEN (0x1 << 19) // (BFC) Ready Enable Mode - -// ***************************************************************************** -// REGISTER ADDRESS DEFINITION FOR AT91RM9200 -// ***************************************************************************** -// ========== Register definition for SYS peripheral ========== -// ========== Register definition for MC peripheral ========== -#define AT91C_MC_PUER (0xFFFFFF54) // (MC) MC Protection Unit Enable Register -#define AT91C_MC_ASR (0xFFFFFF04) // (MC) MC Abort Status Register -#define AT91C_MC_PUP (0xFFFFFF50) // (MC) MC Protection Unit Peripherals -#define AT91C_MC_PUIA (0xFFFFFF10) // (MC) MC Protection Unit Area -#define AT91C_MC_AASR (0xFFFFFF08) // (MC) MC Abort Address Status Register -#define AT91C_MC_RCR (0xFFFFFF00) // (MC) MC Remap Control Register -// ========== Register definition for RTC peripheral ========== -#define AT91C_RTC_IMR (0xFFFFFE28) // (RTC) Interrupt Mask Register -#define AT91C_RTC_IER (0xFFFFFE20) // (RTC) Interrupt Enable Register -#define AT91C_RTC_SR (0xFFFFFE18) // (RTC) Status Register -#define AT91C_RTC_TIMALR (0xFFFFFE10) // (RTC) Time Alarm Register -#define AT91C_RTC_TIMR (0xFFFFFE08) // (RTC) Time Register -#define AT91C_RTC_CR (0xFFFFFE00) // (RTC) Control Register -#define AT91C_RTC_VER (0xFFFFFE2C) // (RTC) Valid Entry Register -#define AT91C_RTC_IDR (0xFFFFFE24) // (RTC) Interrupt Disable Register -#define AT91C_RTC_SCCR (0xFFFFFE1C) // (RTC) Status Clear Command Register -#define AT91C_RTC_CALALR (0xFFFFFE14) // (RTC) Calendar Alarm Register -#define AT91C_RTC_CALR (0xFFFFFE0C) // (RTC) Calendar Register -#define AT91C_RTC_MR (0xFFFFFE04) // (RTC) Mode Register -// ========== Register definition for ST peripheral ========== -#define AT91C_ST_CRTR (0xFFFFFD24) // (ST) Current Real-time Register -#define AT91C_ST_IMR (0xFFFFFD1C) // (ST) Interrupt Mask Register -#define AT91C_ST_IER (0xFFFFFD14) // (ST) Interrupt Enable Register -#define AT91C_ST_RTMR (0xFFFFFD0C) // (ST) Real-time Mode Register -#define AT91C_ST_PIMR (0xFFFFFD04) // (ST) Period Interval Mode Register -#define AT91C_ST_RTAR (0xFFFFFD20) // (ST) Real-time Alarm Register -#define AT91C_ST_IDR (0xFFFFFD18) // (ST) Interrupt Disable Register -#define AT91C_ST_SR (0xFFFFFD10) // (ST) Status Register -#define AT91C_ST_WDMR (0xFFFFFD08) // (ST) Watchdog Mode Register -#define AT91C_ST_CR (0xFFFFFD00) // (ST) Control Register -// ========== Register definition for PMC peripheral ========== -#define AT91C_PMC_SCSR (0xFFFFFC08) // (PMC) System Clock Status Register -#define AT91C_PMC_SCER (0xFFFFFC00) // (PMC) System Clock Enable Register -#define AT91C_PMC_IMR (0xFFFFFC6C) // (PMC) Interrupt Mask Register -#define AT91C_PMC_IDR (0xFFFFFC64) // (PMC) Interrupt Disable Register -#define AT91C_PMC_PCDR (0xFFFFFC14) // (PMC) Peripheral Clock Disable Register -#define AT91C_PMC_SCDR (0xFFFFFC04) // (PMC) System Clock Disable Register -#define AT91C_PMC_SR (0xFFFFFC68) // (PMC) Status Register -#define AT91C_PMC_IER (0xFFFFFC60) // (PMC) Interrupt Enable Register -#define AT91C_PMC_MCKR (0xFFFFFC30) // (PMC) Master Clock Register -#define AT91C_PMC_PCER (0xFFFFFC10) // (PMC) Peripheral Clock Enable Register -#define AT91C_PMC_PCSR (0xFFFFFC18) // (PMC) Peripheral Clock Status Register -#define AT91C_PMC_PCKR (0xFFFFFC40) // (PMC) Programmable Clock Register -// ========== Register definition for CKGR peripheral ========== -#define AT91C_CKGR_PLLBR (0xFFFFFC2C) // (CKGR) PLL B Register -#define AT91C_CKGR_MCFR (0xFFFFFC24) // (CKGR) Main Clock Frequency Register -#define AT91C_CKGR_PLLAR (0xFFFFFC28) // (CKGR) PLL A Register -#define AT91C_CKGR_MOR (0xFFFFFC20) // (CKGR) Main Oscillator Register -// ========== Register definition for PIOD peripheral ========== -#define AT91C_PIOD_PDSR (0xFFFFFA3C) // (PIOD) Pin Data Status Register -#define AT91C_PIOD_CODR (0xFFFFFA34) // (PIOD) Clear Output Data Register -#define AT91C_PIOD_OWER (0xFFFFFAA0) // (PIOD) Output Write Enable Register -#define AT91C_PIOD_MDER (0xFFFFFA50) // (PIOD) Multi-driver Enable Register -#define AT91C_PIOD_IMR (0xFFFFFA48) // (PIOD) Interrupt Mask Register -#define AT91C_PIOD_IER (0xFFFFFA40) // (PIOD) Interrupt Enable Register -#define AT91C_PIOD_ODSR (0xFFFFFA38) // (PIOD) Output Data Status Register -#define AT91C_PIOD_SODR (0xFFFFFA30) // (PIOD) Set Output Data Register -#define AT91C_PIOD_PER (0xFFFFFA00) // (PIOD) PIO Enable Register -#define AT91C_PIOD_OWDR (0xFFFFFAA4) // (PIOD) Output Write Disable Register -#define AT91C_PIOD_PPUER (0xFFFFFA64) // (PIOD) Pull-up Enable Register -#define AT91C_PIOD_MDDR (0xFFFFFA54) // (PIOD) Multi-driver Disable Register -#define AT91C_PIOD_ISR (0xFFFFFA4C) // (PIOD) Interrupt Status Register -#define AT91C_PIOD_IDR (0xFFFFFA44) // (PIOD) Interrupt Disable Register -#define AT91C_PIOD_PDR (0xFFFFFA04) // (PIOD) PIO Disable Register -#define AT91C_PIOD_ODR (0xFFFFFA14) // (PIOD) Output Disable Registerr -#define AT91C_PIOD_OWSR (0xFFFFFAA8) // (PIOD) Output Write Status Register -#define AT91C_PIOD_ABSR (0xFFFFFA78) // (PIOD) AB Select Status Register -#define AT91C_PIOD_ASR (0xFFFFFA70) // (PIOD) Select A Register -#define AT91C_PIOD_PPUSR (0xFFFFFA68) // (PIOD) Pad Pull-up Status Register -#define AT91C_PIOD_PPUDR (0xFFFFFA60) // (PIOD) Pull-up Disable Register -#define AT91C_PIOD_MDSR (0xFFFFFA58) // (PIOD) Multi-driver Status Register -#define AT91C_PIOD_PSR (0xFFFFFA08) // (PIOD) PIO Status Register -#define AT91C_PIOD_OER (0xFFFFFA10) // (PIOD) Output Enable Register -#define AT91C_PIOD_OSR (0xFFFFFA18) // (PIOD) Output Status Register -#define AT91C_PIOD_IFER (0xFFFFFA20) // (PIOD) Input Filter Enable Register -#define AT91C_PIOD_BSR (0xFFFFFA74) // (PIOD) Select B Register -#define AT91C_PIOD_IFDR (0xFFFFFA24) // (PIOD) Input Filter Disable Register -#define AT91C_PIOD_IFSR (0xFFFFFA28) // (PIOD) Input Filter Status Register -// ========== Register definition for PIOC peripheral ========== -#define AT91C_PIOC_IFDR (0xFFFFF824) // (PIOC) Input Filter Disable Register -#define AT91C_PIOC_ODR (0xFFFFF814) // (PIOC) Output Disable Registerr -#define AT91C_PIOC_ABSR (0xFFFFF878) // (PIOC) AB Select Status Register -#define AT91C_PIOC_SODR (0xFFFFF830) // (PIOC) Set Output Data Register -#define AT91C_PIOC_IFSR (0xFFFFF828) // (PIOC) Input Filter Status Register -#define AT91C_PIOC_CODR (0xFFFFF834) // (PIOC) Clear Output Data Register -#define AT91C_PIOC_ODSR (0xFFFFF838) // (PIOC) Output Data Status Register -#define AT91C_PIOC_IER (0xFFFFF840) // (PIOC) Interrupt Enable Register -#define AT91C_PIOC_IMR (0xFFFFF848) // (PIOC) Interrupt Mask Register -#define AT91C_PIOC_OWDR (0xFFFFF8A4) // (PIOC) Output Write Disable Register -#define AT91C_PIOC_MDDR (0xFFFFF854) // (PIOC) Multi-driver Disable Register -#define AT91C_PIOC_PDSR (0xFFFFF83C) // (PIOC) Pin Data Status Register -#define AT91C_PIOC_IDR (0xFFFFF844) // (PIOC) Interrupt Disable Register -#define AT91C_PIOC_ISR (0xFFFFF84C) // (PIOC) Interrupt Status Register -#define AT91C_PIOC_PDR (0xFFFFF804) // (PIOC) PIO Disable Register -#define AT91C_PIOC_OWSR (0xFFFFF8A8) // (PIOC) Output Write Status Register -#define AT91C_PIOC_OWER (0xFFFFF8A0) // (PIOC) Output Write Enable Register -#define AT91C_PIOC_ASR (0xFFFFF870) // (PIOC) Select A Register -#define AT91C_PIOC_PPUSR (0xFFFFF868) // (PIOC) Pad Pull-up Status Register -#define AT91C_PIOC_PPUDR (0xFFFFF860) // (PIOC) Pull-up Disable Register -#define AT91C_PIOC_MDSR (0xFFFFF858) // (PIOC) Multi-driver Status Register -#define AT91C_PIOC_MDER (0xFFFFF850) // (PIOC) Multi-driver Enable Register -#define AT91C_PIOC_IFER (0xFFFFF820) // (PIOC) Input Filter Enable Register -#define AT91C_PIOC_OSR (0xFFFFF818) // (PIOC) Output Status Register -#define AT91C_PIOC_OER (0xFFFFF810) // (PIOC) Output Enable Register -#define AT91C_PIOC_PSR (0xFFFFF808) // (PIOC) PIO Status Register -#define AT91C_PIOC_PER (0xFFFFF800) // (PIOC) PIO Enable Register -#define AT91C_PIOC_BSR (0xFFFFF874) // (PIOC) Select B Register -#define AT91C_PIOC_PPUER (0xFFFFF864) // (PIOC) Pull-up Enable Register -// ========== Register definition for PIOB peripheral ========== -#define AT91C_PIOB_OWSR (0xFFFFF6A8) // (PIOB) Output Write Status Register -#define AT91C_PIOB_PPUSR (0xFFFFF668) // (PIOB) Pad Pull-up Status Register -#define AT91C_PIOB_PPUDR (0xFFFFF660) // (PIOB) Pull-up Disable Register -#define AT91C_PIOB_MDSR (0xFFFFF658) // (PIOB) Multi-driver Status Register -#define AT91C_PIOB_MDER (0xFFFFF650) // (PIOB) Multi-driver Enable Register -#define AT91C_PIOB_IMR (0xFFFFF648) // (PIOB) Interrupt Mask Register -#define AT91C_PIOB_OSR (0xFFFFF618) // (PIOB) Output Status Register -#define AT91C_PIOB_OER (0xFFFFF610) // (PIOB) Output Enable Register -#define AT91C_PIOB_PSR (0xFFFFF608) // (PIOB) PIO Status Register -#define AT91C_PIOB_PER (0xFFFFF600) // (PIOB) PIO Enable Register -#define AT91C_PIOB_BSR (0xFFFFF674) // (PIOB) Select B Register -#define AT91C_PIOB_PPUER (0xFFFFF664) // (PIOB) Pull-up Enable Register -#define AT91C_PIOB_IFDR (0xFFFFF624) // (PIOB) Input Filter Disable Register -#define AT91C_PIOB_ODR (0xFFFFF614) // (PIOB) Output Disable Registerr -#define AT91C_PIOB_ABSR (0xFFFFF678) // (PIOB) AB Select Status Register -#define AT91C_PIOB_ASR (0xFFFFF670) // (PIOB) Select A Register -#define AT91C_PIOB_IFER (0xFFFFF620) // (PIOB) Input Filter Enable Register -#define AT91C_PIOB_IFSR (0xFFFFF628) // (PIOB) Input Filter Status Register -#define AT91C_PIOB_SODR (0xFFFFF630) // (PIOB) Set Output Data Register -#define AT91C_PIOB_ODSR (0xFFFFF638) // (PIOB) Output Data Status Register -#define AT91C_PIOB_CODR (0xFFFFF634) // (PIOB) Clear Output Data Register -#define AT91C_PIOB_PDSR (0xFFFFF63C) // (PIOB) Pin Data Status Register -#define AT91C_PIOB_OWER (0xFFFFF6A0) // (PIOB) Output Write Enable Register -#define AT91C_PIOB_IER (0xFFFFF640) // (PIOB) Interrupt Enable Register -#define AT91C_PIOB_OWDR (0xFFFFF6A4) // (PIOB) Output Write Disable Register -#define AT91C_PIOB_MDDR (0xFFFFF654) // (PIOB) Multi-driver Disable Register -#define AT91C_PIOB_ISR (0xFFFFF64C) // (PIOB) Interrupt Status Register -#define AT91C_PIOB_IDR (0xFFFFF644) // (PIOB) Interrupt Disable Register -#define AT91C_PIOB_PDR (0xFFFFF604) // (PIOB) PIO Disable Register -// ========== Register definition for PIOA peripheral ========== -#define AT91C_PIOA_IMR (0xFFFFF448) // (PIOA) Interrupt Mask Register -#define AT91C_PIOA_IER (0xFFFFF440) // (PIOA) Interrupt Enable Register -#define AT91C_PIOA_OWDR (0xFFFFF4A4) // (PIOA) Output Write Disable Register -#define AT91C_PIOA_ISR (0xFFFFF44C) // (PIOA) Interrupt Status Register -#define AT91C_PIOA_PPUDR (0xFFFFF460) // (PIOA) Pull-up Disable Register -#define AT91C_PIOA_MDSR (0xFFFFF458) // (PIOA) Multi-driver Status Register -#define AT91C_PIOA_MDER (0xFFFFF450) // (PIOA) Multi-driver Enable Register -#define AT91C_PIOA_PER (0xFFFFF400) // (PIOA) PIO Enable Register -#define AT91C_PIOA_PSR (0xFFFFF408) // (PIOA) PIO Status Register -#define AT91C_PIOA_OER (0xFFFFF410) // (PIOA) Output Enable Register -#define AT91C_PIOA_BSR (0xFFFFF474) // (PIOA) Select B Register -#define AT91C_PIOA_PPUER (0xFFFFF464) // (PIOA) Pull-up Enable Register -#define AT91C_PIOA_MDDR (0xFFFFF454) // (PIOA) Multi-driver Disable Register -#define AT91C_PIOA_PDR (0xFFFFF404) // (PIOA) PIO Disable Register -#define AT91C_PIOA_ODR (0xFFFFF414) // (PIOA) Output Disable Registerr -#define AT91C_PIOA_IFDR (0xFFFFF424) // (PIOA) Input Filter Disable Register -#define AT91C_PIOA_ABSR (0xFFFFF478) // (PIOA) AB Select Status Register -#define AT91C_PIOA_ASR (0xFFFFF470) // (PIOA) Select A Register -#define AT91C_PIOA_PPUSR (0xFFFFF468) // (PIOA) Pad Pull-up Status Register -#define AT91C_PIOA_ODSR (0xFFFFF438) // (PIOA) Output Data Status Register -#define AT91C_PIOA_SODR (0xFFFFF430) // (PIOA) Set Output Data Register -#define AT91C_PIOA_IFSR (0xFFFFF428) // (PIOA) Input Filter Status Register -#define AT91C_PIOA_IFER (0xFFFFF420) // (PIOA) Input Filter Enable Register -#define AT91C_PIOA_OSR (0xFFFFF418) // (PIOA) Output Status Register -#define AT91C_PIOA_IDR (0xFFFFF444) // (PIOA) Interrupt Disable Register -#define AT91C_PIOA_PDSR (0xFFFFF43C) // (PIOA) Pin Data Status Register -#define AT91C_PIOA_CODR (0xFFFFF434) // (PIOA) Clear Output Data Register -#define AT91C_PIOA_OWSR (0xFFFFF4A8) // (PIOA) Output Write Status Register -#define AT91C_PIOA_OWER (0xFFFFF4A0) // (PIOA) Output Write Enable Register -// ========== Register definition for DBGU peripheral ========== -#define AT91C_DBGU_C2R (0xFFFFF244) // (DBGU) Chip ID2 Register -#define AT91C_DBGU_THR (0xFFFFF21C) // (DBGU) Transmitter Holding Register -#define AT91C_DBGU_CSR (0xFFFFF214) // (DBGU) Channel Status Register -#define AT91C_DBGU_IDR (0xFFFFF20C) // (DBGU) Interrupt Disable Register -#define AT91C_DBGU_MR (0xFFFFF204) // (DBGU) Mode Register -#define AT91C_DBGU_FNTR (0xFFFFF248) // (DBGU) Force NTRST Register -#define AT91C_DBGU_C1R (0xFFFFF240) // (DBGU) Chip ID1 Register -#define AT91C_DBGU_BRGR (0xFFFFF220) // (DBGU) Baud Rate Generator Register -#define AT91C_DBGU_RHR (0xFFFFF218) // (DBGU) Receiver Holding Register -#define AT91C_DBGU_IMR (0xFFFFF210) // (DBGU) Interrupt Mask Register -#define AT91C_DBGU_IER (0xFFFFF208) // (DBGU) Interrupt Enable Register -#define AT91C_DBGU_CR (0xFFFFF200) // (DBGU) Control Register -// ========== Register definition for PDC_DBGU peripheral ========== -#define AT91C_DBGU_TNCR (0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register -#define AT91C_DBGU_RNCR (0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register -#define AT91C_DBGU_PTCR (0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register -#define AT91C_DBGU_PTSR (0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register -#define AT91C_DBGU_RCR (0xFFFFF304) // (PDC_DBGU) Receive Counter Register -#define AT91C_DBGU_TCR (0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register -#define AT91C_DBGU_RPR (0xFFFFF300) // (PDC_DBGU) Receive Pointer Register -#define AT91C_DBGU_TPR (0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register -#define AT91C_DBGU_RNPR (0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register -#define AT91C_DBGU_TNPR (0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register -// ========== Register definition for AIC peripheral ========== -#define AT91C_AIC_ICCR (0xFFFFF128) // (AIC) Interrupt Clear Command Register -#define AT91C_AIC_IECR (0xFFFFF120) // (AIC) Interrupt Enable Command Register -#define AT91C_AIC_SMR (0xFFFFF000) // (AIC) Source Mode Register -#define AT91C_AIC_ISCR (0xFFFFF12C) // (AIC) Interrupt Set Command Register -#define AT91C_AIC_EOICR (0xFFFFF130) // (AIC) End of Interrupt Command Register -#define AT91C_AIC_DCR (0xFFFFF138) // (AIC) Debug Control Register (Protect) -#define AT91C_AIC_FFER (0xFFFFF140) // (AIC) Fast Forcing Enable Register -#define AT91C_AIC_SVR (0xFFFFF080) // (AIC) Source Vector Register -#define AT91C_AIC_SPU (0xFFFFF134) // (AIC) Spurious Vector Register -#define AT91C_AIC_FFDR (0xFFFFF144) // (AIC) Fast Forcing Disable Register -#define AT91C_AIC_FVR (0xFFFFF104) // (AIC) FIQ Vector Register -#define AT91C_AIC_FFSR (0xFFFFF148) // (AIC) Fast Forcing Status Register -#define AT91C_AIC_IMR (0xFFFFF110) // (AIC) Interrupt Mask Register -#define AT91C_AIC_ISR (0xFFFFF108) // (AIC) Interrupt Status Register -#define AT91C_AIC_IVR (0xFFFFF100) // (AIC) IRQ Vector Register -#define AT91C_AIC_IDCR (0xFFFFF124) // (AIC) Interrupt Disable Command Register -#define AT91C_AIC_CISR (0xFFFFF114) // (AIC) Core Interrupt Status Register -#define AT91C_AIC_IPR (0xFFFFF10C) // (AIC) Interrupt Pending Register -// ========== Register definition for PDC_SPI peripheral ========== -#define AT91C_SPI_PTCR (0xFFFE0120) // (PDC_SPI) PDC Transfer Control Register -#define AT91C_SPI_TNPR (0xFFFE0118) // (PDC_SPI) Transmit Next Pointer Register -#define AT91C_SPI_RNPR (0xFFFE0110) // (PDC_SPI) Receive Next Pointer Register -#define AT91C_SPI_TPR (0xFFFE0108) // (PDC_SPI) Transmit Pointer Register -#define AT91C_SPI_RPR (0xFFFE0100) // (PDC_SPI) Receive Pointer Register -#define AT91C_SPI_PTSR (0xFFFE0124) // (PDC_SPI) PDC Transfer Status Register -#define AT91C_SPI_TNCR (0xFFFE011C) // (PDC_SPI) Transmit Next Counter Register -#define AT91C_SPI_RNCR (0xFFFE0114) // (PDC_SPI) Receive Next Counter Register -#define AT91C_SPI_TCR (0xFFFE010C) // (PDC_SPI) Transmit Counter Register -#define AT91C_SPI_RCR (0xFFFE0104) // (PDC_SPI) Receive Counter Register -// ========== Register definition for SPI peripheral ========== -#define AT91C_SPI_CSR (0xFFFE0030) // (SPI) Chip Select Register -#define AT91C_SPI_IDR (0xFFFE0018) // (SPI) Interrupt Disable Register -#define AT91C_SPI_SR (0xFFFE0010) // (SPI) Status Register -#define AT91C_SPI_RDR (0xFFFE0008) // (SPI) Receive Data Register -#define AT91C_SPI_CR (0xFFFE0000) // (SPI) Control Register -#define AT91C_SPI_IMR (0xFFFE001C) // (SPI) Interrupt Mask Register -#define AT91C_SPI_IER (0xFFFE0014) // (SPI) Interrupt Enable Register -#define AT91C_SPI_TDR (0xFFFE000C) // (SPI) Transmit Data Register -#define AT91C_SPI_MR (0xFFFE0004) // (SPI) Mode Register -// ========== Register definition for PDC_SSC2 peripheral ========== -#define AT91C_SSC2_PTCR (0xFFFD8120) // (PDC_SSC2) PDC Transfer Control Register -#define AT91C_SSC2_TNPR (0xFFFD8118) // (PDC_SSC2) Transmit Next Pointer Register -#define AT91C_SSC2_RNPR (0xFFFD8110) // (PDC_SSC2) Receive Next Pointer Register -#define AT91C_SSC2_TPR (0xFFFD8108) // (PDC_SSC2) Transmit Pointer Register -#define AT91C_SSC2_RPR (0xFFFD8100) // (PDC_SSC2) Receive Pointer Register -#define AT91C_SSC2_PTSR (0xFFFD8124) // (PDC_SSC2) PDC Transfer Status Register -#define AT91C_SSC2_TNCR (0xFFFD811C) // (PDC_SSC2) Transmit Next Counter Register -#define AT91C_SSC2_RNCR (0xFFFD8114) // (PDC_SSC2) Receive Next Counter Register -#define AT91C_SSC2_TCR (0xFFFD810C) // (PDC_SSC2) Transmit Counter Register -#define AT91C_SSC2_RCR (0xFFFD8104) // (PDC_SSC2) Receive Counter Register -// ========== Register definition for SSC2 peripheral ========== -#define AT91C_SSC2_IMR (0xFFFD804C) // (SSC2) Interrupt Mask Register -#define AT91C_SSC2_IER (0xFFFD8044) // (SSC2) Interrupt Enable Register -#define AT91C_SSC2_RC1R (0xFFFD803C) // (SSC2) Receive Compare 1 Register -#define AT91C_SSC2_TSHR (0xFFFD8034) // (SSC2) Transmit Sync Holding Register -#define AT91C_SSC2_CMR (0xFFFD8004) // (SSC2) Clock Mode Register -#define AT91C_SSC2_IDR (0xFFFD8048) // (SSC2) Interrupt Disable Register -#define AT91C_SSC2_TCMR (0xFFFD8018) // (SSC2) Transmit Clock Mode Register -#define AT91C_SSC2_RCMR (0xFFFD8010) // (SSC2) Receive Clock ModeRegister -#define AT91C_SSC2_CR (0xFFFD8000) // (SSC2) Control Register -#define AT91C_SSC2_RFMR (0xFFFD8014) // (SSC2) Receive Frame Mode Register -#define AT91C_SSC2_TFMR (0xFFFD801C) // (SSC2) Transmit Frame Mode Register -#define AT91C_SSC2_THR (0xFFFD8024) // (SSC2) Transmit Holding Register -#define AT91C_SSC2_SR (0xFFFD8040) // (SSC2) Status Register -#define AT91C_SSC2_RC0R (0xFFFD8038) // (SSC2) Receive Compare 0 Register -#define AT91C_SSC2_RSHR (0xFFFD8030) // (SSC2) Receive Sync Holding Register -#define AT91C_SSC2_RHR (0xFFFD8020) // (SSC2) Receive Holding Register -// ========== Register definition for PDC_SSC1 peripheral ========== -#define AT91C_SSC1_PTCR (0xFFFD4120) // (PDC_SSC1) PDC Transfer Control Register -#define AT91C_SSC1_TNPR (0xFFFD4118) // (PDC_SSC1) Transmit Next Pointer Register -#define AT91C_SSC1_RNPR (0xFFFD4110) // (PDC_SSC1) Receive Next Pointer Register -#define AT91C_SSC1_TPR (0xFFFD4108) // (PDC_SSC1) Transmit Pointer Register -#define AT91C_SSC1_RPR (0xFFFD4100) // (PDC_SSC1) Receive Pointer Register -#define AT91C_SSC1_PTSR (0xFFFD4124) // (PDC_SSC1) PDC Transfer Status Register -#define AT91C_SSC1_TNCR (0xFFFD411C) // (PDC_SSC1) Transmit Next Counter Register -#define AT91C_SSC1_RNCR (0xFFFD4114) // (PDC_SSC1) Receive Next Counter Register -#define AT91C_SSC1_TCR (0xFFFD410C) // (PDC_SSC1) Transmit Counter Register -#define AT91C_SSC1_RCR (0xFFFD4104) // (PDC_SSC1) Receive Counter Register -// ========== Register definition for SSC1 peripheral ========== -#define AT91C_SSC1_RFMR (0xFFFD4014) // (SSC1) Receive Frame Mode Register -#define AT91C_SSC1_CMR (0xFFFD4004) // (SSC1) Clock Mode Register -#define AT91C_SSC1_IDR (0xFFFD4048) // (SSC1) Interrupt Disable Register -#define AT91C_SSC1_SR (0xFFFD4040) // (SSC1) Status Register -#define AT91C_SSC1_RC0R (0xFFFD4038) // (SSC1) Receive Compare 0 Register -#define AT91C_SSC1_RSHR (0xFFFD4030) // (SSC1) Receive Sync Holding Register -#define AT91C_SSC1_RHR (0xFFFD4020) // (SSC1) Receive Holding Register -#define AT91C_SSC1_TCMR (0xFFFD4018) // (SSC1) Transmit Clock Mode Register -#define AT91C_SSC1_RCMR (0xFFFD4010) // (SSC1) Receive Clock ModeRegister -#define AT91C_SSC1_CR (0xFFFD4000) // (SSC1) Control Register -#define AT91C_SSC1_IMR (0xFFFD404C) // (SSC1) Interrupt Mask Register -#define AT91C_SSC1_IER (0xFFFD4044) // (SSC1) Interrupt Enable Register -#define AT91C_SSC1_RC1R (0xFFFD403C) // (SSC1) Receive Compare 1 Register -#define AT91C_SSC1_TSHR (0xFFFD4034) // (SSC1) Transmit Sync Holding Register -#define AT91C_SSC1_THR (0xFFFD4024) // (SSC1) Transmit Holding Register -#define AT91C_SSC1_TFMR (0xFFFD401C) // (SSC1) Transmit Frame Mode Register -// ========== Register definition for PDC_SSC0 peripheral ========== -#define AT91C_SSC0_PTCR (0xFFFD0120) // (PDC_SSC0) PDC Transfer Control Register -#define AT91C_SSC0_TNPR (0xFFFD0118) // (PDC_SSC0) Transmit Next Pointer Register -#define AT91C_SSC0_RNPR (0xFFFD0110) // (PDC_SSC0) Receive Next Pointer Register -#define AT91C_SSC0_TPR (0xFFFD0108) // (PDC_SSC0) Transmit Pointer Register -#define AT91C_SSC0_RPR (0xFFFD0100) // (PDC_SSC0) Receive Pointer Register -#define AT91C_SSC0_PTSR (0xFFFD0124) // (PDC_SSC0) PDC Transfer Status Register -#define AT91C_SSC0_TNCR (0xFFFD011C) // (PDC_SSC0) Transmit Next Counter Register -#define AT91C_SSC0_RNCR (0xFFFD0114) // (PDC_SSC0) Receive Next Counter Register -#define AT91C_SSC0_TCR (0xFFFD010C) // (PDC_SSC0) Transmit Counter Register -#define AT91C_SSC0_RCR (0xFFFD0104) // (PDC_SSC0) Receive Counter Register -// ========== Register definition for SSC0 peripheral ========== -#define AT91C_SSC0_IMR (0xFFFD004C) // (SSC0) Interrupt Mask Register -#define AT91C_SSC0_IER (0xFFFD0044) // (SSC0) Interrupt Enable Register -#define AT91C_SSC0_RC1R (0xFFFD003C) // (SSC0) Receive Compare 1 Register -#define AT91C_SSC0_TSHR (0xFFFD0034) // (SSC0) Transmit Sync Holding Register -#define AT91C_SSC0_THR (0xFFFD0024) // (SSC0) Transmit Holding Register -#define AT91C_SSC0_TFMR (0xFFFD001C) // (SSC0) Transmit Frame Mode Register -#define AT91C_SSC0_RFMR (0xFFFD0014) // (SSC0) Receive Frame Mode Register -#define AT91C_SSC0_CMR (0xFFFD0004) // (SSC0) Clock Mode Register -#define AT91C_SSC0_IDR (0xFFFD0048) // (SSC0) Interrupt Disable Register -#define AT91C_SSC0_SR (0xFFFD0040) // (SSC0) Status Register -#define AT91C_SSC0_RC0R (0xFFFD0038) // (SSC0) Receive Compare 0 Register -#define AT91C_SSC0_RSHR (0xFFFD0030) // (SSC0) Receive Sync Holding Register -#define AT91C_SSC0_RHR (0xFFFD0020) // (SSC0) Receive Holding Register -#define AT91C_SSC0_TCMR (0xFFFD0018) // (SSC0) Transmit Clock Mode Register -#define AT91C_SSC0_RCMR (0xFFFD0010) // (SSC0) Receive Clock ModeRegister -#define AT91C_SSC0_CR (0xFFFD0000) // (SSC0) Control Register -// ========== Register definition for PDC_US3 peripheral ========== -#define AT91C_US3_PTSR (0xFFFCC124) // (PDC_US3) PDC Transfer Status Register -#define AT91C_US3_TNCR (0xFFFCC11C) // (PDC_US3) Transmit Next Counter Register -#define AT91C_US3_RNCR (0xFFFCC114) // (PDC_US3) Receive Next Counter Register -#define AT91C_US3_TCR (0xFFFCC10C) // (PDC_US3) Transmit Counter Register -#define AT91C_US3_RCR (0xFFFCC104) // (PDC_US3) Receive Counter Register -#define AT91C_US3_PTCR (0xFFFCC120) // (PDC_US3) PDC Transfer Control Register -#define AT91C_US3_TNPR (0xFFFCC118) // (PDC_US3) Transmit Next Pointer Register -#define AT91C_US3_RNPR (0xFFFCC110) // (PDC_US3) Receive Next Pointer Register -#define AT91C_US3_TPR (0xFFFCC108) // (PDC_US3) Transmit Pointer Register -#define AT91C_US3_RPR (0xFFFCC100) // (PDC_US3) Receive Pointer Register -// ========== Register definition for US3 peripheral ========== -#define AT91C_US3_IF (0xFFFCC04C) // (US3) IRDA_FILTER Register -#define AT91C_US3_NER (0xFFFCC044) // (US3) Nb Errors Register -#define AT91C_US3_RTOR (0xFFFCC024) // (US3) Receiver Time-out Register -#define AT91C_US3_THR (0xFFFCC01C) // (US3) Transmitter Holding Register -#define AT91C_US3_CSR (0xFFFCC014) // (US3) Channel Status Register -#define AT91C_US3_IDR (0xFFFCC00C) // (US3) Interrupt Disable Register -#define AT91C_US3_MR (0xFFFCC004) // (US3) Mode Register -#define AT91C_US3_XXR (0xFFFCC048) // (US3) XON_XOFF Register -#define AT91C_US3_FIDI (0xFFFCC040) // (US3) FI_DI_Ratio Register -#define AT91C_US3_TTGR (0xFFFCC028) // (US3) Transmitter Time-guard Register -#define AT91C_US3_BRGR (0xFFFCC020) // (US3) Baud Rate Generator Register -#define AT91C_US3_RHR (0xFFFCC018) // (US3) Receiver Holding Register -#define AT91C_US3_IMR (0xFFFCC010) // (US3) Interrupt Mask Register -#define AT91C_US3_IER (0xFFFCC008) // (US3) Interrupt Enable Register -#define AT91C_US3_CR (0xFFFCC000) // (US3) Control Register -// ========== Register definition for PDC_US2 peripheral ========== -#define AT91C_US2_PTSR (0xFFFC8124) // (PDC_US2) PDC Transfer Status Register -#define AT91C_US2_TNCR (0xFFFC811C) // (PDC_US2) Transmit Next Counter Register -#define AT91C_US2_RNCR (0xFFFC8114) // (PDC_US2) Receive Next Counter Register -#define AT91C_US2_TCR (0xFFFC810C) // (PDC_US2) Transmit Counter Register -#define AT91C_US2_PTCR (0xFFFC8120) // (PDC_US2) PDC Transfer Control Register -#define AT91C_US2_RCR (0xFFFC8104) // (PDC_US2) Receive Counter Register -#define AT91C_US2_TNPR (0xFFFC8118) // (PDC_US2) Transmit Next Pointer Register -#define AT91C_US2_RPR (0xFFFC8100) // (PDC_US2) Receive Pointer Register -#define AT91C_US2_TPR (0xFFFC8108) // (PDC_US2) Transmit Pointer Register -#define AT91C_US2_RNPR (0xFFFC8110) // (PDC_US2) Receive Next Pointer Register -// ========== Register definition for US2 peripheral ========== -#define AT91C_US2_XXR (0xFFFC8048) // (US2) XON_XOFF Register -#define AT91C_US2_FIDI (0xFFFC8040) // (US2) FI_DI_Ratio Register -#define AT91C_US2_TTGR (0xFFFC8028) // (US2) Transmitter Time-guard Register -#define AT91C_US2_BRGR (0xFFFC8020) // (US2) Baud Rate Generator Register -#define AT91C_US2_RHR (0xFFFC8018) // (US2) Receiver Holding Register -#define AT91C_US2_IMR (0xFFFC8010) // (US2) Interrupt Mask Register -#define AT91C_US2_IER (0xFFFC8008) // (US2) Interrupt Enable Register -#define AT91C_US2_CR (0xFFFC8000) // (US2) Control Register -#define AT91C_US2_IF (0xFFFC804C) // (US2) IRDA_FILTER Register -#define AT91C_US2_NER (0xFFFC8044) // (US2) Nb Errors Register -#define AT91C_US2_RTOR (0xFFFC8024) // (US2) Receiver Time-out Register -#define AT91C_US2_THR (0xFFFC801C) // (US2) Transmitter Holding Register -#define AT91C_US2_CSR (0xFFFC8014) // (US2) Channel Status Register -#define AT91C_US2_IDR (0xFFFC800C) // (US2) Interrupt Disable Register -#define AT91C_US2_MR (0xFFFC8004) // (US2) Mode Register -// ========== Register definition for PDC_US1 peripheral ========== -#define AT91C_US1_PTSR (0xFFFC4124) // (PDC_US1) PDC Transfer Status Register -#define AT91C_US1_TNCR (0xFFFC411C) // (PDC_US1) Transmit Next Counter Register -#define AT91C_US1_RNCR (0xFFFC4114) // (PDC_US1) Receive Next Counter Register -#define AT91C_US1_TCR (0xFFFC410C) // (PDC_US1) Transmit Counter Register -#define AT91C_US1_RCR (0xFFFC4104) // (PDC_US1) Receive Counter Register -#define AT91C_US1_PTCR (0xFFFC4120) // (PDC_US1) PDC Transfer Control Register -#define AT91C_US1_TNPR (0xFFFC4118) // (PDC_US1) Transmit Next Pointer Register -#define AT91C_US1_RNPR (0xFFFC4110) // (PDC_US1) Receive Next Pointer Register -#define AT91C_US1_TPR (0xFFFC4108) // (PDC_US1) Transmit Pointer Register -#define AT91C_US1_RPR (0xFFFC4100) // (PDC_US1) Receive Pointer Register -// ========== Register definition for US1 peripheral ========== -#define AT91C_US1_XXR (0xFFFC4048) // (US1) XON_XOFF Register -#define AT91C_US1_RHR (0xFFFC4018) // (US1) Receiver Holding Register -#define AT91C_US1_IMR (0xFFFC4010) // (US1) Interrupt Mask Register -#define AT91C_US1_IER (0xFFFC4008) // (US1) Interrupt Enable Register -#define AT91C_US1_CR (0xFFFC4000) // (US1) Control Register -#define AT91C_US1_RTOR (0xFFFC4024) // (US1) Receiver Time-out Register -#define AT91C_US1_THR (0xFFFC401C) // (US1) Transmitter Holding Register -#define AT91C_US1_CSR (0xFFFC4014) // (US1) Channel Status Register -#define AT91C_US1_IDR (0xFFFC400C) // (US1) Interrupt Disable Register -#define AT91C_US1_FIDI (0xFFFC4040) // (US1) FI_DI_Ratio Register -#define AT91C_US1_BRGR (0xFFFC4020) // (US1) Baud Rate Generator Register -#define AT91C_US1_TTGR (0xFFFC4028) // (US1) Transmitter Time-guard Register -#define AT91C_US1_IF (0xFFFC404C) // (US1) IRDA_FILTER Register -#define AT91C_US1_NER (0xFFFC4044) // (US1) Nb Errors Register -#define AT91C_US1_MR (0xFFFC4004) // (US1) Mode Register -// ========== Register definition for PDC_US0 peripheral ========== -#define AT91C_US0_PTCR (0xFFFC0120) // (PDC_US0) PDC Transfer Control Register -#define AT91C_US0_TNPR (0xFFFC0118) // (PDC_US0) Transmit Next Pointer Register -#define AT91C_US0_RNPR (0xFFFC0110) // (PDC_US0) Receive Next Pointer Register -#define AT91C_US0_TPR (0xFFFC0108) // (PDC_US0) Transmit Pointer Register -#define AT91C_US0_RPR (0xFFFC0100) // (PDC_US0) Receive Pointer Register -#define AT91C_US0_PTSR (0xFFFC0124) // (PDC_US0) PDC Transfer Status Register -#define AT91C_US0_TNCR (0xFFFC011C) // (PDC_US0) Transmit Next Counter Register -#define AT91C_US0_RNCR (0xFFFC0114) // (PDC_US0) Receive Next Counter Register -#define AT91C_US0_TCR (0xFFFC010C) // (PDC_US0) Transmit Counter Register -#define AT91C_US0_RCR (0xFFFC0104) // (PDC_US0) Receive Counter Register -// ========== Register definition for US0 peripheral ========== -#define AT91C_US0_TTGR (0xFFFC0028) // (US0) Transmitter Time-guard Register -#define AT91C_US0_BRGR (0xFFFC0020) // (US0) Baud Rate Generator Register -#define AT91C_US0_RHR (0xFFFC0018) // (US0) Receiver Holding Register -#define AT91C_US0_IMR (0xFFFC0010) // (US0) Interrupt Mask Register -#define AT91C_US0_NER (0xFFFC0044) // (US0) Nb Errors Register -#define AT91C_US0_RTOR (0xFFFC0024) // (US0) Receiver Time-out Register -#define AT91C_US0_XXR (0xFFFC0048) // (US0) XON_XOFF Register -#define AT91C_US0_FIDI (0xFFFC0040) // (US0) FI_DI_Ratio Register -#define AT91C_US0_CR (0xFFFC0000) // (US0) Control Register -#define AT91C_US0_IER (0xFFFC0008) // (US0) Interrupt Enable Register -#define AT91C_US0_IF (0xFFFC004C) // (US0) IRDA_FILTER Register -#define AT91C_US0_MR (0xFFFC0004) // (US0) Mode Register -#define AT91C_US0_IDR (0xFFFC000C) // (US0) Interrupt Disable Register -#define AT91C_US0_CSR (0xFFFC0014) // (US0) Channel Status Register -#define AT91C_US0_THR (0xFFFC001C) // (US0) Transmitter Holding Register -// ========== Register definition for TWI peripheral ========== -#define AT91C_TWI_RHR (0xFFFB8030) // (TWI) Receive Holding Register -#define AT91C_TWI_IDR (0xFFFB8028) // (TWI) Interrupt Disable Register -#define AT91C_TWI_SR (0xFFFB8020) // (TWI) Status Register -#define AT91C_TWI_CWGR (0xFFFB8010) // (TWI) Clock Waveform Generator Register -#define AT91C_TWI_SMR (0xFFFB8008) // (TWI) Slave Mode Register -#define AT91C_TWI_CR (0xFFFB8000) // (TWI) Control Register -#define AT91C_TWI_THR (0xFFFB8034) // (TWI) Transmit Holding Register -#define AT91C_TWI_IMR (0xFFFB802C) // (TWI) Interrupt Mask Register -#define AT91C_TWI_IER (0xFFFB8024) // (TWI) Interrupt Enable Register -#define AT91C_TWI_IADR (0xFFFB800C) // (TWI) Internal Address Register -#define AT91C_TWI_MMR (0xFFFB8004) // (TWI) Master Mode Register -// ========== Register definition for PDC_MCI peripheral ========== -#define AT91C_MCI_PTCR (0xFFFB4120) // (PDC_MCI) PDC Transfer Control Register -#define AT91C_MCI_TNPR (0xFFFB4118) // (PDC_MCI) Transmit Next Pointer Register -#define AT91C_MCI_RNPR (0xFFFB4110) // (PDC_MCI) Receive Next Pointer Register -#define AT91C_MCI_TPR (0xFFFB4108) // (PDC_MCI) Transmit Pointer Register -#define AT91C_MCI_RPR (0xFFFB4100) // (PDC_MCI) Receive Pointer Register -#define AT91C_MCI_PTSR (0xFFFB4124) // (PDC_MCI) PDC Transfer Status Register -#define AT91C_MCI_TNCR (0xFFFB411C) // (PDC_MCI) Transmit Next Counter Register -#define AT91C_MCI_RNCR (0xFFFB4114) // (PDC_MCI) Receive Next Counter Register -#define AT91C_MCI_TCR (0xFFFB410C) // (PDC_MCI) Transmit Counter Register -#define AT91C_MCI_RCR (0xFFFB4104) // (PDC_MCI) Receive Counter Register -// ========== Register definition for MCI peripheral ========== -#define AT91C_MCI_IDR (0xFFFB4048) // (MCI) MCI Interrupt Disable Register -#define AT91C_MCI_SR (0xFFFB4040) // (MCI) MCI Status Register -#define AT91C_MCI_RDR (0xFFFB4030) // (MCI) MCI Receive Data Register -#define AT91C_MCI_RSPR (0xFFFB4020) // (MCI) MCI Response Register -#define AT91C_MCI_ARGR (0xFFFB4010) // (MCI) MCI Argument Register -#define AT91C_MCI_DTOR (0xFFFB4008) // (MCI) MCI Data Timeout Register -#define AT91C_MCI_CR (0xFFFB4000) // (MCI) MCI Control Register -#define AT91C_MCI_IMR (0xFFFB404C) // (MCI) MCI Interrupt Mask Register -#define AT91C_MCI_IER (0xFFFB4044) // (MCI) MCI Interrupt Enable Register -#define AT91C_MCI_TDR (0xFFFB4034) // (MCI) MCI Transmit Data Register -#define AT91C_MCI_CMDR (0xFFFB4014) // (MCI) MCI Command Register -#define AT91C_MCI_SDCR (0xFFFB400C) // (MCI) MCI SD Card Register -#define AT91C_MCI_MR (0xFFFB4004) // (MCI) MCI Mode Register -// ========== Register definition for UDP peripheral ========== -#define AT91C_UDP_ISR (0xFFFB001C) // (UDP) Interrupt Status Register -#define AT91C_UDP_IDR (0xFFFB0014) // (UDP) Interrupt Disable Register -#define AT91C_UDP_GLBSTATE (0xFFFB0004) // (UDP) Global State Register -#define AT91C_UDP_FDR (0xFFFB0050) // (UDP) Endpoint FIFO Data Register -#define AT91C_UDP_CSR (0xFFFB0030) // (UDP) Endpoint Control and Status Register -#define AT91C_UDP_RSTEP (0xFFFB0028) // (UDP) Reset Endpoint Register -#define AT91C_UDP_ICR (0xFFFB0020) // (UDP) Interrupt Clear Register -#define AT91C_UDP_IMR (0xFFFB0018) // (UDP) Interrupt Mask Register -#define AT91C_UDP_IER (0xFFFB0010) // (UDP) Interrupt Enable Register -#define AT91C_UDP_FADDR (0xFFFB0008) // (UDP) Function Address Register -#define AT91C_UDP_NUM (0xFFFB0000) // (UDP) Frame Number Register -// ========== Register definition for TC5 peripheral ========== -#define AT91C_TC5_CMR (0xFFFA4084) // (TC5) Channel Mode Register -#define AT91C_TC5_IDR (0xFFFA40A8) // (TC5) Interrupt Disable Register -#define AT91C_TC5_SR (0xFFFA40A0) // (TC5) Status Register -#define AT91C_TC5_RB (0xFFFA4098) // (TC5) Register B -#define AT91C_TC5_CV (0xFFFA4090) // (TC5) Counter Value -#define AT91C_TC5_CCR (0xFFFA4080) // (TC5) Channel Control Register -#define AT91C_TC5_IMR (0xFFFA40AC) // (TC5) Interrupt Mask Register -#define AT91C_TC5_IER (0xFFFA40A4) // (TC5) Interrupt Enable Register -#define AT91C_TC5_RC (0xFFFA409C) // (TC5) Register C -#define AT91C_TC5_RA (0xFFFA4094) // (TC5) Register A -// ========== Register definition for TC4 peripheral ========== -#define AT91C_TC4_IMR (0xFFFA406C) // (TC4) Interrupt Mask Register -#define AT91C_TC4_IER (0xFFFA4064) // (TC4) Interrupt Enable Register -#define AT91C_TC4_RC (0xFFFA405C) // (TC4) Register C -#define AT91C_TC4_RA (0xFFFA4054) // (TC4) Register A -#define AT91C_TC4_CMR (0xFFFA4044) // (TC4) Channel Mode Register -#define AT91C_TC4_IDR (0xFFFA4068) // (TC4) Interrupt Disable Register -#define AT91C_TC4_SR (0xFFFA4060) // (TC4) Status Register -#define AT91C_TC4_RB (0xFFFA4058) // (TC4) Register B -#define AT91C_TC4_CV (0xFFFA4050) // (TC4) Counter Value -#define AT91C_TC4_CCR (0xFFFA4040) // (TC4) Channel Control Register -// ========== Register definition for TC3 peripheral ========== -#define AT91C_TC3_IMR (0xFFFA402C) // (TC3) Interrupt Mask Register -#define AT91C_TC3_CV (0xFFFA4010) // (TC3) Counter Value -#define AT91C_TC3_CCR (0xFFFA4000) // (TC3) Channel Control Register -#define AT91C_TC3_IER (0xFFFA4024) // (TC3) Interrupt Enable Register -#define AT91C_TC3_CMR (0xFFFA4004) // (TC3) Channel Mode Register -#define AT91C_TC3_RA (0xFFFA4014) // (TC3) Register A -#define AT91C_TC3_RC (0xFFFA401C) // (TC3) Register C -#define AT91C_TC3_IDR (0xFFFA4028) // (TC3) Interrupt Disable Register -#define AT91C_TC3_RB (0xFFFA4018) // (TC3) Register B -#define AT91C_TC3_SR (0xFFFA4020) // (TC3) Status Register -// ========== Register definition for TCB1 peripheral ========== -#define AT91C_TCB1_BCR (0xFFFA4140) // (TCB1) TC Block Control Register -#define AT91C_TCB1_BMR (0xFFFA4144) // (TCB1) TC Block Mode Register -// ========== Register definition for TC2 peripheral ========== -#define AT91C_TC2_IMR (0xFFFA00AC) // (TC2) Interrupt Mask Register -#define AT91C_TC2_IER (0xFFFA00A4) // (TC2) Interrupt Enable Register -#define AT91C_TC2_RC (0xFFFA009C) // (TC2) Register C -#define AT91C_TC2_RA (0xFFFA0094) // (TC2) Register A -#define AT91C_TC2_CMR (0xFFFA0084) // (TC2) Channel Mode Register -#define AT91C_TC2_IDR (0xFFFA00A8) // (TC2) Interrupt Disable Register -#define AT91C_TC2_SR (0xFFFA00A0) // (TC2) Status Register -#define AT91C_TC2_RB (0xFFFA0098) // (TC2) Register B -#define AT91C_TC2_CV (0xFFFA0090) // (TC2) Counter Value -#define AT91C_TC2_CCR (0xFFFA0080) // (TC2) Channel Control Register -// ========== Register definition for TC1 peripheral ========== -#define AT91C_TC1_IMR (0xFFFA006C) // (TC1) Interrupt Mask Register -#define AT91C_TC1_IER (0xFFFA0064) // (TC1) Interrupt Enable Register -#define AT91C_TC1_RC (0xFFFA005C) // (TC1) Register C -#define AT91C_TC1_RA (0xFFFA0054) // (TC1) Register A -#define AT91C_TC1_CMR (0xFFFA0044) // (TC1) Channel Mode Register -#define AT91C_TC1_IDR (0xFFFA0068) // (TC1) Interrupt Disable Register -#define AT91C_TC1_SR (0xFFFA0060) // (TC1) Status Register -#define AT91C_TC1_RB (0xFFFA0058) // (TC1) Register B -#define AT91C_TC1_CV (0xFFFA0050) // (TC1) Counter Value -#define AT91C_TC1_CCR (0xFFFA0040) // (TC1) Channel Control Register -// ========== Register definition for TC0 peripheral ========== -#define AT91C_TC0_IMR (0xFFFA002C) // (TC0) Interrupt Mask Register -#define AT91C_TC0_IER (0xFFFA0024) // (TC0) Interrupt Enable Register -#define AT91C_TC0_RC (0xFFFA001C) // (TC0) Register C -#define AT91C_TC0_RA (0xFFFA0014) // (TC0) Register A -#define AT91C_TC0_CMR (0xFFFA0004) // (TC0) Channel Mode Register -#define AT91C_TC0_IDR (0xFFFA0028) // (TC0) Interrupt Disable Register -#define AT91C_TC0_SR (0xFFFA0020) // (TC0) Status Register -#define AT91C_TC0_RB (0xFFFA0018) // (TC0) Register B -#define AT91C_TC0_CV (0xFFFA0010) // (TC0) Counter Value -#define AT91C_TC0_CCR (0xFFFA0000) // (TC0) Channel Control Register -// ========== Register definition for TCB0 peripheral ========== -#define AT91C_TCB0_BMR (0xFFFA00C4) // (TCB0) TC Block Mode Register -#define AT91C_TCB0_BCR (0xFFFA00C0) // (TCB0) TC Block Control Register -// ========== Register definition for UHP peripheral ========== -#define AT91C_UHP_HcRhDescriptorA (0x00300048) // (UHP) Root Hub characteristics A -#define AT91C_UHP_HcRhPortStatus (0x00300054) // (UHP) Root Hub Port Status Register -#define AT91C_UHP_HcRhDescriptorB (0x0030004C) // (UHP) Root Hub characteristics B -#define AT91C_UHP_HcControl (0x00300004) // (UHP) Operating modes for the Host Controller -#define AT91C_UHP_HcInterruptStatus (0x0030000C) // (UHP) Interrupt Status Register -#define AT91C_UHP_HcRhStatus (0x00300050) // (UHP) Root Hub Status register -#define AT91C_UHP_HcRevision (0x00300000) // (UHP) Revision -#define AT91C_UHP_HcCommandStatus (0x00300008) // (UHP) Command & status Register -#define AT91C_UHP_HcInterruptEnable (0x00300010) // (UHP) Interrupt Enable Register -#define AT91C_UHP_HcHCCA (0x00300018) // (UHP) Pointer to the Host Controller Communication Area -#define AT91C_UHP_HcControlHeadED (0x00300020) // (UHP) First Endpoint Descriptor of the Control list -#define AT91C_UHP_HcInterruptDisable (0x00300014) // (UHP) Interrupt Disable Register -#define AT91C_UHP_HcPeriodCurrentED (0x0030001C) // (UHP) Current Isochronous or Interrupt Endpoint Descriptor -#define AT91C_UHP_HcControlCurrentED (0x00300024) // (UHP) Endpoint Control and Status Register -#define AT91C_UHP_HcBulkCurrentED (0x0030002C) // (UHP) Current endpoint of the Bulk list -#define AT91C_UHP_HcFmInterval (0x00300034) // (UHP) Bit time between 2 consecutive SOFs -#define AT91C_UHP_HcBulkHeadED (0x00300028) // (UHP) First endpoint register of the Bulk list -#define AT91C_UHP_HcBulkDoneHead (0x00300030) // (UHP) Last completed transfer descriptor -#define AT91C_UHP_HcFmRemaining (0x00300038) // (UHP) Bit time remaining in the current Frame -#define AT91C_UHP_HcPeriodicStart (0x00300040) // (UHP) Periodic Start -#define AT91C_UHP_HcLSThreshold (0x00300044) // (UHP) LS Threshold -#define AT91C_UHP_HcFmNumber (0x0030003C) // (UHP) Frame number -// ========== Register definition for EMAC peripheral ========== -#define AT91C_EMAC_RSR (0xFFFBC020) // (EMAC) Receive Status Register -#define AT91C_EMAC_MAN (0xFFFBC034) // (EMAC) PHY Maintenance Register -#define AT91C_EMAC_HSH (0xFFFBC090) // (EMAC) Hash Address High[63:32] -#define AT91C_EMAC_MCOL (0xFFFBC048) // (EMAC) Multiple Collision Frame Register -#define AT91C_EMAC_IER (0xFFFBC028) // (EMAC) Interrupt Enable Register -#define AT91C_EMAC_SA2H (0xFFFBC0A4) // (EMAC) Specific Address 2 High, Last 2 bytes -#define AT91C_EMAC_HSL (0xFFFBC094) // (EMAC) Hash Address Low[31:0] -#define AT91C_EMAC_LCOL (0xFFFBC05C) // (EMAC) Late Collision Register -#define AT91C_EMAC_OK (0xFFFBC04C) // (EMAC) Frames Received OK Register -#define AT91C_EMAC_CFG (0xFFFBC004) // (EMAC) Network Configuration Register -#define AT91C_EMAC_SA3L (0xFFFBC0A8) // (EMAC) Specific Address 3 Low, First 4 bytes -#define AT91C_EMAC_SEQE (0xFFFBC050) // (EMAC) Frame Check Sequence Error Register -#define AT91C_EMAC_ECOL (0xFFFBC060) // (EMAC) Excessive Collision Register -#define AT91C_EMAC_ELR (0xFFFBC070) // (EMAC) Excessive Length Error Register -#define AT91C_EMAC_SR (0xFFFBC008) // (EMAC) Network Status Register -#define AT91C_EMAC_RBQP (0xFFFBC018) // (EMAC) Receive Buffer Queue Pointer -#define AT91C_EMAC_CSE (0xFFFBC064) // (EMAC) Carrier Sense Error Register -#define AT91C_EMAC_RJB (0xFFFBC074) // (EMAC) Receive Jabber Register -#define AT91C_EMAC_USF (0xFFFBC078) // (EMAC) Undersize Frame Register -#define AT91C_EMAC_IDR (0xFFFBC02C) // (EMAC) Interrupt Disable Register -#define AT91C_EMAC_SA1L (0xFFFBC098) // (EMAC) Specific Address 1 Low, First 4 bytes -#define AT91C_EMAC_IMR (0xFFFBC030) // (EMAC) Interrupt Mask Register -#define AT91C_EMAC_FRA (0xFFFBC040) // (EMAC) Frames Transmitted OK Register -#define AT91C_EMAC_SA3H (0xFFFBC0AC) // (EMAC) Specific Address 3 High, Last 2 bytes -#define AT91C_EMAC_SA1H (0xFFFBC09C) // (EMAC) Specific Address 1 High, Last 2 bytes -#define AT91C_EMAC_SCOL (0xFFFBC044) // (EMAC) Single Collision Frame Register -#define AT91C_EMAC_ALE (0xFFFBC054) // (EMAC) Alignment Error Register -#define AT91C_EMAC_TAR (0xFFFBC00C) // (EMAC) Transmit Address Register -#define AT91C_EMAC_SA4L (0xFFFBC0B0) // (EMAC) Specific Address 4 Low, First 4 bytes -#define AT91C_EMAC_SA2L (0xFFFBC0A0) // (EMAC) Specific Address 2 Low, First 4 bytes -#define AT91C_EMAC_TUE (0xFFFBC068) // (EMAC) Transmit Underrun Error Register -#define AT91C_EMAC_DTE (0xFFFBC058) // (EMAC) Deferred Transmission Frame Register -#define AT91C_EMAC_TCR (0xFFFBC010) // (EMAC) Transmit Control Register -#define AT91C_EMAC_CTL (0xFFFBC000) // (EMAC) Network Control Register -#define AT91C_EMAC_SA4H (0xFFFBC0B4) // (EMAC) Specific Address 4 High, Last 2 bytesr -#define AT91C_EMAC_CDE (0xFFFBC06C) // (EMAC) Code Error Register -#define AT91C_EMAC_SQEE (0xFFFBC07C) // (EMAC) SQE Test Error Register -#define AT91C_EMAC_TSR (0xFFFBC014) // (EMAC) Transmit Status Register -#define AT91C_EMAC_DRFC (0xFFFBC080) // (EMAC) Discarded RX Frame Register -// ========== Register definition for EBI peripheral ========== -#define AT91C_EBI_CFGR (0xFFFFFF64) // (EBI) Configuration Register -#define AT91C_EBI_CSA (0xFFFFFF60) // (EBI) Chip Select Assignment Register -// ========== Register definition for SMC2 peripheral ========== -#define AT91C_SMC2_CSR (0xFFFFFF70) // (SMC2) SMC2 Chip Select Register -// ========== Register definition for SDRC peripheral ========== -#define AT91C_SDRC_IMR (0xFFFFFFAC) // (SDRC) SDRAM Controller Interrupt Mask Register -#define AT91C_SDRC_IER (0xFFFFFFA4) // (SDRC) SDRAM Controller Interrupt Enable Register -#define AT91C_SDRC_SRR (0xFFFFFF9C) // (SDRC) SDRAM Controller Self Refresh Register -#define AT91C_SDRC_TR (0xFFFFFF94) // (SDRC) SDRAM Controller Refresh Timer Register -#define AT91C_SDRC_ISR (0xFFFFFFB0) // (SDRC) SDRAM Controller Interrupt Mask Register -#define AT91C_SDRC_IDR (0xFFFFFFA8) // (SDRC) SDRAM Controller Interrupt Disable Register -#define AT91C_SDRC_LPR (0xFFFFFFA0) // (SDRC) SDRAM Controller Low Power Register -#define AT91C_SDRC_CR (0xFFFFFF98) // (SDRC) SDRAM Controller Configuration Register -#define AT91C_SDRC_MR (0xFFFFFF90) // (SDRC) SDRAM Controller Mode Register -// ========== Register definition for BFC peripheral ========== -#define AT91C_BFC_MR (0xFFFFFFC0) // (BFC) BFC Mode Register - -// ***************************************************************************** -// PIO DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_PIO_PA0 (1 << 0) // Pin Controlled by PA0 -#define AT91C_PA0_MISO (AT91C_PIO_PA0) // SPI Master In Slave -#define AT91C_PA0_PCK3 (AT91C_PIO_PA0) // PMC Programmable Clock Output 3 -#define AT91C_PIO_PA1 (1 << 1) // Pin Controlled by PA1 -#define AT91C_PA1_MOSI (AT91C_PIO_PA1) // SPI Master Out Slave -#define AT91C_PA1_PCK0 (AT91C_PIO_PA1) // PMC Programmable Clock Output 0 -#define AT91C_PIO_PA10 (1 << 10) // Pin Controlled by PA10 -#define AT91C_PA10_ETX1 (AT91C_PIO_PA10) // Ethernet MAC Transmit Data 1 -#define AT91C_PA10_MCDB1 (AT91C_PIO_PA10) // Multimedia Card B Data 1 -#define AT91C_PIO_PA11 (1 << 11) // Pin Controlled by PA11 -#define AT91C_PA11_ECRS_ECRSDV (AT91C_PIO_PA11) // Ethernet MAC Carrier Sense/Carrier Sense and Data Valid -#define AT91C_PA11_MCDB2 (AT91C_PIO_PA11) // Multimedia Card B Data 2 -#define AT91C_PIO_PA12 (1 << 12) // Pin Controlled by PA12 -#define AT91C_PA12_ERX0 (AT91C_PIO_PA12) // Ethernet MAC Receive Data 0 -#define AT91C_PA12_MCDB3 (AT91C_PIO_PA12) // Multimedia Card B Data 3 -#define AT91C_PIO_PA13 (1 << 13) // Pin Controlled by PA13 -#define AT91C_PA13_ERX1 (AT91C_PIO_PA13) // Ethernet MAC Receive Data 1 -#define AT91C_PA13_TCLK0 (AT91C_PIO_PA13) // Timer Counter 0 external clock input -#define AT91C_PIO_PA14 (1 << 14) // Pin Controlled by PA14 -#define AT91C_PA14_ERXER (AT91C_PIO_PA14) // Ethernet MAC Receive Error -#define AT91C_PA14_TCLK1 (AT91C_PIO_PA14) // Timer Counter 1 external clock input -#define AT91C_PIO_PA15 (1 << 15) // Pin Controlled by PA15 -#define AT91C_PA15_EMDC (AT91C_PIO_PA15) // Ethernet MAC Management Data Clock -#define AT91C_PA15_TCLK2 (AT91C_PIO_PA15) // Timer Counter 2 external clock input -#define AT91C_PIO_PA16 (1 << 16) // Pin Controlled by PA16 -#define AT91C_PA16_EMDIO (AT91C_PIO_PA16) // Ethernet MAC Management Data Input/Output -#define AT91C_PA16_IRQ6 (AT91C_PIO_PA16) // AIC Interrupt input 6 -#define AT91C_PIO_PA17 (1 << 17) // Pin Controlled by PA17 -#define AT91C_PA17_TXD0 (AT91C_PIO_PA17) // USART 0 Transmit Data -#define AT91C_PA17_TIOA0 (AT91C_PIO_PA17) // Timer Counter 0 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PA18 (1 << 18) // Pin Controlled by PA18 -#define AT91C_PA18_RXD0 (AT91C_PIO_PA18) // USART 0 Receive Data -#define AT91C_PA18_TIOB0 (AT91C_PIO_PA18) // Timer Counter 0 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PA19 (1 << 19) // Pin Controlled by PA19 -#define AT91C_PA19_SCK0 (AT91C_PIO_PA19) // USART 0 Serial Clock -#define AT91C_PA19_TIOA1 (AT91C_PIO_PA19) // Timer Counter 1 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PA2 (1 << 2) // Pin Controlled by PA2 -#define AT91C_PA2_SPCK (AT91C_PIO_PA2) // SPI Serial Clock -#define AT91C_PA2_IRQ4 (AT91C_PIO_PA2) // AIC Interrupt Input 4 -#define AT91C_PIO_PA20 (1 << 20) // Pin Controlled by PA20 -#define AT91C_PA20_CTS0 (AT91C_PIO_PA20) // USART 0 Clear To Send -#define AT91C_PA20_TIOB1 (AT91C_PIO_PA20) // Timer Counter 1 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PA21 (1 << 21) // Pin Controlled by PA21 -#define AT91C_PA21_RTS0 (AT91C_PIO_PA21) // Usart 0 Ready To Send -#define AT91C_PA21_TIOA2 (AT91C_PIO_PA21) // Timer Counter 2 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PA22 (1 << 22) // Pin Controlled by PA22 -#define AT91C_PA22_RXD2 (AT91C_PIO_PA22) // USART 2 Receive Data -#define AT91C_PA22_TIOB2 (AT91C_PIO_PA22) // Timer Counter 2 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PA23 (1 << 23) // Pin Controlled by PA23 -#define AT91C_PA23_TXD2 (AT91C_PIO_PA23) // USART 2 Transmit Data -#define AT91C_PA23_IRQ3 (AT91C_PIO_PA23) // Interrupt input 3 -#define AT91C_PIO_PA24 (1 << 24) // Pin Controlled by PA24 -#define AT91C_PA24_SCK2 (AT91C_PIO_PA24) // USART2 Serial Clock -#define AT91C_PA24_PCK1 (AT91C_PIO_PA24) // PMC Programmable Clock Output 1 -#define AT91C_PIO_PA25 (1 << 25) // Pin Controlled by PA25 -#define AT91C_PA25_TWD (AT91C_PIO_PA25) // TWI Two-wire Serial Data -#define AT91C_PA25_IRQ2 (AT91C_PIO_PA25) // Interrupt input 2 -#define AT91C_PIO_PA26 (1 << 26) // Pin Controlled by PA26 -#define AT91C_PA26_TWCK (AT91C_PIO_PA26) // TWI Two-wire Serial Clock -#define AT91C_PA26_IRQ1 (AT91C_PIO_PA26) // Interrupt input 1 -#define AT91C_PIO_PA27 (1 << 27) // Pin Controlled by PA27 -#define AT91C_PA27_MCCK (AT91C_PIO_PA27) // Multimedia Card Clock -#define AT91C_PA27_TCLK3 (AT91C_PIO_PA27) // Timer Counter 3 External Clock Input -#define AT91C_PIO_PA28 (1 << 28) // Pin Controlled by PA28 -#define AT91C_PA28_MCCDA (AT91C_PIO_PA28) // Multimedia Card A Command -#define AT91C_PA28_TCLK4 (AT91C_PIO_PA28) // Timer Counter 4 external Clock Input -#define AT91C_PIO_PA29 (1 << 29) // Pin Controlled by PA29 -#define AT91C_PA29_MCDA0 (AT91C_PIO_PA29) // Multimedia Card A Data 0 -#define AT91C_PA29_TCLK5 (AT91C_PIO_PA29) // Timer Counter 5 external clock input -#define AT91C_PIO_PA3 (1 << 3) // Pin Controlled by PA3 -#define AT91C_PA3_NPCS0 (AT91C_PIO_PA3) // SPI Peripheral Chip Select 0 -#define AT91C_PA3_IRQ5 (AT91C_PIO_PA3) // AIC Interrupt Input 5 -#define AT91C_PIO_PA30 (1 << 30) // Pin Controlled by PA30 -#define AT91C_PA30_DRXD (AT91C_PIO_PA30) // DBGU Debug Receive Data -#define AT91C_PA30_CTS2 (AT91C_PIO_PA30) // Usart 2 Clear To Send -#define AT91C_PIO_PA31 (1 << 31) // Pin Controlled by PA31 -#define AT91C_PA31_DTXD (AT91C_PIO_PA31) // DBGU Debug Transmit Data -#define AT91C_PA31_RTS2 (AT91C_PIO_PA31) // USART 2 Ready To Send -#define AT91C_PIO_PA4 (1 << 4) // Pin Controlled by PA4 -#define AT91C_PA4_NPCS1 (AT91C_PIO_PA4) // SPI Peripheral Chip Select 1 -#define AT91C_PA4_PCK1 (AT91C_PIO_PA4) // PMC Programmable Clock Output 1 -#define AT91C_PIO_PA5 (1 << 5) // Pin Controlled by PA5 -#define AT91C_PA5_NPCS2 (AT91C_PIO_PA5) // SPI Peripheral Chip Select 2 -#define AT91C_PA5_TXD3 (AT91C_PIO_PA5) // USART 3 Transmit Data -#define AT91C_PIO_PA6 (1 << 6) // Pin Controlled by PA6 -#define AT91C_PA6_NPCS3 (AT91C_PIO_PA6) // SPI Peripheral Chip Select 3 -#define AT91C_PA6_RXD3 (AT91C_PIO_PA6) // USART 3 Receive Data -#define AT91C_PIO_PA7 (1 << 7) // Pin Controlled by PA7 -#define AT91C_PA7_ETXCK_EREFCK (AT91C_PIO_PA7) // Ethernet MAC Transmit Clock/Reference Clock -#define AT91C_PA7_PCK2 (AT91C_PIO_PA7) // PMC Programmable Clock 2 -#define AT91C_PIO_PA8 (1 << 8) // Pin Controlled by PA8 -#define AT91C_PA8_ETXEN (AT91C_PIO_PA8) // Ethernet MAC Transmit Enable -#define AT91C_PA8_MCCDB (AT91C_PIO_PA8) // Multimedia Card B Command -#define AT91C_PIO_PA9 (1 << 9) // Pin Controlled by PA9 -#define AT91C_PA9_ETX0 (AT91C_PIO_PA9) // Ethernet MAC Transmit Data 0 -#define AT91C_PA9_MCDB0 (AT91C_PIO_PA9) // Multimedia Card B Data 0 -#define AT91C_PIO_PB0 (1 << 0) // Pin Controlled by PB0 -#define AT91C_PB0_TF0 (AT91C_PIO_PB0) // SSC Transmit Frame Sync 0 -#define AT91C_PB0_TIOB3 (AT91C_PIO_PB0) // Timer Counter 3 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PB1 (1 << 1) // Pin Controlled by PB1 -#define AT91C_PB1_TK0 (AT91C_PIO_PB1) // SSC Transmit Clock 0 -#define AT91C_PB1_CTS3 (AT91C_PIO_PB1) // USART 3 Clear To Send -#define AT91C_PIO_PB10 (1 << 10) // Pin Controlled by PB10 -#define AT91C_PB10_RK1 (AT91C_PIO_PB10) // SSC Receive Clock 1 -#define AT91C_PB10_TIOA5 (AT91C_PIO_PB10) // Timer Counter 5 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PB11 (1 << 11) // Pin Controlled by PB11 -#define AT91C_PB11_RF1 (AT91C_PIO_PB11) // SSC Receive Frame Sync 1 -#define AT91C_PB11_TIOB5 (AT91C_PIO_PB11) // Timer Counter 5 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PB12 (1 << 12) // Pin Controlled by PB12 -#define AT91C_PB12_TF2 (AT91C_PIO_PB12) // SSC Transmit Frame Sync 2 -#define AT91C_PB12_ETX2 (AT91C_PIO_PB12) // Ethernet MAC Transmit Data 2 -#define AT91C_PIO_PB13 (1 << 13) // Pin Controlled by PB13 -#define AT91C_PB13_TK2 (AT91C_PIO_PB13) // SSC Transmit Clock 2 -#define AT91C_PB13_ETX3 (AT91C_PIO_PB13) // Ethernet MAC Transmit Data 3 -#define AT91C_PIO_PB14 (1 << 14) // Pin Controlled by PB14 -#define AT91C_PB14_TD2 (AT91C_PIO_PB14) // SSC Transmit Data 2 -#define AT91C_PB14_ETXER (AT91C_PIO_PB14) // Ethernet MAC Transmikt Coding Error -#define AT91C_PIO_PB15 (1 << 15) // Pin Controlled by PB15 -#define AT91C_PB15_RD2 (AT91C_PIO_PB15) // SSC Receive Data 2 -#define AT91C_PB15_ERX2 (AT91C_PIO_PB15) // Ethernet MAC Receive Data 2 -#define AT91C_PIO_PB16 (1 << 16) // Pin Controlled by PB16 -#define AT91C_PB16_RK2 (AT91C_PIO_PB16) // SSC Receive Clock 2 -#define AT91C_PB16_ERX3 (AT91C_PIO_PB16) // Ethernet MAC Receive Data 3 -#define AT91C_PIO_PB17 (1 << 17) // Pin Controlled by PB17 -#define AT91C_PB17_RF2 (AT91C_PIO_PB17) // SSC Receive Frame Sync 2 -#define AT91C_PB17_ERXDV (AT91C_PIO_PB17) // Ethernet MAC Receive Data Valid -#define AT91C_PIO_PB18 (1 << 18) // Pin Controlled by PB18 -#define AT91C_PB18_RI1 (AT91C_PIO_PB18) // USART 1 Ring Indicator -#define AT91C_PB18_ECOL (AT91C_PIO_PB18) // Ethernet MAC Collision Detected -#define AT91C_PIO_PB19 (1 << 19) // Pin Controlled by PB19 -#define AT91C_PB19_DTR1 (AT91C_PIO_PB19) // USART 1 Data Terminal ready -#define AT91C_PB19_ERXCK (AT91C_PIO_PB19) // Ethernet MAC Receive Clock -#define AT91C_PIO_PB2 (1 << 2) // Pin Controlled by PB2 -#define AT91C_PB2_TD0 (AT91C_PIO_PB2) // SSC Transmit data -#define AT91C_PB2_SCK3 (AT91C_PIO_PB2) // USART 3 Serial Clock -#define AT91C_PIO_PB20 (1 << 20) // Pin Controlled by PB20 -#define AT91C_PB20_TXD1 (AT91C_PIO_PB20) // USART 1 Transmit Data -#define AT91C_PIO_PB21 (1 << 21) // Pin Controlled by PB21 -#define AT91C_PB21_RXD1 (AT91C_PIO_PB21) // USART 1 Receive Data -#define AT91C_PIO_PB22 (1 << 22) // Pin Controlled by PB22 -#define AT91C_PB22_SCK1 (AT91C_PIO_PB22) // USART1 Serial Clock -#define AT91C_PIO_PB23 (1 << 23) // Pin Controlled by PB23 -#define AT91C_PB23_DCD1 (AT91C_PIO_PB23) // USART 1 Data Carrier Detect -#define AT91C_PIO_PB24 (1 << 24) // Pin Controlled by PB24 -#define AT91C_PB24_CTS1 (AT91C_PIO_PB24) // USART 1 Clear To Send -#define AT91C_PIO_PB25 (1 << 25) // Pin Controlled by PB25 -#define AT91C_PB25_DSR1 (AT91C_PIO_PB25) // USART 1 Data Set ready -#define AT91C_PB25_EF100 (AT91C_PIO_PB25) // Ethernet MAC Force 100 Mbits/sec -#define AT91C_PIO_PB26 (1 << 26) // Pin Controlled by PB26 -#define AT91C_PB26_RTS1 (AT91C_PIO_PB26) // Usart 0 Ready To Send -#define AT91C_PIO_PB27 (1 << 27) // Pin Controlled by PB27 -#define AT91C_PB27_PCK0 (AT91C_PIO_PB27) // PMC Programmable Clock Output 0 -#define AT91C_PIO_PB28 (1 << 28) // Pin Controlled by PB28 -#define AT91C_PB28_FIQ (AT91C_PIO_PB28) // AIC Fast Interrupt Input -#define AT91C_PIO_PB29 (1 << 29) // Pin Controlled by PB29 -#define AT91C_PB29_IRQ0 (AT91C_PIO_PB29) // Interrupt input 0 -#define AT91C_PIO_PB3 (1 << 3) // Pin Controlled by PB3 -#define AT91C_PB3_RD0 (AT91C_PIO_PB3) // SSC Receive Data -#define AT91C_PB3_MCDA1 (AT91C_PIO_PB3) // Multimedia Card A Data 1 -#define AT91C_PIO_PB4 (1 << 4) // Pin Controlled by PB4 -#define AT91C_PB4_RK0 (AT91C_PIO_PB4) // SSC Receive Clock -#define AT91C_PB4_MCDA2 (AT91C_PIO_PB4) // Multimedia Card A Data 2 -#define AT91C_PIO_PB5 (1 << 5) // Pin Controlled by PB5 -#define AT91C_PB5_RF0 (AT91C_PIO_PB5) // SSC Receive Frame Sync 0 -#define AT91C_PB5_MCDA3 (AT91C_PIO_PB5) // Multimedia Card A Data 3 -#define AT91C_PIO_PB6 (1 << 6) // Pin Controlled by PB6 -#define AT91C_PB6_TF1 (AT91C_PIO_PB6) // SSC Transmit Frame Sync 1 -#define AT91C_PB6_TIOA3 (AT91C_PIO_PB6) // Timer Counter 4 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PB7 (1 << 7) // Pin Controlled by PB7 -#define AT91C_PB7_TK1 (AT91C_PIO_PB7) // SSC Transmit Clock 1 -#define AT91C_PB7_TIOB3 (AT91C_PIO_PB7) // Timer Counter 3 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PB8 (1 << 8) // Pin Controlled by PB8 -#define AT91C_PB8_TD1 (AT91C_PIO_PB8) // SSC Transmit Data 1 -#define AT91C_PB8_TIOA4 (AT91C_PIO_PB8) // Timer Counter 4 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PB9 (1 << 9) // Pin Controlled by PB9 -#define AT91C_PB9_RD1 (AT91C_PIO_PB9) // SSC Receive Data 1 -#define AT91C_PB9_TIOB4 (AT91C_PIO_PB9) // Timer Counter 4 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PC0 (1 << 0) // Pin Controlled by PC0 -#define AT91C_PC0_BFCK (AT91C_PIO_PC0) // Burst Flash Clock -#define AT91C_PIO_PC1 (1 << 1) // Pin Controlled by PC1 -#define AT91C_PC1_BFRDY_SMOE (AT91C_PIO_PC1) // Burst Flash Ready -#define AT91C_PIO_PC10 (1 << 10) // Pin Controlled by PC10 -#define AT91C_PC10_NCS4_CFCS (AT91C_PIO_PC10) // Compact Flash Chip Select -#define AT91C_PIO_PC11 (1 << 11) // Pin Controlled by PC11 -#define AT91C_PC11_NCS5_CFCE1 (AT91C_PIO_PC11) // Chip Select 5 / Compact Flash Chip Enable 1 -#define AT91C_PIO_PC12 (1 << 12) // Pin Controlled by PC12 -#define AT91C_PC12_NCS6_CFCE2 (AT91C_PIO_PC12) // Chip Select 6 / Compact Flash Chip Enable 2 -#define AT91C_PIO_PC13 (1 << 13) // Pin Controlled by PC13 -#define AT91C_PC13_NCS7 (AT91C_PIO_PC13) // Chip Select 7 -#define AT91C_PIO_PC14 (1 << 14) // Pin Controlled by PC14 -#define AT91C_PIO_PC15 (1 << 15) // Pin Controlled by PC15 -#define AT91C_PIO_PC16 (1 << 16) // Pin Controlled by PC16 -#define AT91C_PC16_D16 (AT91C_PIO_PC16) // Data Bus [16] -#define AT91C_PIO_PC17 (1 << 17) // Pin Controlled by PC17 -#define AT91C_PC17_D17 (AT91C_PIO_PC17) // Data Bus [17] -#define AT91C_PIO_PC18 (1 << 18) // Pin Controlled by PC18 -#define AT91C_PC18_D18 (AT91C_PIO_PC18) // Data Bus [18] -#define AT91C_PIO_PC19 (1 << 19) // Pin Controlled by PC19 -#define AT91C_PC19_D19 (AT91C_PIO_PC19) // Data Bus [19] -#define AT91C_PIO_PC2 (1 << 2) // Pin Controlled by PC2 -#define AT91C_PC2_BFAVD (AT91C_PIO_PC2) // Burst Flash Address Valid -#define AT91C_PIO_PC20 (1 << 20) // Pin Controlled by PC20 -#define AT91C_PC20_D20 (AT91C_PIO_PC20) // Data Bus [20] -#define AT91C_PIO_PC21 (1 << 21) // Pin Controlled by PC21 -#define AT91C_PC21_D21 (AT91C_PIO_PC21) // Data Bus [21] -#define AT91C_PIO_PC22 (1 << 22) // Pin Controlled by PC22 -#define AT91C_PC22_D22 (AT91C_PIO_PC22) // Data Bus [22] -#define AT91C_PIO_PC23 (1 << 23) // Pin Controlled by PC23 -#define AT91C_PC23_D23 (AT91C_PIO_PC23) // Data Bus [23] -#define AT91C_PIO_PC24 (1 << 24) // Pin Controlled by PC24 -#define AT91C_PC24_D24 (AT91C_PIO_PC24) // Data Bus [24] -#define AT91C_PIO_PC25 (1 << 25) // Pin Controlled by PC25 -#define AT91C_PC25_D25 (AT91C_PIO_PC25) // Data Bus [25] -#define AT91C_PIO_PC26 (1 << 26) // Pin Controlled by PC26 -#define AT91C_PC26_D26 (AT91C_PIO_PC26) // Data Bus [26] -#define AT91C_PIO_PC27 (1 << 27) // Pin Controlled by PC27 -#define AT91C_PC27_D27 (AT91C_PIO_PC27) // Data Bus [27] -#define AT91C_PIO_PC28 (1 << 28) // Pin Controlled by PC28 -#define AT91C_PC28_D28 (AT91C_PIO_PC28) // Data Bus [28] -#define AT91C_PIO_PC29 (1 << 29) // Pin Controlled by PC29 -#define AT91C_PC29_D29 (AT91C_PIO_PC29) // Data Bus [29] -#define AT91C_PIO_PC3 (1 << 3) // Pin Controlled by PC3 -#define AT91C_PC3_BFBAA_SMWE (AT91C_PIO_PC3) // Burst Flash Address Advance / SmartMedia Write Enable -#define AT91C_PIO_PC30 (1 << 30) // Pin Controlled by PC30 -#define AT91C_PC30_D30 (AT91C_PIO_PC30) // Data Bus [30] -#define AT91C_PIO_PC31 (1 << 31) // Pin Controlled by PC31 -#define AT91C_PC31_D31 (AT91C_PIO_PC31) // Data Bus [31] -#define AT91C_PIO_PC4 (1 << 4) // Pin Controlled by PC4 -#define AT91C_PC4_BFOE (AT91C_PIO_PC4) // Burst Flash Output Enable -#define AT91C_PIO_PC5 (1 << 5) // Pin Controlled by PC5 -#define AT91C_PC5_BFWE (AT91C_PIO_PC5) // Burst Flash Write Enable -#define AT91C_PIO_PC6 (1 << 6) // Pin Controlled by PC6 -#define AT91C_PC6_NWAIT (AT91C_PIO_PC6) // NWAIT -#define AT91C_PIO_PC7 (1 << 7) // Pin Controlled by PC7 -#define AT91C_PC7_A23 (AT91C_PIO_PC7) // Address Bus[23] -#define AT91C_PIO_PC8 (1 << 8) // Pin Controlled by PC8 -#define AT91C_PC8_A24 (AT91C_PIO_PC8) // Address Bus[24] -#define AT91C_PIO_PC9 (1 << 9) // Pin Controlled by PC9 -#define AT91C_PC9_A25_CFRNW (AT91C_PIO_PC9) // Address Bus[25] / Compact Flash Read Not Write -#define AT91C_PIO_PD0 (1 << 0) // Pin Controlled by PD0 -#define AT91C_PD0_ETX0 (AT91C_PIO_PD0) // Ethernet MAC Transmit Data 0 -#define AT91C_PIO_PD1 (1 << 1) // Pin Controlled by PD1 -#define AT91C_PD1_ETX1 (AT91C_PIO_PD1) // Ethernet MAC Transmit Data 1 -#define AT91C_PIO_PD10 (1 << 10) // Pin Controlled by PD10 -#define AT91C_PD10_PCK3 (AT91C_PIO_PD10) // PMC Programmable Clock Output 3 -#define AT91C_PD10_TPS1 (AT91C_PIO_PD10) // ETM ARM9 pipeline status 1 -#define AT91C_PIO_PD11 (1 << 11) // Pin Controlled by PD11 -#define AT91C_PD11_ (AT91C_PIO_PD11) // -#define AT91C_PD11_TPS2 (AT91C_PIO_PD11) // ETM ARM9 pipeline status 2 -#define AT91C_PIO_PD12 (1 << 12) // Pin Controlled by PD12 -#define AT91C_PD12_ (AT91C_PIO_PD12) // -#define AT91C_PD12_TPK0 (AT91C_PIO_PD12) // ETM Trace Packet 0 -#define AT91C_PIO_PD13 (1 << 13) // Pin Controlled by PD13 -#define AT91C_PD13_ (AT91C_PIO_PD13) // -#define AT91C_PD13_TPK1 (AT91C_PIO_PD13) // ETM Trace Packet 1 -#define AT91C_PIO_PD14 (1 << 14) // Pin Controlled by PD14 -#define AT91C_PD14_ (AT91C_PIO_PD14) // -#define AT91C_PD14_TPK2 (AT91C_PIO_PD14) // ETM Trace Packet 2 -#define AT91C_PIO_PD15 (1 << 15) // Pin Controlled by PD15 -#define AT91C_PD15_TD0 (AT91C_PIO_PD15) // SSC Transmit data -#define AT91C_PD15_TPK3 (AT91C_PIO_PD15) // ETM Trace Packet 3 -#define AT91C_PIO_PD16 (1 << 16) // Pin Controlled by PD16 -#define AT91C_PD16_TD1 (AT91C_PIO_PD16) // SSC Transmit Data 1 -#define AT91C_PD16_TPK4 (AT91C_PIO_PD16) // ETM Trace Packet 4 -#define AT91C_PIO_PD17 (1 << 17) // Pin Controlled by PD17 -#define AT91C_PD17_TD2 (AT91C_PIO_PD17) // SSC Transmit Data 2 -#define AT91C_PD17_TPK5 (AT91C_PIO_PD17) // ETM Trace Packet 5 -#define AT91C_PIO_PD18 (1 << 18) // Pin Controlled by PD18 -#define AT91C_PD18_NPCS1 (AT91C_PIO_PD18) // SPI Peripheral Chip Select 1 -#define AT91C_PD18_TPK6 (AT91C_PIO_PD18) // ETM Trace Packet 6 -#define AT91C_PIO_PD19 (1 << 19) // Pin Controlled by PD19 -#define AT91C_PD19_NPCS2 (AT91C_PIO_PD19) // SPI Peripheral Chip Select 2 -#define AT91C_PD19_TPK7 (AT91C_PIO_PD19) // ETM Trace Packet 7 -#define AT91C_PIO_PD2 (1 << 2) // Pin Controlled by PD2 -#define AT91C_PD2_ETX2 (AT91C_PIO_PD2) // Ethernet MAC Transmit Data 2 -#define AT91C_PIO_PD20 (1 << 20) // Pin Controlled by PD20 -#define AT91C_PD20_NPCS3 (AT91C_PIO_PD20) // SPI Peripheral Chip Select 3 -#define AT91C_PD20_TPK8 (AT91C_PIO_PD20) // ETM Trace Packet 8 -#define AT91C_PIO_PD21 (1 << 21) // Pin Controlled by PD21 -#define AT91C_PD21_RTS0 (AT91C_PIO_PD21) // Usart 0 Ready To Send -#define AT91C_PD21_TPK9 (AT91C_PIO_PD21) // ETM Trace Packet 9 -#define AT91C_PIO_PD22 (1 << 22) // Pin Controlled by PD22 -#define AT91C_PD22_RTS1 (AT91C_PIO_PD22) // Usart 0 Ready To Send -#define AT91C_PD22_TPK10 (AT91C_PIO_PD22) // ETM Trace Packet 10 -#define AT91C_PIO_PD23 (1 << 23) // Pin Controlled by PD23 -#define AT91C_PD23_RTS2 (AT91C_PIO_PD23) // USART 2 Ready To Send -#define AT91C_PD23_TPK11 (AT91C_PIO_PD23) // ETM Trace Packet 11 -#define AT91C_PIO_PD24 (1 << 24) // Pin Controlled by PD24 -#define AT91C_PD24_RTS3 (AT91C_PIO_PD24) // USART 3 Ready To Send -#define AT91C_PD24_TPK12 (AT91C_PIO_PD24) // ETM Trace Packet 12 -#define AT91C_PIO_PD25 (1 << 25) // Pin Controlled by PD25 -#define AT91C_PD25_DTR1 (AT91C_PIO_PD25) // USART 1 Data Terminal ready -#define AT91C_PD25_TPK13 (AT91C_PIO_PD25) // ETM Trace Packet 13 -#define AT91C_PIO_PD26 (1 << 26) // Pin Controlled by PD26 -#define AT91C_PD26_TPK14 (AT91C_PIO_PD26) // ETM Trace Packet 14 -#define AT91C_PIO_PD27 (1 << 27) // Pin Controlled by PD27 -#define AT91C_PD27_TPK15 (AT91C_PIO_PD27) // ETM Trace Packet 15 -#define AT91C_PIO_PD3 (1 << 3) // Pin Controlled by PD3 -#define AT91C_PD3_ETX3 (AT91C_PIO_PD3) // Ethernet MAC Transmit Data 3 -#define AT91C_PIO_PD4 (1 << 4) // Pin Controlled by PD4 -#define AT91C_PD4_ETXEN (AT91C_PIO_PD4) // Ethernet MAC Transmit Enable -#define AT91C_PIO_PD5 (1 << 5) // Pin Controlled by PD5 -#define AT91C_PD5_ETXER (AT91C_PIO_PD5) // Ethernet MAC Transmikt Coding Error -#define AT91C_PIO_PD6 (1 << 6) // Pin Controlled by PD6 -#define AT91C_PD6_DTXD (AT91C_PIO_PD6) // DBGU Debug Transmit Data -#define AT91C_PIO_PD7 (1 << 7) // Pin Controlled by PD7 -#define AT91C_PD7_PCK0 (AT91C_PIO_PD7) // PMC Programmable Clock Output 0 -#define AT91C_PD7_TSYNC (AT91C_PIO_PD7) // ETM Synchronization signal -#define AT91C_PIO_PD8 (1 << 8) // Pin Controlled by PD8 -#define AT91C_PD8_PCK1 (AT91C_PIO_PD8) // PMC Programmable Clock Output 1 -#define AT91C_PD8_TCLK (AT91C_PIO_PD8) // ETM Trace Clock signal -#define AT91C_PIO_PD9 (1 << 9) // Pin Controlled by PD9 -#define AT91C_PD9_PCK2 (AT91C_PIO_PD9) // PMC Programmable Clock 2 -#define AT91C_PD9_TPS0 (AT91C_PIO_PD9) // ETM ARM9 pipeline status 0 - -// ***************************************************************************** -// PERIPHERAL ID DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_ID_FIQ ( 0) // Advanced Interrupt Controller (FIQ) -#define AT91C_ID_SYS ( 1) // System Peripheral -#define AT91C_ID_PIOA ( 2) // Parallel IO Controller A -#define AT91C_ID_PIOB ( 3) // Parallel IO Controller B -#define AT91C_ID_PIOC ( 4) // Parallel IO Controller C -#define AT91C_ID_PIOD ( 5) // Parallel IO Controller D -#define AT91C_ID_US0 ( 6) // USART 0 -#define AT91C_ID_US1 ( 7) // USART 1 -#define AT91C_ID_US2 ( 8) // USART 2 -#define AT91C_ID_US3 ( 9) // USART 3 -#define AT91C_ID_MCI (10) // Multimedia Card Interface -#define AT91C_ID_UDP (11) // USB Device Port -#define AT91C_ID_TWI (12) // Two-Wire Interface -#define AT91C_ID_SPI (13) // Serial Peripheral Interface -#define AT91C_ID_SSC0 (14) // Serial Synchronous Controller 0 -#define AT91C_ID_SSC1 (15) // Serial Synchronous Controller 1 -#define AT91C_ID_SSC2 (16) // Serial Synchronous Controller 2 -#define AT91C_ID_TC0 (17) // Timer Counter 0 -#define AT91C_ID_TC1 (18) // Timer Counter 1 -#define AT91C_ID_TC2 (19) // Timer Counter 2 -#define AT91C_ID_TC3 (20) // Timer Counter 3 -#define AT91C_ID_TC4 (21) // Timer Counter 4 -#define AT91C_ID_TC5 (22) // Timer Counter 5 -#define AT91C_ID_UHP (23) // USB Host port -#define AT91C_ID_EMAC (24) // Ethernet MAC -#define AT91C_ID_IRQ0 (25) // Advanced Interrupt Controller (IRQ0) -#define AT91C_ID_IRQ1 (26) // Advanced Interrupt Controller (IRQ1) -#define AT91C_ID_IRQ2 (27) // Advanced Interrupt Controller (IRQ2) -#define AT91C_ID_IRQ3 (28) // Advanced Interrupt Controller (IRQ3) -#define AT91C_ID_IRQ4 (29) // Advanced Interrupt Controller (IRQ4) -#define AT91C_ID_IRQ5 (30) // Advanced Interrupt Controller (IRQ5) -#define AT91C_ID_IRQ6 (31) // Advanced Interrupt Controller (IRQ6) - -// ***************************************************************************** -// BASE ADDRESS DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_BASE_SYS (0xFFFFF000) // (SYS) Base Address -#define AT91C_BASE_MC (0xFFFFFF00) // (MC) Base Address -#define AT91C_BASE_RTC (0xFFFFFE00) // (RTC) Base Address -#define AT91C_BASE_ST (0xFFFFFD00) // (ST) Base Address -#define AT91C_BASE_PMC (0xFFFFFC00) // (PMC) Base Address -#define AT91C_BASE_CKGR (0xFFFFFC20) // (CKGR) Base Address -#define AT91C_BASE_PIOD (0xFFFFFA00) // (PIOD) Base Address -#define AT91C_BASE_PIOC (0xFFFFF800) // (PIOC) Base Address -#define AT91C_BASE_PIOB (0xFFFFF600) // (PIOB) Base Address -#define AT91C_BASE_PIOA (0xFFFFF400) // (PIOA) Base Address -#define AT91C_BASE_DBGU (0xFFFFF200) // (DBGU) Base Address -#define AT91C_BASE_PDC_DBGU (0xFFFFF300) // (PDC_DBGU) Base Address -#define AT91C_BASE_AIC (0xFFFFF000) // (AIC) Base Address -#define AT91C_BASE_PDC_SPI (0xFFFE0100) // (PDC_SPI) Base Address -#define AT91C_BASE_SPI (0xFFFE0000) // (SPI) Base Address -#define AT91C_BASE_PDC_SSC2 (0xFFFD8100) // (PDC_SSC2) Base Address -#define AT91C_BASE_SSC2 (0xFFFD8000) // (SSC2) Base Address -#define AT91C_BASE_PDC_SSC1 (0xFFFD4100) // (PDC_SSC1) Base Address -#define AT91C_BASE_SSC1 (0xFFFD4000) // (SSC1) Base Address -#define AT91C_BASE_PDC_SSC0 (0xFFFD0100) // (PDC_SSC0) Base Address -#define AT91C_BASE_SSC0 (0xFFFD0000) // (SSC0) Base Address -#define AT91C_BASE_PDC_US3 (0xFFFCC100) // (PDC_US3) Base Address -#define AT91C_BASE_US3 (0xFFFCC000) // (US3) Base Address -#define AT91C_BASE_PDC_US2 (0xFFFC8100) // (PDC_US2) Base Address -#define AT91C_BASE_US2 (0xFFFC8000) // (US2) Base Address -#define AT91C_BASE_PDC_US1 (0xFFFC4100) // (PDC_US1) Base Address -#define AT91C_BASE_US1 (0xFFFC4000) // (US1) Base Address -#define AT91C_BASE_PDC_US0 (0xFFFC0100) // (PDC_US0) Base Address -#define AT91C_BASE_US0 (0xFFFC0000) // (US0) Base Address -#define AT91C_BASE_TWI (0xFFFB8000) // (TWI) Base Address -#define AT91C_BASE_PDC_MCI (0xFFFB4100) // (PDC_MCI) Base Address -#define AT91C_BASE_MCI (0xFFFB4000) // (MCI) Base Address -#define AT91C_BASE_UDP (0xFFFB0000) // (UDP) Base Address -#define AT91C_BASE_TC5 (0xFFFA4080) // (TC5) Base Address -#define AT91C_BASE_TC4 (0xFFFA4040) // (TC4) Base Address -#define AT91C_BASE_TC3 (0xFFFA4000) // (TC3) Base Address -#define AT91C_BASE_TCB1 (0xFFFA4080) // (TCB1) Base Address -#define AT91C_BASE_TC2 (0xFFFA0080) // (TC2) Base Address -#define AT91C_BASE_TC1 (0xFFFA0040) // (TC1) Base Address -#define AT91C_BASE_TC0 (0xFFFA0000) // (TC0) Base Address -#define AT91C_BASE_TCB0 (0xFFFA0000) // (TCB0) Base Address -#define AT91C_BASE_UHP (0x00300000) // (UHP) Base Address -#define AT91C_BASE_EMAC (0xFFFBC000) // (EMAC) Base Address -#define AT91C_BASE_EBI (0xFFFFFF60) // (EBI) Base Address -#define AT91C_BASE_SMC2 (0xFFFFFF70) // (SMC2) Base Address -#define AT91C_BASE_SDRC (0xFFFFFF90) // (SDRC) Base Address -#define AT91C_BASE_BFC (0xFFFFFFC0) // (BFC) Base Address - -// ***************************************************************************** -// MEMORY MAPPING DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_ISRAM (0x00200000) // Internal SRAM base address -#define AT91C_ISRAM_SIZE (0x00004000) // Internal SRAM size in byte (16 Kbyte) -#define AT91C_IROM (0x00100000) // Internal ROM base address -#define AT91C_IROM_SIZE (0x00020000) // Internal ROM size in byte (128 Kbyte) - - diff --git a/target/linux/at91/image/dfboot/src/include/led.h b/target/linux/at91/image/dfboot/src/include/led.h deleted file mode 100644 index 9bebd9c..0000000 --- a/target/linux/at91/image/dfboot/src/include/led.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * (C) Copyright 2006 - * Atmel Nordic AB <www.atmel.com> - * Ulf Samuelsson <ulf@atmel.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - #ifndef __LED_H -#define __LED_H - -#ifndef __ASSEMBLY__ -extern void LED_init (void); -extern void LED_set(unsigned int led); -extern void red_LED_on(void); -extern void red_LED_off(void); -extern void green_LED_on(void); -extern void green_LED_off(void); -extern void yellow_LED_on(void); -extern void yellow_LED_off(void); -extern void LED_blink(unsigned int led); -#else - .extern LED_init - .extern LED_set - .extern LED_blink - .extern red_LED_on - .extern red_LED_off - .extern yellow_LED_on - .extern yellow_LED_off - .extern green_LED_on - .extern green_LED_off -#endif -#endif diff --git a/target/linux/at91/image/dfboot/src/include/lib_AT91RM9200.h b/target/linux/at91/image/dfboot/src/include/lib_AT91RM9200.h deleted file mode 100644 index c322b32..0000000 --- a/target/linux/at91/image/dfboot/src/include/lib_AT91RM9200.h +++ /dev/null @@ -1,2978 +0,0 @@ -//*---------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//*---------------------------------------------------------------------------- -//* The software is delivered "AS IS" without warranty or condition of any -//* kind, either express, implied or statutory. This includes without -//* limitation any warranty or condition with respect to merchantability or -//* fitness for any particular purpose, or against the infringements of -//* intellectual property rights of others. -//*---------------------------------------------------------------------------- -//* File Name : lib_AT91RM9200.h -//* Object : AT91RM9200 inlined functions -//* Generated : AT91 SW Application Group 11/19/2003 (17:20:51) -//* -//* CVS Reference : /lib_pdc.h/1.2/Tue Jul 02 12:29:40 2002// -//* CVS Reference : /lib_dbgu.h/1.1/Fri Jan 31 12:18:40 2003// -//* CVS Reference : /lib_rtc_1245d.h/1.1/Fri Jan 31 12:19:12 2003// -//* CVS Reference : /lib_ssc.h/1.4/Fri Jan 31 12:19:20 2003// -//* CVS Reference : /lib_spi_AT91RMxxxx.h/1.2/Fri Jan 31 12:19:31 2003// -//* CVS Reference : /lib_tc_1753b.h/1.1/Fri Jan 31 12:20:02 2003// -//* CVS Reference : /lib_pmc.h/1.3/Thu Nov 14 07:40:45 2002// -//* CVS Reference : /lib_pio.h/1.3/Fri Jan 31 12:18:56 2003// -//* CVS Reference : /lib_twi.h/1.2/Fri Jan 31 12:19:38 2003// -//* CVS Reference : /lib_usart.h/1.5/Thu Nov 21 16:01:53 2002// -//* CVS Reference : /lib_mci.h/1.2/Wed Nov 20 14:18:55 2002// -//* CVS Reference : /lib_aic.h/1.3/Fri Jul 12 07:46:11 2002// -//* CVS Reference : /lib_udp.h/1.3/Fri Jan 31 12:19:48 2003// -//* CVS Reference : /lib_st.h/1.4/Fri Jan 31 12:20:13 2003// -//*---------------------------------------------------------------------------- - -#ifndef lib_AT91RM9200_H -#define lib_AT91RM9200_H - -/* ***************************************************************************** - SOFTWARE API FOR PDC - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_SetNextRx -//* \brief Set the next receive transfer descriptor -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_SetNextRx ( - AT91PS_PDC pPDC, // \arg pointer to a PDC controller - char *address, // \arg address to the next bloc to be received - unsigned int bytes) // \arg number of bytes to be received -{ - pPDC->PDC_RNPR = (unsigned int) address; - pPDC->PDC_RNCR = bytes; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_SetNextTx -//* \brief Set the next transmit transfer descriptor -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_SetNextTx ( - AT91PS_PDC pPDC, // \arg pointer to a PDC controller - char *address, // \arg address to the next bloc to be transmitted - unsigned int bytes) // \arg number of bytes to be transmitted -{ - pPDC->PDC_TNPR = (unsigned int) address; - pPDC->PDC_TNCR = bytes; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_SetRx -//* \brief Set the receive transfer descriptor -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_SetRx ( - AT91PS_PDC pPDC, // \arg pointer to a PDC controller - char *address, // \arg address to the next bloc to be received - unsigned int bytes) // \arg number of bytes to be received -{ - pPDC->PDC_RPR = (unsigned int) address; - pPDC->PDC_RCR = bytes; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_SetTx -//* \brief Set the transmit transfer descriptor -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_SetTx ( - AT91PS_PDC pPDC, // \arg pointer to a PDC controller - char *address, // \arg address to the next bloc to be transmitted - unsigned int bytes) // \arg number of bytes to be transmitted -{ - pPDC->PDC_TPR = (unsigned int) address; - pPDC->PDC_TCR = bytes; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_EnableTx -//* \brief Enable transmit -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_EnableTx ( - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - pPDC->PDC_PTCR = AT91C_PDC_TXTEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_EnableRx -//* \brief Enable receive -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_EnableRx ( - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - pPDC->PDC_PTCR = AT91C_PDC_RXTEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_DisableTx -//* \brief Disable transmit -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_DisableTx ( - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - pPDC->PDC_PTCR = AT91C_PDC_TXTDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_DisableRx -//* \brief Disable receive -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_DisableRx ( - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - pPDC->PDC_PTCR = AT91C_PDC_RXTDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_IsTxEmpty -//* \brief Test if the current transfer descriptor has been sent -//*---------------------------------------------------------------------------- -static inline int AT91F_PDC_IsTxEmpty ( // \return return 1 if transfer is complete - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - return !(pPDC->PDC_TCR); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_IsNextTxEmpty -//* \brief Test if the next transfer descriptor has been moved to the current td -//*---------------------------------------------------------------------------- -static inline int AT91F_PDC_IsNextTxEmpty ( // \return return 1 if transfer is complete - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - return !(pPDC->PDC_TNCR); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_IsRxEmpty -//* \brief Test if the current transfer descriptor has been filled -//*---------------------------------------------------------------------------- -static inline int AT91F_PDC_IsRxEmpty ( // \return return 1 if transfer is complete - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - return !(pPDC->PDC_RCR); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_IsNextRxEmpty -//* \brief Test if the next transfer descriptor has been moved to the current td -//*---------------------------------------------------------------------------- -static inline int AT91F_PDC_IsNextRxEmpty ( // \return return 1 if transfer is complete - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - return !(pPDC->PDC_RNCR); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_Open -//* \brief Open PDC: disable TX and RX reset transfer descriptors, re-enable RX and TX -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_Open ( - AT91PS_PDC pPDC) // \arg pointer to a PDC controller -{ - //* Disable the RX and TX PDC transfer requests - AT91F_PDC_DisableRx(pPDC); - AT91F_PDC_DisableTx(pPDC); - - //* Reset all Counter register Next buffer first - AT91F_PDC_SetNextTx(pPDC, (char *) 0, 0); - AT91F_PDC_SetNextRx(pPDC, (char *) 0, 0); - AT91F_PDC_SetTx(pPDC, (char *) 0, 0); - AT91F_PDC_SetRx(pPDC, (char *) 0, 0); - - //* Enable the RX and TX PDC transfer requests - AT91F_PDC_EnableRx(pPDC); - AT91F_PDC_EnableTx(pPDC); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_Close -//* \brief Close PDC: disable TX and RX reset transfer descriptors -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_Close ( - AT91PS_PDC pPDC) // \arg pointer to a PDC controller -{ - //* Disable the RX and TX PDC transfer requests - AT91F_PDC_DisableRx(pPDC); - AT91F_PDC_DisableTx(pPDC); - - //* Reset all Counter register Next buffer first - AT91F_PDC_SetNextTx(pPDC, (char *) 0, 0); - AT91F_PDC_SetNextRx(pPDC, (char *) 0, 0); - AT91F_PDC_SetTx(pPDC, (char *) 0, 0); - AT91F_PDC_SetRx(pPDC, (char *) 0, 0); - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_SendFrame -//* \brief Close PDC: disable TX and RX reset transfer descriptors -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PDC_SendFrame( - AT91PS_PDC pPDC, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - if (AT91F_PDC_IsTxEmpty(pPDC)) { - //* Buffer and next buffer can be initialized - AT91F_PDC_SetTx(pPDC, pBuffer, szBuffer); - AT91F_PDC_SetNextTx(pPDC, pNextBuffer, szNextBuffer); - return 2; - } - else if (AT91F_PDC_IsNextTxEmpty(pPDC)) { - //* Only one buffer can be initialized - AT91F_PDC_SetNextTx(pPDC, pBuffer, szBuffer); - return 1; - } - else { - //* All buffer are in use... - return 0; - } -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_ReceiveFrame -//* \brief Close PDC: disable TX and RX reset transfer descriptors -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PDC_ReceiveFrame ( - AT91PS_PDC pPDC, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - if (AT91F_PDC_IsRxEmpty(pPDC)) { - //* Buffer and next buffer can be initialized - AT91F_PDC_SetRx(pPDC, pBuffer, szBuffer); - AT91F_PDC_SetNextRx(pPDC, pNextBuffer, szNextBuffer); - return 2; - } - else if (AT91F_PDC_IsNextRxEmpty(pPDC)) { - //* Only one buffer can be initialized - AT91F_PDC_SetNextRx(pPDC, pBuffer, szBuffer); - return 1; - } - else { - //* All buffer are in use... - return 0; - } -} -/* ***************************************************************************** - SOFTWARE API FOR DBGU - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_DBGU_InterruptEnable -//* \brief Enable DBGU Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_DBGU_InterruptEnable( - AT91PS_DBGU pDbgu, // \arg pointer to a DBGU controller - unsigned int flag) // \arg dbgu interrupt to be enabled -{ - pDbgu->DBGU_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_DBGU_InterruptDisable -//* \brief Disable DBGU Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_DBGU_InterruptDisable( - AT91PS_DBGU pDbgu, // \arg pointer to a DBGU controller - unsigned int flag) // \arg dbgu interrupt to be disabled -{ - pDbgu->DBGU_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_DBGU_GetInterruptMaskStatus -//* \brief Return DBGU Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_DBGU_GetInterruptMaskStatus( // \return DBGU Interrupt Mask Status - AT91PS_DBGU pDbgu) // \arg pointer to a DBGU controller -{ - return pDbgu->DBGU_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_DBGU_IsInterruptMasked -//* \brief Test if DBGU Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_DBGU_IsInterruptMasked( - AT91PS_DBGU pDbgu, // \arg pointer to a DBGU controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_DBGU_GetInterruptMaskStatus(pDbgu) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR RTC - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_RTC_InterruptEnable -//* \brief Enable RTC Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_RTC_InterruptEnable( - AT91PS_RTC pRtc, // \arg pointer to a RTC controller - unsigned int flag) // \arg RTC interrupt to be enabled -{ - pRtc->RTC_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_RTC_InterruptDisable -//* \brief Disable RTC Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_RTC_InterruptDisable( - AT91PS_RTC pRtc, // \arg pointer to a RTC controller - unsigned int flag) // \arg RTC interrupt to be disabled -{ - pRtc->RTC_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_RTC_GetInterruptMaskStatus -//* \brief Return RTC Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_RTC_GetInterruptMaskStatus( // \return RTC Interrupt Mask Status - AT91PS_RTC pRtc) // \arg pointer to a RTC controller -{ - return pRtc->RTC_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_RTC_IsInterruptMasked -//* \brief Test if RTC Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_RTC_IsInterruptMasked( - AT91PS_RTC pRtc, // \arg pointer to a RTC controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_RTC_GetInterruptMaskStatus(pRtc) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR SSC - ***************************************************************************** */ -//* Define the standard I2S mode configuration - -//* Configuration to set in the SSC Transmit Clock Mode Register -//* Parameters : nb_bit_by_slot : 8, 16 or 32 bits -//* nb_slot_by_frame : number of channels -#define AT91C_I2S_ASY_MASTER_TX_SETTING(nb_bit_by_slot, nb_slot_by_frame)( +\ - AT91C_SSC_CKS_DIV +\ - AT91C_SSC_CKO_CONTINOUS +\ - AT91C_SSC_CKG_NONE +\ - AT91C_SSC_START_FALL_RF +\ - AT91C_SSC_STTOUT +\ - ((1<<16) & AT91C_SSC_STTDLY) +\ - ((((nb_bit_by_slot*nb_slot_by_frame)/2)-1) <<24)) - - -//* Configuration to set in the SSC Transmit Frame Mode Register -//* Parameters : nb_bit_by_slot : 8, 16 or 32 bits -//* nb_slot_by_frame : number of channels -#define AT91C_I2S_ASY_TX_FRAME_SETTING(nb_bit_by_slot, nb_slot_by_frame)( +\ - (nb_bit_by_slot-1) +\ - AT91C_SSC_MSBF +\ - (((nb_slot_by_frame-1)<<8) & AT91C_SSC_DATNB) +\ - (((nb_bit_by_slot-1)<<16) & AT91C_SSC_FSLEN) +\ - AT91C_SSC_FSOS_NEGATIVE) - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_SetBaudrate -//* \brief Set the baudrate according to the CPU clock -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_SetBaudrate ( - AT91PS_SSC pSSC, // \arg pointer to a SSC controller - unsigned int mainClock, // \arg peripheral clock - unsigned int speed) // \arg SSC baudrate -{ - unsigned int baud_value; - //* Define the baud rate divisor register - if (speed == 0) - baud_value = 0; - else - { - baud_value = (unsigned int) (mainClock * 10)/(2*speed); - if ((baud_value % 10) >= 5) - baud_value = (baud_value / 10) + 1; - else - baud_value /= 10; - } - - pSSC->SSC_CMR = baud_value; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_Configure -//* \brief Configure SSC -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_Configure ( - AT91PS_SSC pSSC, // \arg pointer to a SSC controller - unsigned int syst_clock, // \arg System Clock Frequency - unsigned int baud_rate, // \arg Expected Baud Rate Frequency - unsigned int clock_rx, // \arg Receiver Clock Parameters - unsigned int mode_rx, // \arg mode Register to be programmed - unsigned int clock_tx, // \arg Transmitter Clock Parameters - unsigned int mode_tx) // \arg mode Register to be programmed -{ - //* Disable interrupts - pSSC->SSC_IDR = (unsigned int) -1; - - //* Reset receiver and transmitter - pSSC->SSC_CR = AT91C_SSC_SWRST | AT91C_SSC_RXDIS | AT91C_SSC_TXDIS ; - - //* Define the Clock Mode Register - AT91F_SSC_SetBaudrate(pSSC, syst_clock, baud_rate); - - //* Write the Receive Clock Mode Register - pSSC->SSC_RCMR = clock_rx; - - //* Write the Transmit Clock Mode Register - pSSC->SSC_TCMR = clock_tx; - - //* Write the Receive Frame Mode Register - pSSC->SSC_RFMR = mode_rx; - - //* Write the Transmit Frame Mode Register - pSSC->SSC_TFMR = mode_tx; - - //* Clear Transmit and Receive Counters - AT91F_PDC_Open((AT91PS_PDC) &(pSSC->SSC_RPR)); - - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_EnableRx -//* \brief Enable receiving datas -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_EnableRx ( - AT91PS_SSC pSSC) // \arg pointer to a SSC controller -{ - //* Enable receiver - pSSC->SSC_CR = AT91C_SSC_RXEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_DisableRx -//* \brief Disable receiving datas -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_DisableRx ( - AT91PS_SSC pSSC) // \arg pointer to a SSC controller -{ - //* Disable receiver - pSSC->SSC_CR = AT91C_SSC_RXDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_EnableTx -//* \brief Enable sending datas -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_EnableTx ( - AT91PS_SSC pSSC) // \arg pointer to a SSC controller -{ - //* Enable transmitter - pSSC->SSC_CR = AT91C_SSC_TXEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_DisableTx -//* \brief Disable sending datas -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_DisableTx ( - AT91PS_SSC pSSC) // \arg pointer to a SSC controller -{ - //* Disable transmitter - pSSC->SSC_CR = AT91C_SSC_TXDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_EnableIt -//* \brief Enable SSC IT -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_EnableIt ( - AT91PS_SSC pSSC, // \arg pointer to a SSC controller - unsigned int flag) // \arg IT to be enabled -{ - //* Write to the IER register - pSSC->SSC_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_DisableIt -//* \brief Disable SSC IT -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_DisableIt ( - AT91PS_SSC pSSC, // \arg pointer to a SSC controller - unsigned int flag) // \arg IT to be disabled -{ - //* Write to the IDR register - pSSC->SSC_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_ReceiveFrame -//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initialized with Next Buffer, 0 if PDC is busy -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_SSC_ReceiveFrame ( - AT91PS_SSC pSSC, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - return AT91F_PDC_ReceiveFrame( - (AT91PS_PDC) &(pSSC->SSC_RPR), - pBuffer, - szBuffer, - pNextBuffer, - szNextBuffer); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_SendFrame -//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initialized with Next Buffer, 0 if PDC is busy -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_SSC_SendFrame( - AT91PS_SSC pSSC, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - return AT91F_PDC_SendFrame( - (AT91PS_PDC) &(pSSC->SSC_RPR), - pBuffer, - szBuffer, - pNextBuffer, - szNextBuffer); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_GetInterruptMaskStatus -//* \brief Return SSC Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_SSC_GetInterruptMaskStatus( // \return SSC Interrupt Mask Status - AT91PS_SSC pSsc) // \arg pointer to a SSC controller -{ - return pSsc->SSC_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_IsInterruptMasked -//* \brief Test if SSC Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_SSC_IsInterruptMasked( - AT91PS_SSC pSsc, // \arg pointer to a SSC controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_SSC_GetInterruptMaskStatus(pSsc) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR SPI - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_Open -//* \brief Open a SPI Port -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_SPI_Open ( - const unsigned int null) // \arg -{ - /* NOT DEFINED AT THIS MOMENT */ - return ( 0 ); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_CfgCs -//* \brief Configure SPI chip select register -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_CfgCs ( - int cs, // SPI cs number (0 to 3) - int val) // chip select register -{ - //* Write to the CSR register - *(AT91C_SPI_CSR + cs) = val; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_EnableIt -//* \brief Enable SPI interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_EnableIt ( - AT91PS_SPI pSPI, // pointer to a SPI controller - unsigned int flag) // IT to be enabled -{ - //* Write to the IER register - pSPI->SPI_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_DisableIt -//* \brief Disable SPI interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_DisableIt ( - AT91PS_SPI pSPI, // pointer to a SPI controller - unsigned int flag) // IT to be disabled -{ - //* Write to the IDR register - pSPI->SPI_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_Reset -//* \brief Reset the SPI controller -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_Reset ( - AT91PS_SPI pSPI // pointer to a SPI controller - ) -{ - //* Write to the CR register - pSPI->SPI_CR = AT91C_SPI_SWRST; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_Enable -//* \brief Enable the SPI controller -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_Enable ( - AT91PS_SPI pSPI // pointer to a SPI controller - ) -{ - //* Write to the CR register - pSPI->SPI_CR = AT91C_SPI_SPIEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_Disable -//* \brief Disable the SPI controller -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_Disable ( - AT91PS_SPI pSPI // pointer to a SPI controller - ) -{ - //* Write to the CR register - pSPI->SPI_CR = AT91C_SPI_SPIDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_CfgMode -//* \brief Enable the SPI controller -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_CfgMode ( - AT91PS_SPI pSPI, // pointer to a SPI controller - int mode) // mode register -{ - //* Write to the MR register - pSPI->SPI_MR = mode; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_CfgPCS -//* \brief Switch to the correct PCS of SPI Mode Register : Fixed Peripheral Selected -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_CfgPCS ( - AT91PS_SPI pSPI, // pointer to a SPI controller - char PCS_Device) // PCS of the Device -{ - //* Write to the MR register - pSPI->SPI_MR &= 0xFFF0FFFF; - pSPI->SPI_MR |= ( (PCS_Device<<16) & AT91C_SPI_PCS ); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_ReceiveFrame -//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is busy -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_SPI_ReceiveFrame ( - AT91PS_SPI pSPI, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - return AT91F_PDC_ReceiveFrame( - (AT91PS_PDC) &(pSPI->SPI_RPR), - pBuffer, - szBuffer, - pNextBuffer, - szNextBuffer); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_SendFrame -//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is bSPIy -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_SPI_SendFrame( - AT91PS_SPI pSPI, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - return AT91F_PDC_SendFrame( - (AT91PS_PDC) &(pSPI->SPI_RPR), - pBuffer, - szBuffer, - pNextBuffer, - szNextBuffer); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_Close -//* \brief Close SPI: disable IT disable transfert, close PDC -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_Close ( - AT91PS_SPI pSPI) // \arg pointer to a SPI controller -{ - //* Reset all the Chip Select register - pSPI->SPI_CSR[0] = 0 ; - pSPI->SPI_CSR[1] = 0 ; - pSPI->SPI_CSR[2] = 0 ; - pSPI->SPI_CSR[3] = 0 ; - - //* Reset the SPI mode - pSPI->SPI_MR = 0 ; - - //* Disable all interrupts - pSPI->SPI_IDR = 0xFFFFFFFF ; - - //* Abort the Peripheral Data Transfers - AT91F_PDC_Close((AT91PS_PDC) &(pSPI->SPI_RPR)); - - //* Disable receiver and transmitter and stop any activity immediately - pSPI->SPI_CR = AT91C_SPI_SPIDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_PutChar -//* \brief Send a character,does not check if ready to send -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_PutChar ( - AT91PS_SPI pSPI, - unsigned int character, - unsigned int cs_number ) -{ - unsigned int value_for_cs; - value_for_cs = (~(1 << cs_number)) & 0xF; //Place a zero among a 4 ONEs number - pSPI->SPI_TDR = (character & 0xFFFF) | (value_for_cs << 16); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_GetChar -//* \brief Receive a character,does not check if a character is available -//*---------------------------------------------------------------------------- -static inline int AT91F_SPI_GetChar ( - const AT91PS_SPI pSPI) -{ - return((pSPI->SPI_RDR) & 0xFFFF); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_GetInterruptMaskStatus -//* \brief Return SPI Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_SPI_GetInterruptMaskStatus( // \return SPI Interrupt Mask Status - AT91PS_SPI pSpi) // \arg pointer to a SPI controller -{ - return pSpi->SPI_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_IsInterruptMasked -//* \brief Test if SPI Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_SPI_IsInterruptMasked( - AT91PS_SPI pSpi, // \arg pointer to a SPI controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_SPI_GetInterruptMaskStatus(pSpi) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR TC - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC_InterruptEnable -//* \brief Enable TC Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_TC_InterruptEnable( - AT91PS_TC pTc, // \arg pointer to a TC controller - unsigned int flag) // \arg TC interrupt to be enabled -{ - pTc->TC_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC_InterruptDisable -//* \brief Disable TC Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_TC_InterruptDisable( - AT91PS_TC pTc, // \arg pointer to a TC controller - unsigned int flag) // \arg TC interrupt to be disabled -{ - pTc->TC_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC_GetInterruptMaskStatus -//* \brief Return TC Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_TC_GetInterruptMaskStatus( // \return TC Interrupt Mask Status - AT91PS_TC pTc) // \arg pointer to a TC controller -{ - return pTc->TC_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC_IsInterruptMasked -//* \brief Test if TC Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_TC_IsInterruptMasked( - AT91PS_TC pTc, // \arg pointer to a TC controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_TC_GetInterruptMaskStatus(pTc) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR PMC - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_CKGR_GetMainClock -//* \brief Return Main clock in Hz -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_CKGR_GetMainClock ( - AT91PS_CKGR pCKGR, // \arg pointer to CKGR controller - unsigned int slowClock) // \arg slowClock in Hz -{ - return ((pCKGR->CKGR_MCFR & AT91C_CKGR_MAINF) * slowClock) >> 4; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_GetProcessorClock -//* \brief Return processor clock in Hz (for AT91RM3400 and AT91RM9200) -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PMC_GetProcessorClock ( - AT91PS_PMC pPMC, // \arg pointer to PMC controller - AT91PS_CKGR pCKGR, // \arg pointer to CKGR controller - unsigned int slowClock) // \arg slowClock in Hz -{ - unsigned int reg = pPMC->PMC_MCKR; - unsigned int prescaler = (1 << ((reg & AT91C_PMC_PRES) >> 2)); - unsigned int pllDivider, pllMultiplier; - - switch (reg & AT91C_PMC_CSS) { - case AT91C_PMC_CSS_SLOW_CLK: // Slow clock selected - return slowClock / prescaler; - case AT91C_PMC_CSS_MAIN_CLK: // Main clock is selected - return AT91F_CKGR_GetMainClock(pCKGR, slowClock) / prescaler; - case AT91C_PMC_CSS_PLLA_CLK: // PLLA clock is selected - reg = pCKGR->CKGR_PLLAR; - pllDivider = (reg & AT91C_CKGR_DIVA); - pllMultiplier = ((reg & AT91C_CKGR_MULA) >> 16) + 1; - if (reg & AT91C_CKGR_SRCA) // Source is Main clock - return AT91F_CKGR_GetMainClock(pCKGR, slowClock) / pllDivider * pllMultiplier / prescaler; - else // Source is Slow clock - return slowClock / pllDivider * pllMultiplier / prescaler; - case AT91C_PMC_CSS_PLLB_CLK: // PLLB clock is selected - reg = pCKGR->CKGR_PLLBR; - pllDivider = (reg & AT91C_CKGR_DIVB); - pllMultiplier = ((reg & AT91C_CKGR_MULB) >> 16) + 1; - return AT91F_CKGR_GetMainClock(pCKGR, slowClock) / pllDivider * pllMultiplier / prescaler; - } - return 0; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_GetMasterClock -//* \brief Return master clock in Hz (just for AT91RM9200) -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PMC_GetMasterClock ( - AT91PS_PMC pPMC, // \arg pointer to PMC controller - AT91PS_CKGR pCKGR, // \arg pointer to CKGR controller - unsigned int slowClock) // \arg slowClock in Hz -{ - return AT91F_PMC_GetProcessorClock(pPMC, pCKGR, slowClock) / - (((pPMC->PMC_MCKR & AT91C_PMC_MDIV) >> 8)+1); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_EnablePeriphClock -//* \brief Enable peripheral clock -//*---------------------------------------------------------------------------- -static inline void AT91F_PMC_EnablePeriphClock ( - AT91PS_PMC pPMC, // \arg pointer to PMC controller - unsigned int periphIds) // \arg IDs of peripherals to enable -{ - pPMC->PMC_PCER = periphIds; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_DisablePeriphClock -//* \brief Enable peripheral clock -//*---------------------------------------------------------------------------- -static inline void AT91F_PMC_DisablePeriphClock ( - AT91PS_PMC pPMC, // \arg pointer to PMC controller - unsigned int periphIds) // \arg IDs of peripherals to enable -{ - pPMC->PMC_PCDR = periphIds; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_EnablePCK -//* \brief Enable peripheral clock -//*---------------------------------------------------------------------------- -static inline void AT91F_PMC_EnablePCK ( - AT91PS_PMC pPMC, // \arg pointer to PMC controller - unsigned int pck, // \arg Peripheral clock identifier 0 .. 7 - unsigned int ccs, // \arg clock selection: AT91C_PMC_CSS_SLOW_CLK, AT91C_PMC_CSS_MAIN_CLK, AT91C_PMC_CSS_PLLA_CLK, AT91C_PMC_CSS_PLLB_CLK - unsigned int pres) // \arg Programmable clock prescalar AT91C_PMC_PRES_CLK, AT91C_PMC_PRES_CLK_2, ..., AT91C_PMC_PRES_CLK_64 -{ - pPMC->PMC_PCKR[pck] = ccs | pres; - pPMC->PMC_SCER = (1 << pck) << 8; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_DisablePCK -//* \brief Enable peripheral clock -//*---------------------------------------------------------------------------- -static inline void AT91F_PMC_DisablePCK ( - AT91PS_PMC pPMC, // \arg pointer to PMC controller - unsigned int pck) // \arg Peripheral clock identifier 0 .. 7 -{ - pPMC->PMC_SCDR = (1 << pck) << 8; -} - -/* ***************************************************************************** - SOFTWARE API FOR PIO - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_CfgPeriph -//* \brief Enable pins to be drived by peripheral -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_CfgPeriph( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int periphAEnable, // \arg PERIPH A to enable - unsigned int periphBEnable) // \arg PERIPH B to enable - -{ - pPio->PIO_ASR = periphAEnable; - pPio->PIO_BSR = periphBEnable; - pPio->PIO_PDR = (periphAEnable | periphBEnable); // Set in Periph mode -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_CfgOutput -//* \brief Enable PIO in output mode -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_CfgOutput( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int pioEnable) // \arg PIO to be enabled -{ - pPio->PIO_PER = pioEnable; // Set in PIO mode - pPio->PIO_OER = pioEnable; // Configure in Output -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_CfgInput -//* \brief Enable PIO in input mode -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_CfgInput( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int inputEnable) // \arg PIO to be enabled -{ - // Disable output - pPio->PIO_ODR = inputEnable; - pPio->PIO_PER = inputEnable; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_CfgOpendrain -//* \brief Configure PIO in open drain -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_CfgOpendrain( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int multiDrvEnable) // \arg pio to be configured in open drain -{ - // Configure the multi-drive option - pPio->PIO_MDDR = ~multiDrvEnable; - pPio->PIO_MDER = multiDrvEnable; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_CfgPullup -//* \brief Enable pullup on PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_CfgPullup( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int pullupEnable) // \arg enable pullup on PIO -{ - // Connect or not Pullup - pPio->PIO_PPUDR = ~pullupEnable; - pPio->PIO_PPUER = pullupEnable; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_CfgDirectDrive -//* \brief Enable direct drive on PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_CfgDirectDrive( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int directDrive) // \arg PIO to be configured with direct drive - -{ - // Configure the Direct Drive - pPio->PIO_OWDR = ~directDrive; - pPio->PIO_OWER = directDrive; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_CfgInputFilter -//* \brief Enable input filter on input PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_CfgInputFilter( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int inputFilter) // \arg PIO to be configured with input filter - -{ - // Configure the Direct Drive - pPio->PIO_IFDR = ~inputFilter; - pPio->PIO_IFER = inputFilter; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetInput -//* \brief Return PIO input value -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetInput( // \return PIO input - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_PDSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsInputSet -//* \brief Test if PIO is input flag is active -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsInputSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetInput(pPio) & flag); -} - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_SetOutput -//* \brief Set to 1 output PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_SetOutput( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg output to be set -{ - pPio->PIO_SODR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_ClearOutput -//* \brief Set to 0 output PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_ClearOutput( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg output to be cleared -{ - pPio->PIO_CODR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_ForceOutput -//* \brief Force output when Direct drive option is enabled -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_ForceOutput( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg output to be forced -{ - pPio->PIO_ODSR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_Enable -//* \brief Enable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_Enable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio to be enabled -{ - pPio->PIO_PER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_Disable -//* \brief Disable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_Disable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio to be disabled -{ - pPio->PIO_PDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetStatus -//* \brief Return PIO Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetStatus( // \return PIO Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_PSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsSet -//* \brief Test if PIO is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_OutputEnable -//* \brief Output Enable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_OutputEnable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio output to be enabled -{ - pPio->PIO_OER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_OutputDisable -//* \brief Output Enable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_OutputDisable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio output to be disabled -{ - pPio->PIO_ODR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetOutputStatus -//* \brief Return PIO Output Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetOutputStatus( // \return PIO Output Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_OSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsOuputSet -//* \brief Test if PIO Output is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsOutputSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetOutputStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_InputFilterEnable -//* \brief Input Filter Enable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_InputFilterEnable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio input filter to be enabled -{ - pPio->PIO_IFER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_InputFilterDisable -//* \brief Input Filter Disable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_InputFilterDisable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio input filter to be disabled -{ - pPio->PIO_IFDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetInputFilterStatus -//* \brief Return PIO Input Filter Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetInputFilterStatus( // \return PIO Input Filter Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_IFSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsInputFilterSet -//* \brief Test if PIO Input filter is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsInputFilterSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetInputFilterStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetOutputDataStatus -//* \brief Return PIO Output Data Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetOutputDataStatus( // \return PIO Output Data Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_ODSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_InterruptEnable -//* \brief Enable PIO Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_InterruptEnable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio interrupt to be enabled -{ - pPio->PIO_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_InterruptDisable -//* \brief Disable PIO Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_InterruptDisable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio interrupt to be disabled -{ - pPio->PIO_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetInterruptMaskStatus -//* \brief Return PIO Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetInterruptMaskStatus( // \return PIO Interrupt Mask Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetInterruptStatus -//* \brief Return PIO Interrupt Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetInterruptStatus( // \return PIO Interrupt Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_ISR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsInterruptMasked -//* \brief Test if PIO Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsInterruptMasked( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetInterruptMaskStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsInterruptSet -//* \brief Test if PIO Interrupt is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsInterruptSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetInterruptStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_MultiDriverEnable -//* \brief Multi Driver Enable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_MultiDriverEnable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio to be enabled -{ - pPio->PIO_MDER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_MultiDriverDisable -//* \brief Multi Driver Disable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_MultiDriverDisable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio to be disabled -{ - pPio->PIO_MDDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetMultiDriverStatus -//* \brief Return PIO Multi Driver Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetMultiDriverStatus( // \return PIO Multi Driver Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_MDSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsMultiDriverSet -//* \brief Test if PIO MultiDriver is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsMultiDriverSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetMultiDriverStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_A_RegisterSelection -//* \brief PIO A Register Selection -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_A_RegisterSelection( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio A register selection -{ - pPio->PIO_ASR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_B_RegisterSelection -//* \brief PIO B Register Selection -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_B_RegisterSelection( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio B register selection -{ - pPio->PIO_BSR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_Get_AB_RegisterStatus -//* \brief Return PIO Interrupt Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_Get_AB_RegisterStatus( // \return PIO AB Register Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_ABSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsAB_RegisterSet -//* \brief Test if PIO AB Register is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsAB_RegisterSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_Get_AB_RegisterStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_OutputWriteEnable -//* \brief Output Write Enable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_OutputWriteEnable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio output write to be enabled -{ - pPio->PIO_OWER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_OutputWriteDisable -//* \brief Output Write Disable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_OutputWriteDisable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio output write to be disabled -{ - pPio->PIO_OWDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetOutputWriteStatus -//* \brief Return PIO Output Write Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetOutputWriteStatus( // \return PIO Output Write Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_OWSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsOutputWriteSet -//* \brief Test if PIO OutputWrite is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsOutputWriteSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetOutputWriteStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetCfgPullup -//* \brief Return PIO Configuration Pullup -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetCfgPullup( // \return PIO Configuration Pullup - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_PPUSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsOutputDataStatusSet -//* \brief Test if PIO Output Data Status is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsOutputDataStatusSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetOutputDataStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsCfgPullupStatusSet -//* \brief Test if PIO Configuration Pullup Status is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsCfgPullupStatusSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (~AT91F_PIO_GetCfgPullup(pPio) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR TWI - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_TWI_EnableIt -//* \brief Enable TWI IT -//*---------------------------------------------------------------------------- -static inline void AT91F_TWI_EnableIt ( - AT91PS_TWI pTWI, // \arg pointer to a TWI controller - unsigned int flag) // \arg IT to be enabled -{ - //* Write to the IER register - pTWI->TWI_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TWI_DisableIt -//* \brief Disable TWI IT -//*---------------------------------------------------------------------------- -static inline void AT91F_TWI_DisableIt ( - AT91PS_TWI pTWI, // \arg pointer to a TWI controller - unsigned int flag) // \arg IT to be disabled -{ - //* Write to the IDR register - pTWI->TWI_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TWI_Configure -//* \brief Configure TWI in master mode -//*---------------------------------------------------------------------------- -static inline void AT91F_TWI_Configure ( AT91PS_TWI pTWI ) // \arg pointer to a TWI controller -{ - //* Disable interrupts - pTWI->TWI_IDR = (unsigned int) -1; - - //* Reset peripheral - pTWI->TWI_CR = AT91C_TWI_SWRST; - - //* Set Master mode - pTWI->TWI_CR = AT91C_TWI_MSEN | AT91C_TWI_SVDIS; - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TWI_GetInterruptMaskStatus -//* \brief Return TWI Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_TWI_GetInterruptMaskStatus( // \return TWI Interrupt Mask Status - AT91PS_TWI pTwi) // \arg pointer to a TWI controller -{ - return pTwi->TWI_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TWI_IsInterruptMasked -//* \brief Test if TWI Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_TWI_IsInterruptMasked( - AT91PS_TWI pTwi, // \arg pointer to a TWI controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_TWI_GetInterruptMaskStatus(pTwi) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR USART - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_Baudrate -//* \brief Calculate the baudrate -//* Standard Asynchronous Mode : 8 bits , 1 stop , no parity -#define AT91C_US_ASYNC_MODE ( AT91C_US_USMODE_NORMAL + \ - AT91C_US_NBSTOP_1_BIT + \ - AT91C_US_PAR_NONE + \ - AT91C_US_CHRL_8_BITS + \ - AT91C_US_CLKS_CLOCK ) - -//* Standard External Asynchronous Mode : 8 bits , 1 stop , no parity -#define AT91C_US_ASYNC_SCK_MODE ( AT91C_US_USMODE_NORMAL + \ - AT91C_US_NBSTOP_1_BIT + \ - AT91C_US_PAR_NONE + \ - AT91C_US_CHRL_8_BITS + \ - AT91C_US_CLKS_EXT ) - -//* Standard Synchronous Mode : 8 bits , 1 stop , no parity -#define AT91C_US_SYNC_MODE ( AT91C_US_SYNC + \ - AT91C_US_USMODE_NORMAL + \ - AT91C_US_NBSTOP_1_BIT + \ - AT91C_US_PAR_NONE + \ - AT91C_US_CHRL_8_BITS + \ - AT91C_US_CLKS_CLOCK ) - -//* SCK used Label -#define AT91C_US_SCK_USED (AT91C_US_CKLO | AT91C_US_CLKS_EXT) - -//* Standard ISO T=0 Mode : 8 bits , 1 stop , parity -#define AT91C_US_ISO_READER_MODE ( AT91C_US_USMODE_ISO7816_0 + \ - AT91C_US_CLKS_CLOCK +\ - AT91C_US_NBSTOP_1_BIT + \ - AT91C_US_PAR_EVEN + \ - AT91C_US_CHRL_8_BITS + \ - AT91C_US_CKLO +\ - AT91C_US_OVER) - -//* Standard IRDA mode -#define AT91C_US_ASYNC_IRDA_MODE ( AT91C_US_USMODE_IRDA + \ - AT91C_US_NBSTOP_1_BIT + \ - AT91C_US_PAR_NONE + \ - AT91C_US_CHRL_8_BITS + \ - AT91C_US_CLKS_CLOCK ) - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_Baudrate -//* \brief Caluculate baud_value according to the main clock and the baud rate -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_US_Baudrate ( - const unsigned int main_clock, // \arg peripheral clock - const unsigned int baud_rate) // \arg UART baudrate -{ - unsigned int baud_value = ((main_clock*10)/(baud_rate * 16)); - if ((baud_value % 10) >= 5) - baud_value = (baud_value / 10) + 1; - else - baud_value /= 10; - return baud_value; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_SetBaudrate -//* \brief Set the baudrate according to the CPU clock -//*---------------------------------------------------------------------------- -static inline void AT91F_US_SetBaudrate ( - AT91PS_USART pUSART, // \arg pointer to a USART controller - unsigned int mainClock, // \arg peripheral clock - unsigned int speed) // \arg UART baudrate -{ - //* Define the baud rate divisor register - pUSART->US_BRGR = AT91F_US_Baudrate(mainClock, speed); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_SetTimeguard -//* \brief Set USART timeguard -//*---------------------------------------------------------------------------- -static inline void AT91F_US_SetTimeguard ( - AT91PS_USART pUSART, // \arg pointer to a USART controller - unsigned int timeguard) // \arg timeguard value -{ - //* Write the Timeguard Register - pUSART->US_TTGR = timeguard ; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_EnableIt -//* \brief Enable USART IT -//*---------------------------------------------------------------------------- -static inline void AT91F_US_EnableIt ( - AT91PS_USART pUSART, // \arg pointer to a USART controller - unsigned int flag) // \arg IT to be enabled -{ - //* Write to the IER register - pUSART->US_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_DisableIt -//* \brief Disable USART IT -//*---------------------------------------------------------------------------- -static inline void AT91F_US_DisableIt ( - AT91PS_USART pUSART, // \arg pointer to a USART controller - unsigned int flag) // \arg IT to be disabled -{ - //* Write to the IER register - pUSART->US_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_Configure -//* \brief Configure USART -//*---------------------------------------------------------------------------- -static inline void AT91F_US_Configure ( - AT91PS_USART pUSART, // \arg pointer to a USART controller - unsigned int mainClock, // \arg peripheral clock - unsigned int mode , // \arg mode Register to be programmed - unsigned int baudRate , // \arg baudrate to be programmed - unsigned int timeguard ) // \arg timeguard to be programmed -{ - //* Disable interrupts - pUSART->US_IDR = (unsigned int) -1; - - //* Reset receiver and transmitter - pUSART->US_CR = AT91C_US_RSTRX | AT91C_US_RSTTX | AT91C_US_RXDIS | AT91C_US_TXDIS ; - - //* Define the baud rate divisor register - AT91F_US_SetBaudrate(pUSART, mainClock, baudRate); - - //* Write the Timeguard Register - AT91F_US_SetTimeguard(pUSART, timeguard); - - //* Clear Transmit and Receive Counters - AT91F_PDC_Open((AT91PS_PDC) &(pUSART->US_RPR)); - - //* Define the USART mode - pUSART->US_MR = mode ; - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_EnableRx -//* \brief Enable receiving characters -//*---------------------------------------------------------------------------- -static inline void AT91F_US_EnableRx ( - AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Enable receiver - pUSART->US_CR = AT91C_US_RXEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_EnableTx -//* \brief Enable sending characters -//*---------------------------------------------------------------------------- -static inline void AT91F_US_EnableTx ( - AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Enable transmitter - pUSART->US_CR = AT91C_US_TXEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_ResetRx -//* \brief Reset Receiver and re-enable it -//*---------------------------------------------------------------------------- -static inline void AT91F_US_ResetRx ( - AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Reset receiver - pUSART->US_CR = AT91C_US_RSTRX; - //* Re-Enable receiver - pUSART->US_CR = AT91C_US_RXEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_ResetTx -//* \brief Reset Transmitter and re-enable it -//*---------------------------------------------------------------------------- -static inline void AT91F_US_ResetTx ( - AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Reset transmitter - pUSART->US_CR = AT91C_US_RSTTX; - //* Enable transmitter - pUSART->US_CR = AT91C_US_TXEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_DisableRx -//* \brief Disable Receiver -//*---------------------------------------------------------------------------- -static inline void AT91F_US_DisableRx ( - AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Disable receiver - pUSART->US_CR = AT91C_US_RXDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_DisableTx -//* \brief Disable Transmitter -//*---------------------------------------------------------------------------- -static inline void AT91F_US_DisableTx ( - AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Disable transmitter - pUSART->US_CR = AT91C_US_TXDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_Close -//* \brief Close USART: disable IT disable receiver and transmitter, close PDC -//*---------------------------------------------------------------------------- -static inline void AT91F_US_Close ( - AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Reset the baud rate divisor register - pUSART->US_BRGR = 0 ; - - //* Reset the USART mode - pUSART->US_MR = 0 ; - - //* Reset the Timeguard Register - pUSART->US_TTGR = 0; - - //* Disable all interrupts - pUSART->US_IDR = 0xFFFFFFFF ; - - //* Abort the Peripheral Data Transfers - AT91F_PDC_Close((AT91PS_PDC) &(pUSART->US_RPR)); - - //* Disable receiver and transmitter and stop any activity immediately - pUSART->US_CR = AT91C_US_TXDIS | AT91C_US_RXDIS | AT91C_US_RSTTX | AT91C_US_RSTRX ; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_TxReady -//* \brief Return 1 if a character can be written in US_THR -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_US_TxReady ( - AT91PS_USART pUSART ) // \arg pointer to a USART controller -{ - return (pUSART->US_CSR & AT91C_US_TXRDY); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_RxReady -//* \brief Return 1 if a character can be read in US_RHR -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_US_RxReady ( - AT91PS_USART pUSART ) // \arg pointer to a USART controller -{ - return (pUSART->US_CSR & AT91C_US_RXRDY); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_Error -//* \brief Return the error flag -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_US_Error ( - AT91PS_USART pUSART ) // \arg pointer to a USART controller -{ - return (pUSART->US_CSR & - (AT91C_US_OVRE | // Overrun error - AT91C_US_FRAME | // Framing error - AT91C_US_PARE)); // Parity error -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_PutChar -//* \brief Send a character,does not check if ready to send -//*---------------------------------------------------------------------------- -static inline void AT91F_US_PutChar ( - AT91PS_USART pUSART, - int character ) -{ - pUSART->US_THR = (character & 0x1FF); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_GetChar -//* \brief Receive a character,does not check if a character is available -//*---------------------------------------------------------------------------- -static inline int AT91F_US_GetChar ( - const AT91PS_USART pUSART) -{ - return((pUSART->US_RHR) & 0x1FF); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_SendFrame -//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is busy -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_US_SendFrame( - AT91PS_USART pUSART, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - return AT91F_PDC_SendFrame( - (AT91PS_PDC) &(pUSART->US_RPR), - pBuffer, - szBuffer, - pNextBuffer, - szNextBuffer); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_ReceiveFrame -//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is busy -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_US_ReceiveFrame ( - AT91PS_USART pUSART, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - return AT91F_PDC_ReceiveFrame( - (AT91PS_PDC) &(pUSART->US_RPR), - pBuffer, - szBuffer, - pNextBuffer, - szNextBuffer); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_SetIrdaFilter -//* \brief Set the value of IrDa filter tregister -//*---------------------------------------------------------------------------- -static inline void AT91F_US_SetIrdaFilter ( - AT91PS_USART pUSART, - unsigned char value -) -{ - pUSART->US_IF = value; -} - -/* ***************************************************************************** - SOFTWARE API FOR MCI - ***************************************************************************** */ -//* Classic MCI Mode Register Configuration with PDC mode enabled and MCK = MCI Clock -#define AT91C_MCI_MR_PDCMODE (AT91C_MCI_CLKDIV |\ - AT91C_MCI_PWSDIV |\ - (AT91C_MCI_PWSDIV<<1) |\ - AT91C_MCI_PDCMODE) - -//* Classic MCI Data Timeout Register Configuration with 1048576 MCK cycles between 2 data transfer -#define AT91C_MCI_DTOR_1MEGA_CYCLES (AT91C_MCI_DTOCYC | AT91C_MCI_DTOMUL) - -//* Classic MCI SDCard Register Configuration with 1-bit data bus on slot A -#define AT91C_MCI_MMC_SLOTA (AT91C_MCI_SCDSEL & 0x0) - -//* Classic MCI SDCard Register Configuration with 1-bit data bus on slot B -#define AT91C_MCI_MMC_SLOTB (AT91C_MCI_SCDSEL) - -//* Classic MCI SDCard Register Configuration with 4-bit data bus on slot A -#define AT91C_MCI_SDCARD_4BITS_SLOTA ( (AT91C_MCI_SCDSEL & 0x0) | AT91C_MCI_SCDBUS ) - -//* Classic MCI SDCard Register Configuration with 4-bit data bus on slot B -#define AT91C_MCI_SDCARD_4BITS_SLOTB (AT91C_MCI_SCDSEL | AT91C_MCI_SCDBUS) - - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_Configure -//* \brief Configure the MCI -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_Configure ( - AT91PS_MCI pMCI, // \arg pointer to a MCI controller - unsigned int DTOR_register, // \arg Data Timeout Register to be programmed - unsigned int MR_register, // \arg Mode Register to be programmed - unsigned int SDCR_register) // \arg SDCard Register to be programmed -{ - //* Reset the MCI - pMCI->MCI_CR = AT91C_MCI_MCIEN | AT91C_MCI_PWSEN; - - //* Disable all the interrupts - pMCI->MCI_IDR = 0xFFFFFFFF; - - //* Set the Data Timeout Register - pMCI->MCI_DTOR = DTOR_register; - - //* Set the Mode Register - pMCI->MCI_MR = MR_register; - - //* Set the SDCard Register - pMCI->MCI_SDCR = SDCR_register; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_EnableIt -//* \brief Enable MCI IT -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_EnableIt ( - AT91PS_MCI pMCI, // \arg pointer to a MCI controller - unsigned int flag) // \arg IT to be enabled -{ - //* Write to the IER register - pMCI->MCI_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_DisableIt -//* \brief Disable MCI IT -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_DisableIt ( - AT91PS_MCI pMCI, // \arg pointer to a MCI controller - unsigned int flag) // \arg IT to be disabled -{ - //* Write to the IDR register - pMCI->MCI_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_Enable_Interface -//* \brief Enable the MCI Interface -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_Enable_Interface ( - AT91PS_MCI pMCI) // \arg pointer to a MCI controller -{ - //* Enable the MCI - pMCI->MCI_CR = AT91C_MCI_MCIEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_Disable_Interface -//* \brief Disable the MCI Interface -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_Disable_Interface ( - AT91PS_MCI pMCI) // \arg pointer to a MCI controller -{ - //* Disable the MCI - pMCI->MCI_CR = AT91C_MCI_MCIDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_Cfg_ModeRegister -//* \brief Configure the MCI Mode Register -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_Cfg_ModeRegister ( - AT91PS_MCI pMCI, // \arg pointer to a MCI controller - unsigned int mode_register) // \arg value to set in the mode register -{ - //* Configure the MCI MR - pMCI->MCI_MR = mode_register; -} -/* ***************************************************************************** - SOFTWARE API FOR AIC - ***************************************************************************** */ -#define AT91C_AIC_BRANCH_OPCODE ((void (*) ()) 0xE51FFF20) // ldr, pc, [pc, #-&F20] - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_ConfigureIt -//* \brief Interrupt Handler Initialization -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_AIC_ConfigureIt ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id, // \arg interrupt number to initialize - unsigned int priority, // \arg priority to give to the interrupt - unsigned int src_type, // \arg activation and sense of activation - void (*newHandler) (void) ) // \arg address of the interrupt handler -{ - unsigned int oldHandler; - unsigned int mask ; - - oldHandler = pAic->AIC_SVR[irq_id]; - - mask = 0x1 << irq_id ; - //* Disable the interrupt on the interrupt controller - pAic->AIC_IDCR = mask ; - //* Save the interrupt handler routine pointer and the interrupt priority - pAic->AIC_SVR[irq_id] = (unsigned int) newHandler ; - //* Store the Source Mode Register - pAic->AIC_SMR[irq_id] = src_type | priority ; - //* Clear the interrupt on the interrupt controller - pAic->AIC_ICCR = mask ; - - return oldHandler; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_EnableIt -//* \brief Enable corresponding IT number -//*---------------------------------------------------------------------------- -static inline void AT91F_AIC_EnableIt ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id ) // \arg interrupt number to initialize -{ - //* Enable the interrupt on the interrupt controller - pAic->AIC_IECR = 0x1 << irq_id ; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_DisableIt -//* \brief Disable corresponding IT number -//*---------------------------------------------------------------------------- -static inline void AT91F_AIC_DisableIt ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id ) // \arg interrupt number to initialize -{ - unsigned int mask = 0x1 << irq_id; - //* Disable the interrupt on the interrupt controller - pAic->AIC_IDCR = mask ; - //* Clear the interrupt on the Interrupt Controller ( if one is pending ) - pAic->AIC_ICCR = mask ; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_ClearIt -//* \brief Clear corresponding IT number -//*---------------------------------------------------------------------------- -static inline void AT91F_AIC_ClearIt ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id) // \arg interrupt number to initialize -{ - //* Clear the interrupt on the Interrupt Controller ( if one is pending ) - pAic->AIC_ICCR = (0x1 << irq_id); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_AcknowledgeIt -//* \brief Acknowledge corresponding IT number -//*---------------------------------------------------------------------------- -static inline void AT91F_AIC_AcknowledgeIt ( - AT91PS_AIC pAic) // \arg pointer to the AIC registers -{ - pAic->AIC_EOICR = pAic->AIC_EOICR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_SetExceptionVector -//* \brief Configure vector handler -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_AIC_SetExceptionVector ( - unsigned int *pVector, // \arg pointer to the AIC registers - void (*Handler) () ) // \arg Interrupt Handler -{ - unsigned int oldVector = *pVector; - - if ((unsigned int) Handler == (unsigned int) AT91C_AIC_BRANCH_OPCODE) - *pVector = (unsigned int) AT91C_AIC_BRANCH_OPCODE; - else - *pVector = (((((unsigned int) Handler) - ((unsigned int) pVector) - 0x8) >> 2) & 0x00FFFFFF) | 0xEA000000; - - return oldVector; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_Trig -//* \brief Trig an IT -//*---------------------------------------------------------------------------- -static inline void AT91F_AIC_Trig ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id) // \arg interrupt number -{ - pAic->AIC_ISCR = (0x1 << irq_id) ; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_IsActive -//* \brief Test if an IT is active -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_AIC_IsActive ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id) // \arg Interrupt Number -{ - return (pAic->AIC_ISR & (0x1 << irq_id)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_IsPending -//* \brief Test if an IT is pending -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_AIC_IsPending ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id) // \arg Interrupt Number -{ - return (pAic->AIC_IPR & (0x1 << irq_id)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_Open -//* \brief Set exception vectors and AIC registers to default values -//*---------------------------------------------------------------------------- -static inline void AT91F_AIC_Open( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - void (*IrqHandler) (), // \arg Default IRQ vector exception - void (*FiqHandler) (), // \arg Default FIQ vector exception - void (*DefaultHandler) (), // \arg Default Handler set in ISR - void (*SpuriousHandler) (), // \arg Default Spurious Handler - unsigned int protectMode) // \arg Debug Control Register -{ - int i; - - // Disable all interrupts and set IVR to the default handler - for (i = 0; i < 32; ++i) { - AT91F_AIC_DisableIt(pAic, i); - AT91F_AIC_ConfigureIt(pAic, i, AT91C_AIC_PRIOR_LOWEST, AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE, DefaultHandler); - } - - // Set the IRQ exception vector - AT91F_AIC_SetExceptionVector((unsigned int *) 0x18, IrqHandler); - // Set the Fast Interrupt exception vector - AT91F_AIC_SetExceptionVector((unsigned int *) 0x1C, FiqHandler); - - pAic->AIC_SPU = (unsigned int) SpuriousHandler; - pAic->AIC_DCR = protectMode; -} -/* ***************************************************************************** - SOFTWARE API FOR UDP - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EnableIt -//* \brief Enable UDP IT -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_EnableIt ( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned int flag) // \arg IT to be enabled -{ - //* Write to the IER register - pUDP->UDP_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_DisableIt -//* \brief Disable UDP IT -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_DisableIt ( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned int flag) // \arg IT to be disabled -{ - //* Write to the IDR register - pUDP->UDP_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_SetAddress -//* \brief Set UDP functional address -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_SetAddress ( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char address) // \arg new UDP address -{ - pUDP->UDP_FADDR = (AT91C_UDP_FEN | address); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EnableEp -//* \brief Enable Endpoint -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_EnableEp ( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned int flag) // \arg endpoints to be enabled -{ - pUDP->UDP_GLBSTATE |= flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_DisableEp -//* \brief Enable Endpoint -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_DisableEp ( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned int flag) // \arg endpoints to be enabled -{ - pUDP->UDP_GLBSTATE &= ~(flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_SetState -//* \brief Set UDP Device state -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_SetState ( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned int flag) // \arg new UDP address -{ - pUDP->UDP_GLBSTATE &= ~(AT91C_UDP_FADDEN | AT91C_UDP_CONFG); - pUDP->UDP_GLBSTATE |= flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_GetState -//* \brief return UDP Device state -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_UDP_GetState ( // \return the UDP device state - AT91PS_UDP pUDP) // \arg pointer to a UDP controller -{ - return (pUDP->UDP_GLBSTATE & (AT91C_UDP_FADDEN | AT91C_UDP_CONFG)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_ResetEp -//* \brief Reset UDP endpoint -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_ResetEp ( // \return the UDP device state - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned int flag) // \arg Endpoints to be reset -{ - pUDP->UDP_RSTEP = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EpStall -//* \brief Endpoint will STALL requests -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_EpStall( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char endpoint) // \arg endpoint number -{ - pUDP->UDP_CSR[endpoint] |= AT91C_UDP_FORCESTALL; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EpWrite -//* \brief Write value in the DPR -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_EpWrite( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char endpoint, // \arg endpoint number - unsigned char value) // \arg value to be written in the DPR -{ - pUDP->UDP_FDR[endpoint] = value; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EpRead -//* \brief Return value from the DPR -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_UDP_EpRead( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char endpoint) // \arg endpoint number -{ - return pUDP->UDP_FDR[endpoint]; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EpEndOfWr -//* \brief Notify the UDP that values in DPR are ready to be sent -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_EpEndOfWr( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char endpoint) // \arg endpoint number -{ - pUDP->UDP_CSR[endpoint] |= AT91C_UDP_TXPKTRDY; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EpClear -//* \brief Clear flag in the endpoint CSR register -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_EpClear( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char endpoint, // \arg endpoint number - unsigned int flag) // \arg flag to be cleared -{ - pUDP->UDP_CSR[endpoint] &= ~(flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EpSet -//* \brief Set flag in the endpoint CSR register -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_EpSet( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char endpoint, // \arg endpoint number - unsigned int flag) // \arg flag to be cleared -{ - pUDP->UDP_CSR[endpoint] |= flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EpStatus -//* \brief Return the endpoint CSR register -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_UDP_EpStatus( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char endpoint) // \arg endpoint number -{ - return pUDP->UDP_CSR[endpoint]; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_GetInterruptMaskStatus -//* \brief Return UDP Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_UDP_GetInterruptMaskStatus( // \return UDP Interrupt Mask Status - AT91PS_UDP pUdp) // \arg pointer to a UDP controller -{ - return pUdp->UDP_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_IsInterruptMasked -//* \brief Test if UDP Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_UDP_IsInterruptMasked( - AT91PS_UDP pUdp, // \arg pointer to a UDP controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_UDP_GetInterruptMaskStatus(pUdp) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR ST - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_ST_SetPeriodInterval -//* \brief Set Periodic Interval Interrupt (period in ms) -//*---------------------------------------------------------------------------- -static inline void AT91F_ST_SetPeriodInterval( - AT91PS_ST pSt, - unsigned int period) -{ - volatile int status; - pSt->ST_IDR = AT91C_ST_PITS; /* Interrupt disable Register */ - - status = pSt->ST_SR; - pSt->ST_PIMR = period << 5; /* Period Interval Mode Register == timer interval = 1ms*/ -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_ST_EnableIt -//* \brief Enable system timer interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_ST_EnableIt( - AT91PS_ST pSt, - unsigned int flag) -{ - pSt->ST_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_ST_DisableIt -//* \brief Disable system timer interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_ST_DisableIt( - AT91PS_ST pSt, - unsigned int flag) -{ - pSt->ST_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_ST_GetInterruptMaskStatus -//* \brief Return ST Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_ST_GetInterruptMaskStatus( // \return ST Interrupt Mask Status - AT91PS_ST pSt) // \arg pointer to a ST controller -{ - return pSt->ST_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_ST_IsInterruptMasked -//* \brief Test if ST Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_ST_IsInterruptMasked( - AT91PS_ST pSt, // \arg pointer to a ST controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_ST_GetInterruptMaskStatus(pSt) & flag); -} -//*---------------------------------------------------------------------------- -//* \fn AT91F_EBI_CfgPIO -//* \brief Configure PIO controllers to drive EBI signals -//*---------------------------------------------------------------------------- -static inline void AT91F_EBI_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOC, // PIO controller base address - ((unsigned int) AT91C_PC8_A24 ) | - ((unsigned int) AT91C_PC7_A23 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_DBGU_CfgPMC -//* \brief Enable Peripheral clock in PMC for DBGU -//*---------------------------------------------------------------------------- -static inline void AT91F_DBGU_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SYS)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_DBGU_CfgPIO -//* \brief Configure PIO controllers to drive DBGU signals -//*---------------------------------------------------------------------------- -static inline void AT91F_DBGU_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - ((unsigned int) AT91C_PA31_DTXD ) | - ((unsigned int) AT91C_PA30_DRXD ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SYS_CfgPMC -//* \brief Enable Peripheral clock in PMC for SYS -//*---------------------------------------------------------------------------- -static inline void AT91F_SYS_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SYS)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UHP_CfgPMC -//* \brief Enable Peripheral clock in PMC for UHP -//*---------------------------------------------------------------------------- -static inline void AT91F_UHP_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_UHP)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SDRC_CfgPIO -//* \brief Configure PIO controllers to drive SDRC signals -//*---------------------------------------------------------------------------- -static inline void AT91F_SDRC_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOC, // PIO controller base address - ((unsigned int) AT91C_PC20_D20 ) | - ((unsigned int) AT91C_PC21_D21 ) | - ((unsigned int) AT91C_PC30_D30 ) | - ((unsigned int) AT91C_PC22_D22 ) | - ((unsigned int) AT91C_PC31_D31 ) | - ((unsigned int) AT91C_PC23_D23 ) | - ((unsigned int) AT91C_PC16_D16 ) | - ((unsigned int) AT91C_PC24_D24 ) | - ((unsigned int) AT91C_PC17_D17 ) | - ((unsigned int) AT91C_PC25_D25 ) | - ((unsigned int) AT91C_PC18_D18 ) | - ((unsigned int) AT91C_PC26_D26 ) | - ((unsigned int) AT91C_PC19_D19 ) | - ((unsigned int) AT91C_PC27_D27 ) | - ((unsigned int) AT91C_PC28_D28 ) | - ((unsigned int) AT91C_PC29_D29 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_EMAC_CfgPMC -//* \brief Enable Peripheral clock in PMC for EMAC -//*---------------------------------------------------------------------------- -static inline void AT91F_EMAC_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_EMAC)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_EMAC_CfgPIO -//* \brief Configure PIO controllers to drive EMAC signals -//*---------------------------------------------------------------------------- -static inline void AT91F_EMAC_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - ((unsigned int) AT91C_PA14_ERXER ) | - ((unsigned int) AT91C_PA12_ERX0 ) | - ((unsigned int) AT91C_PA13_ERX1 ) | - ((unsigned int) AT91C_PA8_ETXEN ) | - ((unsigned int) AT91C_PA16_EMDIO ) | - ((unsigned int) AT91C_PA9_ETX0 ) | - ((unsigned int) AT91C_PA10_ETX1 ) | - ((unsigned int) AT91C_PA11_ECRS_ECRSDV) | - ((unsigned int) AT91C_PA15_EMDC ) | - ((unsigned int) AT91C_PA7_ETXCK_EREFCK), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_RTC_CfgPMC -//* \brief Enable Peripheral clock in PMC for RTC -//*---------------------------------------------------------------------------- -static inline void AT91F_RTC_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SYS)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC2_CfgPMC -//* \brief Enable Peripheral clock in PMC for SSC2 -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC2_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SSC2)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC2_CfgPIO -//* \brief Configure PIO controllers to drive SSC2 signals -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC2_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOB, // PIO controller base address - ((unsigned int) AT91C_PB12_TF2 ) | - ((unsigned int) AT91C_PB17_RF2 ) | - ((unsigned int) AT91C_PB13_TK2 ) | - ((unsigned int) AT91C_PB16_RK2 ) | - ((unsigned int) AT91C_PB14_TD2 ) | - ((unsigned int) AT91C_PB15_RD2 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC1_CfgPMC -//* \brief Enable Peripheral clock in PMC for SSC1 -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC1_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SSC1)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC1_CfgPIO -//* \brief Configure PIO controllers to drive SSC1 signals -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC1_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOB, // PIO controller base address - ((unsigned int) AT91C_PB11_RF1 ) | - ((unsigned int) AT91C_PB10_RK1 ) | - ((unsigned int) AT91C_PB8_TD1 ) | - ((unsigned int) AT91C_PB9_RD1 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC0_CfgPMC -//* \brief Enable Peripheral clock in PMC for SSC0 -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC0_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SSC0)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_CfgPMC -//* \brief Enable Peripheral clock in PMC for SPI -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SPI)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_CfgPIO -//* \brief Configure PIO controllers to drive SPI signals -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - ((unsigned int) AT91C_PA3_NPCS0 ) | - ((unsigned int) AT91C_PA4_NPCS1 ) | - ((unsigned int) AT91C_PA1_MOSI ) | - ((unsigned int) AT91C_PA5_NPCS2 ) | - ((unsigned int) AT91C_PA6_NPCS3 ) | - ((unsigned int) AT91C_PA0_MISO ) | - ((unsigned int) AT91C_PA2_SPCK ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC5_CfgPMC -//* \brief Enable Peripheral clock in PMC for TC5 -//*---------------------------------------------------------------------------- -static inline void AT91F_TC5_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_TC5)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC4_CfgPMC -//* \brief Enable Peripheral clock in PMC for TC4 -//*---------------------------------------------------------------------------- -static inline void AT91F_TC4_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_TC4)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC3_CfgPMC -//* \brief Enable Peripheral clock in PMC for TC3 -//*---------------------------------------------------------------------------- -static inline void AT91F_TC3_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_TC3)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC2_CfgPMC -//* \brief Enable Peripheral clock in PMC for TC2 -//*---------------------------------------------------------------------------- -static inline void AT91F_TC2_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_TC2)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC1_CfgPMC -//* \brief Enable Peripheral clock in PMC for TC1 -//*---------------------------------------------------------------------------- -static inline void AT91F_TC1_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_TC1)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC0_CfgPMC -//* \brief Enable Peripheral clock in PMC for TC0 -//*---------------------------------------------------------------------------- -static inline void AT91F_TC0_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_TC0)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SMC2_CfgPIO -//* \brief Configure PIO controllers to drive SMC2 signals -//*---------------------------------------------------------------------------- -static inline void AT91F_SMC2_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOC, // PIO controller base address - ((unsigned int) AT91C_PC10_NCS4_CFCS) | - ((unsigned int) AT91C_PC9_A25_CFRNW) | - ((unsigned int) AT91C_PC12_NCS6_CFCE2) | - ((unsigned int) AT91C_PC11_NCS5_CFCE1), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_CfgPMC -//* \brief Enable Peripheral clock in PMC for PMC -//*---------------------------------------------------------------------------- -static inline void AT91F_PMC_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SYS)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_CfgPIO -//* \brief Configure PIO controllers to drive PMC signals -//*---------------------------------------------------------------------------- -static inline void AT91F_PMC_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - 0, // Peripheral A - ((unsigned int) AT91C_PA24_PCK1 )); // Peripheral B - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOB, // PIO controller base address - ((unsigned int) AT91C_PB27_PCK0 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIOD_CfgPMC -//* \brief Enable Peripheral clock in PMC for PIOD -//*---------------------------------------------------------------------------- -static inline void AT91F_PIOD_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_PIOD)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIOC_CfgPMC -//* \brief Enable Peripheral clock in PMC for PIOC -//*---------------------------------------------------------------------------- -static inline void AT91F_PIOC_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_PIOC)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIOB_CfgPMC -//* \brief Enable Peripheral clock in PMC for PIOB -//*---------------------------------------------------------------------------- -static inline void AT91F_PIOB_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_PIOB)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIOA_CfgPMC -//* \brief Enable Peripheral clock in PMC for PIOA -//*---------------------------------------------------------------------------- -static inline void AT91F_PIOA_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_PIOA)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TWI_CfgPMC -//* \brief Enable Peripheral clock in PMC for TWI -//*---------------------------------------------------------------------------- -static inline void AT91F_TWI_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_TWI)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TWI_CfgPIO -//* \brief Configure PIO controllers to drive TWI signals -//*---------------------------------------------------------------------------- -static inline void AT91F_TWI_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - ((unsigned int) AT91C_PA25_TWD ) | - ((unsigned int) AT91C_PA26_TWCK ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US3_CfgPMC -//* \brief Enable Peripheral clock in PMC for US3 -//*---------------------------------------------------------------------------- -static inline void AT91F_US3_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_US3)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US2_CfgPMC -//* \brief Enable Peripheral clock in PMC for US2 -//*---------------------------------------------------------------------------- -static inline void AT91F_US2_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_US2)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US2_CfgPIO -//* \brief Configure PIO controllers to drive US2 signals -//*---------------------------------------------------------------------------- -static inline void AT91F_US2_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - ((unsigned int) AT91C_PA23_TXD2 ) | - ((unsigned int) AT91C_PA22_RXD2 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US1_CfgPMC -//* \brief Enable Peripheral clock in PMC for US1 -//*---------------------------------------------------------------------------- -static inline void AT91F_US1_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_US1)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US1_CfgPIO -//* \brief Configure PIO controllers to drive US1 signals -//*---------------------------------------------------------------------------- -static inline void AT91F_US1_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOB, // PIO controller base address - ((unsigned int) AT91C_PB21_RXD1 ) | - ((unsigned int) AT91C_PB26_RTS1 ) | - ((unsigned int) AT91C_PB25_DSR1 ) | - ((unsigned int) AT91C_PB24_CTS1 ) | - ((unsigned int) AT91C_PB19_DTR1 ) | - ((unsigned int) AT91C_PB23_DCD1 ) | - ((unsigned int) AT91C_PB20_TXD1 ) | - ((unsigned int) AT91C_PB18_RI1 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US0_CfgPMC -//* \brief Enable Peripheral clock in PMC for US0 -//*---------------------------------------------------------------------------- -static inline void AT91F_US0_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_US0)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US0_CfgPIO -//* \brief Configure PIO controllers to drive US0 signals -//*---------------------------------------------------------------------------- -static inline void AT91F_US0_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - ((unsigned int) AT91C_PA17_TXD0 ) | - ((unsigned int) AT91C_PA21_RTS0 ) | - ((unsigned int) AT91C_PA19_SCK0 ) | - ((unsigned int) AT91C_PA20_CTS0 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_CfgPMC -//* \brief Enable Peripheral clock in PMC for MCI -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_MCI)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_CfgPIO -//* \brief Configure PIO controllers to drive MCI signals -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - ((unsigned int) AT91C_PA28_MCCDA ) | - ((unsigned int) AT91C_PA29_MCDA0 ) | - ((unsigned int) AT91C_PA27_MCCK ), // Peripheral A - 0); // Peripheral B - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOB, // PIO controller base address - 0, // Peripheral A - ((unsigned int) AT91C_PB5_MCDA3 ) | - ((unsigned int) AT91C_PB3_MCDA1 ) | - ((unsigned int) AT91C_PB4_MCDA2 )); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_CfgPMC -//* \brief Enable Peripheral clock in PMC for AIC -//*---------------------------------------------------------------------------- -static inline void AT91F_AIC_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_IRQ4) | - ((unsigned int) 1 << AT91C_ID_FIQ) | - ((unsigned int) 1 << AT91C_ID_IRQ5) | - ((unsigned int) 1 << AT91C_ID_IRQ6) | - ((unsigned int) 1 << AT91C_ID_IRQ0) | - ((unsigned int) 1 << AT91C_ID_IRQ1) | - ((unsigned int) 1 << AT91C_ID_IRQ2) | - ((unsigned int) 1 << AT91C_ID_IRQ3)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_CfgPMC -//* \brief Enable Peripheral clock in PMC for UDP -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_UDP)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_ST_CfgPMC -//* \brief Enable Peripheral clock in PMC for ST -//*---------------------------------------------------------------------------- -static inline void AT91F_ST_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SYS)); -} - -#endif // lib_AT91RM9200_H diff --git a/target/linux/at91/image/dfboot/src/init.c b/target/linux/at91/image/dfboot/src/init.c deleted file mode 100644 index 4088973..0000000 --- a/target/linux/at91/image/dfboot/src/init.c +++ /dev/null @@ -1,165 +0,0 @@ -//*---------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//*---------------------------------------------------------------------------- -//* The software is delivered "AS IS" without warranty or condition of any -//* kind, either express, implied or statutory. This includes without -//* limitation any warranty or condition with respect to merchantability or -//* fitness for any particular purpose, or against the infringements of -//* intellectual property rights of others. -//*---------------------------------------------------------------------------- -//* File Name : init.c -//* Object : Low level initialisations written in C -//* Creation : HIi 10/10/2003 -//* -//*---------------------------------------------------------------------------- -#include "config.h" -#include "AT91RM9200.h" -#include "lib_AT91RM9200.h" -#include "stdio.h" - -//*---------------------------------------------------------------------------- -//* \fn AT91F_DataAbort -//* \brief This function reports an Abort -//*---------------------------------------------------------------------------- -static void AT91F_SpuriousHandler() -{ - puts("ISI"); - while (1); -} - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_DataAbort -//* \brief This function reports an Abort -//*---------------------------------------------------------------------------- -static void AT91F_DataAbort() -{ - puts("IDA"); - while (1); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_FetchAbort -//* \brief This function reports an Abort -//*---------------------------------------------------------------------------- -static void AT91F_FetchAbort() -{ - puts("IFA"); - while (1); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UndefHandler -//* \brief This function reports that no handler have been set for current IT -//*---------------------------------------------------------------------------- -static void AT91F_UndefHandler() -{ - puts("IUD"); - while (1); -} - - -//*-------------------------------------------------------------------------------------- -//* Function Name : AT91F_InitSdram -//* Object : Initialize the SDRAM -//* Input Parameters : -//* Output Parameters : -//*-------------------------------------------------------------------------------------- -static void AT91F_InitSdram() -{ - int *pRegister; - - //* Configure PIOC as peripheral (D16/D31) - - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOC, // PIO controller base address - 0xFFFF0030, - 0 - ); - - //*Init SDRAM - pRegister = (int *)0xFFFFFF98; - *pRegister = 0x2188c155; - pRegister = (int *)0xFFFFFF90; - *pRegister = 0x2; - pRegister = (int *)0x20000000; - *pRegister = 0; - pRegister = (int *)0xFFFFFF90; - *pRegister = 0x4; - pRegister = (int *)0x20000000; - *pRegister = 0; - *pRegister = 0; - *pRegister = 0; - *pRegister = 0; - *pRegister = 0; - *pRegister = 0; - *pRegister = 0; - *pRegister = 0; - pRegister = (int *)0xFFFFFF90; - *pRegister = 0x3; - pRegister = (int *)0x20000080; - *pRegister = 0; - - pRegister = (int *)0xFFFFFF94; - *pRegister = 0x2e0; - pRegister = (int *)0x20000000; - *pRegister = 0; - - pRegister = (int *)0xFFFFFF90; - *pRegister = 0x00; - pRegister = (int *)0x20000000; - *pRegister = 0; -} - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_InitFlash -//* \brief This function performs low level HW initialization -//*---------------------------------------------------------------------------- -static void AT91F_InitMemories() -{ - int *pEbi = (int *)0xFFFFFF60; - - //* Setup MEMC to support all connected memories (CS0 = FLASH; CS1=SDRAM) - pEbi = (int *)0xFFFFFF60; - *pEbi = 0x00000002; - - //* CS0 cs for flash - pEbi = (int *)0xFFFFFF70; - *pEbi = 0x00003284; - - AT91F_InitSdram(); -} - - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_LowLevelInit -//* \brief This function performs very low level HW initialization -//*---------------------------------------------------------------------------- -void AT91F_LowLevelInit(void) -{ - int i; - - // Init Interrupt Controller - AT91F_AIC_Open( - AT91C_BASE_AIC, // pointer to the AIC registers - AT91C_AIC_BRANCH_OPCODE, // IRQ exception vector - AT91F_UndefHandler, // FIQ exception vector - AT91F_UndefHandler, // AIC default handler - AT91F_SpuriousHandler, // AIC spurious handler - 0); // Protect mode - - // Perform 8 End Of Interrupt Command to make sýre AIC will not Lock out nIRQ - for(i=0; i<8; i++) - AT91F_AIC_AcknowledgeIt(AT91C_BASE_AIC); - - AT91F_AIC_SetExceptionVector((unsigned int *)0x0C, AT91F_FetchAbort); - AT91F_AIC_SetExceptionVector((unsigned int *)0x10, AT91F_DataAbort); - AT91F_AIC_SetExceptionVector((unsigned int *)0x4, AT91F_UndefHandler); - - //Initialize SDRAM and Flash - AT91F_InitMemories(); - -} - diff --git a/target/linux/at91/image/dfboot/src/jump.S b/target/linux/at91/image/dfboot/src/jump.S deleted file mode 100644 index cc69311..0000000 --- a/target/linux/at91/image/dfboot/src/jump.S +++ /dev/null @@ -1,4 +0,0 @@ -.global Jump - -Jump: mov pc, r0 - diff --git a/target/linux/at91/image/dfboot/src/led.c b/target/linux/at91/image/dfboot/src/led.c deleted file mode 100644 index 40d4911..0000000 --- a/target/linux/at91/image/dfboot/src/led.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * (C) Copyright 2006 - * Atmel Nordic AB <www.atmel.com> - * Ulf Samuelsson <ulf@atmel.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <AT91RM9200.h> - -#define GREEN_LED AT91C_PIO_PB0 -#define YELLOW_LED AT91C_PIO_PB1 -#define RED_LED AT91C_PIO_PB2 - -void LED_set(unsigned int led) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_SODR = (led ^ 0x7) & 0x7; // All 0's => Set PIO high => OFF - PIOB->PIO_CODR = led & 0x7; // All 1's => Set PIO low => ON -} - -void green_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; -// PIOB->PIO_CODR = GREEN_LED; - PIOB->PIO_CODR = (1 << 0); -} - -void yellow_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; -// PIOB->PIO_CODR = YELLOW_LED; - PIOB->PIO_CODR = (1 << 1); -} - -void red_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; -// PIOB->PIO_CODR = RED_LED; - PIOB->PIO_CODR = (1 << 2); -} - -void green_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; -// PIOB->PIO_SODR = GREEN_LED; - PIOB->PIO_SODR = (1 << 0); -} - -void yellow_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; -// PIOB->PIO_SODR = YELLOW_LED; - PIOB->PIO_SODR = (1 << 1); -} - -void red_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; -// PIOB->PIO_SODR = RED_LED; - PIOB->PIO_SODR = (1 << 2); -} - -void LED_blink(unsigned int led) -{ - volatile int i,j; - for(i = 0; i < 5; i++) { - LED_set((1 << led)&0x7); - for(j= 0; j < 200000; j++); - LED_set(0); - for(j= 0; j < 200000; j++); - } -} - - -void LED_init (void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - AT91PS_PMC PMC = AT91C_BASE_PMC; - PMC->PMC_PCER = (1 << AT91C_ID_PIOB); // Enable PIOB clock - // Disable peripherals on LEDs - PIOB->PIO_PER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; - // Enable pins as outputs - PIOB->PIO_OER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; - // Turn all LEDs OFF - PIOB->PIO_SODR = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; -} diff --git a/target/linux/at91/image/dfboot/src/main.c b/target/linux/at91/image/dfboot/src/main.c deleted file mode 100644 index c0705de..0000000 --- a/target/linux/at91/image/dfboot/src/main.c +++ /dev/null @@ -1,811 +0,0 @@ -/*---------------------------------------------------------------------------- - * ATMEL Microcontroller Software Support - ROUSSET - - *---------------------------------------------------------------------------- - * The software is delivered "AS IS" without warranty or condition of any - * kind, either express, implied or statutory. This includes without - * limitation any warranty or condition with respect to merchantability or - * fitness for any particular purpose, or against the infringements of - * intellectual property rights of others. - *---------------------------------------------------------------------------- - * File Name : main.c - * Object : - * Creation : HIi 10/10/2003 - * Modif : HIi 15/06/2004 : add crc32 to verify the download - * from dataflash - * : HIi 21/09/2004 : Set first PLLA to 180Mhz and MCK to - * 60Mhz to speed up dataflash boot (15Mhz) - * : MLC 12/04/2005 : Modify SetPLL() to avoid errata - * : USA 30/12/2005 : Change to page Size 1056 - * Change startaddress to C0008400 - * Change SPI Speed to ~4 Mhz - * Add retry on CRC Error - *---------------------------------------------------------------------------- - */ -#include "config.h" -#include "stdio.h" -#include "AT91RM9200.h" -#include "lib_AT91RM9200.h" -#include "com.h" -#include "main.h" -#include "dataflash.h" -#include "AT91C_MCI_Device.h" - -#define DEBUGOUT -#define XMODEM -#define MEMDISP - -#ifdef PAGESZ_1056 -#define PAGESIZE 1056 -#else -#define PAGESIZE 1024 -#endif - -#define AT91C_SDRAM_START 0x20000000 -#define AT91C_BOOT_ADDR 0x21F00000 -#define AT91C_BOOT_SIZE 128*PAGESIZE -#ifdef PAGESZ_1056 -#define AT91C_BOOT_DATAFLASH_ADDR 0xC0008400 -#else -#define AT91C_BOOT_DATAFLASH_ADDR 0xC0008000 -#endif -#define AT91C_PLLA_VALUE 0x237A3E5A // crystal= 18.432MHz - fixes BRG error at 115kbps -//#define AT91C_PLLA_VALUE 0x2026BE04 // crystal= 18.432MHz -//#define AT91C_PLLA_VALUE 0x202CBE01 // crystal= 4MHz - - - -#define DISP_LINE_LEN 16 - -// Reason for boot failure -#define IMAGE_BAD_SIZE 0 -#define IMAGE_READ_FAILURE 1 -#define IMAGE_CRC_ERROR 2 -#define IMAGE_ERROR 3 -#define SUCCESS -1 - -/* prototypes*/ -extern void AT91F_ST_ASM_HANDLER(void); -extern void Jump(unsigned int addr); - -const char *menu_dataflash[] = { -#ifdef XMODEM - "1: P DFboot\n", - "2: P U-Boot\n", -#endif - "3: P SDCard\n", -#ifdef PAGESZ_1056 - "4: R UBOOT\n", -#else - "4: R UBOOT\n", -#endif -#ifdef XMODEM - "5: P DF [addr]\n", -#endif - "6: RD DF [addr]\n", - "7: E DF\n" -}; -#ifdef XMODEM -#define MAXMENU 7 -#else -#define MAXMENU 4 -#endif - -char message[20]; -#ifdef XMODEM -volatile char XmodemComplete = 0; -#endif -unsigned int StTick = 0; - -AT91S_RomBoot const *pAT91; -#ifdef XMODEM -AT91S_SBuffer sXmBuffer; -AT91S_SvcXmodem svcXmodem; -AT91S_Pipe xmodemPipe; -#endif -AT91S_CtlTempo ctlTempo; - - -//*-------------------------------------------------------------------------------------- -//* Function Name : GetTickCount() -//* Object : Return the number of systimer tick -//* Input Parameters : -//* Output Parameters : -//*-------------------------------------------------------------------------------------- -unsigned int GetTickCount(void) -{ - return StTick; -} - -#ifdef XMODEM -//*-------------------------------------------------------------------------------------- -//* Function Name : AT91_XmodemComplete() -//* Object : Perform the remap and jump to appli in RAM -//* Input Parameters : -//* Output Parameters : -//*-------------------------------------------------------------------------------------- -static void AT91_XmodemComplete(AT91S_PipeStatus status, void *pVoid) -{ - /* stop the Xmodem tempo */ - svcXmodem.tempo.Stop(&(svcXmodem.tempo)); - XmodemComplete = 1; -} - - -//*-------------------------------------------------------------------------------------- -//* Function Name : AT91F_XmodemProtocol(AT91S_PipeStatus status, void *pVoid) -//* Object : Xmodem dispatcher -//* Input Parameters : -//* Output Parameters : -//*-------------------------------------------------------------------------------------- -static void XmodemProtocol(AT91S_PipeStatus status, void *pVoid) -{ - AT91PS_SBuffer pSBuffer = (AT91PS_SBuffer) xmodemPipe.pBuffer->pChild; - AT91PS_USART pUsart = svcXmodem.pUsart; - - if (pSBuffer->szRdBuffer == 0) { - /* Start a tempo to wait the Xmodem protocol complete */ - svcXmodem.tempo.Start(&(svcXmodem.tempo), 10, 0, AT91_XmodemComplete, pUsart); - } -} -#endif - -//*-------------------------------------------------------------------------------------- -//* Function Name : irq1_c_handler() -//* Object : C Interrupt handler for Interrutp source 1 -//* Input Parameters : none -//* Output Parameters : none -//*-------------------------------------------------------------------------------------- -void AT91F_ST_HANDLER(void) -{ - volatile unsigned int csr = *AT91C_DBGU_CSR; -#ifdef XMODEM - unsigned int error; -#endif - - if (AT91C_BASE_ST->ST_SR & 0x01) { - StTick++; - ctlTempo.CtlTempoTick(&ctlTempo); - return; - } - -#ifdef XMODEM - error = AT91F_US_Error((AT91PS_USART)AT91C_BASE_DBGU); - if (csr & error) { - /* Stop previous Xmodem transmition*/ - *(AT91C_DBGU_CR) = AT91C_US_RSTSTA; - AT91F_US_DisableIt((AT91PS_USART)AT91C_BASE_DBGU, AT91C_US_ENDRX); - AT91F_US_EnableIt((AT91PS_USART)AT91C_BASE_DBGU, AT91C_US_RXRDY); - - } - - else if (csr & (AT91C_US_TXRDY | AT91C_US_ENDTX | AT91C_US_TXEMPTY | - AT91C_US_RXRDY | AT91C_US_ENDRX | AT91C_US_TIMEOUT | - AT91C_US_RXBUFF)) { - if ( !(svcXmodem.eot) ) - svcXmodem.Handler(&svcXmodem, csr); - } -#endif -} - - -//*----------------------------------------------------------------------------- -//* Function Name : AT91F_DisplayMenu() -//* Object : -//* Input Parameters : -//* Return value : -//*----------------------------------------------------------------------------- -static int AT91F_DisplayMenu(void) -{ - int i, mci_present = 0; - printf("\nDF LOADER %s %s %s\n",AT91C_VERSION,__DATE__,__TIME__); - AT91F_DataflashPrintInfo(); - mci_present = AT91F_MCI_Init(); - for(i = 0; i < MAXMENU; i++) { - puts(menu_dataflash[i]); - } - return mci_present; -} - - -//*----------------------------------------------------------------------------- -//* Function Name : AsciiToHex() -//* Object : ascii to hexa conversion -//* Input Parameters : -//* Return value : -//*----------------------------------------------------------------------------- -static unsigned int AsciiToHex(char *s, unsigned int *val) -{ - int n; - - *val=0; - - if(s[0] == '0' && ((s[1] == 'x') || (s[1] == 'X'))) - s+=2; - n = 0; - while((n < 8) && (s[n] !=0)) - { - *val <<= 4; - if ( (s[n] >= '0') && (s[n] <='9')) - *val += (s[n] - '0'); - else - if ((s[n] >= 'a') && (s[n] <='f')) - *val += (s[n] - 0x57); - else - if ((s[n] >= 'A') && (s[n] <='F')) - *val += (s[n] - 0x37); - else - return 0; - n++; - } - - return 1; -} - - -#ifdef MEMDISP -//*----------------------------------------------------------------------------- -//* Function Name : AT91F_MemoryDisplay() -//* Object : Display the content of the dataflash -//* Input Parameters : -//* Return value : -//*----------------------------------------------------------------------------- -static int AT91F_MemoryDisplay(unsigned int addr, unsigned int length) -{ - unsigned long i, nbytes, linebytes; - char *cp; -// unsigned int *uip; -// unsigned short *usp; - unsigned char *ucp; - char linebuf[DISP_LINE_LEN]; - -// nbytes = length * size; - nbytes = length; - do - { -// uip = (unsigned int *)linebuf; -// usp = (unsigned short *)linebuf; - ucp = (unsigned char *)linebuf; - - printf("%08x:", addr); - linebytes = (nbytes > DISP_LINE_LEN)?DISP_LINE_LEN:nbytes; - if((addr & 0xF0000000) == 0x20000000) { - for(i = 0; i < linebytes; i ++) { - linebuf[i] = *(char *)(addr+i); - } - } else { - read_dataflash(addr, linebytes, linebuf); - } - for (i=0; i<linebytes; i++) - { -/* if (size == 4) - printf(" %08x", *uip++); - else if (size == 2) - printf(" %04x", *usp++); - else -*/ - printf(" %02x", *ucp++); -// addr += size; - addr++; - } - printf(" "); - cp = linebuf; - for (i=0; i<linebytes; i++) { - if ((*cp < 0x20) || (*cp > 0x7e)) - printf("."); - else - printf("%c", *cp); - cp++; - } - printf("\n"); - nbytes -= linebytes; - } while (nbytes > 0); - return 0; -} -#endif - -//*-------------------------------------------------------------------------------------- -//* Function Name : AT91F_SetPLL -//* Object : Set the PLLA to 180Mhz and Master clock to 60 Mhz -//* Input Parameters : -//* Output Parameters : -//*-------------------------------------------------------------------------------------- -static unsigned int AT91F_SetPLL(void) -{ - AT91_REG tmp; - AT91PS_PMC pPmc = AT91C_BASE_PMC; - AT91PS_CKGR pCkgr = AT91C_BASE_CKGR; - - pPmc->PMC_IDR = 0xFFFFFFFF; - - /* -Setup the PLL A */ - pCkgr->CKGR_PLLAR = AT91C_PLLA_VALUE; - - while (!(*AT91C_PMC_SR & AT91C_PMC_LOCKA)); - - /* - Switch Master Clock from PLLB to PLLA/3 */ - tmp = pPmc->PMC_MCKR; - /* See Atmel Errata #27 and #28 */ - if (tmp & 0x0000001C) { - tmp = (tmp & ~0x0000001C); - pPmc->PMC_MCKR = tmp; - while (!(*AT91C_PMC_SR & AT91C_PMC_MCKRDY)); - } - if (tmp != 0x00000202) { - pPmc->PMC_MCKR = 0x00000202; - if ((tmp & 0x00000003) != 0x00000002) - while (!(*AT91C_PMC_SR & AT91C_PMC_MCKRDY)); - } - - return 1; -} - - -//*-------------------------------------------------------------------------------------- -//* Function Name : AT91F_ResetRegisters -//* Object : Restore the initial state to registers -//* Input Parameters : -//* Output Parameters : -//*-------------------------------------------------------------------------------------- -static unsigned int AT91F_ResetRegisters(void) -{ - volatile int i = 0; - - /* set the PIOs in input*/ - /* This disables the UART output, so dont execute for now*/ - -#ifndef DEBUGOUT - *AT91C_PIOA_ODR = 0xFFFFFFFF; /* Disables all the output pins */ - *AT91C_PIOA_PER = 0xFFFFFFFF; /* Enables the PIO to control all the pins */ -#endif - - AT91F_AIC_DisableIt (AT91C_BASE_AIC, AT91C_ID_SYS); - /* close all peripheral clocks */ - -#ifndef DEBUGOUT - AT91C_BASE_PMC->PMC_PCDR = 0xFFFFFFFC; -#endif - /* Disable core interrupts and set supervisor mode */ - __asm__ ("msr CPSR_c, #0xDF"); //* ARM_MODE_SYS(0x1F) | I_BIT(0x80) | F_BIT(0x40) - /* Clear all the interrupts */ - *AT91C_AIC_ICCR = 0xffffffff; - - /* read the AIC_IVR and AIC_FVR */ - i = *AT91C_AIC_IVR; - i = *AT91C_AIC_FVR; - - /* write the end of interrupt control register */ - *AT91C_AIC_EOICR = 0; - - return 1; -} - - -static int AT91F_LoadBoot(void) -{ -// volatile unsigned int crc1 = 0, crc2 = 0; - volatile unsigned int SizeToDownload = 0x21400; - volatile unsigned int AddressToDownload = AT91C_BOOT_ADDR; - -#if 0 - /* Read vector 6 to extract size to load */ - if (read_dataflash(AT91C_BOOT_DATAFLASH_ADDR, 32, - (char *)AddressToDownload) != AT91C_DATAFLASH_OK) - { - printf("Bad Code Size\n"); - return IMAGE_BAD_SIZE; - } - /* calculate the size to download */ - SizeToDownload = *(int *)(AddressToDownload + AT91C_OFFSET_VECT6); -#endif - -// printf("\nLoad UBOOT from dataflash[%x] to SDRAM[%x]\n", -// AT91C_BOOT_DATAFLASH_ADDR, AT91C_BOOT_ADDR); - if (read_dataflash(AT91C_BOOT_DATAFLASH_ADDR, SizeToDownload + 8, - (char *)AddressToDownload) != AT91C_DATAFLASH_OK) - { - printf("F DF RD\n"); - return IMAGE_READ_FAILURE; - } -#if 0 - pAT91->CRC32((const unsigned char *)AT91C_BOOT_ADDR, - (unsigned int)SizeToDownload , (unsigned int *)&crc2); - crc1 = (int)(*(char *)(AddressToDownload + SizeToDownload)) + - (int)(*(char *)(AddressToDownload + SizeToDownload + 1) << 8) + - (int)(*(char *)(AddressToDownload + SizeToDownload + 2) << 16) + - (int)(*(char *)(AddressToDownload + SizeToDownload + 3) << 24); - - /* Restore the value of Vector 6 */ - *(int *)(AddressToDownload + AT91C_OFFSET_VECT6) = - *(int *)(AddressToDownload + SizeToDownload + 4); - - if (crc1 != crc2) { - printf("DF CRC bad %x != %x\n",crc1,crc2); - return IMAGE_CRC_ERROR; - } -#endif - return SUCCESS; -} - -static int AT91F_StartBoot(void) -{ - int sts; - if((sts = AT91F_LoadBoot()) != SUCCESS) return sts; -// printf("\n"); -// printf("PLLA[180MHz], MCK[60Mhz] ==> Start UBOOT\n"); - if (AT91F_ResetRegisters()) - { - printf("Jump"); - Jump(AT91C_BOOT_ADDR); -// LED_blink(0); - } - return IMAGE_ERROR; -} - -#if 0 -static void AT91F_RepeatedStartBoot(void) -{ - int i; - for(i = 0; i < CRC_RETRIES; i++) { - if(AT91F_StartBoot() != IMAGE_CRC_ERROR){ -// LED_blink(1); - return; - } - } - return; -} -#endif - -#define TRUE 1 -#define FALSE 0 -#define TRX_MAGIC 0x30524448 /* "HDR0" */ -#define TRX_VERSION 1 - -struct trx_header { - unsigned int magic; - unsigned int len; - unsigned int crc32; - unsigned int flag_version; - unsigned int offsets[3]; -}; - -#define AT91C_MCI_TIMEOUT 1000000 - -extern AT91S_MciDevice MCI_Device; -extern void AT91F_MCIDeviceWaitReady(unsigned int); -extern int AT91F_MCI_ReadBlockSwab(AT91PS_MciDevice, int, unsigned int *, int); - -int Program_From_MCI(void) -{ - int i; - unsigned int Max_Read_DataBlock_Length; - int block = 0; - int buffer = AT91C_DOWNLOAD_BASE_ADDRESS; - int bufpos = AT91C_DOWNLOAD_BASE_ADDRESS; - int NbPage = 0; - struct trx_header *p; - - p = (struct trx_header *)bufpos; - - Max_Read_DataBlock_Length = MCI_Device.pMCI_DeviceFeatures->Max_Read_DataBlock_Length; - - AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT); - - AT91F_MCI_ReadBlockSwab(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length); - - if (p->magic != TRX_MAGIC) { - printf("Inv IMG 0x%08x\n", p->magic); - return FALSE; - } - - printf("RDSD"); - AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15 | AT91C_PIO_PC8 | AT91C_PIO_PC14; - for (i=0; i<(p->len/512); i++) { - AT91F_MCI_ReadBlockSwab(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length); - block++; - bufpos += Max_Read_DataBlock_Length; - } - - NbPage = 0; - i = dataflash_info[0].Device.pages_number; - while(i >>= 1) - NbPage++; - i = ((p->offsets[1] - p->offsets[0])/ 512) + 1 + (NbPage << 13) + (dataflash_info[0].Device.pages_size << 17); - *(int *)(buffer + p->offsets[0] + AT91C_OFFSET_VECT6) = i; - - printf(" WDFB"); - AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15 | AT91C_PIO_PC14; - AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC8; - write_dataflash(0xc0000000, buffer + p->offsets[0], p->offsets[1] - p->offsets[0]); - printf(" WUB"); - AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15; - AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC8 | AT91C_PIO_PC14; - write_dataflash(0xc0008000, buffer + p->offsets[1], p->offsets[2] - p->offsets[1]); - printf(" WKRFS"); - AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC8 | AT91C_PIO_PC15; - AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC7 | AT91C_PIO_PC14; - write_dataflash(0xc0042000, buffer + p->offsets[2], p->len - p->offsets[2]); - AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC8 | AT91C_PIO_PC14; - AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC7 | AT91C_PIO_PC15; - return TRUE; -} - -//*---------------------------------------------------------------------------- -//* Function Name : main -//* Object : Main function -//* Input Parameters : none -//* Output Parameters : True -//*---------------------------------------------------------------------------- -int main(void) -{ -#ifdef XMODEM - AT91PS_Buffer pXmBuffer; - AT91PS_SvcComm pSvcXmodem; -#endif - AT91S_SvcTempo svcBootTempo; // Link to a AT91S_Tempo object - unsigned int ix; - volatile unsigned int AddressToDownload, SizeToDownload; - unsigned int DeviceAddress = 0; - char command = 0; -#ifdef XMODEM - volatile int i = 0; - unsigned int crc1 = 0, crc2 = 0; - volatile int device; - int NbPage; -#endif - volatile int Nb_Device = 0; - int mci_present = 0; - - pAT91 = AT91C_ROM_BOOT_ADDRESS; - - if (!AT91F_SetPLL()) - { - printf("F SetPLL"); - while(1); - } - - at91_init_uarts(); - - /* Tempo Initialisation */ - pAT91->OpenCtlTempo(&ctlTempo, (void *) &(pAT91->SYSTIMER_DESC)); - ctlTempo.CtlTempoStart((void *) &(pAT91->SYSTIMER_DESC)); - - // Attach the tempo to a tempo controler - ctlTempo.CtlTempoCreate(&ctlTempo, &svcBootTempo); -// LED_init(); -// LED_blink(2); - -#ifdef XMODEM - /* Xmodem Initialisation */ - pXmBuffer = pAT91->OpenSBuffer(&sXmBuffer); - pSvcXmodem = pAT91->OpenSvcXmodem(&svcXmodem, - (AT91PS_USART)AT91C_BASE_DBGU, &ctlTempo); - pAT91->OpenPipe(&xmodemPipe, pSvcXmodem, pXmBuffer); -#endif - - /* System Timer initialization */ - AT91F_AIC_ConfigureIt( - AT91C_BASE_AIC, // AIC base address - AT91C_ID_SYS, // System peripheral ID - AT91C_AIC_PRIOR_HIGHEST, // Max priority - AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE, // Level sensitive - AT91F_ST_ASM_HANDLER - ); - /* Enable ST interrupt */ - AT91F_AIC_EnableIt(AT91C_BASE_AIC, AT91C_ID_SYS); - -#ifndef PRODTEST - /* Start tempo to start Boot in a delay of - * AT91C_DELAY_TO_BOOT sec if no key pressed */ - svcBootTempo.Start(&svcBootTempo, AT91C_DELAY_TO_BOOT, - 0, AT91F_StartBoot, NULL); -#endif - - while(1) - { - while(command == 0) - { - AddressToDownload = AT91C_DOWNLOAD_BASE_ADDRESS; - SizeToDownload = AT91C_DOWNLOAD_MAX_SIZE; - DeviceAddress = 0; - - /* try to detect Dataflash */ - if (!Nb_Device) - Nb_Device = AT91F_DataflashInit(); - - mci_present = AT91F_DisplayMenu(); - -#ifdef PRODTEST - if (mci_present) { - if (Program_From_MCI()) - AT91F_StartBoot(); - } -#endif - - message[0] = 0; - AT91F_ReadLine ("Enter: ", message); - -#ifndef PRODTEST - /* stop tempo ==> stop autoboot */ - svcBootTempo.Stop(&svcBootTempo); -#endif - - command = message[0]; - for(ix = 1; (message[ix] == ' ') && (ix < 12); ix++); // Skip some whitespace - - if(!AsciiToHex(&message[ix], &DeviceAddress) ) - DeviceAddress = 0; // Illegal DeviceAddress - - switch(command) - { -#ifdef XMODEM - case '1': - case '2': - case '5': - if(command == '1') { - DeviceAddress = 0xC0000000; -// printf("Download DataflashBoot.bin to [0x%x]\n", DeviceAddress); - } else if(command == '2') { - DeviceAddress = AT91C_BOOT_DATAFLASH_ADDR; -// printf("Download u-boot.bin to [0x%x]\n", DeviceAddress); - } else { -// printf("Download Dataflash to [0x%x]\n", DeviceAddress); - } - switch(DeviceAddress & 0xFF000000) - { - case CFG_DATAFLASH_LOGIC_ADDR_CS0: - if (dataflash_info[0].id == 0){ - printf("No DF"); - AT91F_WaitKeyPressed(); - command = 0; - } - - device = 0; - break; - - case CFG_DATAFLASH_LOGIC_ADDR_CS3: - if (dataflash_info[1].id == 0){ - printf("No DF"); - AT91F_WaitKeyPressed(); - command = 0; - } - device = 1; - break; - - default: - command = 0; - break; - } - break; -#endif - - case '3': - if (mci_present) - Program_From_MCI(); - command = 0; - break; - - case '4': - AT91F_StartBoot(); - command = 0; - break; - -#ifdef MEMDISP - case '6': - do - { - AT91F_MemoryDisplay(DeviceAddress, 256); - AT91F_ReadLine (NULL, message); - DeviceAddress += 0x100; - } - while(message[0] == '\0'); - command = 0; - break; -#endif - - case '7': - switch(DeviceAddress & 0xFF000000) - { - case CFG_DATAFLASH_LOGIC_ADDR_CS0: - break; - case CFG_DATAFLASH_LOGIC_ADDR_CS3: - break; - default: - command = 0; - break; - } - - if (command != 0) { - AT91F_ReadLine ("RDY ERA\nSure?", - message); - if(message[0] == 'Y' || message[0] == 'y') { - erase_dataflash(DeviceAddress & 0xFF000000); -// printf("Erase complete\n\n"); - } -// else -// printf("Erase aborted\n"); - } - command = 0; - - break; - - default: - command = 0; - break; - } - } -#ifdef XMODEM - for(i = 0; i <= AT91C_DOWNLOAD_MAX_SIZE; i++) - *(unsigned char *)(AddressToDownload + i) = 0; - - xmodemPipe.Read(&xmodemPipe, (char *)AddressToDownload, - SizeToDownload, XmodemProtocol, 0); - while(XmodemComplete !=1); - SizeToDownload = (unsigned int)((svcXmodem.pData) - - (unsigned int)AddressToDownload); - - /* Modification of vector 6 */ - if ((DeviceAddress == CFG_DATAFLASH_LOGIC_ADDR_CS0)) { - // Vector 6 must be compliant to the BootRom description (ref Datasheet) - NbPage = 0; - i = dataflash_info[device].Device.pages_number; - while(i >>= 1) - NbPage++; - i = (SizeToDownload / 512)+1 + (NbPage << 13) + - (dataflash_info[device].Device.pages_size << 17); //+4 to add crc32 - SizeToDownload = 512 * (i &0xFF); - } - else - { - /* Save the contents of vector 6 ==> will be restored - * at boot time (AT91F_StartBoot) */ - *(int *)(AddressToDownload + SizeToDownload + 4) = - *(int *)(AddressToDownload + AT91C_OFFSET_VECT6); - /* Modify Vector 6 to contain the size of the - * file to copy (Dataflash -> SDRAM)*/ - i = SizeToDownload; - } - - *(int *)(AddressToDownload + AT91C_OFFSET_VECT6) = i; -// printf("\nModification of Arm Vector 6 :%x\n", i); - -// printf("\nWrite %d bytes in DataFlash [0x%x]\n",SizeToDownload, DeviceAddress); - crc1 = 0; - pAT91->CRC32((const unsigned char *)AddressToDownload, SizeToDownload , &crc1); - - /* Add the crc32 at the end of the code */ - *(char *)(AddressToDownload + SizeToDownload) = (char)(crc1 & 0x000000FF); - *(char *)(AddressToDownload + SizeToDownload + 1) = (char)((crc1 & 0x0000FF00) >> 8); - *(char *)(AddressToDownload + SizeToDownload + 2) = (char)((crc1 & 0x00FF0000) >> 16); - *(char *)(AddressToDownload + SizeToDownload + 3) = (char)((crc1 & 0xFF000000) >> 24); - - /* write dataflash */ - write_dataflash (DeviceAddress, AddressToDownload, (SizeToDownload + 8)); - - /* clear the buffer before read */ - for(i=0; i <= SizeToDownload; i++) - *(unsigned char *)(AddressToDownload + i) = 0; - - /* Read dataflash to check the validity of the data */ - read_dataflash (DeviceAddress, (SizeToDownload + 4), (char *)(AddressToDownload)); - - printf("VFY: "); - crc2 = 0; - - pAT91->CRC32((const unsigned char *)AddressToDownload, SizeToDownload , &crc2); - crc1 = (int)(*(char *)(AddressToDownload + SizeToDownload)) + - (int)(*(char *)(AddressToDownload + SizeToDownload + 1) << 8) + - (int)(*(char *)(AddressToDownload + SizeToDownload + 2) << 16) + - (int)(*(char *)(AddressToDownload + SizeToDownload + 3) << 24); - - if (crc1 != crc2) - printf("ERR"); - else - printf("OK"); - - command = 0; - XmodemComplete = 0; - AT91F_WaitKeyPressed(); -#endif - } -} - diff --git a/target/linux/at91/image/dfboot/src/main.h b/target/linux/at91/image/dfboot/src/main.h deleted file mode 100644 index a8cd325..0000000 --- a/target/linux/at91/image/dfboot/src/main.h +++ /dev/null @@ -1,43 +0,0 @@ -//*---------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//*---------------------------------------------------------------------------- -//* The software is delivered "AS IS" without warranty or condition of any -//* kind, either express, implied or statutory. This includes without -//* limitation any warranty or condition with respect to merchantability or -//* fitness for any particular purpose, or against the infringements of -//* intellectual property rights of others. -//*---------------------------------------------------------------------------- -//* File Name : main.h -//* Object : -//* -//* 1.0 27/03/03 HIi : Creation -//* 1.01 03/05/04 HIi : AT9C_VERSION incremented to 1.01 -//* 1.02 15/06/04 HIi : AT9C_VERSION incremented to 1.02 ==> -//* Add crc32 to verify dataflash download -//* 1.03 18/04/05 MLC : AT91C_VERSION incremented to 1.03g -//* Repeat boot on CRC Failure -//* Change Page Size to 1056 -//* Reduce SPI speed to 4 Mbit -//* Change U-Boot boot address to a 1056 byte page boundary -//* 1.04 30/04/05 USA : AT91C_VERSION incremented to 1.04 -//* 1.05 07/08/06 USA : AT91C_VERSION incremented to 1.05 -//* Will only support loading Dataflashboot.bin and U-Boot -//*---------------------------------------------------------------------------- - -#ifndef main_h -#define main_h - -#include "embedded_services.h" - -#define AT91C_DOWNLOAD_BASE_ADDRESS 0x20000000 -#define AT91C_DOWNLOAD_MAX_SIZE 0x00040000 - -#define AT91C_OFFSET_VECT6 0x14 //* Offset for ARM vector 6 - -#define AT91C_VERSION "VER 1.05" - - -// Global variables and functions definition -extern unsigned int GetTickCount(void); -#endif - diff --git a/target/linux/at91/image/dfboot/src/mci_device.c b/target/linux/at91/image/dfboot/src/mci_device.c deleted file mode 100644 index cce74a3..0000000 --- a/target/linux/at91/image/dfboot/src/mci_device.c +++ /dev/null @@ -1,743 +0,0 @@ -//*---------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//*---------------------------------------------------------------------------- -//* The software is delivered "AS IS" without warranty or condition of any -//* kind, either express, implied or statutory. This includes without -//* limitation any warranty or condition with respect to merchantability or -//* fitness for any particular purpose, or against the infringements of -//* intellectual property rights of others. -//*---------------------------------------------------------------------------- -//* File Name : mci_device.c -//* Object : TEST DataFlash Functions -//* Creation : FB 26/11/2002 -//* -//*---------------------------------------------------------------------------- - -#include <AT91C_MCI_Device.h> -#include "stdio.h" - -#define AT91C_MCI_TIMEOUT 1000000 /* For AT91F_MCIDeviceWaitReady */ -#define BUFFER_SIZE_MCI_DEVICE 512 -#define MASTER_CLOCK 60000000 -#define FALSE 0 -#define TRUE 1 - -//* External Functions -extern void AT91F_ASM_MCI_Handler(void); -//* Global Variables -AT91S_MciDeviceFeatures MCI_Device_Features; -AT91S_MciDeviceDesc MCI_Device_Desc; -AT91S_MciDevice MCI_Device; - -#undef ENABLE_WRITE -#undef MMC - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_SendCommand -//* \brief Generic function to send a command to the MMC or SDCard -//*---------------------------------------------------------------------------- -int AT91F_MCI_SendCommand ( - AT91PS_MciDevice pMCI_Device, - unsigned int Cmd, - unsigned int Arg) -{ - unsigned int error,status; - //unsigned int tick=0; - - // Send the command - AT91C_BASE_MCI->MCI_ARGR = Arg; - AT91C_BASE_MCI->MCI_CMDR = Cmd; - - // wait for CMDRDY Status flag to read the response - do - { - status = AT91C_BASE_MCI->MCI_SR; - //tick++; - } - while( !(status & AT91C_MCI_CMDRDY) );//&& (tick<100) ); - - // Test error ==> if crc error and response R3 ==> don't check error - error = (AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR; - if(error != 0 ) - { - // if the command is SEND_OP_COND the CRC error flag is always present (cf : R3 response) - if ( (Cmd != AT91C_SDCARD_APP_OP_COND_CMD) && (Cmd != AT91C_MMC_SEND_OP_COND_CMD) ) - return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR); - else - { - if (error != AT91C_MCI_RCRCE) - return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR); - } - } - return AT91C_CMD_SEND_OK; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_SDCard_SendAppCommand -//* \brief Specific function to send a specific command to the SDCard -//*---------------------------------------------------------------------------- -int AT91F_MCI_SDCard_SendAppCommand ( - AT91PS_MciDevice pMCI_Device, - unsigned int Cmd_App, - unsigned int Arg ) -{ - unsigned int status; - //unsigned int tick=0; - - // Send the CMD55 for application specific command - AT91C_BASE_MCI->MCI_ARGR = (pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address << 16 ); - AT91C_BASE_MCI->MCI_CMDR = AT91C_APP_CMD; - - // wait for CMDRDY Status flag to read the response - do - { - status = AT91C_BASE_MCI->MCI_SR; - //tick++; - } - while( !(status & AT91C_MCI_CMDRDY) );//&& (tick<100) ); - - // if an error occurs - if (((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR) != 0 ) - return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR); - - // check if it is a specific command and then send the command - if ( (Cmd_App && AT91C_SDCARD_APP_ALL_CMD) == 0) - return AT91C_CMD_SEND_ERROR; - - return( AT91F_MCI_SendCommand(pMCI_Device,Cmd_App,Arg) ); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_GetStatus -//* \brief Addressed card sends its status register -//*---------------------------------------------------------------------------- -int AT91F_MCI_GetStatus(AT91PS_MciDevice pMCI_Device,unsigned int relative_card_address) -{ - if (AT91F_MCI_SendCommand(pMCI_Device, - AT91C_SEND_STATUS_CMD, - relative_card_address <<16) == AT91C_CMD_SEND_OK) - return (AT91C_BASE_MCI->MCI_RSPR[0]); - - return AT91C_CMD_SEND_ERROR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_Device_Handler -//* \brief MCI C interrupt handler -//*---------------------------------------------------------------------------- -void AT91F_MCI_Device_Handler( - AT91PS_MciDevice pMCI_Device, - unsigned int status) -{ - // If End of Tx Buffer Empty interrupt occurred - if ( status & AT91C_MCI_TXBUFE ) - { - AT91C_BASE_MCI->MCI_IDR = AT91C_MCI_TXBUFE; - AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_TXTDIS; - - pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_IDLE; - } // End of if AT91C_MCI_TXBUFF - - // If End of Rx Buffer Full interrupt occurred - if ( status & AT91C_MCI_RXBUFF ) - { - AT91C_BASE_MCI->MCI_IDR = AT91C_MCI_RXBUFF; - AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_RXTDIS; - - pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_IDLE; - } // End of if AT91C_MCI_RXBUFF - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_Handler -//* \brief MCI Handler -//*---------------------------------------------------------------------------- -void AT91F_MCI_Handler(void) -{ - int status; - - status = ( AT91C_BASE_MCI->MCI_SR & AT91C_BASE_MCI->MCI_IMR ); - - AT91F_MCI_Device_Handler(&MCI_Device,status); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_ReadBlock -//* \brief Read an ENTIRE block or PARTIAL block -//*---------------------------------------------------------------------------- -int AT91F_MCI_ReadBlock( - AT91PS_MciDevice pMCI_Device, - int src, - unsigned int *dataBuffer, - int sizeToRead ) -{ - //////////////////////////////////////////////////////////////////////////////////////////// - if(pMCI_Device->pMCI_DeviceDesc->state != AT91C_MCI_IDLE) - return AT91C_READ_ERROR; - - if( (AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address) & AT91C_SR_READY_FOR_DATA) != AT91C_SR_READY_FOR_DATA) - return AT91C_READ_ERROR; - - if ( (src + sizeToRead) > pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity ) - return AT91C_READ_ERROR; - - // If source does not fit a begin of a block - if ( (src % pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) != 0 ) - return AT91C_READ_ERROR; - - // Test if the MMC supports Partial Read Block - // ALWAYS SUPPORTED IN SD Memory Card - if( (sizeToRead < pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) - && (pMCI_Device->pMCI_DeviceFeatures->Read_Partial == 0x00) ) - return AT91C_READ_ERROR; - - if( sizeToRead > pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) - return AT91C_READ_ERROR; - //////////////////////////////////////////////////////////////////////////////////////////// - - // Init Mode Register - AT91C_BASE_MCI->MCI_MR |= ((pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length << 16) | AT91C_MCI_PDCMODE); - - if (sizeToRead %4) - sizeToRead = (sizeToRead /4)+1; - else - sizeToRead = sizeToRead/4; - - AT91C_BASE_PDC_MCI->PDC_PTCR = (AT91C_PDC_TXTDIS | AT91C_PDC_RXTDIS); - AT91C_BASE_PDC_MCI->PDC_RPR = (unsigned int)dataBuffer; - AT91C_BASE_PDC_MCI->PDC_RCR = sizeToRead; - - // Send the Read single block command - if ( AT91F_MCI_SendCommand(pMCI_Device, AT91C_READ_SINGLE_BLOCK_CMD, src) != AT91C_CMD_SEND_OK ) - return AT91C_READ_ERROR; - - pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_RX_SINGLE_BLOCK; - - // Enable AT91C_MCI_RXBUFF Interrupt - AT91C_BASE_MCI->MCI_IER = AT91C_MCI_RXBUFF; - - // (PDC) Receiver Transfer Enable - AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_RXTEN; - - return AT91C_READ_OK; -} - - -#ifdef ENABLE_WRITE -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_WriteBlock -//* \brief Write an ENTIRE block but not always PARTIAL block !!! -//*---------------------------------------------------------------------------- -int AT91F_MCI_WriteBlock( - AT91PS_MciDevice pMCI_Device, - int dest, - unsigned int *dataBuffer, - int sizeToWrite ) -{ - //////////////////////////////////////////////////////////////////////////////////////////// - if( pMCI_Device->pMCI_DeviceDesc->state != AT91C_MCI_IDLE) - return AT91C_WRITE_ERROR; - - if( (AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address) & AT91C_SR_READY_FOR_DATA) != AT91C_SR_READY_FOR_DATA) - return AT91C_WRITE_ERROR; - - if ( (dest + sizeToWrite) > pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity ) - return AT91C_WRITE_ERROR; - - // If source does not fit a begin of a block - if ( (dest % pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) != 0 ) - return AT91C_WRITE_ERROR; - - // Test if the MMC supports Partial Write Block - if( (sizeToWrite < pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length) - && (pMCI_Device->pMCI_DeviceFeatures->Write_Partial == 0x00) ) - return AT91C_WRITE_ERROR; - - if( sizeToWrite > pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length ) - return AT91C_WRITE_ERROR; - //////////////////////////////////////////////////////////////////////////////////////////// - - // Init Mode Register - AT91C_BASE_MCI->MCI_MR |= ((pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length << 16) | AT91C_MCI_PDCMODE); - - if (sizeToWrite %4) - sizeToWrite = (sizeToWrite /4)+1; - else - sizeToWrite = sizeToWrite/4; - - // Init PDC for write sequence - AT91C_BASE_PDC_MCI->PDC_PTCR = (AT91C_PDC_TXTDIS | AT91C_PDC_RXTDIS); - AT91C_BASE_PDC_MCI->PDC_TPR = (unsigned int) dataBuffer; - AT91C_BASE_PDC_MCI->PDC_TCR = sizeToWrite; - - // Send the write single block command - if ( AT91F_MCI_SendCommand(pMCI_Device, AT91C_WRITE_BLOCK_CMD, dest) != AT91C_CMD_SEND_OK) - return AT91C_WRITE_ERROR; - - pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_TX_SINGLE_BLOCK; - - // Enable AT91C_MCI_TXBUFE Interrupt - AT91C_BASE_MCI->MCI_IER = AT91C_MCI_TXBUFE; - - // Enables TX for PDC transfert requests - AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_TXTEN; - - return AT91C_WRITE_OK; -} -#endif - -#ifdef MMC -//*------------------------------------------------------------------------------------------------------------ -//* \fn AT91F_MCI_MMC_SelectCard -//* \brief Toggles a card between the Stand_by and Transfer states or between Programming and Disconnect states -//*------------------------------------------------------------------------------------------------------------ -int AT91F_MCI_MMC_SelectCard(AT91PS_MciDevice pMCI_Device, unsigned int relative_card_address) -{ - int status; - - //* Check if the MMC card chosen is already the selected one - status = AT91F_MCI_GetStatus(pMCI_Device,relative_card_address); - - if (status < 0) - return AT91C_CARD_SELECTED_ERROR; - - if ((status & AT91C_SR_CARD_SELECTED) == AT91C_SR_CARD_SELECTED) - return AT91C_CARD_SELECTED_OK; - - //* Search for the MMC Card to be selected, status = the Corresponding Device Number - status = 0; - while( (pMCI_Device->pMCI_DeviceFeatures[status].Relative_Card_Address != relative_card_address) - && (status < AT91C_MAX_MCI_CARDS) ) - status++; - - if (status > AT91C_MAX_MCI_CARDS) - return AT91C_CARD_SELECTED_ERROR; - - if (AT91F_MCI_SendCommand( pMCI_Device, - AT91C_SEL_DESEL_CARD_CMD, - pMCI_Device->pMCI_DeviceFeatures[status].Relative_Card_Address << 16) == AT91C_CMD_SEND_OK) - return AT91C_CARD_SELECTED_OK; - return AT91C_CARD_SELECTED_ERROR; -} -#endif - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_GetCSD -//* \brief Asks to the specified card to send its CSD -//*---------------------------------------------------------------------------- -int AT91F_MCI_GetCSD (AT91PS_MciDevice pMCI_Device, unsigned int relative_card_address , unsigned int * response) -{ - - if(AT91F_MCI_SendCommand(pMCI_Device, - AT91C_SEND_CSD_CMD, - (relative_card_address << 16)) != AT91C_CMD_SEND_OK) - return AT91C_CMD_SEND_ERROR; - - response[0] = AT91C_BASE_MCI->MCI_RSPR[0]; - response[1] = AT91C_BASE_MCI->MCI_RSPR[1]; - response[2] = AT91C_BASE_MCI->MCI_RSPR[2]; - response[3] = AT91C_BASE_MCI->MCI_RSPR[3]; - - return AT91C_CMD_SEND_OK; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_SetBlocklength -//* \brief Select a block length for all following block commands (R/W) -//*---------------------------------------------------------------------------- -int AT91F_MCI_SetBlocklength(AT91PS_MciDevice pMCI_Device,unsigned int length) -{ - return( AT91F_MCI_SendCommand(pMCI_Device, AT91C_SET_BLOCKLEN_CMD, length) ); -} - -#ifdef MMC -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_MMC_GetAllOCR -//* \brief Asks to all cards to send their operations conditions -//*---------------------------------------------------------------------------- -int AT91F_MCI_MMC_GetAllOCR (AT91PS_MciDevice pMCI_Device) -{ - unsigned int response =0x0; - - while(1) - { - response = AT91F_MCI_SendCommand(pMCI_Device, - AT91C_MMC_SEND_OP_COND_CMD, - AT91C_MMC_HOST_VOLTAGE_RANGE); - if (response != AT91C_CMD_SEND_OK) - return AT91C_INIT_ERROR; - - response = AT91C_BASE_MCI->MCI_RSPR[0]; - - if ( (response & AT91C_CARD_POWER_UP_BUSY) == AT91C_CARD_POWER_UP_BUSY) - return(response); - } -} -#endif - -#ifdef MMC -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_MMC_GetAllCID -//* \brief Asks to the MMC on the chosen slot to send its CID -//*---------------------------------------------------------------------------- -int AT91F_MCI_MMC_GetAllCID (AT91PS_MciDevice pMCI_Device, unsigned int *response) -{ - int Nb_Cards_Found=-1; - - while(1) - { - if(AT91F_MCI_SendCommand(pMCI_Device, - AT91C_MMC_ALL_SEND_CID_CMD, - AT91C_NO_ARGUMENT) != AT91C_CMD_SEND_OK) - return Nb_Cards_Found; - else - { - Nb_Cards_Found = 0; - //* Assignation of the relative address to the MMC CARD - pMCI_Device->pMCI_DeviceFeatures[Nb_Cards_Found].Relative_Card_Address = Nb_Cards_Found + AT91C_FIRST_RCA; - //* Set the insert flag - pMCI_Device->pMCI_DeviceFeatures[Nb_Cards_Found].Card_Inserted = AT91C_MMC_CARD_INSERTED; - - if (AT91F_MCI_SendCommand(pMCI_Device, - AT91C_MMC_SET_RELATIVE_ADDR_CMD, - (Nb_Cards_Found + AT91C_FIRST_RCA) << 16) != AT91C_CMD_SEND_OK) - return AT91C_CMD_SEND_ERROR; - - //* If no error during assignation address ==> Increment Nb_cards_Found - Nb_Cards_Found++ ; - } - } -} -#endif -#ifdef MMC -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_MMC_Init -//* \brief Return the MMC initialisation status -//*---------------------------------------------------------------------------- -int AT91F_MCI_MMC_Init (AT91PS_MciDevice pMCI_Device) -{ - unsigned int tab_response[4]; - unsigned int mult,blocknr; - unsigned int i,Nb_Cards_Found=0; - - //* Resets all MMC Cards in Idle state - AT91F_MCI_SendCommand(pMCI_Device, AT91C_MMC_GO_IDLE_STATE_CMD, AT91C_NO_ARGUMENT); - - if(AT91F_MCI_MMC_GetAllOCR(pMCI_Device) == AT91C_INIT_ERROR) - return AT91C_INIT_ERROR; - - Nb_Cards_Found = AT91F_MCI_MMC_GetAllCID(pMCI_Device,tab_response); - if (Nb_Cards_Found != AT91C_CMD_SEND_ERROR) - { - //* Set the Mode Register - AT91C_BASE_MCI->MCI_MR = AT91C_MCI_MR_PDCMODE; - - for(i = 0; i < Nb_Cards_Found; i++) - { - if (AT91F_MCI_GetCSD(pMCI_Device, - pMCI_Device->pMCI_DeviceFeatures[i].Relative_Card_Address, - tab_response) != AT91C_CMD_SEND_OK) - pMCI_Device->pMCI_DeviceFeatures[i].Relative_Card_Address = 0; - else - { - pMCI_Device->pMCI_DeviceFeatures[i].Max_Read_DataBlock_Length = 1 << ((tab_response[1] >> AT91C_CSD_RD_B_LEN_S) & AT91C_CSD_RD_B_LEN_M ); - pMCI_Device->pMCI_DeviceFeatures[i].Max_Write_DataBlock_Length = 1 << ((tab_response[3] >> AT91C_CSD_WBLEN_S) & AT91C_CSD_WBLEN_M ); - pMCI_Device->pMCI_DeviceFeatures[i].Sector_Size = 1 + ((tab_response[2] >> AT91C_CSD_v22_SECT_SIZE_S) & AT91C_CSD_v22_SECT_SIZE_M ); - pMCI_Device->pMCI_DeviceFeatures[i].Read_Partial = (tab_response[1] >> AT91C_CSD_RD_B_PAR_S) & AT91C_CSD_RD_B_PAR_M; - pMCI_Device->pMCI_DeviceFeatures[i].Write_Partial = (tab_response[3] >> AT91C_CSD_WBLOCK_P_S) & AT91C_CSD_WBLOCK_P_M; - - // None in MMC specification version 2.2 - pMCI_Device->pMCI_DeviceFeatures[i].Erase_Block_Enable = 0; - - pMCI_Device->pMCI_DeviceFeatures[i].Read_Block_Misalignment = (tab_response[1] >> AT91C_CSD_RD_B_MIS_S) & AT91C_CSD_RD_B_MIS_M; - pMCI_Device->pMCI_DeviceFeatures[i].Write_Block_Misalignment = (tab_response[1] >> AT91C_CSD_WR_B_MIS_S) & AT91C_CSD_WR_B_MIS_M; - - //// Compute Memory Capacity - // compute MULT - mult = 1 << ( ((tab_response[2] >> AT91C_CSD_C_SIZE_M_S) & AT91C_CSD_C_SIZE_M_M) + 2 ); - // compute MSB of C_SIZE - blocknr = ((tab_response[1] >> AT91C_CSD_CSIZE_H_S) & AT91C_CSD_CSIZE_H_M) << 2; - // compute MULT * (LSB of C-SIZE + MSB already computed + 1) = BLOCKNR - blocknr = mult * ( ( blocknr + ( (tab_response[2] >> AT91C_CSD_CSIZE_L_S) & AT91C_CSD_CSIZE_L_M) ) + 1 ); - - pMCI_Device->pMCI_DeviceFeatures[i].Memory_Capacity = pMCI_Device->pMCI_DeviceFeatures[i].Max_Read_DataBlock_Length * blocknr; - //// End of Compute Memory Capacity - - } // end of else - } // end of for - - return AT91C_INIT_OK; - } // end of if - - return AT91C_INIT_ERROR; -} -#endif - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_SDCard_GetOCR -//* \brief Asks to all cards to send their operations conditions -//*---------------------------------------------------------------------------- -int AT91F_MCI_SDCard_GetOCR (AT91PS_MciDevice pMCI_Device) -{ - unsigned int response =0x0; - - // The RCA to be used for CMD55 in Idle state shall be the card's default RCA=0x0000. - pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address = 0x0; - - while( (response & AT91C_CARD_POWER_UP_BUSY) != AT91C_CARD_POWER_UP_BUSY ) - { - response = AT91F_MCI_SDCard_SendAppCommand(pMCI_Device, - AT91C_SDCARD_APP_OP_COND_CMD, - AT91C_MMC_HOST_VOLTAGE_RANGE); - if (response != AT91C_CMD_SEND_OK) - return AT91C_INIT_ERROR; - - response = AT91C_BASE_MCI->MCI_RSPR[0]; - } - - return(AT91C_BASE_MCI->MCI_RSPR[0]); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_SDCard_GetCID -//* \brief Asks to the SDCard on the chosen slot to send its CID -//*---------------------------------------------------------------------------- -int AT91F_MCI_SDCard_GetCID (AT91PS_MciDevice pMCI_Device, unsigned int *response) -{ - if(AT91F_MCI_SendCommand(pMCI_Device, - AT91C_ALL_SEND_CID_CMD, - AT91C_NO_ARGUMENT) != AT91C_CMD_SEND_OK) - return AT91C_CMD_SEND_ERROR; - - response[0] = AT91C_BASE_MCI->MCI_RSPR[0]; - response[1] = AT91C_BASE_MCI->MCI_RSPR[1]; - response[2] = AT91C_BASE_MCI->MCI_RSPR[2]; - response[3] = AT91C_BASE_MCI->MCI_RSPR[3]; - - return AT91C_CMD_SEND_OK; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_SDCard_SetBusWidth -//* \brief Set bus width for SDCard -//*---------------------------------------------------------------------------- -int AT91F_MCI_SDCard_SetBusWidth(AT91PS_MciDevice pMCI_Device) -{ - volatile int ret_value; - char bus_width; - - do - { - ret_value =AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address); - } - while((ret_value > 0) && ((ret_value & AT91C_SR_READY_FOR_DATA) == 0)); - - // Select Card - AT91F_MCI_SendCommand(pMCI_Device, - AT91C_SEL_DESEL_CARD_CMD, - (pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address)<<16); - - // Set bus width for Sdcard - if(pMCI_Device->pMCI_DeviceDesc->SDCard_bus_width == AT91C_MCI_SCDBUS) - bus_width = AT91C_BUS_WIDTH_4BITS; - else bus_width = AT91C_BUS_WIDTH_1BIT; - - if (AT91F_MCI_SDCard_SendAppCommand(pMCI_Device,AT91C_SDCARD_SET_BUS_WIDTH_CMD,bus_width) != AT91C_CMD_SEND_OK) - return AT91C_CMD_SEND_ERROR; - - return AT91C_CMD_SEND_OK; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_SDCard_Init -//* \brief Return the SDCard initialisation status -//*---------------------------------------------------------------------------- -int AT91F_MCI_SDCard_Init (AT91PS_MciDevice pMCI_Device) -{ - unsigned int tab_response[4]; - unsigned int mult,blocknr; - - AT91F_MCI_SendCommand(pMCI_Device, AT91C_GO_IDLE_STATE_CMD, AT91C_NO_ARGUMENT); - - if(AT91F_MCI_SDCard_GetOCR(pMCI_Device) == AT91C_INIT_ERROR) - return AT91C_INIT_ERROR; - - if (AT91F_MCI_SDCard_GetCID(pMCI_Device,tab_response) == AT91C_CMD_SEND_OK) - { - pMCI_Device->pMCI_DeviceFeatures->Card_Inserted = AT91C_SD_CARD_INSERTED; - - if (AT91F_MCI_SendCommand(pMCI_Device, AT91C_SET_RELATIVE_ADDR_CMD, 0) == AT91C_CMD_SEND_OK) - { - pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address = (AT91C_BASE_MCI->MCI_RSPR[0] >> 16); - if (AT91F_MCI_GetCSD(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address,tab_response) == AT91C_CMD_SEND_OK) - { - pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length = 1 << ((tab_response[1] >> AT91C_CSD_RD_B_LEN_S) & AT91C_CSD_RD_B_LEN_M ); - pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length = 1 << ((tab_response[3] >> AT91C_CSD_WBLEN_S) & AT91C_CSD_WBLEN_M ); - pMCI_Device->pMCI_DeviceFeatures->Sector_Size = 1 + ((tab_response[2] >> AT91C_CSD_v21_SECT_SIZE_S) & AT91C_CSD_v21_SECT_SIZE_M ); - pMCI_Device->pMCI_DeviceFeatures->Read_Partial = (tab_response[1] >> AT91C_CSD_RD_B_PAR_S) & AT91C_CSD_RD_B_PAR_M; - pMCI_Device->pMCI_DeviceFeatures->Write_Partial = (tab_response[3] >> AT91C_CSD_WBLOCK_P_S) & AT91C_CSD_WBLOCK_P_M; - pMCI_Device->pMCI_DeviceFeatures->Erase_Block_Enable = (tab_response[3] >> AT91C_CSD_v21_ER_BLEN_EN_S) & AT91C_CSD_v21_ER_BLEN_EN_M; - pMCI_Device->pMCI_DeviceFeatures->Read_Block_Misalignment = (tab_response[1] >> AT91C_CSD_RD_B_MIS_S) & AT91C_CSD_RD_B_MIS_M; - pMCI_Device->pMCI_DeviceFeatures->Write_Block_Misalignment = (tab_response[1] >> AT91C_CSD_WR_B_MIS_S) & AT91C_CSD_WR_B_MIS_M; - - //// Compute Memory Capacity - // compute MULT - mult = 1 << ( ((tab_response[2] >> AT91C_CSD_C_SIZE_M_S) & AT91C_CSD_C_SIZE_M_M) + 2 ); - // compute MSB of C_SIZE - blocknr = ((tab_response[1] >> AT91C_CSD_CSIZE_H_S) & AT91C_CSD_CSIZE_H_M) << 2; - // compute MULT * (LSB of C-SIZE + MSB already computed + 1) = BLOCKNR - blocknr = mult * ( ( blocknr + ( (tab_response[2] >> AT91C_CSD_CSIZE_L_S) & AT91C_CSD_CSIZE_L_M) ) + 1 ); - - pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity = pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length * blocknr; - //// End of Compute Memory Capacity - printf("SD-Card: %d Bytes\n\r", pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity); - - if( AT91F_MCI_SDCard_SetBusWidth(pMCI_Device) == AT91C_CMD_SEND_OK ) - { - if (AT91F_MCI_SetBlocklength(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) == AT91C_CMD_SEND_OK) - return AT91C_INIT_OK; - } - } - } - } - return AT91C_INIT_ERROR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_CfgDevice -//* \brief This function is used to initialise MMC or SDCard Features -//*---------------------------------------------------------------------------- -void AT91F_CfgDevice(void) -{ - // Init Device Structure - - MCI_Device_Features.Relative_Card_Address = 0; - MCI_Device_Features.Card_Inserted = AT91C_CARD_REMOVED; - MCI_Device_Features.Max_Read_DataBlock_Length = 0; - MCI_Device_Features.Max_Write_DataBlock_Length = 0; - MCI_Device_Features.Read_Partial = 0; - MCI_Device_Features.Write_Partial = 0; - MCI_Device_Features.Erase_Block_Enable = 0; - MCI_Device_Features.Sector_Size = 0; - MCI_Device_Features.Memory_Capacity = 0; - - MCI_Device_Desc.state = AT91C_MCI_IDLE; - MCI_Device_Desc.SDCard_bus_width = AT91C_MCI_SCDBUS; - - // Init AT91S_DataFlash Global Structure, by default AT45DB choosen !!! - MCI_Device.pMCI_DeviceDesc = &MCI_Device_Desc; - MCI_Device.pMCI_DeviceFeatures = &MCI_Device_Features; - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_Init -//* \brief Initialsise Card -//*---------------------------------------------------------------------------- -int AT91F_MCI_Init(void) -{ - -/////////////////////////////////////////////////////////////////////////////////////////// -// MCI Init : common to MMC and SDCard -/////////////////////////////////////////////////////////////////////////////////////////// - - // Set up PIO SDC_TYPE to switch on MMC/SDCard and not DataFlash Card - AT91F_PIO_CfgOutput(AT91C_BASE_PIOB,AT91C_PIO_PB7); - AT91F_PIO_SetOutput(AT91C_BASE_PIOB,AT91C_PIO_PB7); - - // Init MCI for MMC and SDCard interface - AT91F_MCI_CfgPIO(); - AT91F_MCI_CfgPMC(); - AT91F_PDC_Open(AT91C_BASE_PDC_MCI); - - // Disable all the interrupts - AT91C_BASE_MCI->MCI_IDR = 0xFFFFFFFF; - - // Init MCI Device Structures - AT91F_CfgDevice(); - - // Configure MCI interrupt - AT91F_AIC_ConfigureIt(AT91C_BASE_AIC, - AT91C_ID_MCI, - AT91C_AIC_PRIOR_HIGHEST, - AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE, - AT91F_ASM_MCI_Handler); - - // Enable MCI interrupt - AT91F_AIC_EnableIt(AT91C_BASE_AIC,AT91C_ID_MCI); - - // Enable Receiver - AT91F_US_EnableRx((AT91PS_USART) AT91C_BASE_DBGU); - - AT91F_MCI_Configure(AT91C_BASE_MCI, - AT91C_MCI_DTOR_1MEGA_CYCLES, - AT91C_MCI_MR_PDCMODE, // 15MHz for MCK = 60MHz (CLKDIV = 1) - AT91C_MCI_SDCARD_4BITS_SLOTA); - - if(AT91F_MCI_SDCard_Init(&MCI_Device) != AT91C_INIT_OK) - return FALSE; - else - return TRUE; - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCIDeviceWaitReady -//* \brief Wait for MCI Device ready -//*---------------------------------------------------------------------------- -void AT91F_MCIDeviceWaitReady(unsigned int timeout) -{ - volatile int status; - - do - { - status = AT91C_BASE_MCI->MCI_SR; - timeout--; - } - while( !(status & AT91C_MCI_NOTBUSY) && (timeout>0) ); -} - -unsigned int swab32(unsigned int data) -{ - unsigned int res = 0; - - res = (data & 0x000000ff) << 24 | - (data & 0x0000ff00) << 8 | - (data & 0x00ff0000) >> 8 | - (data & 0xff000000) >> 24; - - return res; -} - -//*-------------------------------------------------------------------- -//* \fn AT91F_MCI_ReadBlockSwab -//* \brief Read Block and swap byte order -//*-------------------------------------------------------------------- -int AT91F_MCI_ReadBlockSwab( - AT91PS_MciDevice pMCI_Device, - int src, - unsigned int *databuffer, - int sizeToRead) -{ - int i; - unsigned char *buf = (unsigned char *)databuffer; - - //* Read Block 1 - for(i=0;i<BUFFER_SIZE_MCI_DEVICE;i++) - *buf++ = 0x00; - AT91F_MCI_ReadBlock(&MCI_Device,src,databuffer,sizeToRead); - - //* Wait end of Read - AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT); - - { - int index; - unsigned int *uiBuffer = databuffer; - - for(index = 0; index < 512/4; index++) - uiBuffer[index] = swab32(uiBuffer[index]); - } - return(1); -} - diff --git a/target/linux/at91/image/dfboot/src/stdio.h b/target/linux/at91/image/dfboot/src/stdio.h deleted file mode 100644 index e4e35ec..0000000 --- a/target/linux/at91/image/dfboot/src/stdio.h +++ /dev/null @@ -1,18 +0,0 @@ -#include <stdarg.h> -#include <stdbool.h> - -#ifndef NULL -#define NULL ((void *)0) -#endif - -void at91_init_uarts(void); -int puts(const char *str); -int putc(int c); -int putchar(int c); -int getc(); - -int strlen(const char *str); - -int hvfprintf(const char *fmt, va_list ap); - -int printf(const char *fmt, ...); |